BRR:9708182 Supply Of Supply, Installation, Testing And Commissioning Of Crew Voice & Video Recording System (Cvvrs) For Hhp Dual Cab Diesel Locomotives (Ip Based Video Surveillance System) As Per Rdso Specification No. Rdso/Spn/Tc/106/2025 Version 3.1 Issued On 04.06.2025 (Excluding Rdas).Other Details As Per Annexures I,Ii,Iii & Iv Attached.Supply, Installation, Testing And Commissioning Of Crew Voice & Video Recording System (Cvvrs) For Hhp Dual Cab Diesel Locomotives (Ip Based Video Surveillance System) As Per Rdso Specification No. Rdso/Spn/Tc/106/2025 Version 3.1 Issued On 04.06.2025 (Excluding Rdas).Other Details As Per Annexures I,Ii,Iii & Iv Attached.,Supply, Installation, Testing And Commissioning Of Crew Voice & Video Recording System (C Vvrs) For Hhp Dual Cab Diesel Locomotives (Ip Based Video Surveillance System) As Per Rdso Specification No. Rdso/Spn/Tc/106/2025 Version 3.1 Issued On 04.06.2025 (Excluding Rdas).Other Details As Per Annex Ures I,Ii,Iii & Iv Attached. [ Warranty Period: 30 Months After The Date Of Delivery ] [Quantity Tolerance (+/-): 5 %Age , Item Category : Normal , Total Po Value Variation Permitted: Max 8 Lacs ] ]

BRR:9707338 Supply Of Supply And Commissioning Of Cctv Systemsupply And Commissioning Of Cctv System,Supply And Commissioning Of Cctv System (Observation / Surveillance) For Detcs To Specific Ation No. Icf / Elect /Ohe /009 Rev.01, Cs-00 Dtd.14.10.2019. [ Warranty Period: 30 Months After The Da Te Of Delivery ] ]

BRR:9707137 Bids Are Invited For Amc Of Integrated Security And Surveillance System - Theft Prevention, Monitor Operations, Outdoor Perimeter Security; Comprehensive; Hardware, Software, Networking System, License; Consumables To Be Provided By Service Provider (Included In The Cont..

BRR:9706950 Bids Are Invited For Amc Of Integrated Security And Surveillance System - Cwan; Comprehensive; Hardware, Software, Wireless System, Networking System, Firewall; Consumables To Be Provided By Service Provider (Included In The Contract Cost); Educational; Command Control C..

BRR:9705710 Bids Are Invited For Integrated Security Surveillance System Service - Theft Prevention, Remote Video Monitoring, Monitor Operations, Public Safety; Recording Devices; High Media Quality; Buyer’S Premises; Na; Na; Na; Fully Integrated Pa System; No

BRR:9705709 Bids Are Invited For Integrated Security Surveillance System Service - Theft Prevention, Remote Video Monitoring, Monitor Operations, Public Safety; Recording Devices; High Media Quality; Buyer’S Premises; Na; Na; Na; Na; No

BRR:9705708 Bids Are Invited For Integrated Security Surveillance System Service - Theft Prevention, Remote Video Monitoring, Facility/Asset Protection, Public Safety; Recording Devices; High Media Quality; Buyer’S Premises; Na; Na; Na; Fully Integrated Pa System; No

BRR:9705379 Bids Are Invited For Integrated Security Surveillance System Service - Remote Video Monitoring, Facility/Asset Protection, Monitor Operations, Employee Safety, Event Video Surveillance, Outdoor Perimeter Security; Network Attached Storage; High Media Quality; Buyer’S Pre..

BRR:9703818 Bids Are Invited For Amc Of Integrated Security And Surveillance System - Cctv Surveillance System; Comprehensive; Hardware, Software, Networking System, All The Cables Including Optical And Cat6; Consumables To Be Provided By Service Provider (Included In The Contract C..

BRR:9702368 Bids Are Invited For Cctv Surveillance System Total Quantity : 1

BRR:9702154 Bids Are Invited For Integrated Security Surveillance System Service - Public Safety; Recording Devices; Maximum Security Footage; Buyer’S Premises; Role- Based Access Control System (Rbac); Na; Na; Na; No

BRR:9701403 Bids Are Invited For Integrated Security Surveillance System Service - Remote Video Monitoring; Recording Devices; High Media Quality; Buyer’S Premises; Na; Na; Na; Na; No

BRR:9699545 Tender for Deposit-Supply And Installation Of Cctv Surveillance System At Transit Home For Women And Child ,Alappuzha-Cctv-General Electronics Work

BRR:9699379 Invitation of e-tender for various arrangements to be made during Ganpati Immersion programme at Girgaum Chowpatty in D Ward (Video Shooting & Photography, CCTV, LED Screen, etc.).= 1 Invitation of e-tender for various arrangements to be made during Ganpati Immersion programme at Girgaum Chowpatty in D Ward (Video Shooting & Photography, CCTV, LED Screen, etc.). 2 Drone Camera on Last Day of Visarjan 3 LED Screen of Size 10X20 on last day of visarjan 4 Live setup for youtube & LED Screen with necessary interenet connection 5 Hiring of 4. nos of Videographer with HD Quality Camera during ganeshotsav 2023 6 Hiring of Videographer with HD Quality Camera for 4 days 7 Hiring of 2 nos ofPhotographer with HD Quality camera on Ganesh Chaturthi 8 Hiring of Photographer with HD Quality camera for 4 days 9 Live mixing & relay on LED screen at various spot on last day of ganeshchaturthi 10 Youtube & facebook live on last day of Ganesh Chaturthi 11 Jimmy Jeeb to shoot live moments on last day of Ganesh Chaturthi 12 Hiring of 16 nos. of IP camera for CCTV surveillance 13 Hiring of 4 nos. of rotating camera CCTV surveillance 14 Hiring of 5 nos. of PTZ camera for CCTV surveillance on last day of Ganeshchaturthi 15 Suitable NVR for recording for CCTV Surveillance 16 CCTV recording in Hard Disk 17 Suitable Monitor for CCTV surveillance 18 Hiring of 12 Nos. of 42 Plasma TV on last day of Gnaesh Chaturthi 19 Video Recording in Hard Disk 20 Walky Talky for operator 21 Karizma Album of 20 pages 22 Providing Live telecast for Media with optical fibre, switcher & other equipment 23 Flower Blaster at Entrance on last day of Ganesh Chaturthi 24 Live telecast for media with optical fibre and switcher

BRR:9699370 Tender for Supply Installation Testing and Commissioning of Cctv Surveillance System At Shrimad Rajchandra Marg In D Ward

BRR:9697637 Supply Of Provision, Installation, And Commissioning Of Cctv Surveillance System At The Rolling-In And Rolling-Out Points Of Platform Nos. 13 & 14 At Dadar. The Work Shall Be Executed On A Comprehensive Turnkey Basis. The Scope Includes Supply And Installation Of 8 Cctv Cameras Along With All Necessary Fixtures, Accessories, And Supporting Infrastructure. The Complete Scope Of Work Is Detailed In The Annexure Enclosedprovision, Installation, And Commissioning Of Cctv Surveillance System At The Rolling-In And Rolling-Out Points Of Platform Nos. 13 & 14 At Dadar. The Work Shall Be Executed On A Comprehensive Turnkey Basis. The Scope Includes Supply And Installation Of 8 Cctv Cameras Along With All Necessary Fixtures, Accessories, And Supporting Infrastructure. The Complete Scope Of Work Is Detailed In The Annexure Enclosed,Provision, Installation, And Commissioning Of Cctv Surveillance System At The Rolling-In And R Olling-Out Points Of Platform Nos. 13 & 14 At Dadar. The Work Shall Be Executed On A Comprehensive Turnke Y Basis. The Scope Includes Supply And Installation Of 8 Cctv Cameras Along With All Necessary Fixtures, Acc Essories, And Supporting Infrastructure. The Complete Scope Of Work Is Detailed In The Annexure Enclosed [ Warranty Period: 30 Months After The Date Of Delivery ] ] Jr.Engineer Coaching Maharashtra 1.00 Set

BRR:9694988 Bids Are Invited For Integrated Security Surveillance System Service - Facility/Asset Protection, Remote Video Monitoring, Theft Prevention, Employee Safety, Parking Lots; Recording Devices; Maximum Security Footage, Ability To Archive Footage, High Media Quality; Buyer’..

BRR:9694637 Tender for Supply Installation Testing and Commissioning of Cctv Camera System For Security Purpose At Malviya Nagar Ward No:-145 Jankapuri-Ist Imali Phatak, Jaipur

BRR:9694636 Tender for Supply Installation Testing and Commissioning of Cctv Camera System For Security Purpose At Malviya Nagar Ward No:-134 Barwa Colony Bajaj Nagar, Jaipur

BRR:9694635 Tender for Supply Installation Testing and Commissioning of Cctv Camera System For Security Purpose At Malviya Nagar Ward No:-128 Aadarsh Block, Mahaveer Nagar, Jaipur

BRR:9694634 Tender for Supply Installation Testing and Commissioning of Cctv Camera System For Security Purpose At Malviya Nagar Ward No:-131, Hansh Marg C Block Malviya Nagar Jaipur

BRR:9694633 Tender for Supply Installation Testing and Commissioning of Cctv Camera System For Security Purpose At Malviya Nagar Ward No:-128 Muktanand Nagar , Jaipur

BRR:9694273 Bids Are Invited For Amc Of Integrated Security And Surveillance System - Monitor Operations; Comprehensive; Hardware, Software, Networking System, License, Cctv, Nvr, Hdd, Cat6 Cable, Moniter, Media Converter, Sfp, Switch; Consumables To Be Provided By Service Provider ..

BRR:9693650 Bids Are Invited For Supply, Installation & Commissioning Of Surveillance System With All Compatible Accessories Total Quantity : 1

BRR:9693397 Bids Are Invited For Amc Of Integrated Security And Surveillance System - Remote Video Monitoring; Comprehensive; Hardware; Cost Of Consumables To Be Provided To Service Provider Based On Actuals; Government Office; Control Room; Depending Upon The System As Mentioned In..

BRR:9693155 Bids Are Invited For Amc Of Integrated Security And Surveillance System - Maintenance Of 60 Cctv Camras; Non-Comprehensive; Software; Consumables To Be Provided By Buyer; Jail; Control Room; Depending Upon The System As Mentioned In The Scope Of Work; Yes; Incident Analy..

BRR:9692324 Bids Are invited for Quad Copter Frame - Surveillance Equipment , Brushless Motor - Surveillance Equipment , Propellers - Surveillance Equipment , Esc - Surveillance Equipment , Flight Controller - Surveillance Equipment , Power Distribution Board - Surveillance Equipment , Gps Module - Surveillance Equipment , Vtx - Surveillance Equipment , Caddx Ratel 1200 Tvl - Surveillance Equipment , Receiver - Surveillance Equipment , Thermal Camera - Surveillance Equipment , Battery - Surveillance Equipment , Servo - Surveillance Equipment , Battery Charger - Surveillance Equipment , Dual Band Controller - Surveillance Equipment , Vrx - Surveillance Equipment , Goggles - Surveillance Equipment , Patch Antenna - Surveillance Equipment , Optical Fiber Spool 5 Km Alongwith Media Convertor - Surveillance Equipment , Optical Fiber Spool 10 Km Alongwith Media Convertorq - Surveillance Equipment , Optical Link Gbd Grount End Plus - Surveillance Equipment Total Quantity : 415

BRR:9692074 Bids Are Invited For Amc Of Integrated Security And Surveillance System - Facility/Asset Protection, Cwan Neworking; Comprehensive; Hardware, Software, Wireless System, Networking System; Consumables To Be Provided By Service Provider (Included In The Contract Cost); Edu..

BRR:9691736 Bids Are invited for 4 Channel Dvr , 2Mp Ahd Camera , 1Tb Surveillance Hdd , 16 Channel Power Supply , 19 Inch Led Monitor Total Quantity : 8

BRR:9690961 Tender For Supply, Installation, Testing And Commissioning Of Digital Discussion System/ Surveillance System And Lan System At Acb Police Station Awantipora.

BRR:9690438 Tender for Cam Of Lan And Internet Networking System Digital Epabx System Ups For Server Of Second Floor In The Office Of The Rc And Wifi Router And Surveillance System Present Exclusively For periodical renewal Rc

BRR:9686637 Tender For Providing Additional Works For Senior Citizen Recreation Center Interior ,Elevation , Furnishing , Gym Equipments , Lift , Surveillance System , Fire Protection , Air Conditioning And Solar Panel At Zonal Iii

BRR:9686345 Tender for Supply And Installation Of Cctv Security Surveillance System In City Baghapurana Distt. Moga

BRR:9685364 Tender for Supply, Erection, Testing And Commissioning Of Cctv (Closed Circuit Television) System At Dudhganga Dam, Kolhapur.

BRR:9682760 Bids Are Invited For Amc Of Integrated Security And Surveillance System - Event Video Surveillance, At K G Hospital Clw Crj For 2 Years; Non-Comprehensive; Hardware, Software, Wireless System, Networking System, Items Mentioned In Annexure-A Of Sla; Cost Of Consumables T..

BRR:9681534 Bids Are Invited For Procurement And Installation Of Cctv Surveillance System Total Quantity : 1

BRR:9680722 Bids Are Invited For Amc Of Integrated Security And Surveillance System - Cctv System; Comprehensive; Hardware, Software, Networking System; Consumables To Be Provided By Service Provider (Included In The Contract Cost); Bank Offices & Establishments; Control Room; Quart..

BRR:9680045 Bids Are Invited For Amc Of Integrated Security And Surveillance System - Theft Prevention, Remote Video Monitoring, Facility/Asset Protection, Monitor Operations, Employee Safety, Parking Lots, Event Video Surveillance; Comprehensive; Hardware, Software, Wireless System..

BRR:9679990 Bids Are Invited For Ip Based Cctv Surveillance System Total Quantity : 1

BRR:9679557 Bids Are Invited For Amc Of Integrated Security And Surveillance System - Public Safety; Non-Comprehensive; Wireless System; Consumables To Be Provided By Service Provider (Included In The Contract Cost); Defence Establishments; Command Control Centre; Depending Upon The..

BRR:9679278 Bids Are Invited For Amc Of Integrated Security And Surveillance System - Health Monitoring Solution For Cctv System; Comprehensive; Hardware, Software, Wireless System, Networking System; Consumables To Be Provided By Service Provider (Included In The Contract Cost); Wa..

BRR:9679198 Bids Are Invited For Amc Of Integrated Security And Surveillance System - Monitor Operations; Comprehensive; Networking System; Consumables To Be Provided By Buyer; Assembly; Control Room; Depending Upon The System As Mentioned In The Scope Of Work; No; Event Analysis& R..

BRR:9679000 Bids Are Invited For Da Jiang I Store Security Surveillance System With Camera Total Quantity : 2

BRR:9706940 Bids Are Invited For Passive Night Vision Binocular (L/W) Total Quantity : 20

BRR:9706806 Bids Are Invited For X Ray Baggage Inspection System As Per Mha Qr (V3) (Q2) Total Quantity : 3

BRR:9705447 Bids Are Invited For Repair And Maintanance X-Ray Baggage Scanning Total Quantity : 1

BRR:9703375 Bids Are Invited For Repair Of X-Ray Baggage Scanner Machine , Repair Of Vehicle Mounted Search Light , Repair To Trial Camera , Repair Of Under Vehicle Search Mirror Detector , Repair Of Hand Held Metal Detector , Repair Of Hand Held Search Light Total Quantity : 36

BRR:9695082 Bids Are Invited For X Ray Baggage Inspection System As Per Mha Qr (V3) (Q2) Total Quantity : 1

BRR:9694998 Bids Are Invited For X-Ray Baggage Scanner Total Quantity : 1

BRR:9682807 Bids Are Invited For Multi Energy X-Ray Baggage Scanner Total Quantity : 2

BRR:9682355 Bids Are Invited For X Ray Baggage Inspection System As Per Mha Qr (V3) (Q2) Total Quantity : 2

BRR:9681307 Bids Are Invited For X Ray Baggage Inspection System As Per Mha Qr (V3) (Q2) Total Quantity : 1

BRR:9706065 Bids Are Invited For Hand Held Metal Detector - Security Metal Detector Total Quantity : 20

BRR:9704857 Bids Are Invited For Door Frame Metal Detector (Q2) Total Quantity : 1

BRR:9703907 Bids Are Invited For Hand Held Metal Detector , Hand Held Metal Detector - Security Metal Detector Hand Held Explosive Detector (Hhed) As Per Mha Qr (V2) Total Quantity : 10

BRR:9699258 Tender for E-Tender For Purchase Of Various Materials And Equipment For The Bomb Detection And Disposal Squad Under The Superintendent Of Police Solapur Rural, Solapur , Search Kit Tool , Han Held Metal Detector , Rsp Tool Kit , First Aid Box , Dangree , Telescopie Prodder , Search Kit Magnifing , Over All Fire Proof

BRR:9692661 Bids Are Invited For Door Frame Metal Detector (Q2) Total Quantity : 2

BRR:9681937 Bids Are Invited For Hand Held Metal Detector As Per Mha Qr (Q2) Total Quantity : 15

BRR:9680340 Bids Are Invited For Traffic Cone , Hand Held Search Lights , Padlock , Door Lock Fingerprint Plus Rfid Card Based Access Control , High Silica Sand , Hand Held Metal Detector , Inverted Mirror Trolley , Road Barrier , Hand Operated Manual Siren Total Quantity : 157

BRR:9708256 Supply Of Supply, Installation, Testing & Commissioning Of Digital Caution Display Unit.Supply, Installation, Testing & Commissioning Of Digital Caution Display Unit.,Supply, Installation, Testing & Commissioning Of Digital Caution Display Unit Having Smart Ope Rating System Integrated With Wi-Fi, Ethernet And Voice Assistant Support With Connectivity Ports And Other A Dditional Features As Per Annexure Attached. [ Warranty Period: 30 Months After The Date Of Delivery ] ] => Limited

BRR:9708077 Supply Of Electronic Weighing Machineelectronic Weighing Machine,Electronic Weighing Machine:- Weighing Capacity & Accuracy:- 1-1000 Kg (With 100Gm Accur Acy) And Should Have Approval Of Accuracy From Government Body/Agency. Audio/Visual Overload Indication Should Be Available. Zero, Tare, Net/Gross Function. Stainless Steel Platform (1.5M X 1.5M) Size Required. Int Erface:- Bi-Directional Rs 232 C/Usb Cable Without Converter (Min 7 Metres). Display:- 7 Segment Digital Fro Nt Display On Pole And Extended Remote Display Having 7 Metre Wire With Bright Led Display. Oem Should B E 9001, Bis Certified. Other Detailed Specifications Are Attached As Annexure. Make Brand : Bajaj, Omron, Zilant, Healthgenie, Cloudcool, Nubex, Hindusthan Scale, Shreyani,Unique Power Technology. [ War Ranty Period: 30 Months After The Date Of Delivery ] ]

BRR:9707942 Supply Of 27 Fhd Display - Ips Display27 Fhd Display - Ips Display,27 Fhd Display - Ips Display, Built In Hd Web Cam, Built In Speakers, Built In Mic, Usb Type- C Port With 90W Charging, Support Tilt, Swivel, Pivot And Height Adjustment/Rotation, 100Hz Refresh Rate, H Dmi Port, Dp Port, Usb A Hub, Panel Colour Black. Preferred Make: - Lg, Samsung, Benq. Reference Model: Lg 27Ba850. [ Warranty Period: 30 Months After The Date Of Delivery ] ] => Limited

BRR:9707813 Supply Of Set Of Digital Torque Wrench 1/4Driveset Of Digital Torque Wrench 1/4Drive,Set Of Digital Torque Wrench 1/4Drive Digital Torque & Angle Wrench Torque Capacity 0.57Nm -11.30Nm With Digital Display And Data Traceability Function Details As Per Annexure Attached. [ Warranty Period: 30 Months After The Date Of Delivery ] ] , Set Of Digital Torque Wrench 3/8Drive Digital Torque & Angle Wrench Torque Capacity 6.8Nm- 135.6Nm With Digital Display And Data Traceability Function Details As Per Annexure Attached. [ Warranty P Eriod: 30 Months After The Date Of Delivery ] ] , Set Of Digital Torque Wrench 1/2Drive Digital Torque & Angle Wrench Torque Capacity 16.9Nm -339Nm With Digital Display And Data Traceability Function & 25 Pcs 1/2 Drive Mechanical Socket Set Details As Per Annexure Attached. [ Warranty Period: 30 Months After The Date Of Delivery ] ]

BRR:9707214 Bids Are Invited For Interactive Panels With Cpu (Q2) Total Quantity : 3

BRR:9707212 Bids Are invited for Register-2Q , Register-3Q , Register-4Q , Electrical Insulation Tape , Teflon Tape , A4 Size 80 Gsm Paper , A4 Size Spiral Binding Sheet - Top And Bottom , Aaa 1.5V Battery , Ball Pen - Black Point , Ball Pen - Blue Point , Battery 1.5V Aa Type , Brown Tape 2 Inch Width , Double Sided Tape , Executive Diary , Glue Stick , File Storage Box , Gum Bottle -150 Ml , Highlighter , Meeting Note Pad , Mouse Pad , Pad Locks , Paper Cutter Knife , Permanent Markers , Plastic Folder L-Shape A4 Size , Plastic Sample Box - 6X4x2.5 Cm , Plastic Sample Box - 200Ml , Plastic Trays , Post Sticker Yellow , Rubber Band - Pack Of 500G , Paper Shredder , Single Hole Punch , Spiral Writing Pad , Stapler Pin No. 24By6 Small , Tissue Paper Box , Transparent Tape 1 Inch , White Board Markers , Zip Lock Covers 3X4 Inches , Zip Lock Covers 4X6 Inches , Zip Lock Cover 5X7 Inches , Stapler Machine Big , Scissors Small , Scissors Big , Metal Tape 10M , White Board Duster , Temporary Marker Ink , Sharpner , Eraser , Lamination Sheet , 9V Battery Total Quantity : 1038

BRR:9707166 Bids Are Invited For Interactive Panels With Cpu (Q2) Total Quantity : 5

BRR:9707119 Bids Are Invited For Interactive Panels With Cpu (Q2) Total Quantity : 2

BRR:9707089 Bids Are Invited For Interactive Panels With Cpu (Q2) Total Quantity : 2

BRR:9707082 Bids Are invited for Metal Tables With Drawers Drawer In Centre With 2 Sides , Metal Tables With Drawers Drawer In Centre With 2 Sides , Filing Cabinet With 4 Drawers , Rolling Chairs For Office Work , Folding Iron Chair With Cushion And Adjustable Wooden Writing Pad , Filing Cabinet With 4 Drawers , Glass Door , Door Shutter , Rolling Chairs For Office Work , Folding Iron Chair With Cushion And Adjustable Wooden Writing Pad , Filing Cabinet With Drawers 4 Drawers , Godrej Cupboard , Godrej Cupboard , L Shaped Office Table , Office Table , Mid Back Visitor Chair , Computer Chairs , Office Chairs , Mesh Chairs , Lab Chairs , Door Plu With Lock Base , Lab Furniture Work Table Or Bench , Rolling Chairs For Office Work , Cubicle , Metal Rack Above Granite For Lab , Wooden Table Or Stool , Steel Ladder , Storage Cabinets With Drawers Below Granite , Storage Cabinets Below Wash Basin , Wall-Mounted Cupboard In The Loft , Notice Boards , Metal Storage Cabinets On The Wall , Filing Cabinets , Locker Cupboard , Metal Cabinet For Workstation , Wall Mount Metal Cabinet , Wall Mount Metal Cabinet , Filing Cabinet With 4 Drawers , Storage Cabinet , Almirah Storage , Personal Lockers , Storage Wall Mounted Cabinet , Customised Aluminium White Colour Storage With Glass Doors And Shelf , Chair , Offcie Chairs , Lab Chairs , Cupboard , Table Size 48Inch X 24Inch 4 Table , Table Size 39Inch X 24Inch , Table Size 36Inch X 30Inch , Storage Pedestal , Chairs , Storage Cupboard , Main Table With Eru , Wooden Storage Cabinet , Cubicle Worskstation With Pedestal With Glass Top , Personal Locker , Storage Cabinet With Granite Top , Wall Mounted Stoarge Cabinet 80 Cm X 60 Cm X 38 Cm Total Quantity : 194

BRR:9707027 Bids Are Invited For ACOUSTIC GUITAR , AerPocket 10 gm , Air Freshner 220 ml , Air Freshner 275 ml , Angle Cock , Anti Slip Floor Door Mat 38 x 58 cm approx Polyprop. , Assam Tea 25 Pieces , Baby Care Gift Pack , Badminton Racquet , Basket Balls Size 6 7 Orange , Basketball Net White , Bathroom Bucket 18 ltr with Mug , Bathroom Plastic Mug 1000 ml , Bib Cock With Nozzle , Bib Cock with wall Flange 2 way , Biscuits 30 gm , Black Hit for mosquito 700Ml , Bottle Trap , Box File Rado File with fabric spine Sud or equivalent , Brasso for metal polish 500 ml , Brown Paper Pencil Box Pkt of 10 Nos , Cell Duro 9V , Chappal , Chart Paper , Chikki Jar 50 Pcs , Cloth Bag Min 30 Qty Handy type 200 GSM , Cloth Bag Min 30 Qty Handy type 300 GSM , Coffee Sachet 72 Sachet , Coir Door Mat 60 x 40 cm approx Coir , Coir Door Mat 75 x 45 cm approx Coir , Colin Big 500 ml Colin or equivalent , CP Extension Nipple 1.5 , CP Extension Nipple 1 , Cubes damer goli 1 Kg , Cup and Saucer Set Glass , Darjeeling Tea 25 Pieces , Dhoop Batti , Dishwash Liquid Gel 2L Refill Pack , Dishwash Powder 1kg , Disposable Paper Eco Friendly Cup 150 ml Pack of 50 , Disposable Paper Eco Friendly Cup 250 ml Pack of 50 , Disposable Paper Plates 11 inch and 4 Compart , Disposable Paper Plates Rectangle 4 Compt , Double Side Tape 1 Wonder 555 or equivalent , Drum Printer Canon C exv 49 , Drum Printer HP 116 , Drum Printer NPG 67 , Dust Bin with Lid SS 8 10 x 24 , Duster glass Yellow , Duster glassVelvet type , Electric Kettle 1.2 Ltr 1500W , Eucalyptus essential oil Nilgiri oil 500 ML , Floor Door Mat 16 x 24 inch approx , Floor Wiper 24 , Girnar Detox Desi Kahwa Green Tea Bags 36 Sachets , Girnar Instant Premix Mellow Lemon 10 Sachets , Girnar Instant Tea Premix 36 Sachets , Glass Soap Dispenser , Glue Stick 8 gm Camel or equivalent , Green Tea Lemon and Honey 25 Pieces , Hand Shower , Hand Shower Hook , Hand Wipe Roll Paper Towels 6 Rolls , Hard broom kharate 500 600 gm Local made , Harpik Blue 5 ltr , Health Faucet , Highlighter Cam Luxor Set of 5 , I Card Holder regular Pl Min 100 qty , I Card Lace Regulr with 1 col Print Min 100 qty , I Card Lace Thick Fabric with 4 col Print Min 60 qty , Incense Sticks , Index File A 4 PP 2 40 D Solo W O or equivalent , Ink 680 Black HP Original , Ink 680 Tri Color HP Original , L Folder PP A4 Exc. Thick Min 50 Qty , L Folder PP F s Exc. Thick Min 50 Qty , Lamination Pouch 125 micron A 4 Pkt of 100 , Lan Tester D link or equivalent , Lan to USB Converter TP link or equivalent , Laser Light Pen Wireless Presenter , Lg Exe Book 3 qr Big , Lg Exe Book 5 qr Big , Lizol 5 Ltr , Luxury Hand wash Foam Soap , Match Box , Milk Creamer Sachets , Mineral water 0.25 ltr HP Pani Bisleri or equivalent Min 50 , Mineral water 0.5 ltr HP Pani Bisleri or equivalent Min 288 , Mosquito bat Hit Mortein or equivalent , Mosquito Machine and 1 Refill , Mosquito Refill Liquid 4 x 45 ml , Multi Fold Paper Towel White , Name Plate SS , Non Dust Broom , Note Book A 4 232 pages SBB , Note Book A 4 320 pages HBB , Note Book A 4 176 pages SBB , Odonil 1 Pkt 50Gm , OHP Marker , Overhead Shower , Panasonic CR2450 Battery , Paper A 3 75 GSM , Paper A 4 75 GSM , Paper Napkin 1 Ply , Pen 0.6mm , Pen 0.7 mm , Pen Roller Ball point pen 0.5 07 mm , Pen drive 32 gb , Pen drive 32 gb Metal , Pen drive 64 gb , Pencil Pkt of 10 Nos , Pencil Cell AA AAA , Permanent Marker Cam Luxor Min 10 No one colour , Phynel White 1 ltr , Plastic Handle Cotton Mop Refill , Plastic Pedal Dustbin for Wet and Dry Waste 2 In 1 with Lid , Plastic Swing Lid Garbage Dustbin with Lid 48 Liters , Plastic Wheel Pedal Dustbin with Lid 240 Liters , Plastic Wheel Pedal Dustbin with Lid 65 Liters , Post it 3 in 1 , Post it 3 X 5 , Post it 3 x3 , Recycled Kraft Paper Pen with Clip Seed , Report File F S Clear , RJ 45 Connector Box Dlink or equivalent , Rubber Band 1st Quality Pkt of 1 Kg , Rubber Hand Gloves Reg , Safety Walk Outdoor Tread , Sambrani Dhoop Cups , Scale Plastic 12 , Scissor 210 mm , Self Ink Stamp 2 3 lines , Self Ink Stamp 5 6 lines , Shaving Foam Gillete or equivalent 50 gm , Shaving Razor , Shoes Shine Sponge , Shower Arm , Shower Tube , Shuttle Nylon , Single Lever Basin Mixer , Sink Cock , Sketch Pen Sml Lux or Equiv. Min 10 set , Soap Dish , Soft broom Phool zadu , Spin Mop , Spin Mop Refill Floor Mop Refill , Spiral Pad Wire 0.7 mm 8 50 mm dia 800 1000 gm pkt , Stainless Steel Double Walled Vacuum Insulated Flask , Stainless Steel Flexible Connection Hose , Stapler 10 Kangaroo or equivalent , Stapler HP 45 Kangaroo or equivalent , Stapler Pin 10 1 Nos 20 Pkt Kangaroo or equivalent , Stapler Pin 24 6 Big Pkt of 20 Kangaroo or equivalent , Steel Jack Coupling , Stick Broom Crystal or equivalent , Sugar Brown Sachets Mavana or equivalent 200 pkt , Sugar White Sachets Mavana or equivalent 200 pkt , Sugar Free Sachets Sugar free Gold or equivalent 100 pkt , Tankless Water Heater , Tape Brown and Trans 1 , Tape Brown and Trans 2 , Tea Bag Brook Bond loose Leaves or equi 100 Pch , Teflon Tape PTFE Tape , Telescopic Cotton Mop with Looped Threads , Thermos 300 ml , Thermos 750 ml , Thermos Flask Vacuum Insulated 1.5 Ltr , Tile Scrubber Tile Cleaning Cello or equivalent , Toilet brush with handle Plastic Local made , Toilet chok up pump , Toilet Roll 2 Ply Cleen or Equivalnet Pack of 8 Rolls , Toilet Roll Gplus or Equivalnet , Toilet Roll Holder with Flap , Toner 152 A Original Black New , Toner 36 A HP Original , Toner 88 A HP Original , Toner MLT D116L XIP Samsung Original , Toner NGP 88 1 MultiColour Set of 4 No.s , Toner Refill 116 , Toothpaste Colgate Visible white 50 gm Gluten free , Towel Rack , T Shirts , TT balls , Tumbler Holder , Urinal Sensor Art with Integrated Sensor , Urinal Screen Mat , Wall Hung Wash Basin , Wallmixer , Water Closet 110 , Water Closet 220 , Water Glass Glass Set of 6 350 ml , Water Jug and Glass set Glass , Water Jug Steel Size 5.2 x 9.8 cm approx 2 ltr S S , Waterproof Self Adhesive Floor Marking Tape , West Coupling , White Board Marker Cam Luxor Min 10 No one colour , Whitener Pen Cam Luxor Min 10 No one colour , Yoga Mat Total Quantity :

BRR:9707021 Bids Are Invited For Interactive Panels With Cpu (Q2) Total Quantity : 1

BRR:9706846 Bids Are Invited For Multimedia Projector (Mmp) (Q2) , Computer Kiosk (Q3) Total Quantity : 2

BRR:9706820 Bids Are Invited For Supply, installation, commissioning, training & prove out of Automatic Fire Detection & Informer system and Suppression system at the following locations of HAL Engine Division, BangaloreLocation-1: Stores-E29, E34, E48, E55. Location-2: Stores- E30, E64.Location-3: Stores-E40, E43Location-4: DR Room (IT server Room), Adour MK 871 Final assembly. (Automatic Detection & FireSuppression System) Total Quantity : A Location-1: Stores-E29, E34, E48, E55 Engine Division, HAL, Bangalore SL. No. Description 1 Supply of 4 Zone Conventional panel with Battery Backup 2 Supply of Conventional Multi sensor (Smoke + Heat) Detectors 3 Supply of Conventional Manual Call Point 4 Supply of Conventional Hooter Cum Flasher 5 Supply of 2 x 1.5 sq.mm Armoured Copper Cable FRLS Red Colour as per IS Standards. 6 Supply of 25mm dia Casing and Capping. 7 Installation and Commissioning 8 Any other itmes required for completing the job may also be quoted. (The quantity and purposemay be indicated clearly.) B Location-2: Stores- E30, E64 Engine Division, HAL, Bangalore 1 Supply of 4 Zone Conventional panel with Battery Backup 2 Supply of Conventional Multi sensor (Smoke + Heat) Detectors 3 Supply of Conventional Manual Call Point Technical Specification for Installation of Automatic Fire Detection & Informer System SN Description 4 Supply of Conventional Hooter Cum Flasher 5 Supply of 2 x 1.5 sq.mm Armoured Copper Cable FRLS Red Colour as per IS Standards, 6 Supply of 25mm dia Casing and Capping. 7 Installation and Commissioning 8 Any other items required for completing the job may also be quoted. (The quantity and purposemay be indicated clearly.) C Location-3: E40, E43 Engine Division, HAL, Bangalore 1 Supply of 4 Zone Conventional panel with Battery Backup 2 Supply of Conventional Multi sensor (Smoke + Heat) Detectors 3 Supply of beam type Smoke Detectors 4 Supply of Conventional Manual Call Point 5 Supply of Conventional Hooter Cum Flasher 6 Supply of 2 x 1.5 sq.mm Armoured Copper Cable FRLS Red Colour as per IS 7 Supply of 25mm Dia casing & capping. 8 Installation and Commissioning Charges 9 Any other items required for completing the job may also be quoted. (The quantity and purposemay be indicated clearly.) Technical Specification of Clean agent Fire Suppression system for “DR Room” of Engine Division D Location-4: DR Room (IT server Room), Adour MK 871 final assembly, Engine Division, HAL, Bangalore 1 Supply of 80 Litters water capacity seamless cylinder with Valve for filling clean Agent Gas with CCOE/PESO approval 2 Clean Agent Gas 1,1,1,2,2,4,5,5,5-Nonafluoro-4-(trifluoromethyl)3-pentanone. 3 Master Cylinder Accessories: Electric Control Head, 24 V DCDischarge Hose, 2 x 31 4 Discharge Nozzles 5 Schedule 80 Seamless Pipe & manifold with necessary fitting, supports etc., 6 Cylinder Low Gas alert Monitoring System Electronic Display Type with Load Cell and ON & OFF Switchfacility each unit. (Bottom Flat type unit. 7 Control panel LCD Touch Screen for Low Gas alert Monitoring System. 8 12 Volts DC SMPS Power Supply 5 Amps and Board Designed especially for cylinder monitoring system. 9 Supply & installation of 2 Zone conventional Microprocessor based Fire Alarm Control panel with Auto gasrelease module and Battery Backup. 10 Conventional type Multi-sensor Smoke Detectors 11 Electronic Hooters cum flasher 12 2 x 1.5 sqmm. Armoured Copper Cable 13 Gas Abort Switch 14 Manual Gas Release Switch. 15 Auto Dialer System with minimum 05 Telephone numbers connectivity. (Provision of P&T Dedicatedtelephone line will be under HAL scope.) 16 MS Stand for mounting clean agent cylinder and accessories for Low gas Alert Monitoring System WithMS Mesh covering for all sides 17 Warning Board 18 Installation, testing & commissioning 19 Any other items required for completing the job may also be quoted. (The quantity and purposemay be indicated clearly.)

BRR:9706794 Bids Are Invited For Client Pc , Server Pc , Interactive Flat Panel 65 Inch With Built In Pc , Lan Cabling And Network Switches , 5Kva Ups Online , Battery , Electric Wiring 2 Per Sheet , Air Conditions 2 Tons , Student Workstation , Revolving Chair , Podium , English Languages Lab Software Specifications For 41 Terminals Total Quantity : 268

BRR:9706731 Bids Are Invited For Interactive Panels With Cpu (Q2) , Video Conferencing Camera / Web Camera (V2) (Q2) , Electronic Lectern (Q2) Total Quantity : 8

BRR:9706679 Bids Are Invited For Digital Display Kilovolt Meter, 4-20Ma, 100-260V, 100Mm , Digital Display Frequency Meter Slave Clock, 100-260V, 100Mm Total Quantity : 7

BRR:9706650 Bids Are Invited For 60W Logo Projector Light IP67 Waterproof OSRAM LED Indoor Outdoor Branding Static & Rotating GOBO Projection Custom Logo Display 6600 Lumens, Iron material with powder coded LED light source. SMART COOLING SAFETY-Advanced fan-cooled copper tube design with lightning and over-voltage protection ensures reliable, long-lasting performance. ALL WEATHER IP 67 DURABILITY - Built tough with waterproof and dustproof housing to keep your branding shining rain or shine. BRILLIANT 6600 LUMENS OUTPUT - Illuminate your brand with unmatched clarity and brightness, perfect for large venues and outdoor spaces. DYNAMIC STATIC ROTATING LOGOS - Switch effortlessly between static and rotating projections to captivate every passerby. VERSATILE INDOOR OUTDOOR MOUNTING-Flexible installation from 4 to 17 feet high, ideal for retail, events, exhibitions, and building facades. 50° Professional display rated for 16/7 operation with essential professional functions. Ideal for digital signage and corporate applications, the slim, easy-to-use. Very high 4K picture quality with 350 nit screen brightness is complemented by simple setup, content sharing and networked control-ideal for todays connected AV environments. 4K X-Reality PRO upscales pictures closer to true 4K quality. Images are sharpened and refined in real time, revealing extra detail from lower-resolution content. Live Color technology brings images alive with a brilliant palette of vibrant, natural colors. Motion flow XR ensures smoother, more natural reproduction of rapidly-moving on-screen images. Signal connections, networking and other interfaces are conveniently side mounted for easy installation and access when the display is in portrait position. With growing demand for ever larger display screens, there is also the risk of greater resource and energy use. However, Sonys sustainability commitments arerealizing efficiency gains from product development right through to customers viewing screens. Screen Size: 50° Brightness (cd/ft²): 350 Contrast Ratio: 5000:1 Dynamic Contrast Ratio: 400,000:1 Response Time (Gray to gray, Typical, ms): 6 Display Resolution (H x V, pixels): 3840 x 2160 HDR (High Dynamic Range) Compatibility: Yes (HDR10, HLG) Aspect Ratio: 16:9 Portrait Tilt Compatibility: Yes Dimming Type: Frame Dimming Display Device: LCD Panel Type: VA Backlight Type: Direct LED Color Gamut (DCI-P3): 75%... more in document Total Quantity : 155

BRR:9706571 Bids Are Invited For Entry And Mid Level Desktop Computer (Q2) , Computer Printer (V2) (Q2) , Multimedia Projector (Mmp) (Q2) , Projector Screen (V2) (Q3) Total Quantity : 11

BRR:9706531 Bids Are Invited For Interactive Panels With Cpu (Q2) Total Quantity : 68

BRR:9706494 Bids Are invited for Interactive Multipurpose Display System - 86 Inch Interactive Panels With Ops , Smart System , 4K 20X Optical Zoom Camera - 4K 20X Optical Zoom Camera With Mounting Brackets-1Set , Wireless Discusion Units And Chairman Unit - Wireless Discussion Units With Conference Controller And Chairman Unit , Delegate Unit For The Conference System , Audio Digital Signal Processor , Wirelss Access Point For Conference Microphone System - Wireless Conference Microphone System , 6 Inch Two-Way Ceiling Speaker - 6Inch Two-Way Ceiling Speaker, 70/100V Transformer With 8Omega,Bypass, 110 Deg, Conical Coverage, Includes C-Ring And Rails For Blind Mount Installation - 3 Sets , Room Controll 8 Button Pad Works Standalone , Access Point , Battery Charging Unit - Microphone Charging Unit 8 Capacity , Accessories , Installation Charges Total Quantity : 27

BRR:9706414 Bids Are Invited For Health Kiosk (Q2) Total Quantity : 1

BRR:9706304 Bids Are invited for Digital Concrete Test Hammer - Nominal Kinetic Energy 2.207J Led Display Type Test Range 10 - 60Mpa , Digital Clamp Meter - 1000A 750V , Tds Conductivity Meter - Measurement Range 0-1999 , Chlorine Meter - Display Lcd Range 0-5Ppm , Safety Belt - Safety Belts Full Body Fall Protection Double Hook Shock Absorber , Laser Distance Meter - Measurement Range 40Mtr Display Lcd Total Quantity : 9

BRR:9706063 Bids Are Invited For Interactive Panels With Cpu (Q2) Total Quantity : 4

BRR:9706021 Bids Are Invited For T Type Led Box Board , Led Box Type Board , Acp Sheet And Radium Letter , Vinyl Print For Lamp Post , Acp Sheet And Uv Print , Brass Plate , Led Box Letter , Led Name Plate Board , Alphabet Letter , Clip On Led Lights Photo , Acp Led Box Board , Digital Led Display Board Total Quantity : 238

BRR:9705999 Bids Are Invited For Interactive Panels With Cpu (Q2) , Multifunction Printer (Print, Scan, Copy) (Q2) Total Quantity : 47

BRR:9705952 Bids Are invited for Loudspeaker Twelve Inch - Twelve Inch Two Way Loudspeaker With Hundred By Sixty Degree Horn Foh Left Or Right , Loudspeaker Fifteen Inch - Fifteen Inch Three Way High Power Loudspeaker With Ninety By Fifty Degree Horn Foh Centre , Sub Woofer - Dual Eighteen Inch Subwoofer , Surround Sound Speaker , Digital Processor - Digital Professional Sorround Audio Processor , Amplifier - Four Ch Power Amplifier Four By Seven Hundred Fifty Watt , Amplifier - Two Ch Power Amplifier Two By Thousand Watt , Fixed Brackets - Fixed Brackets For Surround Speakers , Cables - Cables For Speaker Wiring With Complete Installation , Audio Cables And Connectors - Audio Cables And Connectors Kit For Audio Rack Internal Wiring , Equipment Rack - Equipment Rack Nineteen U , Hdmi Extender - Hdmi Extender Seventy Meter , Screen - Fixed Perforated Screen With Frame Twenty Eight By Fifteen Feet , Ten Kva Online Ups - Ten Kva Online Ups With Power Bank Twelve Volt Twenty Five Ahc Fifteen Nos Battery Total Quantity : 38

BRR:9705836 Bids Are invited for Pencil Hb - Pencil Hb Dark Platinum , Eraser - Eraser Non Dust Jumbo , Stapler - Stapler No 24 By 6 Model No Hd 45 Of Make Kangaroo , Stapler Pin - Stapler Pin 24 By 6 Model No Hd 45 Of Make Kangaroo , Stapler - Stapler No 10 Small , Stapler Pin - Stapler Pin For No 10 Of Make Kangaroo , Sticky Note Pad - Sticky Note Pad Size 15Mm X 75Mm X 250 Sheets Four Colour , Pilot Pen - Pilot Pen Model V5 Or V7 , Uniball Pen , Pen Pin Point , Sketch Pen , High Lighter Set , U Clip - U Clip 28 Mm Plastic Coated , Paper Cutter Large , Register Rulled 2 Qrs 220 Pages , Register Ruled - Register Rulled 4 Qrs 360 Pages , Register Ruled - Register Rulled 6 Qrs 424 Pages , Plastic Scale Small , Correcting Fluid Pen , Glue Stick 15 Gm , Gum Bottle - Gum Bottle 300 Ml , Binder Clip Metallic - Binder Clip Metallic Size Half Inch , Paper Pin Assorted , Stamp Pad , Scissor Medium , White Board Marker , Parmanent Marker - Parmanent Marker Blue Or Black , Cd Marker Pen , Paper Weight , Clip Board , Punching Machine - Punching Machine Double Punch , Single Punch Machine , Steel Tape , Cello Tape 2 Inch , Red Pen , Calculator , Tags Small , Note Pads , Broom Stick , Coconut Broom , Wiper , Floor Cleaning Mop , Sanitizer , Liquid Hand Wash - Dettol Liquid Hand Wash , Floor Cleaner - Floor Cleaning Solution Make Lizol , Harpic - Harpic Big Bottle , Toilet Brush - Toilet Cleaning Brush , Cleaning Brush - Wash Hand Basin Cleaning Brush , Naphthalene Balls , Odonil , Computer Cleaning Cloth , Table Cleaning Cloth , Vim Bar Soap , Colin Bottle Large , Tissue Papers , Knife , Phenoil , Bucket Big Size , Mug , Bucket Small Size , Room Freshner Total Quantity : 406

BRR:9705817 Bids Are invited for Video Confrence Camera Stand , Speaker People Link , Drawing Sheet , White Board Marker , Developer M438 Total Quantity : 13

BRR:9705815 Bids Are invited for Paper A4 75 Gsm , Paper Fs 75 Gsm , Cartridge 12A , Paper Pin , U Clip , Reynold Pen Blue , Reynold Pen Red , Reynold Pen Blue , Pen Use And Throw Blue , Natraj Pencil , Duty Note Book , Reynold Refill , Sketch Pen Black , Stapler Small No 10 , Stapler Pin No 10 , Stapler Pin 24 6 , Tape Brown 2 Inch , File Cover Coloured Plain , White File Cover Plain , Correction Pen , Photo Paper Desmat 5760 Dpi , Cd , Dvd , Colour Flag , Sticky Notes 3 Inch X 5 Inch , Sticky Notes 3 Inch X 3 Inch , Sticky Notes 2 X 3 , Envelope A4 12X10 Cloth Type , Envelope Legal 12X16 Cloth Type , Envelope Brown Small 4X6 , Envelope Brown Medium 4X9 , Envelope Brown Large 5X11 , Glue Stick , Highlighter Yellow , Clip Board White Total Quantity : 2207

BRR:9705792 Bids Are invited for 98 Inch Interactive Panel , 85 Inch Interactive Panel , Micro Pc , Digital Podium , Online Ups 2Kva 30 Min Backup , Ptz Vc Camera , Cables And Accessories Total Quantity : 42

BRR:9705763 Bids Are Invited For Repair And Overhauling Service - Sofas & Couches; Wooden Notice Board; Yes; Buyer Premises

BRR:9705762 Bids Are Invited For Kiosk Touch Screen With Floor Stand, Preloaded Os (Android) Total Quantity : 1

BRR:9705650 Bids Are Invited For Ptc For Library Footfall Kiosk Total Quantity : 1

BRR:9705576 Bids Are Invited For Projector Mounting Stand (V2) (Q4) , Projector Screen (V2) (Q3) , Multimedia Projector (Mmp) (Q2) Total Quantity : 18

BRR:9705544 Bids Are invited for Flex Board 6X4 , Flex Board 15X5 With Frame , White Board 4X3 , Acrylic Board 5Ft By 10 Inch , Acrylic Insignia With Light 3X3 Feet Eagle Logo , Pointer Total Quantity : 18

BRR:9705452 Supply, Erection, And Commissioning Of P2.5 Led Display Screen In Mangala Council Hall Of Mangaluru City Corporation Central Office Building Lalbagh

BRR:9705420 Bids Are invited for Projector Screen 10X8 , Hdmi Switcher 8X8 , Hdmi Spliter 8X8 , Usb 3.0 Extention Cable 20Mtr , Hdmi Cable 2.0 20 Mtr , Speaker Cum Microphone , Usb 3.0 Cable , 3.5Mm To 6.32 Mm Monojack Cable , Hdmi Cable 20 Mtr , Desktop Pc , Vc Camera With Speaker , Projector Screen 10X8 , Amplifier 1000Wat , Xlr Cable 20Mtr , Xlr Cable 1Mtr , Mixer 24 Chanel Phantom Power , Goosneck Mic With Total Quantity : 61

BRR:9705413 Bids Are Invited For Floor Mount Touch Kiosk Display Total Quantity : 1

BRR:9705369 Bids Are Invited For Supply Of Folding Walker , Height Measuring Scale- Stadiometer , Nabulizer Machine , Double Step Stool , Announcement Mic And Sound System , Computer Aio System With Printer And Ups Inbuilt , Office Table For Computer System , Supply Of Geyser , Smart Led Based 32 Inch Tv , Double Door Refrigirator Capacity Of 190Ltr. , Room Cooler , Shoe Rack , Slipper , Supply Of Staff Locker , 20 Lph Capacity Water Cooler , White Board Marker , White Board/Notice Board , Examination Light , Measuring Glasses , Percussion Hammer , Turning Fork , Wall Mounted Height Measuring Scale Total Quantity : 154

BRR:9704862 Bids Are invited for Ssd 1 Tb Nvme For Server With Installation , Ddr4 Ram 16Gb 3200Mhz For Server With Installation , Ssd 256 Gb With Installation , Cmos Battery , Usb Wired Mouse , Usb Wiredvkeyboard , Led Monitor 18.5 Inch , Wifi Router 4 Pin 4 Antina , Ups 650Va , Motherboard H81 , 4K Hdmi 10M Cable Total Quantity : 83

BRR:9704778 Bids Are invited for Fluke Digital Multimeter Voltmeter 6000 Counts Ac Dc , Projector Ceiling Mount , Soldering Station With Lcd Digital Display , A4 Paper , Pencil Total Quantity : 7

BRR:9704776 Bids Are invited for Presentation Panel For Training , Cordless Phone , Allen Key , White Board Stand , Lithium Battery 3 Volt Total Quantity : 12

BRR:9704765 Bids Are invited for Pvc Talc Sheet Roll 54 Inch , Stapler Hd 45 - Stapler Hd-45 , Staper Hp 10 - Staper Hp-10 , Fevicol Mr , Magnetic Duster , Binder Clip Black 32Mm , Stapler Pin 10 1M - Stapler Pin 10-1M , Stapler Pin 24 6 1M - Stapler Pin 24/6-1M , Steel Scale , Envelope Legal Size , Envelope 9 Pt 5 By 4 Pt 5 - Envelope 9.5X4.5 , Transparent Tape 1 Inch 65 Meter , White Board Marker Black , White Board Marker Blue , White Board Marker Red , Photo Glossy Paper , Karbon Paper , Epson Ink Set 664 B Y C M - Epson Ink Set 664 (B,Y,C,M) , Bond Paper 120 Gsm Total Quantity : 621

BRR:9704715 Purchase & Installation Of Vms Boards To Sp Office Mangalore - Supply And Installation Of 2 Kva Online Ups Along With Battery Units Meeting Required As Per Specifications.,Supply And Install A Robust Steel Structure Tailored For The Installation Of Variable Message Signs (Vms). As Per Specifications.,The Erection Charges As Per Specifications.,Afp Sheeting As Per Specifications.,Mescom Power Supply And Necessary Items (Deposit +Meter +Meter Box+ Fuse+ Mcb+ Hdpe Pipe + 2 Core Armed Cable30mtr+Digging+Exavaction+Road Cutting Charges),Providing & Fixing Of Variable Message Sign Of Size 2Mxlm (1920 Mm X 960 Mm Cabinets) On With 8Mm Pitch Full Colour Led Display Of Smd Type Completely Automated Carrying A Performance Warranty And Maintenance Of 3 Year.,Chemical Earthing, Lightening Arrestor And Required Surge Protection Parameters To Protect The Components.

BRR:9704584 Supply Of Led Panel Light, 3W Round Recessedled Panel Light, 3W Round Recessed,Led Panel Light, 3W Round Recessed Type With Blue Led Light, Suitable For False Ceiling Mounti Ng, Operating On 220-240V Ac, 50 Hz, Similar To Make -Proline S Regular Panel Series Or Equivalent. [ Wa Rranty Period: 30 Months After The Date Of Delivery ] ]

BRR:9704475 Supply Of Digital Voltmeter With Led Displaydigital Voltmeter With Led Display,Digital Voltmeter With Led Display Size 96 Mm X 96 Mm, Multiline For Measuring Ry, Yb & Br. Input Voltage 800 V L-L, With Auxiliary 24 / 110 V Dc, 4 Va, Class:1.0 As Per Sr. No:-14 Of Bill Of Material Of Rdso Spec:- Rdso/Pe/Spec/Ac/0200-2020 (Rev-0) Or Latest. Accepeetd Make:- L&T/ Ae/Socomec/Rish Abh/ Siemens/ Schneider/Yokins Only. [ Warranty Period: 30 Months After The Date Of Delivery ] ] , Digital Ammeter With Led Display Size 96 Mm X 96 Mm, Multiline For Measuring Input Current R, Y & B, 0-600 A, Ct - 1 A / 5 A, Programmable, With Auxiliary Supply 24 / 110 V Dc, 4 Va, Class - 1.0. As P Er Sr.No:-09 Of Bill Of Material Of Rdso Spec:- Rdso/Pe/Spec/Ac/0200-2020 (Rev-0) Or Latest. Accepeet D Make:- L&T/ Ae/Socomec/Rishabh/ Siemens/ Schneider/Yokins Only [ Warranty Period: 30 Months After The Date Of Delivery ] ]

BRR:9704241 Supply Of Hand Held Digital Displayhand Held Digital Display,Hand Held Digital Display Insulation Tester With Peak Testing Voltage 1000V,Wit H Testing Voltages 50/100/250/500/1000V, Dual Sourced (Battery And Adaptor), With Back Lit L Cd Display, With Voltages, Resistance And Continuity Checking Options,With Storage Option, Confirming To Iec 61010-1 600V Cat Iii Or Latest (Detailed Specification Available In Annexure-I ) Make: Rishabh, Motwane, Megger, Or Equivalent [ Warranty Period: 30 Months After The Date Of D Elivery ] ]

BRR:9704194 Supply Of Sets Of Different Types Of Gauges As Per Specifications And Drawingssets Of Different Types Of Gauges As Per Specifications And Drawings,Piston Stroke Gauge: Supply Of Piston Stroke Gauge As Per The Specifications. . Note: Calibration Certificate Required From Nabl/Govt. Approved Agencies. Accepted Make: Ganapathy, Pie Or Sim Ilar. [ Warranty Period: 12 Months After The Date Of Delivery ] ] , Cbc Height Gauge: Digital Cbc Height Gauge Accuracy Of Gauge -(+-) 0.2Mm, Measuring Ran Ge:900 To 1140 Mm. Calibration Certificate From Nabl Accredited Lab To Be Provided Along With Supply. [ W Arranty Period: 30 Months After The Date Of Delivery ] ] , Adapter Gauges For Casnub 22 Nl, 22 Nlb & 22 Hs Bogies And Narrow Jaw (6 1/2 X 9) Adap Ter (Lwlh 25 Bogie) As Per Attached Annexure. . Calibration Certificate To Be Provided Along With Supply. Fi Rms Offer Make/Brand: Prasad, Ganapathy Or Similar [ Warranty Period: 30 Months After The Date Of Deliv Ery ] ] , Cbc Buffer Projection Gauge . Range: 570Mm -665Mm. Accuracy: +/-1 Mm. Supplied In Eleg Antly Finished Well-Padded Wooden Storing And Transportation Box With Working Manual And Calibration Certi Ficate From Nabl Accredited Lab. [ Warranty Period: 30 Months After The Date Of Delivery ] ] , Cbc Gauges: Set Of E Type Cbc Gauges Consists 26 Nos As Per Rdso Manual G-80-Annexur E Enclosed. Calibration Certificate From Nabl Accredited Laboratory Minimum One Year Validity. Make/Brand : Prasad, Ganapathy Or Similar [ Warranty Period: 30 Months After The Date Of Delivery ] ] , Digital Wheel Diameter Gauge (Portable & Foldable Type) For Bg As Per Attached Technical S Pecification For Measuring Outer Diameter Of Wheel Sets Of Wagons. Calibration Certificate To Be Provided Al Ong With Supply. [ Warranty Period: 30 Months After The Date Of Delivery ] ] , Wheel Diameter Gauge: With Lcd Display (Range-800Mm-1100Mm). Calibration Certificate To Be Provided Along With Supply. Other Details As Per Enclosed Specification. [ Warranty Period: 30 Months After The Date Of Delivery ] ] , Gauges For Measurement Of A Dimension Of Slack Adjuster For Air Brake Fitted With Bg Wagons, Material : Stainless Steel Aisi-304. Drg No-Wd-Xi-1136. Supply With Calibratio N Certificate And Protective Case. [ Warranty Period: 12 Months After The Date Of Delivery ] ] , Cbc Gauges: One Set As Per Attached Annexure And Drawing. Make: Pie/ Ganapathy Or Simil Ar. Calibration Certificate To Be Provided Along With Supply. [ Warranty Period: 30 Months After The Date O F Delivery ] ] , Magnetic Dial Indicator Gauge Along With Universal Dial Indicator Holder And Magnetic Base Di Al Stand. Calibration Certificate From Nabl/Govt Approved Lab To Be Provided Along With Supply. Other Detail S As Per Attached Specification. Make:- Insize, Mitutoyo, Baker. Or Similar. Quote With Superior Specification Will Also Be Considered [ Warranty Period: 12 Months After The Date Of Delivery ] ] , Digital Wheel Distance Measuring Gauge Along With Calibration Certificate; (I) Range:1580-1 605 Mm, (Ii) Display: Dual Display System( Combination Of Digital Display & Mechanical), (Iii) Least Count: Digital Display Of Micrometer Least Count 0.001 Mm & Mechanical Least Count 0.01 Mm To Be Supplied In S Toring Box With Carrying Handle. [ Warranty Period: 30 Months After The Date Of Delivery ] ] , Wheel Profile Gauge For Checking The Wheel Profile Of Bg Wagon Along With Calibration Certificate, Made Up Of Hard Steel, Profile Made From Wire Cut Edm, Flange Sizes (In Mm) 20,21, 22,23, 24,25 , 26,27,28Mm As Per Rdso Drawing No. Wd-89060/S-2 Alt. 5 Or Latest, And Flange Size 29.4Mm As Per Rds O Drawing No. Wd-88021 Alt. 4 Or Latest. Accepted Brand : Ganapathy/Pie/Prasad Or Similar [ Warranty Pe Riod: 30 Months After The Date Of Delivery ] ]

BRR:9704163 Supply Of Projector With 8X8 Screen-----Projector With 8X8 Screen-----,Projector With 8X8 Screen. Detail As Per Annexure Attached [ Warranty Period: 12 Months After The Date Of Delivery ] ] => Limited

BRR:9704155 Supply Of Supply, Installation ,Commissioning And Testing Of Set Of Kiosk Along With Thin Client ----------Etcsupply, Installation ,Commissioning And Testing Of Set Of Kiosk Along With Thin Client ----------Etc,Supply, Installation ,Commissioning And Testing Of Set Of Kiosk Along With Thin Client In Built Biometric And Breath Analyzer Device Of Latest Version. Material Of Kiosk: Ms Or Stainless Steel, Make For Bi Ometric Device: Nitgen Technologies, Secugen Technologies Or Other Oem, Make For Breath Analyzer Device : Itself Confirm To Rdso Specification No.- Rdso/2015/El/Spec/0119(Rev?2?) Dt- 15/03/20 18 For Ba Device With Fuel Cell Sensor Based Breath Alcohol Analyzer. Test Certificates From Nabl/Ilac As Per Rdso Spec [ Warranty Period: 30 Months After The Date Of Delivery ] ] => Limited

BRR:9704086 Supply Of Wheel Diameter Measuring Gaugewheel Diameter Measuring Gauge,Wheel Diameter Measuring Gauge For Memu Rake Wheel Diameter Measurement Of Mode L Equivalent To Pie Wd2(E) With Led Display For Measurement Of Wheel Diameter Done In Both Mounted & U Nmounted Wheels With 3 Point Measuring Technique With Measuring Range Of 600Mm To 1200Mm For Bg Wh Eel Sets.As Per Drawing Attachment. Make: Pie/Riftek Or Similar [ Warranty Period: 30 Months After The Date Of Delivery ] ]

BRR:9703845 Bids Are Invited For Supply, Installation And Commissioning Of Smart Interactive Display Panel With Touch Facility 65 At , Interactive Panels With Cpu Total Quantity : 9

BRR:9703564 Bids Are invited for Table - Table With Sunmica Top Of Size 18Inch X 16Inch X 12Inch , Printer - Epson Printer Model No L3250 , Flex - Training Flex Printing , Projector Screen - Projector Screen 8Feet X 4Feet , Projector Screen 6Feet X 4Feet , Stabilizer - 1Kva Stabilizer Total Quantity : 44

BRR:9703558 Bids Are invited for Work 1 - 10W Reading Lamp, White , Work 2 - Dimmable Desk Lamp, Touch , Work 3 - 43In Led Smart Tv, Generic , Work 4 - Ro+Uv+Uf 7L Water Purifier , Work 5 - 2.5Kva Inv, Li-Po4 Battery , Work 6 - Main Lt Panel, Ip-66 Digtl , Work 7 - Lighting Panel, Analog Tmr , Work 8 - Control Pnl, Mccb 3P 100A , Work 9 - 4C Alum Armrd Cable 95Mm , Work 10 - 4C Alum Armrd Cable 35Mm , Work 11 - 2C Alum Armrd Cable 6Mm , Work 12 - 2C Copr Indstrl Cable 1.5 , Work 13 - Elec Accs Teelugspipes , Work 14 - Ese Lightng Mast 5M 107M , Work 15 - Earthing Rod, Copr Plated , Work 16 - Gi Pole 6M, 50W St Light , Work 17 - Bollard Light 3Ft, 7W Led , Work 18 - High Mast 9M, 4X100w Led , Work 19 - Genset 62.5 Kva Total Quantity : 4079

BRR:9703250 Bids Are Invited For Interactive Panels With Cpu (Q2) Total Quantity : 1

BRR:9703219 Bids Are Invited For C Ruled Register 1Quire - Fs Size Approx 8 Inch X 13 Inch Paper Quality 60 To 70 Gsm Of Jagruti Brand , C Ruled Register 2Quire - Fs Size Approx 8 Inch X 13 Inch Paper Quality60 To 70 Gsm Of Jagruti Brand , C Ruled Register 3Quire - Fs Size Approx 8 Inch X 13 Inch Paper Quality60 To 70 Gsm Of Jagruti Brand , C Ruled Register 4Quire - Fs Size Approx 8 Inch X 13 Inch Paper Quality 60 To 70 Gsm Of Jagruti Brand , C Ruled Register 5Quire - Fs Size Approx 8 Inch X 13 Inch Paper Quality 60 To 70 Gsm Of Jagruti Brand , C Ruled Register 6Quire - Fs Size Approx 8 Inch X 13 Inch Paper Quality 60 To 70 Gsm Of Jagruti Brand , C Ruled Register 8Quire - Fs Size Approx 8 Inch X 13 Inch Paper Quality 60 To 70 Gsm Of Jagruti Brand , Stapler Machine No 10 - Machine No 10 Of Kangaro Brand , Stapler Pin No 10 M - Pkt Of 1000 Staples Of Kangaro Brand , Stapler Medium Size - 24/6 Of Kangaro Brand , Stapler Pin Medium Size - 24/6 Pkt Of 1000 Staples Of Kangaro Brand , Stapler Machine Heavy Duty - Model Hd 23S17 Of Kangaro Brand , Stapler Pin For Heavy Duty Stapler - 23517 Hd 17 Mm 5 By 8 Inch Pkt Of 1000 Staples Of Kangaro Brand , Punch Machine Single Hole - Punch Fp 20 Of Kangaro Brand , Punching Machine No 280 - Machine No 280 Of Kangaro Brand , Punching Machine Nodp 600 - Machine No Dp 600 Of Kangaro Brand , Punching Machine Heavy Duty Dp 800 - Machine Heavy Duty Dp 800 Of Kangaro Brand , Pencil - Extra Dark Of Doms Or Apsara Or Platinum Or Faber Castle Brand , Pencil Eraser - Non Dust Plasto Of Apsara, Faber Castle Or Doms Brand , Pencil Sharpener Med - Plastic Body With Metal Blade Of Doms Or Faber Castle Or Apsara Brand , Gum Bottle - Paste Net Content 150Ml Of Camlin Brand , Glue Stick - Non Toxic 25 Gms Of Fevistick Brand , Rubber Band - Box Of Assorted Size Net Weight 37 And Half Gms Of Lera Or Vandan Brand , Note Sheet Paper Green. - Ledger Paper Size Fs 210Mm X 345Mm 80 Gsm Ream Of 480 Sheets Of Jk Ledger Or Andhra Brand , Scissor - Medium Size 7Inch To 8Inch Of Gorilla Or Kangaro Brand , Correction Fluid - Bottle Of 15 Ml Of Kores Brand , Correction Pen - Pen Of 7Ml Of Camlin Or Kores Brand , Writing Pad 100 Pages - 1 By 8 Size With Top Cover Book Size 14 Cms X 22 Cms 50 Sheets Per Book Of Ajanta Or Sundaram Brand , Spiral Pad No 4 - No 4 Of 100 Pages Of Ajanta Brand , Conference Pad - 1 By 8 Size With Top Cover Book Size 14 X 21 And Half Cms 10 Sheets Per Book Of Sundaram Or Ajanta Brand , Brown Tape 3Inch - For Packing Wonder Tape 555 3Inch 50 Mtrs Brown Colour Net Wt 2 Point 65 Gms Of Wonder Brand , Cello Transparent Tape 1 Inch - 65 Mtr Roll Net Wt 86 Gms Of Wonder 555 Brand , Cello Transparent Tape 2Inch - 65 Mtr Roll Net Wt 171 Point 5 Gms Of Wonder 555 Brand , Pencil Cell Aa - Single Packing Of Everready Or Nippo Brand , Pencil Cell Aaa - Single Packing Of Everready Or Nippo Brand , Sketch Pen - Size Approx 14 Cms Of Red Green Black And Blue Only Of Luxor Brand , Pin Container - Top Magnetic Lid With Opening Of Omega Or Prime Brand , Paper Pin Pkts - Nickle Plated Packet Of 50 Gms Of Rolex Brand , U Clips - Plastic Colour Coated Steel 30Mm Packet Of 100 Nos Of Music 555 Brand , Binder Clip 15Mm - Packet Of 12 Nos Of Music Or Gorilla Brand , Binder Clip 32Mm - Packet Of 12 Nos Of Music Or Gorilla Brand , Binder Clip 41Mm - Packet Of 12 Nos Of Music Or Gorilla Brand , Dak Folder With Clip On One Side - Folder With Metal Timex Clip Of Size 345Mm X 255Mm X 35 Mm Of Good Quality , Box File Clip Type - File With Metal Press Button Clip 345Mm X 270 Mm X 80Mm Of Anita Or Sps Brand , Plastic Spring File A4 301 - A4 Size 301 Of Sps Brand , Plastic Spring File Fs 302 - Fs Size 302 Of Sps Brand , File Board With Wrapper - Cardboard 345 Mm X 255Mm Wth Wrapper And Cotton Rope Weighing 20 Gms Or More Of Good Quality , File Wrappers With Lace - Cloth Wrapper With Cotton Rope Of Good Quality , Stamp Pad Med Size - Size 70 Mm X 111Mm Of Camel Or Kores Brand , Stamp Pad Big Size - Size 95 X 159 Mm Of Camel Or Kores Brand , Ink Bottle - For Stamp Pad Voilet And Red Bottle Of 100 Ml Of Camlin Or Kores Brand , Waste Paper Metal Basket Without Lid - Size 10 And Half Inch Height And Diameter 9 Inch Of Good Quality , Plastic Paper Tray - Plastic Tray Without Jali 400 Mm X 280 Mm Of Ratan Brand , Plastic Office Tray Jali Type Double Decker - Double Decker Jali Type Tray Two Trays With Support Of Omega Or Omax Brand , Paper Cutter - Size 6 To7 Inch Length Of Gorilla Brand , Highlighters - Flourescent Colour With Water Based Ink Of Luxor Or Faber Castle Or Kores Brand , Calculator - Mj120 D 12 Digit Mj 120 D Bk 12 Digit Of Casio Brand , Permanent Marker Pen - Of Different Colours Ie Blue Black Red Of Fabercastle Or Camlin Or Luxor Brand , White Board Marker - Of Different Colours Ie Blue Black Red Of Fabercastle Or Camlin Or Luxor Brand , Ohp Marker Super Ohp Pens - Of Different Colours Ie Blue Black Red Fine Tip Upto 1 Mm Line Width Of Fabercastle Or Camlin Or Luxor Brand , Post It Pad 3 Inch X 3 Inch - 76 Mms X 76 Mms Pkt Of 100 Sheets Of Size 75Mm X 75Mm Of 3 M Brand , Post It Pad 3Inch X 1Inch X 3Inch - Flag Coloured Pkt Of 150 Sheets Of Size 25 Mms X 76 Mms Of 3 M Brand , Plastic A4 Report File - With Pocket Inside Model No 307 T Of Sps Brand , Plastic Fs Size Report File - With Pocket Inside Model No 308 T Of Sps Brand , D Ring Folder - Of High Quality A4 Size 403 Of Sps Brand , Four Flap File - With Thick Cloth Non Synthetic On 4 Sides Of Cardboard And Attached Cotton Rope Of Good Quality , Plastic Folder A4 Size L Type Transparent - L Type Transperent Folder One L Side Opened And Another L Side Closed A4 Sizeof Good Quality , Plastic Folder Fs Size L Type Transparent - L Type Transperent Folder One L Side Opened And Another L Side Closed Fs Sizeof Good Quality , Packing Cloth White - Fabric Cloth Material For Packing Of Good Quality , Drawing Pins - With Multi Coloured Plastic Head Pkts Pkt Of 50 Pieces Of Music 555 Brand , A4 Sticker Self-Adhesive - Multi Purpose Size 210 Mm X 297 Mm Thickness 157Plus Or Minus 5 Gsm Packet Of 100 Sheet Of Novajet Mpl Or Multi Brand , Paper Weight - Made Of Glass Of Good Quality , White Board Magnetic 2Ft X3 Ft - Magnetic 2Ft X3ft Of Milan Brand , White Board Magnetic 3 Ft X4 Ft - Magnetic 3Ft X4ft Of Milan Brand , Felt Display Board Notice Board Set 2Ft X3ft - Board Size 2 Ft X 3Ft Of Milan Brand , Felt Display Board Notice Board Set 3Ft X4 Ft - Board Size3 Ft X 4 Ft Of Milan Brand , Sponge Cup With Cover - Plastic Round Container Having Lid With Sponge Inside Of Good Quality , File Hole Guard Sheets. - 1 Sheet Of 168 Hole Guards Packet Of 3 Nos Of Printastick Brand , Sutli Roll - 75 Gms Of Good Quality , Nylon Roll - 500 Gms Of Good Quality , Pens Stand Prime - Prime Supreme Model No Jp 107 Of Prime Brand , Peon Book - 2 Quire Of Good Quality , Duster Magnetic - Magnetic White Board Duster Of Omax Brand , Plastic Punch Folder A4 Size - Transperent Folder With Single Opening On Top And Holes On Left Side For Filing Of Sps Brand , Plastic Punch Folder Fs Size - Transperent Folder With Single Opening On Top And Holes On Left Side For Filing Of Sps Brand , Wall Clock Quartz - 12Inch X 12Inch Square Or Round With Continous Free Movement Of Ajanta Brand , Led Rechargable Torch - Dl90 Unicorn 1 W Rechargeable Torch With Micro Usb Charger Of Eveready Brand , Acrylic Clip Board Exam Pad - Acryllic Transperent Board Exam Board With Metal Clip On Top Of Good Quality , Locks 7 Lever Navtal With 4 Keys - Brass Locks 7 Lever And Keys Of Good Quality , Scale 15 Cm Plastic - Plastic Body Of Camlin Brand , Scale 12Inch Plastic - Plastic Body Of Camlin Brand , Steel Scale 12Inch - Steel Body Of Ajanta Brand , Pencil Carbon Paper Fs Size - Kores Make Sapphire Box Of 100 Sheets With Latest Manufacturing Date Size 210Mm X 330Mm , Pencil Carbon Paper A3 Size - Kores Make Sapphire Box Of 100 Sheets With Latest Manufacturing Date Size 297Mm X 420Mm , Ball Pen - Blue Black Red Of Cello Gripper Brand , Ball Pen One Time Use - Lexi 5N , Pilot Pen Hi Tech - 0 Point 5 Mm Blue Black Red Green V5 Of Luxor Brand , Add Gel Pen Achiever - Add Gel Achiever , Paper Soft Pen - Paper Soft Ball Pen 0 Point7 Mm , Refills Blue Black Red - Refills For Ball Pen At Sr No 95 Above Cello Gripper , Refills Add Gel For Add Gel Pen Acheiver - Refills For Add Gel Pen Achiever Gr20 , Refills Paper Soft - Refills For Paper Soft 0 Point 7 Mm , A 4 Premium 4 Ring Box Files Blue - Plastic Folder Having 4 D Ring Holder Of 2Inchheight With Full Pvc Jacket And Full Transparent Window Pocket Outside And Half Transparent Window Pocket Inside , A 4 Premium 4 Ring Box Files Red - Plastic Folder Having 4 D Ring Holder Of 2Inchheight With Full Pvc Jacket And Full Transparent Window Pocket Outside And Half Transparent Window Pocket Inside , Lamination Pouches 11Cm X7 Cm 2 Point 75 Microns - Transparent Plastic Pouch Of 11Cm X 7Cm Double Sided Folded Of 2 Point75micron For Lamination , Paper Glasses - Paper Glass For Holding Water Of 5 To 6 Cm Base Diameter And Height 6 To7cms As Per Sample , Paper Straws 8Mm For Ba Test - 8 Mm Paper Straw19 Cm Long , Customized Thermal Paper Roll For Ba Test Print - Thermal Paper 48 Gsm Size 55 Mm X 4 Mtrs And Core 18 Mm , Removable Note Without Self Stick - Packet Containing 100 Pages Of 3 Inch X 3 Inch Size Of70 Gsm Paper , Plastic Separators - Plastic A4 Index Sheets With Number On Each Sheet From 1 To 31 Total Quantity : 81602

BRR:9703154 Bids Are Invited For Scissors (Q4) , Register (V2) (Q4) , Packaging Tape (Q4) , Clips, Paper As Per Is 5650 (Q4) , Markers For White Board (V2) (Q4) , Stamp Pads (Q4) , Notepads & Memo Books- Handicraft (Q3) Total Quantity : 197

BRR:9703121 Bids Are Invited For Supply, Installation And Commissioning Of Non- Interactive Display Panel With Non-Touch Facility 65 , Interactive Panels With Cpu Total Quantity : 10

BRR:9703095 Bids Are Invited For Simatic Op 177B, 6 Pn/Dp Stn. 256 Color Display Touch Key Mpi/P. No. 6Av6642-0Da01-1Ax1, Make: Siemens , Driver Display Unit Total Quantity : 1

BRR:9703070 Bids Are Invited For Interactive Panels With Cpu (Q2) Total Quantity : 23

BRR:9703015 Bids Are Invited For Interactive Panels With Cpu (Q2) Total Quantity : 81

BRR:9702796 Bids Are Invited For Interactive Panels With Cpu (Q2) Total Quantity : 1

BRR:9702795 Bids Are invited for Slatted Angled Racks With 4 Shelves , Executive Chair , Book Shelf Glass Cabinet , Small Book Stand , Computer Table , Computer Chair , Visitor Chair , Office Wooden Table , Desk Let Chairs For Laboratory And Exam Section With Writing Pad , Group Discussion Chairs , Group Discussion Table , Laboratory Revolving Stool , Steel Almiarh , Three Seater Bench , Three Seater Student Desk , Glass Almirah , White Board For Parctical Class Room , File Cabinet , Table For Laboratory Total Quantity : 463

BRR:9702556 Bids Are Invited For Computer Monitor (V2) (Q2) Total Quantity : 10

BRR:9702486 Bids Are Invited For Custom Bid For Services - R-1642A-Running & Maintenance Of Mining Kiosk At Nalco Mines, Damanjodi

BRR:9702291 Bids Are invited for Desktop Workstation , Ups , Server , Networking Toolkit , Networking , Smart Panel Pointer With Speakers , Smart Podium , I7 Laptop , White Board , Notice Board , I7 Pc , Laptop I9 , Printer , Office Curtain , 1 Executable Table Or Office Table , Revolving Chair , Ac Split , Furniture Equipment , Cctv System Kits , Office Almira , Wallpaper , Flooring Mat , Vacuum Cleaner , Mlflowdockerkubernetes , Power Bi Pro , Azure Ml Studio , Microsoft 365 Education , Adobe Photoshop , Tally , Visual Studio , Windows 11 Pro , Oracle Total Quantity : 72

BRR:9702276 Bids Are Invited For Procurement Of Projector Screen For Ntpc Nabinagar Total Quantity : 1

BRR:9702215 Bids Are Invited For Interactive Panels With Cpu , Video Conferencing Camera / Web Camera (V2) , Electronic Lectern Total Quantity : 4

BRR:9702159 Bids Are Invited For Interactive Panels With Cpu Total Quantity : 1

BRR:9702122 Bids Are invited for Paper A4 Size , Paper Legal Size , Pencil Hb , Correction Pen Whitener , U Pin Plastic , Pen Black Hauser , Pen Blue Hauser , Pen Red Hauser , Pen Blue Gel Uniball Impect , Pen Red Gel Uniball Impect , Refill Red Gel Uniball Impect , Refill Blue Gel Uniball Impect , Cello Tape Transparent 1.5 Inch , Cello Brown Transparent 1.5 Inch , Scale Steel , Pen Uniball Blue , Pen Uniball Red , Stick Pad 3X2 , Binder Clip 19Mm , Binder Clip 25Mm , Binder Clip 32Mm , Drawing Pin Plastic , Clip Board White , Fevi Stick , Pad Ink Blue , Highlighter Yellow , Five Colour Removed Stick Flag , Five Colour Removed Stick Flag Plastic , Cd Marker Pen Thin Type Black , Fevicol 500G , Stapler Small , Paper Pin , Binders , Stapler Large , Drawing Sheet White Brown , Calculator Big , Calculator Small , Calling Ball , Drafting Pad , Pencil Cell 10 X Each , White Board Marker Black , White Board Marker Blue , White Board Marker Red , White Board Marker Green , Chalk , V5 Pen Blue , V5 Pen Red , V7 Pen Blue , V7 Pen Red , Talc Sheet , Sketch Pen All Colour , Stapler Pin Small , Stapler Pin Large , Window Envelope , Dusting Cloth , Stamp Pad , Cutter Small , Dustbin Steel , Paper Weight 06 X Each , Pen Stand Total Quantity : 2972

BRR:9702082 Bids Are Invited For Interactive Panel With Cpu , Electronic Lectern , Invertor With Battery , Speaker , Amplifier , Microphone Collar With Complete Setup , Microphone Handheld , Web Camera , Job Work For Micelleneous Electric Wiring And Connection Total Quantity : 13

BRR:9702015 Bids Are Invited For Provision Of Outdoor Led Panel Total Quantity : 1

BRR:9701863 Bids Are Invited For Interactive Panels With Cpu , Electronic Lectern , Audio Amplifier (V3) , Video Conferencing Camera / Web Camera (V2) , Speaker (V3) Total Quantity : 9

BRR:9701848 Bids Are invited for White Board 6 X 4 Feet , Pin Up Board With Shutter 6 X 4 Maroon , Pin Up Board 4 X 3 Feet , Star Flex Board With Stand Size 6 X 8 Feet , Star Flex Board With Pasting 9 X 16 Feet , Digital Sticker , Speaker 5 Point 1 , Paper Cum Cd Shredder , Brown Coir Mat 6 X 6 Feet , Skipping Rope , Stop Watch Total Quantity : 253

BRR:9701745 Bids Are invited for Jbl Quantumn 100 Wired Over Ear Headphones Compatible With Mic , Book Organizer Stand At Least 6 Tier , Hanging File Magazine Holder , 5Ft Heavy Duty Folding Easel Stand For White Board , Display Boards Size 4X6 Feet With Glass Cover , Notice Board Or Pin Up Board Size 2X3 Feet , Bluetooth Speaker And Wireless Karaoke Mic 220 W Signature Sound , 6 Pcs Black Felt Bulletin Board , Calligraphy Pens And Brushed , Exhibition Display Boards Size 2X3 Feet Set With Stand , Portable Wooden Podium Lectern Total Quantity : 36

BRR:9701728 Bids Are Invited For Interactive Panels With Cpu , Electronic Lectern , Video Conferencing Camera / Web Camera (V2) , Inverter (V2) , Speaker (V3) , Audio Amplifier (V3) Total Quantity : 20

BRR:9701606 Bids Are invited for X Ray View Box - 14 Inchx 28 Inch Led Panels , Water Cooler - 40 Liter Capcity , Visitor Chair 3 Seats - Stainless Steel , Urine Pot Male - Standard Size , Urine Pot Female - Standard Size , Stop Watch - Digital , Staff Locker - 78X36x19 Inch 8 Door Staff Locker , Revolving Chair - Office Revolving Chair , Office Table - 5X 2.5 Feet Wooden , Office Dustbin - 14 Liter Capacity , Office Chair - Mid Back Mesh Chair Heavy Duty Metal Frame , Led Torch , Iron Racks - Iron Rack 6Ft X 3Ft X 1.5 Ft , Iron Almira - Iron 6Ft X 3Ft X 1.5 Ft , Digital Clock , Bmw Dustbin - 40 Liter Plastic Material Red Blue Yellow , Bed Pan Male - Standard Size , Bed Pan Female - Standard Size Total Quantity : 320

BRR:9701605 Bids Are Invited For Custom Bid For Services - Staff Quarters Repair & Maintenance; 1 SCHOOL BUILDING (A) CLASSROOM (i) CLASSROOM DESK LARGE SIZESupply & installation Big Desk (for two persons)-The overall dimensions of desk will be 1066mm x 930mm x Height 760mm, complete as per Specifications enclosed and direction of Engineer-in- charge having the Table top shall be made up of 18.0 mm thick plywood IS 303 of MR Grade OSL (one side shall be laminated, and other side shall have balancer finish). Table top dimensions shall be W 930 mm x D 380 mm. Edge towards bench shall be post formed with round edge. The remaining three edges must be sealed with 2mmthick PVC edge banding tape. Edge band must be trimmed on edges and corners. The desk shall be have low chemical emission of VOCs (Voltage Organic Compounds) and carcinogens, contributing to a healthier room environment. Seat and back rest shall be made of 18mm thick plywood of MR Grade OSL (one side shall be laminated, and other side shall have balancer finish) except back rest. Back rest shall be have both sides colour lamination.Technical details of seat and back rest are mentioned below:Seating bench dimensions shall L 930 mm x W 300 mm x H 450 mm. Front side shall be rounded with post forming. Remaining three edges shall sealed with 2mm thick PVC edge banding tape.Back rest dimensions shall L 930 x H 200 mm Upper side shall be rounded with post forming Remaining three edges shall be sealed with 2mm thick PVC edge banding tape. Desk Shelve shall be made of prime quality 0.8mm thick CRCA sheet of H150mmxD300mm and side stiffeners of CRCA tube size 19mmx19mmx1mmthick. One vertical support (partition) of square tube size 25mm square x1.2mm thick must be provided at centre of tray . Upper modesty made of prime quality 0.8mm thick CRCA Sheet Powder Coated should be embossed with dimples in round shape, height will be 150mm, there should be Perforated lower modesty Made of prime quality 0.8 mm thick CRCA sheet of size H150mmXD21mm with square perforation, CRCA Tube of size 19x19x1mm thick to be inserted for full length at bottom of Jali . Bag hook should be provide on both side of piller made of minimum 4mm dia rod Side frame structure:- Made of prime quality CRCA pressed form section 165mmx25mmx1mm thick welded to 25mmx50mmx1.2mm thick CRCA tube , Seat and back side frame structure made of prime quality CRCA pressed form section 165mmx25mmx1mm thick welded to 25.4mm diameter x 1.6mm thick ERW-1pipe , there will be 8no. horizontal supports are 25mmx25mmx1.2mm thick CRCA pipes. .Bottom Rectangular tube 50x25x 1.2mm thick should be closed with PPCP cap bothside sand pipe dia. 25.4x1.6mm thick should be closed with metal (Backside) and other side (Undertheseat) PPCP cap, complete as per engineer incharge Desk should be in semi knock down form with the help 16 connecting pipes ; 8 pipes on each side : connecting pipe size will be 20x20x1.2mm .All Metal Pieces Shall Be Welded Properly Strongly and conformity with regulations with CO2 Welding Shall Be Used , CRCA Metal Shall Be Coated After Being Treated With At Least Three Stages And Cleaned From Oil , Grease , Dust And Other Dirt Using Special Thermal Control Coating For Metal Furniture To Form a Layer Of Base Coating Of (iron phosphating) (0.4 – 0.8) gm/m² , Automatic Spray Coating Shall Be Applied To Be Followed By a Drying Process In a Thermal Furnace With Suitable Temperature And Time For The Process , Metal Pipe & 7 tank treatment with minimum 45-50 micron powder coating. (ii) CLASSROOM DESK MEDIUM SIZESupply & installation Medium Desk (for two persons)-The overall dimensions of desk will be 900mm x 890mm x Height 690mm, complete as per Specifications enclosed and direction of Engineer-in- charge having the Table top shall be made up of 18.0 mm thick plywood IS 303 of MR Grade OSL (one side shall be laminated, and other side shall have balancer finish). Table top dimensions shall be W 890 mm x D 380 mm. Edge towards bench shall be post formed with round edge. The remaining three edges must be sealed with 2mmthick PVC edge banding tape. Edge band must be trimmed on edges and corners.The desk shall be have low chemical emission of VOCs (Voltage Organic Compounds) and carcinogens, contributing to a healthier room environment. Seat and back rest shall be made of 18mm thick plywood of MR Grade OSL (one side shall be laminated, and other side shall have balancer finish) except back rest. Back rest shall be have both sides colour lamination. Technical details of seat and back rest are mentioned below:Seating bench dimensions shall L 890 mm x W 300 mm x H 400 mm. Front side shall be rounded with post forming. Remaining three edges shall sealed with 2mm thick PVC edge banding tape. Back rest dimensions shall L 890 x H 200 mm Upper side shall be rounded with post forming Remaining three edges shall be sealed with 2mm thick PVC edge banding tape. Desk Shelve shall be made of prime quality 0.8mm thick CRCA sheet of H150mmxD300mm and side stiffeners of ss CRCA tube size 19mmx19mmx1mmthick. One vertical support (partition) of square tube size 25mm square x1.2mm thick must be provided at centre of tray . Upper moedsty made of prime quality 0.8mm thick CRCA Sheet Powder Coated should be embossed with dimples in round shape, height will be 150mm, there should be Perforated lower modesty Made of prime quality 0.8 mm thick CRCA sheet of size H150mmXD21mm with square perforation, CRCAT ube of size 19x19x1mm thick to be inserted for full length at bottom of Jali . Bag hook should be provide on both side of piller made of minimum 4mm dia rod Side frame structure:- Made of prime quality CRCA pressed form section 165mmx25mmx1mm thick welded to 25mmx50mmx1.2mm thick CRCA tube , Seat and back side frame structure made of prime quality CRCA pressed form section 165mmx25mmx1mm thick welded to 25.4mm diameter x 1.6mm thick ERW-1pipe , there will be 8no. horizontal supports are 25mmx25mmx1.2mm thick CRCA pipes. Bottom Rectangular tube 50x25x 1.2mm thick should be closed with PPCP cap bothside sand pipe dia. 25.4x1.6mm thick should be closed with metal (Backside) and other side (Undertheseat) PPCP cap, complete as per engineer incharge Desk should be in semi knock down form with the help 16 connecting pipes ; 8 pipes on each side : connecting pipe size will be 20x20x1.2mm .All Metal Pieces Shall Be Welded Properly Strongly and conformity with regulations with CO2 Welding Shall Be Used , CRCA Metal Shall Be Coated After Being Treated With At Least Three Stages And Cleaned From Oil , Grease , Dust And Other Dirt Using Special Thermal Control Coating For Metal Furniture To Form a Layer Of Base Coating Of (iron phosphating) (0.4 – 0.8) gm/m² , Automatic Spray Coating Shall Be Applied To Be Followed By a Drying Process In a Thermal Furnace With Suitable Temperature And Time For The Process , Metal Pipe & 7 tank treatment with minimum 45-50 micron powder coating. (iii)TEACHER TABLE :Supplying and installation of knock down type Office Table made of Pre-laminated MDF board with decorative lamination on one side and balancing lamination on other side top of size 1200 X 600 X 750 mm. Worktop shall be rounded in all four corners and should have an overhung of 50mm alongwith one drawer unit made of 0.5mm thick CRCA Steel sheet. The table top shall be supported over legs consists of 4 Powdered coated MS legs with connected beams with pipe size 25x25x1.2 mm thick. (iv)Teachers Chair, Overall Dimension:- W600±10 x 600D ±10 x 890H ±10 mm,Seat of Medium back Visitor chair is made of 12mm thick hot pressed plywood pasted with PU Moulded foam with Fabric upholstery on Seat , Used PU Moulded foam on Seat of D-45 kg/m3, Back of Medium back chair is made of Injection moulded PP material structure with Mesh fabric, Seat Size:- 460W ±10 x 470D±10 x 60Thick. ±5 mm , Back Size:- 440W ±10 x 470H ±10,Armrest:- Fixed PP armrest ,Understructure:- Cantilever frame made SS Polished Finish round pipe with Plastic bushes . Frame Material -SS 202 Polished Finish (v) TEACHER BOARD [Excluding cost of Interactive Flat-Panel Display (IFPD)]Technical Specification for Smart Board with Double-Track Sliding System for Green and White Boards fitted in an Anodised Aluminium Frame with concealed cable management and provision for mounting of Digital Screen:Supply, installation, testing, commissioning (SITC) of an integrated digital teaching–learning solution comprising: (a) Anodised Aluminium Frame, double track sliding system for white & green board and provision for mounting of digital screen with concealed cable management,(b) Vitrified magnetic ceramic-steel Green Board and White Board panels. • Dimensions and Configuration: Total Width of the Setup is ~12 feet and height ~4.0 feet from the board surface (excluding the width of aluminium frame).• Material: Providing and fixing anodised aluminium (alloy 6063-T6) framed sliding system for smart board with minimum 2.0 mm thick extruded sections, anodised to AA15 grade as per IS 1868, mounted on a heavy-duty top-hung aluminium track (min. 2.5 mm thick) with sealed ball-bearing nylon/PU rollers (load capacity not less than 120 kg per panel), concealed bottom guide, EPDM gaskets, SS-304 fasteners, pelmet/valance cover, and soft end-stops/soft-close mechanism, including all brackets, fixings, alignment, cable provisions, commissioning, and making good complete as per drawings and Engineer-in-Charge.• Design: One slot to fix IFPD, other slot for Green & White boards sliding on double track system with Locking facility on sliding frame to keep the IFPD display safe.• Top & Bottom Rails: Tracks shall be aligned and reinforced to ensure boards move easily and without wobble.• Back Side: The backside of the smart board, to concealed the wall surface, provided & fixed with 18 mm thick HDHMR board laminated (white coloured matte finish) with 0.8 mm, edges sealed with 1 mm PVC edge banding, fixed to the anodised aluminium frame with concealed screws/rivets, with ventilation slots as required, and shall be moisture, termite and borer resistant.• Load Capacity: Safe to hold IFPD + white & Green boards with ≥1.5× safety factor.• Cable Management: Built-in channels for power, LAN, HDMI, USB.• Safety: Rounded edges, tamper-resistant covers, concealed fixing. • Finish: Durable, corrosion-resistant coating suitable for indoor use.• Additional Requirements: (a) All boards and the structure must be securely fixed to the wall with appropriate fasteners.(b) Provision for cable management must be included for the IFPD (i.e., concealed conduit/path for power and data cables). (c) The unit must be free from sharp edges, splinters, or any protruding parts that could cause injury.(d) Installation height should ensure comfortable writing access for average adult and student height (typically bottom edge ~2.5 to 3 feet from the floor).(b) Vitrified magnetic ceramic-steel Green Board and White Board panels:• Function: Boards shall slide horizontally on a top and bottom aluminium/steel channel track to fully cover or reveal the IFP as needed.• Material: Vitrified ceramic-steel, magnetic, double-coated.• Sliding Boards: Quantity: 1 no. Green board & 1 no. White board.• Green Board Surface: Matte, chalk-friendly, stain/scratch resistant.• White Board Surface: Glossy surface, Dry-erase marker friendly, ghost-free, easy clean.• Size: ~6 feet (W) × 4 feet (H) (Each Board) with thickness 8mm.• Frame: Anodised aluminium, rounded edges, concealed fasteners.Note - Dimensions mentioned are indicative. Actual may vary as per site requirements (B) PRINCIPAL AND VICE-PRINCIPAL ROOM TABLE:Supplying and installation of site knock down type Office Table as per approved design and directrion of Engineer-in-charge.Work Top - Work top shall be made 25mm thick Pre-laminated MDF board with decorative lamination on one side and balancing lamination on other side confirming to IS 12406:2003 with post forming on front, back and machine pressed PVC egde banding 2mm thick glued with industrial adhesive and diffused with board monolithically on other two sides. Table top shall have 75mm overhung on front and 25mm overhung on sides.Understructure- C-type leg shall be made of tubular section of 50mm x 50mm x 1.6mm (wall thickness) thick vertical member and 40mm x40mm x1.6mm (wall thickness) Horizontal M.S. pipe confirming IS-Grade 4932 shall be finished with epoxy polyster powder coated DFT 50-60 Micron. The legs shall be fitted to the ground with M8 screw leveler with the height adjustment up to 15mm. The cross members shall be mounted by end brackets made of 3mm thick CRCA steel sheet confirming IS 513: 2008 and finished with epoxy polyster powder coated DFT 50-60 Micron confirming IS 13871:1993.Wire management - Electrical wires shall be carried from horizintal/ vertical duct made of 0.7mm CRCA steel sheet confirming to IS 513:2008. The switch plate or grommet depending upon requirement shall also be provided for electrical/LAN connection on table top.Modesty Panel -Modesty Panel of height 450mm shall be made of 1.5mm thick CRCA sheet sheet confirming to IS 513: 2008 and shall be finised with epoxy polyster powder coated DFT 50-60micron.Storage body- Storage top shall also be made of 25mm thick Pre-lam MDF board confirming to IS 12406:2003 with post forming on two sides and machine pressed PVC egde banding 2 mm thick glued with industrial adhesive and diffused with board monolithically on other two sides. The body of storage units shall be made of 0.8mm thick CRCA steel Sheet and skirting shall be of 1.2mm thick CRCA steel sheet confirming to IS 513: 2008 finished with epoxy powder coated of DFT 50-60 Micron confirming IS 13871:1993. Internal Shelves shall be also made up of 0.8mm CRCA steel sheet confirming to IS 513: 2008 and shall be mounted with the Metal shelf support pin made of 2mm thick CRCA Steel sheet with Nickel or Chrome plating. M10 screw leveler is given with height adjustment up to 12mm to 15mm. (i) PRINCIPAL ROOM TABLETable of Size 1800mm (W) x 900mm (D) x 750mm (H) with Side Storage of Size 900mm (W) x 450mm (W) X 750mm (H) and Back Storage 1800mm (W) x 450mm (D) x 750mm (H) as per specifications above (ii) VICE-PRINCIPAL ROOM TABLETable of Size 1650mm (W) x 900mm (D) x 750mm (H) with Side Storage of Size 900mm (W) x 450mm (W) X 750mm (H) and Back Storage 1650 mm (W) x 450mm (D) x 750mm (H) as per specifications above. (iii) PRINCIPAL ROOM CHAIRHigh Back Revolving Chair, Overall Dimension:- 700W ±10 x 700D ±10 x 1210H ±10 mm,Seat of Medium back chair is made of 12mm thick hot pressed plywood pasted with PU Moulded foam with Fabric upholstery on Seat,Used PU Moulded foam on Seat of D-45 kg/m3 , Back of chair is made of Injection moulded PP material structure upholstered with Mesh fabric , Adjustable Lumber support upholstered with fabric , Adjustable Headrest on back Upholstered with Mesh Fabric ,Seat Size:- 470W ±10 x 460D ±10 x 70Thick. ±5 mm , Back Size: 500W ±10 x 780H ±10,Mechanism:- The Synchro tilt Mechanism ,Used gaslift of 90 mm size of Class-IV grade,Armrest:- PU padded adjustable armrest fixed with Seat ,Chair Base & Wheels: SS 202 Polished finish Plated base consists of 5 prongs with 640±5 mm pitch circle diameter, 50mm Dia. Black Nylon - Twin Wheel Pin castor . (iv) Principal room Visitor Chair, Overall Dimension:- W600±10 x 600D ±10 x 890H ±10 mm,Seat of Medium back Visitor chair is made of 12mm thick hot pressed plywood pasted with PU Moulded foam with Fabric upholstery on Seat , Used PU Moulded foam on Seat of D-45 kg/m3, Back of Medium back chair is made of Injection moulded PP material structure with Mesh fabric, Seat Size:- 460W ±10 x 470D±10 x 60Thick. ±5 mm , Back Size:- 440W ±10 x 470H ±10,Armrest:- Fixed PP armrest ,Understructure:- Cantilever frame made SS Polished Finish round pipe with Plastic bushes . Frame Material -SS 202 Polished Finish (v) VICE-PRINCIPAL ROOM CHAIRHigh Back Revolving Chair, Overall Dimension:- 700W ±10 x 700D ±10 x 1210H ±10 mm,Seat of Medium back chair is made of 12mm thick hot pressed plywood pasted with PU Moulded foam with Fabric upholstery on Seat,Used PU Moulded foam on Seat of D-45 kg/m3 , Back of chair is made of Injection moulded PP material structure upholstered with Mesh fabric , Adjustable Lumber support upholstered with fabric , Adjustable Headrest on back Upholstered with Mesh Fabric ,Seat Size:- 470W ±10 x 460D ±10 x 70Thick. ±5 mm , Back Size: 500W ±10 x 780H ±10,Mechanism:- The Synchro tilt Mechanism ,Used gaslift of 90 mm size of Class-IV grade, Armrest:- PU padded adjustable armrest fixed with Seat ,Chair Base & Wheels: SS 202 Polished Finish base consists of 5 prongs with 640±5 mm pitch circle diameter, 50mm Dia. Black Nylon - Twin Wheel Pin castor . (vi) Vice Principal Visitor Chair: Overall Dimension:- W600±10 x 600D ±10 x 890H ±10 mm,Seat of Medium back Visitor chair is made of 12mm thick hot pressed plywood pasted with PU Moulded foam with Fabric upholstery on Seat , Used PU Moulded foam on Seat of D-45 kg/m3, Back of Medium back chair is made of Injection moulded PP material structure with Mesh fabric, Seat Size:- 460W ±10 x 470D±10 x 60Thick. ±5 mm , Back Size:- 440W ±10 x 470H ±10,Armrest:- Fixed PP armrest ,Understructure:- Cantilever frame made SS Polished Finish round pipe with Plastic bushes . Frame Material -SS 202 Polished Finish (C) SOFA SET (i)SOFA FOYER ONE SEATER Size in mm - 880(L) X 755(D) X 750(H) Seat Wooden Structure Uphostered With Leatherite & HD Foam 32 Softy. SS Chrome . Sofa S57 Max. Height 750mm . The rounded Armrests Provided Sleek And Stylish Look With The Pillowed Back . Arm Rest Leatherite Covered With Solid Wood Structure . Understructure Made By Solid Wood Structures With Heavy Quality Spring For Maximum Comfort , Taper Type 25mm Round Spiral Spring . Legs Round Pipe Chrome Plated Legs . Understructure Made of Base Frame Strongly Jointed Wooden Plywood Parts . 3 Seater Sofa Seat Height From Ground 460mm .3 Seater Sofa 2020W x 760D x 750H , 2 Seater Sofa 1450W x 760D x 750H . Seat Height From Ground 460mm & 1 Seater Sofa 880W x 760D x 750H . 100mm High Legs. (ii)SOFA FOYER TWO SEATER Size in mm - 1460(L) X 755(D) X 750(H)Seat Wooden Structure Uphostered With Leatherite & HD Foam 32 Softy. SS Chrome . Sofa S57 Max. Height 750mm . The rounded Armrests Provided Sleek And Stylish Look With The Pillowed Back . Arm Rest Leatherite Covered With Solid Wood Structure . Understructure Made By Solid Wood Structures With Heavy Quality Spring For Maximum Comfort , Taper Type 25mm Round Spiral Spring . Legs Round Pipe Chrome Plated Legs . Understructure Made of Base Frame Strongly Jointed Wooden Plywood Parts . 3 Seater Sofa Seat Height From Ground 460mm .3 Seater Sofa 2020W x 760D x 750H , 2 Seater Sofa 1450W x 760D x 750H . Seat Height From Ground 460mm & 1 Seater Sofa 880W x 760D x 750H . 100mm High Legs. (iii)SOFA FOYER THREE SEATER Size in mm - 1930(L) X 755(D) X 750(H)Seat Wooden Structure Uphostered With Leatherite & HD Foam 32 Softy. SS Chrome . Sofa S57 Max. Height 750mm . The rounded Armrests Provided Sleek And Stylish Look With The Pillowed Back . Arm Rest Leatherite Covered With Solid Wood Structure . Understructure Made By Solid Wood Structures With Heavy Quality Spring For Maximum Comfort , Taper Type 25mm Round Spiral Spring . Legs Round Pipe Chrome Plated Legs . Understructure Made of Base Frame Strongly Jointed Wooden Plywood Parts . 3 Seater Sofa Seat Height From Ground 460mm .3 Seater Sofa 2020W x 760D x 750H , 2 Seater Sofa 1450W x 760D x 750H . Seat Height From Ground 460mm & 1 Seater Sofa 880W x 760D x 750H . 100mm High Legs. (iv) Coffee Table The coffee table measures 900 mm (W) × 600 mm (D) × 450 mm (H) and features a 10 mm thick clear tempered glass top and shelf supported on a Stainless Steel 202 frame made of 40×40 mm square tubes with a mirror-polished finish. All joints are argon-welded, ground, and buffed for a seamless look. The lower glass shelf for additional storage, and rubber pads or level adjusters are provided at the base for stability and floor protection. The table combines modern design, durability, and elegant finish, making it ideal for offices and reception areas. (D) STAFFROOM (i) TABLE (SEATING CAPACITY AS PER ACTUAL REQUIREMENT)Supplying and installation of a modular, knock-down center island table sized approximately 3600 mm in length (adjustable to actual requirements) by 1350 mm in width and 750 mm in height, constructed from high-quality 25 mm thick commercial grade plywood or BWR (Boiling Water Resistant) grade plywood with decorative lamination on visible faces and balanced lamination beneath for enhanced strength and moisture resistance. All edges are sealed with 2 mm thick machine-pressed PVC edge banding bonded with industrial adhesive to ensure a seamless, monolithic appearance. The gable ends are fabricated of the same 25 mm thick commercial grade plywood with decorative lamination on both sides and matching edge banding for consistent aesthetics and superior durability. Modesty 18mm matching laminate. The table shall have an underbody vertical support panel running continuously along its length to enhance stability and strength. The understructure uses precision-cut, laminated plywood panels assembled with knock-down fittings for ease of installation and future reconfiguration, ensuring superior load-bearing capacity and long-term durability. A concealed wire management system beneath the worktop integrates pre-laminated plywood cable trays or high-quality plastic trays fixed with durable brackets, complete with provisions for switch plates and grommets to facilitate safe, organized routing of electrical and data cables. All surfaces are finished for scratch and stain resistance with anti-fungal and moisture-resistant properties, and installation will follow best woodworking practices, with final dimensions and seating capacity determined by the actual site layout. (ii) WORK SPACE WITH IN-BUILT LOCKABLE OVERHEAD STORAGE SPACE FOR STAFFROOM (AS PER ACTUAL REQUIREMENT)Supplying and installation of site knock-down type modular wall-mounted workspace unit of approximate size 900W x 600D x 750H mm (for one staff), including working counter and lockable overhead storage cabinet of 900W x 450D x 650H mm. The structure shall be made of 18 mm thick BWP grade plywood with decorative laminate on external surfaces and balancing laminate on inner faces conforming to IS:303/IS:12406. All exposed edges shall be sealed with 2 mm PVC edge banding. The worktop shall be 25 mm thick Laminated Plywood board with post-formed front edge and machine-pressed PVC edge banding, securely fixed to the wall using concealed MS cleats and brackets. The overhead cabinet shall be fitted with soft-close concealed hinges, SS handles, and magnetic catchers of approved make, with one adjustable shelf and modular connectors for alignment and expansion to adjoining units.Each workspace shall include provision for electrical connectivity with 6A/16A modular sockets (as per requirement) positioned at approximately 450 mm above finished floor level for easy access. The worktop shall have a circular cable hole (50–60 mm diameter) with grommet for laptop and equipment wiring. All wiring, sockets, and conduits shall be concealed neatly within the table body, routed through internal PVC raceways to maintain a clean, clutter-free appearance. Junction boxes and ducts shall be integrated to provide safe, organized cable management without visible wiring.The entire unit shall be wall-mounted using heavy-duty MS brackets or suitable fasteners based on wall type, finished neatly with matching silicone sealant at all joints. All fittings and hardware, including soft-close hinges and handles, shall be of reputed make. The unit shall be termite-resistant, moisture-resistant, easy to maintain, and made from ISI-marked prime quality boards. The overall layout and detailing shall match the approved reference image, with actual dimensions finalized as per site requirements and direction of the Engineer-in-Charge. (iii) ChairOverall Dimension:- W600±10 x 600D ±10 x 890H ±10 mm,Seat of Medium back Visitor chair is made of 12mm thick hot pressed plywood pasted with PU Moulded foam with Fabric upholstery on Seat , Used PU Moulded foam on Seat of D-45 kg/m3, Back of Medium back chair is made of Injection moulded PP material structure with Mesh fabric, Seat Size:- 460W ±10 x 470D±10 x 60Thick. ±5 mm , Back Size:- 440W ±10 x 470H ±10,Armrest:- Fixed PP armrest ,Understructure:- Cantilever frame made SS Polished Finish round pipe with Plastic bushes . Frame Material -SS 202 Polished Finish (iv) PERSONAL LOCKER UNIT FOR PRINCIPAL AND VICE PRINCIPAL ROOMSupplying and installation of Metal Lockers with Cam Lock one unit consiting of 380mm (W) x 450mm (D) x 1800 mm (H) with 4 Lockers.Body-LH and RH Side and back panel is made up of 0.8mm thick CRCA steel sheet confirming to IS 513:2008. Shelf hanging bracket is welded on both the side panel by spot welding. Shelf hanging bracket is made up of 0.8mm thick CRCA steel sheet confirming to IS 513:2008. front frame, top and bottom part made up 0.8mm thick CRCA steel sheet confirming to IS 513:2008 and horizontal part is made up 0.8 mm thick CRCA Steel sheet confirming to IS 513:2008. On a front frame horizontally provision is given at a common distance to hold shutter bracket. Locker’s top is made up of 0.8mm thick CRCA Steel sheet confirming IS 513:2008 which is having standard dimension 375 x378mm. Shelf is also made up of 0.8 mm CRCA Steel sheet confirming to IS 513:2008.Shutter- Is made up on 0.8mm thick CRCA Steel sheet confirming to IS 513:2008. All the shutter are hung on shutter pin and shutter bracket, louvers are given in shutter for air flow. PVC flush handle and name plate is used for handling and for name plate tagging. Standard locking arrangment is used for locking each shutter.The bodies including shelves are given anti-rust surface treatment & are powder coated with epoxy polyester powder coating of DFT 50- 60 Micron confirimg to IS 13871:1993. (E)LIBRARY (i) Supply and installation of Glass-door Storage of Size 915 mm (W) x 482mm (D) x 1980mm (H). It should have shelf thickness of 0.8mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) with clear glass of > 4.0 mm thick and all other components shall have a thickness of 0.8mm. These components shall be made of CRCA steel sheet ‘D’ grade high yield strength as per IS 513:2008 The glass door storwel shall have a SS handle and a Two-way locking mechanism with shooting bolt. It should have a height-wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base.All metal components would be epoxy polyster powder coated DFT 50-60 Micron confirimg to IS 13871:1993. (ii) Wall mounted built in open book shelf : Overall Size 900L (length may vary as per actual requirement) X300DX2100Hmm,Top made up of 18mm thick Postlam plywood with PVC edge banding ,Side panel made up of 18mm thick Postlam plywood with PVC edge bending , Skirting made up of 18mm thick Postlam plywood with PVC edge bending ,back panel made up of 18mm thick Postlam plywood , One number of Bottom Storage Cabinets alongwith the complete length of heght 600mm as per ref. image ,shelf made up of 18mm thick Postlam plywood with PVC edge bending, all Wooden Panels Fix Joints With Minifix Dowels & other Fitting Equipment , All Wooden Panels Prime Quality Board With ISI Marked. Complete structure design should be as per reference image. (iii) TABLE (SEATING CAPACITY AS PER ACTUAL REQUIREMENT)Supplying and installation of a modular, knock-down center island table sized approximately 3600 mm in length (adjustable to actual requirements) by 1350 mm in width and 750 mm in height, constructed from high-quality 25 mm thick commercial grade plywood or BWR (Boiling Water Resistant) grade plywood with decorative lamination on visible faces and balanced lamination beneath for enhanced strength and moisture resistance. All edges are sealed with 2 mm thick machine-pressed PVC edge banding bonded with industrial adhesive to ensure a seamless, monolithic appearance. The gable ends are fabricated of the same 25 mm thick commercial grade plywood with decorative lamination on both sides and matching edge banding for consistent aesthetics and superior durability. Modesty 18mm matching laminate. The table shall have an underbody vertical support panel running continuously along its length to enhance stability and strength. The understructure uses precision-cut, laminated plywood panels assembled with knock-down fittings for ease of installation and future reconfiguration, ensuring superior load-bearing capacity and long-term durability. A concealed wire management system beneath the worktop integrates pre-laminated plywood cable trays or high-quality plastic trays fixed with durable brackets, complete with provisions for switch plates and grommets to facilitate safe, organized routing of electrical and data cables. All surfaces are finished for scratch and stain resistance with anti-fungal and moisture-resistant properties, and installation will follow best woodworking practices, with final dimensions and seating capacity determined by the actual site layout. (iv) Chair, Overall Dimension:- W600±10 x 600D ±10 x 890H ±10 mm,Seat of Medium back Visitor chair is made of 12mm thick hot pressed plywood pasted with PU Moulded foam with Fabric upholstery on Seat , Used PU Moulded foam on Seat of D-45 kg/m3, Back of Medium back chair is made of Injection moulded PP material structure with Mesh fabric, Seat Size:- 460W ±10 x 470D±10 x 60Thick. ±5 mm , Back Size:- 440W ±10 x 470H ±10,Armrest:- Fixed PP armrest ,Understructure:- Cantilever frame made SS Polished Finish round pipe with Plastic bushes . Frame Material -SS 202 Polished Finish (F) COMPUTER LAB (i) COMPUTER WORK STATIONSupplying and installation of knock down type Dual Computer Work Station of unit Size 1500mm (Length, actual Length may vary as per actual site requirement) x 600m (W) x 750mm (H) for two studentsWork Top- Work top shall be made 25mm thick Laminated Plywood with decorative lamination on one side and balancing lamination on other side confirming to IS 12823: 1990 with 2mm thick Machine pressed PVC edge banding glued with industrial adhesive and monolithically diffused with board on all sides.Understructure supporting frame consist of laminated Plywood Gable ends of 18mm Wire management-The Vertical /Electrical duct & Horizontal Cable tray ( wire carriers) are made of CRCA steel sheet & fixed to the understructure below worktop with specially designed brackets. Provision for fixing Switch plates are privided in the cable tray for easy access through wire mangaer or PVC grommet. (ii) COMPUTER CHAIR FOR STUDENTMedium Back Revolving Chair, Overall Dimension:- 700W ±10 x 700D ±10 x 1010H ±10 mm,Seat of Medium back chair is made of 12mm thick hot pressed plywood pasted with PU Moulded foam with Fabric upholstery on Seat ,Used PU Moulded foam on Seat of D-45 kg/m3 , Back of chair is made of Injection moulded PP material structure combination of upholstered with Mesh fabric , Seat and back connected through metal powder coated plate having Adjustable Lumber support upholstered with fabric , Seat Size:- 490W ±10 x 450D ±10 x 70Thick. ±5 mm , Back Size: 525W ±10 x640H ±10,Mechanism:- The Synchro tilt Mechanism ,Using gaslift of 90 mm size of Class 3 grade,Armrest: PU Padded Adjustable armrest,Chair Base & Wheels: Revolving Pedestal SS 202 Polsihed Finish base consists of 5 prongs with 640±5 mm pitch circle diameter, 50mm Dia. Black Nylon - Twin Wheel Pin castor . (G) LABORATORIES (i) Supply and installation of Glass-door Storage of Size 915 mm (W) x 482mm (D) x 1980mm (H). It should have shelf thickness of 0.8mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) with clear glass of > 4.0 mm thick and all other components shall have a thickness of 0.8mm. These components shall be made of CRCA steel sheet ‘D’ grade high yield strength as per IS 513:2008 The glass door storwel shall have a SS handle and a Two-way locking mechanism with shooting bolt. It should have a height-wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base.All metal components would be epoxy polyster powder coated DFT 50-60 Micron confirimg to IS 13871:1993. (i) PHYSICS LAB ALONG THE WALL TABLE:: Supply and installation of Along-the-wall knock down type modular laboratory tables of size 1400 MM(L) (Length may vary as per actual requirement) × 750 MM (W) × 900MM H . Above the counter, with an internal conduit for all wiring. Modular switch plates and 02 nos of 220V/16A Switch socket (with individual circuit protection) will be CNC-mounted every 1 m (or per site layout). All conduits and components shall comply with applicable laboratory safety and performance standards. Dust-proof, removable access covers to permit maintenance and future upgrades, and outlets to be ergonomically positioned for seated and standing use. Additional switches and sockets shall be provided as required.All base storage cabinets shall be of the design “1 Drawer + 2 Shutters” made of 0.8 mm thick Powder Coated CRCA. Each storage box without granite shall be 600W × 570D × 713H, supported on 100 mm legs and shall include rubber shoes at the bottom of each leg to prevent floor damage and ensure stability. The upper top shall be of 18-19 mm thick black granite, with all joints sealed using silicon sealant. The cabinet bodies shall be of over-closing design, fabricated entirely on CNC machines to ensure precision. The storage bodies shall be neatly jointed with accurately matched sides to avoid gaps. Shutters shall be made of 0.8 mm thick powder coated CRCA with handles, and drawers shall run on Soft close sliding channels (35-50kg).The worktops shall be of 18-19 mm thick black granite, flushed with sink units and taps. Installation shall include all utility service outlets, accessory fittings, plumbing, electrical switches, and fittings shall be as per requirement.All metallic parts shall be with corrosion resistant coating and shall be welded strongly using CO₂ welding, conforming to safety regulations. Panels shall be secured with nuts, bolts, and riveting. ISLAND TABLE:The laboratory table shall be provided as knock down type modular ISLAND laboratory tables units of overall size 8000(L) (Length may vary as per actual requirement) × 1500(W) × 900H . It shall be constructed in modular segments of 1400(L) × 1500(W) × 860(H) mm each for ease of manufacture, handling, and installation. The worktops will include a powder-coated bus running their full length, above the counter, with an internal conduit for all wiring. Modular switch plates and 04 nos (02 Facing each side) of 220V/16A Switch socket (with individual circuit protection) will be CNC-mounted every 1 m (or per site layout). All conduits and components shall comply with applicable laboratory safety and performance standards. Dust-proof, removable access covers to permit maintenance and future upgrades, and outlets to be ergonomically positioned for seated and standing use. Additional switches and sockets shall be provided as required.All base storage cabinets shall be of the design “1 Drawer + 2 Shutters” made of 0.8 mm thick Powder Coated CRCA. Each storage box without granite shall be 600W × 570D × 713H, supported on 100 mm legs and shall include rubber shoes at the bottom of each leg to prevent floor damage and ensure stability. The upper top shall be of 18-19 mm thick black granite, with all joints sealed using silicon sealant. The cabinet bodies shall be of over-closing design, fabricated entirely on CNC machines to ensure precision. The storage bodies shall be neatly jointed with accurately matched sides to avoid gaps. Shutters shall be made of 0.8 mm thick Powder Coated CRCA with handles, and drawers shall run on Soft close sliding channels (35-50kg).The worktops shall be of 18-19 mm thick black granite, flushed with sink units and taps. Installation shall include all utility service outlets, accessory fittings, plumbing, electrical switches, and fittings shall be as per requirement.All metallic parts shall be with corrosion resistant coating and shall be welded strongly using CO₂ welding, conforming to safety regulations. Panels shall be secured with nuts, bolts, and riveting. (ii) CHEMISTY LAB ALONG THE WALL TABLE: Supply and installation of Along-the-wall knock down type modular laboratory tables of size 1400(L) (Length may vary as per actual requirement) × 750(W) × 900(H) mm × 1550H (two-tier). Four standard SS304 sinks shall be installed, each fitted with a 3-way SS 304 faucet of Premium make. Reagent racks made completely out of stainless steel shall be provided to cover the entire table length(along the wall) except the sink area. These racks shall be 300D × 700H and of complete modular design, consisting of two horizontal storage shelves made of stainless steel with suitable cutouts for electrical switches and sockets. Additional switches and sockets shall be provided as required.All base storage cabinets shall be of the design “1 Drawer + 2 Shutters” made of 0.8 mm thick stainless steel sheet polished finish. Each storage box without granite shall be 600W × 570D × 713H, supported on 100 mm SS legs and shall include rubber shoes at the bottom of each leg to prevent floor damage and ensure stability. The upper top shall be of 18-19 mm thick black granite, with all joints sealed using silicon sealant. The cabinet bodies shall be of over-closing design, fabricated entirely on CNC machines to ensure precision. The storage bodies shall be neatly jointed with accurately matched sides to avoid gaps. Shutters shall be made of 0.8 mm thick powder coated stainless steel sheet with handles, and drawers shall run on Soft close sliding channels (35-50kg).Reagent shelves shall be made of a SS 304, provided with electrical switches, sockets, and cutouts as required. The worktops shall be of 18-19 mm thick black granite, flushed with sink units and taps. Installation shall include all utility service outlets, accessory fittings, plumbing, electrical switches, and fittings shall be as per requirement.All metallic parts shall be with corrosion resistant coating and shall be welded strongly using CO₂ welding, conforming to safety regulations. Panels shall be secured with nuts, bolts, and riveting. ISLAND TABLE: The laboratory table shall be provided as knock down type modular ISLAND laboratory tables units of overall size 8000(L) (Length may vary as per actual requirement) × 1500(W) ×900(H) mm × 1550H (two-tier). It shall be constructed in modular segments of 1600(L) × 1500(W) × 860(H) mm each for ease of manufacture, handling, and installation. Four standard SS304 sinks shall be installed, each fitted with a 3-way SS 304 faucet of Premier make. Stainless steel 304 reagent racks shall be provided across the entire table length in centre except the sink areas, with dimensions 300D × 700H. These racks shall also be of modular design with two horizontal stainless steel shelves, cutouts for switches and sockets, provision for electrical outlets, and accommodation for granite pieces.All base storage cabinets shall be of the design “1 Drawer + 2 Shutters” made of 0.8 mm thick Powder Coated CRCA. Each storage box without granite shall be 600W × 570D × 713H, supported on 100 mm SS legs and shall include rubber shoes at the bottom of each leg to prevent floor damage and ensure stability. The upper top shall be of 19 mm thick black granite, with all joints sealed using silicon sealant. The cabinet bodies shall be of over-closing design, fabricated entirely on CNC machines to ensure precision. The storage bodies shall be neatly jointed with accurately matched sides to avoid gaps. Shutters shall be made of 0.8 mm thick powder coated Powder Coated CRCA with handles, and drawers shall run on Soft close sliding channels (35-50kg).Reagent shelves shall be made of a polished finish SS, provided with electrical switches, sockets, and cutouts as required. The worktops shall be of 19 mm thick black granite, flushed with sink units and taps. Installation shall include all utility service outlets, accessory fittings, plumbing, electrical switches, and fittings shall be as per requirement.All metallic parts shall be with corrosion resistant coating and shall be welded strongly using CO₂ welding, conforming to safety regulations. Panels shall be secured with nuts, bolts, and riveting. (iii) BIOLOGY LAB TABLE ALONG THE WALL TABLE: Supply and installation of Along-the-wall knock down type modular laboratory tables of size 1400(L) (Length may vary as per actual requirement) × 750(W) × 900(H) mm × 1550H (two-tier). Four standard SS304 sinks shall be installed, each fitted with a 3-way SS 304 faucet of Premium make. Reagent racks made completely out of stainless steel shall be provided to cover the entire table length(along the wall) except the sink area. These racks shall be 300D × 700H and of complete modular design, consisting of two horizontal storage shelves made of stainless steel with suitable cutouts for electrical switches and sockets. Additional switches and sockets shall be provided as required.All base storage cabinets shall be of the design “1 Drawer + 2 Shutters” made of 0.8 mm thick stainless steel sheet polished finish. Each storage box without granite shall be 600W × 570D × 713H, supported on 100 mm SS legs and shall include rubber shoes at the bottom of each leg to prevent floor damage and ensure stability. The upper top shall be of 18-19 mm thick black granite, with all joints sealed using silicon sealant. The cabinet bodies shall be of over-closing design, fabricated entirely on CNC machines to ensure precision. The storage bodies shall be neatly jointed with accurately matched sides to avoid gaps. Shutters shall be made of 0.8 mm thick powder coated stainless steel sheet with handles, and drawers shall run on Soft close sliding channels (35-50kg)..Reagent shelves shall be made of a SS, provided with electrical switches, sockets, and cutouts as required. The worktops shall be of 18-19 mm thick black granite, flushed with sink units and taps. Installation shall include all utility service outlets, accessory fittings, plumbing, electrical switches, and fittings shall be as per requirement.All metallic parts shall be with corrosion resistant coating and shall be welded strongly using CO₂ welding, conforming to safety regulations. Panels shall be secured with nuts, bolts, and riveting. ISLAND TABLE: The laboratory table shall be provided as knock down type modular ISLAND laboratory tables units of overall size 8000(L) (Length may vary as per actual requirement) × 1500(W) × 900(H) mm × 1550H (two-tier). It shall be constructed in modular segments of 1400(L) × 1500(W) × 900(H) mm each for ease of manufacture, handling, and installation. Four standard SS304 sinks shall be installed, each fitted with a 3-way SS 304 faucet of Premium make. Stainless steel reagent racks shall be provided across the entire table length in centre except the sink areas, with dimensions 300D × 700H. These racks shall also be of modular design with two horizontal stainless steel shelves, cutouts for switches and sockets, provision for electrical outlets, and accommodation for granite pieces.All base storage cabinets shall be of the design “1 Drawer + 2 Shutters” made of 0.8 mm thick Powder Coated CRCA. Each storage box without granite shall be 600W × 570D × 713H, supported on 100 mm legs and shall include rubber shoes at the bottom of each leg to prevent floor damage and ensure stability. The upper top shall be of 18-19 mm thick black granite, with all joints sealed using silicon sealant. The cabinet bodies shall be of over-closing design, fabricated entirely on CNC machines to ensure precision. The storage bodies shall be neatly jointed with accurately matched sides to avoid gaps. Shutters shall be made of 0.8 mm thick Powder Coated CRCA with handles, and drawers shall run on Soft close sliding channels (35-50kg)..Reagent shelves shall be made of polished finish SS, provided with electrical switches, sockets, and cutouts as required. The worktops shall be of 18-19 mm thick black granite, flushed with sink units and taps. Installation shall include all utility service outlets, accessory fittings, plumbing, electrical switches, and fittings shall be as per requirement.All metallic parts shall be with corrosion resistant coating and shall be welded strongly using CO₂ welding, conforming to safety regulations. Panels shall be secured with nuts, bolts, and riveting. (iv) LAB STOOLSupply and installation of Lab Stool Seat Revolving Stool with Backrest Overall Dimension: 410W ±10 x 410D ±10 x 820H ±10 mm,Seat of chair is made of 12mm thick hot pressed Plywood pasted with High Density PU foam & Leatherette upholstery, Back is made of 12mm thick hot pressed Plywood pasted with PU foam D -40 kg/m3 , H-20 Seat and back fixed through metal powder coated Spine covered with plastic cover, Seat Size: 400W ±10 x 400D ±10 x 75Thick. ±5 mm, Back Size: 450W ±10 x 240H ±10 x 50Thick. ±5mm, Ground to seat height-440-560mm, Mechanism:- Machanism Design With Features Of Revolving At 360 Degree. Machanism Provided Upright Position Locking, Seating Height Can Be Adjusted With a Pneumatic Gas Lift,Gaslift: Lift -Used gaslift of 90 mm size of Class- IV grade with plastic bellow cover, Chair Base & Wheels: Chair Base Made of polished finished SS 202 grade stainless steel, base consists of polished finished SS 202 grade stainless steel 5 prongs with 560±5 mm pitch circle diameter, Polished finished SS 202 grade stainless steel circular foot rest as per ref. image, 50mm Dia. Black Nylon - Twin Wheel Pin castor. 2 KITCHEN & DINING (A) DINING TABLEDining Table: Polished finish SS Dinning Table consists of Dinning Top is made up of 1 mm thickness Stainless steel sheet of SS 304 Grade with overall dimension of 1800(L) X 700(D) X 750(H). The table top is reinforced with a 18 mm ply Board on Stainless steel frame of square section 40mmx40mmx1.6mm. Dinning top of stainless steel sheet shall be extended to the sides and a depth upto 40 mm under the table top in all directions including edge rounding, grinding and finishing etc. all complete. The Table top shall finish in such a manner to avoid any sharp edges. The table will be supported by four hollow legs made from SS 304 grade stainless steel. The hollow legs shall be of square type of size 50mmx50mmx1.6mm. These legs shall be securely welded or mechanically fastened to the underside of the tabletop frame. For additional structural stability, stainless steel cross supports shall be provided between the legs as shown in figure with 40mmx40mmx1.6mm SS square section. The table shall include rubber shoes at the bottom of each leg to prevent floor damage and ensure stability. The design shall prioritize user safety with no sharp corners or edges. The table must be structurally sound and capable of supporting a uniformly distributed load of at least 250 kg. All materials used must conform to relevant IS standards, and the finished product should be free from burrs, dents, or deformities. SS 304. (B) DINING BENCHDining Bench: The Bench shall be of size 1800 mm in length, 300 mm in depth, and 450 mm in height, suitable for use in residential schools. The bench top shall be made of 18 mm thick HDHMR + Laminated , finished with a 1 mm thick decorative laminate on the top surface, and a balancing laminate backing on the underside to ensure dimensional stability. All exposed edges shall be sealed with PVC edge banding or machine-finished to prevent splinters and enhance durability. The plywood shall be scratch-resistant, water-resistant, and easy to clean, with a light woodgrain or equivalent finish as approved. The supporting frame shall be fabricated frame of square hollow section 40mmx40mmx1.6mm SS 304 grade stainless steel in polished finish. These legs shall be securely welded to the underside of the benchtop frame. The bench shall include rubber shoes at the bottom of each leg to prevent floor damage and ensure stability. The design shall prioritize user safety with no sharp corners or edges. The bench must be structurally sound and capable of supporting a uniformly distributed load of at least 250 kg. All materials used must conform to relevant IS standards, and the finished product should be free from burrs, dents, or deformities. 3 BOYS AND GIRLS DORMITORIES BEDs/ Partition wallIn Dormitory Hall, RCC Bed (900mmX1800mm) with 18mm HDHMR with with 1mm Matt-finish laminate on top of bed shall be provided. RCC partition wall cladding must be using 8mm Plywood covered with 2mm Matt-finish laminate all around corners and no sharp edges. With all fixtures fasteners adhesives etc all inclusive required for fixing. 4 STAFF QUARTERS (A) ROOMS WARDROBE Fabricating, Supplying, Fixing & Placing In position Wardrobe of size 900 (L) x 1800 (H) x 600 (D). The unit comprises of Wardrobe including, a single drawer, Hanger Rod,in Pre laminated HDHMR board of 18mm thickness for carcase and shutters with 12mm thick back panel and drawer bottom. 2mm Edge banding matching the laminiate selected, Including all necessary fixing arrangement, glues, screws, magnetic catchers, handles, flush handles for drawer in wardrobe, hinges, telescopic sliding channel for drawers, as required. Colour may vary as per approval of engineer-in-charge. (B) MODULAR KITCHEN (i) Fabricating, Supplying, Installation, Fixing & Placing in position the entire Modular Kitchen Under Storage Counter (Height 850mm) as per drawing.The unit comprises of Cabinets, shutters, profile Handles, Accessories, Hardware, Glass etc,. Basic structural framing with 18mm thick prelam HDHMR for shutters and carcase and its divisions and 12 HDHMR for back panel and bottom panel of drawers as mentioned in the drawing, edge banding to match the color of selected laminate, including all necessary fixing arrangement, nails, glues, screws, magnetic catchers, handles, Handles of required lengths as per the width of the Drawer, Shutter, Cabinet, Soft Closing hinges and Soft Closing innotech sliding channel for drawers along with railings if required, fixing the furniture to the wall or to the floor as required. All works like fixing the unit to the floor or wall, laminates of specified thickness complete,other required hardware are included. Black Granite countertop, machine-cut, mirror polished, and neatly grouted, installed true to level with proper support structure.All framework intermittently for support and strength, All details to be followed as per the drawings and design provided and any addition required in detail should be incorporated in the shop drawing to ensure complete functionality and durability as intended. All HDHMR/Plywood and board will be both sides laminte. Nothing extra will be paid. All cooridnation works based on civil dimensions, integration of various appliances for the purpose of electrical wiring are to be considered in this item. Appliances like Chimney,sink etc to be paid seperatly. Natural stone counter top stone will be provided by the client and fixing will be done by the client appointed agency. However coordination will be the responsibility of this contractor.+B69(ii) Fabricating, Supplying, Installation, Fixing & Placing in position the entire Modular Kitchen Over Head Storage Counter (Height 600mm) as per drawing. The unit comprises of Cabinets, shutters, profile Handles, Accessories, Hardware, Glass etc,. Basic structural framing with 18mm thick prelam HDHMR for shutters and carcase and its divisions and 12 HDHMR for back panel and bottom panel of drawers as mentioned in the drawing, edge banding to match the color of selected laminate, including all necessary fixing arrangement, nails, glues, screws, magnetic catchers, handles, Handles of required lengths as per the width of the Drawer, Shutter, Cabinet, Soft Closing hinges and Soft Closing innotech sliding channel for drawers along with railings if required, fixing the furniture to the wall or to the floor as required. All works like fixing the unit to the floor or wall, laminates of specified thickness complete,other required hardware are included. All framework intermittently for support and strength, All details to be followed as per the drawings and design provided and any addition required in detail should be incorporated in the shop drawing to ensure complete functionality and durability as intended. All plywood and board will be both sides laminte. Nothing extra will be paid. All cooridnation works based on civil dimensions, integration of various appliances for the purpose of electrical wiring are to be considered in this item. Appliances like Chimney,sink etc to be paid seperatly. Natural stone counter top stone will be provided by the client and fixing will be done by the client appointed agency. However coordination will be the responsibility of this contractor. Colour may vary as per approval of Engineer-in-charge. GUEST HOUSE i) King Size BED: The king-size bed is constructed without a storage box and features robust materials for lasting durability. The frame, including the side panels and footboard, is made from 18 mm thick pre-laminated engineered wood with a melamine finish, offering a clean, wood-textured look. The mattress base is fabricated using 18 mm BWP-grade plywood, fully edge-banded to prevent warping and moisture damage. The overall dimensions of the bed are 2040 mm in length, 1980 mm in width, and 300 mm in height to the base, providing ample support for a standard king-size mattress (1980 mm × 1830 mm).The headboard stands 800 mm tall and is divided into two sections. The lower portion is made of laminated board, while the upper section includes a cushioned panel with 50 mm PU foam, upholstered in stitched premium leatherette for added comfort and aesthetics. The entire unit features a light oak melamine finish to match. The bed is supplied in knock-down condition with all necessary hardware, including cam locks, screws, dowels, and angle brackets. Assembly is straightforward with reinforced metal corners for added strength. ii) Side Table:The side table is constructed using high-grade plywood and finished in a light oak melamine laminate for a clean, natural appearance. It features a compact form with overall dimensions of 400 mm (width) × 400 mm (depth) × 490 mm (height). The unit has two lockable equally sized drawers, both equipped with soft-close telescopic channels for smooth, quiet operation.The design incorporates a handle-less front with a finger-pull recess at the top edge of each drawer for a sleek and minimalist look. Both drawers are lockable, enhancing functionality and security for personal storage. The surface is fully laminated for protection against wear and easy maintenance. iii) 06 Seater Dining Table— The dining table shall be of solid sheesham wood (kiln-dried and chemically treated) with overall dimensions 1500 mm × 900 mm × 760 mm and a tabletop thickness of approx. 25 mm; the apron shall be 25 mm thick and legs shall be 80–100 mm square in section, all joined using mortise-and-tenon or equivalent reinforced joinery. A clear tempered (toughened) glass top shall be provided to cover the wooden top: 10 mm clear toughened glass is recommended for this size, with machine-polished edges (flat polish or small bevel) and corner radii for safety. The glass shall be supplied cut to size for a nominal 2–3 mm reveal from the top edge of the apron (or as directed), packed separately and fitted on site. Glass fixing shall use non-marking neoprene/rubber support pads (minimum 6 pads per table) and anti-slip silicone adhesive/dots to hold the glass in place without damaging the wood; stainless steel decorative clamps may be provided where a visible fixing is required but should not bear the primary load. Finish of the wood shall be a low-sheen natural polish or clear lacquer; table shall be supplied knock-down with all required fasteners and instructions for on-site assembly and final glass placement. The glass top protects the wood from scratches, heat and spills, gives a sleek aesthetic, and makes cleaning easier (wipe with standard glass cleaner while avoiding aggressive solvents on adjacent wood finish).Chairs 06 Nos — Each chair shall be of solid sheesham wood, finished to match the table’s low-sheen polish, with a slatted backrest and straight legs. Seat height shall be 450 mm from finished floor level. Seats shall be cushioned with medium-density foam and fully upholstered in durable synthetic leather (leatherette) in a neutral tone; foam shall be supported on a plywood board beneath the cushion. Chair dimensions (seat width/depth/backrest height) and leg sections shall be robust to match the table and shall be supplied knock-down with necessary assembly hardware. Upholstery shall be stain-resistant and maintainable (spot cleanable); wood and upholstery care instructions shall be provided with each unit. (iv) SOFA SET (a)SOFA FOYER ONE SEATER Size in mm - 880(L) X 755(D) X 750(H) Seat Wooden Structure Uphostered With Leatherite & HD Foam 32 Softy. SS Chrome . Sofa S57 Max. Height 750mm . The rounded Armrests Provided Sleek And Stylish Look With The Pillowed Back . Arm Rest Leatherite Covered With Solid Wood Structure . Understructure Made By Solid Wood Structures With Heavy Quality Spring For Maximum Comfort , Taper Type 25mm Round Spiral Spring . Legs Round Pipe Chrome Plated Legs . Understructure Made of Base Frame Strongly Jointed Wooden Plywood Parts . 3 Seater Sofa Seat Height From Ground 460mm .3 Seater Sofa 2020W x 760D x 750H , 2 Seater Sofa 1450W x 760D x 750H . Seat Height From Ground 460mm & 1 Seater Sofa 880W x 760D x 750H . 100mm High Legs. (b)SOFA FOYER TWO SEATER Size in mm - 1460(L) X 755(D) X 750(H)Seat Wooden Structure Uphostered With Leatherite & HD Foam 32 Softy. SS Chrome . Sofa S57 Max. Height 750mm . The rounded Armrests Provided Sleek And Stylish Look With The Pillowed Back . Arm Rest Leatherite Covered With Solid Wood Structure . Understructure Made By Solid Wood Structures With Heavy Quality Spring For Maximum Comfort , Taper Type 25mm Round Spiral Spring . Legs Round Pipe Chrome Plated Legs . Understructure Made of Base Frame Strongly Jointed Wooden Plywood Parts . 3 Seater Sofa Seat Height From Ground 460mm .3 Seater Sofa 2020W x 760D x 750H , 2 Seater Sofa 1450W x 760D x 750H . Seat Height From Ground 460mm & 1 Seater Sofa 880W x 760D x 750H . 100mm High Legs. (c) Coffee Table The coffee table measures 900 mm (W) × 600 mm (D) × 450 mm (H) and features a 10 mm thick clear tempered glass top and shelf supported on a Stainless Steel 202 frame made of 40×40 mm square tubes with a mirror-polished finish. All joints are argon-welded, ground, and buffed for a seamless look. The lower glass shelf for additional storage, and rubber pads or level adjusters are provided at the base for stability and floor protection. The table combines modern design, durability, and elegant finish, making it ideal for offices and reception areas.

BRR:9701475 Bids Are invited for Cooling Device - Inverter Type, 1.5 Ton , Environmental Climate Control Sys - Pure Copper Condenser, 5 Star , Stabilizer - Digital Voltmeter Display , Table Glass - 8Mm Non Breakable , Table Top Gass - 10Mm Non Breakable Total Quantity : 5

BRR:9701376 Bids Are Invited For Procurement And Installation Of Main Notice Board Total Quantity : 1

BRR:9701150 Bids Are invited for White Metal Duty Board , Brass Frame Notice Board - Brass Frame Notice Board 5 Ft X 31 Inch (Writing Materials And Design As Per Buyer) , White Metal Key Box - White Metal Key Box 20 Inch X 30 Inch (Writing Materials And Design As Per Buyer) , White Metal Our Heros Board - White Metal Our Heros Board 6X3 Ft (Writing Materials And Design As Per Buyer) , White Metal Battle Honour Board - White Metal Battle Honour Board 96 X 30 Inch (Writing Materials And Design As Per Buyer) , Automatic Hand Dryer - Automatic Hand Dryer 01 Year Warrenty , Led Flood Light 100W - Led Flood Light 100W (06Xwarm White, 02Xred, 02Xgreen & 02Xyellow) 02 Yr Warrenty , Led Rope Light 50 Mtr - Led Rope Light 50 Mtr (02Xwarm White, 02Xred & 01X Green) 02 Yr Warrenty Total Quantity : 25

BRR:9701149 Bids Are invited for Brass Weapon Stand , White Metal Gallantry Awardees Board - White Metal Gallantry Awardees Board 38X42 Inch (Writing Materials And Design As Per Buyer) , Brass National And Regt Flag Pole Stand - Brass National And Regt Flag Pole Stand 15 Ft X 2 Inch (Writing Materials And Design As Per Buyer) , Stainless Steel Citation Boards - Stainless Steel Citation Boards 25 X 38 Inch (Writing Materials And Design As Per Buyer) , Bross On Steel Shooting Sixth Board - Bross On Steel Shooting Sixth Board 6 Ft X 15 Inch (Writing Materials And Design As Per Buyer) , Red Runner - Red Runner Length 45 Mtr And Width 3Ft , Smart Monitor With Smart Tv - Smart Monitor With Smart Tv 32 Inch , Led Pixel Strip Light - Led Pixel Strip Light 20 Mtr Mix Colour Total Quantity : 66

BRR:9701074 Bids Are Invited For A4 Size Paper , Envelope , Envelope A4 Size , Paper Photo Paper , Bond Paper , Spiral Bindling Ring , File Tag , Blue Ball Pen , Uniball Pen Blue , Uniball Pen Red , Uniball Pen Green , Eraser , Sharpener , Stapler Pin , Transparent Tape , Sketch Pen Black , Fevistick , Paper Flag , Highlighter , White Board Marker , White Board Marker Blue , White Board Marker Red , Cd Marker , Cd Marker Black , Correction Tape , A Battery , Aa Battery , Coin Cell , Ink Pad Blue , File Cover , Staple Gun Tacken , Talc Sheet , Binder Clip , Ring Binder File , Foam Tape , Stick Note Pad , Blade Cutter Paper , Df Ball Pen , Vello Gel Pen , U Clip , Drawing Sheet White , Drawing Sheet Pink Yellow , Stapler Pin Big , Plastic Stick File , Plastic Folder File , Register , Cash Book Ledger Total Quantity : 2041

BRR:9701052 Bids Are invited for Opc Drum , Blade , Charging Roller , Developer , Dram Gear , Charging Gear , Led Monitor , Dvd Writer , Smps Total Quantity : 24

BRR:9701049 Bids Are invited for Ups 1 Kva , Mouse Wired , Keyboard Wired , Led Monitor 24 Inch , Cpu I7 13Th Gen 16 Gb Ram 512 Gb Ssd With Win 11 Pro Ms Office 21 Pro , Pinter Laserjet Black And White 5000 Pages Duty Circle Comma 18 Ppm Total Quantity : 7

BRR:9701027 Bids Are invited for Charging Bulb 12 Watt , Drum 200 Ltr , Calling Bell , Holder , Invertor Bulb , Normal Bulb , Digital Clock , Register , Paper Pin , U Clip , Notice Board , Stapler , Invertor , Invertor Battery 150H Total Quantity : 56

BRR:9700992 Bids Are Invited For Interactive Panels With Cpu (Q2) , Antivirus Software (Q2) Total Quantity : 6

BRR:9700941 Bids Are invited for Soft Board 3X4 Feet , White Board 3X4 Feet , Ajanta Wall Clock , Table Cloth , Flex Board Star Media 2X3 Feet , Flex Board Star Media 3X4 Feet , Sa Firing Case Collector Total Quantity : 54

BRR:9700931 Bids Are Invited For Interactive Panels With Cpu Total Quantity : 12

BRR:9700709 Tender For Supply Of Stationery Items , Supply Of Stationery Items , Sealing Wax Red (Big Size) No. Of Sticks- 8 Gross Weight : 350 Grams , Stamp Pad (Big) Violet Size: 15.7Cm X 9.6 Cm , White Dustless Chalk Piece (10 Nos Of Sets) , Binding Gum Pocket (Each Pocket Net Weight : 500G) , Long Size Ruled Note - Binding (1 Quire Note) , Paper Tag File (Office File) Material : Cardboard Color : Multicolor Capacity : 100 Sheets Dimension : A4 , Folding File - Cobra File Material : Cardboard Color : Multicolor Style : Clip Application : Office , Wooden Office Writing Pad Size: 24X18inch (2X1.5 Feet) , Eraser Colour: White Material : Rubber Product Dimensions: 33L X 17W Millimeters Size : 20 Count (Pack Of 1 ) , Pencil Wooden (Extra Dark) - (0.3Mm) 22X3.8X1.6Cm Each Box : 10 Nos Pencils , Sharpener Each Box : 20 Nos , Stapler Machine (Medium) Size: No.10 , Stapler Pin Size: No.10-1M Each Box : 20 Nos , Stapler Machine (Big) Size: Hp-45 Type: All Metal Stapler , Stapler Pin (Big Size Stapler) Stapler Model : Hp-45 Each Box : 20 Nos , Cellotape (2 Inch) - White , Cellotape (2 Inch) - Brown , Scissor - Small Size:5 Inch, 125Mm , Scissor - Big Size-10 Inch , Fevistick (Big) Net Quantity : 25G , Fevigum (Small) Net Quantity : 50Ml , Paraffin Wax Candle Shape: Round Color: White Wax Type: Paraffin Wax Dimension: 30 Cm Height , Uniball Pen - ( Ub-157 Green) , Uniball Pen -(Ub-157 Light Blue) , Office Cover Brown (10*4.5 Inch) , Office Cover Brown (12*5 Inch) , Legal Size Clothline Cover - Green , A3 Size Clothline Cover - Green , Classic Cutter Size : 9Mm Handle : Plastic Grip Handle Blade: Steel Blade Material , Highlighter Size: 5.6 Inch Color: Yellow Material : Plastic , Wrapper Sheet (Kraft Paper) (Brown - Office Use) , Plastic Sticky Note - 4 Cut (Size:2X3) Different Colour , Sketch Pen Net Quantity : 1 Set (12 Colour) , Cotton Thread - Heavy Duty Cotton Thread Roll (Each Pocket 6 Tubes) Gross Weight : 125 Grams Each Tube Net Weight : 115 Grams Each Tube , Cellotape (3 Inch) - White , Cellotape (3 Inch) - Brown , Steel Scale Size: 12 Inch , Basic Calculator 12 Digit Two Way Powered (Solar + Battery) , File Tag Color: Multicolor Material : Cotton Size: 8 Inches Application : Office (Pocket Of 100 Nos) , Black Board Duster , Notice Board Pin Size: 26Mm , Jumbo Clip (Binder Clip) Size:1.25 Inch , Ruled Paper , Needle Size:3.5 Inch , Paper Weight Material : Glass Weight(Approx) : 150 Gram Please Enable Macros To View Boq Information

BRR:9700437 Tender for Water Supply Scheme Under Jal Jeevan Mission Scheme Within Ambassa Division During The Year 2025-26/Sh:Construction Of 02(Two) Nos Small Bore Deep Tube Well By Manual Means And Equipments Provided By The Contractor Including Installation Of Pump Set Electrical Panel Board To Be Installed In Ms(18Swg) Kiosk With 01 (One) Nos 15000 Gallon Capacity Clear Water Reservoir With Pump House, Pipeline Including 2500Gph Irp And Other Allied Works At Ananda Para Regrouping Of Chakma Vc Under Ganganagar Rd Block Within The Jurisdiction Of Dws Division Ambassa. (Scheme Id-8124801)

BRR:9700421 Tender for Water Supply Scheme In Manu Rd Block Under Ltv Division,Dhalai District,Tripura During The Year 2025-26 / Drilling & Development Of 01 (One) Nos. Small Bore Deep Tube Well (Sbdtw) At Manu Crossing Govt.Food Go-Down Under East Manu Vc,Longtarai Valley, Dhalai By Manual Means In/C Installation Of Pump Set, Electrical Panel Board To Be Install In M.S. (18 Swg) Kiosk, Commissioning Of The Tube Well In/C Domestic Connection Within The Area Of Manu Crossing Govt.Food Go-Down,Longtarai Valley .

BRR:9700053 Tender For Selection Of Agency For Restart And Comprehensive Maintenance And Operations Support For Itms For Jabalpur Smart City 2Nd Call - Switch -Cisco Catalyst 2960 L-series 3 Switch -Cisco Catalyst 3850 24X UPOE 4 Switch -Cisco Catalyst 9300 NM 8X 5 Firewall-Cisco ASA 5516-X 6 Server-Cisco UCS C240 M5 7 Storage-Huawei OceanStor 2200 V3 8 Router-Digisol DG-HR-3400 9 Router-AirtelXstream ZXHMF670L 10 Network Video Recordor-CP-UNR-4K4162-V2 11 Network Camera - Bullet-CP-UNC-TA20L3S-V2-0360 12 Network Camera - Dome-CP-UNC-DA20L3S-V2-0360 13 Workstation with 3 monitors-HP Z240 Tower Workstation 14 Printer-Xerox 7535 15 Printer-HP SNPRH-1504-01 16 Bio Metric-Realtime eco5 17 Bio Metric-ESSL Biometric 18 Video Wall-Delta VM-8350 DN CE 19 LED TV-LG 55SM5KD-B 20 Video Wall Switch-Tp-Link (10 Port ) Switch 21 UPS 10 KVA-Consul Neowatt 22 UPS IT 20 KVA-Consul Neowatt 23 Battery-Exide Powersafe Plus - EP 65-12 24 DVS Net viedo wall Control System-Delta VK- W001 CA 25 ITCS Server-DellLED E2221HN 26 ITCS Server-DellPrecision E-3640 27 EPABX-PanasonicKX-TES824BX 28 Rodent Controller(Transducer (Rodent)-VHFOV2 29 Fire safety System with Alarm-EN54-2,EN54-4 30 Category B - Field Infrastructure of Intelligent Traffic Management System (ITMS) 31 Overview Camera-Infinova VT211-A5-A 32 ANPR Camera with IR-Infinova VT210-A2-B0 33 PAwith Amplifier and Speakers -Ahuja 34 Traffic Signals with its all hardware, infrastructure and pedestrian feature in a junction -NA 35 CP PLUS VEHICAL DETECTOR -CP-UNC-TA21ZPL5-M-2812 36 Local Processing Unit -Vehant 37 Switch -CISCO1000 38 UPS 1 KVA-Consul Neowatt Power Solution 39 Batteries-Amaron/ Exide 40 VaMS -Novastar sensecure 41 Entire Integration of existing system including video feeds, e challan system with Police Department-NA 42 Category C - Connectivity 43 ITMS: Internet Leased line connectivity for Data Center & TCC & Network Upgradation .leaseline of 100 MBPSfor ITMS 44 Junctions: 100 MBPS or more as per actual requirement for data transmission to CCR (Video feeds, etc)-Unit Rate per Location 45 SVD and Entry & Exit Junctions: 100 MBPS or more as per actual requirement for data transmission to CCR (Video feeds, etc)-Unit Rate per Location 46 Annual Charges-Telephone Line-Unit Rate per Telephone Line 47 Category D - Connectivity 48 E-Challan Printing, Processing, Sorting, making Entry and insertion in the Envelope for Dispatch-On actuals 49 E-Challan Delivery Charges by Hand/Post/ Courier (Per E-Challan)-On actuals 50 CategoryE- Manpower 51 Technicians (Field work of ITMS) 52 Technician (Electrician) 53 Operator 54 Floor Incharge 55 Housekeeping

BRR:9699901 Supply Of Furniture And Equipments. , Supply Of Furniture And Equipments. , Dining Table : - Providing & Supplying Of Dining Table Of Size 4’ × 2’, Made Up Of Original Onyx Marble Top And Teak Wood Base. , Chair. :- Providing & Supplying Of Chairs With Water-Resistant Washable Fabric And Cushion Of Approved Brand (D-Decor Make). , Coffee Machine : – Providing & Supplying Of Espresso Coffee Machine, Big. , Wooden Almirah : – Providing & Supplying Of Wooden Almirah Of Size 7’ × 6’ × 2’, Made Up Of 19 Mm Green Ply Board With Mica Finish. , Wooden Almirah : – Providing & Supplying Of Wooden Almirah Of Size 3’ × 5’6” × 2’, Made Up Of 19 Mm Green Ply Board With Mica Finish. , Wooden Almirah : – Providing & Supplying Of Wooden Almirah Of Size 7’ × 5’ × 2’, Made Up Of 19 Mm Green Ply Board With Mica Finish. , Wooden Almirah : – Providing & Supplying Of Wooden Almirah Of Size 3’4” × 7’6” × 2’, Made Up Of 19 Mm Green Ply Board With Mica Finish. , Wooden Almirah : – Providing & Supplying Of Wooden Almirah Of Size 5’ × 3’ × 2’, Made Up Of 19 Mm Green Ply Board With Mica Finish. , Wooden Table :– Providing & Supplying Of Wooden Table Made Up Of 19 Mm Green Ply Board With Mica Finish, Of Size 4’ × 2’6” × 2’9”. , Display Counter : – Providing & Supplying Of Led Display Counter With Metal Body And Glass, Having Hot And Cold Function. , Cash Counter (Wooden) : – Providing & Supplying Of Cash Counter Made Up Of 19 Mm Green Ply Board With Mica Finish, Of Size 2’6” × 2’. , Chest Freezer (Convertible) :– Providing & Supplying Of Commercial Chest Freezer (Convertible Type), Big Size. , Wet Grinder Motor :– Providing & Supplying Of Wet Grinder Suitable For Wet Cereals And Wet Paste, With Heavy-Duty Motor. , Steel & Aluminium Partition : – Providing & Supplying Of Steel And Aluminium Operable Partition Of Size 12’ × 12’, With Glass Panels And Solar Film. , Office Table :– Providing & Supplying Of Office Table Made Up Of Wood, Of Size 5’ × 2’6”. , Counter Chair : – Providing & Supplying Of High-Height Counter Chair Made Up Of Teak Wood. , Customized Wooden Partition : – Providing & Supplying Of Customized Wooden Partition Made Up Of Teak Wood, Of Size 6’ × 3’. , Cnc Cut Wall Sheets :– Providing & Supplying Of Cnc Cut Wall Sheets Made Up Of Teak Wood, With Matt Finish. , Vanity Cabin :– Providing & Supplying Of Sleek Vanity Cabin Of Size 4’ × 2’, With Looking Mirror And Stone Counter Top. , Sink Faucets : – Providing & Supplying Of Advanced Sink Faucets With Pullout Technology And Three Spray Options.

BRR:9699170 Tender For Special Repairs To Bldg No P-16, P-17 And P-199 At Pao Quarters, S Of A, Under Ge Devlali; 1 Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stone work and precast concrete articles complete all as specified and as directed. 2 M&L for Brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed. 3 All as per item No.02 above but except burnt bricks. 4 Taking down cement plaster any description on brick or stone cement concrete surfeaces/walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed. 5 M & L 10 mm thick rendering in cement mortar 1:6 on brick work or stone masonry/concrete /RCC surfaces rendering is to be finished even and smooth without using extra cement complete all as spd and directed at any height. 6 M&L for 1.5mm thick wall care putty on wall complete all as specified and as directed incl sanding rubbing for smoothness of surfaces. 7 M&L for rendering 15mm thick in cement mortar 1:4on brick work or stone masonry/concrete /RCC surfaces rendering is to be finished even and smooth without using extra cement complete all as spd and directed at any height. 8 M&L for rendering 5mm thick in cement mortor 1 :3 as in ceilingplaster on concrete surfaces,rendering is to be finished even and smooth without using extra cement complete all as spd and directed at any height. complete all as specified and as directed. 9 M&L for preparing new plastered or unplastered surfaces of ceiling, and applying three coats of white wash complete all as specified and directed. 10 M&L for preparing new plastered or unplastered surfaces of walls, and applying three coats of white wash complete all as specified and directed. 11 M&L for preparing new plastered or unplastered surfaces of walls, and applying two coats of oil emulsion distemper over a coat of interior wall primer complete all as specified and directed. 12 Demolition of stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and as as directed. 13 M&L for joint free coloured glazed ceramic tiles in vertical surface of size 300X 600X7 to 8 mm thick of different shade colour and pattern as approved, over and including 10 mm thick rendering in CM 1:4 as backing coat finished to receive wall tiles, set and jointed in neat cement slurry and pointed in white or colour cement to matchetc complete all as directed and specified. 14 M&L Vitrified tiles 8- 9 mm thick (square/rectangular) polished, area of each tilesexceeding 0.42 Sqm but not exceeding 1.00 Sqm, in floors including screed bed 15mm thick in cement mortar 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. 15 All as per Sl item No 14 above but in skirting over 10mm thick backing coat in cement mortar (1:4) complete all as specified and directed. 16 M&L for non skidjoint free ceramic tiles (of size 7 to 8mm thick (coloured) (Square/rectangular) area of each tile exc 0.06 but n exc 0.18 sqm, in floors, set & jointed in neatcement slurry and pointed in coloured cement over 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed. 17 M&L for Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab inclunding rubbing and polishing completeincluding screed bed 15mm thick in cement mortar (1:6) complete all as specified and as directed. 18 All as per item No 17 above,but as in skirtingover 10mm thick backing coat in CM (1:4). 19 M&L machine cut cudappa stone slab 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. 20 M&L for Granite (of any type) 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting andpolishing types including 15mm thick screed bed in cement mortar (1:6), complete all as specified and as directed. 21 M&L for Machine cut kota stone slab on steps as inriser/tradein single piece of any size 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab inclunding rubbing and polishing complete including screed bed 15mm thick in cement mortar (1:6) complete all as specified and as directed. 22 M&L for green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including 15mm thick screed bed in cement mortar (1:6), complete all as specified and as directed by Engineer-in-charge. 23 Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed. 24 M&L for chequered cement concrete tiles 30cm x30cmx 20mm thick Rubber moulded with grey cementandpigment, over and including 15mm thick screed in cement mortar (1:6), set jointed & pointed in neat cement slurry in floors complete all as specified and as directed. 25 M&L for precast cement concrete interlocking tiles 60mm thick Rubber moulded with strength 30 N/sqmm as in floor/pavement laid on 30 mm thick stone dust cushioning laid dry to the profile complete all as specified and as directed. 26 Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed. 27 M&L for 30mm thick PCC (1:2:4) Type B1 with 20mm graded stone aggregate as in levelling course as in floor complete all as specified and as directed. 28 M&L for cement concrete (1:4:8) type D 2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and as directed. 29 M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection including making joint at every 3mtr interval and and corner finished even and fair and laid in alternate bays complete all as specified and directed. 30 Taking down carefully existingunserviceable bitumen felt/ APP membrane including plaster (any number of layers ofanythickness) etc and removing of the rubbish to a distance not exceeding500m from the building and depositing where directed complete all as spd and directed. 31 M&L for rendering 10 mm thick cementplaster in cement mortar 1:4 on RCC/concreteroof/terrace surfaces mixed with water proofing liquid complete all as specified and as directed. Note: Water Proofing liquid shall be measured and paid separately. 32 M&L for providing plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) for filleting, benching,coving of chajjah top/junctions, padding concrete below roof treatment etcslightly rounded or chamfered on edges wherever required includingnecessary form work/moulds etcincluding applying cement slurry on surface area @2.50 Kg/Sqm completeall as specified andas directed . 33 M&L for cleaning the newly plastered surfaces of concrete (roof etc) with wire brushes and applying water proofing treatment as under :-i) Apply one coat of oil bound bituminous primer @ 0.25 kg/Sqm.ii) Providing and laying3 mm thick APP modified water proofing membrane weighing not less than 3.5 Kg/Sqm reinforced with non woven polyester mat weighing not less than 160 gm/Sqm all as specified procured from any one of the approved manufacturers.iii)Apply one coat of solar reflective bituminous aluminium paint @ 0.15 Kg/Sqm over membrane over non assesible roof surfaces complete all as per manufacturers instructions and as directed . 34 Demolition of RCC cement concrete (reinforced) in roofs, floors(other than ground floors), beams staircases, landing, chajjas, and similar suspended work. 35 M&L for RCC (nominal mix) Type B1 1:2:4 (20 mm graded aggregate) in chajjas. 36 Formwork to chullah hoods, chajjas, troughs and similar items including edges, flat rough finished surfaces of concrete 37 M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. 38 All as per item No. 37 above but 6mm to 8mm dia. 39 Taking down chowkats or frames with shutters (without taking off shutters from the frames) n exc 1.5 sq. m each complete all as specified and directed. 40 Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.5 sq. m but n exc 4 sq m each complete all as specified and directed. 41 S&F for Factory made single extruded WPC (Wood Polymer composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x125 mm double rebate comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madeMake : ECHON/Sintex/Rajshree/Navaratan Note : Rate of MS hold fast/Fasteners/SS Dash fastener deemed to be included in quoted rates . 42 S&F for 35mm thickfactory made flush door shutter, solid core construction, with particle board core and plywood face panels ,commercial type on both faces including teak wood beading 6mm thick all around complete all as specified and as directed. 43 S&F 2nd class H.W. glazed & skeletonshutter 35mm thick factory madeopen rebated & prepared to receive glass gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass,gauge etc size of members of shutter as specified in SSR part-I , section 8, clause 8.24 (a) complete all as specified and as directed. 44 Supply for Pipe Supporting Clamping - Single Pipe of PVC dia 75 mm (3) down take pipe fixing done with Clamping System consists of Profile Bracket + Continuous Slotted C Channel + U Bolt Rubber Sleeve mounted System running vertically with wall distance100 mm (4):Pipe Support Clamping made of : 1. Profile Bracket having Wall Distance 100 mm (4) made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923.2. Continuous Slotted C Channel with ribs to be used of size 250 mm (10) made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079) are Hot Dip Galvanzied+ Zn Al Flake coated with material thickness of 3mm.(Contd/...) 45 Item No 44 Contd/...3. U bolt Rubber Sleeve mounted are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated.Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 used as per MTC confirms to EN 10204 3.1. Material Qty. for one unit : 1. Profile Bracket Wall distance 75 mm (3) - 2 Nos. 2. Continuous Slotted C Channel of Size 250 mm (10) - 1 No.; 3. U Bolt Rubber Sleeve mounted for 75 mm (3)PVC Pipe Dia. - 1 No.; and 4. Fixing Nail Zn coated of thickness 6.5 mm and length 63 mm (2 1/2) - 4 nos. Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in Chief Engineer Pune Zone Technical Drawing (TD) of Factory Made Pipe Supporting System : CEPZ/2023/TD/03 and CEPZ/2024/01.Make: Shaivi or equivalent as approved by GE. 46 Dismantling of boarding any description fixed in any position with nails complete all as specified and as directed 47 M&L for preparation of new untreated wood and wood based surfaces of any description, not otherwise, described, over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. 48 M&L for preparation of new untreated steel or iron surfaces of any description, not otherwise, described, over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. 49 S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x100 mm single rebate comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be pincl in quoted rate).Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Make : ECHON/Sintex/Rajshree/NavaratanRate of MS hold fast/Fasteners/SS Dash fastener deemed to be included in quoted rates . 50 S&F 30 mm thick moulded Prelaminatedboth side WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on front side with wood grain texture on front and plain on back side with density not less than 600 Kg/cum.Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fireretardant and having screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50N/ mm2, modulus of elasticity 850N /MM2 and resistance to spread of flame of Class A category with property of being termite/ bore proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S. screws, all as per direction of Engineer-in-Charge. (Note : Stainless steel butt hinges and necessary SS screws shall be paid separately) . 51 M & Lfor fabrication & fixing tohorizontal & vertical shelves/ partations /sides/ top/ bottom/back sides etc forModular kitchen cabinate/ wardrobe/ cupboard/drawers made out of 18mm thick HDHMR boards (Water/termite proof) with white laminated colour on both sides, of approved qualityincluding paste to all exposed edge byedge Binding Tape to match the colour of boardincluding provision of cabinet for keeping baskets/ drawers etc andincluding taking down existing shutter/panel/partition and all other accessories in any type and any position complete all as specified and as directed. (Make :Action tesa/kitply or Archid) 52 M & Lfor Fabrication & fixing to front side /all exposed sides ofModular kitchen cabinate/ wardrobe/ cupboard/drawers made out of 18mm thick HDHMR UV, glossy/maat finish boards front side and other side white UV boards edges duly bonded with PVC taping to match the colour of UV boards all around including provision of cabinet for keeping baskets/ drawers etc andincluding taking down existing shutter/panel/partition and all other accessories in any type and any position complete all as specified and as directed. (Make :Action tesa/kitply or Archid) 53 S&F powder coated sliding window, three trackshutters with sash bars, locking rails, locking arrangements including necessay joinery cleats, glazing clips, rubber packing, chowkats aluminium snap beading, screws, suitable handle etc with and including sheet glass of 4mm thick black tinted and stainless steel wire loth 0.36mm nominal dia of wire andaverage width of aperature 1.40mm, size ofside rails, top rails , bottom rail 30x10mm and size of three track chowkat frame 90 x 30mm and thickness of aluminium member shall be 1.40mm thick complete all as specified in MES SSR, Part-I clause 10.37complete all as specified and as directed. 54 S&F for powder coated aluminium ventilator shutters with frame not less than 0.55Kg/Rm, half bottom portion fixed with 4mm thick glass with fixed type shutter and top half portion lower type with 4mm thick frostedglass and outer side fixed with stainless steel wire mesh, shutters aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary aluminium fittings etc complete all as specified and directed. 55 S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0all as specified and as directed. 56 S&F stainless steel wire cloth 0.36mm nominal dia of wire andaverage width of aperture 1.40mm and fixed with stainless steel wire stapples complete all as specified and as directed. and directed. 57 S&F hasp and staple aluminium anodished safety type with mild steel hinges pin incl bolt to hinge plate and fixed with screw 125mm size. 58 S&F for door/shutter ball catches with 8 mm dia steel ball and brass body and striking plate incl magnetic with striking plate for WPCcabinets, cupboard shutters complete all as specified. 59 S&F 100mm long butt hinges stainless steel complete fixed with full body threaded Star headed counter sunk SS screws all as specified and as directed. 60 S&F 140 mm aluminium floor door stoppers double legged with hard drawn steel spring fitted in floor complete all as specified and as directed. 61 S&F 150mm long Aluminium anodizes barrel tower bolts of extruded section complete all as specified and as directed. 62 S&F continuous (piano) hinges, stainlesssteel, bright finishedwith 30 mm flaps handle complete all as specified and as directed. 63 S&F 150mm size aluminium anodized handle complete all as specified and as directed. 64 M&L for 300mm long aluminium alloy anodized sliding door bolts with Hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed. 65 S&F in repair 25 mm dia and 1 to 1.50 mm thick stainless steel curtain rodincluding stainless steel brackets, stops, end knobs/ side globe, wall to wall bracket ect. complete all as specified and directed by Engr-in-charge. 66 S&F in repair PVC cabinet 450x600mm overall size with looking mirror of selected qality 5mm thick glass mounted over PVC framingcomplete all as specified of Make Prayag/Polytuf/Somany 67 Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed. 68 S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed. 69 S&F in repairs stainless steel plate rackof size not less than 90cmx75cm fixed with stainless steel screw including taking out old unserviceable wooden plate rack as approved by GE complete all as specified. 70 S&F in repairs glazed earthen ware viterous china wash down water closet (pedestal pattern) white coloured with and including plastic water closed seat, white, closed pattern with recessed bottom, and cover and mild steel chromium plated hinging device etccomplete all as directed. Make somany Cat Part No. SMART EWC P or Equivelent in Cera/Hindware/Parryware. 71 S&F in rep vitreous china squatting Pan “Orissa” Pattern, of size 580mm x 440mm white with integral foot rests and trap (excluding flushing cistern and flush pipe) including provn of cement concrete bedding complete asfixed complete all as specified. 72 S&F in repairs glazed earthen ware viterous china wash basin white coloured (flat back or angle back type), size 550x400 mm and including CI brackets, outlet of 32 mm bore HDPE outlet pipe with necessary fittings, 32 mm bore brass CP waste couplings and bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed etc complete all as directed. 73 S & F in repair 15 mm bore, fancy type, bib taps, long body, cast copper alloy, 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engr-in-Charge. Make : Cat Part No FLR- 5047 N of Jaquar or equivalent in kohlar, grohe and Roca 74 S & F in repair 15 mm bore, fancy type, angular valve, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed by Engr-in-Charge. Make : Cat Part NoFLR-5053 N of Jaquar or equivalent in kohlar, grohe and Roca 75 S&F for 15mm bore, 450mm long, PVC connections with brass unions internally threaded both ends complete fixed to iron pipe at both ends as fixed in repairs complete all as specified and as directed.. 76 S&Fin repair Health Faucet (ABS Body) with 1.20 M Long PVC Tube and wall Hook screwed down to GI pipe or union/angle valve complete all as specified and directed by Engr-in-charge Make Jaquar Code No- ALD-CHR-583 or equivalent in kohlar, grohe and Roca 77 S & F in repair CP, soap dishcomplete all as specified and as directed by Engr-in-Charge. Make Jaquar Code No- AKP -35731 P or equivalent in kohlar, grohe and Roca 78 S&F in repair fancy type Toilet paper holder, steel chromium plated approximate size 140X140X50mm complete all as specified and as directed. 79 S&F in repair Overhead Shower 120mm round shape, Single Flow (Face Plate Stainless Steel and ABS body with Chrome Finish) with Rubit Cleaning System including shower arm of size 190mm long flat shape for wall mounted shower with flenge complete all as specified and directed. Make Jaquar Cat Part No. OHS-1663 & SHA483 or equivalent in kohar, grohe and Roca. 80 S&F sheet glass corner wall mounted shelf assembly consisting of 8mm thick sheet glass 220mmX220mm size with chromium plated bracket guard and railing 50mm high complete all as specified and as directed. 81 S&F in repair brass chromium plated Tubular towel rail 20mm dia, D type, 60cm long between flanges. 82 S&F in repairs 15mm bore CP Sink mixer with regular swinging spout (Wall mounted model) with connecting legs and wall flenge complete all as specified and as directed. Make Jaquar Cat Part No. FLR-5309N or equivalent in kohar, grohe and Roca. 83 S & F in repair for 15 mm bore, fancy type, Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange and including Telephone Shower complete all as specified and as directed by Engr-in-Charge Make Jaguar Cat Part No: FLR-5281N, Hand shower HSH 1715, flexible tube SHA-549D12or equivalent in kohlar, grohe and Roca. 84 S&F in repair 15mm dia brass chromium plated two waybib cock with long flange screwed down for 15 mm dia bore GI Pipe complete all as specified and directed. Make Jaguar Cat Part No: FLR 5041 Nor equivalent in kohlar, grohe and Roca . 85 S&F in repair PVC valveless flushing cistern, low level white with inlet ball valve float and handle including brackets complete fixed capacity of flush 10 ltrs complete all as specified and as directed. 86 Dismantling/Disconnectingof water tanks (RCC hume Pipe/PVC)including disconnecting all connections etc 1000 ltrs capacity. complete for following capacity of tanks . 87 Refixing the old rotational moulded polythylene water storage tank 1000 ltrs capacity (cylindrical/vertical with closte top) hoisted and fixed in position all as specified in SSR Part-Iincluding providing and fixing ball valve high pressure with polythene float and fly nut, 20mm bore complete for following capacity of tanks. 88 S&Fnew rotational moulded polythylene water storage tank 1000 ltrs capacity (cylindrical/vertical with closte top) hoisted and fixed in position all as specified in SSR Part-Iincluding providing and fixing ball brass valve high pressure with polythene float and fly nut, 20mm bore complete for following capacity of tanks. 89 Dismantling/Disconnecting of water tanks (RCC hume Pipe/PVC)including disconnecting all connections exc 250 and n exc 500 ltrs capacity. complete for following capacity of tanks . 90 S&Fnew rotational moulded polythylene water storage tank 500 ltrs capacity (cylindrical/vertical with closte top) hoisted and fixed in position all as specified in SSR Part-Iincluding providing and fixing ball brass valve high pressure with polythene float and fly nut, 20mm bore complete for following capacity of tanks 91 S & F 16mm dia (internal dia) CPVC pipes with all fittings SDR 11 & Plain CPVC SDR 11fixedto walls and ceilings with adequate nos of clamps or laid in floors including cutting chases in stone,concrete block or slab wall pinning in making good to facing where ever required to the sufraces for concelled water supply including CPVC brass fitting such as elbow, socket, nipple required for fixing of plumbing items complete all as specified and as directed. (Note : No extra payment shall be made for cutting chases & CPVC fittings) 92 S & F 25mm dia (internal dia) CPVC pipes with all fittings SDR 11 & Plain CPVC SDR 11fixedto walls and ceilings with adequate nos of clamps or laid in floors including cutting chases in stone,concrete block or slab wall pinning in making good to facing where ever required to the sufraces for concelled water supply including CPVC brass fitting such as elbow, socket, nipple required for fixing of plumbing items complete all as specified and as directed. (Note : No extra payment shall be made for cutting chases & CPVC fittings) 93 Taking up or down 15mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed. 94 Taking up or down 20mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed. 95 Cutting chases in Stone, concrete block or slab walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth all as specified and as directed. 96 S&F in repairs 25mm bore CPVC gate valves screwd both ends for CPVC pipescomplete all as specified and directed. 97 Taking down of PVC Pipes with fittings upto 75mm to 110mm dia/eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks,etc.,complete all as specified and as directed. 98 S&F for 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall with clamp complete all as specified and as directed. 99 All as per item No 97 but except pipe complete all as specified and directed. 100 S&F for 75mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall with clamp complete all as specified and as directed. 101 All as per item No 99 but except pipe complete all as specified and directed 102 S&F PVC (SWR) bend with access door any radius 110mmcomplete all as specified and directed. 103 S&F PVC (SWR) bend any radius 110mmcomplete all as specified and directed. 104 S&F PVC (SWR) bend with access door any radius 75mm complete all as specified and directed. 105 S&F PVC (SWR) bendany radius 75mm complete all as specified and directed. 106 S&F forn110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed. 107 S&F for 75mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed. 108 S&F 110 mm PVC (SWR) junction single T equal or unequal complete all asspecified and directed . 109 S&F 75 mm PVC (SWR) junction single T equal or unequal complete all asspecified and directed . 110 S&F 75 mm PVC (SWR) vent cowl complete all asspecified and directed . 111 S&F 100 mm PVC (SWR) vent cowl complete all asspecified and directed . 112 S&F in repairs 75 mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed. 113 Complete removal of existing treatment and applying three coats of white wash on surfaces of ceiling, including removal of unnecessary nails and filling of holes/cracks by crack filler, complete all as specified and directed. 114 Complete removal of existing treatment and applying two coats of white wash on surfaces of walls, including removal of unnecessary nails and filling of holes/cracks by crack filler, complete all as specified and directed. 115 Complete removal of existing treatment and applying two coats of oil emulsion distempering over a coat of interior wall primer over 1.5mm thick wall care putty, including removal of unnecessary nails and filling of holes/cracks by crack filler on surfaces of walls, complete all as specified and directed. 116 M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand: 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified (Payment for providing grooves shall be made separately). 117 S & F and Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using aluminium U channel of size 15 mm x 15 mm and 1.40 mm thick and fixed on wall , with screw to the under layer , repair to the edges of panels and finishing the aluminium U channel while cement is green complete all as per specifications and direction of the Engineer-in-charge. 118 Supply for Pipe Supporting Clamping - Single Pipe of dia 20 mm (3/4) down take pipeline fixing done with Clamping System consists of Mono Bracket + U Bolt Rubber Sleeve mounted system running vertically with wall distance 100 mm (4):Pipe Support Clamping made of: 1. Mono Bracket for 20 mm (3/4) pipe having Wall Distance 100 mm (4) made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079); material size 48 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result 2000 hrs.2. U bolt Rubber Sleeve mounted are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set - Zn Al Flake coated.Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns).Material Grade : IS 1079 used as per MTC confirms to EN 10204 3.1. Material Qty. for one unit: 1. Mono Bracket for 20 mm (3/4) pipe, Wall distance 75 mm (3) - 1 Nos. 2. U Bol Rubber Sleeve mounted for 20 mm (3/4) GI / UPVC/ CPVC pipe Dia. - 1 nos and 3. Fixing Nail Zn coated of thickness 6.5 mm and length 63 mm (2 1/2) - 2 nos. Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in Chief Engineer Pune Zone Technical Drawing (TD) of Factory Made Pipe Supporting System : CEPZ/2023/TD/03 and CEPZ/2024/01.Make : Shaivi or equivalent as approved by GE. 119 Supply of Pipe Supporting Clamping System having Profile Bracket+ Slotted C Channel + U Bolt System for Five Pipelines (110mm + 75mm + 25mm + 20mm + 15mm) running Vertical Fixed line with wall distance 4 (100 mm):Pipe Support Clamping made of:1. Profile Bracket Wall Distance 100 mm (4) made of Low Carbon Hot Roll gauge corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923.2. Slotted C Channel B3 Type to be used of size 712mm (28) (Continuous Slotted C Channel with ribs) made of Low Carbon Hot Roll gauge corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079) are Hot Dip Galvanzied + Zn Al Flake coated with material thickness of 3mm. (Contd/...) 120 Item No 118 Contd/...3. U bolt Rubber Sleeve mounted are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 Hotdip Galvanizing: As per x 18 x 8 x 13 with Serration set as per DIN 6923-Zn Al Flake coated.Material Grade: IS 1079 used as per MTC IS 2629 (1985)-610 grams/m2 (>85 microns). confirms to EN 10204 3.1.Material Quantity for one unit: 1. Profile Bracket of Wall distance 3 (75 mm)-2 Nos. 2. Slotted C Channel of Size 28(712mm) - 1 No.; 3. U Bolt Rubber mounted for 4 (110 mm) Pvc pipe Dia. -1 nos. ; 4. U Bolt Rubber mounted for 3/4 (20mm) Pvc Pipe Dia -1 nos.; U Bolt Rubber mounted for 1/2(15mm) Pvc Pipe Dia -1 nos.; U Bolt Rubber mounted for 3(75mm) Pvc Pipe Dia -1 nos. ; U Bolt Rubber mounted for 1(25mm) Pvc Pipe Dia -1 nos. ;5. Fixing Nail thickness 6.5 mm approx and length 62 mm (2 1/2) Zn coated-4 nos. Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in Chief Engineer Pune Zone Technical Drawing (TD) of Factory Made Pipe Supporting System : CEPZ/2023/TD/03 and CEPZ/2024/01.Make: Shaivi or equivalent as approved by GE. 121 Supply only integral liquid water proofing compound complete all as specified & as directed by Engineer-in-Charge. Make : Pidilite/Sika 122 M&L for special treatment to floor/wall sunken portion with demolition of PCC with plaster of entire sunken area (bottom & sides upto dado level) including removal of demolished material exc 250m and n exc 500m, prepration of surface by cleaning to remove loose particles, dust, latance etc, replacement of floor trap of PVC SWR 100 mm boreand applying 10mm thick plaster in CM (1:4) with WPC liquid Conplast 421,and applying one coat each of Nitoproof 100 priming coat@1Ltr/5Sqm, after the priming coat applying Nitoproof 120 on plastered surfaces @1Ltr/2.5Sqm, filling the sunken floor with PCC (1:5:10) using brick bat and WPC Conplast - 421, rendering again 40mm thick in CM (1:4) mixed withWPC Conplast - 421, area offloor/kitchen/toilet/bathupto 3..00 Sqm complete all as specified and as directed. 123 S&F LDPE pipe 40mmbore fixed to wall/ceiling with bends/elbow complete all as specified. 124 S&F in repair mild steel ordinary rat tail rod pattern spring 300mm size including roller & roller plate and incl welding complete all as specified and as directed. 125 M&L for cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in concrete bed to 150mm bore drain pipes including packing under & haunching against the sides of pipes after they are laid & tested for 150mm bore pipe including demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement concrete mortar complete all as specified and as directed. 126 M&L for 150 mm bore PVC SWR drain pipe laid in floor or in trenches incl connecting with solvent cement and jointing complete with socket , complete all as specified and as directed. 127 M&L for precast cement concrete 1:2:4 type B-1 using (20mm aggreates) set in CM (1:4) as in cover slabs (for manhole etc) & simillar articles with plain faces complete (Reinforcement will be measured and paid separatly)all as specified and directed. 128 Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out hard/dense soil. 129 Returning, filling in including spreading, levelling, watering & well ramming in layers n.exc 25cm. 130 Removing excavated material (surplus soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed by Engineer-in-charge. 131 S&F Stainless steel Z type hinges 75 mm longmedium weight fixed with SS star headed screw complete all as spd and directed as in Kitchen cabinet cupboardshutters all as spd and directed. 132 S&F auto closing hinges 35 mm of 0 crank( KH-001) OR 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters Make :Hexa, Hettich, Hafele 133 S&F Ball bearing runners 45 mm Telescopic channel (KTS-20) full extension load capacity 50 kgs, Make :Hexa, Hettich, Hafele 134 S&F chrome plated stainless steel wire basket (storage basket) pull out type for large utensils, size 480 x 500 x 150 mm of Grade 304 with necessary fixing clips etc. complete in all respect as specified and as directed by Engineer- in – charge.Make :Hettich, Hafele, Butterfly 135 S&F chrome plated stainless steel wire basket (cup and saucer basket) pull out type, size 380 x 500 x 100 mm Grade 304with necessary fixing clips etc. complete in all respect as specified and as directed by engineer- in – charge.Make :Hettich, Hafele, Butterfly 136 S&F chrome plated stainless steel wire basket (plate basket) pull out type, size 380 x 500 x 100 mm Grade 304with necessary fixing clips etc. complete in all respect as specified and as directed by Engineer-in–charge. Make :Hettich, Hafele, Butterfly 137 S&F chrome plated stainless steel wire basket (cutlery basket) pull out type, size 380 x 500 x 100 mm Grade 304with necessary fixing clips etc. complete in all respect as specified and as directed by engineer- in – charge.Make : Hettich, Hafele, Butterfly 138 S&F chrome plated stainless steel wire basket (Grain Trolley) pull out type, size 480 x 500 x 200 mm Grade 304with necessary slidingchannel frame structure, fixing clips etc. complete in all respect as specified and as directed by Engineer- in - charge. Make : Hettich, Hafele, Butterfly 139 Supply chrome plated stainless steel wire basket (Bottle pull out) pull out type two self, size 120 x 500 x 432 mm with necessary sliding channel frame structure, fixing clips etc. complete in all respect as specified and as directed by Engineer- in – charge.” Make : Hettich, Hafele, Butterfly 140 S&F in repairs 15mm bore CP central hole basin mixer with regular spout without popup waste system with 450mm long braided hoses, 20mm Cartridge size complete all as specified and as directed. Make Jaquar Cat Part No. FLR-5167NB or equivalent in kohar, grohe and Roca. 141 S&F 100 mm long extruded brass handles, fabricated type polished for modular kitchen as specified and directed. 142 Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridges etc complete all as specified and directed. 143 S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steelsheet 0.50 mm thick of Red colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screwscomplete all as specified and as directed. 144 S&F Pre-painted galvalume aluminium zinc coating GI based plain steelsheet 0.50 mm thick of Red colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screwscomplete all as specified and as directed. 145 S&F steel work (tubular/hollow) in trusses, rafters, beams, purlins etc, including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and as as directed. 146 M&L for providing and fixing in repair Stainless steel (Grade 304)railing made of hollow tubes, channels, plates etc. , including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasterners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangemnet and its components including levelling, grouting, providing holes as required for services etc. complete all as specified and direction of Engineer-in-Charge. 147 S & F powder coated aluminium sections for doors, windows, partition including fabrication of frame and shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc. including all accessories such as glazings clips, provn of AC opening and rubber beadings for fixing glass panes in frame complete all as specified by Engr-In- Charge. Note : (i) Glass panes/wire cloth will be measured & paid separately . (ii)The quoted rate shall be inclusive of cost of rubber beading and glazing clips,hinges, handle. However it will be not be weighed and not paid separately.(iii) All other minor details including cost of locking arrangement shall be included in the quoted rate.Make : Hindalco/Indal (Indian Al Coy)/Jindal/Associated Profile & Aluminium Ltd/Ajit India 148 S&F 4.80 mm thick black tinted glassof any size in each pane complete all as specified and directed 149 Taking down copper/aluminium point wiring(light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. 150 Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth 151 M&L Point wiring with two single core, 1.5 sqmm (nominal area) size multistranded copper conductor cableand one single core 1.5 sqmmsizecopper conductor cable as earth continuity conductor connected to common earth dolly,1100 volts grade , FRLS, PVC insulated unsheathed cable in and including PVC rigid conduit of suitable size, duly concealed in wall, floor, ceiling etc, including provision of mild steel modular type terminal boxes of suitable module made with mild steel sheet duly galvanised and suitable for fixing modular type switches / sockets / regulators / AC starters etc.fixed in recess of wall with brass chromium plated screws and cap washer complete for the following:-(a) 152 One light point/ exhaust fan point controlled by one switch 153 One fan point controlled by one switch 154 One 5 pin socket outlet. 5 Amps on the same board. 155 One 5 pin socket outlet. 5 Amps on the independent. board 156 One bell/ buzzer point controlled by one push button 157 One light point controlled by two two way switches. 158 All as per item No- 149 above but One 15 A socket outlet independent with 2.5 sq mm PVC cable and 2.5 sqmm cable as earth continuity wire. 159 Supply and fix switch piano modularsingle pole one way 6 Amps one module complete all as specied . 160 Supply and fix switch piano modularsingle pole one way 16 Amps one module complete all as specied . 161 Supply and fix Modular switch 2 way 6A, 1 modulee complete all as specied . 162 Supply and fix Modular Bell push 6A 1 module complete all as specified . 163 Supply and fix Bell electric AC 230 Volts single pole ding dong type complete all as specified and as directed. 164 Supply and fixmodular socket outlet6A - 2/3 pin combined 2 module (multi purpose ) complete all as specified and as directed. 165 Supply and fix modular socket outlet6A/16A - 2/3 pin combined 2 module, complete all as specified and as directed. 166 Supply and fix ceiling rose of size 65 X 25 mm surface Bakelite three terminals complete all as specified and as directed. 167 S & F in replacement oflampangle/batten holderBakelite complete all as specified and as directed. 168 S & F Decorative wall light fixture made up of Polycarbonate, suitable for 9 W retrofit LED Lamp B22 base.. Make Havels, model- LHDL06160099 (CITY 3) 169 S&F in replacement LED tube light 20 Watt fitting white powder coated slim box type batten made of formed CRCAsheet with snap on installer sutable fordouble side connection LED tube in and including batten and tube etc complete in all respect. Make- Havells Model-Fixture REGALBATTENT 8UPTO1X22WSSBSWH, Tube-CRYSTAL 1213T8D STL 20W LED 865S GLASS or equivalent in Wipro/ Philips/Bajaj 170 S &F New E-Lite LED Pride Plus Neo. Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack With 10watt LED tube 171 Supply and fix fan step regulator, 120W - 2 module for ceiling fan of size 900 mm to 1400 mm sweep working on 230 Volts AC supply with all necessary connections etc completeall as specified and as directed. 172 Supply and fix sheet metal enclosure DBs SPN, 240V with 200 Amps rated bus barsdouble door complete all as specified and as directed of 12 Ways 173 Supply and fix sheet metal enclosure DBs SPN, 240V with 200 Amps rated bus barsdouble door complete all as specified and as directed of 4 Ways 174 Supply and fix in replacement MCB SP 6 to 32 Amps, 240 volts complete all as specified and as directed. 175 Supply and fix in replacement MCB SPN32Amps, 240 volts complete all as specified and as directed. 176 Supply and fix MCB SPN 40 Amps, 240 volts complete all as specified and as directed. 177 M & L sub main wiring with 2 single core, 10 Sq. mm, PVC insulated unsheathed,multi stranded copper conductor FRcable 1100 Volts grade incl 10 Sqmm PVC insulated unsheathed multi stranded copper conductor FRLSas continuous earth wire and connecting to common earth terminals completeall as specified and directed in PVC conduitsNote :-(i) Two run of copper cable and one run of earth wire and PVC conduit shall be measured as one length. 178 Ditto all as per item No - 169 above but with 2 runs of 4 Sqmm cable with one run of 4.0 Sqmm cable for earthing. 179 S & F Plug & socket enclosure in sheet metal enclosure with 20A SP MCB complete all as specified and as directed. 180 Supply,install, testing & commissioning of factory made LT panel wall mounted board made outof CRCA sheet 2 mm thick indoor type toltally enclosed weather,dust and vermin proof compartment type with front hinged door and locking arrengement mounted on M S flat iron clamp welded to panel body duly grouted on wall 415 V, 3 phase, 4 wire AC, 50 Hz having aluminium bus bar 160 Amps for pfase-03 Nos & neutral- 01 No with 02 Nos Earth Terminals. insulated with PVC sleeves, space for fixing single phse KWH Emergy meter 04 Nos 40x40x6 mm size angle iron hold fast, fastener bolts, copper lugs, spacers channels,rubber gaskets, locking knob, hylem sheet piece,PVC shrinkable sleeves, nut and bolts, washers etc suitable single core copper wire connectors, suitable compartments and epoxy power spray paint with primer complete all as specified including the following accessoriesincluding taking down old unservicable LT panel boardINCOMING- a) MCCB 415 V 4 POLE 25 KA breaking capacity of 63 Amps- 01 No b) R-Y-B phase LED indicating lamp-03 NosOUTGOING-a) MCB SPN 40 Amps, 230V, 10 KA, C curve - 05 Nosb) Providing space for and refixing existing single phase KWHelectric enery meter-04 Nos c) Copper wire 10 Sqmm wire and open terminals for all meters totaly pre wired. d) Glass windows for all meter for taking meter readingNote:-1. Cost of taking down electric meters from old unserviceable penel board keeping in safe custody, and refixing the same electric meters in new panel is deemed to be includede in rate quoted. 181 Taking down old unserviceable Exhaust fans, depositing to AGE E/M store & Supply and fix new exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm. (cutting hole in wall for instalation of exhaust fan is deemed to be included in rate quoted) 182 Taking down old unserviceable ceiling fans, depositing to AGE E/M store & supply and fixingnew ceiling fans complete with blades, down rods, accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) 183 Taking down old unserviceable storage type water heater, depositing to AGE E/M store & supply and fixingnew electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc 184 M&L earthing GI4mm GI wire complete with galvanized steel plate electrode 600 mm x 600 mm x 6.0 mm thick, burried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to GI wire 4 mm size by means of GI bolts, nuts, check nuts and washers, earth wire protected by galvanized steel pipe 15 mm bore (light grade) connected to main switch board or any other electrical equipment all as shown in electrical plate No. 3 of SSR-2009 Part I and includingnecessary excavation and earth work in any type of strata, 20 mm bore medium grade GI pipe for watering, funnel with wire mesh, PCC (1:3:6), type C-1 chamber, RCC (1:2:4), type B-1, reinforced with 6 mm dia MS round bars @ 15cm c/c both way for cover and MS frame etc., complete all as specified.

BRR:9697781 Supply Of Digital Clamp Meter With Vfd/Trms Measurement Features, 3&3/4 Digits Lcd/Led Display, 0-1000V Ac&Dc, 0-1000A Ac&Dc With Jaw Opening Of 51 Mm, Auto Power Off, Data Hold, 30 Ohms-30 Mega Ohms, 300 Hz-100Khz, To Work On 9V Battery With Ip-50 For Housing & Ip 20 Protection For Terminals With Fine Tip Testing Leads And Carrying Case.Digital Clamp Meter With Vfd/Trms Measurement Features, 3&3/4 Digits Lcd/Led Display, 0-1000V Ac&Dc, 0-1000A Ac&Dc With Jaw Opening Of 51 Mm, Auto Power Off, Data Hold, 30 Ohms-30 Mega Ohms, 300 Hz-100Khz, To Work On 9V Battery With Ip-50 For Housing & Ip 20 Protection For Terminals With Fine Tip Testing Leads And Carrying Case.,Digital Clamp Meter With Vfd/Trms Measurement Features, 3&3/4 Digits Lcd/Led Display, 0- 1000V Ac&Dc, 0-1000A Ac&Dc With Jaw Opening Of 51 Mm, Auto Power Off, Data Hold, 30 Ohms-30 Mega O Hms, 300 Hz-100Khz, To Work On 9V Battery With Ip-50 For Housing & Ip 20 Protection For Terminals With Fine Tip Testing Leads And Carrying Case. [ Warranty Period: 30 Months After The Date Of Delivery ] ]

BRR:9697657 Supply Of Display Unit (Tv) Of Screen Size: 55 Inches Resolution: 3840 X 2160 (Uhd) Typedisplay Unit (Tv) Of Screen Size: 55 Inches Resolution: 3840 X 2160 (Uhd) Type,Display Unit (Tv) Of Screen Size: 55 Inches Resolution: 3840 X 2160 (Uhd) Type: 4K Ultra Hd Detailed Specification: 55-Inch Display Unit (Tv), Bis Approved. Screen Size: 55 Inches Resolution: 3840 X 2 160 Uhd, Type: 4K Ultra Hd Bis, Number Of Hdmi Ports: 3, Number Of Usb Ports: 2, Number Of Vga Ports: 1 , Number Of Ethernet Ports: 1, Built-In Wi-Fi: Yes, Wi-Fi Direct: Yes, Composite Input: Yes Accessories Includ Ed In Scope Of Supply: Connecting Cable - 1, Remote Control - 1, Resolution (Pixels): 3840 X 2160 (Uhd), Cat Egory: Smart, Operating System , Android, Typical Brightness: 400?500, Screen Mirroring: Yes, Mount Type: Both Table And Wall Mount, Inbuilt Speakers: Yes, Speaker Output: 20 W X 2 Energy Star Rating: In Line With Government Of India Notification Numbers O.1896(E) And O.1897(E) : 5 Type Of Display Technology: Led Bac Klit Lcd Bis Registration As Per Crs Meity: Yes, Warranty Period: Up To 60 Months From The Date Of Delivery. Make : Samsung Or Sony Or Lg. [ Warranty Period: 60 Months After The Date Of Delivery ] ] => Limited

BRR:9697105 Supply Of Inverter Based Welding Rectifier Arc-200 50/60Hzinverter Based Welding Rectifier Arc-200 50/60Hz,Inverter Based Welding Rectifier Arc-200 50/60Hz, With Led Display And Ammeter, Voltmeter And With Current Supply Of 20-200 Amps, Volts-220-240 V, Protection Class -Ip-23 Single Phase Portable Weld Ing Plant With Air Cooling With Accessories( Electrode Holder And Earthing Cables, Screen) Acceptable Makes : Esab, Ador, Cruxweld, Weldstar. [ Warranty Period: 30 Months After The Date Of Delivery ] ]

BRR:9696380 Tender for Supply, Installation & Commissioning Of Sound System & Wireless Projector At The Department Of Education, Alipore Campus, Cu, Kolkata-27. , 16 Watts Pa 2 Way Compact Wall Mount Speaker 100V, Ps-400Tm, Ahuja Or Equivalent , 120 Watts Pa Mixer Amplifier ,Ssb 120, Ahuja Or Equivalent , Pauhf Wireless Dual Channel Handheld And Lapel Microphone, Studio Master,Xl-80Hl Or Equivalent , Pa Uhf Wireless 4 Channel Desktop Conference Microphone , Studio Master, Xr-1004C , 12 U Val Rack , Supply Of Pvc Cu Unsheathed Single Core Cable 1 Sqm Cu 90 Mtr Coil , Make-Havells , Wiring With Necessary Casing ( Between Amplifier& Speaker For Projector Power Lineincluding Modular Socket , Pvc Modular Board) , Projector Xga 4000 Lm / 25,000:1 Brightness/ Contrast Ratio Texas Instrumrnts Dlp Technology , Optoma , Projector Mounting Kit Heavy Weight , 100 Va Ups Make-Apc , Projector Screen Motorized 8 Ft X 6 Ft Hd , Optoma W/Less Hdmi Dongle Rx/ Tx

BRR:9696296 Tender For Arrangement Of Kiosk(1 No), Chair,(4 No) Table (2 No) For Opening Maa Canteen In 1, 32, 6, 4, 13,, 20 No Wazrd Under Sddm

BRR:9696007 Bids Are Invited For Computer Monitor (Q2) Total Quantity : 15

BRR:9695941 Bids Are Invited For Customized Amc/Cmc For Pre-Owned Products - Portable Ultrasound Machine With Lcd Monitor; Konica Minolta; Comprehensive Maintenance Contract (Cmc); Six Monthly; No

BRR:9695399 Bids Are invited for SMART DP TRANSMITTER WITH HART PROTOCOL, 2 WIRE, INTRINSICALLY SAFE, POWER SUPPLY:12 TO 30 VDC, O/P:4 TO 20 mADC, LOCAL LCD DISPLAY: BUILT IN, SPAN RANGE:0 TO 21 KG/CM2G, DIFFERENTIAL PRESSURE TRANSMITTER AS PER FOLLOWING SPECIFICATIONS (1) TYPE : SMART (HART PROTOCOL) 2-WIRE (2) OUTPUT: 4-20 MA, (3) POWER SUPPLY: 24V, DC, PRESSURE TRANSMITTER AS PER FOLLOWING SPECIFICATIONS (1) TYPE : SMART (HART PROTOCOL) 2-WIRE (2) OUTPUT: 4-20 MA, (3) POWER SUPPLY: 24V, DC (4) TOTAL ACCURACY: ±0.2 % OF SPAN @1:1 RANGE DOWN OR BETTER, PRESSURE TRANSMITTER AS PER FOLLOWING SPECIFICATIONS (1) TYPE : SMART (HART PROTOCOL) 2-WIRE (2) OUTPUT: 4-20 MA, (3) POWER SUPPLY: 24V, DC (4) TOTAL ACCURACY: ±0.2 % OF SPAN @1:1 RANGE DOWN OR BETTER, SMART PRESSURE TRANSMITTER SPECIFICATIONS RANGE: 0 - 60 Bar SERVICE: LIQ/GAS/VAPOUR SENSOR TYPE: Capacitive/Piezo resistive/Silicon Resonant/DPharp digital sensor. TEMP. LIMITS: AMBIENT -20 to +60 DEGC, PROCESS -20 to + 100 DEGC, SMART VACCUM PRESSURE TRANSMITTER, RANGE: ( -1.0 TO + 1.0 KG/CM2 ) , ACCURCY : +/- 0.1% , POWER SUPPLY : 18-40VDC,TURDOWN: 100:1, DIAPHRAGM SEAL TYPE (PAD) SMART PRESSURE TRANSMITTER FOR SERVICE: BENFIELD SOLUTION (MAINLY CONSISTING OF 18-23% K2CO3, 10 - 14% KHCO3), Remote seal DPT as per following specifications : 1) Service : Giammarco Vetrocoke solution (K2CO3:26-29% wt, Glycine: 0.5-1.2%wt, Diethanolamine: 0.5-1.2% wt, V2O5: 0.40-0.55% wt Total Quantity : 48

BRR:9695147 Bids Are invited for Re- Wiring, Cabeling, Conduting Including Db With Main Line Termination For The Entire Office , Installation Of Concealed Lights Fittings Like Spots , Panel Lights , Led Strip Lights Etc. For The Entire Office. , Providing And Fixing Gypsum Ceiling On Gyprox Gypsum Channel With Necessary Tapes And Joint Filling. , Light Gala Cutting , Grooving Where Needed In Whole Office , Providing And Fixing Pop Wall Punning Wherever Needed , Providing And Applying Paint On Ceiling , Providing And Applying Wall Paint , Polishing Of Door And Entire Office Wherever Needed , Breaking Of Existing Glass Partition Walls , Providing And Making Brick Wall With Near Saminar Hall , Providing And Making Brick Wall With Technology Arena Wall , Providing And Making Brick Wall With Media Area Wall , Floor Protection Sheet For The Entire Office To Cover Existing Flooring During Execution Of Work On Site , Rabbit Waste Removing , Deep Cleaning Of The Office , Providing And Fixing Of Door Finished In Laminate , Refurbishing Of Passage Entrance Door , Providing And Fixing Of Story Wall As Per Design , Providing And Fixing Of Ceiling Paneling As Per Design , Providing And Fixing Of Partition Wall Finished In Laminate And Panel As Per Design , Providing And Making Of Staircase Ramp For Seating , Providing And Fixing Of Side Storage Unit Finished In Laminate , Providing And Fixing Back Wall Paneling Finished In Laminate As Per Design , Providing And Fixing Pc Unit Finished In Laminate As Per Design , Providing And Fixing Led Screen Wall Partition Wall , Providing And Fixing Wall Paneling Wall Finished In Fabric , Providing And Fixing Window Partition Wall As Per Design , Providing And Fixing Passage Area Partition Wall As Per Design , Providing And Fixing Wall Partition For Display Pods As Per Design , Carpet For Whole Area Total Quantity : 2489

BRR:9694962 Bids Are Invited For Supply Of Active Led Video Wall With Video Controller For Brbcl , Installation, Testing And Commissioning Of Active Led Video Wall For Brbcl , Data Wall Display Professional Large Format Display (V2) Total Quantity : 2

BRR:9694900 Bids Are Invited For Wall Speaker , Power Amplifier , Wireless Dual Handheld Microphone Uhf , Wireless Dual Lapel Microphone Uhf , Gooseneck Microphone With Base , Digital Signal Processor , Data Wall , Led Controller , 4K Hd Base Hdmi Extender Set , Hdmi Audio De- Embedder 4K , Full Hd 1080P Ptz Camera , Camera Wall Mount , 4X1 Hdmi Quad Viewer , 4K Hdmi Extender Set With Rs 232 Output , Camera Control Joystick With Lcd , Touch Panel Controller With 10 Inch Tab , Poe Gb Network Poe Switch 16 Port , Laptop I7 , 15U Av Rack , Wires Cables And Accessories , Installation Commissioning Integration And Programming Total Quantity : 29

BRR:9694813 Bids Are invited for A 4 Size Paper 70Gsm 500 Sheets , Pencil Apsara 2Hb Or Equivalent , Pencil Rubber Apsara Or Equivalent , Pencil Cutter Apsara Or Equivalent , Single Punch Kangaroo Big Equivalent , Fevistick Tube 8Grm Pidilite Or Equivalent , Index File Ace Retaining Wisdom Equivalent , Paint Marker Pen Artline Ek 400Xf Equivalent , Cello Tape White , Stapler Machine 10 Kangaroo Or Equivalent , File Folder 15 X12 Transparent Poly Plastic A4 Equivalent , Marker Pen Black Thin Tip Luxor 1236 Equivalent , Ball Pen Blue Unomax 2X Or Equivalent , Red Pen Unomax 2X Or Equivalent , Black Pen Unomax 2X Or Equivalent , White Board Pen Black Cello Whitemate Fine Point , White Board Pen Blue Cello Whitemate Fine Point , Whitener Pen Officemate 7Ml Equivalent Total Quantity : 1802

BRR:9694779 Bids Are Invited For Safety Training Kiosk Total Quantity : 2

BRR:9694736 Bids Are Invited For 5MP FIXED BULLET CAMERA WITH 50 MTR IR , 5 MP MOTORIZED VARIFOCAL BULLET IR CAMERA WITH 50 MTR IR , 2 MP PTZ IP CAMERA 38 X ZOOM WITH 300 MTR IR , 16 CHANNEL NVR WITH 2 SATA SLOT , 6 TB SURVEILLANCE HARD DISK , JET STREAM 10 PORT GIGABIT SMART SWITCH 8 PORT POE , 24 PORT SFP ENTERPRISE LEVEL SWITCH L2 PLUS SMART MANAGED IPV 6 , 1000 BASE LX SMF MINI GBIC MODULE , 6U 600W X 500D FAN 6 SOCKET PDU CABLE MANAGER HARDWARE KIT 10 SET , METAL 19 INCHES PRE-EQUIPPED FIBRE OPTIC DRWETS WITH 4 CABLE ENTRIES , SUPPLY INSTALLATION TESTING AND COMMISSIONING OF SINGLE MODE OS1 OS2 9 125 , FIBER TERMINATION BOXES PVC , SUPPLY INSTALLATION TESTING AND COMMISSIONING OF SINGLE MODULE DUPLEX , SUPPLY LAYING AND FIXING OF 12 CORE OS1 OS2 LOOSE TUBE OUTDOOR CORRUGATED STEEL TAPE , SUPPLY LAYING AND FIXING OF 6 CORE OS1 OS2 LOOSE TUBE OUTDOOR CORRUGATED STEEL TAPE , CAT 6 ARMOURED CABLE 305 MTR , HDPE PIPE 32 MM 6 KG PRESSURE WALL THICKNESS 2.2 MM WEIGHT 0.200 GRAMS , 1 KVA ONLINE UPS WITH SMF BATTERY , 4 SQ MM 3 CORE COPPER ARMOURED CABLE , 3 SQ MM 2.5 CORE COPPER ARMOURED CABLE , 27 U 600W X 800D CABLE MANAGER WITH FANS 2 , ANPR SERVER WITH MANAGEMENT SERVER RECORDING SERVER 18 HDD AND VMS CAMERA , 5 KVA ONLINE UPS WITH SMF BATTERY FOR 3 HRS BACK UP , 65 INCHES DISPLAY UNITS , 55 INCHES DISPLAY UNITS , HDMI 3X3 VIDEO WALL CONTROLLER , HDMI CABLE 10 MTR , WORK STATION WITH 13 GEN INTEL i7 PROCESSOR WINDOWS 11 PRO NVIDIA T 1000 GRAPHICS 16 GB DDRS 4800 RAM 512 GB SSD SOLID STATE DRIVE , CAMERA MOUNTING POLES 20 FT , 4U GALVANIZED STEEL CONSTRUCTION WITH A VARIETY OF THICKNESS A COMPACT DESIGN WITH FRONT ACCESS AND A ROBUST STRUCTURE FOR POLE MOUNTING RACK HEAT SUCK FANS WITH INDUSTRIAL STANDARDS , WEATHER PROOF PVC CAMERA BOX , FABRICATION STANDS FOR PTZ , 16 AMPS MCB WITH SWITCH SOCKET BOARD , OFC CHAMBERS , OFC ROUTE MARKERS , DIGGING OF HARD SOIL MAKING PROPER TRENCH FOR HDPE LAYING AND REFILLING IT IN PROPER LEVEL TO GROUND , WARNING TAPE , 5O MM GALVD 60 OD 6Mtr , ROAD CUTTING AND PROPER REFILLING WITH RCC , HARDWARE AND ACCESSORIES FOR CAMERAS MOUNTING JN BOX CLAMPS , HARDWARE AND ACCESSORIES FOR ELECTRICAL MCB THIMBAL DIN RAIL POWER CONNECTOR ETC , HARDWARE AND ACCESSORIES FOR OFC PIGTAIL PATCH CORD JC BOX ETC , INSTALLATION COMMISSIONING SPLICING OF FIBRE AND CONFIGURATION OF CAMERAS AND NVRS AND ELECTRICAL WORKS POWER SURGE PROTECTOR INSTALLATION AND CONFIGURATION OF VIDEO WALL AND LED TV INTEGRATION , INVERTER AC 2 TON WITH VOLTAGE STABILIZER FOR GDCC AND SECURITY SECTION ALONG WITH INSTALLATION , INVERTER AC 1.5 TON WITH VOLTAGE STABILIZER FOR GDCC AND SECURITY SECTION ALONG WITH INSTALLATION Total Quantity :

BRR:9694275 Bids Are invited for Laboratory Face Mask Cotton - Refer Specifications , Rubber Gloves - Refer Specifications , Thermometer With Probe And Alarm Digital - Refer Specifications , Rubber Gloves Washing And Cleaning - Refer Specifications , Heat Resistance Gloves Silicone 350 C - Refer Specifications , Labels Blank Sticker 2_5 Inch X 1_5 Inch - Refer Specifications , Markers Useful On All Surface - Refer Specifications , Laboratory Coat - Refer Specifications , Laboratory Cap - Refer Specifications , Safety Goggles Poly Carbonate Lenses - Refer Specifications , Cling Film 12 Inch X 30 Mt - Refer Specifications , Nylon Ties For Locking - Refer Specifications , Heating Mantles 1000 Ml - Refer Specifications , Sealing Machine 12 Inch - Refer Specifications , White Board 4 X 3 Feet - Refer Specifications , Pin Up Display Board 4 X 3 Feet - Refer Specifications , Pin Up Display Board With Cover 3 X 2 Feet - Refer Specifications , Storage Device 32Gb Otg - Refer Specifications , Storage Device 1Tb - Refer Specifications , Bottle Reagent 1000 Ml - Refer Specifications , Silica Crucible 25 Ml - Refer Specifications , Plant Grow Bags 12X12 - Refer Specifications , Plant Grow Bags 18X18 - Refer Specifications , Swan Neck Tap 3 Way Brass Chrome Plated 3 Way - Refer Specifications , Vacuum Grease 50 Gm - Refer Specifications , Silica Gel 500 Gm - Refer Specifications , Dessicator Vacuum With Perforated Plate 250 Mm - Refer Specifications , Spirit For Lab Use 5 Lit - Refer Specifications , Measuring Cylinder 500Ml Pp - Refer Specifications , Measuring Cylinder 1000 Ml Pp - Refer Specifications , Wash Bottle New Type 500 Ml - Refer Specifications , Measuring Beaker With Handle Pp 500 Ml - Refer Specifications , Draining Tray 53X41x17 - Refer Specifications , Pasteur Pipette Dropper 3 Ml - Refer Specifications , Nitrile Gloves Purple Thick - Refer Specifications , Specimen Container 500 Ml - Refer Specifications , Specimen Container 250 Ml - Refer Specifications , Cotton Cab 32 Abso

BRR:9694045 Bids Are Invited For M9494206097 Indoor Led Screen Resolution -P2.5 Size Total Quantity : 1

BRR:9694040 Bids Are Invited For Interactive Panels With Cpu Total Quantity : 13

BRR:9693970 Bids Are Invited For Digital Kiosk Machine (Q3) Total Quantity : 10

BRR:9693958 Bids Are invited for Lexi Pen Blue , Lexi Pen Blue Refill , Lexi Pen Black , Cello Tape , Brown Tape , Paper Tag , Apsara Pencil , Stapler No 10 , Stapler Pin No 10 , Stapler No 24 Oblig 6 , Stapler Pin No 24 Oblig 6 , Hp45 Stapler , Hp45 Stapler Pins , 1Q Register , 2Q Register , 3Q Register , 5Q Register , Detailed Indian Map , Marker Pen Blue Small , Marker Pen Big , Brown Sheet , Highlighter , Correction Pen , Eveready Cell S Size , Eveready Cell M Size , Tissue Paper , Fevicol Mr 50G , Brown Envelop S Size , Brown Envelop M Size , Brown Envelop L Size , Transparent Plastic Cover , Tourniquet , White Board Marker Pen , Cigarette Lighter , Duracell Ultra Aa Cell , Duracell Ultra Aaa Cell , Plastic L Folder , Non Dust Eraser , Pilot Pen Red And Blue , Paper Cutter , Scissors Small , Cfl Bulb 7W , Torch , Measure Tape Tailoring , 12 Inch Metal Scale , Multipurpose Rectangular Small Plastic Trays , Carbon Paper , Cello Tape 1 Inch , Plastic Coated Gem Clip , Sticky Notes , Pen Cups For Desk , Brown Envelop A4 Size , White Legal Paper , Jute Sutali Role , Rubber Bandsand High Elastic 50 Grams - Rubber Bandsand High Elastic50 Grams , Candle , Cloth Envelop Size 11X5 Inch , Color Coding Garbage Bag M Size Yellow And Red And Blue And Black Total Quantity : 1752

BRR:9693908 Bids Are Invited For Custom Bid For Services - Procurement Of All Weather Outdoor Led Display With Installation

BRR:9693252 Bids Are Invited For Computer Monitor (V2) (Q2) Total Quantity : 3

BRR:9693152 Bids Are invited for Plaster - Breaking Of Old Damaged Plaster At Certain Places Applying New Plaster With Sand And Cement Scaffolding At Kitchen Area And Hall Area , Painting - Scrapping Cleaning And Painting Of Wall Ceiling Etc With Plastic Paint Two Coats Along With Scaffolding , Sink - Kitchen Sink With Granite Platform , Slab - New 2By 2 Gypsum False Ceiling Slab With Gi Framework Etc At Kitchen Area , Led Lights - New 2By2 Led Panel Lights , Electrical Work - New Electrical Board And Wiring Work At Kitchen Area With Necessary Fittings , Door - New Aluminium Door With Frame Along With Glass And Fittings , Pipeline - Removing Of Old Drainage Pipeline And Making Of New Cement Sewer Line And Chamber With Plaster Along With New Floor Tiles , Sink - Making Of New Sink Door With Both Side Laminate And Fittings , Painting - Scrapping Cleaning And Painting Of Wall Ceiling Etc With Plastic Paint Two Coats Along With Scaffolding At Hall Area Total Quantity : 6954

BRR:9693047 Bids Are Invited For Interactive Panels With Cpu (Q2) Total Quantity : 2

BRR:9692974 Bids Are Invited For Level Meter , Pressure Switch , Remote Control Unit , Hygrometer , Table Mount Lcd Display , Hour Meter , Temperature Sensor , Resistivity Controller-Itms5 , Temp Sensor , Power Supply , Power Supply Unit Ups 2.5 Kva 230V-Ar , Air Charging Gun , Digital Dew Point Meter Total Quantity : 29

BRR:9692934 Bids Are invited for Interactive Panel With Cpu , Electronic Lectern , Inverter With Battery , Amplifier , Speaker , Wireless Microphone Collar And Handheld , Web Camera , Misc Work For Classroom Setup Total Quantity : 8

BRR:9692820 Bids Are invited for Digital Thermometer , Folding Bed , Bed Sheet , Pillow , Single Blanket , Quilt , Warm Bed Sheet , Towel , Towel Hand , Ice Box Small , Plastic Bucket , Pin Up Notice Board 3 Ft X 4 Ft , Pin Up Notice Board 2 Ft X 3 Ft , Electric Kettle , Double Bed Sheet With Pillow Cover Total Quantity : 41

BRR:9692792 Bids Are Invited For 1 Sthil Recoil/Pull star petrol engine lawn mowers 2. Split Air Conditioner 3. Multimedia Simulator Board 4. Heavy Duty High Pressure 5. Television TV 55 Commercial Cross Trainer 7. Smith Machine Leg Press/hack squat 9. Rowing Machine 10. Visual Projection System (VPS) 11 Customised Display Board with Projector Screen 12 Duch Cooler Total Quantity :

BRR:9692643 bids are invited for design installation and maintenance of educational lab/centre - education centre; maintenance of hardware (amc/cmc); buyer -1 backdrop 2 digital camera with memory card and reader 3 tripod 4 headphones 5 soundproof wall paneling 6 carpet 7 interactive flat panel 8 condenser microphones 9 lapel microphones 10 lighting equipment 11 video editing software (3 year license) 12 storyboarding software (3 year license) 13 computer 14 display screen 15 teleprompter 16 digital designing software 17 laptop 18 tablet 19 delivery and commissioning

BRR:9692635 Bids Are invited for Pvc Conduit Pipe , Pipe Clip , Led Panel Surface Light , 10A Socket Outlet , 16A Switch , 16A Socket Outlet , Modular Plate , 8 Modular Pvc Surface Box , Copper Wire Green Colour , Copper Wire Blue Colour , Copper Wire Black Colour , Copper Wire Red Colour , Copper Wire Black , Ceiling Fan , Changeover Switch 3 Phase 4 Pole , Copper Wire Black Color For Lt Panel , Copper Wire Red Color For Lt Panel , Copper Wire 10Mm For Lt Panel , Copper Wire 25Mm For Lt Panel , Insulation Tape , Copper Lugs 10Mm , Copper Lugs 10Mm , Flexible Pvc Pipe , Dp Mcb , Mcb Distribution Box , Working Charge For Modular Wiring Points , Lt Panel Installtion Total Quantity : 710

BRR:9692478 Bids Are invited for Pilot Pen 1.0 Mm Blue - Dark And Bold , Pilot Pen 1.0 Mm Black - Dark And Bold , Pilot Pen 1.0 Mm Red - Dark And Bold , Pilot Pen 1.0 Mm Green - Dark And Bold , Pilot Pen 0.5 Mm Blue - Dark And Bold , Pen Uniball Blue - Dark And Bold , Pen Uniball Black - Dark And Bold , Gel Pen Add Gel - Dark And Bold , Clutch Pen Jetter - Dark And Bold , Ball Pen Blue - Dark And Bold , Ball Pen Black - Dark And Bold , Ball Pen Red - Dark And Bold , Ball Pen Green - Dark And Bold , Fountain Pen - Dark And Bold , Pencil - Dark And Bold , Correction Pen - Big Size Non Drying , Ohp Marker Black - Big Size Non Drying , Ohp Marker Blue - Big Size Non Drying , Ohp Marker Red - Big Size Non Drying , Ohp Marker Green - Big Size Non Drying , Permanent Marker Black - Big Size Non Drying , Permanent Marker Blue - Big Size Non Drying , Permanent Marker Red - Big Size Non Drying , White Board Marker Black - Big Size Non Drying , White Board Marker Blue - Big Size Non Drying , White Board Marker Red - Big Size Non Drying , White Board Marker Green - Big Size Non Drying , Highlighter Pink - Big Size Non Drying , Highlighter Green - Big Size Non Drying , Highlighter Red - Big Size Non Drying , Highlighter Blue - Big Size Non Drying , Register 400 Pages - Classmate , Register 227 Pages - Classmate , Notebook - Classmate , Notepad 33 No. - Classmate , Notepad 22 No. - Classmate , Photography Paper - 180 Gsm High Gloss , Lamination Roll - 100 Micron , L-Shape Folder - Transparent , File Cover - Tough Cover , Signature Folder - Hard Plastic Cover , Executive Folder - Leather With Zip , Ring Folder - Hard Plastic Cover , Milky Folder - Hard Plastic Cover , Folder With Leaf - 50 Transparent Leaf , Cello Tape 1 Inch - 70 Meter , Cello Tape 2 Inch - 70 Meter , Brown Tape - 70 Meter , Colour Tape Blue - 70 Meter , Colour Tape Red - 70 Meter , Colour Tape Green - 70 Meter , Colour Tape Yellow - 70 Meter , Insulation Tape - 30 Meter , Double Side Tape - 10 Meter , Correction Tape - 20 Me

BRR:9692470 Bids Are Invited For Led Display 7 Inch With Frame , Camera Of Front And Rear , 12V 2A Power Adapter , Wiring , Memory Card 128 Gb Total Quantity : 145

BRR:9692426 Bids Are invited for Ss Curtain Rods - 7 Ft Width , Visitor Chairs - S Type Chairs , Led Monitor - 55 Inches Size , Incumbancy Board - Acrylic Board , Name Board - Office Name Board , Printer Cartridges - A3 Copier Machine , Printer Cartridges - Hp All In One Pc , File Pads , Stablizers - 1 Kv Stablizer , Pendrive - 128 Gb Otg Pendrive , Tumbler Glasses - 300 Ml Capacity , Ball Point Pen - Gel Pens Total Quantity : 161