BRR:8662568 Rate Contract Of Orthopedics Implants , Acromio-Clavicular Hook Plate With Screws , Anatomical Radius Plate With Screws , Anatomical Radius Plate With Screws (Titanium) , Angle Blade Plate (95Degree) With Screws , Angle Blade Plate (95 Degree) With Screws (Titanium) , Ankle Arthrodesis Nail (Ttc) With Screws/Bolts , Ankle Arthrodesis Nail (Ttc) With Screws/Bolts (Titanium) , Bone Cement With Antibiotics , Calcaneal Locking Plates With Screws , Calcaneal Locking Plates With Screws(Titanium) , Cc- Screws With Washers , Cc- Screws With Washers (Titanium) , Charnley’S Clamp For Arthrodesis , Clavicle Plate For Lateral End Clavicle With Screws , Clavicle Plates With Screws , Clavicle Plates With Screws( Titanium) , Dcs Plate With Screws , Dcs Plate With Screws (Titanium) , Delta Fixator , Dflp (Distal Femoral Locking Plate) With Screws (Lateral) , Dflp (Distal Femoral Locking Plate) (Lateral) With Screws (Titanium) , Dflp (Distal Femoral Locking Plate) With Screws (Medial) , Dflp (Distal Femoral Locking Plate) With Screws (Medial) (Titanium) , Dhs With Screws , Dhs With Screws (Titanium) , Distal Humerus Locking Plates With Screws , Distal Humerus Locking Plates With Screws (Titanium) , Distal Radius Volar With Screws (Variable Angle Plate) , Distal Radius Volar (Variable Angle Plate) With Screws (Titanium) , Distal Radius Volar/Dorsal Plate With Screws , Distal Radius Volar/Dorsal Plate With Screws (Titanium) , Distal Tibial Locking Plates With Screws (Medial/ Antero-Lateral) , Distal Tibial Locking Plates With Screws (Medial/ Antero-Lateral) (Titanium) , Distal Tibial Nail System With Nail/Bolts , Distal Tibial Nail System With Nail/Bolts (Titanium) , Distal Ulna Anatomical Plate With Screws , Distal Ulna Anatomical Plate With Screws (Titanium) , Distraction/Jess Fixator , Expert Tibial Nail With Bolts/Screws , Expert Tibial Nail With Bolts/Screws (Titanium) , Extra Articular Distal Humerus Plates With Screws , Extra Articular Distal Humerus Plates With Screws (Titanium) , Femoral Osteotomy Plate With Screws , Femoral Osteotomy Plate With Screws (Titanium) , Femur Anatomical Plate Lateral With Screws , Femur Anatomical Plate Lateral With Screws (Titanium) , Femur Anatomical Plate Medial With Screws , Femur Anatomical Plate Medial With Screws (Titanium) , Fibula Anatomical Plate With Screws , Fibula Anatomical Plate With Screws (Titanium) , Fibula Locking Plate With Screws , Fibula Locking Plate With Screws (Titanium) , Figure Of 8 Plate For Epiphysiodysis , Figure Of 8 Plate For Epiphysiodysis (Titanium) , Fns With Bolt/Screws (Femoral Neck System) , Forearm External Fixator , Forearm Rush Nail With Bolts/Screws , Forearm Square Nail With Bolts/Screws , Gigli Saw Wires With Hooks , Gt Stabilization Plate With Screws , Herbert Screws , Herbert Screws (Titanium) , High Tibial Osteotomy Plates With Screws , High Tibial Osteotomy Plates With Screws (Titanium) , Hybrid Fixator Complete Set , Illizarov’S Ring Fixator Complete Set , Interlock Humerus Nail With Screws , Interlock Humerus Nail With Screws (Titanium) , Interlock Tibial Nail With Bolts/Screws , Interlock Tibial Nail With Bolts/Screws (Titanium) , Interlocking Femoral Nail With Bolts/Screws , Interlocking Femoral Nail With Bolts/Screws (Titanium) , K-Wire Different Sizes , Lag Canulated Screws With Washers For Hip Fixation , Lag Canulated Screws With Washers For Hip Fixation (Titanium) , Lcdcp (Low Contact Dynamic Compression Plate) With Screws, Broad (Titanium) , Lcdcp(Low Contact Dynamic Compression Plate) With Screws, Narrow , Lcdcp(Low Contact Dynamic Compression Plate) With Screws, Narrow (Titanium) , Lcdcp(Low Contact Dynamic Compression Plate) With Screws, Broad , Lisfranc Plate With Screws , Locking Broad Plates With Screws. , Locking Broad Plates With Screws. (Titanium) , Locking Small Plates With Screws , Locking Small Plates With Screws (Titanium) , Long Proximal Femoral Nailing (Pfn) System With Screws/Bolt , Long Proximal Femoral Nailing (Pfn) System (Titanium) With Screws/Bolt , Malleolar Screws , Malleolar Screws (Titanium) , Metacarpal/Metatarsal Plates With Screws , Metacarpal/Metatarsal Plates With Screws (Titanium) , Mini Fragment Plate With Screws , Mini Fragment Plate With Screws (Titanium) , Multifunctional Retrograde Femur Nail (Mrfn) Distal Femur Nail With Bolts/Screws With Multiple Holes , Multifunctional Retrograde Femur Nail (Mrfn) Distal Femur Nail With With Bolts/Screws Multiple Holes (Titanium) , Multiple Cannulated Screws-3 , Multiple Cannulated Screws-3 (Titanium). , Narrow Locking Plates(Lcp) With Screws , Narrow Locking Plates(Lcp) With Screws (Titanium) , Olecranon Locking Plates With Screws , Olecranon Locking Plates With Screws (Titanium) , One Third Tubular Plate With Screws , One Third Tubular Plate With Screws (Titanium) , Pedicle Screws With Rods. , Pedicle Screws With Rods.( Titanium) , Pelvic Plate With Screws , Pelvic Plate With Screws (Titanium) , Pelvis External Fixator Set , Peri Prosthetic Plates With Screws , Peri Prosthetic Plates With Screws (Titanium) , Pflp With Screws (Proximal Femoral Locking Plate) , Pflp With Screws (Proximal Femoral Locking Plate) (Titanium) , Pfn A3 Long With Screws , Pfn A3 Long With Bolts (Titanium) , Pfn A3 Short With Bolts , Pfn A3 Short With Bolts (Titanium) , Plif (Posterior Lumbar Interbody Fusion) , Plif (Posterior Lumbar Interbody Fusion) (Titanium) , Posterior Malleolar Plate For Tibia With Screws , Posterior Malleolar Plate For Tibia With Screws (Titanium) , Posterior Spine Fixation Construct (With Screws And Rods) , Posterior Spine Fixation Construct (With Screws And Rods)( Titanium) , Proximal Femoral Nail A2 (Pfna2) With Helical Blade , Proximal Femoral Nail A2 (Pfna2) With Helical Blade (Titanium) , Proximal Femoral Nail A2 (Pfna2) With Screw , Proximal Femoral Nail A2 (Pfna2) With Screw (Titanium) , Proximal Humerus Locking Plate With Screws (Philos Plate) , Proximal Humerus Locking Plate With Screws (Philos Plate) (Titanium) , Proximal Humerus Nail With Bolts , Proximal Humerus Nail With Bolts (Titanium) , Proximal Tibial Buttress Locking Plate With Screws , Proximal Tibial Buttress Locking Plate With Screws (Titanium) , Proximal Tibial Lateral Locking Plate With Screws , Proximal Tibial Lateral Locking Plate With Screws (Titanium) , Proximal Ulna Anatomical Plate With Screws , Proximal Ulna Anatomical Plate With Screws (Titanium) , Proximal Ulna Hook Plate With Screws , Proximal Ulna Hook Plate With Screws (Titanium) , Radial Head Plates With Screws , Radial Head Prosthesis With Cement , Radial Head Prosthesis With Cement (Titanium) , Rail Road Fixator , Ring Plate For Upper End Tibia With Screws , Short Proximal Femoral Nailing(Pfn) System , Short Proximal Femoral Nailing(Pfn) System (Titanium) , Spanning External Fixator , Spinal Cages For Tlif (Transforaminal Lumbar Interbody Fusion) , Spinal Cages For Tlif (Transforaminal Lumbar Interbody Fusion)( Titanium) , Staples For Epiphysiodysis , Star Plate For Patella With Screws , Steinmann Pin With Stirrup , Supracondylar Femur Nail With Screws , Supracondylar Femur Nail With Screws (Titanium) , Suprapatellar Nail With Screws , Suprapatellar Nail With Screws (Titanium) , Tbw Set With Ss Wire , Tbw Set With Cannulated Screws Ss , Tens Nails (Titanium) , Tibia Anatomical Plate Lateral With Screws , Tibia Anatomical Plate Lateralwith Screws (Titanium) , Tibia Anatomical Plate Medial With Screws , Tibia Anatomical Plate Medial With Screws (Titanium) , Tibial Osteotomy Plate With Screws , Tibial Osteotomy Plate With Screws (Titanium) , Titanium Cone (Bone Substitute) , Titanium Wedge (Bone Substitute) , Tsp With Screws (Trochantricstabilisation Plate) , Ultra Short Trochantric Femoral Nail With Bolts (Tfn) , Ultra Short Trochantric Femoral Nail (Tfn) With Bolts/ Screws (Titanium) , Uniplanar Fixator , Vac (Vacuum Assisted Closure Therapy) , Y Plate For Distal Humerus With Screws , Y Plate For Distal Humerus With Screws (Titanium) , Expendable Mesh Cages Of All Sizes With Instrumentations (Titanium) , Lateral Mass Screw With Rods Along With Occiput Cervico Plate System(Titanium) , Percutaneous Pedicle Screw With Rods Along With Complete Instruments (Titanium) , Cervical Spine Plates With Screws (Titanium) , Cervical Spine Zero Profile Cages (Titanium) , Antibiotic Spacer For Hip , Articulating Spacer For Revision Thr , Cemented Mop (Metal On Poly/ Ceramic On Poly) , Cemented Thr With Cement & Gun Dispenser. , Cocr Thr Prosthesis , Dual Mobility Total Hip Replacement , Dual Mobility Total Hip Replacement (Titanium) , Fixed Bipolar Prosthesis With Bone Cement , Hybrid Thr (Uncemented Cup With Cemented Stem) , Long Stem Thr (Cemented) , Long Stem Thr (Un-Cemented) , Megaprosthesis. , Modular Bipolar Prosthesis Cemented With Gun Dispenser , Modular Bipolar Prosthesis Uncemented , Modular Bipolar Prosthesis Uncemented (Titanium) , Revision Hip Prosthesis Acetabulum Revision , Revision Hip Prosthesis Femoral Stem Revision , Revision Hip Prosthesis Total , Short Stem Thr , Thr With Calcar Stem , Titanium Thr Prosthesis , Uncemented Mop(Metal On Poly/ Ceramic On Poly) , Uncemented Thr , Antibiotic Spacer For Knee , Articulating Spacer For Revision Tkr , Cocr (Tibia Femur) Tkr With Cement Ps, Highly Cross Linked Poly , Cocr (Tibia Femur) Tkr With Cement Cr, Highly Cross Linked Poly , Femoral Side Knee Revision Implant , Antibiotic Spacer Moulds For Hip , Tibial Side Knee Revision Implant , Tibia Augment , Femur Augment , Total Knee Revision Implant (Hinge) , Tumor Knee Mega/Endoprosthesis , Uncemented System For Knee Arthrodesis , Unicondylar Knee Replacement , Tkr With Patella Resurfacing (Ps) (Cocr) , Tkr With Patella Resurfacing (Cr/Ps) (Titanium) , Cocr Femur And Titanium Tibia (Fixed Bearing) Both Compatible With Rod And Augment, Fixed Bearing Poly Insert. , Acetabulum Cage , Total Elbow Replacement Prosthesis , Total Elbow Replacement Prosthesis (Titanium) , Total Shoulder Prosthesis , Total Shoulder Prosthesis (Titanium) , Tumor Prosthesis For Ankle , Uncemented System For Limb Salvage , Reverse Shoulder Arthroplasty , Shoulder Hemi Arthroplasty (Neer Prosthesis) , Wegnar Long Stem Titanium For Primary And Revision Hip , Co-Cr Head For Thr , Jumbo Acetabulum Cup For Revision Hip , Metal Augment For Revision Thr , Metal Augment For Revision Tkr , Disposable Pulsatile Lavage Suction , Complete Package Acl/Pcl-Endobutton And Interference Screw(Titanium) , Complete Package Acl/Pcl-Endobutton And Interference Screw(Peek) , Complete Package Acl/Pcl-Endobutton And Interference Screw(Bioabsorbable) , Anchor Suture(Titanium) 1.5Mm-5.5Mm Single/Double Loaded , Self-Punching Knotless Anchors Biocomposite, Fenestrated, Size 5Mm To 5.5Mm, With Internal Suture Locking , Peek Interference Fenestrated Screws With Diameter Of 6 Mm To 12 Mm Of Length 25-35Mm For Tibial Fixation In Acl Reconstruction , Bio Composite Fenestrated Interference Screws With Diameter Of 5 Mm To 12Mm Of Length 25-35Mm , Self Punching Knotless Anchors Peek, Fenestrated, Size 5.0 To 5.5Mm, With Internal Suture Locking , Self-Punching Knotless Anchors Biocomposite, Fenestrated Size 5Mm To 5.5Mm, With Internal Suture Locking , Fibre Tape , Double Loaded Metal Anchors (Ti) 4.5-5.5Mm For Shoulder With 4 Needles Assembly With Proximal Cutting Threads. , Fiber Wire , Single Loaded Metal Anchors (Ti) 2.5-3Mm For Shoulder Arthroscopy With Proximal Cutting Threads. , Double Loaded Metal Anchors (Ti) 4.5-5.5Mmmm For Shoulder Arthroscopy With Proximal Cutting Threads. , All Suture Anchor Of Size 2.5Mm-3.0 Mm, Double Loaded Meant For Rotator Cuff Repair With #2 Suture. , All Inside Meniscus Repair System With Pre Knotted Implant Mounted On A Rigid Needle , Shaver Blades (Assorted Sizes , All Suture Anchors Of Size 1.5Mm-2Mm, Single Loaded (Meant For Bankart And Labrum Repair) With Suture. , Suture Washer Size Ranging From 15 To 17Mm Dia, (Assorted Sizes) , Inside Out Meniscial Repair Needles With Eye At One End , Free Metal Titanium Endobutton , Disposable Graduated Endoscopic Cannulated Drill Bit, 4.5Mm , Disposable Arthroscopic Suture Cutter , Disposable Needle For Suture Retrieval For Cuff Repair , Transparent Arthroscopic Shoulder Cannula (Assorted Sizes) , Suture Washer (Assorted Sizes)

BRR:8659139 Supply Of Tlif Peek Cage Any Size Implant Spi For Lumber Spinetlif Peek Cage Any Size Implant Spi For Lumber Spine,Tlif Peek Cage Any Size Implant Spi For Lumber Spine ] Divisional Rly Hospital, Ngp, Cr Pcmm/Cr Maharashtra 3.00

BRR:8667546 Tender For Overhauling work of flue gas & air ducting and damper in Unit-II, at 2x300 MW, DCRTPP, HPGCL, Yamuna Nagar--- 1 Overhauling work of flue gas & air ducting and damper in Unit-II, DCRTPP 2 Overhauling work of flue gas & air ducting and damper in Unit-II (Part-A) 3 Removal, Lifting & shifting of ash (Part-B) 4 Rate for patch work of duct(Part-B) 5 Servicing of actuator and gear box of gates/dampers(Part-B) 6 Replacement of metallic expansion bellow (Part-B) 7 Repair of metallic expansion bellow (Part-B) 8 Replacement of non- metallic expansion bellow at PA fan/FD /ID fan outlet(Part-B) 9 Running Mtr. Of welding(Part-B) 10 Servicing of any gate and damper(Part-B)

BRR:8665454 Supply Of Teflon Tape 0.003 Thick 20Mm.( 3/4) Wide Etc .Teflon Tape 0.003 Thick 20Mm.( 3/4) Wide Etc .,Teflon Tape 0.003 Thick 20 Mm.( 3/4) Wide & 12 Mtrs. Long Unsintered Ptfe Type Fo R Thread Sealing Application To Specn. No. Is:14643/99 (Reaffirmed- July,2025),Equivalent To Bs: 4375-1968. Make - Kohinoor/Crown Or Similar. [ Warranty Period: 30 Months After The Date Of Delivery ] ]

BRR:8664391 Bids Are invited for Microwave Turntable Plate - Any Brad , 1.7 Ml Centrifuge Tube - Genaxy Scientific , Cotton Roll - Bengal Surgical , Tissue Roll - Any Make , Aluminium Foil - Papyrus , Blotting Paper - Any Make , Herbarium Sheets - Anymake , Liquid Handwash - Dettol , Antiseptic Liquid - Dettol , Lab Clean Detergent - Labclean , Colins - Colin Liquid , Wipe Cloth Microfiber - Ultra Absorbent Magic Cleaning Cloth , Garbage Bag Medium Size - Shalimar , Manual Polar Ice Crusher - Any Make , Milton Polar Ice Storage Pail With Tong - Milton , Butter Paper - Any Make No Print Plain , Optical Sealing Film 96 Well Pcr Plate - Himedia , Transparent Zip Lock Storage Bag - Dharj , Transparent Zip Lock Storage Bag - Dharj , Chemical Resistant Heavy Duty Gloves - Narv , Butterfly Net With - Restcloud , Insect And Butterfly Habitat Terrarium Pop-Up - Restcloud , Rechargable Or Battery Powered Trekking Head Torch - Brand , Snake Rescue Bag - Gafe , Cuveete - Quartz , Variable Volume Pipeete - Tarson , Variable Volume Pipeete - Tarson , Variable Volume Pipeete - Tarson , Variable Volume Pipeete - Tarson , Microtip Box - Tarson , Microtip Box - Tarson , Microtip Box - Tarson , Micro Pestle - Tarson , Wide Mouth Bottle - Tarson , Carboy With Stopcock - Tarson , Erlenmeyer Cell Culture Flask - Tarson , Measuring Cylinder - Tarson , Measuring Cylinder - Tarson , Measuring Cylinder - Tarson , Pasteur Pipeete - Tarson , Spiceman Container - Tarson , Spiceman Container - Tarson , Nitrile Gloves Medium - Tarson , Hand Protector Grip - Tarson , Tarson Tube - Tarson , 96 Places Reversible Rack With Cover - Tarson , Flip Flop Microtube Rack - Tarson , Parafilm - Tarson , Cryo Tag - Tarson , Cryomarker - Tarson , Maxiamp Pcr Tube - Tarson , Pcr Workstation Rack - Tarson , Magnetic Stirrer Bar - Tarson , Magnet Retriever - Tarson , Gel Scoop - Tarson , Autoclavable Bag - Tarson , Burette - Borosil , Conical Flask 250Ml - Borosil , Conical Flask 2000Ml - Borosil , Test Tube 7Ml - Borosil , P

BRR:8664367 Bids Are Invited For Platelet Agitator And Incubator (V2) (Q2) Total Quantity : 2

BRR:8664220 Bids Are Invited For Ptfe (Polytetrafluoroethylene) Rods (Q3) Total Quantity : 170

BRR:8660233 Tender For Special Repair / Replacement Of Ber Dg Set 250 Kva And 400 Kva At Iam Iaf Under Ge (Af) Marathahalli; 1 Supply, Installation, commissioning and testing of acoustic enclosure Diesel Engine Generating set wi th AMF Panel 250 KVA/200 KW (CPCB IV+), 415 Volt, 0.8 lagging power factor 50 HZ, 1500 RPM, self excited self regulated brush less AC generator mounted on common base plate complete with fuel tank, battery and standard accessories and fittings including acoustic enclosure and all components as detailed complete all as specified and directed listed as following:- Make of DG set assembled with sound proof canopy - Greaves Cotton Ltd, Pune., Cummins, Ashok Leyland, Kirloskar. 2 (a) Diesel Engine: The capacity of Diesel engine 303 HP, water cooled, Inline, 6 cylinder, 4 stroke, 1500 RPM coupled with alternator, turbo charged after cooled, heavy duty air cleaner as per ISO 3046, w ter separate filter, fuel feed pump and other accessories as per relevant IS / BS-5514 with an overload capacity of 10% for one hour in 12 hrs, continuous running complete with standard accessories all as specified and required for safe handling and operation, salient features of accessories shall be as under:-(i) Fly wheel with housing (ii) PT fuel pump(iii) STC injectors(iv) Turbocharger, pulse tuned exhaust manifold, stainless steel exhaust flexible connections.(v) Radiator/heat exchanger with initial filled coolant (vi) Full flow filters for fuel, lube oil and by pass filter(vi) dry type replaceable paper element air cleaner with restriction indicator(vii) initial fill lube oil(viii) Starter motor 24 volts(ix) Charging alternator 24 volts 3 (b) Alternator: Standard design alternator rated at 250 KVA net output at site after considering de ratings as per site conditions at 0.8(lag) power factor AC, 3 phase four wire system 415 volts 50Hz, 1500 RPM self excited self regulated screen protected / drip proof IP23 enclosure brush less design with winding in pole faces, insulating class ‘H’ and voltage regulation of ± 0.5 to 1% at rated voltage from no load to full load, The alternator shall be confirming to BS 613/5000 and shall be in position to generate supply with frequency regulation with in± 1% tolerance the alternator will be suitable for tropical climate and shall generally confirm to BS-2613/500/IS-47221) Insulation Class-‘H’2) Excitation: self Excited3) Regulation performance: The voltage is K pt constant with ± 1 % manual voltage adjustment within adjustment within ±5%4) Frequency regulati n ± -1% 4 (c) AMF Panel :- Separate cubicle control panel Indoor type control cubical made out of 2.00 mm thick CRCA sheet dust and vermin proof totally enclosed with front opening of 415 volts 3 -phase 4 - wire AC 50 Hz, including powder coated, copper bus bar of one and half times the rated load of 250 KVA alternator out door type complete with internal wiring with PVC insulated single core copper conductor multi stranded wire of 1200 volts grade of suitable capacity, fuses, name plates consisting of 4 pole MCCBs and Contactors of capacity as recommended by the manufacturer. Detachable cable gland plates, all controls, indicators and standard standard microprocessor based LED/LCD display for indicating voltage, current, frequency, speed, kW, kWH, pf, temperature, Battery voltage, etc AMF Controller (1) Annunciationwith indication lamps for :- i. Low lub oil pressure, ii. High Water Temperature, iii. Engine over speed, iv. Battery low voltage Controls (2) Load on Indication (3) Load off indication(4) Engine start push button(5) Engine stop push button(6) Fault accept / reset push button(7) Battery Charger :-i. Transformer ii. Rectifier iii. Resistanceiv. DC Volt meter v. DC Ammeter vi. Charger rate selector switch 5 (D) Batteries: Two nos maintenance free batteries of 12 volts 180 AH capacity with multi stranded copper conductor cable of suitable size from battery to starter and from Control panel (E) Control Panel: The control system is an integrated microprocessor based generator control system providing voltage regulation, engine protection alternator protection, operator interface and isochronous governing.(F) Base frame - The Dg set engine and alternator mounted on common base frame with anti vibration pads as per manufacture recommendations.(G) Fuel tank –Fuel tank made up of 3 mm thi k HR sheet with calibrated level marking arrangements with fuel gauge stop cock, drain plug with capacity of tank approx 385Ltrs & DEF Tank Capacity (L) 60Ltrs.(H) Acoustic enclosure - Enclosure is free standing floor mounting type factory built modular in construction to facilitate easy assembly at work site and will be drop over housing type and easy access for maintenance and repairs and operation with following facilities. (1) Rugged construction maintenance free. (2) CRCA sheets for enclosure with high quality insulation materials to be used as per IS 8183 for maximum sound absorption. (3) The sheet metals treated with anti resistive solutions before painting and painted with pure polyester powder epoxy paint in outer side for better weather resistance. 6 (4) Well designed ventilation system to be provided to pump up the heat in the chamber. (5) Provide selling with special type of gaskets, frame rubbers on doors/frames for better weather protection.(6) Necessary provision for cable entry/ bus ducts and fuel line, control cables as per requirement. (7) A see through transparent glass/acrylic window in front of engine control panel to be provided for monitoring the parameters.(8) In inside the enclosure provide 12 volts LED light fitting two nos for inside illumination. (9) Necessary mounting bracket for batteries inside the enclosure.(10) The emergency stop push button provided in acoustic enclosure near Instrument panel side. (11) Work space is to be provided around the equipment for easy maintenance by the manufacturer. Notes: Unit rate quoted by the contractor shall deemed to be inclusive for the following:- (a) The contractor shall provide the artificial load, fuel, oil etc for testing the DG set at site and the cost it’s deemed to include in the quoted rate.(b) All civil works for making good the disturbed surface during installation. (c) The DG Set should comply with all the latest CPCB-IV + Norms including latest amendment issued upto the date of receipt of tender. 7 Supply, install and commissioning of Factory assembled Silent DG set with AMF panel of capacity 400KVA/320kW, 1500 RPM, Turbo Charged, water cooled comprising of suitable Engine with microprocessor based Genset controller with silencer and canopy for soundless mode (sound level not exc level specified by central pollution control board) and alternator both mounted on a common base frame conforming to ISO and IS-10002 rated for 415 volts 50 cycles, 0.8 Power factor (PF) complete residential silencer, AVM pads, battery with its leads, first fill of lub oil and all engine accessories such as self starter, alternator/dynamo with suitable coupling and base frame on foundation as recommended by the manufacturer and consisting of electrical components and maintenance free cable lead with terminal, all mounting accessories complete all as specified and directed comprising with the following. Make of DG set assembled with sound proof canopy - greaves cotton ltd,pune, Cummins, Ashok Leyland, Kirloskar 8 (a) Engine :(a) Vertical inline multi cylinder in accordance with BS-5514/IS-1002 at 1500 RPM including the following accessories :-(i) Fuel tank (Suitable for capacity for minimum 12 Hrs run).(ii) Fuel filter(iii) Lub oil filter.(iv) Lub oil cooler.(v) Dry type/ Oil bath type air cleaner.(vi) Exhaust Silencer (Industrial type).(vii) Fly wheel with starting ring.(viii) Expansion bellows.(ix) Exhaust gas turbocharger. (x) 24 Volt electric starter with 02 No maintenance free battery of suitable capacity.(xi) Battery charging alternator.Make: Greaves Cotton 9 (b) Alternator: (i) Alternator, 3 phase, 415 Volts, 50 Hzs, 0.8 PF, 1500 RPM self excited, self regulated, screen protected, drip proof alternator of capacity 400 KVA conforming to BSS 5000 (part 99) with insulation class H, single bearing and automatic voltage regulator accessories.Make: CG / Stamford. 10 (c) Acoustic Enclosure: (i) Acoustic enclosure as per latest CPCB IV+ norms(ii) Air inlet louvers specially designed to operate at rated load even at 50 deg C air inlet temp.(iii) Powder coated for long lasting service life and superior finish.(iv) Insulation material meets exacting IS 8183.(d) Accesories: (i) Base frame fabricated from CRCA sheet of suitable thickness as per manufacturers design.(ii) Storage battery of suitable capacity as per manufacturers instruction mounted on angle iron frame of suitable size as directed. 11 (e) Instrument Panel: The Genset controller as per manufacturers/OEM design complete with internal wiring, bus bar etc and fitted with the accessories as per OEM recommended.(f) AMF Panel: The AMF panel shall be separate panel outside of Acoustic enclosure indoor type and made of CRCA sheet duly fabricated and powder coated and complete with internal wiring, Aluminum bus bar etc and fitted with the following accessories : (i) Power contactor of 4 Pole 700A - 02 No’s(ii) DN Base HRC Fuse HN type – 630A - 3 No’s & HRC Base HB type -800.(iii) Current Transformer of size – 700/5A – 3 No(iv) Indicating lamps (LED type) (R-Y-G) – 01 set (vi) Relay, timer and other accessories as per manufacturer.Note: Quoted rate should inclusive of testing of DGSET. 12 Taking down aluminium strip of any size and Supply & fix aluminium strip 25mm x 4mm complete with saddles and fixing screws for fitting the strip. Complete all as specified and directed. 13 Taking down old earthing and M&L for earthing complete with galvanised steel earth plate electrode 60cm X 60cm X 6mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below normal ground level connected to galvanized strip 25 X 4mmby means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 of SSR Part-I connected to OH conductor on pole/ Panel/ main switch board etc all as specified or indicated and testing on completion including provision galvanized strip protected by 40 mm bore, light grade pipe and watering pipe shall be 20 mm bore medium grade GI pipe including excavation & earth work, PCC pit with RCC cover, charcoal, salt, funnel, GI strip and protection pipe upto 7.5 mtr complete all as specified and directed. 14 Supply and lay cable XLPE insulated screened PVC bedded galvanized steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with standered aluminium conductor of following sizes 240 sqmm 3.5 Corecomplete all as specified and as directed 15 Supply and lay cable XLPE insulated screened PVC bedded galvanized steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with standered aluminium conductor of following sizes 300 sqmm 3.5 Corecomplete all as specified and as directed. 16 Taking down GI pipe of any size and Supply and fixingof GI tubing, light grade, 80 mm bore with all fitting lais in trenches / pole / wall for protection of cables in repairs. Complete all as specified and directed. 17 Supply and fixingof GI tubing, light grade, 100 mm bore with all fitting lais in trenches / pole / wall for protection of cables in repairs Complete all as specified and directed. 18 Excavation in trenches in soft/loose soil not exceeding 1.5 metre wide and exceeding 1.5 metre but not excedding 3.0 metre in depth for route of cable and getting out complete all as specified and as directed 19 Returning, filling in soft/loose soil including spreading, leveling, watering and well ramming, in layers not exc 25 cm complete all as specified and as directed 20 Removingof surplus soil to a distance not exc. 50 meter and depositing where directed at a level not exc.1.5 metre above the starting point complete all as specified and as directed 21 Supply, laying riddled earth soil for cushioning to cables with a layer of riddle earth soil 15cm deep before laying the cable and 8 cm depth after laying of cable, Complete all as specified and directed. 22 M & L for sub class ‘B’ bricks, laid in trenches as cable covers / protectioncomplete all as specified and directed. 23 Disconnecting all electrical connections,earthing connection complete in all respect & dismantling the existing DG set of capacity 400 KVA/250 KVA including AMF panel, oil tanks & transporting it to the MES yard complete all as specified and directed.Note:-All tools and plants and transportation required for shifting/dismantling required is deemed to be included in the quoted rate. 24 Material and labour for boring of holes under road, pavement hard standing by trenchless technology using ultra sound technique and necessary suitable for0.4 mpa working pressure. Complete all as specified and directed.

BRR:8660017 Supply Of Supply Of Tension Insulator Rod -2500 Of Short Neutral Assembly [Ptfe] Gf-2500 {One Set Consisting Of 04 Pieces Of Tension Insulator Rod} As Per Rdso Spec.No. Ti/ Spc/Ohe/Sns/0000 Rev.1 Slip A&C Slip No.1.Supply Of Tension Insulator Rod -2500 Of Short Neutral Assembly [Ptfe] Gf-2500 {One Set Consisting Of 04 Pieces Of Tension Insulator Rod} As Per Rdso Spec.No. Ti/ Spc/Ohe/Sns/0000 Rev.1 Slip A&C Slip No.1.,Supply Of Tension Insulator Rod -2500 Of Short Neutral Assembly [Ptfe] Gf-2500 {One Set Consisting Of 04 Pieces Of Tension Insulator Rod} As Per Rdso Spec.No. Ti/Spc/Ohe/Sns/0000 Rev.1 Slip A&C Slip No.1. ]

BRR:8659451 Supply Of Ptfe Thread Sealant Tape (Ptfe) Size 25.4 Mm Wide X 0.075 Mm Thick In Roll Of 12 Mtrs.Ptfe Thread Sealant Tape (Ptfe) Size 25.4 Mm Wide X 0.075 Mm Thick In Roll Of 12 Mtrs.,Ptfe Thread Sealant Tape (Ptfe) Size 25.4 Mm Wide X 0.075 Mm Thick In Roll Of 12 Mtrs. As Per Is 14643/1999 Make Champion, Kohi Noor Or Similar. [ Warranty Period: 30 Months After The Date Of Delivery ] [Quantity Tolerance (+/-): 5 %Age , Item Category : Normal , Total Po Value Variation Permitted: Max 8 Lacs ] ] Admm (Els) Vta, Wr Gujarat 1088.00 Numbers => Limited

BRR:8659450 Supply Of Ptfe Thread Sealing Tape Size 12Mm Wide X 0.075 Mmptfe Thread Sealing Tape Size 12Mm Wide X 0.075 Mm,Ptfe Thread Sealing Tape Size 12Mm Wide X 0.075 Mm Thick Length Per Roll Of 12 Mtrs. Is-14643-1999 Amendment No.1 July 2022 [ Warranty Period: 30 Months After The Date Of Delivery ] [Quantity Tolerance (+/-): 5 %Age , Item Category : Normal , Total Po Value Variation Permitted: Max 8 Lacs ] ] Admm (Els) Vta, Wr Gujarat 1822.00 Numbers => Limited

BRR:8654745 Supply Of 1) Ureteric Guide Wire With Ptfe Coating And Soft Flexible1) Ureteric Guide Wire With Ptfe Coating And Soft Flexible,Srphc530246-Ureteric Guide Wire With Nitinol Core Having Twin Coloured Teflon Sleeve For Better Visualisa Tion With Hydrophilic Floppy Tip With The Multiple Advantage For Access Handling & Flexible Ureteroscopic Pase Having Outer Diameter 0.032 And Length 150Cm. Unit:Noaccess, Handling & Flexible Ureteroscopic Passage Having Outer Diamet Er 0.032 And Length 150Cm.Unit:No The Item May Be Supplied With Brand: Terumo India Pvt Ltd/Blueneem/Medinova Or Similar. ] , Srphc530250-Ureteric Guide Wire With Ptfe Coating And Soft Flexible J Shaped Tip For Flexible Ureteroscopi C Pase Having Outer Diameter 0.035 And Length 150Cm. Unit:No The Item May Be Supplied With Brand: Terumo India Pvt Ltd/Blu Eneem/Medinova Or Similar. ] , Srphc530251-Ureteric Guide Wire With Ptfe Coating And Soft Flexible J Shaped Tip For Flexible Ureteroscopi C Pase Having Outer Diameter 0.032 And Length 150 Cm. Unit:No The Item May Be Supplied With Brand: Terumo India Pvt Ltd/Blu Eneem/Medinova Or Similar. ]

BRR:8653388 Supply, Installation And Commissioning Of Fully Automatic Goniometer , Supply, Installation And Commissioning Of Fully Automatic Goniometer , Fully Automatic Goniometer ( Parameter 1 To 9 & 11) , 10. Portable Liquid Temperature Control Unit For Use With A Liquid Circulator. Temperature Setting By Liquid Circulator. , 12. Consumables , • Glass Syringe , • 3 Ml Disposable Syringes Set Of 100 Pcs , • Disposable Needle, Stainless Steel, With Pp Luer-Lock Connector, Diameter: 0.5 Mm, Length:38 Mm, Set Of 50 Pieces , • Disposable Needle, Pp, With Pp Luer-Lock Connector, Set Of 25 Pieces , • Disposable Needle, Ptfe, With Pp Luer-Lock Connector, Set Of 50 Pieces , • Manual Syringe: 1 Ml Volume With Continuously Adjustable Precision Syringe , • Quartz:Cuvette: (Optical Grade) , •Calibration Kit For Both Sessile Drop (Contact Angle) And Pendent Drop (Surface Tension). , • One Number Manual Dosing System , 16. Computer , 17. Standard 5 Kva Compact Ups With 1 Hour Power Backup, With Compact Battery Racks And Required Cables From The Main Unit. , 18. Laserjet Printer - A Standard Laserjet Duplex Color Printer , Non-Comprehensive Annual Maintenance Chargesfor1st Year After The Warranty Period Of 3 Years , Non-Comprehensive Annual Maintenance Chargesfor 2Nd Year After The Warranty Period Of 3 Years , Non-Comprehensive Annual Maintenance Chargesfor 3Rd Year After The Warranty Period Of 3 Years , Non-Comprehensive Annual Maintenance Chargesfor 4Th Year After The Warranty Period Of 3 Years , Non-Comprehensive Annual Maintenance Chargesfor 5Th Year After The Warranty Period Of 3 Years

BRR:8651610 Supply Of Supply & Installation Of Abel Flash Point Apparatus For Determination Of Low Flash Point Of Petroleum Products, Solvent, Oil And Mixtures With Copper Water Jacket Digital Indicator, Motorized Stirrer, Electrically Heated, Gas Pilot Flame System Along With Gas Cylinder & Copper Coil Voltage Variac As Per Ip-33, Ip-170, Is 1448/Part 20 : 2024 (Iso:13736/2021) Or Latest. Apparatus Should Have The Provision To Insert Thermometer To Read The Temperature And A Calibrated Thermometer Should Be Provided With The Apparatus. (Technical & Standard Accessories As Per Attached Annexure- A). Make: Power And Electricals Co-Kolkata Or Equivalent.Supply & Installation Of Abel Flash Point Apparatus For Determination Of Low Flash Point Of Petroleum Products, Solvent, Oil And Mixtures With Copper Water Jacket Digital Indicator, Motorized Stirrer, Electrically Heated, Gas Pilot Flame System Along With Gas Cylinder & Copper Coil Voltage Variac As Per Ip-33, Ip-170, Is 1448/Part 20 : 2024 (Iso:13736/2021) Or Latest. Apparatus Should Have The Provision To Insert Thermometer To Read The Temperature And A Calibrated Thermometer Should Be Provided With The Apparatus. (Technical & Standard Accessories As Per Attached Annexure- A). Make: Power And Electricals Co-Kolkata Or Equivalent.,Supply & Installation Of Abel Flash Point Apparatus For Determination Of Low Flash Point Of Petroleum Prod Ucts, Solvent, Oil And Mixtures With Copper Water Jacket Digital Indicator, Motorized Stirrer, Electrically Heated, Gas Pilot Flame System Along With Gas Cylinder & Copper Coil Voltage Variac As Per Ip-33, Ip-170, Is 1448/Part 20 : 2024 (Iso:137 36/2021) Or Latest. Apparatus Should Have The Provision To Insert Thermometer To Read The Temperature And A Calibrate D Thermometer Should Be Provided With The Apparatus. (Technical & Standard Accessories As Per Attached Annexure- A) . Make: Power And Electricals Co-Kolkata Or Equivalent.Note: Valid Calibration Certificate Of Validity One Year Issued From Na

BRR:8651593 Supply Of Pensky Marten Flash Point Apparatus As Per Ip -34 , Astm D-93 & Is 1448(P-21). Electrically Heated Model With Digital Temperature Control. Motorized Geared Stirrer For Stirring The Cup Sample. Sample Cup With Flame Device And Shutter Arrangement. Reducing Socket With Cock For Gas Jet Test Flame. Also Fitted With Voltage Variac And Rpm Counter. Make: Power And Electrical/Pic Or Similarpensky Marten Flash Point Apparatus As Per Ip -34 , Astm D-93 & Is 1448(P-21). Electrically Heated Model With Digital Temperature Control. Motorized Geared Stirrer For Stirring The Cup Sample. Sample Cup With Flame Device And Shutter Arrangement. Reducing Socket With Cock For Gas Jet Test Flame. Also Fitted With Voltage Variac And Rpm Counter. Make: Power And Electrical/Pic Or Similar,Pensky Marten Flash Point Apparatus As Per Ip -34 , Astm D-93 & Is 1448(P-21). Electrically Heated Model With Digital Temperature Control. Motorized Geared Stirrer For Stirring The Cup Sample. Sample Cup With Flame Device An D Shutter Arrangement. Reducing Socket With Cock For Gas Jet Test Flame. Also Fitted With Voltage Variac And Rpm Counte R. Make: Power And Electrical/Pic Or Similar [ Warranty Period: 30 Months After The Date Of Delivery ] ]

BRR:8651384 Repairing Of Different Ducts And Replacement Of Nonmetallic Bellows And Servicing Of Associated Gates Dampers Actuators During Upcoming Overhauling Unit 1 Sgtpp- 1 O/H OF DUCT, DAMPER, EXP BELLOWS OF U#1:REPAIRING OF AIR /FLUE DUCTS AND BRACINGPIPES AT ECO O/L & OTHER DUCT AS PER SCOPE OFWORK. 2 REPLACEMENT OF CLOTH TYPE EXPANSIONBELLOW: Size 2750x1720mm, having Total length 10500mmwidth 270mm, Design Temperature # 338 deg. c, Pressure1650mmWC, Material of Construction # Four layers with each ofWoven glass Fabric, Needled Glass felt, PTFE Foil, Both sideElastomer coated glass fabric. Used in Hot PA at APH Outlet). 3 REPLACEMENT OF CLOTH TYPE EXPANSIONBELLOW: Size 1700x2400mm, having Total length 10150mmwidth 465mm, ,Material of Construction # Four Layers with each of Woven glass Fabric, Needled Glass felt, PTFE Foil Both sideElastomer coated glass fabric. Used in Hot PA Outlet in thehorizontal legs before entry to Hot PA Header (Between FD& PAFan Area). 4 REPLACEMENT OF CLOTH TYPE EXPANSIONBELLOW: Size 6108X3542 MM, having total length 22000 MM,Width 235 MM,design temperature 128 DegC, Pressure 2050MMWc, material of construction Buto EP, resin bonded glass feltencased in ss wire & glass fabric. Used in APH outlet convergentflue duct. 5 REPLACEMENT OF CLOTH TYPE EXPANSIONBELLOW: Size 3200X3000 MM, Having total length 14300 MM,Width 300 MM, design temperature 128 DegC, pressure 2050MMWC,material of construction Buto EP, resin bonded glass feltencased in ss wire mesh & glass fabric used in flue duct. Used influe duct before and after ESP. 6 REPLACEMENT OF CLOTH TYPE EXPANSION BELLOW AS TABULATED BELOW: Non Mettalic ExpansionJoint Fabric Cloth for joint size 9000X2000MM, having total length 24600MM, width 212MM, design temperature 128DEG.C, pressure 2050MMWC,expansion axial 23MM &lateral 10MM,material of construction BUTO EP, resin bonded glass felt encased in SS wire mesh & glass fabric. Used in APH Outlet flue duct just before convergent duct in the verticle direction at around 8.5M elevation 7 REPLACEMENT OF CLOTH TYPE EXPANSIONBELLOWS: Non Metallic Expansion Joint Fabric Cloth for jointsize 6714X3820MM, having total length 23800MM,) width290MM, design temperature 344DEG.C ,pressure475MMWC,expansion axial 30MM &lateral 30MM,material of construction woven glass fabric, needled glass felt, PTFEFOIL, both side ELASTOMER coated glass fabric,SUPER WOOL& RESIN BONDED glass felt encased in ss wire mesh & wovenglasss fabric. Used in SA line at APH OUTLET 8 REPLACEMENT OF CLOTH TYPE EXPANSIONBELLOW: NON METALLIC EXPANSION JOINT FABRICCLOTH FOR JOINT SIZE 2750X1720MM, HAVING TOTALLENGTH 10500MM, WIDTH 245MM, DESIGN TEMPERATURE50DEG.C, PRESSURE 2050MMWC, EXPANSION AXIAL 30MM& LATERAL 30MM, MATERIAL OF CONSTRUCTION BUTOEP, RESIN BONDED GLASS FELT ENCASED IN SS WIREMESH & GLASS FABRIC. USED IN COLD PA LINE AT APHINLET. 9 REPLACEMENT OF CLOTH TYPE EXPANSIONBELLOW: NON METALLIC EXPANSION JOINT FABRICCLOTH FOR JOINT SIZE 3820X3500MM, HAVING TOTALLENGTH 17000MM, WIDTH 455MM, DESIGN TEMPERATURE344DEG.C, PRESSURE 475MMWC, EXPANSION AXIAL 70MM& LATERAL 50MM,MATERIAL OF CONSTRUCTION WOVENGLASS FABRIC, NEEDLED GLASS FELT, PTFE FOIL, BOTHSIDE ELASTOMER COATED GLASS FABRIC,SUPER WOOL &RESIN BONDED GLASS FELT ENCASED IN SS WIRE MESH& WOVENGLASS FABRIC. USED IN SA LINE AT Y AFTERAPH.OF CONSTRUCTION RESIN BONDED GLASS FELTENCASED IN SS WIRE MESH & WOVEN GLASS FABRIC.USED IN FLUE DUCT HEADER BEFORE ESP INLET 10 REPLACEMENT OF CLOTH TYPE EXPANSIONBELLOW: NON METALLIC EXPANSION JOINT INSULATIONBOLSTER FOR JOINT SIZE 4000X5000 MM HAVING TOTALLENGTH 18200MM, WIDTH 160MM, HEIGHT 100MM,DESIGN TEMPERATURE 128DEG.C, PRESSURE 2050MMWC,EXPANSION AXIAL 12MM & LATERAL 23 MM, MATERIAL 11 REPLACEMENT OF CLOTH TYPE EXPANSIONBELLOW:NON METALLIC EXPANSION JOINT FABRICCLOTH FOR JOINT SIZE 6714X3820MM, HAVING TOTALLENGTH 23550MM, WIDTH 225MM, DESIGN TEMPERATURE50DEG.C, PRESSURE 450MMWC, EXPANSION AXIAL 30MM& LATERAL 30MM, MATERIAL OF CONSTRUCTION BUTOEP, RESIN BONDED GLASS FELT ENCASED IN SS WIREMESH & GLASS FABRIC. USED IN SA LINE AT APHINLET. 12 Only Cloth replacement at ID Fan suctionbellow Size # 1750x3100 13 Only Cloth replacement at ID Fan suctionbellow Size # 2220 x 2495. 14 Repairing of cloth type Bellows by patchwork. 15 Repairing of Metallic Expansion Bellowsby Run welding 16 Run welding for patch work/repairing ofwork where no new plate is required. 17 REPLACEMENT OF METALLIC EXPANSION JOINT,DUCT SIZE : D1700X2400 at HOT PA Duct. 18 Replacement of metallic expansion bellowf Economiser outlet. 19 Servicing of Seal air fan suction(dampers, actuators as tabulated below as per scope of work(01Motorised+01 Manual). 20 ID Fan suction Damper (2 nos 4 blade( dampers = 1 set). 21 Servicing of PA Fan InterconnectionDamper. 22 Servicing of FD Fan Discharge Damper 23 Servicing of FD Fan InterconnectionDamper. 24 Servicing of APH O/L PA damper 25 Servicing of APH I/L PA damper 26 Servicing of APH Outlet SA Damper( 4 Blade Dampers= 1 Set). 27 Servicing of APH Inlet SA Damper( 4 Blade Dampers= 1 Set). 28 Servicing of ID Fan Inlet Gates 29 Servicing of ID Fan O/L Gate 30 Servicing of ESP Inlet & OutletGuillotine Gate 31 Servicing of Seal Air Supply to MillValve Actuator 32 Servicing of ID fan Suction & dischargeside (Guillotine Gate Actuator). 33 Servicing of PA Fan Discharge GateActuator. 34 Servicing of PA Fan Discharge Gate LockActuator. 35 Servicing of PA Fan Discharge ductInterconnection ( Damper Actuator). 36 Servicing of FD Fan Discharge DamperActuator. 37 Servicing of PA Damper At APH Inlet& Outlet. 38 Servicing of SA Damper At APH Inlet& Outlet. 39 Servicing of ESP Inlet & OutletGuillotine Gate ( Actuator). 40 Servicing of FD Fan Discharge DuctInterconnection Damper Actuator 41 Cleaning of accumulated ash inside& outside of Duct 42 REPAIRING OF FLUE DUCTS AND BRACINGPIPES BETWEEN ECO O/L HOPPER AND APH Hot End ASPER SCOPE OF WORK

BRR:8650611 Bids Are invited for Loctite 243 In 50 Ml Pack , Wire Brush With Plastic Handle - Wire Brush With Plastic Handle With Specifications Total Length 11 Inche Brush 6Inch Handle 5Inch Brush Width 2Inch Bristle Length 1 Pt 25Inch Each Bristle Contains 10Wires Of 0 Pt 5Mm Dia Made Of Hardened Ms Material Bristle Rows 18X7nos , Measuring Tape Of 5 Meters Length With Belt Lock - Measuring Tape Of 5 Meters Length With Belt Lock Of Freemans Make , Coated Abrasive Or Emery Paper 80 Grit Of Size 1Mtr X 100Mm Of Make 3M - Coated Abrasive Or Emery Paper 80 Grit Of Size 1Mtr X 100Mm Of Make 3M Taparia Norton Deerfos Or Equivalent , 4 Inch Green Colour Cut Off Wheel - 4 Inch Green Colour Cut Off Wheel Compatible To 4 Inch Angle Grinder For Metal Cutting Of Make Yuri Or Bosch Or Hitachi , Hss Drill Bit Of 5 Mm Dia Of Bosch Make , Hss Drill Bit Of 6 Mm Dia Of Bosch Make , Hss Drill Bit Of 8 Mm Dia Of Bosch Make , Hss Drill Bit Of 10 Mm Dia Of Bosch Make , Ptfe Thread Seal Tape - Ptfe Thread Seal Tape Specification 19Mmx0 Pt 1Mmx12mtrsx0 Pt 5G Per Cm3 Make Shalimar Or Kohinoor Or M Seal Or Equivalent Premium Quality Brand , Heavy Duty 4 Inch X 15 Mtr Blue Color Tape For Patch Work Of Seat Covers , Aluminium Pop Rivet Of Size 4Mm Dia X 13Mm Length , Leather Hand Gloves For Welding , Stainless Steel Welding Electrode Packed In 2 Kgs Packet Of Size 2 Pt 50 Mm X 350 Mm - Stainless Steel Welding Electrode Packed In 2 Kgs Packet Of Size 2 Pt 50 Mm X 350 Mm Vacuum Pack Model No 308Lmake Esab Or Mangalam Or Ador Or Tata Agrico Of Isi Mark Of Suitable Make , Mild Steel Covered Electrodes Of Classification E6013 Confirming Is 814 2014 Of Size 3 Pt 15 Mm X 350Mm - Mild Steel Covered Electrodes Of Classification E6013 Confirming Is 814 2014 Of Size 3 Pt 15 Mm X 350Mm Packed In 5 Kg Or Suitable Weight Pocket Or Equivalent , Painting Brush 100 Mm - Painting Brush 100 Mm Width With Nylon Bristles Double Layer Of First Quality And Mfg By Branded Co , Paint Brush 25 Mm Wide Best Quality , Rug Cloth Co

BRR:8649862 Bids Are Invited For Ed6061d X300055 - Fuse Series Psc Type 6 6 Urd 30 Tt F 0200 , Ed6061d Gsm141 003F4dn6 2 - Stainless Steel Lock Tab Washer Dn6 , Ed6061d 46014A01000 - O Ring 5330Bb 10X1 8 20A8 , Ed6061d 487095 - Stop , Ed6061d 488195 - Adjusting Shim , Ed6061d 5310Mb Dn27 - Stainless Steel Lock Tab Washer Dn27 , Ed6061d Ej353 0 3 - Seal Ui 480/528X22 , Ed6061d 18Rt000r28341 - Hydrauxim Valve 10 2 , Ed6061d 424 1033 - Spring , Ed6061d 424 1036 - Axis , Ed6061d 522 0142 - Sealed Valve Isolating Ring , Ed6061d Mat424 0936 Rep164 - Gasket 20X10x2 , Ed6061d Mat424 0936 Rep170 - Lock Washer 95X58x1 5 , Ed6061d Mat424 0936 Rep172 - Gasket 81X64 Th 3Mm , Ed6061d 3031 0232 0001 - O Ring Package Electronics Housing Cover , Ed6061d 3031 0233 0001 - O Ring Package Electronics Housing Module , Ed6061d 3031 0234 0001 - O Ring Package Process Flange , Ed6061d Sp0265900 - Tricoclair Pipe D 7 13 , Ed6061d Sp0265911 - Tricoclair Pipe D 10 16 , Ed6061d 43 25 12 2 - Impeller Nut 29 , Ed6061d U2ek 0550 - Mechanical Seal Type U2ek 0550 9Kay 93 , Ed6061d 188487 - O Ring 8 00X2 65 64C8 , Ed6061d E22 177 - Parallel Key Shape A 6X6x28 Xc48 , Ed6061d S26 55968 0 - Interface Gasket Set , Ed6061d M853 0219F30 Rep1 - Folded Removable Filter , Ed6061d 316 2I10b1p28vcc - Relay 2Rt10a 28Vcc , Ed6061d Crb Hkms - Connector Retention Clip V , Ed6061d L22ban1o1ftj - Push Button Black 1O 1F , Ed6061d 489908 - Lip Seal , Ed6061d Iberc 999 0147 - Hose For Recharge Of Fresh Water For Extinguisher , Ed6061d Iberc 999 0149 - 9Lwater Fire Extinguisher Assembly , Ed6061d Ibval04p000 - Co2 High Rate Discharge Valve , Ed6061d Ibval20p001 - Electric/Manual Actuator , Ed6061d 810550 09 - Elastic Guard Ring , Ed6061d Mat865 0005 Rep3 - Seal 100 X 146 X 2 130 X 7 X 8 , Ed6061d 463227 - Gasket Made For Rubber , Ed6061d Mat166 0637F78 - Fluid Hose An 026 Nd25 Ruch Od26 67 And Free End L 2M , Ed6061d 49Rd000c001p1 - Interface Seal Kit 9 5X1 5X1 78 Fkm 80Sh , Ed6061d Mat166 0637F58 - Mc30 Oil Hose Peh16 Nd25 Nd 20 Guill +1 1/2 Union Bsp L 2 M , Ed6061d 487088 - Fitted Screw , Ed6061d 11 0272 - Plunger Pipe 30/43 , Ed6061d 00038530540A - Heating Element 540W (Plate 385Mm) , Ed6061d 00038530960A - Heating Element 960W (Plate 385Mm) , Ed6061d 07Hdc18nr75 - Fan Blade , Ed6061d V75a - V Ring Seal V75a , Ed6061d 28 24X2 62Pc851 - O Ring 28 24X2 62 20A8 , Ed6061d 290 00X3 00Pc851 - O Ring 290X3 , Ed6061d 446 0307 F8 - Pin , Ed6061d Ax 55 78 - Needle Roller Thrust Bearing , Ed6061d E27625 80Axt - Washer Dic M8 , Ed6061d Gr6900500 T10 - Slydring Guide Ring Diam 55X50x2 5 Turcite T10 , Ed6061d Gr6900650 T10 - Slydring Guide Ring Diam 60X65x2 5 Turcite T10 , Ed6061d E27489 - Spring Pin E4 16 Steel , Ed6061d J20004 - Copper Gasket , Ed6061d M576 0035 - Locking Plate Stainless Steel 1 4541 , Ed6061d Prj2256 119 - Anti Extrusion Ring Diam 59X65 Th1 3 Ptfe Ms28774 , Ed6061d Prj2256 166 - Gasketdia 8 2 X Dia 11 4 Th 1 , Ed6061d Pto200650 T10n - Glydring Seal Diam 65 Turcite T10 + O Ring 227 8307 , Ed6061d Rk2 - Check Valve , Ed6061d Jo270 - Copper Seal 27 3X32x1 5 , Ed6061d Prj0891 105 - Copper Seal 14X18 5X1 5 , Ed6061d Prj0891 121 - O Ring 34 6X2 4X39 4 , Ed6061d Prj0891 128 - O Ring 16X3x22 Nbr 90 Sh , Ed6061d Prj0891 133 - O Ring 30X3x36 , Ed6061d Prj0891 138 - Magnetic Level Switch , Ed6061d Prj0891 139 - Seal Quad Ring 21 82X3 53 , Ed6061d Prj0891 18 - Cover Seal , Ed6061d Prj0891 22 - Piston Seal , Ed6061d Prj0891 46 - Sealing Washer , Ed6061d Prj0891 80 - Cover Seal , Ed6061d Prj0891 82 - Seal 64 5X3 Thick 1 70 Sh , Ed6061d Prj0891 91 - Spring 12 5 0 8 47 7 5 , Ed6061d 487580 - Adjusting Shim , Ed6061d 37983C - Seal Set O Ring+Back Up , Ed6061d 100245550 - Ball Bearing Part 200 , Ed6061d 70038318 - Washer 1554 1 , Ed6061d 5646A2v - Double Pole Miniature Toggle Switch , Ed6061d I11531m600 - Inclinometer , Ed6061d I11533m400 - Tias Board , Ed6061d Lcn22 8951 2 Tj - 2 Postions Rotary Switch , Ed6061d 484255 - Central Pusher Unit , Ed6061d 50Pp000c0067 - Manometer Inox Bh Nd100 Type A 0 4 Bar , Ed6061d Fvm34dnxnsn - Absolute Pressure Switch , Ed6061d 21 47545 - Detector , Ed6061d Mat658 0053 Exp Rep100 - Overmouled Electrode Unit Ref 100 , Ed6061d 5310Mdrondnl14ac - Steel Safety Washer De14 , Ed6061d 33 07 02 019E 30 00X2 65 - O Ring 30 00X2 65 20A8 An , Ed6061d 5331143135487 - O Ring 24 60 X 3 60 20A8 Gn , Ed6061d 930930025516 - Annealed Copper Flat Gasket 27 2 X32 X 1 5 , Ed6061d 5330143568781 - Ruch Sealing Ring Od26 67 , Ed6061d 5330144253969 - Sealing Ring For 316L Ruch (Nd10) , Ed6061d Stf33 07 02 034E De33 4 - Ruch Sealing Ring Od33 40 , Ed6061d 43 14 13 - Mechanical Seal Sleeve X2crnimo 17 12 2 (4) , Ed6061d 43 14 34 - Wear Ring X2crnimo 17 12 2 (9) , Ed6061d 779 001 - Epoxy Glue , Ed6061d Hsttpn50 713 Q - Clear Heat Shrink , Ed6061d Mat454 0213 - Valve Gasket , Ed6061d Smb 324234 18Sc273d00012 - Ap Hoisting Lowering Control Solenoid Valve Total Quantity : 973

BRR:8649672 Bids Are invited for 0303Bbh0001kt,Oil Filter With O Ring - 0303Bbh0001kt , 0306Gbh00041n,Belt Alternator - 0306Gbh00041n , 0306Gbh00171n,Drive Belt Ac - 0306Gbh00171n , 0307Cbh00061n,Starter Motor - 0307Cbh00061n , 0311Aau00020n,Oil Seal Rear Ptfe - 0311Aau00020n , 0313Abh00131n,Filter Air Cleaner - 0313Abh00131n , 0403Abb00701n,Shock Absorber Assy Front- 4Wd - 0403Abb00701n , 0403Adg00271n,Shock Absorber Rear - 0403Adg00271n , 0501Caa00241n,Universal Joint Assy Propeller Shaft - 0501Caa00241n , 0501Caa00251n,Universal Kit Assy Front Propeller Shaft - 0501Caa00251n , 0603Aaa00640n,Disc Brake Frt - 0603Aaa00640n , 0603Aaa00650n,Disc Brake Rear - 0603Aaa00650n , 0603Baa00011n,Caliper Assy Front Rh - 0603Baa00011n , 0603Baa01591n,Caliper Assy Front Lh - 0603Baa01591n , 0603Baa01601n,Caliper Assy Rear Rh - 0603Baa01601n , 0603Baa01611n,Caliper Assy Rear Lh - 0603Baa01611n , 0603Bab0062kt,Kit Pad Frt Caliper - 0603Bab0062kt , 0603Bab0067kt,Kit Pad Rear Caliper - 0603Bab0067kt , 0607Aaa01581n,Booster Brake Assy - 0607Aaa01581n , 0801Caa01501n,Clutch Cover And Disc Assy - 0801Caa01501n , 0802Caa07461n,Concetric Slave Cylinder Bleeder - 0802Caa07461n , 0802Caa08591n,Clutch Master Cylinder - 0802Caa08591n , 0802Caa08861n,Concentric Slave Cylinder - 0802Caa08861n , 0603Bab02850n,Disc Pad Kit - 0603Bab02850n , 0801Baa01421n,Clutch Disc Assy - 0801Baa01421n , 0801Ca0341n,Clutch Cover Assy - 0801Ca0341n , 0306Gam00251n,Belt - 0306Gam00251n , 0306Gam00261n,Belt Qmt 4Pk 1171 - 0306Gam00261n Total Quantity : 90

BRR:8648305 Work Of Supply Of Chemical, Glasswares, Consumables And Bacteriological Items To Newly Setup Peenya Water Testing Laboratory Under Ee Qa Division - Iron Method (1) 1-10 Phenanthroline Method -1,10,Phenanthroline Monohydrate Ar, 5G,Acetone (Ar), 2.5 Ltr,Aluminum Potassium Sulfate Dodecahydrate 99%, 500 G,Ammonium Acetate Crystals (Ar), 500 G,Ammonium Hepta Molybdate (Ar), 500 G,Ammonium Persulphate, 250 G,Ascorbic Acid, 500 G,Chemical/ Reagents-Barium Chloride, Reagent-Ar, 500 G,Barium Diphenylamine Sulphonate (Ar), 25 G,Boric Acid. (Ar), 250 G,Bromocresol Green Dye (Ar), 25 G,Cadmium Metal Granules (Ar), 25 G,Total Hardness - Calcium Carbonate Ar, 500 G,Cdta,25 G,Chloroform (Lr), 100 Ml,Copper Sulphate Pentahydrate (A.R. Grade), 500 G,Curcumine Crystaline Powder (95%), 25 G,Disodium Edta , Dihydrate(Ar), 500 G,Disodium Hydrogen Ortho- Phosphate, Anhydrous, 250 G,Di-Sodium Tetraborate (Borax), Decahydrate (Lr), 250 G,Dpd-Reagent (N,N-Diethyl-P-Phenylenediamine Sulphate) (Ar), 25 G,Total Hardness - Eriochrome Black T Ar, 25 G,Eriochrome Cyanine - R, 25 G,Ethanol, Absolute Alchohol, 99.9 Percentage, 2.5 Ltr,Iron Method (1) 1-10 Phenanthroline Method -Ferrous Ammonium Sulphate Ar, 500 G,Filter Paper, Whatmann Grade No.1, 125 Mm Dia, Circular, 100 Nos/Pack,Formaldehyde 30 To 40%, 500 Ml,Iron Method (1) 1-10 Phenanthroline Method -Glacial Acetic Acid Ar, 500 Ml,Glycerol, Purified (Lr), 500 Ml,Hexamine. (Hexa Methylene Tetramine) (Ar), 100 G,Hexane (Ar), 500 Ml,Turbidity - Hydrazine Sulphate Ar, 100 Gm,Chemical/ Reagents-Hydrochloric Acid, Reagent-Ar, 500 Ml,Hydrogen Peroxide, 30 Percentage, 500 Ml,Iron Method (1) 1-10 Phenanthroline Method -Hydroxylamine Hydrochloride Ar, 500G,Iodine Resublimed (Ar), 100 G,Liquor Ammonia Solution, 500 Ml,Magnesium Chloride, Hexahydrate (Ar), 25G,Magnesium Salts Of Edta(Ar), 250G,Mercuric Sulphate (Ar),500G,Methyl Orange Indicator Powder, 25G,Methyl Red Ph Indicator Powder, 25G,Neda (N-1-Naphthyl Ethylenediamine Dihydrochloride) (Ar), 5G,Nitric Acid (Ar), 500 Ml,Ortho-Phosphoric Acid 85 Percentage (Ar), 2.5 Ltrs,Oxalic Acid, Dihydrate (Ar), 250G,Patton & Reeders Indicator Powder (Ar), 25G,Ph Paper Strips (0-14 Range),Ph-10 Buffer Tablets, 10 Tablets/Pack,Ph-4 Buffer Tablets, 10 Tablets/Pack,Ph-7 Buffer Tablets, 10 Tablets/Pack,Phenolphthalein Powder (Ar),25G,Potasium Iodate, 100G,Chemical/ Reagents-Potassium Chloride, Reagent-Ar, 500G,Potassium Chromate.99% (Ar), 500G,Potassium Dichromate (Lr), 500G,Potassium Dihydrogen Ortho-Phosphate (Ar), 500G,Potassium Hydrogen Phthalate, Ar Grade, 25G,Potassium Iodide (Ar),500G,Nitrate Method (2) Chromototropic Acid Method - Potassium Nitrate Ar, 500G,Potassium Permanganate. 99%(Ar), 500G,Salicylic Acid (Ar), 500G,Silica Gel, Self Indicating, Coarse, 500G,Filter Paper, Sterile, 47Mm, Gridded, 0.45U Nitrocelluose /Celluose Ester Filter Disc (100Nos/Pack)(Hawgo47s6),Oxidase Reagent, 100 Ml (Gordon-Macleod Reagent),Agar Powder, Bacteriological Grade, 500G,Beef Extract, Bacteriological Grade, 500G,Peptone, Bacteriological, 500G,Lactose, Bacteriological Grade, 500G,Eosin Methlylene Blue (Emb) Agar, 100G,Soybean Casein Digest Agar Powder, 500G,Chloride - Silver Nitrate Ar, 25G,Sodium Acetate Crystals, Trihydrate (Ar) , Anhydrous, 500G,Sodium Arsenite (Ar), 25G,Sodium Borate Decahydrate, 500G,Total Alkanity - Sodium Carbonate Ar, 500G,Chloride - Sodium Chloride Ar, 500G,Calcium Hardness - Sodium Hydroxide Ar, 500G,Sodium Hypochlorite Solution, 5 Ltrs,Sodium Meta Silicate, Nanohydrate (Lr), 500G,Calcium Hardness - Sodium Sulphate Ar, 500G,Sodium Sulphite Anhydrous, 5G,Sodium Thiosulphate, Pentahydrate (Ar), 250G,Stannous Chloride (Ar), 25G,Starch, Powder, Soluble, 25G,Sulphanilamide, 99 %(Lr), 500G,Total Alkanity - Sulphuric Acid Ar, 500Ml,Toluene Ar Grade, 500Ml,Isopropyl Alcohol, 2.5 Ltr,Paraffin Liquid Light (Petroleum Light) (Grm 1310), 500Ml,Sterile Cotton Swab (Himedia)100 Nos/Pack,Alluminium Foil Roll, 18 Meter,Brown Paper Sheets, 100 To 120 Gsm, Size 90X115cm, (500 Sheets/Ream),Chemical (Acid / Alkali) Resistant Gloves.,Dettol Antiseptic Solution, 500Ml,Dettol Liquid Hand Wash Solution, With Dispenser, 200Ml.,Dettol Liquid Hand Wash Solution, Refill Pack, 750Ml.,First Aid Kit.,Hand Sanitizer, 500 Ml,Lab Aprons. (Size 40/42),Lab Coats (Size L) Full Sleeve For Micro Biology.,Laboratory Detergent - Cleansol (Phosphate Free), 5 Ltr,Non Absorbent Cotton Roll,Oven Gloves (Heat-Resistant),Phenyl, Cleaning Solution, 5 Ltr,Rubber Bulb With Net For Titration Burette(Autoburette),Surgical Face Mask (100 Nos/Box), Disposable,Surgical Gloves, Nitrile Powder Free (100 Nos/Box).,Tissue Paper Box (2 Ply, 100 Wipes),Tissue Paper Roll (2 Ply),Towels Big Size (80Cmx140cm).,Towels Small Size (50Cmx80cm).,Disposable Biodegradable Dustbin Bags, 100 Bags/Unit,Disposable Footwear Covers For Micro Biology 100 Nos/Unit,Disposable Head Covers For Micro Biology 100 Nos/Unit,Beaker, 100 Ml,Borosilicate.,Beaker, 1000 Ml, Borosilicate,Beaker, 250 Ml, Borosilicate.,Beaker, 50 Ml, Borosilicate.,Beaker, 500 Ml, Borosilicate.,Bottle Cleaning Brush,Burette Stand.(Metal),Burette, 50 Ml Graduated With Gp Stop Cock, Class A,Burette-Amber 50Ml, Graduated With Gp Stop Cock, Class A,Burette-Borosilicate Automatic Titration Burette, Class A With 2 Ltr Glass Container.,Cadmium Reduction Column With Stand,Chemical Weighing Bottle With I/C Glass Lid 60 Ml, Borosilicate Squat Form,Conical Flask, 250 Ml, Class A, Borosilicate.,Conical Flask, 500 Ml, Class A, Borosilicate.,Cuvette - Glass10 Mm, For Spectrophotometer (2 Nos / Pack),Cuvette - Quartz,10Mm Square Shape, For Spectrophotometer,Desicator Set With Cover And Porceleinplate, Glass, 200Mm Dia,Desicator Set With Cover And Porceleinplate, Plastic, 250Mm Dia,Droper Bottle, Polyethylene, Clear, 125 Ml,Evaporating Dish With Spout, 100-110Mm Dia (100 Ml Capacity), Porcelain,Funnel 75 Mm. Dia, Borosilicate,Funnel, 75Mm Dia (Polyethelene),Glass Dropping Bottles With Glass Dropper And Rubber Teat ( 125 - 150Ml), Clear,Ice Box Plastic Container With Lid, Insulated (25-30 Ltr Cap),Inoculation Loop, Stainless Steel.,Iodine Flask 500Ml,Measuring Cylinder 250 Ml, Graduated, Class A, Hexagonal Base, Borosilicate,Measuring Cylinder 50 Ml, Graduated, Class A, Borosilicate,Measuring Cylinder 500 Ml, Graduated, Class A, Borosilicate,Measuring Cylinder, 100 Ml (Plastic).,Measuring Cylinder, 100 Ml Graduated, Class A, Borosilicate,Measuring Cylinder, 1000 Ml Graduated, Class A, Borosilicate,Micropipette, 1Ml Capacity, Variable Volume,Micropipette, 5Ml Capacity, Variable Volume,Microscope Glass Slide With Cover Slip (Rectangle 100Pc/Pack),Microtip Holder Box, Size-1Ml Tips,Microtip Holder Box, Size-5 Ml Tips,Microtips, 1Ml Capacity (500 Nos/Pack),Microtips, 5Ml Capacity (100 Nos/Pack),Nesslers Tube Stand For 100Ml,Nesslers Tube Stand For 50Ml,Nesslers Tube, 100Ml,Petri Dish, Glass 55X17mm,Petri Dish, Glass 90X17mm,Pipette 1 Ml, Graduated, Class A,Pipette 2 Ml, Graduated, Class A,Pipette 5 Ml, Graduated, Class A,Pipette Controller, Chargeble,Pipette Stand, Plastic Vertical,Pipette Sucker Bulb(Small), Silicone,Pipette, 10 Ml, Graduated, Class A,Pipette, 10 Ml, Graduated, Class B, White Marked,Pipette, 25 Ml, Graduated, Class A,Plastic Tray, 42X31.2X20 Cm,Polyethyelene/ Polypropylene Stirrer Rod, 6 To 8Mm Dia & 150-200 Mm Length,Polyethylene Cans, 2 Ltr Capacity, Leak-Proof Cap,Polypropylene/Polyethylene Spray Bottle, 500Ml,Ptfe Magnetic Stirrer Bar, 10Mm Dia X 25Mm Length,,Reagent Bottle ( Screw Caped) 1000 Ml Clear, Borosilicate,Reagent Bottle ( Screw Caped) 150 Ml Clear, Borosilicate,Reagent Bottle ( Screw Caped) 250 Ml Clear, Borosilicate,Reagent Bottle ( Screw Caped) 500 Ml Clear, Borosilicate,Reagent Bottle Ambered (Screw Caped) 1000Ml, Borosilicate,Reagent Bottle Ambered (Screw Caped) 150Ml, Borosilicate,Reagent Bottle Ambered (Screw Caped) 250Ml, Borosilicate,Reagent Bottle Ambered (Screw Caped) 500Ml, Borosilicate,Sample Cuvettes, Clear With Black Lid, Hight 55 Mm, Diameter 24 Mm, Set Of 12 For Lovibond Tb 300 Ir Turbidity Meter, Part No. 197655,Separating Funnel With Stand, 1000Ml Borosilicate,Test Tube Stand, 18 Mm Tube Holder, Plastic Type,Test Tube With Rim 18Mmx150mm, (Capacity 25 Ml), Pack Of 50 Nos/Pack,Test Tube With Rim, 25X150mm (Boiling Tube, Capacity 55Ml), Pack Of 50 Nos/Pack,Thermometer -Glass, -10 To +110 Degree Celsius, With Nabl Calibration Certificate,Thermometer -Glass, -10 To 250 Degree Celsius, With Nabl Calibration Certificate,Total Hardness -Ammonium Chloride Ar, 500G,Thermometer -Glass, -10 To 50 Degree Celsius, With Nabl Calibration Certificate,Volumetric Flask 100Ml Borosilicate A Grade With Nabl Certificate,Volumetric Flask 25 Ml, Class A Polyethylene,Volumetric Flask 25Ml Borosilicate A Grade With Nabl Certificate,Volumetric Flask 50Ml Borosilicate A Grade With Nabl Certificate,Volumetric Flask 1000Ml Borosilicate A Grade With Nabl Certificate,Volumetric Flask 250Ml Borosilicate A Grade With Nabl Certificate,Volumetric Flask 500Ml Borosilicate A Grade With Nabl Certificate,Wash Bottle, 1000 Ml, Plastic (Ldpe), Squeeze Type,Wash Bottle, 500 Ml, Plastic (Ldpe), Squeeze Type,Watch Glass, 80Mm Dia, 50 Nos/Pack,Wide Mouth Plastic Reagent Bottles, 1000 Ml,Wide Mouth Plastic Reagent Bottles, 125 Ml,Wide Mouth Plastic Reagent Bottles, 250 Ml,Wide Mouth Plastic Reagent Bottles, 500 Ml,Beaker, 100 Ml Plastic (Polypropylene),Crm Residual Free Chlorine Solution (2 Mg/L), 2 Ml, With Iso 17034-2016 Certificate, 2Ml,Crm Manganese Solution - 1000 Mg/L, With Iso 17034-2016 Certificate,100Ml,Crm Phosphorus Standard Solution, 1000 Mg/L With Iso 17034-2016 Certificate, 100Ml,Crm Silica Solution - 1000Mg/L, With Iso 17034-2016 Certificate, 100Ml,Crm Oil & Grease - 1000Mg/L, With Iso 17034-2016 Certificate, 250Ml,Chromogenic Coliform Agar (Cca Agar) For Detection Of Colioforms & E.Coli (Composition As Per Iso9308-1-2014), Mp1991l-100G,Hichrome, Chromogenic Coliform Agar (Cca) Plate With 0.45 Micro M, 47Mm Dia, Sterile Gridded Membrane Filter For Total Coliform & E.Coli 50 Plates/Pack, Cno-Mf034f-50Pt,Simmons Citrate Agar, 100G,Kovacs Indole Reagent, 100 Ml,Steam Indicator Tape 18Mm, (Auto Clave Tape)(Ref-La984),Forceps, Stainless Steel Blunt End. (Size 6 Inch),Glass Ph Electode (Eutech). C.No- Ecfc7252201b,Nesslers Tube 50Ml Borosilicate,Spactula 6 Inch Ss,Crm Nitrite Standard Solution, 1000 Mg/L With Certificate As Per Iso 17034-2016, 500Ml,Crm Ph 4 Buffer Soultion, With Iso 17034-2016 Certificate, 500Ml,Crm Ph 7 Buffer Solution, With Iso 17034-2016 Certificate, 500Ml,Crm Ph 10 Buffer Solution, With Iso 17034-2016 Certificate, 500Ml,Crm Potassium Dichromate, With Iso 17034-2016 Certificate, 45G,Crm Potassium Hydrogen Phthalate Standard, With Iso 17034-2016 Certificate, 45G,Crm Sodium Carbonate Standard, With Iso 17034-2016 Certificate, 45G,Crm Sodium Chloride - Standard, With Certificate As Per Iso 17034-2016, 100G,Crm Sulphate Standard Solution, 1000 Mg/L With Iso 17034-2016 Certificate, 500Ml,Crm Turbidity Standard Solution - 1000Ntu, With Iso 17034-2016 Certificate, 500Ml,Filter Paper 0.45 Micro M, 47Mm (Hvlpo4700) For Tss, 100 Nos/Pack,Crm Aluminium Standard Solution, 1000Mg/L With Iso 17034-2016 Certificate, 100Ml,Crm Boron Standard Solution, 1000 Mg/L With Iso 17034-2016 Certificate, 100Ml,Crm Calcium Carbonate - With Iso 17034-2016 Certificate, 20G,Crm Colour Standard Solution,500 Pcu With Iso 17034-2016 Certificate, 100Ml,Crm Conductivity Standard (Potassium Chloride) Solution, 1.41Ms/Cm With Iso 17034-2016 Certificate, 500Ml,Crm Flouride Standard Solution, 1000 Mg/L With Iso 17034-2016 Certificate, 500Ml,Crm Nitrate Standard Solution, 1000 Mg/L With Iso 17034-2016 Certificate, 500Ml,Measuring Cylinder 25 Ml Borosil A Class,Test Tube .Cleaning Brush

BRR:8648302 Work Of Supply Of Chemical, Consumables, Glasswares And Bacteriological Items To Cwtl, Ombr And Jwtl Water Testing Laboratories Under Ee Qa Division - Petri Dish, Glass 55X15mm,Barium Chloride Dihydrate. (Ar),Ammonia Buffer Solution For Hardness (Ar),Test Tube Cleaning Brush,,Volumetric Flask 25Ml Borosilicate A Grade With Nabl Certificate,Wide Mouth Plastic Reagent Bottles, 125 Ml,Volumetric Flask 50Ml Borosilicate A Grade With Nabl Certificate,Volumetric Flask 25 Ml, Class A Polyethylene,Volumetric Flask 100Ml Borosilicate A Grade With Nabl Certificate,Test Tube Stand, 18 Mm Tube Holder, Plastic Type,Reagent Bottle Ambered (Screw Caped) 250Ml, Borosilicate,Reagent Bottle ( Screw Caped) 250 Ml Clear, Borosilicate,Reagent Bottle ( Screw Caped) 150 Ml Clear, Borosilicate,Polyethylene Cans, 2 Ltr Capacity, Leak-Proof Cap,Polyethyelene/ Polypropylene Stirrer Rod, 6 To 8Mm Dia & 150-200 Mm Length,Pipette, 10 Ml, Graduated, Class A,Pipette 5 Ml, Graduated, Class A,Pipette 2 Ml, Graduated, Class A,Pipette 1 Ml, Graduated, Class A,Microtips, 5Ml Capacity (100 Nos/Pack),Microtips, 1Ml Capacity (500 Nos/Pack),Microtip Holder Box, Size-5 Ml Tips,Microtip Holder Box, Size-1Ml Tips,Micropipette, 5Ml Capacity, Variable Volume,Micropipette, 1Ml Capacity, Variable Volume,Measuring Cylinder, 100 Ml Graduated, Class A, Borosilicate,Measuring Cylinder 50 Ml, Graduated, Class A, Borosilicate,Evaporating Dish With Spout, 100-110Mm Dia (100 Ml Capacity), Porcelain,Cuvette - Quartz,10Mm Square Shape, For Spectrophotometer,Cuvette - Glass10 Mm, For Spectrophotometer (2 Nos / Pack),Conical Flask, 250 Ml, Class A, Borosilicate.,Chemical Weighing Bottle With I/C Glass Lid 60 Ml, Borosilicate Squat Form,Cadmium Reduction Column With Stand,Burette-Amber 50Ml, Graduated With Gp Stop Cock, Class A,Burette, 50 Ml Graduated With Gp Stop Cock, Class A,Burette Stand.(Metal),Bottle Cleaning Brush,Beaker, 50 Ml, Borosilicate.,Beaker, 100 Ml,Borosilicate.,Steam Indicator Tape 18Mm, (Auto Clave Tape)(Ref-La984),Eosin Methlylene Blue (Emb) Agar, 100G,Beef Extract, Bacteriological Grade, 500G,Oxidase Reagent, 100 Ml (Gordon-Macleod Reagent),Filter Paper, Sterile, 47Mm, Gridded, 0.45U Nitrocelluose /Celluose Ester Filter Disc (100Nos/Pack)(Hawgo47s6),Dettol Liquid Hand Wash Solution, Refill Pack, 750Ml.,Disposable Biodegradable Dustbin Bags, 100 Bags/Unit,Towels Small Size (50Cmx80cm).,Tissue Paper Roll (2 Ply),Tissue Paper Box (2 Ply, 100 Wipes),Surgical Gloves, Nitrile Powder Free (100 Nos/Box).,Surgical Face Mask (100 Nos/Box), Disposable,Phenyl, Cleaning Solution, 5 Ltr,Laboratory Detergent - Cleansol (Phosphate Free), 5 Ltr,Lab Aprons. (Size 40/42),Hand Sanitizer, 500 Ml,First Aid Kit.,Dettol Liquid Hand Wash Solution, With Dispenser, 200Ml.,Dettol Antiseptic Solution, 500Ml,Brown Paper Sheets, 100 To 120 Gsm, Size 90X115cm, (500 Sheets/Ream),Alluminium Foil Roll, 18 Meter,Sterile Cotton Swab (Himedia)100 Nos/Pack,Isopropyl Alcohol, 2.5 Ltr,Kovacs Indole Reagent, 100 Ml,Simmons Citrate Agar, 100G,Crm Sulphate Standard Solution, 1000 Mg/L With Iso 17034-2016 Certificate, 500Ml,Crm Ph 10 Buffer Solution, With Iso 17034-2016 Certificate, 500Ml,Crm Ph 7 Buffer Solution, With Iso 17034-2016 Certificate, 500Ml,Crm Ph 4 Buffer Soultion, With Iso 17034-2016 Certificate, 500Ml,Hichrome, Chromogenic Coliform Agar (Cca) Plate With 0.45 Micro M, 47Mm Dia, Sterile Gridded Membrane Filter For Total Coliform & E.Coli 50 Plates/Pack, Cno-Mf034f-50Pt,Chromogenic Coliform Agar (Cca Agar) For Detection Of Colioforms & E.Coli (Composition As Per Iso9308-1-2014), Mp1991l-100G,Crm Oil & Grease - 1000Mg/L, With Iso 17034-2016 Certificate, 250Ml,Crm Residual Free Chlorine Solution (2 Mg/L), 2 Ml, With Iso 17034-2016 Certificate, 2Ml,Crm Colour Standard Solution,500 Pcu With Iso 17034-2016 Certificate, 100Ml,Crm Calcium Carbonate - With Iso 17034-2016 Certificate, 20G,Filter Paper 0.45 Micro M, 47Mm (Hvlpo4700) For Tss, 100 Nos/Pack,Total Hardness -Ammonium Chloride Ar, 500G,Sodium Hypochlorite Solution, 5 Ltrs,Calcium Hardness - Sodium Sulphate Ar, 500G,Total Alkanity - Sulphuric Acid Ar, 500Ml,Calcium Hardness - Sodium Hydroxide Ar, 500G,Chloride - Sodium Chloride Ar, 500G,Sodium Acetate Crystals, Trihydrate (Ar) , Anhydrous, 500G,Chloride - Silver Nitrate Ar, 25G,Potassium Dihydrogen Ortho-Phosphate (Ar), 500G,Potassium Dichromate (Lr), 500G,Potasium Iodate, 100G,Phenolphthalein Powder (Ar),25G,Ph-7 Buffer Tablets, 10 Tablets/Pack,Ph-4 Buffer Tablets, 10 Tablets/Pack,Ph-10 Buffer Tablets, 10 Tablets/Pack,Ph Paper Strips (0-14 Range),Oxalic Acid, Dihydrate (Ar), 250G,Nitric Acid (Ar), 500 Ml,Neda (N-1-Naphthyl Ethylenediamine Dihydrochloride) (Ar), 5G,Methyl Red Ph Indicator Powder, 25G,Mercuric Sulphate (Ar),500G,Magnesium Chloride, Hexahydrate (Ar), 25G,Liquor Ammonia Solution, 500 Ml,Iodine Resublimed (Ar), 100 G,Chemical/ Reagents-Hydrochloric Acid, Reagent-Ar, 500 Ml,Glycerol, Purified (Lr), 500 Ml,Iron Method (1) 1-10 Phenanthroline Method -Glacial Acetic Acid Ar, 500 Ml,Filter Paper, Whatmann Grade No.1, 125 Mm Dia, Circular, 100 Nos/Pack,Ethanol, Absolute Alchohol, 99.9 Percentage, 2.5 Ltr,Eriochrome Cyanine - R, 25 G,Dpd-Reagent (N,N-Diethyl-P-Phenylenediamine Sulphate) (Ar), 25 G,Curcumine Crystaline Powder (95%), 25 G,Cdta,25 G,Total Hardness - Calcium Carbonate Ar, 500 G,Bromocresol Green Dye (Ar), 25 G,Barium Diphenylamine Sulphonate (Ar), 25 G,Ammonium Persulphate, 250 G,Ammonium Hepta Molybdate (Ar), 500 G,Ammonium Acetate Crystals (Ar), 500 G,Aluminum Potassium Sulfate Dodecahydrate 99%, 500 G,Acetone (Ar), 2.5 Ltr,Iron Method (1) 1-10 Phenanthroline Method -1,10,Phenanthroline Monohydrate Ar,Crm Flouride Standard Solution, 1000 Mg/L- With Iso-17034 2016 Certificate,Sterile Filteration Funnel For Membrane Filtration Manifold (Ez-Stream) 100Ml, 150 Units/Pack,Bromocresol Purple Indicator,25G,Nylon Syringe Filter, Diameter 0.22 Micro Meter, 100 Pices/Box,Filter Paper, Non-Sterile, 47Mm, Gridded, 0.45U Nitrocelluose /Celluose Ester Filter Disc (100Nos/Pack),Ph Electrode Refilling Electrolyte/Solution Ecre001 4M Kcl With Agcl Electrolyte, 60Ml,Haemocytometer 30X70mmx4mm Chamber Depth 0.1Mm,Sodium Fluoride. (Ar), 100G,Crm Manganese Solution - 1000Mg/Lwith Iso-17034 2016 Certificate,100Ml,Crm Iron Standard Solution, 1000 Mg/L- With Iso-17034 2016 Certificate, 100Ml,Crm Turbidity Standard Solution - 1000Ntu- With Iso-17034 2016 Certificate

BRR:8648008 Supply Of Equipment, Consumables, Linen, And Medicine , Supply Of Equipments, Consumables, Linen, And Medicine , Human Anatomy For Stu+B3:B746dents , Human Embryology , Medical Physiology South Asia Edition 3Rd , Essential Medical Physiology , Practical Physiology , Practical Pathology , Concise Medical Physiology , Biochemistry , Applied Statistics In Health Sciences , Textbook Of Parasitology , Textbook Of Pathology , Pathology Quick Review , Common Medical Symptoms , P. J. Mehtas Practical Medicine , Hutchisons Clinical Method-An Integrated Approach To Clinical Practice , Kundus Besides Clinics In Medicine Part-1 , Kundus Besides Clinics In Medicine Part-2 , Medicine For Students , Macleods Clinical Examinations , Manual For Practical Medicine , Medicine: Prep Manual For Under Graduates , Practical Pathology , Concise Medical Physiology , Davidsons Principles And Practice Of Medicine , Tabers Cyclopedic Medical Dictionary , Textbook Of Radiology For Residents And Technicians , Differential Diagnosis , Radiology In Medical Practice , A Guide To Pathology , Clinical Methods In Medicine , Bates Guide To Physical Examination And History Taking , Savills System Of Clinical Medicine , Essential Of Clinical Pathology , Textbook Of Human Parasitology Protozoology And Helminthology , Diagnosis And Treatment Of Common Skin Diseases , Textbook Of Preventive And Social Medicine , A Short Book Of Public Health , Mcq In Community Medicine , Text Book Of Prevention Practice & Community Physiotherapy Vol 1 , Text Book Of Prevention Practice & Community Physiotherapy Vol 2 , Review Of Preventive & Social Medicine , Essentials Of Medical Pharmacology , Pharmacological Basis Of Medical Practice , Textbook Of Pharmacognosy , Essentials Of Medical Pharmacology , Parikh’S Textbook Of Medical Jurisprudence And Toxicology , The Essentials Of Forensic Medicine And Toxicology , Modern Medical Toxicology , Colour Atlas Of Forensic Medicine , Principles And Practice Of Forensic Medicine , The Essentials Of Forensic Medicine And Toxicology , Illustrated Textbook Of Dermatology , Pharmacology And Pharmacotherapeutics, 26Th Edition , Essential Of Medical Pharmacology , Different Diagnostics In Prediatrics , Essential Of Pediatrics , Clinical Methods In Pediatrics , Recent Advances In Pediatrics , Care Of Newborn , The Short Textbook Of Pediatrics , Instructive Case Studies In Pediatrics , Iap Text Book Of Pediatrics , Practical Pediatrics , Neonatal Asphyxia, Resuscitation And Beyond , Pediatric Clinical Methods , Pediatrics Emergencies , A Manual On Clinical Surgery , Manipal Manual Of Surgery , A Concise Text Book Of Surgery , Srbs Surgical Operations: Text And Atlas , Srbs Manual Of Surgery , Roga Nidan & Vikriti Vigyan Vol.1 (Ncism) , Roga Nidan & Vikriti Vigyan Vol.2 (Ncism) , A Textbook Of Swasthavritta , Ayurvedic Pharmacology &Therapeutic Uses Of Medicinal Plants Dravyagunavignyan , Dravyaguna Vigyan Vol.1 (Ncism) , Dravyaguna Vigyan Vol.2 (Ncism) , Rasashastra & Bhaishajya Kalpana (Vol.1) Ncism , Rasashastra & Bhaishajya Kalpana (Vol.2) Ncism , Kaya Chikitsa Vol.1 , Kaya Chikitsa Vol.2 , Illustrated Textbook Of Rachana Sharir (Volume-I) Hindi , Illustrated Textbook Of Rachana Sharir (Volume-Ii) Hindi , Current Trend In Study Sharir English , Rachana Sharir Hindi , Anatomy Of Marma English , Marma Vigyan , Sushrut Samhita Me Sharir Rachana , Ashtang Hridayam , Astanga Hridaya (Sutra) Hindi With S.S. & Hemadri , Charaka Samhita , Sushruta Samhita , Ashtang Hridayam , Charak Samhita Vidyotini Vol -1 , Charak Samhita Vidyotini Vol -2 , Madhavnidana Vol-L , Madhavnidana Vol-Ii , Kasyapa Samhita (English) , Caraka Samhita (Student Edition) Purvardha , Caraka Samhita (Student Edition) Uttaradha-Pt.1 , Caraka Samhita (Student Edition) Uttaradha-Pt.2 , Prakruti Agni Vigyan /Digestion And Metabolism In Ayurveda , Sharir Kriya Vigyan Volume Of 2 , Tridosha Sangraha , Sharir Kriya Vignyan , Concept Of Agni , Sharir Kriya Vijnanan Part 1 , Sharir Kriya Vijnanan Part 2 , Basic Principkle Of Kriya Sharir , Human Physiology In Ayurveda , Tridosha Sangraha , Ksemakutuhalam (Classical Treatise On Health Care) , Roga Nidan & Vikriti Vigyan (Vol.1) (Ncism) , Roga Nidan & Vikriti Vigyan (Vol.2) (Ncism) , Ayurvediya Roga Nidana Vol. - I , Ayurvediya Roga Nidana Vol. - Ii , Roga & Vikriti Vigyan (Vol.1) , Roga & Vikriti Vigyan (Vol.2) , Ayurveda Microbial Infectious Diseases Including - Covid-19 (VyadhikshaMatwa, Early Intervention, Prevention, Scope For Research, Lifestyle, Food & Hygiene) , Clinical Laboratory Manual (Ayurvedic Interpretation Of Various Laboratory Investigations) , Madhava Nidana. Of Sri Mådhavakara With Madhukosa Sansrita Commentary By Mm. Sri Vijayarakshita And Sri Kanthadatta. Edited With Manoramå Hindi Comm , Anemia In Ayurveda - Pandu Roga. , Gadanigraha By Sri Vaidya Sodhhala. With The Vidyotini Hindi Commentary By Sri Indradeva Tripathi Vol-I , Gadanigraha By Sri Vaidya Sodhhala. With The Vidyotini Hindi Commentary By Sri Indradeva Tripathi Vol-Ii , Gadanigraha By Sri Vaidya Sodhhala. With The Vidyotini Hindi Commentary By Sri Indradeva Tripathi Vol-Iii , Clinical Pathology (Sachitra) , Research Methodology & Biostatistics Bams , Research Methodology & Biostatistics Md/Ms , Fundamentals Of Medical Statics Of Ayurvedic Scholors , Diagnostic Methods In Ayurveda , Doctrines Of Diagnostic Pathology , Dosa Karanatva Mimansa , Manas Prakriti (Personality In Ayur) , Nidana Panchaka (Diagnostic Tool) , Parasitology In Ayurveda , Roga & Vikriti Vigyan (Vol.1) English , Roga & Vikriti Vigyan (Vol.2) English , Rogi Pariksha , Rogi Pariksha Vidhi (Schitra) , Rogi Roga Vimarsa , Vegawarodha , Key Points In Pathology (Handbook) , Jeevanu Vigyan , Roga Nidan & Vikriti Vigyan (Vol.1) Ncism , Roga Nidan & Vikriti Vigyan (Vol.2) Ncism , Clinical Neurology In Ayurveda , Rogi-Pariksha Vidhi , Clinical Methods In Ayurveda , Doshakaranatwa Mimamsa , Rogvinischay , Bhartiya Jivanu Vigyan , Digestion And Metabolism In Ayurveda , Aupasargik Rog - 2 Parts , Nadi Pariksha Of Ravan , Ayurvediya Rogo Ka Vargikaran , Rogi Roga Vimarsa , Madhav Nidanam , Textbook Of Swasthavritta Evam Yoga , Dietary Rules And Prohibitions In Different Diseases (Pathya Apthya Vichar) , Healthy Healing For Better Life , Sarvavijaytantram , Yoga & Ayurveda , Yoga & Swasthya , Mcqs On Swasthavrittam , A Text Book On Swasthavritta , Classical Uses Of Medicinal Plants , Some Controversial Drugs In Indian Medicine , Ayurvedic Pharmacology &Therapeutic Uses Of Medicinal Plants Dravyagunavignyan , Glossary Of Vegetable Drugs In Brihattrayi , Introduction To Dravyaguna(English) , Practical Dravyaguna Vigyan (Ncism) , Dravyaguna Siddhanta , Bhavaprakash Nighantu (Hindi) , Gunaratna Mala , Sartha Vagbhat , Ayurvedokta Aushadhniruktamala , Sarangadhara Samhita Eng. With Dipika & Gudhartha , Susruta Samhita English With Dalhana (Vol.1) , A Handbook Of Standardization Of Ayurvedic Formulations , A Practical Approach To Ayurvedic Drug Manufacturing , Asava Arishta Vigyanam , Ayurvdiya Rasashastra(Hindi) , Ayurved Prakash , Ayurvediya Paribhasha (Hindi) , Ayurvediya Rasashashra(Hindi) , Ayurvediya Vastunishta Prashnavalli , Bhaishajya Kalpana Vigyan(Hindi) , Bhaishajyaratnavali(English) , Bhasma Vidyan , Introduction To Ayurvedic Pharmaceutics , Panchavidh Kashaya Kalpana Vigyan , Practical Book Of Bhaishajya Kalpana , Practical Book Of Rasashastra , Practical Handbook Of Rasashastra And Bhaishajya Kalpana , Quality Control &Standardization Of Ayurvedic Medicines , Rasa Hrdya Tantram , Rasamanjari , Rasashastra (Text With English Translation) , Rasashastra Mcq , Rasayogasagar Part I & Ii , Rasendrasara Sangraha , Sahasrayogam (With Dhara Kalpa) , Selected Ayurvedic Formulations , Sarangadhara Samhita (Hindi) , Siddha Bheshaj Manimala , Some Controversial Drugs In Indian Medicine , Ayurved Prakash , Ayurvediya Rasashastra Ka Udbhava Evam Vikas (Hindi) , Rasatntrasar & Siddhaprayog Sangraha Vol1 , Rastantrasar & Siddhaprayog Sangraha Vol2 , Sarangadhara Samhita (Hindi) , A Hand Book Of Ayurvediya Panchakarma , Encyclopaedic Dictionary Of Ayurveda , Panchakarma Chikitsa Vigyan , A Textbook Of Panchakarma , Panchakrama , Mechanism Of Panchakarma And Its Module Of Investigation , A Guide To Ayurvedic Clinical Practice , Panchakarma Parigyan , Ayurvediy Panchakarma Chikitsa Vigyan , Sushrut Samhita , Charak Samhita Marathi , Charak Samhita Hindi , Bhel Samhita , Bhela Samhita (English) , Chakradatta , Bhavprakash Nighantu , Harit Samhita , Madhav Nidan 1 , Madhav Nidan 2 , Sarangadhara Samhita (Hindi) , Vrundamadhav / Siddhayog , Vangasen Samhita (Cikitsasara Sangraha) 1-2 Parts (English) , Panchakarma Therapy , Panchakarma And Ayurvedic Massage , Panchakarma Chikitsa Vighyan 1 , Panchakarma Chikitsa Vighyan 2 , Panchakarma , Panchakarma Therapy , Principles And Practice Of Panchakarma , Panchakarma Therapy , Drugs Useful In Panchakarma , Charaka Samhita , Sushruta Samhita , Ashtang Hridayam , Kayachikitsa , Introduction To Kayachikitsa , Kayachikista Part Il , Atyayik Vyadhi Nidana Chikitsa , Ayurvediya Manas Vidnyana , Sarth Vagbhata , Chakradatta , Sarangadhara Samhita Eng. With Dipika & Gudhartha , Charaka Samhita , Ashtang Hridayam , Charak Samhita Vidyotini Vol -1 , Charak Samhita Vidyotini Vol -2 , Madhavnidana Vol-L , Madhavnidana Vol-2 , Ayurvediya Nidana Chikitsa Siddhanta Vol-L , Ayurvediya Nidana Chikitsa Siddhanta Vol-2 , Ayurvediya Management Of Stroke , Yoga And Yogik Chikitsa , Keraliya Panchakarma Chikitsa , Medical Emergency , Ideal Physician , Management Of Obesity In Ayurveda , Ayurvedic Cosmetology , Research Methodology & Medical Statistics Bams , Research Methodology & Medical Statistics Md/Ms/Pg , Kashyap Samhita , Kasyapa Samhita (English) , Ashtang Hridayam , Ayurved Chikitsa Sutra , Concept Of Manas In Ayurved , Principles & Practices Of Ayurvedic Medicine , Vata Vyadhi Chikitsa Vidnyan , Vyadhi Nigraha By Vishram Yati (E) , Yoga And Ayurved , Encyclopedia Dictionary Of Ayurved , Kaumarbhrityam -1 , Bala Roga (Ayurveda Paediatrics) , Kashyapa Samhita With Narayani Commentry , Kasyapa Samhita (English) , Acharyas Textbook Of Kaumarbhritya Vol 1 , Acharyas Textbook Of Kaumarbhritya Vol 2 , Notes On Kaumarbhritya , Kaumarbhritya , Kaumarbhritya Manjusha , Kashyapa Samhita Ek Parichay , Arogyakalpdrum , Kaumarbhritya , Principles & Practice Of Paediatrics In Ayurveda , Susruta Samhita Sanskrit Text With Hindi Translation Vol-1 , Susruta Samhita Sanskrit Text With Hindi Translationvol-2 , Abhinav Shalya Vigyan 1 , Abhinav Shalya Vigyan 2 , Charak Samhita 1 , Charak Samhita 2 , Ayurvediya Shalya Vigyan 1 , Ayurvediya Shalya Vigyan 2 , Outline Of Shalya Trantra , Susruta Samhita English With Dalhana (Vol.1) , Susruta Samhita English With Dalhana (Vol.2) , Susruta Samhita English With Dalhana (Vol.3) , Encyclopaedic Dictionary Of Ayurveda , Illustrations On Ayurvedic Surgery And Pharmaceutics , Shalyatantra , Shalakya 1 &2(English Translation) , Text Book Of Shalakyatantra , Shalakyatantra Vigyan , Shalakyatantra -Kriyakalpa , Shalakyatantra 1&2 , Encyclopaedic Dictionary Of Ayurveda , Model Papers For Ayurvedic Competitive Examination , Research Methodology & Biostatistics Bams , Research Methodology & Biostatistics Md/Ms , Shalakya Tantra Vol 1 , Shalakya Tantra Vol 2 , Shalakya Tantra (Netra, Ent, Head) , Shalakya Tantra (Netra Rog) , Garbhasanskar , Indian Medicinal Plants In Stri And Prasuti Roga , Streeroga Vigyan , Prasuti Tantra Vigyan , Abhinav Prasuti Vigyan , Stri Roga (Gynaecology) English , Prasuti Tantra (Obstetrics) English , Charak Samhita , Charak Samhita , Asthanga Hrudaya , Saartha Vagbhat , Kashyapa Samhita , Kasyapa Samhita (English) , Agada Tantra Practical - Ncism , Prashna Kosha (Question Bank) , Vriksayurveda Samhita (Trilingual) , History Of Ayurveda (Eng) Ncism , Ntet (National Teacher Eligibility Text) - Ncism , Padarth Jijnasa - Eng (According To New Ncism Course Structure) , Padarth Mimansa (Hindi) Ncism , Prtyaksh Shariram Marathi/ Kriya Sharir , ????? ???? ??????? (??? 1 ) ????? , ????? ???? ??????? (??? 2) ????? , Textbook Of Rachana Sharir (Part 1 & 2) Marathi , ????? ???? ???????????? , Sharir Kriya Part 1 , Sharir Kriya Part 2 , Pratyakshik Kriya Sharir /Sharir Kriya Vidnyan Pratyakshik , Kriya Sharir Mcq/Complete Mcqs Book For First Bams Students , Dosha Dhatu Mala Vigyan , Rogavastha , Roganidan Evam Vikriti Vigyan Part-1 , Roganidan Evam Vikriti Vigyan Part-2 , Kayachikitsa , Roga Vidnyana Vikriti Vidnyan , Sarth Vaghbhatta , Nidanatmak Rugnapariksha Va Lab Test , Dravyagua Vigyana- Part 1 & 2 (Marathi) , Dravyaguna Vidnyan , Maharashtratil Divya Vanoushadhi , Vanaushadhi Gunadarsh By Charak , Bhaishajya Kalpana Pratyakshik(Marathi) , Bharatiya Rasashastra( Marathi) , Rasashastra- Marathi , Panchabhautik Chikitsa 1 , Panchabhautik Chikitsa 2 , Ayurveda Panchakarma , Panchakarma Purak Nidan , Panchakarma Vyapad Ani Vyavashtha , A Textbook Of Panchakarma , Essentials Of Practical Panchakarma Therapy , Panchakarma , Yashashvi Chikitsa , Basti ( A Half Panchakrama) , Vaman Karma , Basti Siddhi , Kayachikitsa Part 1 , Kayachikitsa Part 2 , Ayurvediya Panchakarma Vidnyana , Prasutitantra Evum Streeroga Shlokavali , Prashna Kosha (Question Bank) , Sanskrit Vyakaran Nikar , Shukla Yajurveda Samhita (Subodhini Hindi Tika) , Sthanika Chikitsa In Prasuti & Striroga , Aarogyadayini Sopan - Yoga , Agada Tantra Visha Chikitsa , Agni & Pitta Vigyan , Astanga Hridaya (Vol.1) English , Astanga Hridaya (Vol.2) English , Astanga Hridaya (Vol.3) English , Basic Concepts Of Dravyaguna Vigyan , Bhela Samhita (English) , Bhela Samhita (Text) , Bhisakkarmasiddhi , Caraka Tatva Pradeepika , Classical Instruments Of Rasashastra & Bhaisajya Kalpana , Compilation On Yoga & Naturopathy , Concepts Of Health & Disease In Ayur , Concise Prasuti-Tantra (Obstetrics) , Concise Striroga (Gynaecology) , Dhanwantari Nighantu (English) , Diagnostic Methods In Ayurveda , Doctrines Of Diagnostic Pathology , Dravyaguna Vigyan (Tb) Vol.1 English Ncism , Dravyaguna Vigyan (Tb) Vol.2 English Ncism , Harita Samhita , Nighantu Aadarsh (Vol.1) , Nighantu Aadarsh (Vol.2) , Vangasen Samhita (Cikitsasara Sangraha) 1-2 Parts (English) , Vrindamadhav Or Siddhayoga (2 Part) E , Vrindamadhav Or Siddhayoga (Hindi) , Yogaratnakara (2 Parts) English , Ayurvedic Formulary Of India Part -1 To 4 , Application On Standardised Namburi Phased Spot Test In Identification Of Bhasma And Sindura Preparations Of Ayurveda , A Handbook Of Cosmetics , Inorganic Pharmacetical Chemistry , Organic Pharmacetical Chemistry , Practical Pathology With Viva Voce Questions , Human Embryology By Saddler , Light On Pranayama , Food Science , Apollo Clinical Nutrition- Handbook , Aaharane Rog Hara , Medicine - Exam Preparatory Mnual For Undergraduates , The Chest X Ray - A Survival Guide , Must Know Medicine , Current Medical Diagnosis & Treatment 2025 , Oxford Handbook Of Clinical Medicine , The Abc Of Cbc , A Text Book Of Panchakarma , Practical Practice In Panchakarma , Ayurveda & Panchakarma , Word Procedere , Long Case In General Surgery , Short Case In Surgery , Schwortz Principal Of Surgery (11Th Edition) , Sabiston Text Book Of Surgery (21Th Edition) , Fishermastery Of Surgery , Viddhakarma Chikitsa , Manava Sharir (Revised Edition) , Tortora’S Principles Of Anatomy & Physiology(Global Edition) , Tex Book Of General Anatomy With Case Scenarios And Clinical Applications 2Nd Edition 2023 , Clinical Anatomy , Ayurvedarth Anatomy , Sarth Agadtantra , Surgery (Shalya Vidnyan) , Vaidyakiya Shabdakosh , Human Embroyology , A Handbook Of Cosmetics , The Evolving Brain English , Principle Of Anatomy And Physiology , Essentials Of Ecg , Textbook Of Medical Laboratorytechnology Vol-1 , Textbook Of Medical Laboratorytechnology Vol-2 , Textbook Of Microbiology , Pathology Illustrated , Essentials Of Ecg , Harrisons Manual Of Medicine , The Ecg Made Esay , Leoschamroth: An Introduction To Electrocardiography , Physics And Technical Aspects Diagnotic Ultrasound , A Textbook Of Pathology , Chamberlains Symptoms And Signs In Clinical Medicines , Frenchs Index Of Differential Diagnosis An A-Z 1 , Practical Biochemistry For Medical, Dental And Allied Courses , Practical Pathology , Text Book On Clinical Biochemistry And Hematology , Medical Laboratory Technology , Learning Radiology: Recognizing The Basics , Textbook Of Community Medicine , Parks Textbook Of Preventive And Social Medicine , Advanced Textbook On Food And Nutrition , Self Assessment & Review Of Preventive & Social Medicine , Pharmacology And Pharmacotherapeutics , Practical Pharmacognosy , Pharmacognosy , Botany Of Commonly Used Medicinal Plants With Diagnostic Keys , Basic Bioinformatics , Cultivation Of Medicinal And Aromatic Crops , Vrikshayurveda- Ancient Science Of Plant Life And Plant Care , Evidence-Based Validation Of Herbal Medicine - Translational Research On Botanicals , Ashtang Nigantu , Indian Medicinal Plants (All Volumes) , Uncommon Plant Drugs Of Ayurveda , Botany For Degeree Student , Quality Standards Of Indian Medicinal Plants , Atlas Of Microscopy Of Medicinal Plants , Textbook Of Pharmacognocy , Pharmacology And Therapeutics , Indian Material Medica , Materia Medica Part 2 , A Handbook Of Cosmetics , Drugs And Cosmetic Act - 1940 , Inorganic Pharmaceutical Chemistry , Organic Pharmaceutical Chemistry , Pharmaceutics I & Ii , , Toxicology At A Glance , Textbook Of Forensic Medicine And Toxicology , Modi Textbook Of Medical Jurisprudence And Toxicology , Singhal’S Forensic Medicine And Jurisprudence , Nandy’S Handbook Of Forensic Medicine And Toxicology , Forensic Medicine And Toxicology ( Theory, Oral And Practical) , Practical Handbook Of Agadtantra , Forensic Pharmacy , Medical Laws And Ethics , Textbbok Of Forensic Meicine And Toxicology , Taylors Principles And Practical Of Medical Jurisprudence , Doctor And Law , Guidelines Of Poisons , Envrionmental Toxicology , Contact Dermatitis , Herbs For Deramatitis Bites , A Short Textbook Of Medical Entomology , Hand Book Of Drug Laws , Medical Negligence And Legal Remedies , Drugs And Cosmetic Act 1940 , Physical Diagnosis 17Th Edition , The Washington Manual Of Medical Therapeutics, 37Th Edition , Practical Medicine, 22Nd Edition , Harrisons Principal Of Internal Medicine Vol 1 21St Edition , Harrisons Principal Of Internal Medicine Vol 2 , 21St Edition , Api Textbook Of Medicine Vol.1, 12Th Edition , Api Textbook Of Medicine Vol.2, 12Th Edition , Golwalla Medicine For Students, 26Th Edition , De Gruchys Clinical Haematology In Medical Practice , Roberts & Hedges Clinical Procedures, 7Th Edition , Pocket Guide To Critical Care Pharmacotherapy , Handbook Of Icu Therapy, 3Rd Edition , Practical Guidelines To Fluid Therapy, 2Nd Edition , Irwin & Rippes Intensive Care Medicine, 9Th Edition, Vol-1 , Irwin & Rippes Intensive Care Medicine, 9Th Edition, Vol-2 , Lippincott Illustrated Reviewspharmacology South Asian Edition , Essentials Of Medical Microbiology , Handbook Of Fluid, Electrolyte And Acid Base Imbalances, 3Rd Edition , Antibiotic Basics For Clinicians, 2Nd Edition, South Asian Edition , Dejongs Neurological Examination , South Asian Editio, 2019 , Neurological Examination Made Easy, Sixth Edition , Nutrition & Child Development , Nelson- Textbook Of Pediatrics Volume-1 , Nelson- Textbook Of Pediatrics Volume-2 , Nelson- Textbook Of Pediatrics Volume-3 , Pediatric Secrets , Pediatric Clinical Examination , Handbook Of Drug Therapy In Pediatrics , Drug & Dosage In Children , Practical Pediatrics , Pediatric Prescriber , Cloharty And Stark Manual Of Neonatal Care , Bailey & Loves : Short Practice Of Surgery , Bedside Clinics In Surgery , A Practical Guide To Surgical Instruments: X-Rays And Operative Interventions , Sabiston Textbook Of Surgery International Edition , Greys Anatomy , Introduction To Surgical Instruments And Procedurres For Undergraduate , Emergency Surgery , Srbs Bed Side Clinics In Surgery , Practical Ent , Emergencies In Ear,Nose,Throat: Management Pearls , Manual Of Eye Examination & Diagnosis An Elaborated Ophthalmology , Essentials In Opthalmology , Color Atlas Of Ent Diagnosis , Williams Gynecology , Williams Obstetrics , Operative Obstetrics , Te Lindes Operative Gynacology , Comprehensive Text Book Midwifery & Gynaecological Nursing , Obstetrics And Gynaecology , Shaw Text Book Of Operative Gynaecology , Clinical Cases In Obstetrics And Gynaecology , Essential Of Gynaecology , Quality Standards Of Indian Medicinal Plants , Dravyaguna Vidnyana -1 , Dravyaguna Vidnyana -2 , Ayurvediya Rasashashra , Vikriti Vigyan , Ayurvediya Vikriti Vigyana , Quality Control &Standardization Of Ayurvedic Medicines , A Textbook Of Rasashashra (English) , Swasthavritta Vigyan , Rasashastra-Notes With Mcq With New Pattern , Rasashastra , Ayurvdiya Rasashastra , Bhaishajya Kalpana Vigyan , Padarth Mimansa (Hindi) , Raspanchaka , Pathogenesis In Ayurveda , Rajnighantu , Foundations Of Contemporary Yoga , The Foundation Of Contemporary Yoga , Patanjala Yoga Darshan , Nadi Pariksha By Ravan , Ayurvediya Aushadhi Gunadharma Shastra , Ayurveda For Health &Family Welfare , Nadi Vigyan By Kanad , Ayurvedic Remedies For Comman Diseases , Datatreya Yogashastra , Arka Prakash , Adyatan Rasa Shastra , Yoga &Swasthya , Yoga &Swasthya , Rasendrachintamani , Rogi Roga Pariksha Paddhati , Amnaska Yoga , Ayurvediya Rogi-Rog Pariksha Paddhati , Rasamanjari , Priya Nighantu , Sanskrit For Bams , Dincharya &Sukhi Jivan , Rasa Prakasha Sudhakar , Poshahar &Uski Upyogita-Aahar Vigyan , Hathayoga Pradipika , Ayurvediya Rogo Ka Vargikaran , Roga Vinischya (Roga-Vikriti) , Swasthavrittam , Swasthavritta Vidnyana , Swasthavritta Vigyan (Pocket) , Swasthavrittam , Yogic Shatkarma , Kaiydev Nighantu , Padarth Jijnasa - Eng (According To New Ncism Course Structure) , Ayurveda Me Arogya &Kutumb Kalyan , Yogic Nadis , Rasa Adhyaya , Rasa Hrdya Tantram , Ayurved Prakash , Clinical Yoga And Ayurved , Dosa Dhatumala Vigyan , Nidanpanchak , Practical Book Of Bhaishajya Kalpana , Rasamritam , Yoga &Ayurveda , Pakadarpana Of Nala– Text With English Translation With Critical Notes , Vaidya Ratna By Shivanand (English) , Pharmacovigilance In Ayurveda , Nadi Prakash By Shankar Sen , Nadi Pariksha Vigyan (Ayurvediya) , Ayurvedic Nadi Pariksha Vijnana , Roga &Vikriti Vigyan (Slokavali) , Ayuryoga (Life In Equilibrium) , Ayurveda (Complete Handbook) , Ayurvedic Cosmetology , Roga Nidana &Vikriti Vigyan (Vol.1) , Roga Nidana &Vikriti Vigyan (V.2) E , Roga Vigyan &Vikriti Vigyan Vol.1 , Roga Vigyan &Vikriti Vigyan Vol-2 , Swasthavritta Vigyan , Swasthavritta Vigyan , Text Book Of Swasthavrittam , Swasthavritta Vigyan , A Text Book Of Rasashastra , A Text Book Of Rasa Shastra(Iatro-Chemistry And Ayurvedic Pharmaceutics) , Ashtanga Hridayam , Illustrated Ashtanga Hridaya Text With English Translation , Samhita Adhyayan -I , Ayurved Ke Mulbhut Siddhant Vol I , Ayurved Ke Mulbhut Siddhant Vol Ii , Amarkosha , Padarth Vijyan Evam Ayurved Ka Itihaas , Dravyaguna Vigyan (Vol.1) Revised Ncism Hindi , Dravyaguna Vigyan (Vol.2) Revised Ncism Hindi , Dravyaguna Vigyan (Vol.3) Revised Ncism Hindi , Dravyaguna Vigyan (Vol.1) English Ncism English , Dravyaguna Vigyan (Vol.2) English Ncism English , Rasashastra & Bhaisajya Kalpana (Vol.1)- Ncism Hindi , Rasashastra & Bhaisajya Kalpana (Vol.2)- Ncism Hindi , Agada Tantra, Vyavaharayurveda & Vidhi Vaidyak Ncism Hindi , Fundamental Principles Of Vikriti Vigyan (Vol.1) Ncism English , Rasa Tarangini By Sadananda Hindi , Pharmacology For Medical Graduates, 4E English , Lippincott Illustreted Reviews Pharmacology 8 Th Ed. , Pocket Medicine 8 Th Ed , Lippincott Illustreted Reviews Physiology 3Rd Ed. , Lippincott Illustreted Reviews Microbiologyiology 5 Th Ed. , Gaharts Intravenous Medication 40Th Edition , The Icu Book. 5Th Ed. , Tintinallis Emergency Medicine 8 Th Ed , Monitoring Mechanical Ventilation Using Ventilator Waveforms , Mechanical Ventilation 2Nd Ed. , Handbook Of Ospe For 1 St Bams , Practical Manual Of Rachana Sharir , Handbook Of Osce/Ospe Of Paraclinical Subjects For Second Bams , Sanskrit & Ayurveda Ka Ithas - , A T.Book Of Padartha Vijnanam- , Sharira Kriya Vijnana-(Human Physiology)- , Tb Of Ayur Physiology-(Kriya-Sharir)-(2)- , Tb Of Ayur Physiology-(Kriya-Sharir)-(I)- , Rachana Sharir Vijnana-(I)-(Ncism)- , Rachana Sharir Vijnana-(Ii)-(Ncism)- , Samhita Adhyayan-(Vol-1)- , Padartha Vijnana- , A T.B. Of Sharira Kriya-(Modern Physiology)- , Kriya Sarira For Bams-(Physiology)- , Kriya Sharira-(Mcq,Saq,Laq)- , T.B.Of Ayur. Physiology-(Kriya Sharira) - Vol:-1 , T.B.Of Ayur. Physiology-(Kriya Sharira) - Vol:-2 , A Tb Of Rachana Shareera-(Tanusamvitti)- , Practical Manual Of Rachana Sharir-(Anatomy) For Bams- , Rachana Shareera For Bams-Rachana Shareera For Bams , Sharir Rachana-(Vol-1)- , Sharir Rachana-(Vol-2)- , Text Book Of Rachana Sharira-(Vol-1)- , Text Book Of Rachana Sharira-(Vol-2)- , Samhita Adhyayan-A-(Astanga Hridyam- , Samhita Adhyayan-B-(Charaka Samhita)- , T.B Of Roganidan & Vikriti Vigyan-(Hindi) 1 & 2 , Swasthavritta Evam Yoga-(Ncism Syllabus)- (Hindi) , Susruta Samhita Vol:-1 (Hindi) , Susruta Samhita Vol:-2 (Hindi) , Susruta Samhita Vol:-3 (Hindi) , Dravyaguna Vol:-1 , (English) , Dravyaguna Vol:-2 (English) , Dravyaguna Vol:-3 (English) , Rasa Shastra - (English) , Ayu.Aushadhi Prayoga Vijnana-(Rsbk) (English) , A Text Book Of Roga Vikruti Vol:-1- (English) , A Text Book Of Roga Vikruti Vol:-2-(English) , Swasthavritta Evam Yoga-(Ncism Syllabus)- (Hindi) , Rasashastra (Mcq) , Adverse Drug Reaction , Rasendra Sar Sangrah , Vaidyaka Paribhasa Pradipa , Textbook Of Rasashastra , Ocean Of Ayu. Pharmaceutics , Diagnostic Methods In Ayurveda , Rasashastra , A. Handbook Of Standarzation Of Ayurvedic Formulations , Rasayan Tantra , Practical Handbook Of Rasashastra & Bhaishajya Kalpana , Sahasrayogam , Selected Ayurved Formulation , Indian Alchemy Of Rasayana , Rasendra Mangalam Of Nagarjuna , Essence Of Ayurvedic Rasashastra , Ayurwed Sanskrit Sudha , Sope Sanskrit Bhag 1 &2 Marathi , Simplified Sanskrit Book Part 1 & 2 English , Textbook Of Rachana Sharir Part 1 & 2 , A Textbook Of Rachana Sharir Part 1 , A Textbook Of Rachana Sharir Part 2 , Charak Samhita Part 1 And 2 , A Textbook Of Rasashastra , Svasthavritta , Aasan Sanskrit Bhag 1&2 Hindi , Human Physiology Volume 1,Volume 2 , Medical Laboratory Technology-Vol-1 And Vol-2 , Robbins And Cotran Pathologic Basis Of Disease , Vol 1,Vol 2 , Kaya Chikitsa (Vol.1-Vol.4) , Sushruta Samhita ( Hindi) Volume 1 & 2 , Sushruta Samhita ( English) Volume 1, 2, 3 , Sushruta Samhita ( English) Volume 1, 2, 3 , Ayurveda Kriya Sharir English Volume 1, Volume 2 , Kriya Sharir Vigyan With Modern Physiology (Ncism) Volume 1,Volume 2 , Sushrutasamhita Sutrasthan Text And Dalhana’S Commentary Along With There Hindi Translation Volume 1, Volume 2, Volume 3 , Susruta Samhita English With Dalhana (Vol.1)(Vol.2)(Vol.3) , Caraka Samhita Savimarsa (Vol.1) , Madhava Nidana Shlokavali Volume 1,Volume 2 , Madhava Nidana. (With Critical Modern Correlation) Vol. - I , Vol. - Ii , Dravyaguna Vigyana (Vol.1) , Sushrut Samhita Hindi Volume 1, Volume 2, Volume 3 , Charak Samhita Vidyotini Volume 1, Volume 2 , Ayurvediya Panchakarma Chikitsa Vol-1, Vol-2 , Madhavnidana Vol 1, Vol 2 , Caraka Samhita Savimarsa Vol.1, Vol.2 , Shalakya Vigyan Vol 1 & Vol 2( English Translation) , Nidana Chikitsa Hastamalaka Vol. I To Iv (Set Of 4) , Ayurvediya Aushadhikaran Vol 1 And 2 , A Textbook Of Kayachikitsa Vol 1 , Vol 2, Vol 3 , Dravyaguna Vigyan (Hindi) Vol.1, Vol.2 - (Ncism) , The Ayurvedic Pharmacopoeia Of India, Part I Vol. I -Vol 9 , The Ayurvedic Pharmacopoeia Of India, Part Ii Vol.1-Vol 3 , Aiims Protocols In Neonatology Vol. 1,Vol 2 , Dr.L.Mahadevans Guide To Ayurvedic Clinical Practice Volume-1, 2, 3 , Aahar Rahasya Bhag 1-5 , Boyds Textbook Of Pathology Vol 1 & Vol 2 , Goldman - Cecil Textbook Of Medicine- Vol-1, Vol-2 27Th Edition , Rosens Emergency Medicine, Concepts And Clinical Practice, 10Th Edition, Vol.1 , Vol 2 , Icu Protocols, 2Nd Edition, Vol-1, Vol.2 , Scott-Browns Otorhinolaryngology Head & Neck Surgery Eight Edition (1 Volume) , Contemporary Understanding & Updates Of Vyadhi Vigyan (Vol.1) Ncism English , Applied Theraputics The Clinical Use Of Drugs 12Th Ed.(Vol 1) , Rasa Jala Nidhi Part 1-5 , All In One Computer , Printer (Multi Function) , Printer (Single Function) , Printer , Digital Library Management Software , Models/ Specimen , High Resolution Close Circuit Camera , Embalming Machine Cadaverous Injector , Cold Storage Cabinet , Trinocular Microscope , Storage Tank For Cadaver , Acrylic Jar With Lid For Formalin , Acrylic Jar With Lid For Formalin , Acrylic Jar With Lid For Formalin , Torsso – Half Body Male And Female , Smart Tv , Digital Spirometery , Nadi Recording Equipments , Height Measurement Scale , Height Measurement Scale , Digital Ph Meter , Digital Weighing , Electrocardiograph , Measuring Tape , Headset With Microphones , Ent Examination Set , Tuning Forks Set , Nasal Speculum Set , Laryngoscope , Histopathological Slides , Dissecting Microscope , Magnification Lens With Light , Dissection Box , Digital Weighing Scale (Upto 10 Gms With Accuracy 0.001Mg) , Digital Weighing Scale (10-100 Grams With Accuracy 0.001 Gram) , Thin Layer Chromatography Kit With Thin Layer Chromatography Applicator, Thin Layer Chromatography Platform , Atomizer, Glass Plates Thin Layer Chromatography Chamber And Thin Layer Chromatography Scale , Hot Air Oven , Muffle Furnace , Ostwald Viscometer , Pycnometer Or Specific Gravity Bottle , Soxhlet’S Extraction Apparatus , Heating Mantle (250Ml) , Heating Mantle (500Ml) , Heating Mantle (1000Ml) , Bunsen Burner Electric Or Gas Burner , Enamel Trays , Water Bath (Rectangular) , Ultraviolet-Cabinet , Desiccator(10 Cm) , Dropper , Needle(Pack Of 3) , Sharp Razor Blades(50 In 1Pack) , Pipe Clay Triangles (Set Of 3) , Wire Mesh(15X15 Cm) , Test Tube Holders (Set Of 6Piece ) , Reagent Bottles (250Ml) , Test Tube Stands , Tripod Stand (Set Of 3) , Pair Of Tong , Test Tubes , Thin Layer Chromatography Plates 20X20cm (Pre Coated) , Evaporating Dish , Silica Crucible , Beakers Two Hundred Millilitre , Glass Rods , Conical Flasks Two Hundred Fifty Millilitre , Glass Funnels , Safranin (Reagents) , Light Green , Sudan Red- Ill , Glycerine , Dragendorff’S Reagent , Millon’S Reagent , Wagner’S Reagent , Benedict’S Solution , Fehling’S Solution , Iodine Solution , Methanol , Distilled Water , Ethanol , Hydrochloric Acid , Sulphuric Acid , Chloroform , Phloroglucinol , Acetic Acid , Ferric Chloride , Potassium Iodide , Magnesium Turnings , Ethyl Acetate , Toluene , Silica Gel Gf-254 , Blottingorfilter Papers , Microscope Slides , Coverslip , Formalin , Distillation Apparatus And Arka Yantra , Kupipakva Bhatti , Bottle Sealing Machine , Sealing Machine , Ball Mill (Stainless Steel Balls) , Tincture Press , Electronic Balance Of Different Capacities (Up To 100 Grms With Accuracy 1.0 Milligram, 100 -1000 Grams With Accuracy 1.0 Gram, 1 Kilogram And Above) , Tablet Coating Pan Unit With Hot Air Blower Laboratory Size , Tablet Polishing Pan Laboratory Size , Homogenizer , Pills Making Machine , End Runner Machine , Edge Runner Machine , Capsule Filling Machine , Double Cone Blender , Liquid Filling Machine , Planetary Mixer For Ointment Or Cream , Soft Gelatine Capsule Filling , Sieve Shaker , Dryer , Granulator , Tablet Making Machine , Tablet Hardness Tester , Vernier Caliper , Pestle And Mortar Glass , Gas Stoves , Gas Stoves , Gas Stoves , Mohs Hardness Test Kit , Frying Pan , Steel Vessel , Steel Vessel , Steel Vessel , Steel Vessel , Spatula , Taveta , Plates Set , Plates Set , Plates (Holes) , Plates (Holes) , Plates (Holes) , Samdamsa Yantra (Tongs) , Samdamsa Yantra (Tongs) , Samdamsa Yantra (Tongs) , Kitchen Aprons , Steel Trays , Steel Trays , Oven Gloves , Kadahi – Iron , Kadahi – Iron , Kadahi – Iron , Aluminium Vessels , Gas Lighter , Stainless Steel Filter , Stainless Steel Filter , Napkin , Manjarpat Cloth , Automatic Flask Shaker , Water Bath , Vertical Furnace - Kupi Pack Type (Two Bottles) X Digital X Maximum Temp 900? , Desiccator Glass , Desiccator With Vacuum , Vacuum Pump , Collapsible Tube – Filling And Sealing Equipment , Brass Vessel , Brass Vessel , Copper Vessel , Copper Vessel , Steel Vessels , Porcelain Crucible , Porcelain Crucible , Hand Grinding Mill , Pyrometer , Clay Graphite Silver Melting Crucible Maximum Temp 1500? , Crucible Tongs 18 Inches Stainless Steel , Crucible Tongs 29 Inches Stainless Steel , Ointment Spatula , Lipstick Moulds , Test Tube , Beaker , Test Tube Holders , Petri-Dish , Stirrer , Red Litmus Paper , Iodine Solution ( Aqueous) , Absolute Alcohol , Hydrochloric Acid , Sulphuric Acid , Precision Melting Point Apparatus , Distillation Unit For Distilled Water , Moisture Analyser Balance , Orbital Shaker , Laminar Airflow , Mechanical Stirrer With Hot Plate , Magnetic Stirrer , Dissolution Test Apparatus , Tablet Disintegration Test Apparatus , Pfizer Type Hardness Tester , Tablet Counter – Small Size , Bulk Density Apparatus , Friability Test Apparatus , Abbes Refractometer , Analytical Balance Digital High Precision (0.0001G – 220G) , Incubator , Clarity Test Apparatus , Humidity Control Oven , Karl Fischer Apparatus , Graduating Sieve Set , Thermometer Up To 110? , Filtration Equipment Kit , Water Bath Twelve Holes , Suction Pump , Sonicator , Total Leucocyte Count Chamber And Sprayer , Clevenger’S Apparatus , Arsenic Limit Test Apparatus , Adjustable Volume Micro Pipette , Rotary Evaporator Apparatus , Soxhlet Apparatus , Soxhlet Apparatus , Reflux Flask With Condenser Single Neck , Reflux Flask With Condenser Single Neck , Petri Dish Glass , Petri Dish Polypropylene , Watch Glass , Watch Glass , Glass Ware - Round Bottom Flask , Glass Ware - Round Bottom Flask , Glass Ware - Round Bottom Flask , Glass Ware - Conical Flask , Glass Ware - Conical Flask , Glass Ware - Conical Flask , Glass Ware - Reagent Glass Bottle , Glass Ware - Reagent Glass Bottle , Glass Ware - Pyknometer , Glass Ware - Test Tube , Glass Ware - Glass Stirring Rod , Glass Ware - Glass Pipette Graduated , Glass Ware - Glass Pipette Graduated , Glass Beaker- Different Capacity , Glass Beaker- Different Capacity , Measuring Flask Different Capacity Set , Measuring Flask Different Capacity Set , Volumetric Flask Different Capacity , Volumetric Flask Different Capacity Set , Graduated Measuring Cylinder Set , Buchner Funnels Small, Medium, , Burette , Burette , Nessler’S Cylinders , Flame Photometer , Ultra Violet Visible Spectro Photometer , Test Tube Stand , Tripod , Filter Paper , Burette Stand , Dropper , Name Plates For Plants , Plastic Container-250 Gm- Capacity , Acrylic Jar (With Lid And Airtight) (20X20x15 Cm) Formalin Jar , Watering Can- 5 Litre Large Plant Watering Can , Sprinkler-Garden Water Pipe Sprayer 6 Nozzle Sprinkler , Cutter , Gardning- Scissor , Organic Fertilizers(10 Lit.) 5Kg Cow Dung Based , Cart-Movers Single Tyre Wheelbarrow With Pipe Frame , Kurhad, Kudal- Utkarsh Heavy Duty Garden Kit | 1.Garden Pickaxe, 2.Hand Hoes With Prongs-2 Nos., 3 Inch 3.Khurpi, 4.Spade (Kudal) , Iron Axe , Iron Pickaxe , Iron Khurpi , Pipe-100 Foot - Half Inch , Pipe-100 Foot -One Inch Pipe , Irrigation System-The Garden Sprinker- Plastic , Irrigation System-The Garden Sprinker- Metal , Plastic Drum , Garden Pots- Small - Cement , Garden Cement Pots-Medium , , Garden Cement Pots-Large , , Garden Cement Pots-Rectangular , , Vertical Garden , Butyrometer , Dissecting Forcep , Spatula , Oven Gloves , Clamp , Micropippett E( Microcapillaries)- Extra Thin- For Tlc , Paraffin Wax , Kjheldahl System (Digestion Unit Plus Distillation Unit) , Digital Muffle Furnaces , Flame Photometer , Refrigerator , Water Bath , Magnetic Stirrer , Hot Plate-Manual , Hot Plate-Digital , Digital Ph Meter (Per Hydrogen Ion Concentration) , Vacuum Filter System , Fume Hood , Vortex Mixer , Viscometer , Refrigerated Centrifuge , Digital Polarimeter , Burette , Glasspipette(1Ml,2Ml,5Ml,10Ml,) , Micropipette , Grinder , Mixer Grinder , Dhoom Yantra , Nasayantra , Tongue Cleaner , Rubber Tube For Vaman Dhoutineti Potenema Pot , Stainless Steel Glass , Stainless Steel Tope , Strainer , Measuring Jug , Plastic Tray 2Set , Chapati Turner With Soup Ladle/Pali , Matte Finish Pakkad , Knead Dough Basket/Basin Bowl , Table Spoon Set Of Six , Vastra Dhoti , Plastic Bucket& Measuring Scale , Milk Lactometer , Hydrometre , Carpet/Satranji/Galicha Rug Dari , Yoga Mat , White Board , White Board , Dry Drug For Practical (Dravyang Department) Various Dry Drug Specimen For Practical Demonstration , Emblica Officinalis , Lepidium Sativum , Carum Roxburghianum , Curcuma Amada , Garcinia Indica , Decalepis Hamiltoni , Terminalia Arjuna , Withania Somnifera , Cassia Fistula , Anethum Graveolens , Psoralia Corylifolia , Terminalia Bellirica , Aegle Marmelos , Cinnamomum Cassia , Woodfordia Fructicosa , Gardenia Gummifera , Ricinus Communis , Tribulus Terrestris , Tinospora Cordifolia , Terminalia Chebula , Glycyrrhiza Glabra , Semecarpus Anacardiu , Mucuna Pruriens , Holarrhena Antidysentric , Randia Spinosa , Rubia Cordifolia , Quercus Infectoria , Piper Nigrum , Cyperus Rotundus , Trachyspermum Ammi , Piper Longum , Boerhavia Diffusa , Sapindus Trifoliatus , Ocimum Basilicum , Commiphora Mukul , Asparagus Racemosus , Cassia Angustifolia , Zingiber Officinale , Cinnamomum Tamala , Vitiveria Zizinoides , Eblica Ribes , Acorus Calamus , Pueraria Tuberosa , Nardostechys Jatamansi , Plumbago Zeylanica , Curcuma Longa , Azadiracta Indica , Holarrhena Antidysentric , Curcuma Zeodaria , Hedychium Spicatum , Raw Drug For Practical (Ras Shastra Department- Various Raw Drug For Practical) , Abhraka , Bhallataka , Chitrakamula , Dhattura , Dugdhaphena , Gairika , Gandhaka , Gauripashana , Girisindura , Godanti , Gunja , Haratala , Hingula , Jaharmohra , Jayapala , Kampillaka , Kankshi , Kapardika , Kasisa , Khatika , Kuchala , Langali , Loha Dhatu , Makshika , Manahshila , Muddarshringa , Naga Dhatu , Navasadara , Parad , Pittala Dhatu , Rasaka , Samudraphena , Sarjikshara , Sasyaka , Shankha , Shilajatu , Shukti , Tamra Dhatu , Tankana , Vanga Dhatu , Vatsanabha , Vimala , Yashada Dhatu , Yavakshara , Aamalaki , Aaragvadha , Ajamoda , Arjuna , Ashwagandha , Audbhida Lavana , Babbula Twak , Bakuchi , Bibhitaki , Bida Lavana , Bramhi , Chandana , Chitrakamula , Chavya , Chopchini , Dantimula , Daruharidra , Dashmoola Bharad , Devdara , Dhataki Pushpa , Dhamasa , Erandamula , Go Ghrita , Gokshura , Gomutra , Guduchi , Guggul , Haridra , Haritaki , Hingu , Indrayav , Jatamansi , Karpura , Khadira Kashtha , Krishna Jeeraka , Kushtha , Laksha , Lavang , Lodhra , Manjishtha , Maricha , Musta , Patola , Pippali , Pitta Papada , Punarnava , Raktachandana , Rala/Siktha , Rasnamula , Saidhava Lavana , Sahachara , Sariva , Sauvarchal Lavana , Shatavari , Shati , Shirisha , Shunthi , Tamalpatra , Tila Taila , Triphala Bharada , Twak/Dalchini , Usheera , Vacha , Vanshalochana , Vidanga , Yashtimadhu , Laptops , Smart Board (98”) , Projector , Projector Mount Stand , Projector Screen , Fully Automated Biochemistry Analyser , Fully Automated Haematology Analyser , Colorimeter , Blood Mixer Roller , Iv Set , Iv Set , Pedia Drip Sets , Intracath , Intracath , Intracath , Syringes , Syringes , Syringes , Gauze Sheet , Spirit , Betadene , Betadene , Betadene , Paper Sticking , Paper Sticking , Paper Sticking , Adhesive Sticking 10*4 Mtr , Eusol , Tincture Benzoine , Glycerine I.P. , Liquid Paraffin , Ichthammol Glycerine , Feeding Tube , Feeding Tube , Feeding Tube , Baby Drape Kit , Hand Gloves , Hand Gloves , Hand Gloves , Disposable Needles , Disposable Needles , Disposable Needles , Disposable Needles , Disposable Needles , Blunt Filler Needle , Filter Needles , Insulin Syringe , Ryles Tube , Ryles Tube , Ryles Tube , Ryles Tube , Ryles Tube , Foleys Cathetar , Foleys Cathetar , Foleys Cathetar , Foleys Cathetar , Ot Gown , Eye Goggles For Phototherapy , Thermos , Measuring Jar Set , Measuring Cylinder Set , Measuring Spoon Set , Leg Elevator , Back Rest , Bed Pan , Bed Pan , Urine Pot , Cooker , Drain , Drain , Drain , Silver Nitrate Gel , Roller Bandage , Roller Bandage , Roller Bandage , Urine Bag , Cotton Apron , Bedside Locker , Patient Stretcher , X-Ray View Box , Wheel Chair , Defiblirator , Agnikarma Kit , Dhuma Yantra , Yoga Chair , Iyengar Yoga Wall Ropes , Yoga Straps Stretch Belt , Led Light Source With Fibre Optic Cable And Large Graphical Screen Display For Endoscopy Unit With Hd Endoscopy Camera , 0 Degree - Led Light Source With Fibre Optic Cable And Large Graphical Screen Display For Endoscopy Unit With Hd Endoscopy Camera , 1 Degree - Led Light Source With Fibre Optic Cable And Large Graphical Screen Display For Endoscopy Unit With Hd Endoscopy Camera , 30 Degree - Led Light Source With Fibre Optic Cable And Large Graphical Screen Display For Endoscopy Unit With Hd Endoscopy Camera , 70 Degree - Led Light Source With Fibre Optic Cable And Large Graphical Screen Display For Endoscopy Unit With Hd Endoscopy Camera , Binocular Indirect Ophthalmoscope , Lenses For Ido(Indirect Opthalmoscope) , Lenses For Ido(Indirect Opthalmoscope) , Applanation Tonometer , Schirmer Tear Test Diagnostic Strips , Fluorescein Sodium Strips , Portable Neonate Suction Machine , Iv Plastic Silicon Exntension Tube (Vein O Line) , Iv Plastic Silicon Exntension Tube (Vein O Line) , Three Way , Vein Finder , Urobag With Urometer , Infantometer , Nrbm Face Mask , Nasal Cannula , Oxygen Tubings , Cupping Therapy Kit , Fetoscope , Sigmoidoscope Rigid Or Flexible , Barron Piles Gun , Skin Grafting Knife With Handle , Bone Drill Machine , Bone Cutter , Giggly Saw , Periosteum Elevator , Gabriel Syringe , Resuscitation Kit , Neonatal Laryngoscope , Otoscope , X-Ray Unit (Preferably Digital X-Ray) With Machine And Accessories , Mtp Suction Cannula , Electrocautery , Fumigator , Sthanik Swedan Yantra , Audiometer , Torch , Measuring Tape , Traction Unit Along With Lumbar And Cervical Belts , Interferential Therapy Along With The Wires And Electrodes Transcutaneous Electrical Nerve Stimulation Along With Wires And Electrodes For Physiotherapy. , Ultrasound Therapy Along With Probes , Infra-Red Radiation Therapy , Hot Moist Packs Unit Along With Silica Packs , Cryotherapy Unit Along With Cryo Packs , Laser Therapy , Suspension Therapy Along With The Slings , Parallel Bar , Electrical Stimulation Along With Wires And Electrodes , Musculoskeletal Exercise Equipment Like Shoulder Wheel, Finger-Grip Stretcher, Rebalanced Finger-Grip And The Like , Perineometer , Kegel Cones , Bobath Ball Of Different Sizes , Trampoline , Bolster Of Different Shapes , Sensory Integration Kit , Panchakarma Multi-Purpose Table (All In One) , Steam Generator (Autoclave) , Dasmul Kwath No.1 , Maharasnadi Kwath , Adulsa Compound , Ashwagandharishta , Drakshasav , Saraswatarishta , Abhayarishta , Khadirarishtra , Kanchnar Guggul , Kaishor Guggul , Triphala Guggul , Yograj Guggul , Chandraprabha Vati , Sinhanad Guggul , Triphala Churna (Refill) , Sitopaladi Churna , Hingvashtak Churna , Erendmool Bharad , Avipattikar Churna , Awala Churna , Gokharuphala Churna , Anantmool Churna , Punarnava Churna , Ashwagandha Churna , Manjishtha Churna , Rasnamool Bharad , Dashmul Bharad , Ampachak Vati , Gandharva (Erend)Haritaki Churna , Shankh Vati , Arogyavardhini Vati , Laghusutshekhar Ras , Gandhak Rasayan , Bala Churna , Bala Bharad , Guduchi Bharad , Musta(Nagarmotha)Churna , Gulwel Churna , Suntha Churna , Yashtimadhu Churna , Saraswatarishta Gold , Varunadi Kwath Bharad , Pathyadi Kwath Bharad , Dhatri Loha Vati , Raja Pravartini Vati , Shatavari Churna , Triphala Bharad , Icchabhedi Ras , Abhayadi Modak , Lakshmivilas Ras Vati , Balchaturbhadra Syp/Dysure Syrp , Kasani , Immunocin , Abhraka Bhasma , Arvindasav , Kumari Asava , Kumari Asava , Mahayograj Guggul , Panchtiktaghrita Guggul , Punarnawa Guggul , Trayodashang Guggul , Punarnawa Mandur , Vatavidhwans Ras Vati , Dushivishari Vatika , Chitrkadi Vati , Sanshamani Vati , Sanjivani Vati , Neem Vati , Mahasudarshan Ghan Vati , Vasadi Vati , Nishamalki Vati , Saptamrutaloha Vati , Sukshmatriphala , Kamdudha Ras , Pravalpanchamrut Ras , Shallaki , Lodhra Churna , Dashang Churna , Neempatra Churna , Bakuchi Churna , Haridrakhanda , Dadimashtak(Diegiplus) Churna , Ashwgandha Bharad , Punarnavasava , Punarnavarishta , Paripathadi Kadha , Mahasudarshan Kwath , Bala Tail , Mahanarayan Tail , Eranda Tail , Neem Tail , Karnaj Tail , Kshirbala Tail , Jatyadi Tail , Paracain Eyedrop , Tropicacyl Plus Eye Drop , Chloramphenicol Eye Ointment 1%Aplicaps , Sodium Bicarbonate , Soframycine Ointment , Xylocain Gel , Inj Augmentin 1.2 Gm , Inj Taxim 1G , Inj Zocef 1.5Gm , Inj Metro 100Ml , Inj Pan 40Mg , Inj Emeset 4Mg , Inj Dynapar Aq , Inj Tramadol , Inj Perinorm , Inj Pause 500Mg , Inj Sylate 125Mg , Inj Hydrocortisone 100Mg , Inj Dexa 8Mg , Inj Buscopan , Inj Drotin , T. Amoxclav 625 , T. Zifi Cv , T. Diclo , T. Pan 40 , T.Rablet 20 , Tab. Levoset , T. Rantac 150 Mg , T. Cyclopam , T. Mvbc , T. Zenflox Oz , T. Ondem Md8 , T. Sylate , Liq. Cital , Liq. Lactulose , Syp. Cetrizine , Syp. Amox 250Mg/5Ml , Syp. Pcm 250 , Syp. Wikoryl Ds , Tab. Pcm 650 , Cap. Amox 325 , Tab. Metro 400 , Tab Follic Acid , Tab Iron Follic Acid , Tab Calcium With Vitd3 , Tab Doxylamine Succinate 10Mg , Tab B Complex , Tab Ondensetron 4Mg , Tab Omez 40Mg , Tab Tranexamic Acid 500Mg , Ns 100Ml , Ns 500Ml , Dns 500Ml , D 25% - 100Ml , D 5% - 500Ml , Rl 500Ml , Iv Ep 500Ml , Door Mat , Patient Gown , Patient Pant , Patient Shirts , Bed Sheets , Pillow Cover , Blanckets , Blanckets , Sholapuri Chadar , Napkins , Disposable Patient Cap , Towel , Padiatric Shirts , Padiatric Pants , Padiatric Gown , Peticoats , Drow Sheets , Disposable Sheets(Bedsheet) , Apron(Disposable) , Manjarpat Cloth(Taga) , Lint Cloth , Sateranji

BRR:8645674 Bids Are Invited For Sealing Ring D140/120 Ptfe As Per Drawing 4-55-216- 03050 , Polytetrafluoroethylene (Ptfe) Thread Sealing Tape Total Quantity : 300

BRR:8642938 Bids Are Invited For Title1 - 3 3 5 5 Tetramethylbenzidine , Title2 - Peroxidase From Horseradish , Title3 - Cystamine Dihydrochloride , Title4 - N N Dimethylformamide Dmf , Title5 - Polyethylene Glycol 200 , Title6 - D Plus Glucose , Title7 - Hydrogen Peroxide Solution , Title8 - Potassium Permanganate Ar , Title9 - Sodium Nitrate Acs 99 Percent , Title10 - Zinc Chloride , Title11 - Sodium Sulfide Nonahydrate , Title12 - Sodium Molybdate Dihydrate , Title13 - Phosphate Buffered Saline Ph 7.2 , Title14 - Polyethylene Glycol 2000 , Title15 - Uric Acid , Title16 - Lead Ii Acetate Trihydrate , Title17 - Urease , Title18 - Glucose Oxidase From Aspergillus Niger , Title19 - L Glutathione Reduced , Title20 - Ammonium Persulfate , Title21 - Aniline Acs 99 Percent , Title22 - Glutaraldehyde 25 Percent Aqueous , Title23 - Ctab Hexadecyltrimethylammonium Bromide , Title24 - Silver Nitrate Acs 99 Percent , Title25 - Erythrosin B 90 , Title26 - Erythrosin B , Title27 - Tartrazine , Title28 - Allura Red Ac , Title29 - New Coccine Ponceau 4R , Title30 - Sunset Yellow Fcf , Title31 - Zinc Acetate Dihydrate , Title32 - Lithium Hydroxide Monohydrate , Title33 - N Methylpyrrolidine , Title34 - N Hexane , Title35 - Acetone Acs 99 Percent , Title36 - Isopropanol Ipa Acs 99 Percent , Title37 - Mercuric Chloride Extra Pure , Title38 - N N Diphenylcarbazide Acs , Title39 - Lead Ii Nitrate Acs 99 Percent , Title40 - Ethanol Etoh , Title41 - Pipette Tips 10 Ul , Title42 - Pipette Tips 200 Ul , Title43 - Pipette Tips 1000 Ul , Title44 - Beakers 10 Ml , Title45 - Beakers 50 Ml , Title46 - Beakers 100 Ml , Title47 - Test Tube Stand , Title48 - Beakers 500 Ml , Title49 - Beakers 1000 Ml , Title50 - Beakers 2000 Ml , Title51 - Conical Flasks 500 Ml , Title52 - Conical Flasks 250 Ml Amber , Title53 - Measuring Cylinder Glass 100 Ml , Title54 - Glass Bottles With Blue Cap 250 Ml , Title55 - Glass Bottles With Blue Cap 500 Ml , Title56 - Glass Bottles With Blue Cap 1000 Ml , Title57 - Glass Bottles With Blue Cap 2000 Ml , Title58 - Glass Bottles Amber 250 Ml , Title59 - Glass Bottles Amber 500 Ml , Title60 - Glass Funnel 50 Mm , Title61 - Glass Culture Tubes 20 Ml Clear , Title62 - Glass Culture Tubes 20 Ml Amber , Title63 - Test Tubes 13 Ml , Title64 - Microcentrifuge Tubes 0.5 Ml Clear , Title65 - Microcentrifuge Tubes 1.5 Ml Clear , Title66 - Microcentrifuge Tubes 2 Ml Clear , Title67 - Microcentrifuge Tubes 1.5 Ml Amber , Title68 - Centrifuge Tubes 15 Ml , Title69 - Centrifuge Tubes 50 Ml , Title70 - Amber Centrifuge Tubes 50 Ml , Title71 - 96 Well Microplates , Title72 - Cryovials , Title73 - Wash Bottles 500 Ml , Title74 - Cellulose Nitrate Membrane 0.22 Um , Title75 - Cellulose Nitrate Membrane 0.45 Um , Title76 - Glass Stirrer Rod , Title77 - Glass Spreader , Title78 - Mct Stands 1.5 Ml , Title79 - Cryo Box , Title80 - Minus 20 Degree Mini Cooler 1.5 Ml , Title81 - Zero Degree Mini Cooler , Title82 - Float Rack , Title83 - 96 Place Reversible Rack With Cover , Title84 - Universal Combi Rack , Title85 - Ice Tray 4 L , Title86 - Magnetic Stirrer Bar Set , Title87 - Mortar Pestle 150 Ml , Title88 - Crucible 25 Ml , Title89 - Sample Vials 5 Ml , Title90 - Sample Vials 15 Ml , Title91 - Beaker Tong 12 Inch , Title92 - Aspirator Bottle With Stopcock Pp 10L , Title93 - Filter Paper 125 Mm , Title94 - Spatulas Flat Spoon 4 Inch , Title95 - Spatulas Flat Spoon 8 Inch , Title96 - Parafilm M 4 X 125 , Title97 - Glass Slides , Title98 - Coverslips , Title99 - Petri Dishes Plastic , Title100 - Utility Tray , Title101 - Micropipette 0 To 2 Ul , Title102 - Micropipette 2 To 20 Ul , Title103 - Micropipette 20 To 200 Ul , Title104 - Micropipette 100 To 1000 Ul , Title105 - Indicator Papers Ph 1 To 14 , Title106 - S Line Petri Dishes 90 X 15 Mm , Title107 - Nylon Syringe Filters 25 Mm 0.2 Um , Title108 - Cuvettes Quartz 3.5 Ml , Title109 - Cuvettes Plastic 4 Ml , Title110 - Autoclave Bags , Title111 - Thermometers , Title112 - Kc Examination Gloves , Title113 - Glass Dryer , Title114 - Test Tube Peg Rack , Title115 - Ice Bucket Wit Lid 2.5L Total Quantity : 303

BRR:8667173 Tender For Cc Work In Damage Rapta Of Raukhri Link Road Km 2(400) Under Special Repair - Providing, laying, spreading and compacting stone aggregates of 22.4-53mm sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smoothwheel roller 80-100 kN in stages to proper grade and camber, applying and brooming stone screening / blinding materials to fill up the interstices of coarse aggregates, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. 2 Construciton of un-reinforced, plain joint at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base with 43 grade cement or any other type as per Clause 1501.2.3 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25mm mixed in a concrete mixerof not less than 0.20cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the form work as per drawing. spreading the concrete with shovels, rakes, compacting

BRR:8667115 Tender For Ghugli Kotwa Road To Singha Crossroads Via Mathiya To Badhariya Road - Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled 80-100 kN static rollarin stages to proper grade and camber, applying and brooming stonescreening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density.grade 1 as per Technical specification clause 405. (Excluding GST) 2 Cement Concrete Pavement Construction of un-reinforced, undowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade OPCtype as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, using curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501.(Excluding GST) 3 Earth work in Patri or embankment in ordinary soil loam, clay or sand in patries onboth side of road including ramming dressing required to proper completion of work including all labour T&P etc all complete. as per S.I. NO. 253.(Excluding GST)

BRR:8667112 Tender For Tikri Link Road - Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled 80-100 kN static rollarin stages to proper grade and camber, applying and brooming stonescreening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density.grade 1 as per Technical specification clause 405. (Excluding GST) 2 Item Name :- Cement Concrete PavementConstruction of un-reinforced, undowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade OPCtype as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, using curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501(Excluding GST) 3 Construction of Subgrade and Earthen Shoulders Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1. (Excluding GST)

BRR:8667110 Tender For Sakarauli Dumri Swangi Patti Road To Lalipar Road - Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled 80-100 kN static rollarin stages to proper grade and camber, applying and brooming stonescreening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density.grade 1 as per Technical specification clause 405. (Excluding GST) 2 Item Name :- Cement Concrete PavementConstruction of un-reinforced, undowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade OPCtype as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, using curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 (Excluding GST) 3 Construction of Subgrade and Earthen Shoulders Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1.(Excluding GST)

BRR:8667108 Tender For Patched Road To Southwest Tola Connectivity Road - Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled 80-100 kN static rollarin stages to proper grade and camber, applying and brooming stonescreening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density.grade 1 as per Technical specification clause 405.(Excluding GST) 2 Providing and applying tack coat with bitumen (VG-10) using pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous/granular surfacetreated with primer & cleaned with hydraulic broom as per Technical Specification Clause 503 (Including all taxes required & including Cost of bitumen VG-10) (Excluding GST) 3 Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or cut-back or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a smooth wheeled roller 80-100 kN static rollar capacity, finished to required level and grades to be fallowed by seal coat ase per technical specification clause 508.(Excluding GST) 4 Providing and laying seal coat by manual means with VG-10 Grade Bitumen sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510 (Including all taxes required and hire charges of road roller & including Cost of bitumen ) (Excluding GST) 5 Item Name :- Cement Concrete PavementConstruction of un-reinforced, undowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade OPCtype as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, using curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 (Excluding GST) 6 Construction of Subgrade and Earthen Shoulders Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1. (Excluding GST)

BRR:8667078 Tender For In Year 2025-26 Special Repair Work Of Cc Work In Babai-Sirsa To Nagri Link Road. - Providing laying spreading and compacting stone aggregates of specific size 22.4-53 mm to water bound macadam specificationincluding spreading in uniform thickness, hand packing rolling with smooth wheel roller 80-100 Km in stages to proper grade and camber , MORD G-3 2 Construction ofun-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design,laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, using curing compound (where specified) and water finishing to lines and grade as per drawingand Technical Specification Clause 1501. 3 Providing and applying tack coat with bitumen VG-10 using bitumen distributor @ 0.30 kg / sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per MORD technical specification clause 503 4 20 mm thick Open-Graded Premix Carpet using Bituminous (penetration gradie / modified bitumen) Binder Providing and laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade 5 Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grede and cross fall using Type C as per Technical Specification MORD sepecification no. Clause 510. as per Data Book item No. 5.12 (B) Case - IIIType 6 Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 303.1

BRR:8666777 Tender For Repairing Of Damaged Lining From Km. 6.910 To Km. 6.941 On Lb Of Rgfc - level including lift upto 1.50 m & lead upto 300 mincluding all cost of labour, material, T&P etc complete 2 Dismantaling C.C. work 3 Earth work excavation in cutting/Lip cuttingincluding lift upto 4 m & lead upto 30 m 4 Ordinary centering andshuttering for RCC/CC work i/c all labour,T&P etc complete 5 Anticorrosive/Bitumin painting in two coats on top of sleeper including cost of all material, labour and T&P etc. 6 Supplying & laying L.D.P.E. film 100 micron including cost of all material, labour and T&P etc. 7 Supplying & fixing 10 mm thick thermo coal sheet in expansion joints including cost of all material, labour and T&P etc 8 Supplying & laying water stop PVC NCL or NCT type seal 9 Laying P.C.C. 1:4:8 with stone ballast includingall cost of material, labour, T&P etc complete but excluding centering & shuttering 10 Laying C.C. 1:2:4 with stone ballast includingall cost of material, labour, T&P etc complete but excluding centering & shuttering 11 Ist class brick work in 1:4 C.M. all cost of material, labour, T&P etc complete 12 Supplying and laying C.C Tiles lining in single layer on slope in 1:3 C.M. laid on 10mm thick mortar in 1:3 over 100 mm thick C.C. in1:2:4 including allcost of matrial labour T&P required 13 Construction of porous concrete window including allcost of matrial labour T&P required. 14 Supplying and filling 10 mm wide expansion joints with bituminous filler. 15 Ist class brick work 230 mm thick in 1:4 C.M. all cost of material, labour, T&P etc complete 16 12.50 mm thick plaster 1:4 C.M. i/c all cost of labour, material T&P etc complete

BRR:8666740 Tender for Purchase And Commissioning Of Solar Power System Of 15 Kw At The Top Roof Of Administrative Block For Connecting Electrification Of Centre Block Of J.V. Jain College, Saharanpur , Purchase And Commissioning Of Solar Power System Of 15 Kw At The Top Roof Of Administrative Block For Connecting Electrification Of Centre Block Of J.V. Jain College, Saharanpur , Solar Panel Plate - Utl/Luminous/Seemac/Tata , Inverter Cum Ups 15Kw - Utl/Luminous/Seemac/Tata , Solar Battery 200/150Ah - Utl/Luminous/Exide , Dcdb - Utl/Luminous/Seemac/Tata And Earthing Of Solar System , Cable For Solar 6-8Mm Or 10Mm Including 3 Core Cable For Input Power To The Office Lying Vacant Near Accountant Office I.E. Place Of Establishment Of Ups And Batteries , Civil Work - Angle Iron Frame Work For Fixing Of Solar Plates At The Roof Of Top Of Adm. Block Including Drilling, Welding, Labour With All Tools And Plants , Arrangement For Washing Of All Solar Panels Mounted On Roof Of Adm. Block And Central Library (Compressor Pump - 1Hp) , After Installation With One Year Free Service Cover , Electrification Work For Supply Of Solar Power For Providing Solar Power To Lecture Room No. 9-15 And Connected Offices And Departments I.E. Dsw, Proctorial Board, Commerce, Maths, Pol.Sc., Kalangan Hall, Sociology, History, Geology And Chemistry Dept. With Laboratories From Main Switch Including All Electrical Gadgets (Separate Mcb Should Be Installed At Each Office/Department & Main Mcb At Main Switch), Wires And Other Accessories Inter-Alia Electrification Including Wires And Changeover For Connecting The Surrounding Led Lights Of Centre Block With Solar Panel , Work Of Shifting Of Online Ups Of 15Kw Along With Batteries And Related Complete Accessories Of Solar Power System From Gallery Of Teacher Education Dept. To The Office Lying Vacant Near Accountant Office With New Cable Of 6 To 10 Mm Required For Shifting And Any Other Civil/Electrification Work Like Mcb, Main Switch Etc. As Per Requirment Of S

BRR:8665797 Tender for Supply, Installation, Commissioning And Testing Of 4 Tph Fully Automatic Rice Mill With Colour Sorter 3 Tph And Air Compressor 129 Cfm Machinery , Supply, Installation, Commissioning And Testing Of 4 Tph Fully Automatic Rice Mill With Colour Sorter 3 Tph And Air Compressor 129 Cfm Machinery , 4 Tph Fully Automatic Rice Mill ( Detail Specification Given In Tender Document ) , Colour Sorter 3 Tph ( Detail Specification Given In Tender Document ) , Air Compressor 129 Cfm ( Detail Specification Given In Tender Document ) , Supply, Installation, Commissioning And Testing Moulded Chamber Burnt Bricks With Including Cost And Conveyance Of All Materials And Including All Labour Charges Etc Complete , Transportation And Other Charges

BRR:8665571 Tender For Provision Of Misc Em And Br Works At Af Stn Memaura.; 1 Excavation in post hole (or similar hole) each n exc 0.50 cum, getting out returning filling in and ramming earth or broken rubble mixed with earth around in layer n. exc 25 cm etc and getting out soft/ loose soil complete all as specified and directed 2 M&L cement concrete type C-2 1:3:6 (40mm graded stone agg.) as in post holes complete all as specified and directed.. 3 M&L for Mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips conforming to Gd I, IS-432 (Part-I) Complete all as specified and directed 4 Supply only Chain Link MS galvanized fencing of 4.00 mm dia of wire and 75 mm aperature complete all as specified and directed 5 Fixing Only Chain Link fencingincluding line wires, any mess, size and type to any type of standards, rails, straining bolts, etc including provision of binding wires, complete all as specified and directed 6 S&F for mild steel work as in posts and struts etc in fencing including cutting tops to shapes as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165 complete all as specified 7 M&L for mild steel Framed structural work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing of Fe-410-0 (Gde-E-250) complete all as directed by Engr-in-charge 8 S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. 9 M&L for preparation of newly untreated steel surface and applying two coats of synthetic enamel paint over a coat of Red oxide primer exc 10 cm width or girth, not otherwise described complete all as specified and directed. 10 Demolition ofbrick work or stone/boulder masonary built in cement mortar includingall quoins arches pillars etc. complete all as specified and directed . 11 Material & labour for rendering 15 mm thick on other than fairfaces of brick work or concrete surfaces in CM (1:6) surfaces finished even and fair faces without using extra cement complete all as specified and directed. 12 M & L for prepration of new plastered or unplastered surfaces of wall applying two coats of oil bound distemper complete all as specified and directed. 13 S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for frames of doors, windows & ventilators with one or more rebates including jointing cleat for fixing etc complete all as specified and directed. 14 S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for of doors, windows & ventilators shutters,without Sash bar, aluminium section weighting 0.55 Kg/M including necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws etc, complete all as specified and directed. 15 S&F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average widh of aperture 1.40mm and fixed with aluminium wire staples 16 S&F 3.8 mm thick tinted glass of approved make and colour complete all as specified and directed 17 M&L for ACP Sheet of 3mm thick of approved make & Colour fixed to aluminum frame work with screw with all necessary accesories etc all as specified and directed by Engr-in -charge. 18 Supply & fix aluminium anodizedbarrel tower bolts 200mm long, of extruded section complete all as specified & directed. 19 S&F 100 mm long Aluminium powder coated tower bolt complete all as specified and directed 20 S&F 100 mm long Aluminium powder coated handle complete all as specified and directed 21 M&L Door closer hydraulically regulated designation No 1 universl type Aluminium (extruded section body) complete all as specified and directed 22 Supply, installation, testing and comissioning of Metal Top Deep Freezer, of capacity 400 ltr or nearest available next size double door (White/Grey colur), (-) 18 degree Cel, as approved with suitable locking arrangement working on electric driven Non-CFC eco-friendly refrigerant gas having direct cooling techonology, 1 x Freezer self including two drawers with LED interior lighting, top opening, recess handle with wheel support with 3 star or above star energy rating suitable for single phase, 230 V system andincluding writing MES Number having letter size of height 3 cm with black paint complete all as specified and as directed. Make :Blue Star/Voltas/Haier 23 Supply, installation, testing and comissioning of water cooler fully stainless steel storage type, ISI marked, Electric driven 230 Volt, 50 Hz, Single Phase Supply complete with all internal accessories, stainless steel body and tank, power saving PUF insulation, adjustable cold water thermostat, 10 degree to 25 degree centigrade auto cut off facility, overload protection, stainless steel front panel, extended plastic legs, eco-friencly version with non CFC refrigerant, energy efficient conforming to relevant IS and PF shall not be less than 0.85 compressor and approx storage capacity of 60 litres and nominal cooling capacity of 120 litres per hour and including writing MES Number having letter size of height 3 cm with black paint completeall as specified and as directed. Makes:-USHA/VOLTAS/BLUE STAR 24 Supply ,installation testing & commissioning of2 Ton air cooled inverter split Air Conditioner split type, Hi wall split unit indoor/ outdoor complete with cordless remote control unit and with in built air isoniser and plasma filter for better indoor air quality with BEE 3 star or above rating witheco-friendly Non-CFC refrigerant suitable for environment including writing of MES Number having letter size of height 3 cm with black paint on both indoor and outdoor unit.Complete all as specified and directed. Note : 1) The quoted rate is deemed to be inclusive of suitable size copper tube having length not less than 3 mtr from indoor to outdoor unit.2) the cost of copper tube exc.3 mtr will be paid and measured separately in respective item of schedule. Make : LG / Career / Voltas / Blue Star or euivalent. 25 S & F of elctronic Voltage stabilizer for automatic operation, Copper winding heavy duty single phase naturally air cooled indoor type & designed for input variation between 150 V to 285 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity suitable for 2.0 Ton AC including writing of MES Number having letter size of height 3 cm with black paint on voltage stabilizer complete all as specified and as directed. Make : Volina Model No-VCDW-O5150, or equivalent in Sinetrac,Vinitec. 26 Supply and fix factory made MS Bracket for fixing of outdoor unit of Air Conditioner on wall/on floor complete all as specified and as directed. 27 S & F ofsuction and discharge copper tube for 1.5/2.0 Ton split AC of suitable size for suction and discharge lines for split type air conditioners including necessary brazing, wrapping up puff insulation, testing on completion all as specified and as directed.Note:- One run each of suction and discharge pipes shall be measured as one unit length. 28 M&L sub main wiring alongwith earthwire for two single core 4 sqmm size sub main wiring with one single core 4 sqmm size earthwire drawn into and including one run 25 mm or higher dia PVC conduit fixed concealed.PVC insulated PVC unsheathed multi-stranded copper conductor cable FRLS in and including PVC conduit medium grade ISI marked, fixed concealed of size as mentioned belowcomplete with all conduit all accessories / fittings as required at site and connecting of earthwire to common earth dolly complete all as specified and directed.Note :- Three run of 4 sqmm copper cable and one run of conduit shall be measured as one unit. 29 Supply and fixing concealed type GI sheet enclosure for Modular switches/sockets etc. complete with a 20 amps modular type motor starter (2 module) with one single pole modular type C curve MCB of capacity 20 Amps (1 module) & a 20 Amps 3 pin Module socket (2 module) including 20 A plug top and electrical connections all as specified and directed. (For Air conditioners) 30 M & L for 6 and 16 Amp switch socket combination Point wiring with 1100 volt grade PVC insulated-unsheated 2.5 Sqmm (FRLS) multistraded copper conductor cable drawn in and including concealed PVC conduit of size 20/25mm ISImarked inclusive oftees, bend, elbows etc upto and including sunk in anodized pressed steel box for housing/fixing 6 and 16 S/S combination etc with white laminated 3 mm thick hylum sheet cover ISI marked of suitable size complete including PVC insulated multi stranded copper conductor 2.5 Sqmm FRLS cable as earth wirecomplete all as specified and directed.Make : (i) For Cable : Polycab/Havells/Anchor/KEI(ii) For Conduit : AKG/Bhagwati Plastic/Agriculture IndustriesNote : (i) The Qouted rate is deemed to be inclusive of chases cutting.(ii) Cutting chases for concealed shall be make good using CM 1:4 and surface finished to match with the existing surface and colour. 31 S & F Switch Socket combination 2 in1,3 Pin 6 and 16 Amp flush type universal complete all as specified and directed. Make : Anchor/ Havells/ Fine/SSK 32 M&L sub main wiring alongwith earthwire for two single core 2.5 sqmm size sub main wiring with one single core 2.5 sqmm size earthwire drawn into and including one run 25 mm or higher dia PVC conduit fixed concealed.PVC insulated PVC unsheathed multi-stranded copper conductor cable FRLS in and including PVC conduit medium grade ISI marked, fixed concealed of size as mentioned belowcomplete with all conduit all accessories / fittings as required at site and connecting of earthwire to common earth dolly complete all as specified and directed.Note :- Three run of 2.5 sqmm copper cable and one run of conduit shall be measured as one unit. 33 M & L for point wiring complete in wall/roof/ceiling surface etc, suitable for normal plates incl necessary cutting/chasing etc and making good the disturbed surface with single core, multistranded PVC insulated copper conductor cable 1100 volts grade for FRLSH size 1.5 sqmm in and including concealed stove enamelled steel conduit and accessories with one single core PVC insulated unsheated 1.5 Sqmm multistranded copper conductor as earth continuity wire and connected to earth dolly for fixing of flush box, fixed with brass screws and cap washers for one light/fan point controlled by one number one No MCB complete all as specified and directed.Make : (i) For Cable : Polycab/Havells/Anchor/KEI(ii) For steel Conduit : JPC Pipes pvt LtdNote : (i) The Qouted rate is deemed to be inclusive of chases cutting.(ii) Cutting chases for concealed shall be make good using CM 1:4 and surface finished to match with the existing surface and colour. 34 S & F LED light fitting 1x16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size including removing of unserviceable fittings and making good disturbed surface complete all as specified and directed. 35 Supply & fixing flame proof switch rotary type with termination box in LM6, 16A double pole 250 Volt all as specified and directed. 36 Supply and fix in replacement of sheet metal enclosure distribution board, single pole and neutral, AC, 240 volt, 2 way, double door with 100 Amp rated copper bus bar and metal door with IP - 43 & IK 09 protection and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed. 37 S & F MCB single pole 240 volts, C curve of rating from 6 to 32 amps, with rupturing capacity 10 KA,including providing thimble for out going cables.

BRR:8665569 Tender For Repair And Maint Of Stand By Dg Sets, Control Panels, Switch Amf Panels And Other Connected Worksat Tbrl Range Ramgarh Area; 1 Material and labour for conducting ‘B’ check of DG sets of 25 KVA to 62.5 KVA capacities to carry out maintenance/servicing as given below complete all as specified and directed. (i) Change of diesel filter/oil filter, air filter, replacement of engine oil etc.(ii) Check and clean engine, alternator battery, instrument panel, elect panel, Timer, Contactors ,Meters and others etc.(iii) Tightening of all nuts & bolts of DG set and its accessories.(iv)Check for any diesel leakage from any point and rectify if observed.(vii)Check electrical connections of engine .The wiring shall be maintained properly and engine starting system from engine instrument panel is to be kept in order. (viii)Check and tighten the AVM pads nuts and bolts, change AVM pads if found damaged. AVM to be provided by contractor.(xiii) Oiling, Greasing and checking for proper & smooth functioning and testing on load completeNote 1. :- Price for minor spare parts like nut bolts, grease, copper conductor cable for control wiring, AVM pads will be included in the quoted rates against each capacity.2. Price for major spare parts diesel filter, oil filter, air filter, engine oil and coolant required for replacement shall be measured and paid for separately under respective item of schedule. 2 All as per serial item no 1 above but for 82.5 KVA to 125 KVA DG set-ditto- 3 All as per serial item no 1 above but for 180 KVA to 250 KVA DG set -ditto- 4 All as per serial item no 1 above but for 320 KVA to 400 KVA DG set-ditto- 5 All as per serial item no 1 above but for 600 KVA to 810 KVA DG set -ditto- 6 Supply only new fuel oil filter elements with O ring for 25 KVA to 62.5 KVADG Set complete all as specified and directed. 7 All as per serial item no 6 above but for 82.5 KVA to 125 KVA DG set -ditto- 8 All as per serial item no 6 above but for 180 KVA to 250 KVA DG set -ditto- 9 All as per serial item no 6 above but for 320 KVA to 400 KVA DG set-ditto- 10 All as per serial item no 6 above but for 600 KVA to 810 KVA DG set-ditto- 11 Supply only new lubricant oil filter cartridge element with O ringfor25 to 62.5KVADG set complete all as specified and directed. 12 All as per serial item no 11 above but for 82.5 KVA to 125 KVA DG set-ditto- 13 All as per serial item no 11 above but for 180 KVA to 250 KVA DG set -ditto- 14 All as per serial item no 11 above but for 320 KVA to 400 KVA DG set -ditto- 15 All as per serial item no 11 above but for 600 KVA to 810 KVA DG set-ditto- 16 Supply only new air filter (both outer & inner) element with O ringfor25 KVAto 62.5 KVA DG set complete all as specified and directed. 17 All as per serial item no 16 above but for 82.5 KVA to 125 KVA DG set-ditto- 18 All as per serial item no 16 above but for 180 KVA to 250 KVA DG set -ditto- 19 All as per serial item no 16 above but for 320 KVA to 400 KVA DG set -ditto- 20 All as per serial item no 16 above but for 600 KVA to 810 KVA DG set -ditto- 21 Supply only of Engine oil (15W40 or eq.) grade for DG set complete all as specified and directed. 22 Supply only coolant of specific grade forDG set complete all as specified and directed. 23 Supply only for filling of distilled water for battery complete all as specified and directed. 24 Taking down and dismantling all the components from engine assembly of 25 KVA to 62.5, diesel engine, segregating serviceable and semi/unserviceable parts, decarbonisation, cleaning all interior & exterior parts after disconnecting theout-going connection of diesel engine from the panel board, repair /replacement of defective spares and re assembling the DG set after completion of work and make it serviceable complete all as specified and directed. Note: (i) Spare parts/ components measured and paid for separately under relevant items. (ii) Cost of transportation of defective components from site of work to workshop (if any) shall deemed to be included in the unit quoted rate 25 All as per serial item no 24 above but for 82.5 KVA to 250 KVA DG set-ditto- 26 All as per serial item no 24 above but for 320 KVA to 400 KVA DG set-ditto- 27 Repair/re-conditioning of cylinder head (as dismantled under serial item No. 24 above) including machine work of 25 KVA to 62.5 KVA DG set complete all as directed. 28 Repair/re-conditioning of cylinder head (as dismantled under serial item No. 25 above) including machine work of 82.5 KVA to 250 KVA DG set complete all as directed. 29 Repair/re-conditioning of cylinder head (as dismantled under serial item No. 26 above) including machine work of 320 KVA to 400 KVA complete all as directed. 30 Repair/re-conditioning of cooling pump with its all assembly, pipes and clamping ring, engine mounted (as dismantled under serial item No. 24 to 26 above) including machine work of any capacity complete all directed. 31 Repair/overhauling turbo-charger (as dismantled under serial item No. 24 to 26 above) including repair/replacement of unserviceable spares of any capacity complete all as specified and directed. 32 Repair/calibration and testing of injectors (as dismantled under serial item no. 24 to 26 above) of any capacity complete all as directed. 33 Overhauling and testing of governor assembly (as dismantled under serial item No. 24 to 26 above) of any capacity Including machine work complete all as specified and directed. 34 Material and labour for repair of fuel injection pump/pt pump including dismanting the fuel injection/ pt pump, segregating serviceable and semi/unserviceable parts, replace all unserviceable parts and cleaning serviceable parts, drying, lubricating, re-assembling the FIP/PT pump with cleaned serviceable parts along with new parts as required , calibration, testing complete on computerised testing equipment all as directed. 35 Supply only piston suitable for DG engine 25 KVA to 62.5 KVA complete all as specified and directed. 36 Supply only cylinder liner suitable for DG engine 25 to 62.5 KVA complete all as specified and directed 37 Supply only piston ring set suitable for DG engine 25 to 62.5 KVAcomplete all as specified and directed. 38 Supply only piston pin suitable for DG engine 25 to 62.5 KVA complete all as specified and directed. 39 Supply only piston circlips suitable for DG engine 25 to 62.5 KVA complete all as specified and directed. 40 Supply only O seal ring, first groove suitable for DG engine 25 to 62.5 KVA complete all as specified and directed. 41 Supply only O seal ring, 2nd & 3rd groove suitable for DG engine 25 to 62.5 KVA complete all as specified and directed. 42 Supply only main bearing upper & lower suitable for DG engine 25 to 62.5 KVA complete all as specified and directed. 43 Supply only oil seal ring suitable for DG engine 25 to 62.5 KVA complete all as specified and directed. 44 Supply only radiator cap suitable for DG engine 25 to 62.5 KVA complete all as specified and directed. 45 Supply only thrust bearing suitable for DG engine 25 to 62.5 KVA complete all as specified and directed. 46 Supply only inlet/exhaust valvesuitable for DG engine 25 to 62.5 KVA complete all as specified and directed. 47 Supply only inlet/exhaust valve seat ring suitable for DG engine 25 to 62.5 KVA complete all as specified and directed. 48 Supply only valve guide suitable for DG engine 25 to 62.5 KVA complete all as specified and directed. 49 Supply only valve collet suitable for DG engine 25 to 62.5 KVA complete all as specified and directed. 50 Supply only valve stem cap suitable for DG engine 25 to 62.5 KVA complete all as specified and directed. 51 Supply only valve seal suitable for DG engine 25 to 62.5 KVA complete all as specified and directed. 52 Supply only washer for cylinder head cover suitable for DG engine 25 to 62.5 KVA complete all as specified and directed. 53 Supply only seal ring (rocker arm) suitable for DG engine 25 to 62.5 KVA complete all as specified and directed. 54 Supply only water drain cock sub assembly suitable for DG engine 25 to 62.5 KVA complete all as specified and directed. 55 Supply only front oil seal suitable for DG engine 25 to 62.5 KVA complete all as specified and directed. 56 Supply only rear oil seal suitable for DG engine 25 to 62.5 KVA complete all as specified and directed. 57 Supply only connecting rod bearing suitable for DG engine 25 to 62.5 KVA complete all as specified and directed. 58 Supply only connecting rod bush suitable for DG engine 25 to 62.5 KVA complete all as specified and directed. 59 Supply only oil sump washer suitable for DG engine 25 to 62.5 KVA complete all as specified and directed. 60 Supply only inlet pipe for feed pump suitable for DG engine 25 to 62.5 KVA complete all as specified and directed. 61 Supply only v-belt suitable for DG engine 25 to 62.5 KVA complete all as specified and directed. 62 Supply only copper washer suitable for DG engine 25 to 62.5 KVA complete all as specified and directed. 63 Supply only HCT switch suitable for DG engine 25 to 62.5 KVA complete all as specified and directed. 64 Supply only thermostat body suitable for DG engine 25 to 62.5 KVA complete all as specified and directed. 65 Supply only radiator water inlet hose suitable for DG engine 25 to 62.5 KVA complete all as specified and directed. 66 Supply only radiator water outlet hose suitable for DG engine 25 to 62.5 KVA complete all as specified and directed 67 Supply only thermostat element suitable for DG engine 25 to 62.5 KVA complete all as specified and directed. 68 Supply only pistonsuitable for DG engine 82.5 KVAto 250 KVA complete all as specified and directed 69 Supply only cylinder liner suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed 70 Supply only piston ring set suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed. 71 Supply only piston pin suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed. 72 Supply only piston circlips suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed. 73 Supply only o seal ring, first groove suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed. 74 Supply only o seal ring, 2nd & 3rd groove suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed. 75 Supply only main bearing upper & lower suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed. 76 Supply only oil seal ring suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed. 77 Supply only radiator cap suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed. 78 Supply only thrust bearing suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed. 79 Supply only inlet/exhaust valvesuitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed. 80 Supply only inlet/exhaust valve seat ring suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed. 81 Supply only valve guide suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed. 82 Supply only valve collet suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed. 83 Supply only valve stem cap suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed. 84 Supply only valve seal suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed. 85 Supply only washer for cylinder head cover suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed. 86 Supply only seal ring (rocker arm) suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed. 87 Supply only Water drain cock sub assembly suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed. 88 Supply only front oil seal suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed. 89 Supply only rear oil seal suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed. 90 Supply only connecting rod bearing suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed. 91 Supply only connecting rod bush suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed. 92 Supply only oil sump washer suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed. 93 Supply only inlet pipe for feed pump suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed. 94 Supply only v-belt suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed. 95 Supply only copper washer suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed. 96 Supply only HCT switch suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed. 97 Supply only thermostat body suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed. 98 Supply only radiator water inlet hose suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed. 99 Supply only radiator water outlet hose suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed. 100 Supply only thermostat element suitable for DG engine 82.5 KVA to 250 KVA complete all as specified and directed. 101 Supply only piston suitable for DG engine 320 KVAto 400 KVA complete all as specified and directed 102 Supply only cylinder liner suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed 103 Supply only piston ring set suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed. 104 Supply only piston pin suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed. 105 Supply only piston circlips suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed. 106 Supply only o seal ring, first groove suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed. 107 Supply only o seal ring, 2nd & 3rd groove suitable for DG engine 320 KVA to 400 KVA KVA complete all as specified and directed. 108 Supply only main bearing upper & lower suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed. 109 Supply only oil seal ring suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed. 110 Supply only radiator cap suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed. 111 Supply only thrust bearing suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed. 112 Supply only inlet/exhaust valvesuitable for DG engine 320 KVA to 400 KVA complete all as specified and directed. 113 Supply only inlet/exhaust valve seat ring suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed. 114 Supply only valve guide suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed. 115 Supply only valve collet suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed. 116 Supply only valve stem cap suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed. 117 Supply only valve seal suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed. 118 Supply only washer for cylinder head cover suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed. 119 Supply only seal ring (rocker arm) suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed. 120 Supply only water drain cock sub assembly suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed. 121 Supply only front oil seal suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed. 122 Supply only rear oil seal suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed. 123 Supply only connecting rod bearing suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed. 124 Supply only connecting rod bush suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed. 125 Supply only oil sump washer suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed. 126 Supply only inlet pipe for feed pump suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed. 127 Supply only v-belt suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed. 128 Supply only copper washer suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed. 129 Supply only HCT switch suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed. 130 Supply only thermostat Body suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed. 131 Supply only radiator water inlet hose suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed. 132 Supply only radiator water outlet hose suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed. 133 Supply only thermostat element suitable for DG engine 320 KVA to 400 KVA complete all as specified and directed. 134 Dismantling of self-starter 24V DC by disconnecting battery connection, taking out to civil workshop for carrying out following repair work and refixing including testing complete: - (i) Rewinding of armature & field coil. (ii) Replacement of carbon brush and solenoid switch (iii) Replacement of gear assembly all as specified and directed. 135 Dismantling of self-starter 12V DC by disconnecting battery connection, taking out to civil workshop for carrying out following repair work and refixing including testing complete: - (i) Rewinding of armature & field coil. (ii) Replacement of carbon brush and solenoid switch (iii) Replacement of gear assembly all as specified and directed. 136 Material and labour for repair of alternator 3 phase 440V of any capacity DG set, including dismantling the alternator from its mounting by unscrewing the nut & bolts. cleaning the whole assembly of alternator, replace the commutator, carbon brush, rectifier, slip rings, slip ring end bearing drive end bearing etc andre-assembling the all parts and mounted the alternator on its same place and do the connection as previous complete all as specified and directed . 137 Dismantling of defective dynamo from engine, supply and fixing new dynamo 24 volt DC, including replacement of worn out nuts bolts mounting clamp etc. complete all as specified and as directed. 138 Supply and replacement self-starter 12 volts DC suitable for DG Set 63/82.5/110 KVA complete all as specified and directed. 139 Supply and replacement self-starter 24 volts DC suitable for DG set 125/200/250/320/400 KVA complete all as specified and directed. 140 Opening the coupling of DG set of capacity 82.5 to 400 KVA the outer cover and taking out the fly wheel ring and shifting to workshop for repair in and including replacement of fly wheel ring by pressing machine and reinstalled the same after repair to make it fully functional complete all as specified and directed. 141 Supply and replacement of compact type battery charger unitsuitable for charging01 battery ,12 V 180 AH complete all as specified and directed with 2m copper leads -02 Nos & brass clamps complete all as specified and directed 142 Material and labour cleaning of diesel tank of DG set of any capacity including replacement of worn out pipe line and measuring scale and fixing in original position and make it leak proof with necessary clamps complete all as specified and directed. 143 Supply and fixing battery 12V, 150 AH with 25 nos electro plates including battery lead positive & negative battery terminal complete duly charged . Make exide (brand : exide express) or equivalent all as specified and directed. 144 Supply and fixing battery 12V, 160 AH pulse ultra lite, maintenance free including battery lead positive & negative battery terminal complete duly charged . make - cummins part No. AX1012845 or equivalent complete all as specified and directed. 145 Supply and fixing battery 12V, 180 AH with 25 Nos electro plates including battery lead positive & negative battery terminal complete duly charged . Make Exide (brand : exide express) or equivalent complete all as specified and directed 146 Supply and fixing in repair automatic voltage regulator suitable for 25 KVAto 82.5 KVAas per sample complete all as specified and directed. 147 Supply and fixing in repair automatic voltage regulator suitable for 100 KVAto 250 KVAas per sample complete all as specified and directed. 148 Supply and fixing in repair automatic voltage regulator suitable for 320 KVAto 810 KVAas per sample complete all as specified and directed. 149 Repair to existing unserviceable automatic main failure (AMF) panel of any capacity installed at various locations by carrying out the following repair work:(a) Disconnecting the incoming power supply and taking out and dismantling the electrical components from the AMF panel of any make and replacement of unserviceable/burn out/defective parts and cleaning/servicing entire interior and exterior serviceable parts and refixing the same in existing position including connections, testing and commissioning etc complete all as specified and directed.(Note: (i) Spare/parts shall be measured and paid for separately as supply only under respective items here-in-below. (ii)fixing charge for spare/part, control wiring (copper conductor cable FRLS) of any size, cleaning of panel, replacement of unserviceable lock and any type welding work used for repair the panel shall deemed to be inclusive under this item. 150 Supply only MCB, SP, 6-32 amps, C curve suitable for AMF panel 35-250 KVA complete all as specified and directed. 151 Supply only MCB, SPN, 6-32 amps, C curve complete all as specified and directed. 152 Supply only MCB, TPN, 6-32 amps, C curve complete all as specified and directed. 153 Supply only instrument operating relay, coil voltage 12 volts DC suitable for AMF panel complete all as specified and directed. 154 Supply only 3 pole power contactors type MNX-185 (185 amp) with suitable coil voltage or equivalent as per site requirement complete all as per Make : L & T or equivalent all as per specified and directed. 155 Supply only 4 pole power contactors type KCL64 225 (225 amp) with suitable coil voltage or equivalent as per site requirement complete all as per Make :Kirloskar or equivalent all as per specified and directed. 156 Supply only 3/4 pole power contactors MNX 400 (400 amp)with suitable coil voltage or equivalent as per site requirement complete all as per Make :L&T, GE, Havells, Kirloskar or equivalent all as per specified and directed. 157 Supply only selector switch suitable for AMF panel of any capacity complete all as specified and directed. 158 Supply only digital panel meter with built in transducer suitable for AMF panel of any capacity complete all as specified and directed. 159 Supply only oil pressure meter suitable for AMF panel of any capacity complete all as specified and directed. 160 Supply only lubricant oil temp meter suitable for AMF panel of any capacity complete all as specified and directed. 161 Supply onlyheat temp meter suitable for AMF panel of any capacity complete all as specified and directed. 162 Supply only battery charging meter suitable for AMF panel of any capacity complete all as specified and directed. 163 Supply only current transformer, copper wound suitable for any capacity complete all as specified and directed. 164 Supply only relay timer 0.6 S-60M*2 C/O suitable for AMF panel of any capacity complete all as specified and directed. 165 Supply only standard push button and selector actuators suitable for AMF panel of any capacity complete all as specified and directed. 166 Material and labour for replacement of AMF panel controller suitable of DG set of capacity 25 KVA to 125 KVA complete all as specified and directed. 167 Material and labour for replacement of AMF panel controller suitable of DG set of capacity 180 KVA to 380 KVA complete all as specified and directed. 168 Supply and fixing in replacement MCCB 125 amp 16 KA, 3 pole, adjustable type complete all as specified and directed. 169 Supply and fixing in replacement MCCB 160 amp 36KA,3 pole, adjustable type complete all as specified and directed.. 170 Supply and fixing in replacement MCCB 200 amp 36KA, 3 pole, adjustable type complete all as specified and directed.. 171 Supply and fixing in replacement MCCB 250 amp 36 KA, 4 pole, adjustable type complete all as specified and directed. 172 Supply and fixing in replacement MCCB 400 amp 36KA, 4 pole, adjustable type complete all as specified and directed. 173 Supply and fixing in replacement MCCB 630 amp 50KA, 4 pole, adjustable type complete all as specified and directed. 174 Supply and fixing ofon-load type changeover switch 400 amp, 415 volt, open enclosure type complete all as specified and as directed. Make: Havells/L&T/BCH/Schneider 175 Supply and fixing ofon-load type changeover switch 250 amp,415 volt, open enclosure type complete all as specified and as directed. Make: Havells/L&T/BCH/Schneider 176 Supply and fixing ofon-load type changeover switch 200 amp, 415 volt, open enclosure type complete all as specified and as directed. Make: Havells/L&T/BCH/Schneider 177 Supply and fixing ofon-load type changeover switch 100 amp, 415 volt, with SSenclosure type complete all as specified and as directed. Make: Havells/L&T/BCH/Schneider 178 Supply, installation, testing and commissioning cummins power command controller (PCC 3300) Part No. A054J968 for DG set as per existing or equivalent. complete all as specified and directed. 179 Supply, installation, testing and commissioning cummins PCB assembly for DG Set Part No. 0327-1507 as per existing or equivalent. complete all as specified and directed. 180 Supply, installation, testing and commissioning cummins Aux 105 PCB board for DG Set Part No. A028T766 as per existing or equivalent. complete all as specified and directed. 181 Supply, installation, testing and commissioning cummins electronic control panel, genset Dg controller part no. 4083935 as per existing or equivalent. complete all as specified and directed. 182 Supply, installation, testing and commissioningcummins power command HMI 211,24V DC for DG set as per existing or equivalent. complete all as specified and directed. 183 Supply, installation, testing and commissioning of factory made and tested AMF panel for 250 KVA DG set indoor type, platform mounted, suitable for 415 volts 3 phase and neutral, 4 wire, 50Hz AC supply system. The panel shall be dust and vermin proof, protection class (IP-65) and made of out of not less than 2.0 mm thick CRCA mild steel sheet and mild steel, mounting channel work made out of 75 mm ), front opening type with proper ferrule & cable gland, internal wiring with PVC insulated multistranded copper conductor FRLS cable of adequate size but not less than 1.5 sqmm complete. All steel metal works including frame shall be with anticorrosive coating with seven tank process and finally epoxy polyester powder coating of Siemens grey shade 7035. The scope of work also comprising of the following:- 184 (a)Under voltage relay 415V AC for main -1 No. (b) Under voltage relay 415 V AC for DG - 1 No.(c) AC Timer 230 Volt , 2 No. +2 NC - 1 No.(d) DC timer 12/24 V -1No.(e) Control MCB SP 6 Amp.230 V – 9 Nos.(f) Control MCB SP 16 Amp.230 V – 2 Nos.(g) Battery charger 12/24 DC with SMPS- 1 No. (h) LED indicating light for main & DG—6 Nos(j) LED indicating light for main and gen. On – 2 nos.(k) LED Indicating Light for battery Charger –1 No.(l) Digital Volt meter ( 0-500 V ) 96 mm X 96 mm with Selector switch - 1 Set. (m) Digital Amp meter ( 0-100 A ) 96 mm X 96 mm with Selector switch - 1 Set.(n) CT Coil 350 / 5 A - 3 Nos.(o) DC Volt Meter 15/30 V - 1 No.(p) DC Amp Meter0-15 A - 1 No.(q) Trickle / Boost switch –2 Nos.(r) Auto / Manual Selector Switch ---1 No.(s) Start & Stop Push Button- 2 Nos.(t) 4 point alarm annunciator with inbuilt hooter ,test, accept& resetpush button, 12/24 V DC - 1 No(u) Power Contactor 350 A 3 Pole 415V AC for DG - 1 No.(v) Power Contactor 350 A 3 Pole 415V AC for Main - 1 No.(w) Incoming MCCB 350 A 36 KA 3 Pole Thermal Magnetic release adjustable type for Main & DG Supply - 2 Nos(x) AMF controller 24V DC - 01 No. (y) Aux Relay, coil voltage 24 DC ,14 pin - 06 No. (z) Interconnecting Aluminium Link from MCCB to Contactors with Incoming & Outgoing- 1 Set.(aa) PCC foundation as per manufacturers instruction. complete all as specified and directed. 185 Supply, installation, testing and commissioning of factory made and tested AMF panel for 82.5 KVA DG set outdoor type, platform mounted, suitable for 415 Volts 3 Phase and neutral, 4 wire, 50Hz AC supply system. The panel shall be dust and vermin proof, protection class (IP-65) and made of out of not less than 3.15 mm thick CRCA mild steel sheet and mild steel, Mounting Channel work made out of 75 mm ), front opening type with proper ferrule & cable gland, internal wiring with PVC insulated multistranded copper conductor FRLS cable of adequate size but not less than 1.5 sqmm complete. All steel metal works including frame shall be with anticorrosive coating with seven tank process and finally epoxy polyester powder coating of Siemens grey shade 7035. The scope of work also comprising of the following:- 186 (a)Under Voltage relay 415V AC for main -1 No.(b) Under voltage relay 415 V AC for DG - 1 No.(c) AC Timer 230 Volt , 2 No. +2 NC - 1 No.(d) DC Timer 12/24 V -1No.(e) Control MCB SP 6 Amp.230 V – 9 Nos.(f) Control MCB SP 16 Amp.230 V – 2 Nos.(g) Battery Charger 12/24 DC with SMPS- 1 No. (h) LED Indicating Light for Main & DG—6 Nos(j) LED Indicating Light for Main & Gen. ON – 2 Nos.(k) LED Indicating Light for battery Charger –1 No.(l) Digital Volt meter ( 0-500 V ) 96 mm X 96 mm with Selector switch - 1 Set. (m) Digital Amp meter ( 0-100 A ) 96 mm X 96 mm with Selector switch - 1 Set.(n) CT Coil 125 / 5 A - 3 Nos.(o) DC Volt Meter 15/30 V - 1 No.(p) DC Amp Meter0-15 A - 1 No.(q) Trickle / Boost switch –2 Nos.(r) Auto / Manual Selector Switch ---1 No.(s) Start & Stop Push Button- 2 Nos.(t) 4 point alarm annunciator with inbuilt hooter, test, accept & resetpush button, 12/24 V DC - 1 No.(u) Power Contactor 125 A 3 Pole 415V AC for DG - 1 No.(v) Power Contactor 125 A 3 Pole 415V AC for Main - 1 No.(w) Incoming MCCB 125 A 16 KA 3 Pole Thermal Magnetic release adjustable type for Main & DG Supply - 2 Nos(x) AMF controller 12/24V DC - 01 No. (y) Aux Relay, coilvoltage 12/24 DC ,14 pin - 06 No. (z) Interconnecting Aluminium Link from MCCB to Contactors with Incoming & Outgoing- 1 Set.(aa) PCC foundation as per manufacturers instruction. complete all as specified and directed.

BRR:8665420 Supply Of Zcpa Programme Switch For Isolating Aux Compressorzcpa Programme Switch For Isolating Aux Compressor,Zcpa Programme Switch For Isolating Aux Compressor Of Wam4/Wag-5A/Wap-1/Wap-4 T Ype Locos Specification Clw/Es/S-1/Zb Or Siemens Type K 138 X 22 Old Prog No.4A-0067-9651 Type 3 Lao-250-2Yw00-5W Zcpa. [ Warranty Period: 30 Months After The Date Of Delivery ] ] Amm/Dsd/Ed, Sr Tamil Nadu 33.00 Numbers

BRR:8665342 Supply Of Hermetically Sealed Scroll Compressor Of Emerson Climatehermetically Sealed Scroll Compressor Of Emerson Climate,Hermetically Sealed Scroll Compressor Of Emerson Climate Make And Model No. Zr 61 K Ce Tfd 522 With Operating Voltage 415 V Ac, 3 Phase, 50Hz Suitable For R-407C Refrigerant For Rmpu C Onforming To Rdso Specification No. Rdso/Pe/Spec/Ac/0061-2005(Rev.1). Offers From Oem Or Authori Zed Dealers Or Approved Manufacturers Of Rmpu Are Only Accepted. [ Warranty Period: 30 Months Af Ter The Date Of Delivery ] [Quantity Tolerance (+/-): 5 %Age , Item Category : Normal , Total Po Value Variation Permitt Ed: Max 8 Lacs ] ]

BRR:8665213 Supply Of Complete Air Compressor.,Complete Air Compressor With Air Dryer Buran-10 Motor Part No.Ft0052441-101 Make Faiv Eley (Agtu) For Emu Rakes. [ Warranty Period: 30 Months After The Date Of Delivery ] ] , Faiveley Make Buran-10 Motor Compressor With 4 Pole And Air Dyer (Gw-975) Part No. Ft005 2441-103 For Emu Under-Slung Rake. [ Warranty Period: 30 Months After The Date Of Delivery ] ]

BRR:8665141 Supply Of Set Of Copper Pipe With Nipple For Trc-1000,Mn Compressor Consisting Of [1] Inter Cooler To Lp(Rh) Pt.No.000478400 [2] Inter Cooler To Lp(Lh) Pt.No.000478410 [3] Inter Cooler To Hp Pt.No.000478420 [4] After Cooler To Hp Pt.No. 000478430 [5] After Cooler To Delivery Pt.No. 000478440.Or M/S Saber Dias (1) Inter Cooler To Lp (Rh) Pt. No. 01-122-406 (2) Inter Cooler To Lp(Lh) Pt. No. 01-122-407 (3) Inter Cooler To Hp Pt. No. 01-122-414 (4) After Cooler To Hp Pt. No. 01-122-415 (5) After Cooler To Delivery Pt. No. 01-122-417.Set Of Copper Pipe With Nipple For Trc-1000,Mn Compressor Consisting Of [1] Inter Cooler To Lp(Rh) Pt.No.000478400 [2] Inter Cooler To Lp(Lh) Pt.No.000478410 [3] Inter Cooler To Hp Pt.No.000478420 [4] After Cooler To Hp Pt.No. 000478430 [5] After Cooler To Delivery Pt.No. 000478440.Or M/S Saber Dias (1) Inter Cooler To Lp (Rh) Pt. No. 01-122-406 (2) Inter Cooler To Lp(Lh) Pt. No. 01-122-407 (3) Inter Cooler To Hp Pt. No. 01-122-414 (4) After Cooler To Hp Pt. No. 01-122-415 (5) After Cooler To Delivery Pt. No. 01-122-417.,Set Of Copper Pipe With Nipple For Trc-1000,Mn Compressor Consisting Of [1] I Nter Cooler To Lp(Rh) Pt.No.000478400 [2] Inter Cooler To Lp(Lh) Pt.No.000478410 [3] Inter C Ooler To Hp Pt.No.000478420 [4] After Cooler To Hp Pt.No. 000478430 [5] After Cooler To D Elivery Pt.No. 000478440.Or M/S Saber Dias (1) Inter Cooler To Lp (Rh) Pt. No. 01-122-406 (2) I Nter Cooler To Lp(Lh) Pt. No. 01-122-407 (3) Inter Cooler To Hp Pt. No. 01-122-414 (4) After C Ooler To Hp Pt. No. 01-122-415 (5) After Cooler To Delivery Pt. No. 01-122-417. [ Warranty P Eriod: 30 Months After The Date Of Delivery ] ] => Limited

BRR:8664904 Supply Of Hermetically Sealed Reciprocating Compressor.Hermetically Sealed Reciprocating Compressor.,Hermetically Sealed Reciprocating Compressor 3Ph, 380-400V, High Side Max Pressure(Ps) : 29.4 Bar, Low Side Max Pressure(Ps) : 22.6 Bar, High Side Volume: 0.6L , Low Side Volume: 16.5L, Ip 55, Refri Gerant Charge: 5Kg, Refrigerants: R134a,R404a,R407a,R407c Suitable. Oil Type & Charge :Poe Oil ( 175Pz) & 1.8 L. Suction/Discharge Connections: Rotolock Connections. Starting Characteristics: Locked Rotor Curre Nt Shall Not Exceed 80-85A. Starts Per Hour Limit: Shall Be Designed Minimum 12 Start Per Hour. Motor Prote Ction . Internal Over Load Protection. Application : Spare Compressor For Oil Chiller. Model Similar To Model N O: Mtz80-Hp4cve Of Make Danfoss. Makes: Danfos , Rittal , Bitzer Or Equivalent. Data Sheet Of The Compres Sor Shall Be Submitted Along With The Offer. Manufacturers Test Report Shall Be Submitted Along With Supply . [ Warranty Period: 12 Months After The Date Of Delivery ] ] => Limited

BRR:8664873 Supply Of Valve(Ball Cock 1-1/4 Pt) Compressorvalve(Ball Cock 1-1/4 Pt) Compressor,Valve(Ball Cock 1-1/4 Pt) Compressor Drain To Emd Pt No.10635243 & Blw Pt No : 17451681 To Ftil Pt No 726102000. [ Warranty Period: 30 Months After The Date Of Delivery ] [Quantity Tolerance (+/-): 5 %Age , Item Category : Normal , Total Po Value Variation Permitted: Max 8 Lacs ] ]

BRR:8664664 Supply Of Set Of Maintenance Spare Consistingset Of Maintenance Spare Consisting,Set Of Maintenance Spare Consisting Of 15 Items For Compressor Suitable For Model No. Trc 2507, Make Elgi, Fitted In 1400 Hhp Demu Dpc, List Of Spares Parts In Each Set Is Attached Herewith In A Nnex. 1. Annexure-1 Sr.No Elgi Description Elgi Part Number Qty. 1 Set Of Spares For Trc2507 Compress Or Consisting Of 15 Items As Below :- 3 Sets 1A Washer Cu Cyl Head 000439270 12Nos. 1B Washer Cu I/L & Dv 000439260 12 Nos. 1C Safety Valve 3/4 Bsp B841701 1 No. 1D Elbow Gi 1 Inch Bsp 00097205 5 1 No. 1E Pipe 1 Inch Bsp Breather 000438460 1 No. 1F Socket Dia 40 X 1 Inch Bsp X 40 020484920 1No. 1G Breather Valve Assy A020030 1 No. 1H Dipstick With Chain Trc 2507 070400730 1 No. 1I Washer Trc 2507 070400150 1 No. 1J Nut,Castle,M36x1.5 070400090 1 No. 1K Valve Assy Drain 1/ 4 Inch Bsp Mn A020045 1 No. 1L Unloder Pipe Assy No 1 070407340 2 No. 1M Unloder Pipe Assy No 2 070407350 2 No. 1N Elbow,Tms, 1/4 X 1/4 22047681B 1 No. 1O Tee, Branch,Tm 1/4 X 1/4 22047682 A 1 No. [ Warranty Period: 30 Months After The Date Of Delivery ] [Quantity Tolerance (+/-): 5 %Age , Item Category : Normal , Total Po Value Variation Permitted: Max 8 Lacs ] ]

BRR:8664557 Supply Of Set Of Maintenance Spare Consistingset Of Maintenance Spare Consisting,Set Of Maintenance Spare Consisting Of 15 Items For Compressor Suitable For Model No. Trc 2507, Make Elgi, Fitted In 1400 Hhp Demu Dpc, List Of Spares Parts In Each Set Is Attached Herewith In A Nnex. 1. Annexure-1 Sr.No Elgi Description Elgi Part Number Qty. 1 Set Of Spares For Trc2507 Compress Or Consisting Of 15 Items As Below :- 3 Sets 1A Washer Cu Cyl Head 000439270 12Nos. 1B Washer Cu I/L & Dv 000439260 12 Nos. 1C Safety Valve 3/4 Bsp B841701 1 No. 1D Elbow Gi 1 Inch Bsp 00097205 5 1 No. 1E Pipe 1 Inch Bsp Breather 000438460 1 No. 1F Socket Dia 40 X 1 Inch Bsp X 40 020484920 1No. 1G Breather Valve Assy A020030 1 No. 1H Dipstick With Chain Trc 2507 070400730 1 No. 1I Washer Trc 2507 070400150 1 No. 1J Nut,Castle,M36x1.5 070400090 1 No. 1K Valve Assy Drain 1/ 4 Inch Bsp Mn A020045 1 No. 1L Unloder Pipe Assy No 1 070407340 2 No. 1M Unloder Pipe Assy No 2 070407350 2 No. 1N Elbow,Tms, 1/4 X 1/4 22047681B 1 No. 1O Tee, Branch,Tm 1/4 X 1/4 22047682 A 1 No. [ Warranty Period: 30 Months After The Date Of Delivery ] [Quantity Tolerance (+/-): 5 %Age , Item Category : Normal , Total Po Value Variation Permitted: Max 8 Lacs ] ]

BRR:8664384 Bids Are Invited For Piston W/Snap Ring Dlw Pn 10142733 , Piston Ring Set-Is:6621, Is:8422 Total Quantity : 30

BRR:8664276 Bids Are invited for Jaw Plate Swing Jaw 24150101 , Jaw Plate Stationary Jaw 24150102 , Swing Jaw Keeper Plate 24150203 , Swing Jaw Keeper Plate Holding Bolt 24150204 , Stationary Jaw Keeper Plate 24150205 , Stationary Jaw Keeper Plate Holding Bolt 24150206 , Pull Back Rod 24150501 , Pull Back Rod Spring 24150502 , Rubber Diaphragm 24150701 , Lower Wear Plate 24150801 , Lower Wear Plate Holding Bolt And Nut 24150803 , Guard Plate 24150900 , Pitman 24151101 , Front Toggle 24151201 , Rear Toggle 24151202 , Toggle Pin 24151301 , Toggle Seat 24151302 , Toggle Spring 24151401 , Stationary Jaw Holding Stud For Upper Block 24150202 , Stationary Jaw Holding Stud For Lower Block 24150208 , Side Plate Holding Bolt 24150210 , Safety Arm Assembly 24151501 , Flywheel Bush 24151601 , Safety Shoe 24151502 , Safety Arm Holding Clamp 24151503 , Safety Arm Key 24151504 , Safety Flat 24151505 , Rubber Diphragm Small Pin Bolt 24150702 , Hing Pin 24151601 , Eyelet Pin 24150209 , Oil Pump 24151800 , Oil Seat 24151004 Total Quantity : 150

BRR:8663519 Bids Are Invited For Puf Diaphragm(8.8Mm Thickness) Raw Material For Astra Mk-I Project Total Quantity : 6

BRR:8663429 Bids Are Invited For Repair And Overhauling Service - Lashing Of Inner And Outer Rubber Diaphragms Of All 04 Gts; As Per Scope Of Work; Yes; Buyer Premises

BRR:8663427 Bids Are Invited For Repair And Overhauling Service - Repairs And Serviceability Checks Of Nitrogen Compressor; As Per Scope Of Work; Yes; Buyer Premises

BRR:8663215 Bids Are invited for Spring For Prv-400Mm Dis. Part No. -03 Of S100 , Nut For Stem For 400Mm Prv Part No 4 Of S100 , Stud Length -130Mm For Prv-400Mm Part No- 6 Of S100 , Nut Forv Prv 400Mm Part No 7 Of S100 , Main Diaphragm Prv , Washer-O-Ring For Prv-400Mm Dis. Part No. -14 Of S100 , Stem For Prv-400Mm Dis. Part No. -15 Of S100 , Spacer For Prv-400Mm Dis. Part No. -16 Of S100 , Reducing Control Valve For 400Mm Prv End Connection -Screw Type Size-1 Inch Total Quantity : 186

BRR:8663124 Bids Are Invited For Diaphragm Vacuum Pump, Make: Knf Neuberger, Model: N86 Ate (Pm23712-86) , Spare Diaphragm For Vacuum Pump, Make: Knf Neuberger, Model: N86 Ate (Pm23712- 86) Total Quantity : 20

BRR:8663116 Bids Are Invited For 1 PACKING REPAIR KIT FOR LCV-703 - Detailed Description as per ATC Document 2 DIAPHRAGM FOR LCV-703 - Detailed Description as per ATC Document 3 CAGE,LINEAR FOR LCV-703 - Detailed Description as per ATC Document 4 GASKET SET FOR LCV-703 - Detailed Description as per ATC Document 5 PLUG/STEM ASSY FOR LCV-703 - Detailed Description as per ATC Document 6 RING,BACK-UP FOR LCV-703 - Detailed Description as per ATC Document 7 RING,RETAINING,EXT FOR LCV-703 - Detailed Description as per ATC Document 8 SEAL RING/SPR,RADIAL FOR LCV-703 - Detailed Description as per ATC Document 9 SEAT RING FOR LCV-703 - Detailed Description as per ATC Document 10 PACKING REPAIR KIT FOR LCV-604A - Detailed Description as per ATC Document 11 BUSHING,SEAL FOR LCV-604A - Detailed Description as per ATC Document 12 DIAPHRAGM FOR LCV-604A - Detailed Description as per ATC Document 13 ACTUATOR REPAIR KIT (SOFT) FOR LCV-604A - Detailed Description as per ATC Document 14 CAGE ADAPTOR FOR LCV-604A - Detailed Description as per ATC Document 15 CAGE,EQ%,COATED FOR LCV-604A - Detailed Description as per ATC Document 16 GASKET SET FOR LCV-604A - Detailed Description as per ATC Document 17 PLUG/STEM,BAL FOR LCV-604A - Detailed Description as per ATC Document 18 RING,BACK-UP FOR LCV-604A - Detailed Description as per ATC Document 19 RING,RETAINING,EXT FOR LCV-604A - Detailed Description as per ATC Document 20 SEAL RING/SPR,RADIAL FOR LCV-604A - Detailed Description as per ATC Document 21 SEAT RING FOR LCV-604A - Detailed Description as per ATC Document 22 SEAT RING ADAPTOR FOR LCV-604A - Detailed Description as per ATC Document 23 PACKING REPAIR KIT FOR LCV-604B - Detailed Description as per ATC Document 24 BUSHING,SEAL FOR LCV-604B - Detailed Description as per ATC Document 25 DIAPHRAGM FOR LCV-604B - Detailed Description as per ATC Document 26 ACTUATOR REPAIR KIT (SOFT) FOR LCV-604B - Detailed Description as per ATC Document 27 CAGE ADAPTOR FOR LCV-604B - Detailed Description as per ATC Document 28 CAGE,EQ%,COATED FOR LCV-604B - Detailed Description as per ATC Document 29 GASKET SET FOR LCV-604B - Detailed Description as per ATC Document 30 PLUG/STEM,BAL FOR LCV-604B - Detailed Description as per ATC Document 31 RING,BACK-UP FOR LCV-604B - Detailed Description as per ATC Document 32 RING,RETAINING,EXT FOR LCV-604B - Detailed Description as per ATC Document 33 SEAL RING/SPR,RADIAL FOR LCV-604B - Detailed Description as per ATC Document 34 SEAT RING FOR LCV-604B - Detailed Description as per ATC Document 35 SEAT RING ADAPTOR FOR LCV-604B - Detailed Description as per ATC Document 36 DIAPHRAGM FOR PCV-705A/B - Detailed Description as per ATC Document 37 PACKING REPAIR KIT FOR PCV-705A/B - Detailed Description as per ATC Document 38 CAGE, WHISPER III, LEVEL A3, PCV-705A/B - Detailed Description as per ATC Document 39 C-SEAL/BORE SEAL FOR PCV-705A/B - Detailed Description as per ATC Document 40 GASKET FOR PCV-705A/B - Detailed Description as per ATC Document 41 GASKET,SPIRAL WOUND FOR PCV-705A/B - Detailed Description as per ATC Document 42 PLUG/RET/STEM ASSY FOR PCV-705A/B - Detailed Description as per ATC Document 43 RING,PISTON FOR PCV-705A/B - Detailed Description as per ATC Document 44 SEAT RING FOR PCV-705A/B - Detailed Description as per ATC Document 45 BEARING,THRUST -1 FOR PCV-705A/B - Detailed Description as per ATC Document 46 BEARING,THRUST -2 FOR PCV-705A/B - Detailed Description as per ATC Document 47 PACKING REPAIR KIT FOR LCV-076A - Detailed Description as per ATC Document 48 CAGE,LINEAR FOR 05LV-076A - Detailed Description as per ATC Document 49 GASKET SET,HP FOR 05LV-076A - Detailed Description as per ATC Document 50 PLUG/STEM,M-FORM FOR 05LV-076A - Detailed Description as per ATC Document 51 SEAT RING FOR 05LV-076A - Detailed Description as per ATC Document 52 BEARING,THRUST -1 FOR 05LV-076A - Detailed Description as per ATC Document 53 BEARING,THRUST -2 FOR 05LV-076A - Detailed Description as per ATC Document 54 BUSHING,SEAL FOR 05LV-076A - Detailed Description as per ATC Document 55 DIAPHRAGM FOR 05LV-076A - Detailed Description as per ATC Document 56 KEY FOR 05LV-076A - Detailed Description as per ATC Document 57 ACTUATOR REPAIR KIT (SOFT) 05LV-076A - Detailed Description as per ATC Document 58 PACKING REPAIR KIT FOR 02PV-189B - Detailed Description as per ATC Document 59 BUSHING,SEAL FOR 02PV-189B - Detailed Description as per ATC Document 60 DIAPHRAGM FOR 02PV-189B - Detailed Description as per ATC Document 61 CAGE/BAFFLE,WHIS III FOR 02PV-189B - Detailed Description as per ATC Document 62 PLUG/STEM,VALVE FOR 02PV-189B - Detailed Description as per ATC Document 63 SEAT RING FOR 02PV-189B - Detailed Description as per ATC Document 64 PACKING KIT,REPAIR FOR 02PV-360A &B - Detailed Description as per ATC Document 65 BEARING,COMBINATION FOR 02PV-360A &B - Detailed Description as per ATC Document 66 BUSHING,SEAL FOR 02PV-360A &B - Detailed Description as per ATC Document 67 KEY FOR 02PV-360A &B - Detailed Description as per ATC Document 68 KIT,REPAIR ACTUATOR FOR 02PV-360A &B - Detailed Description as per ATC Document 69 CAGE,LEVEL C3 FOR 02PV-360A &B - Detailed Description as per ATC Document 70 GASKET SET FOR 02PV-360A &B - Detailed Description as per ATC Document 71 PLUG/STEM,ANTI-EXTR FOR 02PV-360A &B - Detailed Description as per ATC Document 72 SEAT RING FOR 02PV-360A &B - Detailed Description as per ATC Document 73 GASKET SET FOR LV-076B - Detailed Description as per ATC Document 74 BEARING THRUST-2 FOR LV-076B - Detailed Description as per ATC Document 75 BUSHING, SEAL FOR LV-076B - Detailed Description as per ATC Document 76 DIAPHRAGM FOR LV-076B - Detailed Description as per ATC Document 77 DVC 2000 FISHER SMART POSITIONER - Detailed Description as per ATC Document Total Quantity : 94

BRR:8662842 Bids Are Invited For 1000187246 Actuator Stem With Nut Retainer, W1jn , 1000187247 Diaphragm Plate, W1jn, Severn Glocon , 1000187248 Actuator Bolts W/ Nut, W1jn, Severn , 1000187249 Valve Body, Ss, 6 150# , Globe, Series 1200 Total Quantity : 5

BRR:8662686 Tender for Special Repairs To 15 Class Room Roof Expansion Joints And Water Supply Arrangements To Chemistry Lab & 2 Class Room In Arignar Anna Government Higher Secondary School, Urur, Adyar, Besant Nagar, Chennai-90.

BRR:8662619 Bids Are invited for 699966000085 Elgicompr.-Elgi Air Lube Ut Syn Plus , 699966000086 Consumables Kit Elgi Compressor-8000 , 699966000087 Valve Kit For Elgi Compressor-8000 Hr , 699966000088 Drive Couping Element - Elgi Compres , 699966000096 Tubes Pu Fitting Kit-Elgi Compressor , 699966000097 O-Ring Kit Eg 132P -160P-Elgi Compres , 699966000098 Thermal Valve Kit Wc-Elgi Compressor , 699966000099 Air Oil Separator-Elgi Compressor , 699966000100 Grease-Em Unirex N3-Elgi Compressor Total Quantity : 30

BRR:8662352 Tender For Pichukuli To Kotasingha Road; 1 Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of grith upto 300mm removal of stumps of such trees cut earlier and disposal of unserviceable materials by manual means andstacking of serviceable materials to be used or auctioned upto a lead of 1000m incuding removal and disposal of top organic soil not exceeding 150mm in thickness as per direction of Engineer-in-charge. 2 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density as per clause 404 of MORTH specificationfor Road & Bridge works (4th Revision). WBM Grade - III Using stone screened dust 3 Providing 37.5mm thick BUSG in one layers applying tack coat using 3.0 kg of bitumen /10 sqm, using 0.45 cum of25mm to 40mm size H.G. metal& 0.12 cum of 12mm size h.g. chips for 10 sqm . etc. complete as per direction of Engineer-in-charge. 4 Providing and applying Primer coat withpenetration grade of bitumen emulsion using bitumen pressure distributorincluding all cost, carriage, royality, taxes of materials etc complete as per direction of Engineer-in-charge. 5 Providing & applying tack coat over the bituminous surface with bitumen boiler fitted with spray set using 0.20Kg / Sqm. area including clearing the surface etc. complete for finished item of work induding cost, conveyance, royalty, taxes, labour, T&P, all other matermls required for the work etc. complete as per direction of the Engineer-incharge. 6 Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement,thickness as per design, over a prepared sub-base, with 43 grade cement of any other type as per Clause 1501.2.2 M-30 (Grade), coarse and fine aggregate not exceeding 25mm mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design,laid in approved fixed side formwork (steel channel, laying and fixing of 125micron thick polythene film,wedges,steel plates including levelling the form work as per drawing), spreading the concrete with shovel,rakes,compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contaction and expansion, construction joints, applying debonding strips, primer, sealant,dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved,curing of concrete slabs for 14-days, curing compound (where Spefied) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501etc. complete as per direction of the Engineer-incharge 7 Providing and laying semi dense bituminous concrete with batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder of 60/70 penetration grade of bitumen, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheelede, vibratory and tandem rollers to achieve the desired compaction as per Clause 508 of MoSRT&H Specifications for Road & Bridge works (4th Revision) etc. complete as per direction of the Engineer-incharge 8 Providing & laying good laterite moorum for filling road flanks including cost and conveyance of all materials to site, and all labour charges complete as per direction of E.I.C.

BRR:8662256 Bids Are Invited For Hiring Of Third-Party Inspection Agency - Different Kind Of Slings, Chains, D Shackles, Lifting Tackles, Compressor Reservoirs, Etc; To Be Entered By Buyer As Per Domain; The Chief Inspector Of Factories, Government Of Jharkhand, In Accordance With R..

BRR:8662202 Bids Are invited for Connecting Rod Piston And Ring Eng Assy - Re , Carburetor Bs29 - Re , Throttle Cable Assy - Re , Coil Ignition - Re , Gasket Set Complete Engine - Re , Chain And Sprocket Kit - Re , Rod Connecting - Hh , Unit Assy Fuel - Hh , Head Comp Cylinder - Hh , Switch Assy Comb And Lock - Hh , Outer Complete Clutch - Hh Total Quantity : 11

BRR:8662090 Bids Are invited for Air Compressor Supply , Air Compressor Installation , Pneumatic Testing Machine Air Line Fabrication And Erection , Pneumatic Testing Machine Water Line Fabrication And Erection , New Pneumatic Testing Machine Installation Total Quantity : 5

BRR:8662057 Bids Are Invited For Trolley With Frame And Caster Wheels And Compressor , Aluminium Extrusion Profile Plate , Quick Push Button Connection , High Pressure Tubing , Frl Unit , 3 2 Dcv Push Button Operated , 5 2 Dcv Level Operated , 5 3 Dcv Level Operated , 5 3 Dcv Level Operated With Spring Loaded , 5 2 Dcv Pilot Operated , Time Delay Valve , One Way Variable Flow Control Valve , Pneumatic Motor , Connection Plates , Manifold , Pneumatic Fittings , Compressor , Assembly Of Above Items For Development Of Pneumatic Trainer , Trolley With Frame And Caster Wheels , Hydraulic Tank With Filter And Breather , 3 Phase Foot Flange Mounted Electric Motor With Starter Godrej Company Motor , Bell Housing , Flexible Coupling , Pressure Gauge , Gear Pump , Relief Valve , Valve Mounting Plates , Throttle Valve Pressure Compensated Fcv , Check Valve , Single Acting Cylinder , Double Acting Cylinder , 4 2 Dcv Lever Operated , 4 3 Dcv Lever Operated , 4 3 Lever Operated Spring Loaded , 5 3 Lever Operated , 5 3 Lever Operated Spring Loaded , Flow Meter , Hydraulic High Pressure Hose Pipe Bundle , Hydraulic Pipe Fittings Qrc , Hex Nipple , Manifold For All Valve , 1 4 Connection And Elbow , Assembly Of Above Items For Development Of Hydraulic Trainer Total Quantity : 464

BRR:8661630 Bids Are Invited For Mcb 25 Amp Spn , 1 Core 1 Point 5 Sqmm Frsh Copper Cable , 1 Core 2 Point 5 Sqmm Frsh Copper Cable , 6 Amp Piano Type Switch , 16 Amp Piano Type Switch , 6 Amp 3 Pin Socket , 16 Amp 3 Pin Socket , 6 Amp Ssc , 16 Amp Ssc , 6 Amp Ssc With Pvc Box , 16 Amp Ssc With Pvc Box , Fan Regulatore Piano Type , Led Bulb 9 Watt , Capacitore 2 Point 5 , Capacitore 4 , Casing Caping 20 Mm , Casing Caping 25 Mm , Hylam Sheet 3Mm Thick , Steel Nail 1. Point Inch , Compressor For Water Cooler 80Ltr Per Hr Cooling Capacity Comma 150 Ltr Storage Capacity , Compressor For Water Cooler 80Ltr Per Hr Cooling Capacity Comma120 Ltr Storage Capacity , Compressor For Water Cooler 40Ltr Per Hr Cooling Capacity Comma 80 Ltr Storage Capacity , Compressor For 1 Point 5 Ton Ac , Compressor For Deep Freez 300L , Capacitore 45 Mfd , Capacitore 50 Mfd , Starting Capacitore 100 Mfd , Thermostat Switch For Gser 25 L , Heating Elements 1 Point 5 Kw For Geyser 25 Ltr Cap , Heating Elements 2 Kw For Geyser 25 Ltr Cap , Overload Protector For Ac 1 Point 5 Oblique 2 , Starting Relly For Ac 1 Point 5 Oblique 2 , Fan Moter For Ac Indoor Unit 1 Point 5 Ton Capacity , Fan Moter For Ac Outdoor Unit 1 Point 5 Ton Capacity , Pcb 1 Point 5 Oblique 2 Ton Ac , Pvc Water Outet Pipe For Water Cooler , Push Cock Stainless Steel , Thermostat For Water Cooler , Pvc Flexible Pipe 15Mm , Desert Cooler Diveter , 6 Amp Plug Top 3 Pin , 16 Amp Plug Top 3 Pin Total Quantity : 1523

BRR:8661387 Bids Are invited for Carburetor - Nnk-2212 , Air Filter - Nnk-2536 , Fuel Pipe - Ixc-Rh-995-1010 , Rope Assy - Nnk-2530 , Spark Plug - 2805-005533 , Piston Oversize - 2815-003691-160498 , Piston Std Bore Liner - Ixc-Kr-34-025-15-0 , Piston Ring Set - Ixc-Kr-34-025-0910 Total Quantity : 29

BRR:8661340 Bids Are invited for Anabond Tube - H1 , Feviquick 1 Gm - H1 , Taflon Tape - Y3 , Piston Ring - X3 , Electrodes Welding Steel Armour 3 15 - G2 , Fan Belt Ax56 1452 - X2 Total Quantity : 13

BRR:8661293 Bids Are invited for Fuel Pump For 2 5 Kva Genr Set , Oil Filter For 2 5 Kva Genr Set , Battery Terminal For 2 5 Kva Genr Set , Mcb 10 Amp For 3 5 Kva Genr Set , Mcb 16 Amp For 3 5 Kva Genr Set , Mcb 32 Amp For 3 5 Kva Genr Set , Fuel Feed Pump For 3 5 Kva Genr Set , Engine Mounting Pad For 3 5 Kva Genr Set , Avr For 3 5 Kva Genr Set , Piston With Ring Set For 3 5 Kva Genr Set , Big And Bearing For 3 5 Kva Genr Set , Tapped Cover Seal For Wlding Genr Set , Self Startor For Welding Genr Set 7 5 Kva Total Quantity : 45

BRR:8661131 Bids Are invited for Front Wind Screen Glass - A/Bus , Tensioner Belt Assy - A/Bus , Air Compressor Repair Kit - A/Bus , Repair Kit - A/Bus , Bonat Shocker - Safari Total Quantity : 6

BRR:8661123 Bids Are invited for Cylinder Liner - Acsfp , Piston - Acsfp , Piston Ring - Acsfp , Oil Filter - Acsfp , Bush - Acsfp Total Quantity : 11

BRR:8661111 Bids Are invited for Compressor Of Medical Eqpt , High Pressure Pump Of Medical Eqpt , Bullnose Of Medical Eqpt , Auto Sensor Of Medical Eqpt , High Pressure Relay Of Medical Eqpt Total Quantity : 8

BRR:8661066 Bids Are invited for Invitation Cards Printed - Invitation Cards Printed With Inner Cards And Pocket Inside , Flag Rope - Flag Rope Full Length Single Piece No Joints , Dustbin Steel With Lid - Dustbin Steel With Lid Stainless Steel Body , Wooden Basket 11X8 Inch , Remote Call Bell - Remote Call Bell With Battery And Long Range , Ac Repairing - Ac Repairing A. Pcb Card Reparing Or Replacement B. Gas Refilling C. Compressor Terminal Reparing Or Replacement D. 50 Mfd Running Capacitor E. Fan Motor Repair Or Replacement F. Drain Tray Replacement Total Quantity : 216

BRR:8661057 Tender For Special Repair Of Jaitpur Bokta To Amtaura Banuda Link Road Length 0.25 Km. - WBM-IIIProviding, laying, spreading and compacting stone aggregates of 22.4-53mm size to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with threewheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, screening Type-C to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405(3). Sl No. 4.7 (Including Labour cess and royality )(GST will be paid extra as per applicable) 2 Cement Concrete Pavement Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints,applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, using curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 (Including Labour Cess & GST will paid extra as applicable) 3 Construction of Subgrade and Earthen Shoulders Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1.(Including Labour cess and royality )(GST will be paid extra as per applicable)

BRR:8661035 Tender For Special Repair Of Jungle Dumari No 2 Link Road Length 0.310 Km Lot 21 Of 25 - WBM-III Providing, laying, spreading and compacting stone aggregates of 22.4-53mm size to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with threewheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, screening Type-C to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405(3). Sl No. 4.7 (Including Labour cess and royality )(GST will be paid extra as per applicable) 2 Cement Concrete Pavement Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints,applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, using curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 (Including Labour Cess & GST will paid extra as applicable) 3 Construction of Subgrade and Earthen Shoulders Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1.(Including Labour cess and royality )(GST will be paid extra as per applicable)

BRR:8661001 Bids Are Invited For Isolator switch (Q3) , Piano Type Modular Domestic Fan Regulator as per IS 11037 (Q3) , Piano Type Non Modular Electrical Switch Socket Combination as per IS 3854 and IS 1293 (Q3) , LED emergency lamp 12 watt , LED emergency lamp 9 watt , Casing and Capping PVC 25x20 mm , Heating element 1500 Watt , Heating element 2000 Watt , Decorative wall light fitting with acrylic cover in polycarbonate base suitable for 9 Watt LED lamp , LED Surface mounted square type surface LED 18 Watt fitting with in built driver suitable for ceiling roof 120 lmn W , AC Box modular type PVC Body with MCB SP 25 A , AC Box with MCB 16 Amp SP , MCB DB 4 Way TPN double door , Cable flat sumerceble sheathed 3 core 6 Sqmm , Beeding Teak wood 4 mm x 32 mm , Beeding Teak wood 4 mm x 20mm , Beeding Teak wood size 12 x 6 mm x 8 feet long , Telescopic channel 12 inch oblique 10 inch , PU Foam 40 density cushion with chain cover , Prelam EDHMR or HDMR board 8 feet x4 feet 18 mm thick , Plywood Comercial 8 feet x 4 feet x 6 mm BWR , TW Plywood Commercial 8 feet x 4 feet x 4 mm , White synthetic adhessive Fevicol SH , French Polish , Auto lacquer polish in one Ltr pack , Fancy Brass Coated Knob 32 mm , Knob Decorative Type 32 mm , Touchwood Polish , NC Thinner for polish , Thinner Normal , Anti Termite Oil , Screw Wood Steel 15 mm , Nails wire steel 50 mm , Nails wire steel 75 mm , Nails wire steel 100 mm , Piano Type Hinges SS 20x20 mm x 6 feet long , Ply wood Commercial 8 feet x 4 feet x12 mm , Ply wood 8 feet x 4 feet x 6 mm one side teak face , Ply wood 8 feet x 4 feet x12 mm one side teak face , AC Copper pipe 5 oblique 8 , Copper pipe 1 oblique 4 inch , Copper Tube 1 oblique 2 inch , Condenser coil for 1.5 TR for window AC outdoor , Condenser coil for 1.5 TR for split AC outdoor unit , Compressor 80 Ltr 1 oblique 3 TR , Compressor 150 Ltrs 1 TR , Compressor 2 TR AC Rotary type , Compressor 1.5 Ltr Rotary Type

BRR:8660990 Tender For Special Repair Of Pipari To Matiyarwa Link Road Length 0.20 Km - WBM-IIIProviding, laying, spreading and compacting stone aggregates of 22.4-53mm size to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with threewheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, screening Type-C to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405(3). Sl No. 4.7 (Including Labour cess and royality )(GST will be paid extra as per applicable) 2 Cement Concrete Pavement Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints,applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, using curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 (Including Labour Cess & GST will paid extra as applicable) 3 Construction of Subgrade and Earthen Shoulders Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1.(Including Labour cess and royality )(GST will be paid extra as per applicable)

BRR:8660983 Bids Are invited for Fan Belt , Bulb 55W , Compressor Assy , Bush Carrier Assy , Oil Sel Total Quantity : 5

BRR:8660943 Bids Are Invited For INDUSTRIAL HEATING ELIMENT 9KW 3 PHASE 2 POINT 6 MTR LONG , LIFT CABIN FAN 300MM , RCCB 40AMP 4 POLE 300M , SPLIT AC OUTDOOR KIT 2 TON WITHOUT COMPRESSOR , LED DOWN LIGHT 2 BY 2 48WATT , 3 POLE POWER CONTACTOR MNX 80 2 NO PLUS 2 NC 415 VOLTS , REFRIGRENT GAS R 134A , POWER CONTACTOR MCX 255 AMP , WINDOW AC KIT WITHOUT COMPRESSOR 2 TON , 3 POLE POWER CONTACTOR ML 2 WITH AUX CONTACT 2 NO PLUS 2 NC , STREET LIGHT FITTING 60 WATT , 100 AMP CURRENT COLLECTOR WITH 1 MTR CABLE , SCALE OFF CHEMICAL , SPLIT AC INDOOR KIT 2 TON , REFRIGRENT GAS R 22 , SPLIT AC OUTDOOR UNIT WITHOUT COMPRESSOR 1POINT 5 TON , 3 POLE POWER CONTACTOR MNX 32 2 NO PLUS 2 NC 415 VOLTS , STREET LIGHT FITTING 30 WATT , SPLIT AC INDOOR UNIT 1 POINT 5 TON , WINDOW AC KIT WITHOUT COMPRESSOR 1 POINT 5 TON , UNDERDECK INSULATION 25MM NITRILE , 3 POLE POWER CONTACTOR MNX 25 AMP 2NO PLUS 2NC 415 VOLT , MCCB 4 POLE 160A 35KA , DUCT INSULATION SIZE 25MM , LED BULB 10WATT , MCCB TPN 100AMP 16KA , AC OUTDOOR STAND , MCCB TPN 160AMP 16KA , DUCT INSULATION SIZE 19MM , STREET LIGHT FITTING 45 WATT , SEALED COMPRESSOR ROTORY TYPE CAP 2 TR , LED DOWN LIGHT 3 WATT , SEALED COMPRESSOR ROTORY TYPE CAP 1 POINT 5 TR , SEALED COMPRESSOR RECIPROCATING TYPE CAP 1 POINT 5 TR , WOOD WOODEN PAD , SEALED COMPRESSOR RECIPROCATING TYPE CAP 2 TR , 3 POLE POWER CONTACTOR ML 1 POINT 5 WITH 2 NO PLUS 2 NC INPUT OUTPUT COILVOLTAGE 415 OBLIQUE 110V , DESERT COOLER PUMP , MCCB 3 POLE 125 AMP 25KA , 3 POLE POWER CONTACTOR MNX 18 AMP 2NO PLUS 2NC 415 VOLT , ROTARY TYPE GEARED LIMIT SWITCH RATIO 48 BY 1 WITH 2 CONTACT TYPE GRLS 48 BY 2 SE IP 54 , FRONT GRILL FOR WINDOW TYPE AC 2 TR , COPPER PIPE SIZE HALF INCH DIA , LED LIGHT FITTING BULK HEAD 9 WATT , MCCB 4 POLE 200AMP 415V 35 KA , XLPE Cable for Working Voltages up to and Including 1.1 KV as per IS 7098 (Part 1) , PVC Copper Cable Single Core and Multi Core Circular Sheathed Cable with Rigid Conductor (V2) as per IS 694 Total Quantity :

BRR:8660913 Bids Are invited for Bearing Main , Cyl Head Gasket , Eng Gasket Upper , Engine Gasket Lower , Piston Ring Set Total Quantity : 6

BRR:8660912 Bids Are invited for Piston Assy , Piston Ring Set , Fork , Injector Assy , Crank Shaft Comp , Cam Shaft Comp , Valve Inlet , Valve Exhaust , Oil Pump Total Quantity : 9

BRR:8660885 Bids Are invited for Valve Set Exhaust , Shim For Adjusting , Lamp Filament , Stud Rh , Brake Valve Cap , Pipe Outlet , Rocker Valve , Exhaust Manifold , Diaphragm , Washer Spring , Leather Cloth White Total Quantity : 59

BRR:8660813 Bids Are invited for Automatic Voltage Regulator , Air Filter , Alternator , Piston Ring Set , Injector Nozzle , Gasket , Piston Assy , Liner Sleeve , Rocker Assy Total Quantity : 23

BRR:8660812 Bids Are invited for Sheet Cellular 25Mm Thick , Rubber Mattaing , Paint White , Matal Diode , Automatic Voltage Regulator , Fuel Pump Mounted Stop Solenoid , Injector Nozzle , Alternator , Piston Ring Set , Liner Total Quantity : 44

BRR:8660807 Tender For Cc Work On The Link Road From Sanyogita Marg To Kiratpur - WBM Grading 3 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.(A) By Manual Means 2 Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixture as approved, curing of concrete slabs for 14-days, using curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 3 Excavation in Cutting in Soil by manual means with lead upto 50 m Excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per Technical Specification Clause 302.3 4 Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 I.( P.C.C grade M 10 (i) Nominal mix 1:3:6) 5 Brick masonry work in cement mortar in foundation complete excluding pointing and plastering as per drawing and technical specifications Clauses 600, 1202 & 1203 II. (Brick masonry in 1:4 cement mortar) 6 Plastering with cement mortar (1:4), 15 mm thick on brickwork in substructure as per technical specification Clauses 613.4 & 1204 7 Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 IV. R.C.C grade M 20

BRR:8660794 Tender For Cc Work On The Link Road From Sanyogita Road To Chachasanda - WBM Grading 3 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. (A) By Manual Means 2 Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixture as approved, curing of concrete slabs for 14-days, using curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 3 Excavation in Cutting in Soil by manual means with lead upto 50 m Excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per Technical Specification Clause 302.3 4 Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 I.( P.C.C grade M 10 (i) Nominal mix 1:3:6) 5 Brick masonry work in cement mortar in foundation complete excluding pointing and plastering as per drawing and technical specifications Clauses 600, 1202 & 1203 II. (Brick masonry in 1:4 cement mortar) 6 Plastering with cement mortar (1:4), 15 mm thick on brickwork in substructure as per technical specification Clauses 613.4 & 1204 7 Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 IV. R.C.C grade M 20

BRR:8660793 Tender For Cc Work On The Road From Siyarmau Anugi Nadsia Road To Nadsia Village - WBM Grading 3 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. (A) By Manual Means 2 Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixture as approved, curing of concrete slabs for 14-days, using curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 3 Excavation in Cutting in Soil by manual means with lead upto 50 m Excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per Technical Specification Clause 302.3 4 Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 I.( P.C.C grade M 10 (i) Nominal mix 1:3:6) 5 Brick masonry work in cement mortar in foundation complete excluding pointing and plastering as per drawing and technical specifications Clauses 600, 1202 & 1203 II. (Brick masonry in 1:4 cement mortar) 6 Plastering with cement mortar (1:4), 15 mm thick on brickwork in substructure as per technical specification Clauses 613.4 & 1204 7 Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 IV. R.C.C grade M 20

BRR:8660791 Tender For Cc Work On Hadhapurwa Road Via Chachasanda Bhajjapurwa Link Road - WBM Grading 3 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. (A) By Manual Means 2 Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixture as approved, curing of concrete slabs for 14-days, using curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 3 Excavation in Cutting in Soil by manual means with lead upto 50 m Excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per Technical Specification Clause 302.3 4 Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 I.( P.C.C grade M 10 (i) Nominal mix 1:3:6) 5 Brick masonry work in cement mortar in foundation complete excluding pointing and plastering as per drawing and technical specifications Clauses 600, 1202 & 1203 II. (Brick masonry in 1:4 cement mortar) 6 Plastering with cement mortar (1:4), 15 mm thick on brickwork in substructure as per technical specification Clauses 613.4 & 1204 7 Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 IV. R.C.C grade M 20

BRR:8660762 Tender For Special Repair Of Visunpur Narayanbhari To Dewa Bhayara Odr In Block Dewa Distt.- Barabanki. - Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam (Garde-III) specification including spreading in uniform thickness, hand packing, rolling with Three wheel Static roller 8-10 tonnes in stages to proper grade and camber, applying and brooming crushable screening to fill up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per Technical specificationMORT&H Clause 404(including all taxes but excluding cost of G.S.T. 2 Construction ofun-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design,laid in approved fixed side formwork, spreading the concrete with shovels, rakes, compacted using needle and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying primer, sealant, as per design, admixtures as approved, curing of concrete slabs for 14-days, and water finishing to lines and grade as per drawingand Technical Specification MORT&H Clause 602 (including all taxes but excluding cost of G.S.T.) 3 Construction of Subgrade and Earthen Shoulders Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification MORT&H Clause 305.(including all taxes but excluding cost of G.S.T.)

BRR:8660200 Tender For Special Repair / Replacement Of Ber Cooling Appliances At Afs Hakimpet Under Ge (Af) Hakimpet.; 1 Supply, installation, fixing, testing and commissioning AC Split type, Intellisense inverter technology compressor, three star energy saving unit, single phase, cooling capacity 1.0 TR, including Remote Control unit,Plasma filter for better indoor air quality with minimum 3 star rating electric driven and split AC copper condensing unit (outdoor unit) fixed onsuitable size perforated angle iron frame for mounting condensing units as required and evaporator grouted in side room at suitable height with provision of outlet PVC pipe for draining out condensed water up to floor level and gas connection by soldering or brazing including extra copper pipe duly insulated by insulated material & gas where as required and testing after installation complete all as specified and directed. 2 Supply, installation, fixing, testing and commissioning AC Split type, Intellisense inverter technology compressor, three star energy saving unit, single phase, cooling capacity 1.5 TR, including Remote Control unit,Plasma filter for better indoor air quality with minimum 3 star rating electric driven and split AC copper condensing unit (outdoor unit) fixed onsuitable size perforated angle iron frame for mounting condensing units as required and evaporator grouted in side room at suitable height with provision of outlet PVC pipe for draining out condensed water up to floor level and gas connection by soldering or brazing including extra copper pipe duly insulated by insulated material & gas where as required and testing after installation complete all as specified and directed. 3 Supply, installation, fixing, testing and commissioning AC Split type, Intellisense inverter technology compressor, three star energy saving unit, single phase, cooling capacity 2.0 TR, including Remote Control unit,Plasma filter for better indoor air quality with minimum 3 star rating electric driven and split AC copper condensing unit (outdoor unit) fixed onsuitable size perforated angle iron frame for mounting condensing units as required and evaporator grouted in side room at suitable height with provision of outlet PVC pipe for draining out condensed water up to floor level and gas connection by soldering or brazing including extra copper pipe duly insulated by insulated material & gas where as required and testing after installation complete all as specified and directed. 4 Supply, installation, commissioning of Water cooler partially stainless steel, electric driven single phase having approx storage and nominal cooling capacity 40/80 Ltrs complete all as specified and directed. 5 Supply, installation, commissioning of Water cooler partially stainless steel, electric driven single phase having approx storage and nominal cooling capacity 60/120 Ltrs complete all as specified and directed.Make : For Item No. 1 to 5 Bluestar / Daikin /Carrier /Usha / Voltas / Hitach / Lloyd 6 Supply and fix desert cooler electric driven (single phase), having nominal air flow capacity of 4000 CuM per hour (or nearest size).Plastic/PVC Body complete all as specified 7 Supply and fix refrigerator, electric driven (single phase), capacity upto to 195 Litres .BEE 5 star rated complete all as specified. 8 Supply and fix refrigerator, electric driven (single phase), capacity more than 195 Litres up to 310 Ltrs BEE 5 star rated complete all as specified.Make: Godrej / LG / Samsung/ Whirlpool / Hitachi / Voltas/ Bluestar 9 Supply, installation, commissioning of Glass Top Deep Freezer single phase 240 volt, 50 Hz, 320 Ltrs Capacity complete all as specified. 10 Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 2 KVA complete all as specified and directed.Make : V-Guard/ Vinitec/ Volina/ Power One /Sinetrac/ Microtech/ Spectron 11 Supply, Installation, testing and commissioning of ductable AC of 8.5 TR capacity, regular ductable including replacing the piping, insulation, ducting complete all as specified and directed by Engineer-in-Charge. Model No. FDR100FRV16, Make : DAIKINor equivalent model of Blue star / Carrier / Hitachi / Voltas 12 Note: Cost of the following items are deemed to be included in quoted rates:-(a) Supply, Install , Testing and Commissioning of R 410a Refrigerant Gas charging in Ductable AC to acheive desired/ specified pressure.(b) Supply, Install , Testing and Commissioning of Copper piping with insulation and communication cable of suitable size and lenghth.(c) Canvas mouth connection for ductable Indoor unit of suitable size.(d) Supply, Install , Testing and Commissioning of 24G GI fabricated duct with supports of suitable size including suitable support.(e) Supply, Install , Testing and Commissioning of Acoustic Insulation of G.I ducting.(f) Supply, Install , Testing and Commissioning of AI powder coated continous grill with colour damper for supply air.(g) Supply, Install , Testing and Commissioning of PVC drain piping with insulation and supports.(f) Supply, Install , Testing and Commissioning of ductable AC of 8.5 TR capacity complete all as specified and directed by Engineer-in-Charge.

BRR:8660199 Tender For Repair And Maintenance Of Summer Appliances At Afs Hakimpet Under Ge (Af) Hakimpet; 2 Taking down the window type air conditioner of capacity 1.5/ 2.0 TR carefully from the installed position,applying blower to remove the complete dust, cleaning all the components with caustic soda and other cleaning agent, combing the condensor coil wherever required and testing on completion complete all as directed by Engineer-in-Charge. 3 Servicing ofindoor/ outdoor unit of split type air conditioner of capacity 1.5/ 2.0 TR carefully from the installed position, applying blower to remove the complete dust, cleaning all the components with caustic soda and other cleaning agent , combing the condensor coil wherever required and testing on completion complete all as directed by Engineer-in-Charge. 4 Taking down the evaporative type desert coolers of Capacity upto 5000 Cum/hr by disconnecting all the electrical connections cleaning all the components by removing the side panels and painting the coolers (for iron body/part only) withsinglecoat of synthetic enamel paint out side and moisture resistance primer inside with spray painting and fixing back the removed panel and reconnecting with electrical connections and writing the MES No complete all as directed by Engineer-in-Charge. 5 S & F in repairs including taking down of existing oldunserviceable spare parts of following cooling appliances complete all as specified and directed by Engineer-in-Charge:- 6 a)Starting Relay for Water cooler of capacity upto 150 ltrs 7 b) Starting Relay for Refrigerator of capacity upto 310 Ltrs 8 c) Thermostat for window type/ split type Air Conditioner of capacity upto 2.0 TR 9 d)Thermostat for Water cooler of capacity upto 150 ltrs 10 e) Thermostat for Refrigerator of capacity upto 310 Ltrs 11 f) Starting Capacitor for window type/ split type Air Conditioner of capacity upto 2.0 TR 12 g)Starting Capacitor for Water cooler of capacity upto 150 ltrs 13 h) Running Capacitor for window type/ split type Air Conditioner of capacity upto 2.0 TR 14 j)Running Capacitor for Water cooler of capacity upto 150 ltrs 15 k)Running Capacitor for Refrigerator of capacity upto 310 Ltrs 16 l) Capacitor for fan motor of window type/ split type air conditioner of capacity upto 2.0TR 17 m) Blower motor suitable for existing model (invertor/ non invertor) of indoor unit of split type air conditioner of capacity upto 2.0 TR 18 n) Indoor and Outdoor Coil Sensors ( Invertor/ Non Invertor) for split type air conditioners upto 2.0 TR 19 o) Outdoor Contact Relay for split type air conditioners upto 2.0 TR 20 p) Door beading for single and double door Refrigerator/ Water cooler of any size and capacity. 21 q) Sealed Compressor for 1.5 TR window/ split type air conditioner invetor or non invertor model including bracing the suction & discharge lines. Make - Carrier/Whirpool/Copeland or as existing make 22 r) Sealed Compressor for 2.0 TR window/ split type air conditioner invetor or non invertor model including bracing the suction & discharge lines. Make - Make - Carrier/Whirpool/Copeland or as existing make 23 s) Sealed Compressor for 40/80 ltrs capacity water cooler including bracing the suction & discharge lines. Make - LG/Kirloskar/Ericson or as existing make 24 t) Sealed Compressor for 150 ltrs capacity water cooler including bracing the suction & discharge lines. Make - LG/Kirloskar/Ericson or as existing make 25 u) Sealed Compressor for upto 180 ltrs capacity refrigerator including bracing the suction & discharge lines.Make - LG/Kirloskar/Ericson or as existing make 26 v) Sealed Compressor for above 180 ltrs and upto 310 Ltrs capacity refrigerator including bracing the suction & discharge lines. 27 w) Air filter cleanable, indigenous of suitable size for the split type air conditioners of capacity upto 2.0 TR 28 x) Condensor fan blade set for the window/ split type air conditioners of capacity upto 2.0 TR 29 y) Front panel (grill) suitable for existing model of split air conditioners outdoor unit of capacity upto 2.0 TR 30 z) Nitrile tubing over gas circulating copper tubes for suction and discharge lines of split type air conditioner of capacity upto 2.0 TR 31 aa) PCB Board unit suitable for existing make of split type air conditioners (Invertor/ Non Invertor) of capacity upto 2.0 TR 32 ab) Condensing coil copper for refrigerator 310 Ltrs capacity 33 ac) Copper tubes of suitable size for suction and discharge lines for split type air conditioners including necessary bracing and testing Note: One run of suction, one run of dicharge shall be measures as one unit length. 34 ad) Submersible water pump suitable for evaporative type desert coolers of capacity upto 5000 Cum/hr 35 ae) Khus khus pads/ Honey Pads of various model (set of 3 Nos) for the evaporative desert coolers of capacity upto 5000 cum/hrs 36 af) PVC hose pipe alongwith necessaery fittings ad PVC distributor suitable for existing model of evaporative type desert cooler upto the capacity of 5000 cum/hr 37 ag) Rotary/ piano type switch suitable for existing model of desert coolers of capacity upto 5000 CuM/Hr 38 ah) Fan blade set suitable for existing model of desert coolers of capacity upto 5000 CuM/Hr 39 aj) PVC Insulated and PVC Round Sheathed three Core, 1.5 sqmm Copper Conductor Heavy Duty Cables for Voltage Grade upto 1100 Volts 40 ak) PVC Insulated and PVC Round Sheathed three Core, 2.5 sqmm Copper Conductor Heavy Duty Cables for Voltage Grade upto 1100 Volts 41 al) Single pole and neutral enclosure MCB DB alongwith a 20 Amps rated SP MCB,two pin plus earth plug and socket, 230 Volts, 50 Hz 42 am) Plug top, 3 pin, 16 Amps, single phase, 230 volts 43 an) Ball brass valve, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule of size 15mm dia bore suitable for water coolers. 44 ao) PVC connection 15mm size with PTMT nuts of length 600mm 45 ap) Chromium plated push button tap of size 15mm dia bore suitable for water coolers 46 aq) Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe. 47 ar) PVC waste water pipe of size 32/40mm dia 48 as) PVC Insulated and PVC Round Sheathed four Core, 2.5 sqmm Copper Conductor Heavy Duty Cables for Voltage Grade upto 1100 Volts 49 at) Supply and fix in repair MCB SP 20 Amps, 240V suitable for split type air conditioner upto 2 TR 50 au) Supply and fix in repair Metal clad AC Male and Female socket suitable for air conditioner upto 2 TR 51 av) Supply and fix in repair evaporative coil suitable for air conditoner upto 2 TR Capacity 52 aw) Supply and fix in repair Condensing coil suitable for air conditoner upto 2 TR Capacity 53 Taking out the burnt fan motor from the following cooling appliances, cutting and removing the winding and Material & labour for rewinding with super enamelled copper wire of existing gauge, applying insulation varnish, pre heating and binding with empire tubes, crimple sheet etc. as required for rewinding complete all as specified and directed by Engineer-in-charge:- 54 a) Window/ split type Air Conditioner of capacity upto 2.0 TR 55 b)Evaporative type desert cooler of capacity upto 5000 Cum/hr 56 Material & labour for filling up & charging of environmentally suitable refrigerant for following cooling appliances after leak testing the complete system and making good by bracing including replacement of filter strainer copper and capillery tube of suitable size complete all as specified and directed by Engineer-in-Charge. 57 a) Window type Air Conditioner of capacity upto 2.0 TR 58 b) Split type Air Conditioner of capacity upto 2.0 TR 59 c) Water cooler of capacity upto 150 Ltrs 60 d)Refrigerator/Deep freezer of capacity upto 310 Ltrs 61 Taking out defective PCB control unit of split type air conditioners Invertor/ Non Invertor type of capacity upto 2.0 TR and rectifying the defects by replacing unserviceable ICs, diodes, capacitors, resistors etc and refing back and testing on completion complete all as specified and directed by Engineer-in-Charge. 62 Takingdown carefully the indoor and outdoor unit alongwith voltage stabilizer of Split Type Air Conditioner of capacity upto 2.0 TR by disconnecting all electrical connections, suction and discharge lines fromits installed position and shifting to another location where directed and installing the indoor and outdoor units alongwith stabilizer at specified location and connecting all the electrical, suction and discharge lines and testing on completion for proper functioning complete all as specified and directed by Engineerr-in-Charge. 63 Material and labour for making hole in to the wall , stone masonary/brick work up to 80mm dia for installing/fixing of split type AC with and including making the surface smooth with cement mortar complete all as specified and directed. 64 Supply and fixing pre-fabricated MS bracket assembly (set of two) complete with nuts and bolts of suitable size for fixing of split type AC outdoor unit complete all as specified and directed. 65 Supply and fixing of Indoor unit of air conditioner upto 2.0 TR Capacity complete all as specified and directed by Engineer-in-Charge. 66 Supply and fixing of Outdoor unit of air conditioner upto 2.0 TR Capacity including compressor complete all as specified and directed by Engineer-in-Charge. 67 Taking down the stabilizer any type of capacity 4/5 KVA carefully from the installed position, dismantling the complete unit, cleaning all the components with makingrepair/replacement of minor parts of costing not more then Rs 500 andreassembling the complete unit and re-installing in its original position and testing on completion complete all as directed by Engineer-in-Charge. 68 Taking down the stabilizer any type of capacity 2/3 KVA carefully from the installed position, dismantling the complete unit, cleaning all the components with makingrepair/replacement of minor parts of costing not more then Rs 400 andreassembling the complete unit and re-installing in its original position and testing on completion complete all as directed by Engineer-in-Charge. 69 Supply only AC remote suitable for AC 1.5/2 TR window/split type (Invertor/ Non Invertor). Note- Material will be supplied as existing model or sample given by Engr-in-charge. 70 Supply and fixing of extra heavy duty remote battery 1.5 volt complete . 71 M&L for sub main wiring surface/recessed as required with two single core 6 sqmm PVC insulated and unsheathed copper conductor, multistranded 1100 volts grade through and including non metalic rigid PVC conduit including 6 sqmm copper conductor multistranded PVC insulated and unsheathed wire as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing U/S sub main wiring and making good the disturbed surface to match with the existing all as specified and directed.( Note :- Two run of 6 sqmm cable and one run of earth wire and one run of non metalic conduit shall be measured and paid as 01 RM. 72 M&L for sub main wiring surface/recessed as required with two single core 4 sqmm PVC insulated and unsheathed copper conductor, multistranded 1100 volts grade through and including non metalic rigid PVC conduit including 4 sqmm copper conductor multistranded PVC insulated and unsheathed wire as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing U/S sub main wiring and making good the disturbed surface to match with the existing all as specified and directed.( Note :- Two run of 4 sqmm cable and one run of earth wire and one run of non metalic conduit shall be measured and paid as 01 RM.

BRR:8660198 Comprehensive Maintenance Of Internal E/M Items At Cassel Road, Church Road, Hq Delhi Area, Stn Hq Did Line, Dapu, Harbux Stadium, Printing Press Complex, 10 Pars, Echs, 1 Dte, Huts And Connected Areas Under Ge (East) Delhi Cantt-10; 1 Taking down/ out carefully copper/aluminium point wiring for light/fan/bell/ sockets 5/15 Amps complete without accessories as switches,Sockets, holders,ceiling roses,light fitting regulators etc ( to be measured separately) and making good the disturbed surface all as directed. 2 M&L for point wiring with single core fire retardant low smoke PVC insulated, unsheathed multi stranded copper conductor of size 1.5 sqmm alongwith 1.5 sqmm earth wire of multi strand copper conductor (with same specification) connected to common earth dolly and drawing through existing surface/concealed conduit pipe and in existingMS box/modular box covered and modular plate (top cover)for mounting switches, sockets or fan regulators etc for the following :- 3 One light point/ fan point/ bell point controlled by one switch 4 One socket outlet 5 Amps controlled by one switch on same board. 5 One socket outlet 5 amps controlled by one switch on independent board 6 One light point controlled by two 2 way switches 7 Description all as per item No. 2 here in before but wiring with 2.5sqmm copper wire and 2.5sqmm earth wire for socket out let on independent board. 8 S&F switch piano flush type, 6 amps one way,SP,230 volts AC all as directed. 9 S&F switch piano flush type, 6 amps two way,SP,230 volts AC all as directed. 10 S&F switch piano flush type, 16 amps one way,SP,230 volts AC all as directed. 11 S&F switch pianobell push flush type, 6 amps one way,SP,230 volts AC all as directed. 12 S&F socket outlet 6 amps 5 pin , all as directed. 13 S&F socket outlet 6&16 amps 6 pinall as directed. 14 S&F piano type Stepfan regulator, 120 watts single module swich type/socket type and as specified and directed by Engr-In-Charge all as directed. 15 S&F modular switch flush type, 6 amps one way,SP,230 volts AC all as directed. 16 S&F modular switch flush type, 6 amps two way,SP,230 volts AC all as directed. 17 S&F modular switch flush type, 16 amps one way,SP,230 volts AC all as directed. 18 S&F modular switch bell push flush type, 6 amps one way,SP,230 volts AC all as directed. 19 S&F modular socket outlet 6 amps 5 pin 2 moduleall as directed. 20 S&F modular socket outlet 6 & 16 amps 6 pin multipurpose combined 2 module all as directed. 21 S&F modular Step Fan regulator, 120 watts single / double module all as directed. 22 S&F in repair Modular white cover plate with frame 1 module all as directed 23 S&F in repair Modular white cover plate with frame 2 module all as directed 24 S&F in repair Modular white cover plate with frame 3 module all as directed 25 S&F in repair Modular white cover plate with frame 4 module all as directed 26 S&F in repair Modular white cover plate with frame 6 module all as directed 27 S&F in repair Modular white cover plate with frame 12 module all as directed 28 S&F in repair Modular white cover plate with frame 18 module all as directed 29 S&F in repair Modular Metal Flush Box 1/2 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making goodthe existing surface complete all as specified and as directed 30 S&F in repair Modular Metal Flush Box 3 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making goodthe existing surface complete all as specified and as directed 31 S&F in repair Modular Metal Flush Box 4 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making goodthe existing surface complete all as specified and as directed 32 S&F in repair Modular Metal Flush Box 6 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making goodthe existing surface complete all as specified and as directed 33 S&F in repair Modular Metal Flush Box 12 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making goodthe existing surface complete all as specified and as directed 34 S&F in repair Modular Metal Flush Box 18 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making goodthe existing surface complete all as specified and as directed 35 Supply and fixing in replacement of lamp holder PVC/ Polycarbonate type insulated body with back plate suitable for batten fittings complete all as specifed and as directed. 36 Supply and fixing in replacement of Ceiling rose, insulated body, 3 terminal, 240 volts complete all as specified and as directed. 37 Supply and fixing in replacement of electric bell of DINGDONG type, 6 Amps, 240 volts, single pole and making all necessary connections complete all as directed. 38 Supply and fixing in replacement of wall light fitting decorative type suitable for LED lampcomplete all as directed. 39 Supply and fixing in replacement of LED bed side light, 5/6 Watts, wall mounted type and making all electric connections complete all as specified and directed. Make-philips with cat no 919215850141 and equivalent 40 S & F in replacement LED energy efficient integrated battens fittings, PVC extruded heat sink with shatter proof opal shell of polycarbonate compound, 20 Watts lumens 120 to 160 per watt, cool/warm white as per site requirement complete all as specified and directed.. 41 S & F in replacement ofLED energy efficient integrated battens fittings, PVC extruded heat sink with shatter proof opal shell of polycarbonate compound, 10 Watts lumens 120 to 160 per watt, cool/warm white as per site requirement complete all as specified and directed.. 42 S&F in replacement of bulk head fitting 6.5 W with PMMA diffuser complete all as specified and directed. 43 Supply and fixing in replacement of LED ceiling light fitting 15 watt, in round shape, surface/recess type cool/warm white with inbuilt driver as per site requirement and making all electric connections complete all as directed. 44 Supply and fixing in replacement of LED ceiling light fitting 10 /12watt, in round shape, surface/recess type cool/warm white with inbuilt driver as per site requirement and making all electric connections complete all as directed. 45 S & F in replacement of energy efficient LED fittings 45W LED suitable for building security light pressure die cast aluminium roadway luminaire with high power LEDs and HF electronic driver complete all as directed. 46 Supply and fixing in replacement of street light fitting bracket, 1.0 mtr long made out of galvanized iron pipe of 25 mm dia size light grade complete with nut, bolts, washer, clamps etc inclusive of one primer coat, one under coat and one finishing coat of silver paint complete all as directed. 47 Material and labour for replacement of submain wiring complete with 2 x 4.0 sqmm(nominal area) FRLS, PVC insulated, unsheathed and multistranded copper conductor cable (FRLS) ISI marked, and 1 x 4 sqmm( same specification ) as earth wirein existingPVC conduitcomplete all as directed. Make : Grandlay/ Havells/ RR. 48 Material and labour for replacement of submain wiring complete with 2 x 10.0 sqmm(nominal area) FRLS, PVC insulated, unsheathed and multistranded copper conductor cable (FRLS) ISI marked, and 1 x 10 sqmm( same specification ) as earth wirein existingPVC conduit complete all as directed. Make : Grandlay/ Havells/ RR. 49 Material and labour for replacement of submain wiring complete with 2 x 16.0 sqmm(nominal area) FRLS, PVC insulated, unsheathed and multistranded copper conductor cable (FRLS) ISI marked, and 1 x 16 sqmm( same specification ) as earth wirein existingPVC conduit complete all as directed. Make : Grandlay/ Havells/ RR. 50 Supply and fixing in replacement of MCB C Curve type, 10 kA, 10 to 32 Amp, Single Pole with over load and short circuit protection complete all as directed. Make-Siemens/ HPL/ Legrand/ LK/ Havells/ Schneider/ Standard/ Benlo . 51 Supply and fixing in replacement Isolator/MCB SPN 32/40 A including connections complete all as specified. Make-Siemens/ HPL/ Legrand/ LK/ Havells/ Schneider/ Standard/ Benlo . 52 Supply and fixing in replacement Isolator/MCB SPN 63 A including connections complete all as specified. Make-Siemens/ HPL/ Legrand/ LK/ Havells/ Schneider/ Standard/ Benlo . 53 Supply and fixing in replacement Isolator/MCB TPN 40 A including connections complete all as specified. Make-Siemens/ HPL/ Legrand/ LK/ Havells/ Schneider/ Standard/ Benlo . 54 Supply and fixing in replacement Isolator/MCB TPN 63 A including connections complete all as specified. Make-Siemens/ HPL/ Legrand/ LK/ Havells/ Schneider/ Standard/ Benlo . 55 Supply and fixing in replacement ofModular AC25 Amps SPmini MCB, 230 Volts, 50Hz formodule sheet complete all as specified and as directed. 56 S&F MCB DB conforming to IP 43 - IK 09 with double door, SPN 16/12 way, double door complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces. Make-Siemens/ HPL/ Legrand/ LK/ Havells/ Schneider/ Standard/ Benlo . 57 S&F of MCB DB conforming to IP 43 - IK 09 with double door,SPN 08 way, double door complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces. Make-Siemens/ HPL/ Legrand/ LK/ Havells/ Schneider/ Standard/ Benlo . 58 S&F of MCB DB conforming to IP 43 - IK 09 with single door,SPN 04 way, double door complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces. Make-Siemens/ HPL/ Legrand/ LK/ Havells/ Schneider/ Standard/ Benlo . 59 Supply and fixingin replacement of MCCB incommer Distribution Board ( Vertical Load line DB)double Doormade out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, VTPN 04 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCCB as incommer and MCB as outgoing and making all necessary connections and taking out the old unserviceable DB complete all as directed. Make-Siemens/ HPL/ Legrand/ LK/ Havells/ Schneider/ Standard/ Benlo . 60 S&F in replacement of TPN DB 04 way double door confirming to IP43 & IK 09 protection complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces. Make-Siemens/ HPL/ Legrand/ LK/ Havells/ Schneider/ Standard/ Benlo . 61 S & F in replacement of MCCB, 415 volts, three pole of cap 100/125 Amps, 10 KA, ICS = 100% ICU, with Thermal - Magnetic Release, including necessary spreader / thimbles of suitable size and making connections complete all as directed. Make-Siemens/ HPL/ Legrand/ LK/ Havells/ Schneider/ Standard/ Benlo . 62 Supply and fixing of PVC casing & caping ( ISI marked)20 mm width double lock type inclusive of all fittings such as tees, bends, elbow, etc and all fixing accessories complete all as directed. 63 S&F in replacement of rigid non metallic PVC conduit 20 mm dia inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hook etc complete for surface mounted / concealed including cutting chases in wall and making good the surface all as specified and and as directed. 64 Supply and fixing in replacement of Ventilatingfan 250 mm sweep plastic body type including self cosing louver and making all electric connections complete all as directed. 65 Supply and fixing in replacement of Ventilatingfan 200 mm sweep plastic body type including self cosing louver and making all electric connections complete all as directed. 66 S&F electric Wall mounted 400mm sweep BLDC fan aerodynamically designed resin blades with powder coated guard with flexible ringand oscillation and speed control by pull cord system,connected compete all as specified and directed . 67 S&F in replacement of ceiling fan complete with blades ,down rods and accessoriess ,230 volt ,1200mm (28W)/1400mm (35 W) sweep, min air delivery 225 CMM with service value 7.00 BEE 5 star rated with BLDC with remote control for operating , complete all as specified. 68 Supply and fixing exhaustfan upto 300 mm sweep metalic body typeand making all electric connections complete all as directed and depositing the old U/s item to MES store yard. 69 M&L for rewinding of exhaust fan(300mm)/wall mounting fan(400mm)with super enamelled copper wire of required size duly varnishing including greasing/oiling and commissioning/testing to the entire satisfaction of Engineer-in-charge. 70 M&L for rewinding of Ceiling fan 1200/1400mm sweep with super enamelled copper wire of required size duly varnishing including greasing/oiling and commissioning/testing to the entire satisfaction of Engineer-in-charge. 71 S & F in replacement plastic body capacitor of capacity 2.5 MFD with wire suitable for single phase motor and making connection complete all as specified and directed 72 S&Fin replacement of ball bearing No 6201/6202 suitable for ceiling fan complete all as specified and directed. 73 M & L for ceiling fan down rod fabricated out of MS pipe medium grade 15 mm dia cut to length as per site requirement duly painted white with synthetic enamel paint over a coat of red oxide primer having through hole and cut of suitable size at both end for fixing ceiling fan and clamp etc complete all as specified and as directed 74 S&F MS clamp with rubber real including nut, bolt and split suitable for ceiling fan to hook complete all as specified and as directed. 75 S&F PVC Gang Box suitable for one No 5 Amps Switch and one No 5 Amps Socket complete all as specified and as directed. 76 S&F PVC Gang Box suitable for two No 5 Amps Switch and two No 5 Amps Socket complete all as specified and as directed. 77 S&F PVC Gang Box suitable for one No 15 Amps Switch and one No 15Amps Socket complete all as specified and as directed. 78 S & F in replacement ofplug top 3 pin 10/20 amp earth metal clad suitable for industrial type DB complete all as directed. 79 S & F in replacement of socket 3 pin 10/20 AMP earth metal clad suitable for industrial type DB complete all as directed. 80 Supply and fixing in replacement ofT coverBakelite sheet 2 mm thick in round shape complete all as specified. 81 Supply and fixing in replacement of Bakelite sheet 3mm thick of size 5x5 duly wire cut for switches, sockets, regulator etc as per site requirement as directed. 82 S&F in replacement of Bakelite sheet 3mm thick of size 8x5 duly wire cut for switches, sockets, regulator etcas per site requirement as directed. 83 S&F in replacement of Bakelite sheet 3mm thick of size 8x10duly wire cut for switches, sockets, regulator etcas per site requirement all as directed. 84 S&F in replacement of Bakelite sheet 3mm thick of size 10x12 duly wire cut for switches, sockets, regulator etcas per site requirement all as directed. 85 Taking down old unserviceable LT U/G cable any size and core complete all as specified. 86 Supply, laying & testing XLPE insulated armoured heavy duty U/G aluminium conductorcable served with an inner sheathing of PVC tape armoured with galvanised steel strip wire or tape and overall PVC sheathedof size 10 Sqmm 2 core. Make : Polycab/ Gloster/ Havells/ Plaza/ Finolex. 87 Description all as per item No 81 above but 25 sqmm, 4 core. 88 Description all as per item No 81above but 50 sqmm, 3.5 core. 89 Excavation in trenches in soft / loose soil not exceeding 1.5 meter depth and not exceeding 1.5 meter wide and getting out including trimming of sides complete all as directed. 90 Material and labour for brick protection to cable using old size class Bbricks, laid flat, dry butt jointed, laid lengthwise perpendicular to the axis of cable complete all as directed. 91 Material and labour for sand cushioning with a layer of fine sand 8 cm thick before laying the cable and 15 cm after laying the cablein trenches to cover under ground cable complete all as directed. 92 Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as directed. 93 Removal of excavated material n exc 50m and depositing n exc 1.5m above starting point complete all as specified and as directed.. 94 S&F in replacement ofGalvanised Steel tubing light grade of size 50mm bore under floor/road etc complete all as specified and as directed. 95 Supply and fixing in replacementelectricwater heater storage type steel body with heating element upto 2 KW CAPACITY 25 LITER BEE 5 star rated complete with all accessories such as safety valve thermostat NRV connection etc 96 Supply and fixing in replacement of heating element 1.5 KW capacity round/triangular/banana/inbuilt thermostat pipe type for geyser of any type/Make and capacity including making necessary electric connections and testing the geyser complete all as directed. Note : The petty items such as nut, bolt, clamps etc are deemed to be included in quoted rates. 97 Supply and fixing in replacement of thermostat ISI marked for geyser of any type/Make and capacity ,including making necessary electric connections and testing the geyser complete all as directed. 98 M &L in replacement Stainless steel Geyser tank (inner) 25/35 Ltr capacity suitable for fixing in 6/9 nut assembly complete all as specified and directed. 99 M &L in replacementStainless steel Geyser tank (inner) 50 Ltr capacity suitable for fixing in 6/9 nut assembly complete all as specified and directed. 100 M &L in replacement of base plate assembly of 6/9 holes suitable for fixing on a geyser tank 25/35/50 Ltr capacity incl Nuts & rubber packing for water tight joint complete all as specified and directed. 101 Supply and fixing in replacement of steel wired connection 600mm long and C P brass adopter 15 mm dia with washer for geyser of any type/Make and capacity complete all as directed. 102 Supply and fixing in replacement of CP non return valve in position internally screwed on one end and externally screwed on other ends, suitable for iron pipe of size 15mm dia, suitable for geyser of any type/Make and capacity complete all as directed. 103 Supply and fixing in replacement of indicator lampred/green suitable for geyser of any type/Make and capacity including making necessary electric connections and testing complete all as directed. 104 Supply and fixing in replacement of PVC insulated PVC sheathed (FRLS) 3 core 1.5 sqmm copper conductor multistranded cable complete all as specified and as directed 105 S&F in replacement PVC plug top, 3 pin 16 Amps, 230 Volts, 50 Hz. Complete all as specified and directed 106 S&FSteel fastneer of 4 long and 8mm dia with Nuts& washer complete all as specified and as directed. 107 S & F in replacement of PVC flexible pipe 20mm bore complete all as specified and directed. 108 S& F in replacement of Static Energy Meter single phase electronic type with LCD display of capacity 10-40A including connection with seal and sealing wire including taking out the old u/s and depositing to MES store yard complete all as specified and as directed Make : L&T/Havells/HPL/ Benlo. 109 S& F in replacement of Static Energy Meter three phase electronic type with LCD display of capacity 10-60A including connection with seal and sealing wire including taking out the old u/s and depositing to MES store yard complete all as specified and as directed Make : L&T/Havells/HPL/ Benlo 110 Material and labour for earthing complete with GI earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground not less than 2.25 mtrs below ground level with top edge of plate not less than 1.5 mtr deep below normal ground level connected to galvinised earth wire 4 mm by means of nuts, bolts and check nut to earth plate and to main board or DB including necessary PCC 1:2:4 type B-1 pit, cover frame , GI pipe 15 mm dia light grade for protection and GI pipe 20 mm dia medium grade for watering with funnel, wire mesh, salt and charcoal dust all over the plate all as specified and as directed. 111 Taking down Window/Split Type Air Conditionerof any make, size of 1.5/2 Ton capacityfrom existing site for servicing by dismantling all electrical items/connected parts and spray cleaning by means of electric air blower and water descaling by using acid on both side of cooling coil and condenser cleaning with nylon brush and washing with clean water to ensure proper cleaning before reassembling complete unit and refixing at site including testing and commissioning complete all as specified & as directed at site to the entire satisfaction ofGE. Note :- (a)Parts found defective after dismantling of ACs requiring replacement will be measured and paid separatelyunder relevant items described here in after however other parts required for dismantling/reassembling of the ACs will be deemed to be included in the quoted rate. 112 Material and labour for replacement of rotary type compressor for window type AC cap 1.5 TR Make and type as per existing compressor making suction pipe and discharge pipe connections with copper welding/brazing making it leak proof. Pressure testing vacuuming complete all as specified and as directed. 113 Material and labour for replacement of rotary type compressor for Split AC cap 1.5 TR Make and type as per existing compressor making suction pipe and discharge pipe connections with copper welding/brazing making it leak proof. Pressure testing vacuuming and charging of refrigerant, complete all as specified and as directed. Make LG / Voltas/ Daikin. 114 Material and labour for replacementofrotary type compressor for Split AC cap 2 TR make and type as per existing compressor making suction pipe and discharge pipe connections with copper welding/brazing making it leak proof.Pressure testing vacuuming complete all as specified and as directed.Make LG/Voltas/ Daikin. 115 Material and labour for replacement of starting relay with connecting leads suitable for any type and make of window / Split air conditioner of 1.5 / 2 Ton capacity, complete all as specified and as directed. 116 Material and labour for detecting leakage in window type/Split AC’s cap 1.5/2 TRby pressure testing and making it leak proof by copper welding/brazing, vacuuming andcharging of refrigerant any type as per previous to pressure as per manufacturer specification complete all as specified & directed 117 Material and labour for replacement of front grill suitable for any type and make of window air conditioner 1.5 T R capacity having good aesthetic look good quality complete all as specified and as directed. 118 Material and labour for replacement ofdouble shaft fan motor 1/5 HP for Window AC 1.5 TR Make and type as per existing motor, complete all as specified and as directed. 119 Material and labour for replacement ofsingle shaft fan motor 1/5 HP for Split AC 1.5 / 2 TR Make and type as per existing motor, complete all as specified and as directed. 120 Material and labour for replacementof capacitor Running Cap 36 to 45 MFD suitable for operating voltage 240 Volt, 50 HZ, complete all as specified and as directed.Make : Surya/Usha/TIBCON/Tibcap 121 Material and labour for replacement of starting capacitor 80-100 MFD, complete all as specified and as directed.Make : Surya/Usha/TIBCON/Tibcap 122 Material and labour for replacement of starting capacitor 120 MFD, complete all as specified and as directed. 123 Material and labour for replacement of blower motor capacitor 6 MFD suitable for operating voltage 240 volt, 50 HZ, complete all as specified and as directed. 124 Material and labour for replacementof air filter element for 1.5 / 2 ton window/ Splittype air conditioner of any make and type as per sample, complete all as specified and as directed. 125 Material and labour for replacement of thermostat suitable for any type and make of window/ Split typeAir conditioner 1.5/2 ton capacity, complete all as specified and as directed.Dasspass/Theeta/ Denfos / Indfos 126 Material and labour for replacement of blower motor 0.5 HP with blower blade assembly complete in all respect for operating voltage 240 volts, 50 HZ and for any type or make of split air conditioner of 1.5/2 ton capacity, complete all as specified and as directed. 127 Material and labour for replacement of swing motor assembly complete in all respect for operating voltage 240 volts 50 HZ and for any type and Make of window /Split type air conditioner of 1.5/2 Ton capacity, complete all as specified and as directed. 128 Supply and fixing in replacement of Remote suitable for window/split AC of 1.5/2 TR capacity complete all as specified Make LG / Voltas/ Daikin. 129 Supply and fixing in replacement of PCB card suitable to run window AC any capacity and indoor unit of Split AC any type or capacity complete all as specified and and as directed 130 Supply and installationofVoltage stablizer 4KVA Capacity, range 170V to 270 Volts, 50 HZ, including depositng the old u/s stabliser to MES store yard complete all as specified and as directed.Make Bluebird/ V guard / Volini 131 Supply and fixing in replacement of Outdoor unit mouting bracket fabricated out of MS sheet including nuts and bolts complete all as specified and directed 132 Supply only FRLS PVC insulated unsheathed single core multistranded copper conductor wire of size 1.5 sqmm, 1100 volts grade cable. 133 Supply only FRLS PVC insulated unsheathed single core multistranded copper conductor wire of size 2.5 sqmm, 1100 volts grade cable. 134 S&F in replacement of LED lamp 9W, with base B22 , round type, 230V, AC-50 Hz, warm/cool white as per site requirement complete all as directed. 135 Supply and fixing motor with proper copper winding with capacity vary from 30 to 45 watt and running the exhaust /fresh air fan per site requirement complete all as directed. 136 S & F in replacement of LED Bollard Fittings 10W suitable for pathway lights incl making electric connections complete all as specified and directed. 137 Supply and fixing Wooden screw /Machine screw of size of 8 mm dia and length at least 35mm or size as decided by Engr-In -chargeto fix the the board or boxes and other electric accessories as specified and directed by Engr-In-Charge. 138 Supply and fixing thimble of material copper for wire of size 6/10/16 sqmm to fix the terminating end of the wiring complete all as specified and directed 139 Supply and fixing in replacement a bunch comprising of copper tube 3/8 inch in liquid line and copper tube 1/8 inch in gas line duly insulated including single run of 3 core PVC sheathed copper conductor cable 2.5 sqmm complete all as specified and as directed.

BRR:8660185 Tender For providing Of Office Space And Allied Infra For Qmg Branch At Bb Cantt, Srinagar - 1 Surface excavation n. exc 30 cm deep and averaging 15 cm deep and getting out in soil,complete allas specified and directed. 2 Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth forfoundation, etc. or for shafts, wells, cesspits, manholes, pier holes, or for laying of cables etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting outt in soft/loose soil, complete allas specified and directed. 3 M & L for plain cement concrete1 : 4 : 8Type D2using 40 mm graded crushed stone aggregsate, as in foundation, filling and mass concrete, complete allas specified and directed. 4 Form work to sides of concrete foundation, footings plinth beam etc., vertical or to batter, complete allas specified and directed. 5 M & L for reinforced cement concrete 1:2:4 type B1 using 20 mm graded crushed stone aggregsate) as in foundationfootings, foundation beam,plinth beams and bases of columns basement slabs, and mass concrete, complete allas specified and directed. 6 Form work to sides and soffits of floor or roof beams, beam, lintels, cantilevers etc, fair finished surface,complete allas specified and directed. 7 M&L reinforced cement concrete 1:2:4 type B1 using 20 mm graded crushed stone aggregsate,as in beams, cantilevers , bressummers, lintels over 1.5 m span complete allas specified and directed. 8 Form work to soffits of suspended slab such as roof slab, landings and similar work . (Horizontal or sloping).For fair finished surface n.exc 200 mm thick complete allas specified and directed. 9 M & Lfor reinforced cement concrete 1:2:4 type B1 using 20 mm graded crushed stone aggregsate as in columns pillers, piers, posts and struts complete allas specified and directed. 10 Form work to sides of pillars, posts, struts, piers, columns, fair finished surfacecomplete allas specified and directed. 11 M & Lfor reinforced cement concrete 1:2:4 type B1 using 20 mm graded crushed stone aggregsate,as in slabs supported on walls beam and colums in floors, roofs, landing, deck slabs and shelves and the like complete allas specified and directed. 12 S & FTMT steel bars 10 mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking end and binding with and including MS wire annealed not less than 0.9 mm dia,complete allas specified and directed. 13 S & FTMT steel bars 5 to 10 mm dia in stirrups, spacers and binders and binding with and including MS wire annealed not less than 0.9 mm dia, complete allas specified and directed. 14 Returning, filling in, including spreading levelling, watering and well ramming in layersnexc25 cm in soft/loose soil, complete allas specified and directed. 15 M&L Removing excavated soils not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point,complete allas specified and directed. 16 M & Lfor brick work with sub class B bricks straight or curved on plan exc 6 m mean radius built incement mortor1 : 6, complete allas specified and directed. 17 M & L brick work with sub class B bricks straight or curved on plan to anyradius built in cement mortor 1 : 4 in half brick thick walls,complete allas specified and directed. 18 M & L for 20mm thick Damp proof coursein cement mortor 1:2 to horizontal or vertical surfaces including necessary formwork, complete allas specified and directed. 19 Supply only Integral waterproofing compound,complete allas specified and directed. 20 M & L for Sand filling under floors or in foundations including watering and consolidation,complete all as specified and directed. 21 M & L broken stone hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface, complete all as specified and directed. 22 M & L for 75 mm thick plain cement concrete 1:4:8 Type D2 ( using 40 mm graded crushed stone aggregate) as in sub base to floors, complete all as specified and directed. 23 M&L for 25 mm thickplain cement concrete 1:2:4 type B-0 ( using 12.50 mm graded crushed stone aggregate) as in sub base of floors finished even and fair, complete allas specified and directed. 24 M&L for Virified Ceramic light shade tiles 10 mmthick (square/ rectangular polished, area of each tiles exceeding 0.42 sqm and not exceeding 1.00sqm, in floors etc. set and jointed inneat cement slurry and pointed incement to match white or colouredover and including 15mm thick screed bed or bedding layerin cement mortar 1:4 ,complete all as specified and directed 25 M&L Vitrified Ceramic light shade tiles 10 mmthick (square/ rectangular polished, area of each tiles not exceeding 0.36 sqm, as in skirting, dados, walls, vertical surfaces etc. set and jointed inneat cement slurry and pointed incement to match white or colouredover and including 10mm thick backing coat in cement mortar 1:3, complete all as specified and directed. 26 M&L for Non - skid Ceramic colourtiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles and including 15mm thick screed bed or bedding layer in cement mortar 1:4 ,complete all as specified and directed 27 M&L Glazed ceramic colour tiles in vertical surface 350x 250x 7 mm/ 450X350X 7mm thick, as in skirting, dados, walls, vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick backing coat in cement mortar 1:3, complete all as specified and directed. 28 M&L Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. of Gde Fe 410-W (Gde- E-250) Qty-A,complete all as specified and directed. 29 S & F Plates (plain or chequered) channels, square cut or notched (ordinary & counter sunk) forming holes, with riveted, bolted or welded attachmentof Gde Fe 410-W (Gde- E-250) Qty-A,complete all as specified and directed. 30 S & F 16mm dia mild steel screw bolt (machine made) with hexagonal or square head at one end and screwed the other or screwewd both ends, each screwed end to be fitted with washers and one hexagonal or square nut length of bolt exc 15cm and n exc 22.5cm long, complete all as specified and directed. 31 S & F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. 32 Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. 33 M&L for 1st class softwood (Australlian wood) as per J& K local practicepanelling 10 mm thick including 9 mm thick BWR plywood on the wall and finally finishing with french polish (two or more coats) and fixed, complete all as specified and directed 34 M&L for false ceiling,pattern wooden like (khatamband pattern) as per J & K local practicedesign as approved by GE with ornamental wood work made out of ornamentalwood pattern including 12 mm thick BWR plywood and necessary framework and finally finishing with french polish (two or more coats) and fixed, complete all as specified and as directed 35 S&F 6MM Tthick Non asbestos fibre cement designer board /pre Laminated self embossed texture designer board E-Board classic size 600x600 m , HPSC (High pressure steam cured) to be fixed or inserted to pre laminated GI Frame work for Seamless ceiling size 600mmx600mm with main runner 38x24x0.9mm thick cross tee 8.6x0.9mm and wall angle 19x19x0.9mm duly suspended with 6mm dia GI bar hanger 1200mm centre to center both ways fixed with steel dash fasteners or from purlin from the roof with alignment dip complete as per manufacturers instructions, complete allas specified and directed. 36 S&F 20mm thick 2nd class softwood clean sawn boards or planks, width n exc. 25 cm as in eavs board/ wall boarding etc.,complete all as specified and directed. 37 M & L for 10mm thick rendering on fair faces of brick work or concrete surface in cm 1:4 to be finished even and smooth with out uing extra cement,complete all as specified and directed. 38 M & L for 10mm thick rendering on fair faces of brick work or concrete surface in cm 1:6 to be finished even and smooth with out uing extra cement, complete all as specified and directed. 39 M&L for rendering 5mm thick in cement mortar (1:3) & finishing the surface even & smooth without using extra cement as in ceiling, soffits of slab complete all as specified and directed. 40 M & L for preparing surface of newly plasteredwalls with 3mm thick wall care putty and applying two coats of Apex (ultima) paint over a coat of primer, complete all as specified and directed. 41 M & L for preparing surface of newly plasteredwalls and applying two coats of oil bond distemper over chalk whitening preparatory to distempering,complete all as specified and directed. 42 M & Lfor 2nd class hard wood, plain straight, solid chawkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, supplied and fixed,complete all as specified and directed. 43 S & F 2nd class hard wood 35mm thick plain framed panlled shutters (any numbers of panels) of 2nd class hard wood with panels of timber flat on both sides or of veenerred particles boards medium density, wood particle board with commercial face veereerscomplete all as specified and directed.. 44 S & F aluminium powder coated ventilators made of thefollowing specifications :-(Net external size of ventilator shall be measured.Following items are included in this unit rate.)(a)Aluminium frame powder coated stiles, bottom, top and middle rail of hollow section 50 mm x 25 mm x 1.80 mm thick.(b)Lower portion of ventilator shall be fixed with 3 mm thick pin headed glass fixed with suitable aluminium beading clips and EPDM beading (rubber).(c)Upper portion shall be fixed with aluminium powder coated louver guides fixed with 3 mm thick pinheaded glass with suitable EPDM beading incl suitable handle and clips.(d) Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with suitable frame in upper panel.(e) Repair to the jamb, cills and all sides around the window is incl in unit rate.The repair finishes to match the existing surfaces like tiles, plastering etc. 45 S & F aluminium powder coated sliding window made of thefollowing specifications :-(Net external size of window shall be measured.Following items are included in this unit rate.)(a)Aluminium frame powder coated all around of hollow section 100 mm x 44 mm x 1.60 mm thick.(b)Provn of 03 trade runners of size 92 x 31.75 x 1.10 mm.(c)Provn of glazed sliding shutters (02 Nos) of section 44 mm x 18 mm x 1.25 mm provided with 3.50 mm thick tinted glass with suitable EPDM beading and locking clips arrangement.(d)Provn of 01 No gauzed shutter of Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm with suitable EPDM beading and locking clips arrangement. Section of shutter as per para 9 (c) above.(e)Aluminium powder coated grill of weight not less than 2.60 Kg/Sqm on external side with suitable frame/aluminium runner to be fixed on the window frame.(f) Repair to the jamb, cills and all sides around the window is incl in unit rate.The repair finishes to match the existing surfaces like tiles, plastering etc. 46 S&F factory made solid panel PVC door shutter, 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded, plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom railon either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as per specification anddrawing, complete all as specified and as directed. 47 S&F solid PVC door frames of size 50mm X 47mm made out of 5mm plain color PVC sheet reinforced with MS square tube, complete all as specified and directed. 48 S&F butt hinges, medium weight cold rolled, mild steel of size 100 mm, complete all as specified and as directed. 49 S&F, aluminium anodised, barrel tower bolts of extruded section with length of bolt 200 mm and fixed, complete all as specified and directed. 50 S&FEWC cascade with all fittings and accessories all as per manufactures instruction, complete allas specified and directed. 51 S&F extruded aluminium alloy handles, fabricated type, anodised of size 150 mm, complete all as specified and directed. 52 S&F, 250mm aluminium alloy, anodisedsliding door bolt with hasp, staple (bolt tyoe) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed 53 M&L for preparation of new painted wooden surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink prime, complete allas specified and directed. 54 M&L for preparation of new steel surfaces of any description over 10 cm width or girthand applying two coats of synthetic enamel paint over a coat of red oxide primer,complete complete allas specified and directed. 55 M & L 75 mm thick,plain cement concrete1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection / hard standing etc, finishing cement concrete surface even and smooth without using extra cement including making joints with bitumastic filing in proportion of bitumen and sand 1:2, complete allas specified and directed. 56 S & FVitreous china wash basin white flat back size 580x450 mm excluding taps waste chain and plug and porcelain stopper but including brackets including 15 mm borecentre hole mixer fixedcomplete alongwith pedestal,complete allas specified and directed. 57 S&F Vitreous China Urinal, Half stall type, white (including flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement,complete all as specified and directed. 58 S&F 600mmX450mm bevelled edge Mirror of selected quality glass, mounted on 6mm thick AC building Board or commercial plywood and fixed to wooden plug with chromiun plated brass screw and cup washer,complete allas specified and directed. 59 Supply and fixingGI water tubing 15 nmm bore medium grade galvanised with all fittings like socket, union, elbow, bend, etc. jointed and fixed to walls, ceilings or laid on floors, complete all as specified and directed. 60 Supply and fixingGI water tubing 20 nmm bore medium grade galvanised with all fittings like socket, union, elbow, bend, etc. jointed and fixed to walls, ceilings or laid on floors, complete all as specified and directed. 61 S&F 15 mm dia PVC connecting pipe 450mm long with PTMT nuts of suitable size at both ends complete all as specified and as directed. 62 S&F in 15 mm bore, Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed. 63 S&F 15mm bore, bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed. 64 S&Fbrass cromium plated tubeler towel rail 20 mm diainclding brackets,complete all as specified and directed. 65 S& F stainless steel Towel Rack of ornamental type size 500x300, complete all as specified and directed. 66 S& F Electronic hand dryer machine, complete allas specified and directed. 67 S & F CP steel grating 75/100mm dia, complete all as specified and directed. 68 S&F 1000 litres capacity rotaional moulded polythelene water storage (Three layer ) (cylindrical vertical with closed top) hoisted and fixed in positions all specified in SSR part-I,complete allas specified and directed. 69 S&F 20 mm dia PVC ball cock (PVC floatvalves) complete high pressure with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed as required to use reducer and check nut,complete allas specified and directed. 70 M&L for PVC (SWR) floor trap, 75mm dia bore plain with grating including jointing with solvent cement,complete allas specified and directed. 71 S&F forPVC (SWR) pipes 75mm dia bore single sockets, in any length with rubber ring joints, laid in trenches or floors/wall, complete allas specified and directed. 72 S&F PVC (SWR) bends 75mm dia bore,complete allas specified and directed. 73 S & F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks & similar work con-forming to Fe.290.Gde-E-165,complete allas specified and directed. 74 S & FHealth faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position,complete allas specified and directed. 75 S & F 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed,complete allas specified and directed. 76 S & F 15 mmGun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete allas specified and directed. 77 M & L for plain cement concrete 1 :3: 6 Type D2using 40 mm graded crushed stone aggregate as in bed to drain pipes 150 mm bore including packing under and haunchingagainst the sides of pipes after they are laid and tested, complete allas specified and directed. 78 M&L for 150mm bore salt glazed ware drain pipe, of Grade A laid in trenches and jointed with cement joint , complete allas specified and directed. 79 M & L PCC 1 : 2 : 4 Type B1 ( 20 mm graded aggregate) as in providing, cement concrete inlintel up to 1.5m clear span, cills, steps, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs,complete allas specified and directed. 80 M & L Precast reinforced cement concrete 1 : 2 : 4 Type B1, using 20 MM graded crushed stone aggregate, as in cover slab (for manholes etc), chajjas, mangers, shelves etc. set in cm 1 : 6 complete with joints to math. complete allas specified and directed. 81 Cutting into existing manholes 150mm dia for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required, complete allas specified and directed. 82 M/L for brick work with sub class B bricks straight or curved on plan built in cement moprtor 1:4, complete all as specified and directed. 83 M&L for plain cement concrete 1:2:4 type B2, using 40mm graded crushed stone aggregate, as in surface channels and drains, complete allas specified and directed. 84 Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends, complete all as specified and directed. 85 M&L for 15mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:4 and finished even and smooth with using extra cement, complete all as specified and directed. 86 M&L 75 mm thick plain cement concrete 1:4:8type D2 (Using 40mm graded stone aggregate) as sub base to floors,complete all as specified and directed. 87 Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete allas specified and directed. 88 Material and labor for point wiring with 1.5 Sqmm copper conductor FRLS (Stranded) PVC insulated ISI Marked unsheathed cable in and including concealed PVC conduits, medium grade, ISI marked not less than20 mm dia with all fittings/ accessories and also including PVC insulated ISI marked unsheathed 1.5 Sqmm copper multistranded conductor FRLS as earth wire connected to common earth dolly and including sunk cast iron/pressed mild steel terminal boxes, junction boxes, other boxes made from 2 mm thick mild steel sheet of suitable sizes for mounting of switches, sockets, fan regulators, light fittings etc.covered with 3mm thick plastic laminated sheet (Make Hylum or equivalent ISI marked) for One light point/fan point controlled by one way switch 5 Amps complete all as specified and directed. 89 Description complete all as per serial item No 88 here-in-before,but one light point / fan point wiring system controlled by oneway switchcomplete all as specified and directed. 90 Description ccomplete all as per serial item No 88 here-in-before, but one 5 Amp socket outlet point wiring system fixed on same board and controlled by one way switchcomplete all as specified and directed. 91 Description complete all as per serial item No 88 here-in-before, but one 5 Amp socket outlet point wiring system fixed on independent board & controlled by one way switch complete all as specified and directed. 92 Description complete all as per serial item No 88 here-in-before, but one bell point wiring system fixed on board and controlled by one way bell switchcomplete all as specified and directed. 93 Description complete all as per serial item No 88 here-in-before, butusing PVC insulated FRLS wire 1100 volt grade with multistranded copper conductor wire of size 2.5 Sq. mm (Nominal area) ISI Marked for power socket point on indenpent board point wiring systemand also providing of 2.5 sqmm PVC insulated FRLS wire 1100 volt grade ISI Marked with multistranded copper conductorwire used as a continuous earth wire for power point wiring system, complete all as specified and directed. 94 Description complete all as per serial item No 88 here-in-before, butusing single runs of PVC insulated FRLS wire ,1100 volt grade with multistranded copper conductor wire of size 4 Sq.mm (Nominal area) ISI Marked for high power wiring system with fixed on independent board and also providing of 4 sqmm PVC insulated FRLS wire 1100 volt grade ISI Markedwith multistranded copper conductorwire used as continuous earth wire, complete all as specified and directed. 95 Supply and fixing of modular type switch 5/6 Amps 220 Volts AC,one module, complete all as specified and directed. 96 SSupply and fixing of modular type socket of 5/6 Amps 220 Volts AC,3/5 multi pin type with two modular, complete all as specified and directed. 97 Supply and fixing of modular type switch of 15/16 Amps 220 Volts AC one module, complete all as specified and directed. 98 Supply and fixing of modular type socket of 15/16 Amps 220 Volts AC 5/6 multi pin type with two modular, complete all as specified and directed. 99 Supply and fixing of one/two modular type step type electronic fan regulator with having hum free step alongwith speed control know, complete all as specified and directed. 100 Supply and fixing ceiling rose three terminals type made out ofpolycarbonate , isolated body, completeall as specified and directed. 101 Supply and fixing of angular/batten type shape lamp holder with PVC/ Polycarbonate insulated body, alongwith brass adhapor and back plate for housing of bulb Including providing of LED bulb of capacity 7/9 watt warm/ white colour type, complete all as specified and directed . 102 Supply and fixing of LED tube lightfitting of 1x 20W/22W 220V AC decorative box type with driver, holder including LED tube light with having energy efficient type use in both warm/white type colourcomplete including providing of suitable type flate fexible cable for electric connection from ceiling rose to fitting comlpleteall as specified and directed . 103 Supply and fixing of LED mirror light fitting with high out put diffuuser 2 feet long of 10 Watt220 volt AC decorative type with driver holder and LED lamp with having energy efficient type use in both warm/white type colour complete light fitting set all as per existing fitting type/ size of sample /model and make and including providing of suitable type flate fexible cable for electric connection from ceiling rose to fitting and making electric connection, completeall as specified and directed. 104 S&F recessed / ceiling concealed mounted flat slim panel square shape with LED luminaire panel type fitting of size 600 mm x 600 mm of rating capacity in 35W/36/37 Watt 220 volt AC recessed type with high efficiency PMMA diffuser soft glare free light with driver, holder & LED lamps complete used for roof ceiling and required fitting use in both warm/white type colour complete setproviding of suitable type of flat flexible two/three core cable and making electric connection, complete all as specified and directed. 105 Supply and fixingrecessed/ceiling concealed mounted down lighter lightfitting of round/Square flate shapes decorative type with high efficiency PMMA fiffuser soft glare free light with drivers & LED luminaire of rating capacity in 15 Watt to 18 Watt 220 volt AC complete light fitting setand also providing of suitable type of flate fexible two/three core cable and making electric, connection,complete all as specified and directed. 106 Supply and fixing ofbldg LED street light fitting of rated capacity 20W to 25Watt 230 volt AC with having LED driver,lamp bracket with impact and corrosion resistant with lense embeded including thermal management in multiple optices complete with IP 65/66 protectiuon suitable for out door type made out of high pressure die cast hosing with heat resistant glass complete including providing of suitable size of dia GI pipe light grade bracket and it to match/setting the new fitting fixture hole attechment system of suitable bracket length upto 1.2 mtr long and make to shape / bendof 120 degree angle including duly fixed alongwith existing pole /bldg wall/ roof with the help of 02 Nos ofMS fixing clamp alongwith nut bolt and including providing of suitable type of flate fexible two/three core cable and making electric connection, completeall as specified and directed. 107 Supply and fixing of sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrengment system suitable of size/typefor vertical type distribution boardvertical loadline type of rating VTPN 4 way type 415 volt3 phase AC supply holding system with IP protection rating with ISI marked and having fitted neutral and earth link bus bar and mounting base chanels and blanking plates suitable for holding of main MCCB as incommer and out going MCB complete system alongwith providing and mounting in side of DB box of 01 No of MCCB TP160 Amps with breaking rupting capacity 25 KA and having adjustable setting type and also providing of 12 Nos of MCB SP 63 Amps 10KA C curve type of the same manufacture make as per of distribution board make complete set and including dully fixed surface on wall or concealed in wall and making all necessary electricalconnectioncomplete all as specified and directed. 108 Supply and fixing of sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrengment system suitable ofsize/type of distribution board of rating SPN 8 way type 220 volt AC supply systemwith IP protection rating with ISI marked and having neutral and earth link bus bar and mounting base chanel suitable for holding MCBs incommer andoutgoingsystem complete set and including dully fixed surface on wall or concealed in wall and making all necessary electrical,complete all as specified and directed. 109 Supply and fixing of MCB SPN 40 to 63 Amps with breaking capacity 10KA C Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring coneenection, complete all as specified and directed. 110 Supply and fixing of MCB SP 40 to 63 Amps with breaking capacity 10KA C Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring coneenection, complete all as specified and directed. 111 Supply and fixing of MCB SP 06 to 32 Amps with breaking capacity 10KA C Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring coneenection, complete all as specified and directed. 112 Supply and fixing of Sub main wiring system with two runs PVC insulated FRLS wire,1100 volt grade with multistranded copper conductor wire of size2 Run of 10 Sqmm and 1 Run of 10 Sqmm (Nominal area) (ISI Marked) any type any length drawn through in heavy dutyISI markPVC Casing capping / PVC conduit of suitable size along with its all fittingsand connected accessories and duly fixed concealed on wall or surface on wallmaking good all disturbed surfaces match to the existing surface complete all as specified and directed .Note: 3 runs of 10 Square mm cable and 1 run of PVC casing caping / PVCconduit with accessories shall be measured as 1 unit of running metre. 113 Supply and fixing of Sub main wiring system with two runs PVC insulated FRLS wire,1100 volt grade with multistranded copper conductor wire of size2 Run of 6 Sqmm and 1 Run of 6 Sqmm (Nominal area) (ISI Marked) any type any length drawn through in heavy dutyISI markPVC Casing capping / PVC conduit of suitable size along with its all fittingsand connected accessories and duly fixed concealed on wall or surface on wall and making good all disturbed surfaces match to the existing surface complete all as specified and directed.Note: 3 runs of 6 Square mm cable and 1 run of PVC casing caping / PVCconduit with accessories shall be measured as 1 unit of running metre. 114 S&F star rated electric ceiling fan 1200mm sweep min air delivery 210 CFM with service value 6.0 BEE norms 5 star rating with bruhless direct current motor (BLDC)of single phase 230 volt AC alongwith blade, down rod, canopy, clamps with reel insulator, electronic regulator & accessories and MS fan hook fixed in ceiling/roof including providig flate flexible copper wire and making all electricalconnection, complete all as specified and directed. 115 Supply fixing and comissiong and testing of star rated of electric ventilation exhaust fan of size 300mm sweep complete AC single phase 230 volt and made out of sturdy engineering plastic body complete with blade and louvers with shutter and also providing or making of suitable type/size of hole on wall out of any type of wall constraction work for installation /fixing of exhaust fan after fan fixing work making good to all diturbed hole surface area of wall/ceiling and floor area of hole system and to match/dressing to it as per the existing surface os wall/floor/ceiling etc by cement plastering work, complete all as specified and directed. 116 Supplying and fixingof flexible type round PVC bedded with PVC insulated and sheathed with multi FRLS cable of 1100 volt grade with multistranded copper conductor wire of size 1.5 Sq.mm 5 core type (Nominal area) ISI Marked, complete all as specified anddirected 117 Supply and fixing ofrigid non metalic PVC conduit of size 20 mm bore heavy duty with all fitting laid in trenches/ wall including providing clamping arrangment for holding of pipe on wall inproper size of clamps, nut bolt ,and washer etc complete all as specified.and directed 118 Supply and fixing in decorative wall mounting brushed nickle finish fixture with double opal glass difuser suitable for one Nos for green and one Numbers for red indication bulb B22 typecomplete fittings all as specified and directed. 119 S&Fclassy design for focusing hanging /pandantlightsmade of aluminium mild steel suitable for including 7/9 Watt Led rechargeablebulb, complete all as specified and directed. 120 Supply , fixing / laying in trenches/on wall/under path / road etc galvanised iron pipe of size 25 mm dia meidum class including all fitting with ISI marked including necessary fittings (Excavation / earthwork for pipe line joints, andshall be measured and paid for separately), complete all as specified and directed. 121 Supply and fixing brass gate /GM globe valve 25 mm dia bore with iron wheel head comlete in replacement for spigot/socket edns for GI pipe including cutting of pipes and insertion of union ISI marked complete all as specified and directed. 122 Cutting existing pipe upto 80 mm pipe line and connecting with 25 m dia pipe including fittings such as Tee, Bends, Reducer, tail pipe, socket, nut, bolt, rubber sheet gasket etc, complete all as specified and directed. 123 Supply, laying and testing ofLT cable XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty)with aluminium conductor 1100 volt gradecross sectional area of size 35 sqmm 3.5 core including laid in trenches or fixing on poles or passing through pipes complete, complete all as specified and directed. 124 M&L of Locally available river sand filling in trenches below and above / around UG cable for cable protection, in duct under and above the cables including punning around cable complete all as specified and directed.Note - Punned thickness shall only be measured and paid. 125 Supply and laying un-reinforced precast PCC cable Cover ISI marked, class LV, type-1, flat, size 250mm x 150mm x 40mm for covering cables laid dry flat as cable protection on sand, complete all as specified and directed. 126 S&F galvanised steel tubing, light grade, ISI marked, for protection of under ground cable on pole/wall/under road including taking out old unserviceable pipe 40 mm bore, complete all as specified and directed. 127 M&L for earthing work complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm thick buried directly in ground vertically to a depth not less than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level and connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers of galvanised steel and to be protected by GI pipe 15 mm bore light grade & connected to earth test point/main switch board or main control board and also providing charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soilall as shown in Electrical Plate No 3 of SSR part -I. and also making arrangment of20 mm dia bore galvanised iron pipe (medium grade) for water and making funnel, wire mesh,and also including provision of concrete pit cover framing work in PCC (1:2:4) type B-1 using 20mm graded of stone aggregate with XPM (weight not less than 4 Kg/Sqm) and outer frame work of angle iron 25x25x6mm with top concrete pit cover and handle for lifting of cover complete all as specified and directed. 128 Supply, fixing, commissioning and testing of 3 star rated wall mounted split AC, dual invertor based with cooling and heating function and digital inverter type complete set of hi wall split type indoor and outdoor complete set of air conditioner unit with cardless remote control and full filling of initial refrigent gas alongwith having inbuilt heating and cooling arrangement and digital inverter twin rotary type compressor suitable for AC of rating capacity 1.5 TR and suitable for operation of 230Volt 50Hz single phase electric supply including provn of MS stand & bracket for fixing of outdoor and indoor unit system and also providing of both type /size sunction and discharge coper refrigerant piping attachment system of any length and duly both connected it from outdoor unit to indoor unit system alongwith duly overlapped it by nitrile insulation, with insulation taping work and suitable drain pipe line system upto ground level for dropping out the water outside from evaporator unit and making electric connection with three core copper cable of suitable size and making hole on wall / roof and making good all disturbed surface as per existing,complete all as specified and directed. 129 Description all as per serial item No 124 here-in-before, but of capacity 2 TR,complete all as specified and directed. 130 Supply, fixing, commissioning and testing of wall mounting hanging based automatic digital operation based voltage stabilizer with copper winding based unit of single phase naturally air cooled indoor type with having digital display and suitable for operation on single phase AC supply and with having designed voltage for input & output voltage 90 volt to 230 volt with accuracy +2.5% and having low and high voltage cut low voltage cut off 90 (-) 5 volts high voltage cut off 230 V (+5) Volts along with start time delay system with time delay adjustable from 30 second to 1.5 minutes system complete unit set of rating capacity 5 KVA, complete system all as specified and directed. 131 S&F sheet metal enclosure duly powder coated with single pole and neural enclosure with having a two pin and earth plug & top and mounting channel alongwith one 01 MCB SP 20 Amp and dully fixed surface on wall or concealed in wall and making all necessary electrical connection, complete all as specified and directed. 132 Supply, installation, Testing & Commissioning ofElectric storage water heater (vertical type) 25 litres, with porcelain enamel glass lined inner tank 230 V, AC, Single phase, IS 2082 Marked, 5 Star rating, with 15mm brass non return valve and including connecting fasteners not less than 100 mm with suitable nut, bolt & washers grouted in walls with complete masonry work for proper mounting of Geyser fastenings bolts etc as directed as site reqmt and making necessary inlet and outlet water & electric connection tested on load including provision of PVC insulated & PVC sheathed copper conductor cable 2.5 sqmm 3 core upto 15 Amp plug point, complete all as specified and directed. 133 Supply and fixing of sheet metal enclosure duly powder coated with single pole and neural enclosure with having a two pin and earth plug & top and mounting chanel alongwith one 01 MCB SP 20 Amp and dully fixed surface on wall or concealed in wall and making all necessary electrical connection,complete all as specified and directed

BRR:8660152 Supply Of Supply Of Overhualing Kit For 54 Month Of Compressor Type Trc-1000 Dcm To M/S Elgi Part No. 072495129 Consisting 61 Items As Per Annexure.Supply Of Overhualing Kit For 54 Month Of Compressor Type Trc-1000 Dcm To M/S Elgi Part No. 072495129 Consisting 61 Items As Per Annexure.,Supply Of Overhualing Kit For 54 Month Of Compressor Type Trc-1000 Dcm To M/S Elgi Part No. 072495129 Consisting 61 Items As Per Annexure. [ Warranty Period: 30 Months After The Date Of Delivery ] ]

BRR:8660069 Supply Of Kit For D2 Relay Valvekit For D2 Relay Valve,Kit For D2 Relay Valve To Ftrtipl Pt. No. 790 0181 05 Consist Of 10 Items 13 Nos. As Under: (1) Valv E Stem Assembly As Per Ftrtipl Pt. No. 019101000,Qty-01 No. (2) Seal As Per Ftrtipl Pt. No. 004701000A,Qiy-01 No . (3) Joint As Per Ftrtipl Pt. No. 003704500,Qty-01 No. (4) O Ring As Per Ftrtipl Pt. No. 018701000A,Qty-01 No. (5) Gasket As Per Ftrtipl Pt. No. 018705500, Qty-01 No. (6) O Ring 018701500A,Qty-01 No. (7) O Ring 016706000A,Qiy- 01 No. (8) Gasket As Per Ftrtipl Pt. No. 018705000,Qty-02 No. (9) Diaphragm As Per Ftrtipl Pt. No. 012701500,Qty -02 No. (10) Seal As Per Ftrtipl Pt. No. 018702000,Qty-02 No. ( This Is Shelf Life Item And Should Be Procured With St Aggered Delivery Period. Supplier To Mention /Print Date Of Manufacturing On The Item & Item To Be Supplied Within 1 80 Days Of Manufacture Date.) [ Warranty Period: 30 Months After The Date Of Delivery ] ]

BRR:8659978 Supply Of Supply Of Spares And Servicing Of Air Compressorsupply Of Spares And Servicing Of Air Compressor,Supply Of Spares And Servicing Of Air Compressor-Kirloskar Make (120 Cfm) As Per Attached A Nnexure. Authorised Dealership Certificate Or Proof Of Purchase From Oem Shall Be Submitted Along With Ten Der Note: Servicing Of Air Compressor Is Also A Part Of The Scope Of Supplier. [ Warranty Period: 30 Months After The Date Of Delivery ] ]

BRR:8659907 Supply Of Overhauling Kit For Auxiliary Compressoroverhauling Kit For Auxiliary Compressor,Overhauling Kit For Auxiliary Compressor Type Crc150 To Elgi Part No. 072496469 Consisting Of 1 2 Items As Per Document Attached [ Warranty Period: 30 Months After The Date Of Delivery ] ]

BRR:8659857 Supply Of Set Of Spares For C2 Relay Valve , Rdso Specification No. Mp.0.01.00.15 Rev- 03 April - 2024, Rdso Drawing: Skdp-4160. Each Set Consisting Of 11 Items As Follows: S.No. Description Wabco Pt.No. Ftrtil Pt Nno Qty/Set 1 Ring Retaining 558938 915009500 1 No. 2 Ring Retaining 540570 915009100 1 No. 3 Ring Retaining 850021 505805000 1 No. 4 Ring Retaining 536868 505811000 2 Nos. 5 Supply Valve Spring 562292 505804000 1 No. 6 Spring 562295 506806000 1 No 7 Strainer 527583 508407000 4 Nos. 8 Retaining Ring 529161 508808000 1 No. 9 Screw Clamping 562299 505815000 3 Nos. 10 Nut Hex. 17152 906013500 3 Nos. 11 Spring Diaphragm Stem 562294 505807000 1 No.Set Of Spares For C2 Relay Valve , Rdso Specification No. Mp.0.01.00.15 Rev- 03 April - 2024, Rdso Drawing: Skdp-4160. Each Set Consisting Of 11 Items As Follows: S.No. Description Wabco Pt.No. Ftrtil Pt Nno Qty/Set 1 Ring Retaining 558938 915009500 1 No. 2 Ring Retaining 540570 915009100 1 No. 3 Ring Retaining 850021 505805000 1 No. 4 Ring Retaining 536868 505811000 2 Nos. 5 Supply Valve Spring 562292 505804000 1 No. 6 Spring 562295 506806000 1 No 7 Strainer 527583 508407000 4 Nos. 8 Retaining Ring 529161 508808000 1 No. 9 Screw Clamping 562299 505815000 3 Nos. 10 Nut Hex. 17152 906013500 3 Nos. 11 Spring Diaphragm Stem 562294 505807000 1 No.,Set Of Spares For C2 Relay Valve , Rdso Specification No. Mp.0.01.00.15 Rev- 03 April - 2024, Rdso Drawing: Skdp-4160. Each Set Consisting Of 11 Items As Follows: S.No. Description Wabco Pt.No. Ftrtil Pt Nno Qty/Set 1 Ring Retaining 558938 915009500 1 No. 2 Ring Retaining 540570 9150 09100 1 No. 3 Ring Retaining 850021 505805000 1 No. 4 Ring Retaining 536868 505811000 2 Nos. 5 Supply Valve Spring 562292 505804000 1 No. 6 Spring 562295 506806000 1 No 7 Strainer 527583 50 8407000 4 Nos. 8 Retaining Ring 529161 508808000 1 No. 9 Screw Clamping 562299 505815000 3 N Os. 10 Nut Hex. 17152 906013500 3 Nos. 11 Spring Diaphragm Stem 562294 505807000 1 No. [ Warr Anty Period: 30 Months After The Date Of Delivery ] [Quantity Tolerance (+/-): 5 %Age , Item Category : Normal , Total Po Value Variation Permitt Ed: Max 8 Lacs ] ] Diesel Stores Andhra Pradesh 41.00 Set

BRR:8659315 Supply Of Stethoscope Having Ear Piece, Rubber Tube Connecting To Chest Piece (Chest Piece Should Have Bell And Diaphragm) (Adult Size) As Per Technical Specification Attachedstethoscope Having Ear Piece, Rubber Tube Connecting To Chest Piece (Chest Piece Should Have Bell And Diaphragm) (Adult Size) As Per Technical Specification Attached,Stethoscope Having Ear Piece, Rubber Tube Connecting To Chest Piece (Chest Piece Should Ha Ve Bell And Diaphragm) (Adult Size) As Per Technical Specification Attached ]

BRR:8659105 Supply Of Aoh Kit For Compressor Model : Rr1750, Kit Code No.Sspk1616. .Aoh Kit For Compressor Model : Rr1750, Kit Code No.Sspk1616. .,Aoh Kit For Compressor Model : Rr1750, Kit Code No.Sspk1616. One Kit Consis Ting Of 20 Items 43 Nos. As Per Annexure Attached [ Warranty Period: 30 Months After The Da Te Of Delivery ] [Quantity Tolerance (+/-): 5 %Age , Item Category : Normal , Total Po Value Variation Permitt Ed: Max 8 Lacs ] ]

BRR:8658942 Supply Of Set Of Following Spares Of Rotomag Make Motor For Elgi Aux Compressorset Of Following Spares Of Rotomag Make Motor For Elgi Aux Compressor,Set Of Following Spares Of Rotomag Make Motor For Elgi Aux Compressor Rocker Ring Set. 1) Rocker Ring M/S- Rotom Ag Part No. 4-598-Rr-V-857 Qty-01 No. 2) Rocker Ring Bush M/S- Rotomag Part No. 4-1995-Msc-El-2936 Qty-01 No., 3) Brush Hold Er Spring Type-10 X 18- Rh (M/S- Rotomag Part No. 4-671-Bh-10X18-962) Qty-02 Nos. 4) Brush Holder-Spring Type-10X18-Lh(M/S- Rotomag Part No.4-671-Bh-10 X18-961) Qty-02 Nos., 5) Carbon Brush (M/S- Rotomag Part No. 4-1038-Brenr-1530) Qty- 04 Nos. Make-Rotomag. [ Warranty Period: 30 Months After The Date Of Delivery ] [Quantity Tolerance (+/-): 5 %Age , Item Category : Normal , Total Po Value Variation Permitted: Max 8 Lacs ] ]

BRR:8658757 Supply Of Flexible Delivery Hose For Auxiliary Compressor.Flexible Delivery Hose For Auxiliary Compressor.,Flexible Delivery Hose For Auxiliary Compressor (1/2 Inch) Id Sae 100 R2, Wp275 Bar. As Per Drawing No. Tata/Rs/Misc/35/10 Or Latest. [ Warranty Period: 30 Months After The Date Of Delive Ry ] [Quantity Tolerance (+/-): 5 %Age , Item Category : Normal , Total Po Value Variation Permitt Ed: Max 8 Lacs ] ]

BRR:8658702 Procurement Of Transmitters , Typehigh Performance Smart Line – Differential Pressure Transmitters With Remote Diaphragm Seal Unit.(Extended Diaphragm) For Full Technical Specificationsrefer “Annexure – 2” , Type High Performance Smart Line – Differential Pressure Transmitters With Remote Diaphragm Seal Unit.(Extended Diaphragm) For Full Technical Specificationsrefer “Annexure – 2”

BRR:8658283 Tender for Repair And Maintenance Of Municipal Submersible Motor Pump Set Monoblock Motor And Air Compressor Motor With Pump Set Ward No To In Vellakovil Municipality

BRR:8658279 Tender for Supply, Erection Of Air Compressor At Ward No.1 Vaiyapuri Nagar, Ward No.2 Kallankattuvalasu, Ward No.4 Mgr Nagar And Ward No.4 Arivozhi Nagar 3Rd Cross Street In Vellakovil Municipality

BRR:8658112 Tender For Sanapadar To Rasola Road; 1 Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of grith upto 300mm removal of stumps of such trees cut earlier and disposal of unserviceable materials by manual means andstacking of serviceable materials to be used or auctioned upto a lead of 1000m incuding removal and disposal of top organic soil not exceeding 150mm in thickness as per direction of Engineer-in-charge. 2 Providing 37.5mm thick BUSG in one layers applying tack coat using 3.0 kg of bitumen /10 sqm, using 0.45 cum of25mm to 40mm size H.G. metal& 0.12 cum of 12mm size h.g. chips for 10 sqm . etc. complete as per direction of Engineer-in-charge. 3 Providing & applying tack coat over the bituminous surface with bitumen boiler fitted with spray set using 0.20Kg / Sqm. area including clearing the surface etc. complete for finished item of work induding cost, conveyance, royalty, taxes, labour, T&P, all other matermls required for the work etc. complete as per direction of the Engineer-incharge. 4 Providing and laying 20 mm thick premix carpet using 0.18 cum of 13.2 mm and 0.09 cum of 11.2 mm size chips with 14.60 kg. penetration grade of bitumen per 10 sqm including hand packing to proper camber and rolling with PRR including hire and running charges of PRR, tar boiler and other T&P articles including all cost, carriage, royality of chips and bitumen etc. (With H.M.plant) as per direction of the Engineer-incharge. 5 Providing and laying 6 mm thick precoated seal coat Type - B using 0.06 cum of 6.7 mm size chips and down graded as per sieve analysis and 6.8 kg. of bitumen per 10 sqm including hire and running charges of PRR, bitumen mixture, tar boiler etcincluding all cost, carriage, royality of chips and bitumen etc.(With H.M.plant) as per direction of the Engineer-incharge. 6 Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement,thickness as per design, over a prepared sub-base, with 43 grade cement of any other type as per Clause 1501.2.2 M-30 (Grade), coarse and fine aggregate not exceeding 25mm mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design,laid in approved fixed side formwork (steel channel, laying and fixing of 125micron thick polythene film,wedges,steel plates including levelling the form work as per drawing), spreading the concrete with shovel,rakes,compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contaction and expansion, construction joints, applying debonding strips, primer, sealant,dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved,curing of concrete slabs for 14-days, curing compound (where Spefied) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 as per direction of the Engineer-incharge 7 Providing & laying good laterite moorum for filling road flanks including cost and conveyance of all materials to site, and all labour charges complete as per direction of E.I.C.

BRR:8657916 Tender For Special repair Work Of Gram Gadhi Me Atayer Goan Prathamik Pathsala Link Road In Distt Gorakhpur In Fy 2025 -26 - WBM G-3Providing and laying spreading and compacting stone aggregates of specific sizes to water bound macadam specification incluidng spreading in uniform thickness hand packing rolling with smooth wheel roller 80-100 KN in stages to proper grade and camber applying and brooming stone screening to fill-up the interstices of coarse aggregate watering and compacting to the required dencity as per MORD technical specification clause 405 2 Construction of un-reinforced,plain cement concrete pavement thickness 150mm, over a prepared sub base with 43 grade cement or any other type as per clause 1501.2.2 M 30 (Grade), coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batch using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including leveling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted usingplate vibrators and finshed in continous operation including provision of contraction, expansion, joints, joint filler, separation membrane, bitumenous sealant, joint sealant.In proper lines and grades as per drawing and Technical Specification Clause 1501 including proper curing. 3 Earth work in cutting or in embankment in ordinary soil, excavation to be in the form of regular pits not exceeding 0.5m in depth and earthwork in embankment to be in 20cm. layers, including ramming and dessing the surface to required levels & slopes & also including 1.5m. lift & 30m. lead. The earth from cutting to be used in making embankment or to be deposited as spoil banks within 30m. Distance as directed by the engineer-in-charge. (Excluding Royalty).

BRR:8657581 Tender For Special Repair To Road From Nair Gate To Div Rear Gate At Rajouri Under Ge 862 Ews; 1 Scarifying or picking up gravelled macadam or bituminous macadam surfaces area exc. 400 Sqm and depth exc. 50mm but not exc. 100mm deep, completeall as specified & directed. 2 Rolling and consolidating formation surfaces in cutting and scarifying part with 08 to 12 tonne power roller complete to required level, gradient, slop, camber, super elevation including filling depression and including approved earth which may occur during rolling process all as specified and directed. 3 75 mm thick (compacted thickness) WBM, with coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber required using Granite, trap or basalt and rolled with 10 to 12 tonnes power roller, each layer will be consolidated separately and to required gradient and camber, complete all as specified. 4 Preparing water bound macadom surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with power sweeper or compressor to remove all loose dirt etc., applying evenly a priming/ tack coat with bituminous primer using paving bitumenat 10 kg per 10 sq metre of road surface Complete all as specified and as directed. 5 Bituminous premix semi-dense asphaltic concrete 40 mm consolidated thickness using paving bitumen VG-30 wiith 5.5% binder content by weight of total mix rolled and compacted to required camber and gradient complete and rolled with 8 to 10 tonne power roller complete all as specified and directed.Note:- (I) In case the binder contents by weight of total mix is less than 5.5% as per per actual design mix, The prices adjustment shall be made as per average rates of all paid voucher for bitumen pertaining to this work. if the total binder contents as per design mix is more than 5.5% no prices adjustment shall be made for the same. (II) Job mix formula for Semi Dense asphaltic concrete shall be obtained from the institutions specified in CA prior to commencement of work and shall be got approved from the GE.(iii) The Contractor shall submit certificate issued to Hot mix plant that plant is SDAC compliant before incorporating workat site. The Hot Mix plant visit has to be organized by Contractor for approval of GE.(iv) The plant shall be automatic type which must have facility to print the details of composition of material incorporated with all batches of SDAC. 6 Providing premix bituminous macadam with 4% bitumen binder by weight of total mix laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) (paving bitumen VG-30) by weight of total mix spread, rolled and consolidated with 8 to 12 tonne power roller to required gradient and camber complete all as specified and directed.Note:- (I) In case the binder contents by weight of total mix is less than 4% as per per actual design mix, The prices adjustment shall be made as per average rates of all paid voucher for bitumen pertaining to this work. if the total binder contents as per design mix is more than 4% no prices adjustment shall be made for the same. (II) Job mix formula for bituminous macadam shall be obtained from the institutions specified in CA prior to commencement of work and shall be got approved from the GE.(iii) The Contractor shall submit certificate issued to Hot mix plant that plant is SDAC compliant before incorporating workat site. The Hot Mix plant visit has to be organized by Contractor for approval of GE.(iv) The plant shall be automatic type which must have facility to print the details of composition of material incorporated with all batches of SDAC. 7 Applying evenly a priming/ tack coat with bituminous primer using paving bitumenat 05 kg per 10 sq metre on top of bitumenus macadam for reciving bituminous carpet, complete all as specified and as directed. 8 M&L for preparing bituminous surfaces of road and making 2.5mm thick centre lines, stop lines, dashes, arrows etc, and the like not exceedingthan 10cm wideon roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with specifal applicator machine all as per manufacturers instruction including cleaning the surface by removing all dirt, dust & all other forein matters, demarcation at site and traffic control, complete all as specified and directed. 9 Supply and fix in repairsolar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc ,.includingall as specified anddirected 10 Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions. including removal of old cat eye ,complete all as specified and directed. 11 Supply and fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1,including removal of old unservicable complete all as specified and directed 12 Dual Directional Speed Breaker having high intensity cube corner refector ultra sonic welded to high impact resitant radious plaster body of colour yellow and block of size 250 x 345 x 50 mm high provided with 120 mm for fixing to row by hammering shape of side body to have interlocking pattern to all speed breaker in a row, including removal of unservicable speed Braker, complete all as specified and as directed. 13 S & Fin replacement of Road safety covex mirror of high quality dia 60 cm convex mirror polycarbonate reflected mirror AMS/fiber/plasticMade up of polycarbonate Reflective Mirror Body is made of ABS/Fiber/ Plastic Suitable for indoor/Outdoor use with hood complete with mounting hardware complete all as specified & directed. 14 Manufacturing, supplying and fixing in replacement ofRetro reflective regulatory sign board of size 900 mmdia meter made out of 2 mm thick aluminiumsheet, face to be fully covered with high intensityencapsulated lens type retro -reflective sheetingas approved by Engineer-in-charge . Letter, symbols, borders etc. will be as per IRC - 67 withrequired colour scheme on the boards and withthe high intensity grade A. The aluminium sheetto be riveted to M.S. frame of angle iron of size40x40x4 mm. The boards will be fixed to 1 No. 50x50 mm square post made of M.S. angle 50x50x4 mm, 4 m long welded to the frame with adequateanti-theft arrangement .Sheet work to be paintedwith two or more coats of synthetic enamel paintover an under coat (primer) and back side ofaluminium sheet to be painted with two or morecoats of epoxy paint including appropriatepriming coatand erection of fabricated sign board in PCC bed block of size 0.45x0.45x0.6m (using PCC 1:3:6 Type C2) including necessary earth work complete in all respectsas perdirection of Engineer-in-charge. 15 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm),including demolition of old kerb stones and removing debries and making good surface anddrainage opening wherever requiredcomplete as per direction of Engineer-in-charge ( Length of finished kerb edging shall be measured for payment) 16 Deduct Credit Amount as per Schedule of credit as details given on Srl Page No 19 of tender doucments.

BRR:8656823 Bids Are invited for Distributor Head - Tata 2.5Ton , Roller - Tata 2.5Ton , Vane Pump - Tata 2.5Ton , Solenoid - Tata 2.5Ton , Camplate - Tata 2.5Ton , Injection Nozzle - Tata 2.5Ton , Graduated Hand Brake Valve - Tata 2.5Ton , Repair Kit Air Dryer - Tata 2.5Ton , Major Repair Kit Air Compressor - Tata 2.5Ton Total Quantity : 17

BRR:8656714 Bids Are invited for Engine Housing - Nk , Crank Shaft - Nk , Cam Shaft Assy - Nk , Governor Assy - Nk , Connecting Rod - Nk , Piston Assy - Nk , Piston Ring - Nk , Bearing - Nk , Crank Shaft Seal - Nk , Valve Lock - Nk Total Quantity : 11

BRR:8656686 Bids Are invited for Bearing Block , Hose , Hose Assy Air Filter Outlet , Senosor Assy , Assy Rubber Bush Frt , Assy Rubber Bush Rear , Brake Hose , Fuel Pre Filter Assy 2Pin , Qs 90 Compressor Dia For Euro , Suspention Bush Kit , Iol Filter Total Quantity : 11

BRR:8656680 Bids Are invited for Large Chandelier Ceiling Led Light , Metal Floor Lamp With 3 Shelves With Led Bulb , Basin Mixer Ptmt For Hot And Cold Water , Insulation Foam For Water Pipe 7 Ft L X 1 Inch Dia , Refrigerator 4 Star 192 Ltr 4 Star With 10 Year Warranty For Inverter Compressor Total Quantity : 69

BRR:8656559 Tender For Special Repair Work Of Karahiya Link Road - 3)WBM Grading 3Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.(A)By Manual Means 2 Item Name :- Cement Concrete PavementConstruction ofun-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than0.2 cum capacity and appropriate weigh batcher using approved mix design,laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixture 3 Item Name :- Construction of Subgrade and Earthen ShouldersConstruction of subgrade and earthen shoulders with approved material obtained from R.O.W. with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2as per Technical Specification Clause 303.1.

BRR:8655888 Bids Are invited for 004007192041Ost10098080ld - Ring , 004007192041Ost10098080ld - Ring , 006009192041Ost10098080ld - Ring , 006009192041Ost10098080ld - Ring , 009013252041Ost10098080ld - Ring , 009013252041Ost10098080ld - Ring , 048052192041Ost10098080ld - Ring , 048052192041Ost10098080ld - Ring , 062068362040Ost10098080ld - Ring , 160165362040Ost10098080ld - Ring , 195205582040Ost10098080ld - Ring , 9V7010628ld - Diaphragm , 9V7010628ld - Diaphragm , 9G8684032ld - Ring , 9G8684032ld - Ring , 9V7010738ld - Diaphragm , 9V7141119ld - Valve Pad , 9V7141119ld - Valve Pad , 9V8684120ld - Ring , 9V8684120ld - Ring , 9V8684227tld - Ring Total Quantity : 2279

BRR:8655295 Bids Are invited for Passenger Drive Fan 24V , Sleeve Rubber , Connector Rack And Pannel , Tape Insulation , Araldite , Anabond , Adh-Sealent Silicone Clear , Cable Power Elect , Connector , Piston Ring Set , Circlip Fuel Needle , Wire Copper Insulator , Switch Rotary 2 Pole , Socket 6 Pin Total Quantity : 162

BRR:8655278 Bids Are Invited For Custom Bid For Services - Repair Of Compressor Of Compact Dental Chair , Custom Bid For Services - Repair Of Pcb Dental Chair Compact Complete Suzinova

BRR:8655202 Bids Are invited for Nk10010 Solenoid Switch , 15460-12170 Element Filter , 07114-00508 Hose Assy , 30Z1100029 Head Gasket , 33Z3100016 Piston Ring Assy Total Quantity : 6

BRR:8655151 Bids Are invited for Oil Filter - 11 Kva Generator , Fuel Filter - 11 Kva Generator , Fuel Feed Pump Assy - 11 Kva Generator , Injector Assy - 11 Kva Generator , Air Cleaner - 11 Kva Generator , Fan Belt Fan A - 11 Kva Generator , Piston Assy - 11 Kva Generator , Piston Ring Set - 11 Kva Generator , Piston Pin - 11 Kva Generator , Gasket Set Comp - 11 Kva Generator , Big End Brg - 11 Kva Generator , Cylinder Liner - 11 Kva Generator , Fuel Flexible Pipe - 11 Kva Generator Total Quantity : 31

BRR:8655142 Bids Are invited for Lub Oil Filter Assy - 5.5 Kva Generator , Fuel Filter Element - 5.5 Kva Generator , Fuel Pump Assy Single Type - 5.5 Kva Generator , Injector Assy - 5.5 Kva Generator , Piston Assy - 5.5 Kva Generator , Piston Ring - 5.5 Kva Generator , Big End Brg - 5.5 Kva Generator , Gasket Set Comp - 5.5 Kva Generator , Sleeve Assy - 5.5 Kva Generator , Fuel Flexible Pipe - 5.5 Kva Generator , Avr Assy - 5.5 Kva Generator , Armature Assy - 5.5 Kva Generator , Avr Assy - 11 Kva Generator , Stopper Solenoid - 11 Kva Generator Total Quantity : 21

BRR:8655112 Bids Are invited for Copper Washer 17 No , Copper Washer 19 Mm , Cable Stopper , Fuel Pump , Connecting Rod , Piston Ring Set , Nozzle Total Quantity : 15

BRR:8655109 Bids Are invited for Set Of Piston Ring Std , Set Of Connecting Rod Brg , Guide Valve Stem Inlet , Cabin Mounting Pad , Orange Beacon Light , Combination Switch , Lined Shoe Assy , Mls Gasket , Pressure Plate , Self Starter , Spring Brake Actuator , Armature , Transfer Case Mounting Bracket - T/Case Mounting Bracket , Flexible Bush For Mtg Bkt Total Quantity : 27

BRR:8655107 Bids Are invited for Lv7 Tata Part No 2505 2630 3104 Brg Taper Roller , Lv7 Stln Part No Nk000071 Self Bush Set , Lv7 Tmb Part No 2751 1540 9917 Bush Set Insul Brush , Lv7 Stln Part No Nk000880 Driven Pinion , Lv7 Re Part No 2910 008355 Carburetor Bs 29 , Lv7 Storme Part No Nk000978 Ac Compressor Belt , Lv7 Storme Part No 278909110143 Fuel Pre Filter Assy , Lv7 Storme Part No 278909130106 Air Filter Element , Lv7 Storme Part No 278923116307 Alternator Belt , Lv7 Storme Part No Nk0001317 Tail Lamp , Lv7 Storme Part No Nk001098 Bamper Fornt , Lv7 Storme Part No Nk001101 Injector Assy Total Quantity : 24

BRR:8655101 Bids Are invited for Lloyd Refrigerator - Frost Free And Direct Cool 250 To 350L 3 To 4 Star Inverter Compressor , Haier Refrigerator - Frost Free And Direct Cool 250 To 350L 3 To 4 Star Inverter Compressor , Toaster - Pop Up Toaster Auto Cut Off Crumb Tray , Solo Microwave Oven 1Fb - 20 To 25L Capacity Solo Type And Digital Control , Pressure Cooker 3 Ltr - Aluminium Or Stainless Steel And Induction Compatible , Prestige Electric Kettle - Auto Shut Off And Stainless Steel Body , Prestige Hose Pipe - Flexible Pvc Hose Leakproof Connectors , Prestige Lighter Knife Combination - Stainless Steel Knife And Gas Lighter Ergonomic Handle , Usha Mixer Grinder 500W - 500W Motor Stainless Steel Blades Overload Protection , Plastic Dustbin Square 10 Ltr - 10L Capacity Durable Plastic Swing Open Lid , Bucket Printed 20 Ltr - 20L Capacity Heavy Duty Plastic Printed Finish , Bathroom Mug 1 Ltr - 1L Capacity Plastic Body , Soap Case Grey - Plastic Soap Dish Grey Colour , Plastic Soap Case - Plastic Material Ventilated Base Standard Size , Plastic Lovely Soap Case - Decorative Plastic Soap Case , Double Mesh Strainer - Stainless Steel Double Mesh Heat Resistant , Belan - Wooden Marble Finish , Marble Chakla - Natural Marble Polished Surface , Iron Tawa - Cast Iron , Sauce Pan - Stainless Steel Lid Included , Big Tuff Bath Stool Blue - Heavy Duty Plastic Blue Colour , Bucket 25 Ltr - 25 L Capacity Thick Plastic Strong Handle , Plastic Dustbin Square 10 Ltr - 10L Capacity Plastic Body Square Design , Bath Mug 1.5 Ltr - Capacity As Mentioned Plastic Sturdy Handle , Container 3 Pc Set - Food Grade Plastic Airtight Lids Assorted Sizes , Laundry Basket Grey - Plastic Laundry Basket And Ventilated Design , Honey Comb Laundry Basket Blue - Honeycomb Design Plastic Blue Colour , Laundry Basket - Plastic Material Ventilated Medium Capacity , 3 Pc Knife Set - Stainless Steel Blades Ergonomic Handles 3 Sizes , Plasting Chopping Board - Knife Safe Surface Anti Skid , Plastic Container 2 Pc Set

BRR:8655099 Bids Are invited for Bracket Seal , Sealing Ring , Piston Guide Ring , Spring , Hose Pipe , Valve , Hose Connection , Anti Vibration , Hydraulic Cyl Seal , Tappet Cover Gasket , Hose , Sealing Ring Total Quantity : 36

BRR:8654723 Supply Of Aoh Kit For Panesar Model No. - Pel - 1000 Compressor. 01 Set Consisting Of 20 Items (41 Nos.) As Per Annexure - A.Aoh Kit For Panesar Model No. - Pel - 1000 Compressor. 01 Set Consisting Of 20 Items (41 Nos.) As Per Annexure - A.,Aoh Kit For Panesar Model No. - Pel - 1000 Compressor. 01 Set Consisting Of 20 Items ( 41 Nos.) As Per Annexure - A. [ Warranty Period: 30 Months After The Date Of Delivery ] [Quantity Tolerance (+/-): 5 %Age , Item Category : Normal , Total Po Value Variation Permitt Ed: Max 8 Lacs ] ] Electric Loco Shed Stores/Src, West Bengal 9.00 Set

BRR:8654720 Supply Of Set Of Gaskets For Aux. Compressor, Model - Crc 150. Each Set Consisting Of 4 Items - (1) Gasket To Elgis Part. No. 000411630 = 1 No. (2) Gasket To Elgis Part. No. - 00041164C = 1 No. (3) Gasket Cyl. To Valve Flat To Elgis Part. No. - 00041152A = 1 No. (4) Gasket Valve Flat To Cyl. Head To Elgis Part. No. - 00041153C = 1 No.Set Of Gaskets For Aux. Compressor, Model - Crc 150. Each Set Consisting Of 4 Items - (1) Gasket To Elgis Part. No. 000411630 = 1 No. (2) Gasket To Elgis Part. No. - 00041164C = 1 No. (3) Gasket Cyl. To Valve Flat To Elgis Part. No. - 00041152A = 1 No. (4) Gasket Valve Flat To Cyl. Head To Elgis Part. No. - 00041153C = 1 No.,Set Of Gaskets For Aux. Compressor, Model - Crc 150. Each Set Consisting Of 4 Items - ( 1) Gasket To Elgis Part. No. 000411630 = 1 No. (2) Gasket To Elgis Part. No. - 00041164C = 1 No. (3 ) Gasket Cyl. To Valve Flat To Elgis Part. No. - 00041152A = 1 No. (4) Gasket Valve Flat To Cyl. Head T O Elgis Part. No. - 00041153C = 1 No. [ Warranty Period: 30 Months After The Date Of Delivery ] [Quantity Tolerance (+/-): 5 %Age , Item Category : Normal , Total Po Value Variation Permitt Ed: Max 8 Lacs ] ] Electic Loco Shed Stores/Bksc, Jharkhand 70.00 Set Ser Electric Loco In Stores/Bksc, Jharkhand 16.00 Set Ser Electric Loco Shed Odisha 71.00 Set Stores/Bndm, Ser Electric Loco Shed Stores/Kgp, West Bengal 90.00 Set

BRR:8654375 Bids Are invited for Refit Spares For Both Cpp - Seamless O Ring , A - Locking Wire Dia 5 0 , B - Seamless O Ring , C - O Ring With Vulcanized Joint Seaamless O Ring , D - O Ring For Blade Foot , E - Strip , F - Seameless O Ring , G - Piston Ring With Clip , H - O Ring With Vulcanized Joint Seamless O Ring , J - Dubo Retaining Ring , K - Hexagon Socket Full Dog Point Hex Soc Set Screw Full Dog , L - Dubo Retaining Ring , M - Seameless O Ring , N - Hex Socket Set Screw Cup Point , O - Seamless O Ring , P - Dubo Retaining Ring , Q - Piston Seal , R - Hexagon Socket Head Cap Screw Hex Sock H Cap Screw , S - Heaxagon Socket Head Cap Screw Heaxagon Socket Head Cap Screw Rm , T - Guiding Bush , U - Heaxagon Socket Head Cap Screw , V - Hexagon Socket Set Screw Cup Point Hex Socket Set Screw Cup Point , W - Heaxagon Socket Head Cap Screw Hex Sock H Cap Screw , X - Seamless O Ring , Y - Rod Sealing , Z - Heaxagon Socket Head Cap Screw , Aa - O Ring Seamless O Ring Nbr70 I D 72 62X 3 53 , Ab - Hex Socket Head Cap Screw Hexagon Socket Head Cap Screw , Ac - Hex Socket Head Cap Screw Hexagon Socket Head Cap Screw , Ad - Locking Wire D 5 Locking Wire Dia 5 0 , Ae - Hex Socket Screw With Full Do Hex Soc Set Screw Full Dog , Af - Seamless O Ring , Ag - O Ring , Ah - Split Pin , Ai - Seamless O Ring , Aj - Seamless O Ring , Ak - Seamless O Ring , Al - Locking Wire Dia 5 0 , Am - Seamless O Ring , An - Heaxagon Socket Head Cap Screw , Ao - Bush Guiding , Ap - Hexagonal Socket Head Cap Screw Total Quantity : 743

BRR:8654374 Bids Are invited for Suction Side Casing Wear Ring For Sw Tws Backwash Pump - Suction Side Casing Wear Ring For Sw Tws Backwash Pump-For Details Refer Attached Specification , Delivery Side Casing Wear Ring For Sw Tws Backwash Pump - Delivery Side Casing Wear Ring For Sw Tws Backwash Pump-For Details Refer Attached Specification , Suction Side Impeller Wear Ring For Sw Tws Backwash Pump - Suction Side Impeller Wear Ring For Sw Tws Backwash Pump-For Details Refer Attached Specification , Delivery Side Impeller Wear Ring For Sw Tws Backwash Pump - Delivery Side Impeller Wear Ring For Sw Tws Backwash Pump-For Details Refer Attached Specification , Impeller Nut With Helicoil Insert For Sw Tws Backwash Pump - Impeller Nut With Helicoil Insert For Sw Tws Backwash Pump-For Details Refer Attached Specification , Lantern Bracket For Sw Tws Backwash Pump - Lantern Bracket For Sw Tws Backwash Pump-For Details Refer Attached Specification , Constant Level Oiler For Sw Tws Backwash Pump - Constant Level Oiler For Sw Tws Backwash Pump-For Details Refer Attached Specification , Oil Seal Set For Sw Tws Backwash Pump - Oil Seal Set For Sw Tws Backwash Pump-For Details Refer Attached Specification , Internal Circlip For Sw Tws Backwash Pump - Internal Circlip For Sw Tws Backwash Pump-For Details Refer Attached Specification , Suction Side Casing Wear Ring For Asw And Ccw Tws Backwash Pump - Suction Side Casing Wear Ring For Asw And Ccw Tws Backwash Pump-For Details Refer Attached Specification , Suction Side Impeller Wear Ring For Asw And Ccw Tws Backwash Pump - Suction Side Impeller Wear Ring For Asw And Ccw Tws Backwash Pump-For Details Refer Attached Specification , Impeller Nut With Helicoil Insert For Asw And Ccw Tws Backwash Pump - Impeller Nut With Helicoil Insert For Asw And Ccw Tws Backwash Pump-For Details Refer Attached Specification , Bearing Housing For Asw And Ccw Tws Backwash Pump - Bearing Housing For Asw And Ccw Tws Backwash Pump-For Details Refer Attached Specificat

BRR:8654349 Bids Are Invited For Supply, Installation, Testing, Commissioning Of Dx Type Cooling Coil As Per Annexure. , Condenser Coil Centrifugal/Screw Compressor With Dryer (Nalco) Total Quantity : 2

BRR:8654303 Bids Are Invited For Shearing Machine With Hydraulic Servo Control System , Igbt Based Heavy Duty Power Source Air Plasma Cutting System With Compressor Hydraulic Shearing Machine Total Quantity : 1

BRR:8653907 Bids Are Invited For M/S. Emerson Copeland Make Compressor, Model: Kcm514cal-B310h Total Quantity : 3

BRR:8653623 Bids Are Invited For Service Visit And Spare Parts Of Lpg Compressor At Hpcl Bhopal Lpg Plant Total Quantity : 1

BRR:8653584 Bids Are Invited For Custom Bid For Services - Providing Assistance For De-Silting Work Including Operation Of Barge & Compressor At Silt Ejector Of Tps (Reserved For Pafs/Locals)

BRR:8653512 Bids Are Invited For Ms Rod 30Mm Dia , Ms Rod 8Mm , Ms Rod 10Mm , Ms Rod 40Mm , Ms Rod 40 X 5 Mm , Ms Flat 50 X 5Mm , Aluminium Rod 40Mm Dia , Aluminium Ingot , Welding Rod 3 Point 15 Mm , Welding Rod 2 Point 15 Mm , Brazing Rod , Flux Borax , Welding Rod Cast Iron , Gas Welding Rod , Refilling Of Oxygen Gas , Refilling Of Acetylene Gas , Grinding Disc 4 Inch , Grinding Disc 5 Inch , Standing Disc 4 Inch 36 Grit , Standing Disc 4 Inch 100 Grit , Standing Disc 5 Inch 36 Grit , Standing Disc 5 Inch 100 Grit , Cutting Wheel 4 Inch Dia , Cutting Wheel 5 Inch Dia , Backing Pad For Sanding Disc 5 Inch , Sanding Sleeve 36 Grit , Sanding Sleeve 100 Grit , Pop Up Rivet Aluminium 3 Mm , Pop Up Rivet Aluminium 4 Mm , Pop Up Rivet Aluminium 5 Mm , Buffing Wheel White Cloth , Buffing Cake , Cutting Wheel 355Mm , Bentonite Powder , Parting Sand , Graphite Powder , Coal Dust , Headless Nails , Suhaga Flux , Cotton Hand Gloves , Araldite Adhesive 200 Gm , Masking Tape 1 Inch X 30M , Fevicol Sh , Nails Assorted Sizes , Pvc Bidding Patti , Fevicol Heatex , Self Tapping Screw 2 Inch , Self Tapping Screw 1 And Half Inch , Soft Wood Scantling 3 Inch X 3Inch , Emery Paper , Air Compressor Hose , Paint Yellow , Paint Red , Paint Black , Paint Blue , Turpentine , Touchwood , Red Oxide Primer , Resin With Hardner , Pigment Colour 15 Gm Packet Total Quantity : 1905

BRR:8653387 Bids Are invited for Wiper Blade Rh - Scorpio , Wiper Blade Lh - Scorpio , Wiper Arm With Blade Rear - Scorpio , Brake Disc Pad - Scorpio , Compressor Assy - Scorpio , Suction Hose Assy - Scorpio , Major Kit For Caliper - Scorpio , Coolant Pipe Hose - Scorpio Total Quantity : 11

BRR:8652975 Bids Are invited for D-Spanner Set Der 12 , Ring Spanner Set 1812 , Oil Filter Clamp Sfw 12 , Cutting Plier , 903 Screw Driver , Socket Set S14mxl , Kb4m 9 X Ln Key , Kth 9S Ln Key , Screw Driver 938 , Screw Driver 842 , Screw Driver 1014 , Screw Driver 1013 , Screw Driver 840 , Screw Driver Bs 31 , Chisel Taparia , Nose Plier 1441 13 Inner , Nose Plier 1442 13 Inner , Clamp Meter , Nose Plier 1443 13 Inner , Nose Plier 1444 13 Outer , Piston Ring Clamp , Screw Driver 824 , Tea Handle , Sf4 Hammer , Magnatic Stick , Snaf Of Cutter , Hpw 18 Pipe Wrench , Combination Spanner Set , Nose Plier 1441 9S Inner , Nose Plier 1443 9S Outer , Magnatic Stand With Dial Guage , Drill Bit , Stud Extractor , Bearing Puller , Tool Box , Eastman Impact Driver , Kbhi 10 X Ln Key , Tubular Set , Dw 09 Ds Spanner , Dw 09 Ring Spanner , Lugs Crimping Tool , Mechanical Crimping Tool , Half Moon Spanner 0810 , Half Moon Spanner 1213 , Half Moon Spanner 1415 , Half Moon Spanner 1617 , 1017 Screw Driver , Digital Vernier Clipper , Bosch Impact Wrench , 3330 Socket Set , Bosch Drill Machine With Accessories , Stanley 46 Bit Set Total Quantity : 53

BRR:8652904 Bids Are Invited For Repair, Maintenance, And Installation Of Plant/ Systems/Equipments (Version 2) - Rr Site 5 And 6; Filtration Of Mot Lube Oil Of Total Capacity 40 Kl By Using Clean Oil Filtration Trolley Of Minimum 200 Lpm Capacity At Raps 6 For Detail Refer Boq Item.. , Repair, Maintenance, And Installation Of Plant/ Systems/Equipments (Version 2) - Rr Site 5 And 6; Inspection Of Raps 6 Turbine In Minor Overhauling Turbine Of Ukrainian Energy Machine Ukraine Bearings Turbine Blades Governing System Equipment Oil Flu.. , Repair, Maintenance, And Installation Of Plant/ Systems/Equipments (Version 2) - Rr Site 5 And 6; Dismantling And Assembly Of Generator Ukrainian Energy Machines In Raps 6 For Detail Refer Boq Item No 3 In Scope Of Work And 1 Bid Lumpsum Qty Is Equ.. , Repair, Maintenance, And Installation Of Plant/ Systems/Equipments (Version 2) - Rr Site 5 And 6; Miscellaneous Jobs Like Mot Or Tot Cleaning Seal Oil Lube Oil Gasket Lld Line Diaphragm Replacement Etc In Raps 6 Minor Overhauling For Detail Refer Bo.. , Repair, Maintenance, And Installation Of Plant/ Systems/Equipments (Version 2) - Rr Site 5 And 6; Deployment Of Oem Experts For Stage Inspection In Minor Bsd At Raps 6 Covering Turbine Generator And Governing System Jobs For Detail Refer Boq Item No.. , Repair, Maintenance, And Installation Of Plant/ Systems/Equipments (Version 2) - Rr Site 5 And 6; Generator Rotor Thread Out In Decoupling Alignment And Coupling In Raps 6 Minor Overhauling For Detail Refer Boq Item No 6 In Scope Of Work And 1 Bid L.. , Repair, Maintenance, And Installation Of Plant/ Systems/Equipments (Version 2) - Rr Site 5 And 6; Deployment Of Vibration Or Balancing Experts At Raps 6 Minor Overhauling Before Shutdown For Detail Refer Boq Item No 7 In Scope Of Work And 1 Bid Lum.. , Repair, Maintenance, And Installation Of Plant/ Systems/Equipments (Version 2) - Rr Site 5 And 6; Deployment Of Vibration Or Balancing Experts At Raps 6 Minor Overhauling During Startup For Detail Refer Boq Item No 8 In Scope Of Work And 1 Bid Lump.. , Repair, Maintenance, And Installation Of Plant/ Systems/Equipments (Version 2) - Rr Site 5 And 6; In Situ Dynamic Balancing Of Tg In Raps 6 Major And Minor Bsd For Detail Refer Boq Item No 9 In Scope Of Work And 1 Bid Lumpsum Qty Is Equal To 1Lumps.. , Repair, Maintenance, And Installation Of Plant/ Systems/Equipments (Version 2) - Rr Site 5 And 6; Rectification Of Leak If Any Anomaly Found During Hydro Test Of Stator Winding For Detail Refer Boq Item No 10 In Scope Of Work And 1 Bid Lumpsum Qty I..

BRR:8652876 Bids Are invited for Rep Kit Piston Ring - Tmb , Injector Nozzle - Tata , Rep Kit For Wiper Accessories - Tata , Spider Brg - Mg , Combination Switch - Stln Total Quantity : 12

BRR:8652862 Bids Are Invited For Sprocket Wheel Master Pin Sprocket O Ring Sprocket Hub Hub Key Disc Track Roller Ring Piston top Ring piston secunel Ringpiston oil Total Quantity : 43

BRR:8652791 Bids Are invited for Mounting Engine Front - Maruti , Bolt Tee Head - Stln , Seal Oil - Sml , Tank Coolant Vehicular - Stln Vf , Major Repair Kit - Hmv , Cover Assy - Stln , Repair Kit Control Unit - Tatra , Air Compressor - Stln Total Quantity : 17

BRR:8652784 Bids Are invited for Cabin Shocker - Lv7/Stln , Brake Booster Hose - Lv7/Stln , Air Compressor Pipe Line - Lv7/Stln , Clutch Master Cyl Assy - Lv7/Tata , Knuckle Brg - Lv7/Tata , Main Shaft Assy - Lv7/Tata , Hub Assy - Xenon , Hub Brg - Xenon Total Quantity : 11

BRR:8652779 Bids Are invited for Repair Of Welding Machine , Washing Plant Pipe , Welding Rod , Hummer Jump Starter , Petrol Engine Compressor Tester , Diesel Engine Compressor Tester , Bosch Drill Machine , Bosch Hand Cutter , Magnetic Tray , Cutting Plier Toptul , Hand Gloves , Nose Plier Big , Stanley Tool Kit 132 Pieces , 10 Ton Hyd Trolley Jack Total Quantity : 41

BRR:8652307 Tender For Repair/Maintenance Of Various Ductable/ Cassette/ Tower Type Acs And Connected Items In The Area Of Hq Wac Under Ge (Af) Subroto Park.; 1 Servicing of tower /cassette AC/Duntable type split AC/package type AC/Clod storage of capacity 3/3.5/4.5/8.5 of any make at different locations at Subroto Park, tersting the unit completge with the following tasks:-(a) Overhearting of servicing(b) Inspection opening washsing the condesnor coil and cooling coil with chemical followed with pressurized water jet complete.(c)Inspection of leakage of refrigerent in the system(d)Checking the operation of blower motor, condesnor morto and swing motor for noise free operations.(e) Oilling of condesnor/bloer motors and cheking the earth continuity.(f)Inspection of all electerical parts/connections and remove if any defect.(g) Checking the functinal of electronic remote control unit to ensure satisfactory functioning o funit complete all as specified and as directed by Engr -in-Charge.Note:-(a)Spare parts shall be measured and pair separately.(b) Repeated complaints of smae air conditioner will not be measured aiganst and no extra payment will be made.(c)Rate of vist against complaint deemed to be included in the rate quoted above.Note - The contractor to maintain the job card of each AC having complete details of each AC & Schedule of repari & serving, the format of job card to be approved by Enginner in charge. 2 Supply and fixing in replacement of the following UNSV spare parts for Tower/Casette/Ductable type split AC/Package type AC of capacity 3/3.5/4/5.8.5 TR air Conditioners of any make & complete all as specified and direted by Engr -in-Charge(a) Single phasing preventor as per existing size and capacity 3 All as per item No 2 here in before but Three Phase connector as per existing size complete all as specified and directed. 4 All as per item No 2 here in before but Contactorthree phase as per existing size and complete all as specified and directed. 5 All as per item No 2 here in before butRunning Capacitor as per existing size & capacity complete all as specified and directed. 6 All as per item No 2 here in before butCopper tubing flexible of dia 7/8 with insulation and brazing work complete all as specified and directed. 7 All as per item No 6 here in before but ot dia 1/2 complete all as specified and directed. 8 Flexible copper cable 5 core multi stranded of size 2.5 Sqmm 1100 Vcomplete all as specified and directed. 9 Triple pole and earth enclosure with a three pin and earth plug with socket complete with one triple pole MCB 32 Amps 415 V complete all as specified and directed. 10 MCCB TPN 63 Amp 16 KA 415 Volts 50 Hz with adjustable thermal and fixed magnetic setting complete all as specified and directed. 11 Condenser motor three phase suitable for tower type AC of cap 3.5 TR as per existing size and model complete all as specified and directed. 12 All as per item No 11 above but blower motor complete all as specified and directed. 13 Condensor motor three phase suitable for cassette type AC of cap 3.0/4.0 TR as per existing size and model 14 All as per item No 13 above but blower motor complete all as specified and directed. 15 Condensor motor three phase suitable for ductable type split AC of cap 5.0/8.5 TR as per existing size and model complete all as specified and directed.. 16 All as per item No 15 above nut blower motor complete all as specified and directed. 17 Blower as per existing suitable for Tower /Cassette AC of cap 3.0/3.5/4.0 TR complete all as specified and directed. 18 Blower as per existing suitable for Ductable type split AC of Cap 5.0 / 8.5 TR complete all as specified and directed. 19 M&L for repair to unserviceable cordless PCB remote control unit any type normal or inverter of Tower type AC 3.0 / 3.5 TR, Cassette type AC of capacity 3/ 4.0 TR, Ductable type split AC of cap 5/8.5 TR including replacement of unserviceable spare parts and refixing, connection of electrical control circuit, testing for satisfactory functioning complete all as specified and as directed. 20 M&L for insulation to copper tubing of Tower type AC 3.0 / 3.5 TR, cassette type AC of capacity 3/4.0 TR, Ductable type split AC of cap 5/ 8.5 TR with heavy duty rubber foam insulation as per existing density and thermal conductivity including packing material and PVC tie complete all as specified and as directed. 21 M&L for Low density polyethylene pipes (LDPE) / flexible threaded liner type pf pressure rating 6 kg / cm2 laid in trenches, walls of dia 25 mm complete all as specified and as directed. 22 Supply & charging the refrigerant gas to Tower / Cassette AC of capacity 3/3.5/4 TR after detecting & repairing leakage by brazing, provn of extra of extra copper tubing if required improvement of efficiency, testing complete all as specified and directed. 23 S&F in replacement scroll compressor of cap 4.0 TR with washers, bolts and nuts three phase 415V 50 Hz suitable for cassette type AC of make Blue Star model No SCR481SE2 or its equivalent in Volts/Hitachi including brazing of respective copper tubing incl providing of extra insulated copper tubing, leak chek, dehydration of the system with complete all as specified and directed. 24 S&F in replacement scroll compressor of cap 3.5 TR with washers, bolts and nuts three phase 415V 50 Hz suitable for tower /verticool type AC of make Blue Star model No VCE421SE2 or as per existing including brazing of respective copper tubing incl providing of extra insulated copper tubing, leak check, dehydration of the system with compressed nitrogen, and gas charging upto required level testing the unit for satisfactory functioning complete all as specified and as directed. 25 M&L for rewinding of condensor fan motor of tower AC / ductable type split AC / Package type AC of cap 3 /3.5 / 5.0 TR including replacement of gun metal bushes, testing for noise free operation and refixing at its existing location complete all as specified and as directed. 26 M&L for rewinding of condensor blower motor of tower AC / ductable type split AC / Package type AC of cap 3/ 3.5 /5.0 TR including replacement of gun metal bushes, testing for noise fee operation and refixing at its existing location complete all as specified and as directed. 27 M&L for refrigerant charging (R-22) for ductable split type unit of capacity 8.5 TR after removing all leakage of the cooling system including leak test, flushing & dehydration with compressed nitrogen gas incl providing extra copper tubing of exiting size for satisfactory functioning of the unit etc complete all as specified and as directed. 28 M&L for rewinding to 3 phase condensor motor suitable for 8.5 TR ductable split type AC with super enamelled copper winding wire including replacement of gun metal bushes and refixing to its existing location complete all as specified and as directed. 29 M&L for rewinding to single phase indoor unit blower motor suitable for ceiling mounted AHU of 8.5 TR ductable split type AC with super enamelled copper winding wire including replacement of gun metal bushes and refixing to its existing location complete all as specified and as directed. 30 S&F in replacement to condensor fans suitable for 5/8.5 TR ductable split unit complete all as specified and as directed. 31 S&F in replacement to single phase preventor 415 Volts AC 50 Hz phase -65+/- 10 V AC complete all as specified and as directed. 32 S&F in replacement to relay IC/0.5A complete all as specified and as directed. 33 S&F in replacement to room thermostate switch T-63 T3B 10 A 250 V complete all as specified and as directed. 34 S&F in replacement to contactor 50A 5 KA max fuse 90 A torque 10 lb inch complete all as specified and as directed. 35 S&F in replacement to running capacitor 20 mfd IS:2993 -1998, 440 V 50 Hz 20-0 uf+/-5% complete all as specified and as directed. 36 S&F in replacement to HP / LP switch suitable for ductable split type AC of cap 8.5 TR complete all as specified and as directed. 37 S&F in replacement to solid core liquid line filter drier suitable for ductable split type AC of cap 8.5 TR complete all asspecified and as directed. Make - Danfoss cat part No DCL-164 or equivalent in Kirloskar 38 M&L for MCCB 160 Amps 4 pole 25 KA 415 volts 50 Hz with adjustable thermal and fixed magnetic setting including taking out old unserviceable MCCB from panel complete all as specified and as directed. 39 M&L for MCCB 100 Amps 4 pole 25 KA 415 volts 50 Hz with adjustable thermal and fixed magnetic setting including taking out old unserviceable MCCB from panel complete all as specified and as directed. 40 Supply and Topping up / replacement of transformer oil of dielectric strength of 40 KVA for voltage stabilizer complete all as specified and as directed. 41 S&F in replacement remote control unit for tower type AC of cap 3.0/3.5 TR for Model No VCE 421SC2 of Blue Star Microprocessor based or equivalent in Voltas / Hitachi complete with transmission and receiving unit dual mode of cord cordless with features of digital display mode selection, timer, temperature control complete all as specified and as directed. 42 S&F in replacement Remote control unit for ductable split type AC of Cap 8.5 TR microprocessor based or equivalent in Voltas / Hitachi complete with transmission and receiving unit dual mode of cord / cordless with features of digital display mode selection timer temperature control complete all as specified and as directed. 43 S&F in replacement Remote control unit for cassette type AC of cap 4.0 TR microprocessor based complete with transmission and receiving unit dual mode of cord / cordless with features of digital display mode selection timer temperature control complete all as specified and as directed. 44 S&F in replacement sub main wiring with two run single core 10 Sqmm PVC insulated unsheathed cable 1100 volts FRLS grade with multi strand copper conductor and drawn through and including PVC conduit along with one run 10 Sqmm continuous earthing wire but in green colour complete concealed in wall / ceiling and connected to common earth dolly of the following size.Note : Three run of 10 Sqmm PVC cable and one run of PVC conduit shall be measured as one unit length. 45 S&F in replacement sub main wiring with four run single core 6 Sqmm PVC insulated unsheathed cable 1100 volts FRLS grade with multi strand copper conductor and drawn through and including PVC conduit along with one run 6 Sqmm continuous earthing wire but in green colour complete concealed in wall / ceiling and connected to common earth dolly of the following size.Note : Five run of 6 Sqmm PVC cable and one run of PVC conduit shall be measured as one unit length. 46 S&F in replacement sub main wiring with four run single core 10 Sqmm PVC insulated unsheathed cable 1100 volts FRLS grade with multi strand copper conductor and drawn through and including PVC conduit along with one run 10 Sqmm continuous earthing wire but in green colour complete concealed in wall / ceiling and connected to common earth dolly of the following size.Note : Five run of 10 Sqmm PVC cable and one run of PVC conduit shall be measured as one unit length. 47 Supply and fixing in replacement of unserviceable single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and directed. 48 Supply and fix in replacement of MCB SP 6 to 32 Amps 230 Volts, C series 50 Hz single phase complete all as specified and directed. 49 Supply and installation in replacement of phase frequency corrector of capacity 25 HP of 3 Phase corrector for 3 phase tower / cassate / ductable Split AC and other 3 phase items, electrically controlled with interlocking system duly pre wired complete all as specified and as directed. 50 M&L for MCCB 200 Amps 4 pole 25 KA 415 volts 50 Hz with adjustable thermal and fixed magnetic setting including taking out old unserviceable MCCB from panel complete all as specified and as directed. 51 M&L for MCCB 250 Amps 4 pole 25 KA 415 volts 50 Hz with adjustable thermal and fixed magnetic setting including taking out old unserviceable MCCB from panel complete all as specified and as directed. 52 M&L for MCCB 400 Amps 4 pole 25 KA 415 volts 50 Hz with adjustable thermal and fixed magnetic setting including taking out old unserviceable MCCB from panel complete all as specified and as directed. 53 M&L for dismantling of complete unit of automatic voltage stabilizer oil cooled type 3 phase 440 volts, 50 Hz, 16.5 /25/30/50 KVA capacity after disconnecting of electrical connection, taking out oil strip blue line, cleaning and segregating of mechanical mechanisum of operation as per direction of Engr-in-Charge cleaning of inner surface of tank, carrying out repairs including replacement of worm out parts, replacement of nuts, bolts of required Nos, refilling of transformer oil, after dehydration upto 60 KV, assembling connecting to electric supply load and on site testing on full load for manual corrected output voltage at variable (permissible limit) input voltage and cut off action on low voltage up to the entire satisfaction of the Engr-in-charge. Note - Spare parts shall be measured and paid separately and above mentioned entire specification and fixing of spare parts is included in this job) 54 Supply only servomotor of existing shape and size complete all as specified and as directed 55 Supply only Electronic circuit card (PCB ) complete all as specified and as directed. 56 Supply only Electronic circuit card PCB holder complete all as specified and as directed. 57 Supply only Micro switch of existing shape and sizes complete all as specified and as directed. 58 Supply only Carbon brush with brush holder (set of three) complete all as specified and as directed. 59 Supply only Potentio meter complete all as specified and as directed. 60 Supply only Push button switch as per existing shape and size complete all as specified and as directed. 61 Supply only tigger transformer complete all as specified and as directed. 62 Supply only drive assembly 25/35 KVA per phase complete all as specified and as directed. 63 Supply only RC network servo meter complete all as specified and as directed. 64 Supply only Ampere meter with CT complete all as specified and as directed 65 Supply only panel lamp complete all as specified and as directed. 66 Supply only Dimmer state 20 to 30 Amps complete all as specified and as directed. 67 Supply only servo oil for voltage stabilizer complete all as specified and as directed 68 M&L for dismantling of complete unit of automatic voltasge stabilizer oil cooled type 3 phase 440 volts, 50 Hz, 100 / 150 KVA after disconnecting of electrical connection , taking out oil strip blue line, cleaning and segregating of mechanical mechanisum of operation as per direction of Engr-in-Charge cleaning of inner surface of tank, carrying out repairs including replacement of worm out parts, replacement of nuts, bolts of required Nos, refilling of transformer oil, after dehydration assembling connecting to electric supply load and on site testing on full load for manual corrected output voltage at variable (within permissible limit) input voltage and cut off action on low voltage upto the entire satisfaction of the Engr-in-Charge. (Note : Spare parts shall be measured and paid separately and above mentioned entire specification and fixing of spare parts is included in this job). 69 Supply only servomotor of existing shape and size complete all as specified and as directed. 70 Supply only Electronic circuit card (PCB) complete all as specified and as directed 71 Supply only Electronic circuit card (PCB) complete all as specified and as directed 72 Supply only Micro switch of existing shape and sizes complete all as specified and as directed. 73 Supply only Carbon brush with brush holder (set of three) complete all as specified and as directed. 74 Supply only Potentio meter complete all as specified and as directed. 75 Supply only Push button switch as per existing shape and size complete all as specified and as directed. 76 Supply only tigger transformer complete all as specified and as directed. 77 Supply only drive assembly 25/35 KVA per phase complete all as specified and as directed 78 Supply only RC network servo meter complete all as specified and as directed. 79 Supply only Ampere meter with CT complete all as specified and as directed 80 Supply only panel lamp complete all as specified and as directed. 81 Supply only Dimmer state 20 to 30 Amps complete all as specified and as directed. 82 M&L for dismantling of complete unit of automatic voltage stabilizer oil cooled type 3 phase 440 volts, 50 Hz, 200 KVA after disconnecting of electrical connection, taking out of strip blue line, cleaning and segregating of mechanical mechanisum of operation as per direction of Engr-in-Charge cleaning of inner surface of tank, carrying out repairs including replacement of worm out parts, replacement of nuts, bolts of required Nos, refilling of transformer oil, after dehydration, assembling connecting to electric supply load and on site testing on full load for manual corrected output voltage at variable (within permission limit) input voltage and cut off action on low voltage up to the entire satisfaction of the Engr-in-charge. (Note - Spare parts shall be measured and paid separately and above mentioned entire specification and fixing of spare parts is included in the job) 83 Supply only servomotor of existing shape and siz complete all as specified and as directed. 84 Supply only Elecronic circuit card PCB holder 85 Supply only Elecronic circuit card PCB holder 86 Supply only Micro switch of existing shape and sizes complete all as specified and as directed. 87 Supply only Carbon brush with brush holder (set of three) complete all as specified and as directed. 88 Supply only Potentio meter complete all as specified and as directed. 89 Supply only Push button switch as per existing shape and size complete all as specified and as directed. 90 Supply only tigger transformer complete all as specified and as directed. 91 Supply only drive assembly 25/35 KVA per phase 92 Supply only RC network servo meter complete all as specified and as directed. 93 Supply only Ampere meter with CT complete all as specified and as directed 94 Supply only panel lamp complete all as specified and as directed. 95 Supply only Dimmer state 20 to 30 Amps complete all as specified and as directed. 96 Excavation in trenches in soft/loose soil not exceeding 1.50 Mtgrs wide and not exc 1.5 Mtr deep and getting out for taking out / laying cable, poles & stay etc complete all as specified and as directed. 97 Returing , filling in including spreading levelling, watering and well ramming in layers not exc 25 cm thick after the cable have been laid tested complete all as specified and as directed. 98 Removal of excavated surplus soil to a distance not exc 50 mtrs and depositing where directed at a level not exc 1.5 Mtr above the starting point complete all as specified and as directed. 99 M&L for sand cushioning to under ground cable provided with layer of sand (8 cm deep before laying the cable and 15 cm deep after laying the cable i.e total 23 cm complet all as specified and as directed. 100 M&L for brick laid in trenches for cable protection of burnt clay sub class B complete laid dry flat complete all as specified and as directed. 101 Taking out old unserviceable LT under ground cable any type from trenches, pipes, & poles complete all as specified. 102 Supply and lay (in trenches / duct / fixing to pole / wall or in such similar position) Lt UG cable XLPE insulated armoured and PVC sheathed LT 1100 volts grade with aluminium conductor in replacement of existing U/s UG cable including taking down old unsv UG cable from existing position of following stranded of sizes:-(a)25 Sqmm 4 core 103 All as per item No 102 above but 35 Sqmm 3.5 core 104 All as per item No 102 above but 50 Sqmm 3.5 core 105 All as per item No 102 above but 95 Sqmm 3.5 core 106 All as per item No 102 above but 120 Sqmm 3.5 core 107 Supply, assembly and erection in repairs GI sheet with TDF flange rectangular / square duct made out of L shaped hollow profile, duly factory boxed, incl all accessories such as supply air and return air diffuser, corner, cleat, carrage, bolt gasket and appropriate sealent on longitudinal joints etc complete of size 18 Gauge complete all as specified and as directed. 108 M&L for duct insulation with resin bonded fibre glass wool roll of density 24 Kg/Cum with factory laminated aluminium vapour barrier, thickness of insulation 40mm as specified and including the following:- (a) Cleaning the duct surface (to be insulated) by scrapping carefully with wire brush etc to make the surface completely free of millscale, dirt, dust, grease and other foreign materials, taking special care so that all duct joints are sealed against any leakage.(b) Applying rubber based adhesive CPRX compound. (c) Sealing of all longitudinal joint and circular overlaps with and including Aluminium foil tape 50 mm wide, to make the insulation leakproof. (d) Securing the insulation with and including mechanically fastened nylon. 109 Supply & fixing in replacement of Refrigeration control wiring with copper conductor, PVC insulated, unsheathed, multistranded, 1100V grade, single core / multi core of size 1.5/2.5 Sqmm, removing burned cables from existing position and replacement of multicore control wiring etc for interlocking arrangement as per standard practice with thermostat, humidistat, solenoid valve, blower motor, condenser fans, control wiring etc all as specified and as directed. 110 Supply and installation in replacement of voltage stabilizer capacity 5 KVA, AC supply 180 volt to 240 volts, 50 Hz fixing on wall all as specified and as directed. 111 M&L for replacement of condensor / Air filters in out door unit and AHU of ductable split AC 6.5 TR capacity including taking out unsv filters from existing position and fixing of new filters etc all as specified and as directed. 112 M&L for cleaning of AHU and duct of ductable split AC, taking out diffuser and removing of dirt particales, dust and other materials by using thinner or chemical with cleaning brush at any situation including necessary tools for cleaning of duct all as specified and directed. 113 S&F in replacement of diffuser in ductable split AC for existing size and shape before fixing contractor shall be taking out measurement of existing size including taking out unsv diffuser all as specified aand as directed. 114 S&F in replacement of stainer for AHU unit of Ductable split AC including taking down unsv items all as specified and directed.

BRR:8652254 Supply Of Main Hole Body With Diaphragm With Stud As Per Drg. No. Wd-86081-S-61.Main Hole Body With Diaphragm With Stud As Per Drg. No. Wd-86081-S-61.,Main Hole Body With Diaphragm With Stud As Per Drg. No. Wd-86081-S-61 Alt 13 Or Latest Item 2 & 3. [ Warranty Period: 30 Months After The Date Of Delivery ] [Quantity Tolerance (+/-): 5 %Age , Item Category : Normal , Total Po Value Variation Permitted: Max 8 Lacs ] ]

BRR:8651837 Supply Of Cylinder Head Dia 127Cylinder Head Dia 127,Cylinder Head Dia 127 For Compressor(Trc2507) Of 1400 Hp Demu Make Elgi Part No 0 00215150. [ Warranty Period: 30 Months After The Date Of Delivery ] [Quantity Tolerance (+/-): 5 %Age , Item Category : Normal , Total Po Value Variation Permitt Ed: Max 8 Lacs ] ]

BRR:8651703 Supply Of Teflon Sheet With One Flat Washer & Round Head Screwteflon Sheet With One Flat Washer & Round Head Screw,Teflon Sheet With One Flat Washer & Round Head Screw For 1 1/4 None Return Valve As Per D Rawing No. Ipte/El/Sk-104. [ Warranty Period: 30 Months After The Date Of Delivery ] ]

BRR:8651631 Supply Of Washers For Lower Spring Seatwashers For Lower Spring Seat,Washers For Lower Spring Seat , Thickness 5Mm To Se/Kgps Sk. No.0590/Kgp And Top Sp Ring Seat For Axle Box Guide Arrangement To Icf Drg. No. T-0-1-608, Alt.L/11, Item-1 (One Set Consists O F Washer For Lower Spring Seat And Top Spring Seat, One No. Each). [ Warranty Period: 30 Months Afte R The Date Of Delivery ] [Quantity Tolerance (+/-): 5 %Age , Item Category : Normal , Total Po Value Variation Permitt Ed: Max 8 Lacs ] ]

BRR:8651594 Supply Of Coupling Tyre [ F 100 Type ] For Rr20100coupling Tyre [ F 100 Type ] For Rr20100,Coupling Tyre [ F 100 Type ] For Rr20100 Elgi Make Compressor As Per Elgi Pt. No. ? 0 70303170 [ Warranty Period: 30 Months After The Date Of Delivery ] [Quantity Tolerance (+/-): 5 %Age , Item Category : Normal , Total Po Value Variation Permitt Ed: Max 8 Lacs ] ]

BRR:8651583 Supply Of Spares For Air Compressorsspares For Air Compressors,Spares For Air Compressors - Spare Parts Of Seamless Extruded Aluminium Alloy Pneumatic Pi Peline Capable Of Withstanding Working Pressure Of 12 Kg/Cm2. All Should Be Made Of Non-Corrosive Compos Ite Aluminium Alloy. Quantity And Specifications Will Be As Per Annexure -I. One Set Includes All Items Menti Oned In Annexure-I. Tpi Inspection And Material Certification Require With Test Certificate Of Minimum 12 Kg/ Cm2. [ Warranty Period: 30 Months After The Date Of Delivery ] ] Senior Section Engineer Gujarat 1.00 Set

BRR:8651542 Supply Of Cylinder Liner 197 Mm Dia To Elgi Part No. 000320920 For Compressor Model No. Trc2507 For 1400Hp Demu/Dpccylinder Liner 197 Mm Dia To Elgi Part No. 000320920 For Compressor Model No. Trc2507 For 1400Hp Demu/Dpc,Cylinder Liner 197 Mm Dia To Elgi Part No. 000320920 For Compressor Model No. Trc2 507 For 1400Hp Demu/Dpc [ Warranty Period: 30 Months After The Date Of Delivery ] ]

BRR:8651507 Supply Of Elgi Make Repair Kit For Compressor Rr 15070 Demu Dpc 1600 Hp To Elgi Part No. 072420209 As Per Annexure. Material To Be Procured From Oem Or Their Authorized Dealer / Distributor Only.Elgi Make Repair Kit For Compressor Rr 15070 Demu Dpc 1600 Hp To Elgi Part No. 072420209 As Per Annexure. Material To Be Procured From Oem Or Their Authorized Dealer / Distributor Only.,Elgi Make Repair Kit For Compressor Rr 15070 Demu Dpc 1600 Hp To Elgi Part No. 0 72420209 As Per Annexure. Material To Be Procured From Oem Or Their Authorized Dealer / Di Stributor Only. [ Warranty Period: 30 Months After The Date Of Delivery ] ]

BRR:8651485 Tender For Special Repair Of Para Kasimabad Road To Jiyanpur Link Road - W.B.M (Grade-3) Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with threewheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. ( excludingGST) 2 Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502. (including emulsion but excluding GST) 3 Providing and applying tack coat with bitumen VG-10 using bitumen distributor at the rate of 0.30 kg per sqm on the prepared bituminous surface cleaned with hydraulic broom as per Technical Specification Clause 503.(including bitumen but excluding GST) 4 Providing, laying and rolling of open graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 (13.2mm & 11.20mm in 2:1)mm aggregates either using penetration grade bitumen VG-10 to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of Type C as per Technical Specification Clause 508.(including bitumen but excluding GST) 5 Providing and laying seal coat sealing 6.7mm stone grit @0.009 cum per sqm the voids in a bituminous grade VG-10 @0.65kg per sqm surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510.(including bitumen but excluding GST) 6 Cement Concrete Pavement Construction of un-reinforced, expansion and constructionjoint only, plain cement concrete pavement, thikness as per design, over a prepared sub base with 43 grade cement or any other type as per clause 1501.2.2 M 30 (Grade), coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and apprpriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micronthik polythene film, wedges, steel plates including leveling the formwork as per drawing) spreading the concrete with shovels, rakes, compacted using needle, screed and platevibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying sealant, near approaches to bridge/ culvert and construction joints, admixtures as approved, curing of concrete slabs for 14 days and water finishing to lines and grades as per drawing and Technical specification clause 1501 and as per direction of E-In-C fo work.(including bitumen but excluding GST) 7 Construction ofEarthen ShouldersConstructionof Subgrade and earthen shoulders with approved material obtained from R.O.W. with all lift and leads, transporting to site, spresding grading to reqiire slope and compacted to meet requirementof Tables300.2 as per Technical Specification Clause 303.1 (For PC) 8 Construction ofEarthen ShouldersConstructionof Subgrade and earthen shoulders with approved material obtained from R.O.W. with all lift and leads, transporting to site, spresding grading to reqiire slope and compacted to meet requirementof Tables300.2with lead upto 1000 m as per Technical Specification Clause 303.1 Cartage earth (For CC)

BRR:8651483 Tender For Special Repair Of Chak Alam Anusuchit Basti Link Road; 1 W.B.M (Grade-3) Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with threewheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. ( excludingGST) 2 Cement Concrete Pavement Construction of un-reinforced, expansion and constructionjoint only, plain cement concrete pavement, thikness as per design, over a prepared sub base with 43 grade cement or any other type as per clause 1501.2.2 M 30 (Grade), coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and apprpriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micronthik polythene film, wedges, steel plates including leveling the formwork as per drawing) spreading the concrete with shovels, rakes, compacted using needle, screed and platevibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying sealant, near approaches to bridge/ culvert and construction joints, admixtures as approved, curing of concrete slabs for 14 days and water finishing to lines and grades as per drawing and Technical specification clause 1501 and as per direction of E-In-C fo work.(including bitumen but excluding GST)

BRR:8650969 Tender For Special Repair To Roads At 10 Guards And I Adou Under Ge (South) Patiala.; 1 Material and labour for preparing existing black top surfaceby brushing with wire brushed for removing caked mud etc sweeping with brooms and finally fanning to cleaned surface with gunny bags to remove all loose dirt etc from black top surface, Applying evenly a premix /tack coat with bitumen grade VG-10 @ 5.0 Kg per ten Sqm complete all as specified and as directed by Engineer-in-charge. 2 Material and labour for laying Premix Bituminous macadam of consolidated thickness 25mm to 50mm, using paving bitumen binder of grade VG-30 @ and binder content of 4% by weight of total mix with mixing of aggregates and VG-30 bitumen in electronic operated 100-120 TPH batch type hot mix plant, transporting the hot mix from HMP to work site by tippers and laying with hydrostatic paver finisher (Paver shall not be compulsory in case of patch work using B.M.) and as per approved mix and rolled & compacted to required camber and gradient with 8 to 12 tonne smooth wheeled, vibratory and tandem roller, complete all as per Clause 504 MoRTH (5th Rev) specification complete all as specified and as directed by Engineer-in-charge. Notes : (i). The contractor shall quote the rate against Item considering 4% VG-30 bitumen content. Job Mix Formula as per CI. No. 505.3.3 of MORTH (5th Rev) for BM shall be worked out from Thapar Institute. of Engg & Tech Patiala/NIT Kurukhshetra /PEC Chandigarh/CTL for obtaining optimum binder content (OBC) by the Contractor without any financial effect to the Dept and same be submitted to the accepting officer for approval. Any variation in binder content on minus side shall be adjusted @ 50/kg of binder and no adjustment shall be made on plus side.(ii). The BM shall be covered with top layer/wearing course within in a maximum of 48 hours. If ther is to be any delay, by the contractor the course shall be covered by seal coat to the requirement of Clause 512 of MORTH (5th Rev) before opening to the traffic. The seal coat in such cases shall be considered incidental to the work and shall not be paid for separately. 3 Material and labour for applying evenly a premix /tack coat with bitumen grade VG-10 @ 4.0 Kg per ten Sqm complete all as specified and as directed by Engineer-in-charge. 4 Material and labour for laying Premix Bituminous concrete 30mmconsolidated thickness with 5.5% binder (paving bitumen of grade VG-30) content by weight of total mix and crushed aggregates of grading 2withmixing of agrgregates and VG-30 bitumen in electronic operated 100-120 TPH batch type hot mix plant, transporting the hot mix from HMP to work site by tippers and laying with hyrdostatic paver finisher and as per approved mix and rolled & compacted to required camber and gradient with 8 to 12 tonne smooth wheeled, vibratory and tandem roller, complete all as per Clause 507 MORTH (5th Rev) specification complete all as specified and as directed by Engineer-in-charge. 5 Notes : (i). The contractor shall quotes the rate againstItemconsidering 5.5% VG-30 bitumen content. Job Mix Formula as per CIause. No. 505.3.3 of MORTH (5th Rev) for BC shall be worked out from Thapar Insti. of Engg & Tech. Patiala/ NIT Kurukshetra/ PEC Chandigarh/ CTL for obtaining Optimum Binder Content (OBC) by the Contractor without any financial effect to the Dept and same be submitted to the accepting officer for approval. Any variation in binder content on minus side shall be adjusted @ Rs 50/kg of binder and no adjustment shall be made on plus side.(ii). Cost of filler i.e. cement (Ordinary portland cement/OPC) is deemed to be included in quoted unit rate.(iii).After spreading of mix as per clause 507.4.7 entire surface during the operation shall be rolled with road roller 8-10 tonne (smooth wheeled) followed with vibratory road roller of 8-10 tonne static weight, followed by finished rolling with 6 to 8 tonne smooth wheel tendom roller as per Clause Nos. 507.4.8 and cost of the same is deemed to be included in quoted unit rate. 6 (iv) The vintage of the T&P (Hot mix plant/road roller i.e. vibratory roller, static roller, hydraulic roller/paver) should not be more than 10 years except the tippers and shall be approved by GE before date of commencement of the work.(v) The certificate wrt the capacity of the hot mix plant (HMP) shall be 100-120 TPH and the plant shall be electronic operated, batch type and location be intimated and the same shall be approved by GE before date of commencement of the work.(vi) The distance of the HMP shall not be more than 100 KM from the Mil Stn Patiala, Detail of plant to be submitted to GE for approval before date of commencement of the work.(vii) The calibration certificate for HMP shall be submitted by the contractor for approval of GE before date of commencement of the work which should not be more than 6 months old.(viii) The minimum 2 Road roller each (vibrating and static road roller) are required at site before commencement of the work on the ground and the same shall be approved by GE before date of commencement of the work 7 Repairs to pot holes any depth not exceeding 1.00 Sqm each including sweeping free from dust and mud or water, scouring sunken surfacesin roads, path etc cutting edges at least 25 mm depth and making good by applying tack coat with bitumen @ 5 kg/X Sqm, putting in premix bituminous macadam using paving bitumen of grade VG-30 well rammed and sealed with binder @ 9.80 kg mixed with 0.09 cum of stone chippings 6.3 mm size per 10 Sqm and again well rammed including supply of premixed macadam, binder and chipings, depth of pot holes exe 30mm thick complete all as specified and as directed by Engineer-in-charge. 8 Material and labour for 2.5mm thick road markingthermo plastic reflective paint to be carried out mechanically with hot application of material (painting material @ 5 Kg /Sqm ) and glass beads @ 250 gm/Sqm confirming to CI No. 803.4 of MoRTH in strips of 100/150 mm width on road surfacescomplete all as specified and directed by Engineer-in-Charge.Make : Reliance /Asian /Shalimar 9 Materaial and labour for 5mm thick rumble stirps as road marking with thermo plastic reflective paint to be carried out mechanically with hot application of material (painting material @ 5 Kg /Sqm for each coat of 2.5mm thick ) and glass beads @ 250 gm/Sqm for each coat of 2.5mm thick confirming to CI No. 803.4 of MoRTH in strips of any width on road surfaces complete all as specified and as directed by Engineer-in-Charge.Make : Reliance /Asian /Shalimar 10 Supply and fixing road cat eye of dimenions 89-90X101-102x17mm meeting with ASTM and MoR&TH standards with yellow reflector yellow body colour or any other colour as approved and two side Retroreflective Microprismatic tough Polycarbonate lenscomplete all as specified and as directed by Engineer-in-charge. Note:The studs shall be fixed to the road surface using the epoxy/adhesive conforming to IS, as per manufacturers recommendation complete and as specified and as directed by Engineer-in-charge. 11 Taking down existing brick edging/kerb stones of any size/description/grade of concrete embedding in the ground upto any depths including necessary earth work if required etc complete all as specified and as directed by Engineer-in-charge. 12 Material and labour for laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete including embedding in the ground to depths indicated and tamping ground around and also for removing any surplus spoil to a distance n. exc. 50 mtrs complete all as specified and as directed by Engineer-in-charge. 13 Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400 sqm exc 50 but n. exc. 100 mm deep complete all as specified and as directed by Engineer-in-charge. 14 Material and labour for laying and compacting for 75 mm thick (compacted thickness ) WMM laid in single layer Wet Mix Macadam (WMM) grading as per table 400-13 of MORTH specifications for Road and Bridge works 2013 manufactured in WMM plant material comprising of clean, crushed, graded aggregate and granular material premixed with wate to a dense mass, spreading with sensor paver and rolling with vibratory roller of capacity 80-1OO KN static weight and consolidating to required gradien and camber, the finished surface tolerances to be as per Table 900-1 of MoRTH specifications for Road and Bridge works 2013 complete all as specified and as directed by Engineer-in-charge. 15 Material and labour for preparation of un-surfaced of Wet Mix Macadam (WMM) syrfaces by sweeping, cleaning by power broomers or mechanical sweepers or by brushing with wire brushed for removing caked mud etc removing completely all loose materials and other foreign materials and finally fanning the cleaned surface with air compressors to remove all loose dirt etc and applying a priming/tack coat of paving bitumen of grade VG-10 @ 10 Kg per 10 Sqm for premix bituminous carpet using mechanical sprayer complete all as specified and as directed by Engineer-in-charge. 16 Excavation in trenchesnot exceeding 1.50 metre wide and not exc. 1.5 metre in depth for foundation , laying of pipe etc and getting outas in soft/loose soilcomplete all as specified and as directed by Engineer-in-charge. 17 Returning and filling including spreading leveling , watering and well ramming in layer not exceeding 25cm thick complete all as specified and as directed by Engineer-in-charge. 18 Removing excavated spoil to a distance not exceeding 50 metre and deposting where directed at a level not exceeding 1.5 meterabove the starting point complete complete all as specified and as directed by Engineer-in-charge. 19 Material and labour for concrete bed to450 mm bore/dia drain pipes with cement concrete 1:3:6 type C-2 using 40mm raded stone aggregates including packing under and completely surrounding pipes with concrete after they are laid and tested complete all as specified and as directed by Engineer-in-charge. 20 Material and labour for 450mm bore Reinforced concrete pipes, class NP3, laid and jointed complete with collars complete all as specified and as directed by Engineer-in-charge. 21 Material and labourfor Brick work with old sizefly ash bricks class designation 100,straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge. 22 Material and labour for cementconcrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in benching, coping,stops etc rounded or chamfered on edges complete all as specified and as directed by Engineer-in-Charge. 23 Material and labour for rendering 15mm thick on brick work or concrete surfaces or in chajjas/parapet walls etc in cemet mortar 1:4 finished even and fair without using extra cement complete all as specified and as directed by Engineer-in-Charge. 24 Material and labour for preparation of plastered or unplastered surfaces of walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc and applying two coat of cement base paint over and including a coat of primer complete all as specified and as directed by Engineer-in-Charge. 25 Material and labour for dismantling of existing paver block and re-fixing the same in another or same location including 50mm thick sand cushioningcomplete all as specified and as directed by Engineer-in-Charge. 26 Material and labour for demolition ofcement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness(below or above ground level) complete all as specified and as directed by Engineer-in-Charge. 27 Material and labour for hardcore of broken stone boulders of gauge n exc. 63 mm,deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified. 28 Material and labour for cement concrete 1:4:8type D-2 using 40 mm graded stone aggregates as in foundations, sub-base, flooring,paving etc complete all as specified and as directed by Engineer-in-Charge. 29 Material and labour for laying 80mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand;complete all as specified and as directed by Engineer-in-Charge. 30 Supply and fixing solar road stud/cateye shall be produced from an engineered polymer selected for superior impact resistance and weatherability. The top of the marker should be transparent for solar charging and light output in active mode. The base of the body shall be yellow or neutral white as approed by Engineer In-charge. The marker shall incorporate a solar panel (comprising of solar cells) for converting solar energy into electricity, a storage device for storing the energy, LEDs for illumination and a design for providing 360 degree smooth illumination. The marker shall also have high reflective lenses for conspicuity in passive mode and dual shanks for improved road presence. These markers are intended for application directly onto pavement surfaces and shall be applied with epoxy resin adhesives designed for use with raised pavement markers and as supplied by the marker manufacturer separately. The solar cateye shall be of height: 65 ± 2 mm & Maximum Diameter: 136 ± 4 mm. The body of the solar cateye shall be resistant to dust and water ingress as per IP 65 & IP 68 standards as per testing parameter requirement of MORTH Section 800. The marker shall support a load of 13635 Kg tested in accordance with ASTM D4280. complete all as specified and as directed by Engineer-in-Charge. 31 Supply and fixing 60 cm size Convex Mirror made up of Polycarbonate reflective mirror with unbreakable polycarbonate lens with flat back and body is made of ABS/Fiber/Plastic suitable for outdoor use with hood complete with adjustable fixing bracket, installation kit with nut & bolts/mounting hardware including post of SS 304 Grade Pipe of minimum 65mm bore of suitable height complete all as specified and as directed by Engineer-in-Charge.Make : Pioneer or equivalent as approved.

BRR:8650632 Bids Are invited for Raw Water Transfer Pump - 3 Hp Motor Ss304 , Mineral Dosing System - 0 Point 5 Hp Motor Ss304 , Ro Water Treatment - Multi Stage Water Treatment , Pulping Section - Complete Passion Fruit Pulp Processing , Ss Heating Kettles - Two Stainless Steel Heating Kettles , Cold Storage - Insulated Cold Room , Sugar Syrup Preparation - Ss304 Sugar Syrup Preparation Tank , Sugar Syrup Storage Tank - 1000 L-Stainless Steel Storage Tank , Air Compressor - 10 Hp Low Pressure Air Compressor , Dumping Tank - 300 L-Ss304 Dumping Tank , Blending Tank - 1000 L-Ss304 Blending Tank , Homogenizer - High Pressure 3 Plunger Homogenizer , Storage Tank - 1000 L-Ss304 Vertical Cylindroconical , Pasteurizer - Continuous Tubeintube Pasteurizer , Automatic Rinsing - Automatic Hot Fill Bottling Monoblock , Pet Bottle Blowing - Automatic Pet Bottle Blow Molding Machine , Date Or Batch Coding - Inline Batch Coding Printer For Filled Bottles Up To 4 Lines , L Shaped Conveyor - Heavy Duty L-Shaped Bottle Conveyor For Interconnecting , Box Packing Table - Stainless Steel Table For Final Packaging , Ss Plumbing Line - Ss316 Process Piping Network 2Mm Wall , Steam Boiler - Fully Automatic Diesel Fired Steam Boiler , Electrical Control Panel - Complete Electrical Distribution System , Seed Oil Extraction Unit - Ss304 Jacketed Seed Oil Extractor Vertical Cylindrical Tank , Quality Testing Laboratory Set - Complete Fssai Standard Qa Or Qc Lab Setup For Juice , Effluent Treatment Plant - Compact Wastewater Treatment System 5000 , Clean In Place Cip System - Mobile Cip Unit For Internal Cleaning , Cooling Tower - 50-Tr Cooling Tower All Fluid Contact Surfaces Total Quantity : 29

BRR:8650425 Bids Are Invited For Braided Hose For Exh Brake , Rotary Pto Switch On Off , Housing Friction Clutch , Oil Can , Hose Clamp F3900210 , Rubber Door Glass , Ignition Switch , Safety Element , Rear Hub Oil Inner Seal , Door Lock Assy Lh , Bag Tools And Spare Parts Tool Kit Bag , Speedo Flex Cable , Head Light Assy Low Beam , Screw , Relay Solenoid Eng Starter Electricals , Hose Non Metallic , Stop Light Tail Light Vehicular , Bolt Banjo With Single Hole For Lub , Tail Lamp Rh Lh Commonised , Arenes Control Complete , Hose Clip , S A Of Hose Tank Pump , Nozzle , External Rear View Mirror Right , Wheel Nut Spanner , Directional Light Vehicular , Temp Gauge , Banjo Bolt For Compressor Lub Pipe , Cylinder Head Gasket , Juble E Clip Size No 3 , Flexible Hose Assy , Oil Seal 25X 35X 7 Type B , Horn Assy High Tone , Light Blackout , Oil Seal Od35xid19xw10 , Diaphragm Chamber Brake , Stop Light Vehicular Tail Lamp Vehicular , Clutch Facing Kit Consisting Of 2 Items , Radiator Pipe , Bolt M8x1.25X75 , Cutting Plier , Repair Kit Msp 3 49 Repair Kit 4D , Roof Marker Lamp Rh , Light Marker Clearance Roof Lamp Lh , Jubilee Clip , Rear View Mirror , Clamp Hose , Hose Clamp Total Quantity : 1238

BRR:8650407 Bids Are Invited For Compressor Oils (Q3) Total Quantity : 418

BRR:8650031 Bids Are Invited For Rear Wheel Bearing Tata 2.5 Ton , Gear Box Topper For Tata 2.5 Ton , Exhaust Brake Solenoid For Tata 2.5 Ton , Bearing 50 X 90 X 29 For Tata 2.5 Ton , Sealant Liquid Gasket For Tata 2.5 Ton , Air Dryer With Sp Valve For Tata 2.5 Ton , Steering Gear Box Kit For Tata 2.5 Ton , Unloader Valve Kit For Tata 2.5 Ton , Main Brg For Tata 2.5 Ton , Piston Ring For Tata 2.5 Ton , Hand Brake Cable For M And M Scorpio , Tandem Master Cylinder For M And M Scorpio , Universal Joint Assy For M And M Scorpio , Kit Wheel Cyl Assy Minor For M And M Scorpio , Kit Wheel Cyl Assy Major For M And M Scorpio , Rubber Hose For M And M Scorpio , Suspension Bush Kit For Maruti Gypsy , Knuckle Bearing For Maruti Gypsy , Front Caliper Pad For Maruti Gypsy , Front Wheel Brg For Maruti Gypsy , Steering Gear Box Kit For Maruti Gypsy Total Quantity : 37

BRR:8649985 Bids Are invited for Kilometer Cable , Head Light , Fogg Light , Cabin Shocker , Indicator Light , Head Lamp , Bracket Mounting , Air Compressor Kit , Gear Box Oil Seal , Side Mirror , Speedo Cable , Wind Screen Glass Total Quantity : 33

BRR:8649953 Bids Are Invited For Self Screw Block , Cable PVC insulated elecric cables open bracket heavy dutyas per item description , Switch Piano 5 Amp 230 Volts Flush type one way as per item description , Square Block , Cable PVC insulated elecric cables open bracket heavy duty as per item description , PPR Elbow 20mm , PPR Socket 20mm , Ceiling Rose , PPR Elbow 90 Degre 30mm , PVC casing capping of size as per item description , Teflon Tape Roll , Non Skid Ceramic tiles 300 x 300mm , PPR Socket 32mm , White Cement , Cable PVC insulated electric cables as per item description , PPR Reducer 32 slash 20mm , PPR Reducer Elow 32 slash 20mm , Switch socket combination as per item description , PVC Contention 45cm Long , PVC Switch Board 10 x 8 , Air termination single pointed aluminium rod 12 mm dia and 300 mm long , Aluminium strips 25 x 3.0 mm , PPR Pipe 20mm , Cable PVC insulated electric cables open bracket as peritem description , MCB single pole 10 Ampere capacity B Series as per item description , PPR T PE male Thread , Soap Dish SS , PPR Pipe 32mm , S Trap Viterous China , M Seal 150g Pocket , Brass CP Jet Water Spray , PPR Union 32mm , MCB single pole 32 Amp capacity B Series as per item description , LED Bulk head fitting high pressure die as per item description , Toilet Paper Holder , LED Tube light fittings 20W 230V box type 4 feets with as per item description , Bob Cock 15mm Brass Charminar , Pillar Cock Charminar open bracket Tap for Wash Basin close bracket , Stop Cock Angular 15mm , Shower rose 100mm Dia , Stop Cock T Type Charminar , Looking Mirror 600mm x 450mm , Corner Sheet glass self , Plastic Dustbin 40 Ltr , Gate Valve 32mm , Distribution box 6 Way double door as per item description , Acrylic sheet 8 x 4 x 3mm open bracket as per item desciption , WC European type model 2008 EWC and as per item description Total Quantity :

BRR:8649896 Bids Are Invited For SUPPLY OF WALL MOUNTED INVERTER TYPE 1.5 ΤΟΝ CAPACITY FIVE STAR RATED(as per BEE website) COOLING MACHINE (VARIABAL SPEED) COMPRESSOR TYPE-BLDC RATED ISEER VALUE 5.1 AND ABOVE INPUT POWER SUPPLY 230 VAC (+/-0%) 50 HZ WITH ONE SET HEAVY DUTY MS STAND SUITABLE FOR OUTDOOR UNIT AND ADDITIONAL MATERIAL REQUIRED (EXCEPT STANDARD INSTALLATION MATERIAL) 10 FEET COPPER PIPE, INSULATION, 2.5 SQMM FRLS COPPER FLEXIBLE INSULATED CABLE. NOTE: (1) REQUIRE MINIMUM 10 YRS WARRENTY ON COMPRESSOR AND S YRS WARRENTY ON ALL TYPE OF PCB CIRCUITS AND REST PART OF MACHINE (2) MAKE: DAIKIN, SAMSUNG, LG, BLUE STAR, O General, IFB only (3)OEM/AUTHORIZED DEALER PROOF OF PURCHASE, WARRENTY CERTIFICATE AND TEST REPORT TO BE SUBMITTED ALONG WITH THE MATERIAL SUPLLIED. (4) with 4 KVA Automatic voltage Stabilizer Wall Mounted, input volatage-120V to 250V. Out put voltage 230 voltage Make-V-gaurd, voltas, Bluestar only Low maintenance Lead acid secondary cells for Railway S&T installations, in Hard Rubber OR PPCP container, without maintenance tool kit, as per ROSO IRS:5-88/2004 capacity 2V/80 AH. Accepted Make/Brand-LABCO or EXSID or SOUTHERN MCB 32 AMP DP, 2Pole, Rated voltage-240/415 Volt AC, Rated current 32 AMP, Instantaneous tripping current type C. Confirming to 15/IEC 60898: part 1:2015 or latest. ISI marked, Rated short circuit capacity 10KA. Brand ABB, Indo Asian, Havells, Schneider electric, L&T, Siemens, C&S & Legrand only. MCB 16 AMP DP, 2 Pole, Rated voltage-240/415 Volt AC, Rated current 16 AMP, Instantaneous tripping current type C, Confirming to IS/IEC:60898: part 1:2015 or latest. ISI marked, Rated short circuit capacity 10KA. Brand ABB, Indoasian, Havells, Schneider electric, L&T, Siemens & Legrand only. MCB 10 AMP, Double Pole, Rated voltage-240/415 Volt AC, Rated current 10 AMP, Instantaneous tripping current type C, Confirming to 15/IEC:60898: part 1:2015 or latest. 151 marked, Rated short circuit capacity 10KA. Brand ABB, Indo Asian, Havells, Schneider electric, L&T, Siemens, Legrand only. 5 KVA Inverter 110 VDC/230 V AC to RCF specification no. EDTS-032, Rev-A with annexure to note No.MD/DSS /SPEC/211 dt-25.05.04. Make-As per ICF approved list. MAKE WAVES, HIRECT Total Quantity : 584

BRR:8649717 Bids Are invited for 12 Nos 13 Nos Wrench , 3 In 1 Brinder Tube , Spring 0.5 Inch 0.625 Inch , Manifold Gauge Meter , Swiging Tools , Wire Cutter , Lpg Torch , Hammer Dril Machine , 16Mm Dril B.T , Charging Pin , Rellay Over Load , Brazing Rode , Capacitor 50 Plus Minus 4 Mfd - Capacitor 50 + 4Mfd , Capacitor 4 Mfd , Compressor Clip , R22 Gas , Butane Gas , Clamp Meter , Flare Nut 0.5 Inch 0.625Inch 0.25 Inch , Electric Insalted Gloves , Flex Powder Total Quantity : 84

BRR:8649333 Bids Are Invited For Diaphragm Pumps (Q3) Total Quantity : 8

BRR:8649251 Bids Are Invited For Custom Bid For Services - Operation And Maintenance Of Gas Compressor Station

BRR:8649013 Bids Are invited for Pump Assy Oil , Gasket Oil Pump , Pipe Radiator Outlet , Compressor Assy , Disk Clutch Vehicular , Sa Of Pipe 5 8 Dc Valve To Unloader , Gear Fly Wheel Ring , Dumping Pad , Hose Non Metallic , Hydraulic Pressure Pipe Total Quantity : 13

BRR:8649011 Bids Are invited for Linner Assembly , Piston Assembly , Ring Set , Fuel Filter , Cap Oil Filter , Packing Kit , O Ring Kit , Cr Brg Kit Std , Stud 13Mm , Stud 14Mm , Nozzle , Fuel Pump Single , Valve Set , Head Ring Gkt , Silencer Plange , Digital Meter Total Quantity : 37

BRR:8648788 Bids Are Invited For 963533060000-Diaphragm Total Quantity : 90

BRR:8648762 Bids Are invited for Fuel Feed Pump , Air Compressor Top Post , Steering Pump , Fuel Feed Pump , Ignition Switch , Fuel Pump Assy Total Quantity : 14

BRR:8648752 Bids Are invited for Air Conditioner - 1.5 Ton Capacity Energy Efficiency, This Air Conditioner Consumes Minimal Energy, Allowing You To Stay Cool Efficient Cooling Performance Boasting An Airflow Volume Of Up To 594Cfm, Ideal For Rooms Up To 180Sq.Ft. Plus, Maintaining Its Cooling Efficiency Even At Scorching Temperatures Dependable Hyper Tropical Twin Rotary Compressor Copper Condenser Coil Incorporating R32 Refrigerant , Motorola Sim Based Landline - Hands-Free Speakerphone Gsm Quad Band Frequency Range 850/ 900 / 1800 / 1900Mhz, Battery Back Up Long Rechargeable Battery Life Adjustable Handset Volume Large Phone Book Memory Store Up To 500 Name And Numbers, Contacts Can Also Be Stored On The Sim Card. Backlit Display Sending And Receiving Text Messages Is Made Easier With The Backlit Display Talk Long Hours Without The Hassle Of Holding The Phone With One Hand. , Water Dispencer - Three Separate Faucets For Hot, Cold, And Room Temperature Water. Bottom Loading Design Makes Bottle Replacement Easy & Convenient. Advanced Cooling System Provides Faster Cooling With Low Power Consumption Low Power Consumption Advanced Cooling System Provides Faster Cooling With Low Power Consumption Durable And Corrosion Resistant , Matric Eon 510 - 240X64 Pixels Graphical Lcd With Backlit Intuitive User Interface With Icons, 3.5 Mm Headset Connectivity Multiple Languages Caller Id With Name, Number Call Mute, Call Hold, Call Speed Dial, Call Redial, Call Back, Auto Call Answer, Paging, Call Directory, Call Logs, Call Forward, Call Waiting, Call Transfer, Call Conference Built-In 16 Dss Keys For Feature, Line, Extension , Mirror , Sign Board - 7 Feet Hight Pole With 3 X 2 Sign Board With Multi Colour Printing As Per Office Demand , Invitation Card , Air Conditioner Repair - Air Conditioner Repair Fully Servicing With Parts Replacement If Needed With Gas Refilling And Restarting Asperdemand , 2025 Red Book - Hard Bond Register As Per Our Sample With 85 Gsm Paper 4 Qr Book With Bindin

BRR:8648724 Bids Are Invited For Piston Assy Grade A , Linner Set , Cr Bush , Set Piston Ring , M B Shell Lower Half Normal , M B Shell Upper Half Normal , Thrust Washer Upper , Thrust Washer Lower , Exhaust Valve Rane Evl , Inlet Valve Rane Evl , Valve Guide Seal , Gasket Cylinder Head Mls , Air Packing Kit , Glow Plug Fuse 40 Amp , Seal Crank Shaft , Oil Seal Crank Shaft , Crank Gear Key , Pilot Bearing , Cameshaft Assy With Pin Gear Exhaust , Cameshaft Assy With Pin Gear Intake , Brake Disc Ventilated 4 4 , Air Filter Element , Assy Oil Filter , Pad Sim Indicator Assy , Piston Sleeves , Micro Fuse 10 Amp Total Quantity : 91

BRR:8648723 Bids Are invited for Rocker Arm Inlet , Clutch Lever , Piston Ring , Chain And Sprocket Kit , Gasket Set Eng , Brake Shoe Front , Cush Rubber , Clutch Cable Assy , Ac Regulator , Piston Assy 0.20 Over Size , Main Shaft , Auto Chain Tensioner Assy Total Quantity : 16

BRR:8648699 Bids Are invited for Piston Ring Munite Type Of Tatra 815 - T-815 , Circlip 45X1of Tatra 815 - T-815 , Spring Brake Chamber Of Ashok Leyland Stallion - Stln , Sealing Ring 130X4 Of Of Tatra 815 - T-815 , Sealing Ring H 5003 Of Of Tatra 815 - T-815 , Cylindrical Roller Thrust Bearing Of Tata 2.5Ton - Tata 2.5Ton , Fixing Bracket Assembly Of Ashok Leyland Stallion - Stln , Front Cover Of Tatra 815 - T-815 , Coil System 2-3 Of Tatra 815 - T-815 , Coil System 1-3 Of Tatra 815 - T-815 , Pinion Of Tatra 815 - T-815 , Switch Jacket Of Tatra 815 - T-815 , Csk Screw Of Tatra 815 - T-815 , Spacer Washer Of Tatra 815 - T-815 , Bush Of Tatra 815 - T-815 Total Quantity : 65

BRR:8648630 Integrated Development Of Craft Center At Sambalpur- 1 Earthwork in excavation upto 1.50mtr depth of foundation trenches for columns, basement, tie beams, walls and steps in all kinds of soil including moorum, hard stony earth, earth mixed with boulders etc but not requiring blasting with initial leads and lifts including dressing and leveling the bed sides up to required depth and depositing the excavated materials at places away from the work site with T&P for shoring, shuttering, dewatering if required etc. complete as per the drawing, design including cost of all labour, T&P etc. as required for the work complete as directed by the Engineer-in-charge. 2 Additional cost for Extra lift or 1.5m or part there of over the initial lift of 1.5m in all kinds of embankments and road works and ordinary earth work in general. 3 Filling foundation trenches and plinth with excavated earth including laying the earth in layers not exceeding 23.5cm (9”) thick ramming and watering with all leads and lifts including cost of all labour, T&P etc. complete as directed by the Engineer-in-charge. 4 Supplying and filling the Foundation & Plinth with clean coarse river sand of approved quality from approved quarry, laying in layers not exceeding 150mm thick, watering and ramming including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge. 5 Providing & laying cement concrete of prop. (1:3:6) in foundation bed and floors using 40mm nominal size down graded, screened, washed hard black crusher broken granite metal of approved quality & from approved quarry including laying in the layers not exceeding 100 mm thick, hoisting, lowering, laying, watering and curing etc. complete to the required levels including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for the work complete and as per direction of Engineer-in-charge. 6 R.C.C. work ofM-25 for foundation having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. 7 R.C.C. work ofM-25 for plinth beam having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. 8 R.C.C. work ofM-25 for beam & column having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. 9 Ground Floor 10 R.C.C. work ofM-25 for lintel having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. 11 Ground Floor 12 R.C.C. work ofM-25 for roof slab having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. 13 Ground Floor 14 R.C.C. work ofM-25 for slope roof having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. 15 Ground Floor 16 Providing & fixing TOR Fe-500 D grade reinforcement bars of approved makes as per DTCN for RCC work of required diameter with straightening, cutting, bending, binding welding and joining (if necessary) and tying the grills and placing in position as required for R.C.C. work and providing fan hooks, hoisting, lowering and laying including cost, conveyance and taxes of tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all heights as per the drawing, design and direction ofEngineer-in-charge. (Linear measurements will be taken & quantity will be calculated on standard weight. Weight of binding wire will not be considered for measurement.) 17 Ground Floor 18 Brick work in foundation and plinth with flyash bricks in cement mortar (1:6) with best quality bricks having crushing strength not less than 75 Kg/cm2 immersing the bricks in water for not less than 6 hours before use (the bricks shall be well burnt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes molding, chamfering, corbelling .complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer in charge. 19 Brick work in superstructure with flyash bricks in cement mortar (1:6) with best quality bricks having crushing strength not less than 75 Kg/cm2 immersing the bricks in water for not less than 6 hours before use (the bricks shall be well burnt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes molding, chamfering, corbelling .complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer in charge. 20 Ground Floor 21 Brick work in superstructure with flyash bricks in cement mortar (1:4) with best quality bricks having crushing strength not less than 75 Kg/cm2 imersing the bricks in water for not less than 6 hours before use (the bricks shall be well burnt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes molding, chamfering, corbelling .complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer in charge. 22 Ground Floor 23 Providing vitrified tile flooring using double charged vitrified tiles of premium grade having thick of 8mm to 10mm conforming to IS 13756 of 600mmx600mm coloured /printed series (homogeneous) of approved quality, colour in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with epoxy grout with required quantities of pigments of approved marks to match the shades of the vitrified tile if requiredwatering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work, complete in all respect as per specification and direction of Engineer-in-charge. 24 Ground Floor 25 Supplying, fitting and fixing of double charged vitrified tiles in skirting of premium grade having thickness of 8mm to 10mm conforming to IS 13756 of 600mmx600mm coloured /printed series (homogeneous) of approved quality, colour of approved quality and size in dadoes in all floors at all heights and riser of steps on 12mmm thick cement plaster (1:3) using screened and washed sharp sand for mortar with grouted Epoxy grout to match the shade of the tiles including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, curing-sundries and T&P, etc. required for the work complete as per specification and direction of Engineer-in-charge. 26 Ground Floor 27 Providingtile flooringexterior gradevitrified tiles of premium grade 10mm thick conforming to IS 4457 of 300mmx300mm of approved quality, colour in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with epoxy grout with required quantities of pigments of approved marks to match the shades of the vitrified tile if requiredwatering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work, complete in all respect as per specification and direction of Engineer-in-charge. 28 Ground Floor 29 Providing 40cmx40cm sizespecial plain/printed series matt finish ceramic floor tiles of premium grade of approved make having thickness 7mm to 8mm, conforming to IS 13755 for ceramic tileflooring of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient, grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the ceramic tile if required , watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work, complete in all respect as directed by the Engineer-in-charge. 30 Ground Floor 31 Providing 30cmx60cm size special plain/printed seriesedge cut ceramic wall tiles of premium grade of approved make having thickness 6.5mm to 6.7mm conforming to IS 13753 of approved make & shade in Dadoes over 12mm thick cement plaster 1:3 (1 Cement: 3 Coarse sand) finished with modular pointing in white cement & pigment to match the shade of the tiles including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour curing sundries and T & P etc. required for the work etc. complete as per specification and direction of Engineer-in-charge. 32 Ground Floor 33 Providing 20mm thick and above 0.40 Sqm size granite stone flooring in staircase of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if requiredwatering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge. 34 Ground Floor 35 Providing and fixing in position well dressed, naturally seasoned sal wood rebated frames of size 125mmx63mm to doors including two coats of hot bitumen applied to rear of frame in contact with masonry or concrete surface fixed with MS hold fast of 35x5mm embedded in cement concrete blocks 15x10x10cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) complete with all materials, labours, T & P including cost, conveyance, loading, sundries required for the work etc. complete in all respect as directed by the Engineer-in-charge 36 Supplying fitting and fixing in position 32mm thick flush door with teak wood beading and 1mm thick sunmica to both side pasted with adhessive including fixing of fixtures like Godrej make Mortice lock having model no 9168, Godrej make Door closure having model no 8340, 100mm aluminium hinges, handle, tower bolt, stopper including cost of all materials, labour, all taxes, transportation, loading & unloading etc. complete as per specification and direction of Engineer -in-charge. 37 Providing and fixing in position WPC frames of following approved size to doorsfixed with MS hold fast of 35x5mm embedded in cement concrete blocks 15x10x10cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) complete with all materials, labours, T & P including cost, conveyance, loading, sundries required for the work etc. complete in all respect as directed by the Engineer-in-charge. 75mm x 50 mm 38 Providing and fixing in position 28mm thick WPC shutters of approved size to WPC door frames with hinges, handles, tower bolt etc complete with all materials, labours, T & P including cost, conveyance, loading, sundries required for the work etc. complete in all respect as directed by the Engineer-in-charge 39 Providing and fixing lockable openable system Aluminum works for openable doors applications. The extruded aluminium sections should be made from Grade 6063-T5 & Anodized with Tex guard coating, silicon coated to suit marine atmosphere. All profiles should be Non insulated Profiles. Corner connection will be Butt joint with Screw using Nano gaskets for sealing. All other major accessories should also be made by the same manufacturer. All panels will have no visible hinge or connecting hardware and shall not be connected on any side of the outer frame. The outer frame Depth will be 72mm. All materials which are used should be corrosion-resistant so that they are good functioning in different environments and that there are no negative influences either on the aluminium or on the surface treatment. Glass to be used is 6mm – 8mm toughened, make Saint Gobain. The system should allow the application of glazing or panels with thickness up to 5-8mm. System should have a 10-year warranty on properties, functionality and design, within restrictions defined by technical specifications of anodizing & 1year warranty on wearing parts 40 Providing and fixing Anodized System Aluminum three track Sliding glazed windows of TOSTEM / SHUECO/ ALUMIL make suitable for 2.4 KPA windload with 50mm visible aluminium section width in the centre interlock. The system offered must be ride-in system with two glass panels moving inside the channel without any external overhung along with a provision for mesh panel on the third track. The extruded aluminium sections should be made from Grade 6063-T5 & Anodized with Texguard coating. Corner connection will be Butt joint with using Nano gaskets for sealing. All other major Accessories should also be made by the same manufacturer. All Slider doors & windows will be centre locking with integrated Anti-lift in slider panel. Only EPDM gaskets should be used in all meeting points instead of Brush Pile. The outer frame Depth will be 104 mm +/- 3 mm The bottom frame must use a subframe and no direct grouting will be permitted on bottom frame directly. All glasses will be 5- 6 mm clear toughened.The system should allow glass thickness up to 10 mm. The system should qualify Airtightness ASTM E283: 10.7m3/h.m2 at 75Pa of pressure, Water tightness ASTM E300: 240 Pa, Wind load resistance ASTM E330: 2400 Pa. 41 Providing and fixing Anodized System Aluminum fixed windows of TOSTEM / SHUECO/ ALUMIL make, suitable for 2.4 KPA wind load. The extruded aluminium sections should be made from Grade 6063-T5 & Anodized with Tex guard coating. Corner connection will be Butt joint with using Nano gaskets for sealing. All other major Accessories should also be made by the same manufacturer. Only EPDM gaskets should be used in all meeting points instead of Brush Pile. The outer frame Depth will be 72 mm +/- 3 mm. All glasses will be 6 - 8 MM toughened depending on grid size. Beyond 6000 mm width, MS section (size 61 x 122 mm) coupling to be used with cover profiles of same anodized colour. The system should qualify Airtightness ASTM E283: 10.7m3/h.m2 at 75Pa of pressure, Water tightness ASTM E300: 240 Pa, Wind load resistance ASTM E330: 2400 Pa. 42 Providing and fixing Anodized System Aluminum glass louvers of TOSTEM / SHUECO/ ALUMIL make natural air flow ventilators. The extruded aluminium sections shall be made from Grade 6063- T5 Anodized with Tex guard coating. All other major Accessories should also be made by the same manufacturer. Only EPDM gaskets should be used in all meeting points instead of Brush Pile. The outer frame Depth will be 50 - 72 mm. System should have a 10-year warranty on properties, functionality and design, within restrictions defined by technical specifications of anodizing & 1-year warranty on wearing parts. 43 Supplying, fitting and fixing of M.S window grills ( as per I.S. specification and as per approved drawings ) in proper position in all floors and at all height including making holes to brick walls/ R.C.C structure/wood work etc. and making good to the damagedwalls/ structures with cement concrete (1:2:4)with black hard crusher broken granite stone chips of 12mm to 20mm size ( 20mm size not to exceeds 25% ) including watering and curing etc. complete in all respect as directed by the Engineer in charge. 44 Supplying, fitting and fixing of M.S grill gates with top and bottom rails (as per I.S. specification and as per approved drawings) in proper position in all floors and at all height including making holes to brick walls/ R.C.C structure/wood work etc. and making good to the damagedwalls/ structures with cement concrete (1:2:4)with black hard crusher broken granite stone chips of 12mm to 20mm size (20mm size not to exceeds 25%) including watering and curing etc. complete in all respect as directed by the Engineer in charge. 45 Supplying, Fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mmx32mmx2mm @ 0.90mtr C/Cand stainless square pipe bracing of size 32mmx32mmx2mm in 3 rows in stair case as per approved design and specification buffing polishing etc with cost conveyance taxes of all materials labour T&P etc required for the complete in all respect. 46 Providing & fixing of Greenlam Sturdo Essentia Collection- Serene Restroom Cubicle (of following standard dimension which includes 600mm door size width) self-supporting 12mm thick compact laminates made out of, urea free, thermosetting phenolic resins treated Kraft papers as core material and Amino plastic resin treated decor papers on the finish surface, conforming to latest and applicable IS: 2046-1995, EN 438:2016 and NEMA LD3-2005 quality standards with Antivirus, Antibacterial and Antifungal properties (conforming to ISO 21702:2019, JIS Z2801:2010 and ASTM G21-2015 standards respectively) to fulfil the applicable requirements of indoor air quality certifications for Greenguard-Gold standards. This also includes providing and fixing in position necessary hardware made out of Nylon Polyamide grade 6 & Aluminium alloy grade 6063-T6 powder coated finish in black and other available color hardwares as per manufacturers specifications & Architects instructions like (1) Self closing hinges in Nylon Polyamide grade 6 in gloss finish in available colors (2) Soft closing thumb turn lock made in nylon polyamide grade 6 in gloss finish in available colors (3) Single Coat hook in nylon polyamide grade 6 in gloss finish, available in similar available colors (4) U & F- profiles in Aluminium alloy grade 6063-T6 with powder coating in available colors (5) Nylon polyamide grade 6 Adjustable Leg (6) Top rail along with Nylon Polyamide grade 6 with end cap is a Round D shaped extrusion made of Aluminium alloy grade 6063-T6 with Powder Coating in available colors, (7) Rubber, (8) Screws & wall Plugs (SS316). The top fitting should consist of Matt finish aluminium alloy grade 6063-T6 in avilable colors, which will get fixed on pilasters with SS Screws, All screws will of 316 Grade in stainless steel. All pilasters are supported by grade- 6 Nylorn Polyamide Thermoplastic palm design pedestal footing with non corrosive steel inserts. The base anchored to the floor with grade 316 satin finish stainless steel screws with push fit capping at a clearance height of 150mm. Toilet Cubicle Partitions with standard dimensions of 1995mm Height x 1000mm Width x 1500mm Depth (which includes 600mm door width) 47 Providing 12mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) finished smooth to inside smooth surface of brick masonry walls after racking out the joints including watering and curing, rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge. 48 Ground Floor 49 Providing 12mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) finished smooth to outside smooth surface of brick masonry walls after racking out the joints including watering and curing, rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge. 50 Ground Floor 51 Providing 6mm thick plaster in C.M. (1:4) over ceiling, chajja, loft, staircase, column, beams and walls after removing the false if necessary and close deep chipping including rounding of the corners, recess and roughening concrete surface where necessary, watering and curing, finished smooth over R.C.C. surface, including cost, conveyance, royalty, taxes of all materials, cost of all labour, T&P etc. complete as per direction of the Engineer-in-charge. 52 Ground Floor 53 Finishing wall surface with Acrylic wall putty to inside surface of approved make and finished smooth and even surface to receive painting to inside surface including cost of scaffolding staging charges with cost of all materials taxes, labour T & P etc complete as per direction of Engineer-in-charge. 54 Ground Floor 55 Finishing wall surface with Acrylic wall putty to outside surface of approved make and finished smooth and even surface to receive painting to inside surface including cost of scaffolding staging charges with cost of all materials taxes, labour T & P etc complete as per direction of Engineer-in-charge. 56 Ground Floor 57 Providing and painting two coats with plastic emulsion paint over a coat of primer of approved quality and approved shade in all floors at all height by making the surface to the interior plastered surface of wallsmooth including cost, coveyance, loading and unloading and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge. 58 Ground Floor 59 Painting to external surface of building with two coats of weather coat over a coat of primer of approved shade and quality of approved design, after cleaning by watering & removing the dirts etc. to the surface to be painted including watering, curing, cost, conveyance and taxes of all materials, cost of all labour, brushes, T&P etc. and necessary scaffolding work complete as directed by the Engineer-in-charge. 60 Ground Floor 61 Providing and painting two coats with synthetic enamel paint over a coat of red oxide primer of approved quality and approved shade confirmming to ISI on steel work to give an even shade in all floors at all height including sand papering and making the surface smooth with cost, coveyance, loading and unloading, and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by Engineer-in-charge. 62 Ground Floor 63 Providing 25mm thick grading concrete in C.C. (1:2:2) laid in proper slope over terrace roof slab by using two part of sand, one part of cement and two parts of6mm size black hard crusher broken granite chips with addition of water proofing compound of approved quality to be mixed with specified ratio including watering, curing, cost, conveyance, royalties, taxes of all materials, cost of all labour, T&P etc. complete as required for the finished item of work as directed by the Engineer-in-charge. 64 Ground Floor 65 Providing 20mm. average thick grading plaster with cement mortar of mix (1:4) in all floors at all height with portland slag cement on top of roof slab after chipping and chiseling the same and cleaning the entire surface with wire brush, finished smooth to proper slope and gradient with watering and curing etc. complete including cost, coveyannce, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P required for the work etc. complete in all respect as directed by the Engineer in charge. 66 Ground Floor 67 Providing and applying 2 coats of 1mm thick elastomeric cementitious waterproofing coating Brushbond RFX of Fosroc Chemicals Tested to ASTM D4060, ASTM D4541, ASTM D638, ASTM C836. with Adhesion to concrete : >1N/mm2for waterproofing structures like roof slabs, sunken slabs, chajjas, tunnels, water tank etc. after proper surface preparation and soaking the surface with water prior to application complete as specified and directed by the Department at all levels. 68 Providing kota stone flooring using Rajasthan kota stone of approved quality, colour and size of 25mm minimum thick in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the kota stone with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the kota stone, if required , watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge. 69 25 mm. average thick artificial stone flooring with cement punning laid to proper slope with cement concrete of proportion (1:2:4) using screened and washed sharp sand for mortar with black hard crusher broken granite stone chips of approved quality and from approved quarry, washed and cleaned laid in two layers i.e. the bottom layer being 19 mm . thick and top layer of 6mm. thick with 12mm. to 20. size black hard crusher brokenstone chips (20mm size chips not to exceed 25%) including chipping and chiseling and cleaning the top surface of the floor slabs in upper floors, including rounding of corners, watering and curing with cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as directed by the Engineer-in-charge 70 Providing and injecting chemical emulsion for pre - constructional antitermite treatment as per IS specification and creating a chemical barrier in bottom and sides of foundation trenches, top-surface of plinth filing junction of walls and floors along with external perimeter of the building expansion joints surrounding the pipes and cables etc. complete using approved quality of chemical emulsion of requisite quantity prescribed by the manufacturer as directed by the Engineer-in-charge including cost of all materials and labour taxes etc. complete. (indemnity bond for warranty for 5 years to be furnished) 71 Supplying all labour, T&P for the Carriage of excavated earth by mechanical means of transport within 5.00 K.M. lead including hire and running charges of vehicles, labour charges for loading and unloading as required for the work etc. complete as per the direction of the Engineer-in-charge. 72 Rolling & compacting to sub grade or formation loosening by cutting earth for 15cm below the sub grade including watering and compacting in layers by PRR, cost & conveyance of required quantity of water, cost of all labour sundries, T & P etc. required for the work to complete in all respect as per specification and direction of Engineer-in-charge. 73 Construction of granular sub-base by providing Close graded Granular subbase Grading-IV material as per table 400-1, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density complete as per Clause 401 of MoSRT&H Specifications for Road & Bridge works (5th Revision) etc complete as per direction of Engineer-in-charge. 74 Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, laying in uniform layers with paver in subbase/base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per Clause 406 of MoSRT&H Specifications for Road & Bridge works 75 Supplying and laying of M40 grade heavy duty factory made hydraulically pressed and mechine vibrated free cast interlocking pavers of 80mm thick, coral shaped preparation of sub base with 50mm sand and leveling,laying of interlocking paver block with sand binding and final compaction with plate vibrator finishing the surface including cutting of blocks at the edges with all labour and materials etc complete as per direction of Engineer-in-chrge. 76 Providing and laying at or near ground level factory made kerb stone of M-30 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). 77 Providing and painting two coats with synthetic enamel paint over a coat of cement primer of approved quality and approved shade confirmming to ISI on cement work to give an even shade in all floors at all height including sand papering and making the surface smooth with cost, coveyance, loading and unloading, and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by Engineer-in-charge. 78 Painting runway/taxi track/apron marking with adequate nos of coats to give uniform finish with road marking paint of superior make as approved by the Engineer-in-charge, i/c cleaning the surface of ail dirt, scales, oil, grease and other foreign material etc. and lining out complete. 79 Providing and applying 2.5 mm thick road marking strips (retroreflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. 80 Providing and fixing Glow studs of size 100x20 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite ) or HIP (High impact polystyrene) or ABS having electronically welded micro- prismatic lens with abrasion resistant coating as approved by Engineer in charge. The glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The slope of retro- reflective surface shall be 35 (+/-5) degress to base .The reflective panels on both sides with at least 12 cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as recommended in BS: 873part 4 : 1973. The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-charge 81 Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001 82 Mandatory/ Regulatory sign boards of 900 mm diametre with support length of 3750 mm 83 Cautionary /warning sign boards of equilateral triangular shape having each side of 900 mm with support length of 3650 mm 84 Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-incharge.( Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). 85 Providing Retro-reflective regulatory sign board of size 900 mm dia meter made out of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated lens type retro -reflective sheeting as approved by Engineer-in-charge . Letter, symbols, borders etc. will be as per IRC - 67 with required colour scheme on the boards and with the high intensity grade A. The aluminium sheet to be riveted to M.S. frame of angle iron of size 40x40x4 mm. The boards will be fixed to 1 No. 50x50 mm square post made of M.S. angle 50x50x4 mm, 4 m long welded to the frame with adequate anti-theft arrangement .Sheet work to be painted with two or more coats of synthetic enamel paint over an under coat (primer) and back side of aluminium sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete in all respects as per direction of Engineer-in-charge. 86 Providing and fixing post delineators made of ABS round body fitted with 2 nos 100 mm dia high reflective reflectors and mounted on MS pipe of 65 mm dia duly powder coated anti-rust and anti theft steel to be installed as per direction of Engineer-in-charge. 87 Plastic Waste bin Rectangular alongwith fabricated MS stand with one coat of primer and two coats of enamel paint for stand. MS stand should be grouted properly on the ground level. Capacity-60 350x350 mm Top Dia.250x250 mm Bottom Dia.850 mm Height pair Sintex, Nilkamal, Otto, Aristo 88 Plastic Waste bin without Wheel with Push type Top load along with fabricated MS stand with one coat of primer and two coats of enamel paint for stand. MS stand should be grouted properly on the ground level capacity 60 pair 350x350 mm Top Dia. 250x250 mm Bottom Dia. 850 mm Height Sintex, Nilkamal, Otto, Aristo 89 Plastic Waste bin without Wheel with Swing lid type Top load along with fabricated MS stand with one coat of primer and two coats of enamel paint for stand. MS stand should be grouted properly on the ground level. Capacity-60 pair 350x350 mm Top Dia. 250x250 mm Bottom Dia. 850 mm Height Sintex, Nilkamal, Otto, Aristo 90 Trenching in ordinary soil upto a depth of 60 cm including removal and stacking of serviceable materials and then disposing of by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge of land manure before and after flooding trench with water (excluding the cost of imported earth, sludge or manure). 91 Supplying and stacking of good earth at site (Earth measured in stacks will be reduced by 20% for payment) with all lead and lift. 92 Supplying and stacking sludge at site (sludge measured in stacks will be reduced by 8% for payment) with all lead and lift. 93 Supplying and stacking at site dump manure fromdumping place nearest to site of work.(manure in stack will be reduced by 8% for payment) with all lead and lift. 94 Screened through sieve of I.S designation 20 mm. 95 Screened through sieve of I.S designation 16 mm. 96 Screened through sieve of I.S designation 4.75 mm. 97 Rough dressing the trenched ground including breaking clods. 98 Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of up rooted vegetation with all lead and lift. 99 Fine dressing the trenched ground. 100 Spreading of sludge, dump manure or land good earth in required thickness. (Cost of sludge, dump manure or/and good earth to be paid separately). 101 Mixing earth and sludge or manure in proportion specified or directed. 102 Providing & laying Selection no. 1 grass turf with earth 50mm to 60mm thickness on existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same, as per direction of officer in charge 103 Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge. 104 Renovating lawns including weeding, cheeling the grass, forking the ground, top dressing with sludge or manure, mixing the same with forked soil, watering and maintaining the lawn for 60 days or more till the grass forms a thick lawn free from weeds and fit for mowing and disposal of rubbish as directed, including supplying good earth if needed but excluding the cost of sludge or manure (The manure/sludge shall be paid for separately). 105 Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) 106 Holes 60 cm dia, and 60 cm deep 107 Holes 45 cm dia, and 45 cm deep 108 Preparation of mounds of various size and shape by available excavated / supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer-in-charge. 109 Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 7 Nos ( 3 nos horizontal & 4 nos vertical “ U “ shape) M.S. wires of 3.5 mm dia as per design, including required form work, finishing with cement punning on exposed surface, curing for specified period and stacking in required rows & height, all complete as per direction of Officer-in-charge.Top inside dia 35 cm, outer bottom dia 25 cm, total height 35 cm with wall thickness of 25.4 mm 110 Filling of the following size empty pots with mixture of good earth & manure in the ratio of 2:1 (Two part of Good earth & one port of manure) and placing them on appropriate place i/c carriage of earth, manure and pots up to 50 mtr, as per direction of officer incharge. (The cost of good earth, earthen pots & manure will be paid separately.) Size of Empty Pots 35cm Top dia, 25cm Bottom Dia & 35cm Perpendicular height. 111 Anti termite treatment by digging pits 30 cm deep and 4 cm dia, 6 to 7 holes around the tree using chemical emulsion at the rate of 1.5 liter per hole in two time or more application to get the trees free from termite infection chemicals used Chlorpyriphos 20% EC in the ratio of 1% concentration and as per direction of officer-in-charge. 112 Anti termite treatment of lawn area through premise 30.50% I P. one liter premise diluted in 499 liters water and applying solution @ 1.00 litre solution per sqm lawn or bed area.(two application) i/c cost of chemical)and as per direction of officer-in-charge.and as per direction of officer-in-charge. 113 Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water) 114 Trees Plant 115 Shrubs Plant 116 Hedge Plant 117 Providing and displaying of Aglaonema dove variety Plant, having ht. 30 cm to 45 cm with 8 to 10 leaves, well developed, fresh and healthy in 25 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge. 118 Providing and displaying of Aglaonema Snow-White hybrid plant (three in one), having ht. 30 cm & above with 6 to 8 leaves, bright colour, well developed, fresh and healthy in 25 cm size of Earthen pot / Plastic pot . (Specimen Plant) & as per direction of the officer-in-charge. 119 Providing and displaying of Areca Palm plant, having ht. 90 cm to 1.20 m with 4 to 5 suckers, well developed, fresh and healthy with lush green foliage in 20 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge. 120 Providing and displaying of Croton Challanger variety plant, having ht. 30cm and above, well developed with full of fresh and healthy leaves in 20 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge. 121 Providing and displaying of Croton Baby Golden plant (three in one), having ht. 30cm, multi branches, well developed with fresh and healthy foliage in 25 cm size of Earthen pot / Plastic pot. as per direction of the officer-incharge. 122 Providing and displaying of Dracaena Song of India plant (three in one), having ht. 30 cm and above, multibranched, well developed with fresh and healthy leaves in 25 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge. 123 Providing and displaying of Money Plant Broad Leaves mounted on moss stick 90 cm ht., 3 to 4 plants in each pot, well developed with full of fresh & healthy leaves in size of 25 cm Top dia x 18 cm Bottom dia x 25 cm Perpendicular height Earthen pot / Plastic pot . & as per direction of the officer-in-charge. 124 Providing and displaying of Phoenix palm plant, having ht. 75 cm to 90 cm with 10 to 15 or more leaves, well developed, fresh and healthy in 25 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge. 125 Providing and Displaying plants Cladium Hybrid variety 3 to 4 plants in a pot well developed with fresh & healthy foliage 30 to 45 cm ht. in different colour 25 cm Earthen Pot/Plastic Pot and as per direction of the officer incharge. 126 Providing and Displaying plants Cosmos well developed fresh & healthy 20 to 25 cm ht. attractive colours multi branching at blooming stage in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. 127 Providing and Displaying plants Creeper Rose variety 3 to 4 healthy branch 60 cm and above ht. well developed with one and above flowers in 25 cm Earthen Pot, as per direction of the officer-in-charge. 128 Providing and Displaying plants Standard Rose (H.T. variety) 3 to 4 healthy branch 90 cm and above ht. well developed with one and above flowers in 25 cm Earthen Pot, as per direction of the officer-in-charge. 129 Providing and Displaying Acalypha green plant well developed, fresh & healthy with good foliage, multi branch 30 to 45 cm ht. in 20 cm size Earthen Pot/ Plastic Pot bushy plant as per direction of the officer-in-charge. 130 Providing and Displaying Bamboo Buddha vally variety with umbrella shape plant having 120 to 135 ht. with fresh & healthy foliage well developed in 40 cm Cement pot multy branch, bushy plant as per direction of the officer-in-charge. 131 Providing and Displaying Fishtail palm plant well developed with fresh & healthy foliage leaves of ht 210 to 240cm Specimen plant in 35 cm Cement Pot as per direction of the officer-in-charge. 132 Providing and Displaying Foxtail palm plant well developed with fresh & healthy foliage of ht. 210 to 240 cm in big 40 cm Cement Pot as per direction of the officer-in-charge. 133 Supply and stacking of Acacia auriculiformis plant of ht 150-165 cm in bag size of 25 cm as per direction of the officer-in-charge. 134 Supply and stacking of Adansonia digitata (kalp vricksh) plantof ht 150-165 cm in bag size of 25 cm as per direction of the officer-in-charge. 135 Supply and stacking of Azadirachta indica ( Neem ) plant of height 120-130cm in big polybag of size 25 cm as per direction of the officer-in-charge. 136 Supply and stacking of Bottle palm plant of ht. 210-240 cm bottom girth 30-35 cm well developed in big HDPE bags. 137 Supply and stacking of Casuarina equisetifolia plant of height 150-165 cm in big poly bags of size 25 cm as per direction of the officer-in-charge. 138 Supply and stacking of Ficus nuda plant of height 120-135 cm. with 6-8 branches and lush green foliage in g. bags of size 25 cm as per direction of the officer-in-charge. 139 Supply and stacking of Nauclea cadamba (Kadam) plant of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge.v 140 Supply and stacking of plant Bauhinia acuminata height 60-75 cm. in earthen pots of size 20 cm as per direction of the officer-in-charge. 141 Supply and stacking of plant Ficus panda of height 60-90 cm, with 8-10 branches, and healthy foliage, bushy in big size HDPE bag as per direction of the officer-in-charge. 142 Supply and stacking of plant Hibiscus rosasinensis of height 45-60 cm. with 3-4 branches in earthen pots of size 20 cm as per direction of the officer-in-charge. 143 Supply and stacking of plant Nerium oleander (kaner) dwarf of height 30-40 cm. in earthen pot of size 20 cm as per direction of the officer-in-charge. 144 Supply and stacking of plant Thuja compacta of height 75-90 cm., conical shaped, well formed with healthy foliage in earthen pots of size 30 cm as per direction of the officer-in-charge. 145 Supply and stacking of Jasminum humile (Yellow) plant of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. 146 Providing and fixing overhead type sprinkler system with self closing valve type 25mm X 20mm with self closing springmade up ofalluminium alloy and brass fittings including cost of all materials, labour, T & P etc complete as per direction of Engineer-in-charge. 147 Supplying all materials, labour, T&P and fixing 15mm dia CPBib cock of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. Make: Jaquar/Grohe/Johnson/Roca 148 Supplying all materials, labours, T&P and fitting and fixing of the 20mm dia CPVC pipeconfirming to IS 15778 certification mark with socket and screw joints in walls and floors including supplying of required number of fittings of approved make including cutting threads to pipes and pipes to length, including wastage,etc for fitting to the walls with supply of holder ats, clamps, fixing wooden plugs in walls, including testing of pipe line for water tightness complete as per IS specification including cost, conveyance and taxes of all materials all complete as per PH specification and direction of Engineer-in-charge. (Concealed) 149 TOTAL FOR CIVIL WORKS-(A) 150 PH WORKS 151 Supplying all materials, labours, T&P for fitting and fixing white glazed vitreous china floor mounted European water closet of Hindware make having cat no 20087 or equivalent type of approved make including supply of matching P/S trap to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete including cost of WC pan, PVC seat cover with CP brass hinges and rubber buffers etc all complete including cost, taxes and conveyance as per specification including polishing etc all complete as per PH specification and direction of Engineer-in-charge. 152 Supplying all materials, labours, T&P for fitting and fixing white glazed vitreous china wall mounted European water closet of Hindware make having cat no 20098 or equivalent type of approved make including supply of matching P/S trap to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete including cost of WC pan, PVC seat cover with CP brass hinges and rubber buffers etc all complete including cost, taxes and conveyance as per specification including polishing etc all complete as per PH specification and direction of Engineer-in-charge. 153 Supply all materials, labour,T&P for fitting and fixing of Pneumatic tank 3/6L with full frame andPneumatic faceplate in polished chrome of Jaquar make having cat no 517444 and 525732 or equivalent type of approved make complete with all parts and internal fittings of approved make with ISI mark and supplying of necessary brackets, screws etc 32mm dia flush bend, connecting pipe with CP or brass union nuts at each end as per PH specification all complete as per direction of Engineer-in-charge. 154 Supply all materials, labour,T&P for fitting and fixing of dual flush PVC cistern of hindware sleek essence make or equivalent type of approved make complete with all parts and internal fittings of approved make with ISI mark and supplying of necessary brackets, screws etc 32mm dia flush bend, 15mm dia 450mm long PVC water connecting pipe of jaquar make having cat no ALD 803AB with CP or brass union nuts at each end as per PH specification all complete as per direction of Engineer-in-charge. 155 Supplying all material, labour T&P and fixtures for providing and fixing of white glazed vitreous chinaware counter top wash hand basin of size 49cm dia of Hindware make having cat no 10052 or equivalent type of approved make with bottle trap of Jaquar cat no ALD 769L250x190 with CP waste coupling nut of Jaquar make having cat no ALD 709 and 15mm x 450mm PVC connection pipe of Jaquar make having cat no ALD 803AB with MS bracket with wooden plugs CP screws including cost of cement, sand, labour, T&P etc. complete including testing cost, conveyance, royalty and taxes of all materials etc. complete as per PH specification and direction of Engineer-in-charge. 156 Supplying and fixing urinal of hindware make having cat no 60022/60023 or equivalent type of approved make including all fittings like 450mm long connection pipe of Jaquar make having cat no ALD 803B, waste pipe etc of approved make etc complete as per PH specification and direction of the Engineer-in-charge. 157 Supplying and fixing 12mm thick toughened glazed urinal division plate of approved size with etching and polishing including concrete grouting and edge moulding etc complete as per PH specification and direction of the Engineer-in-charge. 158 Supplying all materials, labor T&P for fitting and fixing in all floors fixed type glass mirror of size 600mm x 450mm best INDIAN make of 5.5 mm thickness with supply of 13mm thick asbestos backing and wooden plugs C. P. Brass screw including cost, conveyance, royalty, taxes of all materials complete as per P.H. specification and direction of Engineering-in-charge. 159 Supplying all materials, labour, T&P and fixing standard sized15mm dia Concealed Stop cock of Jaquar Cat. No.-FLR 5083NK or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 160 Supplying all materials, labour, T&P and fixing standard sized15mm dia Angular Stop cock of Jaquar Cat. No.-FLR 5053N or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 161 Supplying all materials, labour, T&P and fixing standard sized15mm dia pillar cock of Jaquar Cat. No.-FLR 5015 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 162 Supplying all materials, labour, T&P and fixing two way Bib cock of Jaquar Cat. No.-FLR 5041N or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 163 Supplying all materials, labour, T&P and fixing health faucet of Jaquar Cat. No.-ALD 573 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 164 Supplying all materials, labour, T&P and fixing standard sizedCP towel ring square of Jaquar Cat. No.-ACN-1121N or equivalent etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 165 Providing and fixing C.P. Glass shelf 600mm long of Jaquar Cat. No.-ACN-1171N or equivalent type of approved make fixed to wall including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 166 Supplying all materials, labour, T&P and fixing standard sizedCP Soap case of Jaquar Cat. No.-ACN-1131N or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 167 Supplying all materials, labour, T&P and fixing standard sized liquid soap dispenser of Jaquar Cat. No.-ACN 1135N or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 168 Supplying all materials, labour, T&P and fixing standard sizedCP toilet paper holder of Jaquar cat. No.-ACN1153S or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 169 Supplying all materials, labour, T&P and fixing standard sizedCP robe hook of Jaquar Cat. No.-ACN 1191N or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 170 Providing all materials, labour,T&P and fittings and fixing of flush valve of Jaquar Cat. No.-PRS 073 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 171 Providing and fixing 6L step can in stainless steel of Kohler make having cat no K-17531T-ST etc complete as per PH specification and direction of the engineer in charge 172 Providing and fixing fragrance disperser of Euronics make having cat no EA44 etc complete as per PH specification and direction of the engineer in charge 173 Providing and fixingcircular type stainless steel grating with hole for floor /nahani trap etc complete as per PH specification and direction of the engineer in charge 174 Supplying all materials, labours, T&P and fitting and fixing of the following size of CPVC pipe SDR11 confirming to IS 15778 certification mark with socket and screw joints in walls and floors including supplying of required number of fittings of approved make including cutting threads to pipes and pipes to length, including wastage,etc for fitting to the walls with supply of holder ats, clamps, fixing wooden plugs in walls, including testing of pipe line for water tightness complete as per IS specification including cost, conveyance and taxes of all materials all complete as per PH specification and direction of Engineer-in-charge. (Concealed) 175 15 mm dia 176 20 mm dia 177 25 mm dia 178 32 mm dia 179 Supplying all materials, labours, T&P and fitting and fixing of the following size of UPVC pipe S-80confirming to IS 13592 certification mark with socket and screw joints in walls and floors including supplying of required number of fittings of approved make including cutting threads to pipes and pipes to length, including wastage,etc for fitting to the walls with supply of holder ats, clamps, fixing wooden plugs in walls, including testing of pipe line for water tightness complete as per IS specification including cost, conveyance of all materials all complete as per PH specification and direction of Engineer-in-charge.(Non Concealed) 180 40mm dia 181 50mm dia 182 Supplying all materials, labour, T&P, fitting and fixing UPVC SWR pipes & fittings of approved make confirming to IS-13592, both below and above ground level / floor and on walls including supply of bobbins, nains, screws, wooden cleats, pipe clips as per requirement, including earth work in excavation and fitting, including cuting walls and floor and making good the damages with cement concrete (1:2:4) with hard granite chips, incluidng scaffolding wherever necessary all complete as per the PH specification and direction of the Engineer-in-charge. 183 75mm dia 184 110mm dia 185 Supplying all materials, labour, T&P, fitting and fixing of UPVC SWR fittings of approved make with requisite testing etc complete as per PH specification and direction of Engineer-in-charge. 186 110mm dia Single Junction with door 187 110mm dia Double Junction with door 188 110mm dia Cowl 189 110mm dia Plain Bend 190 110mm dia SWR Door Bend 191 125mm x 110mm Gulley Trap 192 110mm dia Tee with door 193 110mm dia Single Junction without door 194 110mm dia Socket Plug 195 110mm dia Pipe clip 196 110mm diaCoupler 197 75mm dia Plain Bend 198 Supplying all materials, labour, T&P, fitting & fixing of different size UPVC Ball Valve of approved make including supply of all necessary jointing materials such as red lead paint, yarns etc. including cost, conveyance & taxes of all materials, T&P etc. all complete as per P.H. specification and direction of the Engineer-in-charge. 199 25mm Dia 200 32mm Dia 201 40mm Dia 202 50mm Dia 203 Providing & fixing of 50mm dia UPVC body non return valve of approved make with high tensile bress rising stem suitable for the system pressure as per IS specification. 204 Supplying all materials,labours,T&P for cutting holes through existing brickwork including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge. 205 Supplying all materials,labours,T&P for cutting holes through existing RCC floors & roofs including making good the damages for taking GI pipes and fittings/PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge. 206 Supplying all materials,labours,T&P for cutting holes through existing brickwork including making good the damages in cement mortar (1:4) for taking SWR/HCI pipes and fittings/PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge. 207 Supplying all materials,labours,T&P for cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per direction of Engineer-in-charge. 208 Supplying all materials, labour, T&P and fittings and fixing of 1000 LTR Poly Propelene white double layer water storage Tank of approved make confirming to IS 12701-1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc including hoisting upto terrace level and placing the tank to the required position etc all complete as per PH specification and direction of Engineer-in-charge. (To provided with brick masonary guard walls which will be paid separately) 209 Supplyng all materials, labour, T&P for construction of brick masonary Gulley trap chamber of size 250mm x 250 mm with CI gulley trap, by flyash brick masonry in CM (1:4), CP (1:3) with 150mm x 150mm CI grating including labour and materials for fitting and fixing 100mm dia square mouth CI gully trap with supply of all jointing materials and encasing the gully trap with a block of CC (1:3:6) with 25mm size hard stone metal all complete with providing and fixing of 250mm x 250mm precast RCC cover slab including cost, conveyance, taxes of all materials to site complete as per the PH specification and direction of Engineer-in-charge. 210 Supplying all materials, labour, T&P, fitting and fixing UPVC SWR pipes & fittings of approved make confirming to IS-13592, both below and above ground level / floor and on walls including supply of bobbins, nains, screws, wooden cleats, pipe clips as per requirement, including earth work in excavation and fitting, including cuting walls and floor and making good the damages with cement concrete (1:2:4) with hard granite chips, incluidng scaffolding wherever necessary all complete as per the PH specification and direction of the Engineer-in-charge. 211 150mm dia 212 200mm dia 213 Supplying all materials, labour, T&P and necessary materials towards laying of RCC NP2 Hume pipe push tight joint type (including cost of RCC Hume pipe) inside the pipeline trench of required size with plastic rope without damage to the pipe with all convenience the materials to site and including all taxes all complete as per direction of Engineer-in-charge. 214 150mm Dia 215 200mm Dia 216 Supplying all materials,labours,T&P for constructing inspection chamber of 900mmx800mmx450mm with cement concrete (1:3:6) on bed with hard granite metal size 40mm and flyash brickwork in cement mortar (1:4) in foundation and plinth, 100mm thick RCC M25 cover slab with supplying fitting and fixing of medium duty SFRC manhole cover, moulding and shaping the channel and benching with cement concrete (1:2:4) using 12mm size hg chips,12mm thick cement plaster in cement mortar (1:3) with punning to inside, cement plaster in CM (1:3) to outside the chamber including centring, shuttering, providing required quantity of MS rods and binding wires for reinforcement, bending, binding, tying the grills and placing in the proper position and drawing and design and PH specification including cost, conveyance, royalty, taxes etc for all materials as per the drawing, design and direction of Engineer-in-charge. 217 Construction of circular brick masonary manhole chamber of size 1.20 x 0.90 mtr including cement concrete (1:3:6) in bed by using 40mm size granite metal, brickwork in CM (1:4) in foundation & plinth, cement plastering (1:3) over flyash brick, plastering in CM (1:3) with neat cement punning, CC (1:2:4) over bed for benching and channeling, RCC M25 for roof slab of 150mm thick and supply fitting and fixing SFRC medium duty type cover including cost of centring and shuttering cost of MS rod for RCC work, supplying fitting and fixing of the polypropelen step iron of required interval etc all complete with all cost, conveyance, royalties taxes etc all complete as per direction of Engineer-in-charge. 218 Extra for every additional depth of 0.10mtr or part there of manhole size 1200x900mm from 1100mm to 1650mm depth (data for 0.10 mtr per each) 219 Earthwork in excavation upto 1.50mtr depth of foundation trenches for columns, basement, tie beams, walls and steps in all kinds of soil including moorum, hard stony earth, earth mixed with boulders etc but not requiring blasting with initial leads and lifts including dressing and leveling the bed sides up to required depth and depositing the excavated materials at places away from the work site with T&P for shoring, shuttering, dewatering if required etc. complete as per the drawing, design including cost of all labour, T&P etc. as required for the work complete as directed by the Engineer-in-charge. 220 Extra lift or 1.5m or part there of over the initial lift of 1.5m in all kinds of embankments and road works and ordinary earth work in general. 221 Filling foundation trenches and plinth with excavated earth including laying the earth in layers not exceeding 23.5cm (9”) thick ramming and watering with all leads and lifts including cost of all labour, T&P etc. complete as directed by the Engineer-in-charge. 222 Providing and laying in trench cement concrete ( 1:4:8 ) with 40mm size hard granite metal in the following type of bedding for pvc pipes of the following internal diameter including curing complete as per specification (A1-Type Bedding) 223 150mm Dia 224 200mm Dia 225 Supplying all labour, T&P for the Carriage of excavated earth by mechanical means of transport within 5.00 K.M. lead including hire and running charges of vehicles, labour charges for loading and unloading as required for the work etc. complete as per the direction of the Engineer-in-charge. 226 Supplying and filling the pipeline trench with clean coarse river sand of approved quality from approved quarry, laying in layers not exceeding 150mm thick, watering and ramming including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge. 227 Supplying and construction of 100 user septic tank of standard size as per drawing, design and direction of Engineer in charge. 228 Supplying all materials,labours,T&P and constructing 1.22m dia and 2.1m depth soakway pit with precast RCC rings joined loose,gravel backing in the rear of well steining,precast RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including cutting hole in the rings for inlet pipe,earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty etc all complete as per approved specification and direction of Engineer-in-charge. 229 Supplying all materials, equipment, labour & conducting reconnaissance survey, integrated Hydrological and Geophysical (Electrical Resistivity Method) survey & selection of potential source for exploration of Ground Water including selection and recommendation of site for drilling wells in selected locations in any part of Orissa under the following Geological formation: 230 Rocky terrain with boulder formation for 300m depth 231 Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well). 232 Supplying 200mm polyvinyl chloride pipes as per ASTM-D-1785-89 schedule 80 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and internal threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes,pipes shall be provided with a groove at the male thread to accomodate flexible PVC/Rubber O ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length. 233 Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials. 234 Supplying all materials, labour, T&P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied directly by the department) 235 Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge 236 Supplying all materials, labours, T&P, fitting and jointing of 80mm dia double flanzed column GI pipe confirming to IS 1239/1968, medium class having IS mark of approved make / tata medium series with socket and screw joint including supply, fitting and fixing of required number of IS certified fitting, cutting threads to pipe and pipes to length including wastage providing necessary offsets and lay screw with extra socket and jam nut including fixing to wall and floors with supply of holder bats, clamps, fixing wooden plugs in walls complete as per direction of Engineer-in-charge. 237 Supply, installation, testing and commisioning of vertical submerssible pump set of approved make having discharge 30m3 per hour and 70mtr head including installation of pump set withwire ropes, clamps etc inside the borewell, etc complete as per the Direction of Engineer-in-charge. (Duty of pump to be decided depending upon yeild of the borewell) 238 Supply, installation, testing and commisioning of automatic star delta control panel suitable for 10HP pumpset including MS box fitted with main switch ,contactor, single phasing preventer, timer, selector switch, voltmetre, ammeter etc and connection with motor inside the borewell complete as per the Direction of Engineer-in-charge. (Excluding power supply and flat cable for connection with motor) 239 Protection to the Borewell with CC base 240 3 core 6.0sqmm copper flat cable 241 Bore Cap 242 Clamp 243 Supplying all materials, labours, T&P and fitting and fixing of the following size of UPVC pipe (Sch-80)confirming to ASTM D1785 certification mark with socket and screw joints in walls and floors including supplying of required number of fittings of approved make including cutting threads to pipes and pipes to length, including wastage,etc for fitting to the walls with supply of holder ats, clamps, fixing wooden plugs in walls, including testing of pipe line for water tightness complete as per IS specification including cost, conveyance of all materials all complete as per PH specification and direction of Engineer-in-charge.(Non Concealed) 244 80mm Dia 245 65mm Dia 246 Supplying all materials, labour, T&P, fitting & fixing of different size UPVC Ball Valve of approved make including supply of all necessary jointing materials such as red lead paint, yarns etc. including cost, conveyance of all materials, T&P etc. all complete as per P.H. specification and direction of the Engineer-in-charge. 247 65mm Dia 248 80mm Dia 249 Providing & fixing of following dia UPVC body non return valve of approved make with high tensile bress rising stem suitable for the system pressure as per IS specification. 250 65mm Dia 251 80mm Dia 252 Supplying all materials & labour, T&P and constructing brick masonary chamber for water sluice valve, single air valve & non return valve with flyash brick masonary in cement mortar (1:4) as per approved drawing and specification CC (1:4:8) with 4cm size hard granite metal on the bed, 12mm cement plaster (1:3) to inside and cement flush pointing (1:3) to outside surface with 100mm thick RCC M25 cover slab with 12mm hg chips using required quantity of tor steel, centring and shuttering to the slab and dismantling it after 31 days of casting, filling the outside cavity with excavated materials, watering, curing including cost, conveyance, taxes of all materials, labour charges for cutting, bending, binding and tying the grills in proper position etc all complete as per drawing, design and direction of Engineer-in-charge. 253 Sluice Valve Chamber (0.75x0.75x1.20mtr) 254 Supplying all materials, labour, T&P, fitting & fixing of different size bourden type pressure gauge of reputed make (0-10 kg/sqcm) with valves, piping, fitting of approved make including supply of all necessary jointing materials such as red lead paint, yarns etc. including cost, conveyance & taxes of all materials, T&P etc. all complete as per P.H. specification and as per the direction of the Engineer-in-charge. 255 Supplying all materials, labour, T&P and fitting and fixing of double air valve confirming to the relevant IS specification and dimension including fixing it in position along the pipeline with supply of all required materials such as rubber insertion, nuts & bolts including cost of all materials, taxes, and duties, transportation charges from store to site etc all complete as per the direction of Engineer-in-charge. 256 INTERNAL ELECTRIFICATION WORK 257 TRAININING ROOM AND SKILL DEVELOPMENT CENTER 258 Wiring 259 Wiring to light points/fan point/exhaust fan point/Call bell point with 1.5-sqmm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non metalic PVC flexible condute with 6Amp, 250V Modular Switch ISI marked and ceiling rose ISI marked mounted on Metal box having front Modular cover of suitable size, metal box with 1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. (Make of wire-Finolex/ L&T/ Anchor/ Havells/ KEI) 260 Primery point 261 Secondary point 262 Call bell point 263 Wall bracket fan/Air circulator point specification same as above. 264 Exhaust fan point specification same as above. 265 Ceiling fan point consisting of modular regulator of Legrand make model name Myrius or equivalent on existing switch board 266 Supply and fixing of 6Amp plug with 6amp switch on existing board (Modular type ISI marked) 267 Point wiring for 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess 20 mm dia non-metalic PVC flexible conduit with modular type switch, phenolic laminated sheet suitable size ISI marked MS box and earthing point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc. as required. (convinient power) (Make of wire-Finolex/ L&T/ Anchor/ Havells/ KEI) 268 Supply and fixing of ISI marked modular type 2nos 6Amp plug with switch on suitable size of metal box and modular cover in fronton surface or recess including all conection. 269 Supply and fixing of ISI marked modular type 1nos 6Amp plug with switch and 1nos 16Amp plug with switch on suitable size of metal box and modular cover in fronton surface or recess including all conection. 270 Supply and fixing of modular metal box on surface or recess with suitable size of modular cover in front including providing an fixing of ISI marked 16Amp plug with switch with all conection. 271 Supply& fixing of Modular type 25 Amp one way switch and socket outlet for AC point with metal box and modular cover. 272 Recessed/surface extra lead submain wiring alongwith earth wire with the folowing size of PVC insulated single core multistrand coper conductor of ISI marked conforming to IS 694/1990 in 20mm dia non metalic heavy duty flexible condute 1.6mm in surface/recessed PVC condute as required (Make of wire-Finolex/ L&T/ Anchor/ Havells/ Great White/ KEI) exceeding to Long point in 2x1.5sqmm + 1x1.5sqmm. 273 Submains: 274 Recessed/surface submain wiring alongwith earth wire with the following size of PVC insulated single core multistrand copper conductor ISI marked conforming to IS-694/1990 in required dia non metalic heavy duty flexible condute 1.6mm in surface/recessed PVC condute as required. (Make of wire-Finolex/ L&T/ Anchor/ Havells/ Great White/ KEI) 275 2 x 2.5 sq.mm. + 1 x 1.5 sq.mm. 276 2 x 4.0 sq.mm. + 1 x 1.5 sq.mm. 277 2 x 6.0 sq.mm. + 1 x 2.5 sq.mm. 278 4 x 4.0 sq.mm. + 2 x 2.5 sq.mm. 279 4 x 6.0 sq.mm. + 2 x 2.5 sq.mm. 280 4 x 10.0 sq.mm. + 2 x 4.0 sq.mm. 281 CONTROL PANELS : 282 Supply, delivery, installation, testing & commissioning of L.T. Indoor floor / wall mounted typeDistribution Board made out of 2 mm thick CR sheet metal cubiclewith front side hinges glass door for every meter compartment, the cabinet have a common bus bar, duly acid treated for derusting, primered and painted with 2 coats of enamel paint of approved shade; dust, damp & vermin proof powder coated; having hinged door and compartmental arrangement for eachequipment& busbar chamber onthe top of the panel; having provision for cable/ conduit entry, earthing studs as per specification mentioned below duly factory wired conforming to the relevant ISSandasperspecial conditions of contract making good the damages caused complete as per the direction of Engineer-in-Charge.All MCCB shall confirm to IEC- 60947 and IS-13947. MCCB shall comply with the isolation function requirement of IEC-60947-2 section 7.1.2 to be marked as suitable for isolation / disconnection to facilitate safety of person in use. All MCCB have Ics=100% Icu and the overload setting should be from 0.7 to 1 times of Ir for thermal magnetic release and for microprocessor release the overload Settings: 0.4 to 1 times of Ir. Manually closing mechanism should be accommodated in a Moulded housing of robust and vermin-proof construction. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open) . The tripping devices shall be ambient temperature compensated type. The insulating case shall be made of high strength heat resistant and flame retardant thermosetting insulating material. 283 MAIN PANEL (TRAININING ROOM AND SKILL DEVELOPMENT CENTER). Incoming - (MCCB: 1 No 250A (36kA) 4P thermal magnetic(TM) release with ROM & spreader links. SPD: 1No 50kA 4P T1+T2. MCB C: 1 No 63A 10kA 4P.CHANGE OVER SWITCH: 1 no 250A 4P On Load Change OverSwitch.); Outgoing -(Busbar: 2 SET, 4Nos 320 Amp Copper Strips. (CD=1.6A/sqmm). MCCB: 4 Nos 100A (16kA) 4P thermal magnetic(TM) with ROM & spreader links for DB Training Room & Skill Development Center, DB Community Hall, OAT & Spare. MCCB: 5 No 63A (16kA) 4P thermal magnetic(TM) with ROM & spreader links for Pump Room, STP DB, External Light Feeder Panel, Solar Input & Spare.); Instruments - (1 Set of LED type RYB phase indicating lamps with control fuses & 1no multi function meter with required CTs) 284 DB TRAININING ROOM AND SKILL DEVELOPMENT CENTER (TRAININING ROOM AND SKILL DEVELOPMENT CENTER).Incoming- MCCB: 1 No 80A (16kA) 4P thermal magnetic(TM) release with ROM & spreader links. CHANGE OVER SWITCH: 1 no 100A 4P On Load Change OverSwitch); Outgoing - [Busbar: 2 SET, 4Nos 100 Amp Copper Strips. (CD=1.6A/sqmm). MCB C 3 Nos 40/63A 10kA 4P for 4 Way TPN BDB for Power & Spare. MCB C 3 Nos 32A 10kA 4P for 4 Way TPN BDB for Light & Spare. MCB C 3 Nos 40A 10kA 2P for SPN BDB/ SPARE]. Instruments - (1 Set of LED type RYB phase indicating lamps with control fuses & 1no multi function meter with required CTs) 285 Distribution Board COMMUNITY HALL:Incoming - (MCCB: 1 No 80A (16kA) 4P thermal magnetic(TM) release with ROM & spreader links. CHANGE OVER SWITCH: 1 no 80A 4P On Load Change OverSwitch); outgoing - [Busbar: 2 SET, 4Nos 100 Amp Copper Strips. (CD=1.6A/sqmm). MCB C 3 Nos 40/63A 10kA 4P for 4 Way TPN BDB for Power & Spare. MCB C 3 Nos 32A 10kA 4P for 4 Way TPN BDB for Light & Spare. MCB C 3 Nos 40A 10kA 2P for SPN BDB/ SPARE]; Instruments- (1 Set of LED type RYB phase indicating lamps with control fuses & 1no multi function meter with required CTs) 286 Distribution Board OAT:Incoming - (MCCB: 1 No 80A (16kA) 4P thermal magnetic(TM) release with ROM & spreader links. CHANGE OVER SWITCH: 1 no 80A 4P On Load Change OverSwitch); Outgoing -[ Busbar: 2 SET, 4Nos 100 Amp Copper Strips. (CD=1.6A/sqmm). MCB C 2 Nos 40/63A 10kA 4P for 4 Way TPN BDB for Power & Spare. MCB C 2 Nos 32A 10kA 4P for 4 Way TPN BDB for Light & Spare. MCB C 2 Nos 40A 10kA 2P for SPN BDB/ SPARE. MCB C 8 Nos 32A 10kA 2P for Power Cercuit/SPN BDB/ SPARE]; Instruments- (1 Set of LED type RYB phase indicating lamps with control fuses & 1no multi function meter with required CTs) 287 Supply, delivery, installation, testing & commissioning of L.T. indoor floor/ wall mounted type distribution boards made out of reputed company IP 43 - #IK 09 with metal door having provision for cable/ conduit entry, earthing studs as per specification mentioned below duly factory wired conforming to the relevant ISSandasperspecial conditions of contract making good the damages caused complete as per the direction of Engineer-in-charge. 288 4way TPN BDB for Light: Incoming - (1 no of 25A 30mA 4P RCCB); Outgoing-(12 nos of 6-16A SP MCB C) 289 4way TPN BDB for Raw Power: incoming - (1 no of 63A 4P MCI); Outgoing - (12 nos of 10-32A SP MCB) 290 12 way SPN BDB: incoming- (1 no of MCB C 32A (10kA) 2P); Outgoing- (10 nos of 6-10A SP MCB C. Cable Laying) 291 Supply, laying & testing of following size of PVC insulated, PVC sheathed, round armoured aluminium conductor power cable of 1100 volt grade laid on surface of wall / column / existing RCC / stone ware / masonry cable trench / cable trey / through G.I. pipe / hume pipe as the case may be, including cost of saddles / clamps / markers etc but excluding the cost of G. I. pipe / hume pipe complete with making good the damages caused and returning the balance unused cables to stores as required and as per direction of Engineer-in-charge. 292 4 core x 240 sqmm A2XFY 293 4 core x 25 sqmm A2XFY 294 Cable termination: 295 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required complete as per the direction of Engineer-in-charge. 296 4 core x 240 sqmm A2XFY 297 4 core x 25 sqmm A2XFY 298 Earthing 299 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required and as per the direction of Engineer in charge. 300 Providing and fixing of 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. 301 Providing and fixing 4.00 mm dia hard drawn bare copper wire on surface or in recess for loop earthing as required. 302 Fittings & Fixtures 303 Supply,installation, testing & commissioning of following types of light fixtures directly on wall / ceiling of building with allaccessories such as drivers, lamps cover etc complete assembly including supply of all accessories and making connection from the suitable point outlet complete as per the direction of Engineer-in-charge. 304 22 watt LED extruded aluminium batten for continuous operation and available in 4ft run length, suitable for surface, wall & conduit mounting (with accessories) similar to make ‘Signify’ Cat no. BN021C LED22S complete. 305 12 watt LED extruded aluminium batten available in 2ft run length with multiple lumen packages and suitable for surface, wall & conduit mounting (with accessories) similar to make ‘Signify’ Cat no. BN 021 LED12S 6500 complete. 306 Inverter type 9 watt LED Bulb on existing holder of approved make 307 12 watt LED, Brightest metal surface light with 100lm/W light output, Full low diffusor allows for wider light spread of 270 degrees, Aluminum die cast housing for better heat dissipation, Longer life of 30,000 hours^, Super slim design with a height of just 38mm allowing the product toblend seamlessly with the ceiling, Surge protection of 3kV with wide voltage protection of 160-360V similar to make Philips model name Metal FullGlow complete. 308 65-70 watt Highbay LED efficacy of 150Lm/W with its robust housing design and cater to diverse applications with multiple options of beam angles and suitable for surface mounting (with accessories) similar to make ‘Philips’ Cat no. BY515P LED100S 5700 complete. 309 36 watt SmartGlow is an intelligent office lighting recessed luminaire with built in PIR occupancy sensor offering flexibility of auto switching off when the space is not occupied similar to make Signify Cat no.RC383B P LED 36S complete. 310 5 watt recessed mounted down light, Decorative finish downlighter with hallmark silver ring for beautiful aesthetics, Ultra thin trim for a seamless fit, High lumen efficiency, Aluminum housing for better performance, Designed for robustness: wide voltage protection from 160V-360V, Surge protection up to 2.5kV similar to make Philips model Aura StylEdge complete. 311 7 watt recessed mounted down light, Decorative finish downlighter with hallmark silver ring for beautiful aesthetics, Ultra thin trim for a seamless fit, High lumen efficiency, Aluminum housing for better performance, Designed for robustness: wide voltage protection from 160V-360V, Surge protection up to 2.5kV similar to make Philips model Aura StylEdge complete. 312 10 watt LEDTrack light, Long-lasting fixture, Robust metal construction, Functional, minimal design, Perfect fit for any home/outlet, Wide voltage protection from 160V–360V and surge protection up to 2KV, Premium white aluminium housing,No harmful UV radiation similar to make Philips Stanchion Track Light model no.31445 complete. 313 Track fo installation of track light similar to make Philips Stanchion Track model no 31442 complete. 314 48-50 watt LED Suspended 50mm aluminium extruded linear lighting luminaires with superior white powder coated finish (with accessories) similar to make ‘Philips’ Cat no. SP780P LED52S-6500 complete. 315 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, Ceiling Fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. Canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required similar to make Crompton Cat no. Energion HS - 5 Star BEE complete. 316 Supply, delivery, installation, testing & commissioning of single phase 400mm sweep wall mount fan similar to make Crompton Cat no. WM Hiflo Wave Plus complete. 317 Supply, delivery, installation, testing & commissioning of wall mounted air circulator 750mm sweep (Crompton make model nameAC750WALL / Havells/ Bajaj) 318 Supply, delivery, installation, testing & commissioning of single phase 600mm sweep 900 RPM heavy duty Exhaust fan(Crompton make cat no EXHD600-6-1/ Havells/ Bajaj) 319 Supply, installation, testing & commissioning of metal Exhaust Fan 300mm sweep similar to make ‘Crompton’cat no Trans Air 12 complete. 320 Supply, delivery, installation, testing & commissioning of plastic Ventilation fan 150mm sweep similar to make Crompton cat no Brisk Air Neo 6 complete. 321 Supplying and fixing Call bell Buzzer suitable for single phase, 230 volts, 1 Module of similar to make Legrand Myrius Cat no. 6792 50 complete. 322 Supply and fixing circular / hexagonal G.I. box for ceiling fan hook, of internal dia 140 mm, 75 mm height, top lid of 1.5 mm thick G.I. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the G.I.box by means of 3.3 mm dia round headed screws, one lock at the corners. Hook shall be made of 10 mm dia galvanised M.S. bar bent to shape as per standard drawing. 323 Providing and fixing extra down rod of 20 cm length G.I. pipe 20 mm dia heavy gauge including painting etc as required. (more than 5 cm lenght shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored.) 324 Testing, commissioning and charging of entire wiring system for TRAININING ROOM AND SKILL DEVELOPMENT CENTER. 325 Testing, commissioning and charging of entire wiring system for COMMUNITY HALL. 326 Testing, commissioning and charging of entire wiring system for OAT GREEN ROOM. 327 EXTERNAL ELECTRIFICATION (100kVA SUB-STATION) WORK 328 CABLING WORK 329 Supply of following size of PVC Armoured cables ISI marked. 330 4 core x 150 sqmm A2XFY 331 Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum cable of 1.1 KV as required. 332 4 core x 150 sqmm A2XFY 333 Cable Trench & Hume Pipe 334 Construction of cable trench of size [1000mm(W) x 1000mm(D)] complete , base foundation with C.C 1:3:6, 250mm brick walls,filling the inside area with sand, removableRCC slab for chambers with C.C 1:2:4 on the top, wall and top plastering etc complete as per the approved drawing 335 Construction of cable trench of size [600mm(W) x 1000mm(D)] complete, base foundation with C.C 1:3:6, 250mm brick walls,filling the inside area with sand, removableRCC slab for chambers with C.C 1:2:4 on the top, wall and top plastering etc complete as per the approved drawing. 336 Supply, delivery and laying of floowing sizes of RCC Hume pipe at a depth of 1000mm Ground level for cable laying as required including cost of all accessories, jointing, masonry inspection chamber at both ends etc completeas per direction of Engineer-in-charge. 337 150mm dia RCC Hume pipe 338 250mm dia RCC Hume pipe 339 TRANSFORMER INSTALLATION WORK 340 Supply & fixing CT meter sheet steel enclosures made out of 16 gauge CRCA sheet ,double door with lock, neopraene gasket all around, two numbers earth lugs including painting ,padlock arrangement. Class 0.5 with O/P burden of 30VA 341 Supplying and erection of 150X 150 RS joist pole of 11m long. (30.6 kg /mtr). 342 Supply installation and commissioning of 200Amp 11kv on load isolated air brake switch with braking capacity of 10kA complete with following accessories. Knife blade switches both Male/Female. Operating GI pipe with handle & rotating mechanism. Pad locking arrangement with pad lock. Scope also includes interconnecting AB switch OH line with 30sqmm AAC conductor & interconnection to pin insulator/HG fuse set by suitable Cu flexible strip .Spring earth of the handle ,earthing of switch etc. 343 Supply installation and commissioning of 11kV home gap fuse set on the double pole structure. The 11KV HG fuse set to be complete with 11KV insulators Cu horn gaps etc. The scope also includes interconnecting the HG fuse with transformer with 0 SWG HDB Cu conductor. (11KV, 200Amp, 3Pole) 344 Supply installation and commissioning of 11KV lighting arrester including interconnection by 30sqmm AAC conductor & clamp(12KV, 5KA) 345 Supply and fixing of substation bracket inj complete set. With 100x50x6 mm for MS channel, 75x40x6mm MS channel for AB switch and HG fuse, 50x50x5mm MS angle for Transformer (140Kg) including painting. 346 Supply installation and commissioning of 11KV Disc Insulator 90 KN (B & S type) 347 Supply & fixing of11 KVDisc hard ware fittings (in pairs) 348 Supply installation and commissioning of HT Stay set with complete accesssories like Anchor rods, insulators, bow eye bolts and stay wires. Scope inclusive of supply of stay clamps. 349 Supply of materials and installation of pipe earth electrode made out of 40mm dia class B G.I. pipe of 3.0 metre long with arrangements for fitting/ terminationofG.I. flat / wire withG. I. nutbolts& washers including cost of charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCCcover complete with labour for excavation of pitinall kinds of soil & rock as required and as per direction of Engineer-in-charge. 350 Supply of materials and installation of chemical earthing size of chemical earth bar 3 mtr, size of earth pit 3 X 2 X 9 chemical compound to be used 50 kg. There is an arrangements forterminationofcopper strip of earth continuity conductor including cost of water pouring arrangements, brick masonary enclosure on top with removable cast iron cover complete with labour for excavation of pitinall kinds of soil & rock as required and as per direction of Engineer-in-charge. 351 Supplying and laying 25 mm x 5 mm copper strip on surface or in recess for connection etc as required. 352 Supplying and laying 25 mm x 5mm G.I. strip on surface or in recess for connection etc as required. 353 Supply & fixing ofGInuts, bolts & washer of assoarted size for above work. 354 Supply installation and commissioning of 100 KVA, 11/0.4KV (AL) Transformer with tap changer, BIS Energy level-II with necessary hardware including unloading from truck, leading to the pole/plinth location and EMR test etc as required. 355 Supply & providing of 11K GI pin & pin insulators 356 Providing and binding with aluminium binding wire for all type binding for transformer installation work. 357 Supplying and painting with Aluminium Paint where ever required for transmission line. 358 Supplying and painting with Black paint where ever required for transmission line. 359 Supplying and painting with Redoxide paint where ever required for transmission line. 360 Supply installation and commissioning LT Distribution Panel Board for 100KVA Transformer with MCCB, Aluminium Busbar for two Bay with Kitkat Fuse. 361 Supply installation and commissioning LT Busing cover in the LT site of the transformer 362 Supply and construct with all material for Boundary wall for fencing and anti climbing with M.S. Gate 5-0 x 8-0.Sand & Gravel spreading over the entire area. 363 Supply and construct with all material for plinth of size 5-0x5-0x6-0. 364 11 KV Single Circuit line 365 Supplying and erection of 150X 150 RS joist pole of 11m long. (30.6 kg /mtr). 4 nos 366 Supply & fixing of(100 x 50 x 6)mm M.S Channel 367 Supply & fixing of11 KV V cross arm. 368 Supply & fixing of 11 KV top chanel.. 369 Supply & fixing of back clamp for cross arm 370 Supply & providing of 11K GI pin & pin insulators 371 Supply installation and commissioning of 11KV Disc Insulator 90 KN (B & S type) 372 Supply & fixing of11 KVDisc hard ware fittings (in pairs) 373 Supply installation and commissioning of HT Stay set with complete accesssories like Anchor rods, insulators, bow eye bolts and stay wires. Scope inclusive of supply of stay clamps. 374 Supply & installation of coil earthing 375 Supply & fixing ofassoarted nuts, bolts & washer for above work. 376 Providing and binding with aluminium binding wire for all type binding for transformer installation work. 377 Supply & stringing with 80mm² insulated AAA Conductor. 378 Supplying and painting with Aluminium Paint where ever required for transmission line. 379 Supplying and painting with Black paint where ever required for transmission line. 380 Supplying and painting with Redoxide paint where ever required for transmission line. 381 Garding 382 Supply & fixing of(75 x 40 x 6)mm M.S Channel 383 Supply & fixing of No 8 G.I wire 384 Supply & fixing ofeye hook 385 SAFETY EQUIPMENTS & OTHER: 386 Supply and hanging of Shock Treatment Chart duly Laminated. 387 Supply & Laying of 8 mm Thick Rubber Mat (1mtr x 2mtr), ISI mark of 1100 V Grade. 388 Supply and Installation of 4 Nos. Fire Buckets on a Mild Steel Stand complete as per specification and requirement of Fire Safety Provisions. 389 Supply and Installation of 4.5 Kgs. Capacity CO2 type Fire Extinguisher complete as required. 390 Providing and fixing bi-lingual Danger HT notice board of 250mmx200mm as specified below,made of mil;d steel at least 2mm thick & vitreous enamelled signal red color on both sides as background & with insprictions in enamelled vitreous white color on front side for lettering as required. 391 Supply of First Aid box with all required accessories. 392 EXTERNAL ILUMINATION 393 Feeder Panel with timer 394 Supply, delivery, installation, testing & commissioning of L.T. Indoor floor / wall mounted typeDistribution Board made out of 2 mm thick CR sheet metal cubiclewith front side hinges glass door for every meter compartment, the cabinet have a common bus bar, duly acid treated for derusting, primered and painted with 2 coats of enamel paint of approved shade; dust, damp & vermin proof powder coated; having hinged door and compartmental arrangement for eachequipment& busbar chamber onthe top of the panel; having provision for cable/ conduit entry, earthing studs as per specification mentioned below duly factory wired conforming to the relevant ISSandasperspecial conditions of contract making good the damages caused complete as per the direction of Engineer-in-Charge. Incoming: 1 no 63A 4P MCCB (16 KA) type followed by 1 No 63-A 4 NO power contactor with Bypass Toggle switch & timer. Bus bars: 4 Nos.20x3mm E C Strips. Outgoing: 4 Nos 40/63-A, 4P MCB C (10kA). 4 nos 40/63 Amp 2P MCB C (10 KA).Complete duly factory wired as per SLD. Cable & wires 395 Junction Box 396 Supply, installation and testing ofCable Junction Boxes IP 66/67 “weather proof”, for outdoor installation with terminals, made of high quality Thermoplastic for cable size 10-16sqmm and box size 155mm x 210mm x 92mm (Hensel make or equivalent) 397 CABLES & ACCESSORIES 398 Supply, laying & testing of following size of PVC insulated, PVC sheathed, round armoured aluminium conductor power cable of 1100 volt grade laid on surface of wall / column / existing RCC / stone ware / masonry cable trench / cable trey / through G.I. pipe / hume pipe as the case may be, including cost of saddles / clamps / markers etc but excluding the cost of G. I. pipe / hume pipe complete with making good the damages caused and returning the balance unused cables to stores as required and as per direction of Engineer-in-charge. 399 3c x 2.5 Sq. mm flexible Copper cable for connection of lamp from JB 400 2c x 6 Sq. mm Aluminum armoured cable. 401 4c x 10 Sq. mm Aluminum armoured cable. 402 4c x 16 Sq. mm Aluminum armoured cable. 403 Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required. 404 Supplying and fixing of following dia ISI marked HDPE pipe with material grade PE-80 in ground/recess including excavation the earthl and making good the same in case of recessed conduit as required. 405 40mm OD PN-8, 3 mm thick 406 90mm OD PN-4, 3.5 mm thick 407 110mm OD PN-4, 4.3 mm thick 408 Supply, delivery and laying of floowing sizes of RCC Hume pipe at a depth of 1000mm Ground level for cable laying as required including cost of all accessories, jointing, masonry inspection chamber at both ends etc completeas per direction of Engineer-in-charge. 409 150mm dia RCC Hume pipe 410 Fittings & Fixtures 411 Supply of 7meter long aesthetically designed QUADRA MAST light pole. Pole shall made up of Hot Dip Galvanized Body andcoated with zinc rich primer & pure polyester powder coatingand finished with jet black colour and 3 coat Marine grade. The pole shall be suitable for fitting of 4nos of 100W rectangular design street light made up ofExtruded aluminium body and Clear toughend glass diffuser. Dimension of light must be 607 x 200 x 230mm. Body size of the pole will □150mm from bottom and 100mm size from middle to top. The Pole shall have base Plate□300 x 16mm thick with provision for founation bolt fittings. Pole is Compatible for 70mm size for cable entry & exist. Junction Box service door is made up cast aluminium of size 325 X 90mm and the control gear tray only is prewired with 2.5sq mm cable, 6A SP MCB and 4pole studd connector for loop-in loo-out arrangement with all materials & labour as required as per the direction of Engineer-in- Charge.(Make: K -lite Pole KP-2042-700 + KL-4461 Luminaries/ equivalent ). 412 Supply of 3 meter long aesthetically designed decorative lighting pole with 400mm height Cast Aluminium base, cast aluminium ring on the middle portion. Pole shall be made up of Mild Steel Body and coated with zinc rich primer & pure polyester powder coating of black with gold embellishment finish. Bottom dia of the pole will be Ø139.7mm, Middle portion dia will be Ø76.1 mm and having base Plate of size □200 x12mm thick with provision for founation bolt. Pole is Compatible for Ø70mm size for cable entry & exist. Junction Box service door is made up cast aluminium and the control gear tray only is prewired with 2.5sq mm cable, 6A SP MCB and 32A 4pole terminal connector for loop-in loo-out arrangement with all materials & labour as required as per the direction of Engineer-in- Charge. (Make: K -lite Florian Pole KP- 4329/ equivalent). 413 Supply of 50W LED Post Top Light made up of Die Cast Aluminium base with spun aluminium top cover Body with clear Acrylic diffuser and having Dimension : Ø400 x 807 protected with IP 65, Surge Protection : 6KV, THD : <10% (Make: K -lite Imperial KL- 5444/ equivalent). 414 Supply, delivery, installation and testing of 4000mm long 100mm dia quadra extruded aluminium alloy pole with LED 45 watt post top light and foundation bolt and all fixing acessories with required size of rcc foundation as per direction of Engineer-in-charge. (K-Lite Pole cat noKP-5052, K-Lite Fitting cat no KL-5436 or equivalent),Pole made of extruded aluminium alloy (grade 6063) can achieve high strength and corrosion resistance in various atmospheric conditions, Pole design parameters vary depending on the type of bracket and loading factor, All pole sections are welded using special v groove technique by certified welders using high end MIG welding processes, The control gear tray is prewired with MCB, terminal connectors for loop-in / loop-out arrangement.Built-in control box with service Can be Integrated with LED Modules. door including lock and safety chain (except 200 x 50).Earth connection. Safety class I, CE-Conformity mark,BIS - Conformity mark. 415 Supply, delivery, installation and testing of 8w LED Bollard 100mm dia 1000mm long for uniform illumination for pathways with required size of cc foundation as per direction of Engineer-in-charge. (K-Lite cat no KL-4823/ Ligman/ Simes/ Unilamp/ equivalent). Luminaire made of extruded aluminium alloy (grade 6063) with die-cast aluminium components and non corrosive SS fasteners. Reflector system made of die-cast / spun aluminium. Non yellowing UV stabilized polycarbonate clear / translucent diffuser, Silicone gasket.Cast Iron / aluminium mounting plate with an anchorage unit made out of hot dip galvanised steel for extra guarantee against corrosion. Luminaire can be aligned on the mounting plate around 360°. Cast Iron / aluminium mounting plate with an anchorage unit made out of hot dip galvanised steel for extra guarantee against corrosion. Luminaire can be aligned on the mounting plate around 360°. Cable entries for through-wiring of mains supply cable. Protection class IP54 / IP65. Integral power supply. Earth connection. Safety class I. CE-Conformity mark. BIS - Conformity mark. Suitable for operation on 240V, 50Hz single phase ac supply.

BRR:8648597 Bids Are invited for Hyd Filter - Jcb , Hyd Hose Oil Cooler - Jcb , Mud Air Filter Element - Jcb , Beading Wind Shield Glass - Jcb , Loading Valve Hose - Jcb , Hyd Pump Seal Kit - Jcb , Wind Screen - Jcb , Piston Assy - Jcb , Piston Ring - Jcb , Piston Sleeve - Jcb Total Quantity : 24

BRR:8648403 Bids Are Invited For Self Screw Block , Cable PVC insulated elecric cables open bracket heavy dutyas per item description , Switch Piano 5 Amp 230 Volts Flush type one way as per item description , Square Block , Cable PVC insulated elecric cables open bracket heavy duty as per item description , PPR Elbow 20mm , PPR Socket 20mm , Ceiling Rose , PPR Elbow 90 Degre 30mm , PVC casing capping of size as per item description , Teflon Tape Roll , Non Skid Ceramic tiles 300 x 300mm , PPR Socket 32mm , White Cement , Cable PVC insulated electric cables as per item description , PPR Reducer 32 slash 20mm , PPR Reducer Elow 32 slash 20mm , Switch socket combination as per item description , PVC Contention 45cm Long , PVC Switch Board 10 x 8 , Air termination single pointed aluminium rod 12 mm dia and 300 mm long , Aluminium strips 25 x 3.0 mm , PPR Pipe 20mm , Cable PVC insulated electric cables open bracket as peritem description , MCB single pole 10 Ampere capacity B Series as per item description , PPR T PE male Thread , Soap Dish SS , PPR Pipe 32mm , S Trap Viterous China , M Seal 150g Pocket , Brass CP Jet Water Spray , PPR Union 32mm , MCB single pole 32 Amp capacity B Series as per item description , LED Bulk head fitting high pressure die as per item description , Toilet Paper Holder , LED Tube light fittings 20W 230V box type 4 feets with as per item description , Bob Cock 15mm Brass Charminar , Pillar Cock Charminar open bracket Tap for Wash Basin close bracket , Stop Cock Angular 15mm , Shower rose 100mm Dia , Stop Cock T Type Charminar , Looking Mirror 600mm x 450mm , Corner Sheet glass self , Plastic Dustbin 40 Ltr , Gate Valve 32mm , Distribution box 6 Way double door as per item description , Acrylic sheet 8 x 4 x 3mm open bracket as per item desciption , WC European type model 2008 EWC and as per item description , Electric Geyser of capacity 25 ltr as per item description Total Quantity :

BRR:8648380 Bids Are invited for Speedometer Vdo , Shaft Reduction Shifting , Piston Ring , Connecting Rod Bushing , Sealing Ring Total Quantity : 14

BRR:8648355 Bids Are invited for Bearing Assy Rear , Oil Dipstick Tube , Thermostate Valve , Eng Mounting Front , Clutch Assy , Piston Ring Total Quantity : 7

BRR:8648351 Bids Are invited for Oil Filter - X2 , Outer End Brg - X2 , Piston Ring - X2 , Ring Piston - X2 , Fan Belt - X2 , Rubber 84 Mm - X2 , Fuel Flexible Pipe - X2 , Filter Assy Air Intake - X2 , Pipe Filter Pump - X2 , Pipe Fuel Wire Braided Feed Pump - X2 , Ring Compression - X2 Total Quantity : 32

BRR:8648334 Bids Are invited for Hvac Demo Kit - Product Size Mm 1600X1450x1600 Conditioning Compressor Work Voltage Dc600v Warm Wind Module Work Voltage Dc600v Low Voltage Work Power Dc12v , Instruction Kit For Charging System , Instruction Kit For Starting System , Lighting And Wiring System Mock Layout , Electric Vehicle Kit Chassis - 3 Wheel Passenger Full Vehicle For Assembly & Disassembly 4-Wheeler Buggy Electrical Vehicle Component Checker/Diagnostic Solar Based Charging Safety Tool Kit Total Quantity : 5

BRR:8648325 Bids Are Invited For Oil Filter For Tata Jd , Fuel Filter For Tata Jd , Hyd Filter For Tata Jd , Inner And Outer Element For Tata Jd , Air Pre Cleaner For Tata Jd , Dashboard Switch For Tata Jd , Temp Sensor For Tata Jd , Fan Belt For Tata Jd , Gear Slow Nut For Tata Jd , Starting Hyd Hose Pipe For Tata Jd , Cross For Tata Jd , 4X4 Shaft For Tata Jd , Stopper Cable For Tata Jd , Accelerator Cable For Tata Jd , Door Handle With Lock For Tata Jd , Wiper With Accessories For Tata Jd , Grease Nipple For Tata Jd , Head Light Bulb For Tata Jd , Bucket Teeth With Lock For Tata Jd , Cabin Fan For Tata Jd , Trans Filter For Tata Jd , Wire Tie Packet For Tata Jd , Hyd Jack Seal For Tata Jd , Excavator Hyd Hose For Tata Jd , Main Fuel Line For Tata Jd , Fuel Tank Strainer For Tata Jd , Fuze For Tata Jd , Rear Indicator For Tata Jd , M Seal Small For Tata Jd , Fuel Filter For Size Dozer-Ii , Oil Filter For Size Dozer-Ii , Cotton Filter For Size Dozer-Ii , Air Cleaner Inner And Outer For Size Dozer-Ii , Blade Pin Arm Lock For Size Dozer-Ii , Hyd Filter For Size Dozer-Ii , Fan Blade For Size Dozer-Ii , Fuel Filter For Air Compressor , Oil Filter For Air Compressor , Air Cleaner Inner And Outer For Air Compressor , Rear Indicator For Ssl Bobcat , Oil Filter For Ssl Bobcat , Fuel Filter For Ssl Bobcat , Hyd Filter For Ssl Bobcat , Horn 12V For Ssl Bobcat , Starting Relay For Ssl Bobcat , Oil Filter For Multi Purpose Tractor , Fuel Filter For Multi Purpose Tractor , Hyd Filter For Multi Purpose Tractor , Horn For Multi Purpose Tractor , Ignition Switch For Multi Purpose Tractor , Hyd Hose For Multi Purpose Tractor , Side Indicator For Multi Purpose Tractor Total Quantity : 357

BRR:8648310 Bids Are invited for Accu Check Glucometer , Oxygen Bull Nose Fitting , Thermometer Mercury , Bpl Blood Pressure Recording Unit Digital , Compressor Motor Sterilizer , Transformer Total Quantity : 12

BRR:8647775 Supply Of Kit For 355 Mm Air Brake Cylinderkit For 355 Mm Air Brake Cylinder,Kit For 355 Mm Air Brake Cylinder Consisting Of 2 Items.:- 1). Piston Packing- 01 Nos 2). Wear Ring - 01 Nos As Per Item No. 4 & 5 Of Rdso Drg.No Wd-92051-S-06, Alt-05 And Confirming To Rd So Specification -Appendix-B Of 02-Abr-02 With Amendment- No. 4 Of Sept. 2016. Note:- 1.Materials S Hall Be Procured From Rdso Approved Vendor Only. 2.Manufacturer Test Certificate And Warranty Certif Icate Should Be Submitted Along With Supply. [ Warranty Period: 30 Months After The Date Of Delivery ] ]

BRR:8647764 Supply Of Refrigerator Single Door 183 Ltr Capacity, Direct Cool, 5 Star Rated With Operating Voltage 230V,50Hz, Rated Power Input:60W, Rated Current:1.0A, With Digital Inverter Compressor Of 20 Years Minimum Warranty, With Eco- Friendly Refrigerant Preferably R-600A, Confirm To Is:17550( Part1) Of Make: Samsung Model.No.Rr20d2825cr/Nl Of Makes: Samsung, Whirlpool, Lg, Onlyrefrigerator Single Door 183 Ltr Capacity, Direct Cool, 5 Star Rated With Operating Voltage 230V,50Hz, Rated Power Input:60W, Rated Current:1.0A, With Digital Inverter Compressor Of 20 Years Minimum Warranty, With Eco- Friendly Refrigerant Preferably R-600A, Confirm To Is:17550( Part1) Of Make: Samsung Model.No.Rr20d2825cr/Nl Of Makes: Samsung, Whirlpool, Lg, Only,Refrigerator Single Door 183 Ltr Capacity, Direct Cool, 5 Star Rated With Operating Volt Age 230V,50Hz, Rated Power Input:60W, Rated Current:1.0A, With Digital Inverter Compressor Of 20 Years Minimum Warranty, With Eco- Friendly Refrigerant Preferably R-600A, Confirm To Is:17550( Part1) Of Make: Samsung Model.No.Rr20d2825cr/Nl Of Makes: Samsung, Whirlpool, Lg, Only [ Warranty Period: 30 M Onths After The Date Of Delivery ] ] => Limited

BRR:8647738 Supply Of Procurement Of Spares For Track Machinesprocurement Of Spares For Track Machines,Tension Screw As Per Plasser Part No Wn111.M20.320.1 , Make-Plasser Or Its Equivalent. ] , Elbow Joint Carrying Side Complete As Per Plasser Part No Rm08b.27.0200 ,Make-Plass Er Or Its Equivalent ] , Spacer As Per Plasser Part No 64.09.5208 , Make-Plasser Or Its Equivalent. ] , U Clamp As Per Plasser Part No 64.09.5248 , Make-Plasser Or Its Equivalent. ] , Cover As Per Plasser Part No :64.13.4017, Make :Plasser Or Its Equivalent ] , Spacer Ring As Per Plasser Part No: 354.031.1520, Make : Plasser Or Its Equivalent ] , Securing Chain As Per Plasser Part No:354.032.0310, Make : Plasser Or Its Equivalent ] , Front Plough As Per Plasser Part No. Crw800.901A-Li-Sp1000, Make - Plasser Or Its Equ Ivalent ] Page 1 Of 10 Run Date/Time: 14/10/2025 17:01:13Stores/South Central Rly Tender Document , Front Plough As Per Plasser Part No. Crw800.901A-Re-Sp1600, Make - Plasser Or Its Eq Uivalent ] , Intermediate Shaft As Per Plasser Part No Ssp70.01-606 , Make-Plasser Or Its Equivalent ] , Locking Device As Per Plasser Part No. Glf311.1050, Make- Plasser Or Its Equivalent ] , Tension Lock As Per Plasser Part No Wn120.M36x1.5.M36x1.5L-3 , Make-Plasser Or Its Equ Ivalent. ] , Locking Ring As Per Plasser Part No Wn121-30,5.40.97,5-1 , Make-Plasser Or Its Equivalent . ] , Crotch As Per Plasser Part No Wn160-38.475-1 , Make-Plasser Or Its Equivalent. ] , Crotch As Per Plasser Part No Wn160-38.475-1L , Make-Plasser Or Its Equivalent. ] , Chain As Per Plasser Part No 12B-2Din8187 ,Make-Plasser Or Its Equivalent. ] , Flange As Per Plasser Part No Dl63.3161 , Make-Plasser Or Its Equivalent. ] , Lining Roll As Per Plasser Part No 63.11.1010 , Make-Plasser Or Its Equivalent. ] , Intermediate Piece As Per Plasser Part No Wn100.42-5A , Make-Plasser Or Its Equivalent. ] , Top & Inner Side Support Roller Pin 3X As Per Plasser Part No. Wn106.45G6.205.1, Make - Pl Asser Or Its Equivalent. ]

BRR:8647633 Supply Of Vb Trainset Hvac Spare Partvb Trainset Hvac Spare Part,Vb Trainset Hvac Spare Part Vfd Emergency Inv Unit, 1.6Kva As Per Rdso Specificati On No. Rdso/Pe/Spec/Emu/0196-2019 (Latest) Along With Latest Annexure And Addendum/Corrigendu M To M/S. Medha Item Code Sp675uv2101042 Suitable To Vb Rakes [ Warranty Period: 30 Months Aft Er The Date Of Delivery ] ] , Vb Trainset Hvac Spare Part Vfd Compressor Unit 7.6 Kva As Per Rdso Specification No. Rdso/Pe/Spec/Emu/0196-2019 (Latest) Along With Latest Annexure And Addendum/Corrigendum To M/S. Medha Item Code Sp675uv2101041 Suitable To Vb Rakes. [ Warranty Period: 30 Months After Th E Date Of Delivery ] ] , Vb Trainset Hvac Spare Part Rmpu Control Unit As Per Rdso Specification No. Rdso/ Pe/Spec/Emu/0196-2019 (Latest) Along With Latest Annexure And Addendum/Corrigendum To M/S. Med Ha Item Code Sp675uv2501081 Suitable To Vb Rakes [ Warranty Period: 30 Months After The Date Of Delivery ] ]

BRR:8647583 Supply Of Filter Element (Main Compressor) For Vande Bharat Train Coaches To Kbi Pt. No:- 8.000.8.923.716.5.To Icf Spec Nos. Icf/Md/Spec-319Filter Element (Main Compressor) For Vande Bharat Train Coaches To Kbi Pt. No:- 8.000.8.923.716.5.To Icf Spec Nos. Icf/Md/Spec-319,Filter Element (Main Compressor) For Vande Bharat Train Coaches To Kbi Pt. No:- 8.000.8.92 3.716.5.To Icf Spec Nos. Icf/Md/Spec-319 [ Warranty Period: 30 Months After The Date Of Delivery ] ]

BRR:8647385 Supply Of Lp Piston Assembly Of Dia.150Mmlp Piston Assembly Of Dia.150Mm,Lp Piston Assembly Of Dia.150Mm As Per Elgis Part No.070311740 For M/S.Elgi Make Ma In Air Compressor, Model-Rr20070 Of (M)., [ Warranty Period: 30 Months After The Date Of Delivery ] ]

BRR:8646606 Tender for Repairing/Rewinding Of Body Fan Motor ,Swing Blower Motor ,Hoist Blower Motor ,Crowd Blower Motor And Compressor Motor For Ekg-5A Shovel For The Year 2025-26 Of Birsa Ocp.

BRR:8646569 Tender for Construction Of Vacuum Pump And Air Compressor Room In Al-Afia Civil Hospital At Mandikhera In Nuh Distt. (Re-Invited)

BRR:8645998 Tender For Special Repair To Building No P-117 Of Comd Hosp (Ec) Under Ge (A) Kolkata.; 1 Demolition of brick or stone / boulder work built in cement mortar including all quoins, arches, pillarsetccomplete upto 4th storeyall as specified and directed 2 Material and labour brick work withflyash brick straight or curved on plan exc. 6m mean radius , built in cement mortar (1:6) completeall as specified and directed.(Old size bricks) 3 M & L for brick work with fly ash brick old size, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and directed.(Old size bricks) 4 Taking down cement plaster of any description, including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.(Upto 4th storey) 5 M&L for Rendering 15 mm thick in CM (1:6) on other than fair face of brick work or concrete surfacesand finished the surface even and smooth without using extra cementto match the existing surface all complete all as specified and directed.(upto 04 storey High of building) 6 M&L for plaster on ceiling 5 mm thick in cement mortar (1:3) onconcrecte surface , surface finished even and fair with out using extra cement complete all as specified and directed. 7 M&L for Rendering 20 mm thick in two layers (Top 08 mm thick rendering coat mixed with water proofing compound shall belaid over 12 mm thcik plastered surface) with CM (1:4) onof brick work or concrete surfaces finishedthe surface even and smooth without using extra cementto match the existing surfacecomplete all as specified and directed.(upto 04 storey High of building) Note: WPC shall be measured and paid separately 8 Supply only Integral water proofing compound complete all as specified and directed.(upto 12 storey High of building) 9 M&L complete removal of old decorated surfaces and Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed. 10 M&L for preparation of new plastered surfacesand applying two coat of white wash on ceiling complete all as specified and directed.(upto 04 storey High of building). 11 M&L preparation of old surface and applying one coats of white wash on ceiling to match with the new one all complete all as specified and directed.(upto 04 storey High of building) 12 M&L for preparation of new plastered surfaces of wall and applying two coat of acrylic distemper over a coat of primerover 3 mm thick wall care putty complete all as specified and directed.(upto 04 storey High of building). 13 M&L preparation of old decorated surface by complete removal of existing treatment, washing, rubbing, stopping etc and applying two coat of oil emulsion distemper over a coat of primer to match with the new suface on wall.complete all as specified and directed.(upto 04 storey High of building). 14 Material & labour preparation of old steeland iron surfaces of any description areaexc 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed. 15 Dismantiling of floor hearthincl cement mortar (but not backing), and rubbish off the premises (out of MOD land), complete all as specified and directed.(upto 04 storey High of building) 16 M&L non-skid joint free ceramic (coloured) tiles 7-8mm thick area of each tiles exeeding 0.06sqm but n.exceeding 0.11 sqm in toilet/bath floor etc.set and jointed and jointed with adesive and pointed in epoxy grout with spacers complete all as specified & as directed includingScreed bed or bedding layer15 mm thick in cement mortar (1:6) for laying floor finishescomplete all as specified and directed. 17 M&L non-skidjoint free ceramic (coloured) tiles 7-8mm thick area of each tiles exeeding 0.18sqm but n.exceeding 0.36 sqm in floor etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified & as directed incl screed bed 15 mm(1:6). 18 M&L non-skidjoint free ceramic (coloured) tiles 7-8mm thick area of each tiles exeeding 0.18sqm but n.exceeding 0.36 sqm in skirting etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified & as directed incl screed bed 10 mm(1:4). 19 M&L Glazed ceramic coloured wall tiles of sizes of (450X350X7mm / 450 X300X7) mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to matchthe shade of tiles . complete all as specified and directed.(Upto four storey)including 10mm thick screed bed in CM (1:3). 20 M & L for Makrana white marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types complete all as specified and directed. 21 Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situationscomplete all as specified and directed. 22 Demolition of cement concrete of any description and in any position not other wise specifiy provided for complete all as specified and directed.(upto 12 storey High of building) 23 M&L for two coats of synthetic enamel paint over a coat of pink primer areaexc.10cm width or girthover new wooden surfacesincluding preparationof surface complete complete all as specified and directed.(for upto 04 storey High building) 24 Dismantling cast iron or re-inforced concrete drain pipes of 100mm bore, jointed in cement mortarcomplete all as specified and directed. (upto 12 storey High of building) 25 S&F 110mm bore PVC(SWR) pipe single socket in any length rubber ring jointscomplete all as specified and directed.(for upto 12 storey Highbuilding) 26 S&F 110mm bore PVC(SWR) pipe bend single socketcomplete all as specified and directed.(upto 12 storey High of building) 27 S & F 110mm PVC (SWR) WC connector bent typecomplete all as specified and directed.(for upto 12 storey High building) 28 S&F PVC (SWR) 110 mm bore junction single, (Single T) equal or unequal complete all as specified and directed. 29 S&F PVC (SWR) 110 mm bore junction double, (double T) equal or unequal complete all as specified and directed. 30 S&F PVC (SWR) 110 mm bore branch piece, double (double Y) equal or unequal complete all as specified and directed. 31 Taking down of Chowkhat with shutter (without taking of shutter) door / window/ventilater area n.exc 1.5 Sqmcomplete all as specified and directed. 32 Taking down of Chowkhat with shutter (without taking of shutter)door/window area exc 1.5 Sqm but not exc 4.0 Sqm complete all as specified and directed. 33 S&F for Factory made single extruded WPC(Wood polymer composite) solid door Frames of size 45 x 70mm comprising of virgin PVC polymer of K value 58-60(Suspension grade), calcium carbonate & natural fibres and non-toxic additives fabricated with mitre joints after applying PVC solvent cement and screwd with full body threaded star headed SS screws having minimum frame density of 750 Kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), mimimum compressive strength of 58 N/Sqmm and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof & fire retardant & fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. 34 S & F S&F for Factory made single extruded WPC(Wood polymer composite) solid flush door shutter of 30mm size comprising of virgin PVC polymer of K value 58-60(Suspension grade), calcium carbonate & natural fibres and non-toxic additives fabricated with mitre joints after applying PVC solvent cement and screwd with full body threaded star headed SS screws having minimumdensity of 650 Kg/cum, screw withdrawal strength of 1800 N(Face) & 900 N (Edge), mimimum compressive strength of 50 N/Sqmm, modulas of elasticity 850 N/sqmm & resistance to spread of flame of class A category with property of termite/borer proof , water/moisture proof & fire retardant & fixing with SS butt hinges of required size with necessary full body threaded star headed counter sunk SS screws,complete all as specified and directed. 35 S&F 125 mm long Aluminium handles, cast type, anodised complete all as specified and directed.(for upto 04 storey Highbuilding) 36 S&F 100 mm Butt hinges, extruded alu minium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed. 37 S&F 100 mm long Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.(for upto 04 storey Highbuilding) 38 S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.(upto 04 storey High of building) 39 S&F 35mm thick 2nd class hard wood glazed & skleton shutters, open rebated and prepared to received glass, gauge etc.(without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part-I section 8, clause 8.20(a) complete all as specified and directed.(for upto 04 storey highbuilding) 40 S&F 200 mm long Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed. 41 S&F 300 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast al alloy complete all as specified and directed.(for upto 04 storey High building) 42 S&F 10mm thick toughened glass as in hinged doors,partitions, automatic doors and similar work including cutting to shape,drilling holes required complete all as specified and directed. 43 S&F floor power door stopper overall length of cover plate 150mm of zink alloy body and fixed in floor complete all as specified & as directed. Make : Prayag Cat Part No DSZ-PW6-SS or equivelant make as approved by GE. 44 S&F Stainless steel handles 150mm long, bright polished complete all as specified and directed. 45 S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified & as directed. 46 Supply and fix Aluminium anodised (powder coated) Three track sliding window frame with shutters with (2 nos glazed and one wire gauzed shutter) including all necessary joining cleats, hold fast, rubber gasket, snap beading and locking arrangements fixed with screws to wall etc. complete with glazing and including 5 mm thick tinted glass to aluminium frame work using rubber gasket and including stainless steel wire cloth of 0.36 mm dia & average width of aperture 1.40mm with staple or suitable fillets wire mesh fitted with screws and washers including deco aluminium grill size complete all as specified and directed with the following section of frame and shutter:- (A) Sections for shutter :- (i) Vertical section 38 x 20 x 1.10 mm thick. (ii) Interlock section 38 x 20x 1.50 mm / 38 x 28.94 x 1.5 mm thick. (iii) Top/ Bottom section 41 x 20 x 1.20 mm thick.(B) Section for frame :- (i) Top & Sides 92.36 x 29.70 x 1.50 mm thick. (ii) Bottom 92.36 x 29.70 x 1.50 mm thick complete all as specified and directed. 47 S&F in repairs powder coated aluminumwindow (double shuttered double leaf) side hung type with stainless steel butt hinges, one shutter glazed and other shutter gauzed , rubber gasket, stopper , With aluminium grills of 70mm aperture, aluminium anodised handle 100mm long ,aluminium anodised tower bolts 100mm longand peg stay etc, size of aluminum frame shall be (100mmx38mmx1.55mm)and shutter frame shall be (20mm X40mm X1.55mm)after and including dismantling of existing unserviceable steel window complete all as specified and directed.Note : 1 No Glazed shutter(double leaf), 1 No Gauged shutter (double leaf) and aluminium grill shall constitute one unit. 48 S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required hooks (stay), heavy, for large gates; hook and pintle hinges large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans;plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified & as directed. (upto 12 storey High of building) 49 M&L for 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.(upto 04 storey High of building) 50 S&F 100 mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.(upto 04 storey High of building) 51 S&F Hasp and staple 75mm, safety type, aluminium with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.(upto 12 storey High of building) 52 Taking out/Stripping of old Roof treatment membranes/Tar felt incl layer ofcement mortar of any type carefully from roof surfaces (without damaging roof ) and incl preparation of old roof surfaces by picking, sweeping, cleaning and washing down with water to remove dust & receive new treatment complete all as specified and directed. 53 M&L cutting out cracks to V section in existing roofs of terracing cleaning out, wetting, grouting, with cement sand slurry (1:3) complete all as specified and directed.(upto 12 storey High of building) 54 Providing and carry out waterproofing treatment to sound, moisture free concrete surface using Nitoproof 600PF - Liquid applied single component pitch free polyurethane coating capable of bridging substrate cracks upto 2 mm. System includes proper surface preparation to remove loose dust, dirt, loose mortar, curing compound etc., and application of Nitoproof WB Primer, Water dispersible epoxy primer followed by two coats of Nitoproof 600PF coverage @ 2.0 kg/m2 to achieve 1.5 mm WFT in two coats followed by laying of separation layer of 120 gsm non-woven geotextile layer before carry out protection screed etc. complete including all tools and tackles as per manufacturer’s specification. Nitocote 600PF cured material shall be having crack bridging of 2 mm, Elongation (ASTMD 412) – >600 %, Tensile Strength (ASTM D412) –2.5 N/mm2, Recovery from Elongation (ASTM D412) – 95 %, 85% Solid Content, Tear Resistance (ASTM D624) – 15 Kn/m, Shore A Hardness (ASTM D2240) – 60, Water vapour transmission- 0.6 g/m2/hr, Water Permeability @ 5 Bar (BS EN 12390)-Nil, Service Temperature – -40°C to 70°C, Flash Point > 70 °C, Viscosity-60p, Specific Gravity-1.5. The item rate shall be including of all kinds of labour, tools & tackle, machineries, lead & lift, mathadi charges, curing, wastages, consumable, cleaning, shifting of debris outside the site premises, surface preparation, etc. complete as per design, drawing & instructions of EIC. Cost of 120 gsm non-woven geotextile and 75mm Screed concrete hall be paid separately. 55 Supply & Laying Geotextiles of 120 Gsm over the waterproofing coating to avoid damage during screed casting complete as per specification and as directed. 56 Supply & laying of maximum 75 mm thick (at RW outlet) protective screed over the waterproof coating at proportion of 1:2:4 admixed with suitable integral waterproofing compound conforming IS 2645:2003 @ 200ml per bag of cement and reinforced with PP fibres with proper slope towards RW pipes. Green stage saw cutting on the screed will be done in panels (3m X 3m) with a groove size of 10mm X 15mm etc complete all as specified and directed. 57 Taking up or down 20mm steel tubing and connections, including cleaning for re-fixing or removal complete all as specified and directed. 58 Taking up or down 25mm steel tubing and connections, including cleaning for re-fixing or removal complete all as specified and directed. 59 Taking up or down 40mm or 50mm steel tubing and connections, including cleaning for re-fixing or removal complete all as specified and directed. 60 Cutting chases, pinning in. making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing etc., and making good, cutting not exc 10 cm girth complete all as specified and directed. 61 S&F CPVC pipes 20 mm outer diameter of SDR 11 & plain CPVC SDR 11 fittings as in walls, ceiling, floor, etc. complete all as specified and directed. 62 S&FCPVC pipes 25 mm outer diameter of SDR 11 & plain CPVC SDR 11 fittings as in walls, ceiling, floor. etc complete all as specified and directed.(upto 12 storey High of building) 63 S&L in 40 mm bore (Outer dia) CPVC pipes ofSDR 13.5 and plain CPVC SDR 11 fitting fixed on wall or floor, ceiling or laying in floors complete all as specified and directed. 64 S&F 20 mm bore CPVC Male Brass Threaded Adaptor (MTA/ MBTA) comlete all as specified and directed. 65 S&F 25 mm bore CPVC Male Brass Threaded Adaptor (MTA/ MBTA) comlete all as specified and directed. 66 S&F 20mm bore CPVC Female Brass Threaded Adaptor (FTA/ FBTA) comlete all as specified and directed. 67 S&F 25mm bore CPVC Female Brass Threaded Adaptor (FTA/ FBTA) comlete all as specified and directed. 68 S&F in repair 25 mm bore in repair gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipescomplete all as specified and directed.(upto 12 storey High of building) 69 S&F 15mm bore in repair Brass CP bib cockwith crutch or butterfly handle chromium plated complete all as specified and directed.(upto 12 storey High of building) 70 S & F in repairs 15 mm Dia CP stop cock(concealed type) ,with crutch handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. (upto 12 storey High of building) 71 S & F in repairs 15 mm Dia CP angular cock,with crutch handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. (upto 12 storey High of building) 72 S&F PVC connection 15 mm sizepipe withPTMT nut of Length 600mmcomplete all as specified and directed.(upto 12 storey High of building) 73 S&F in repair brass CP Shower roses in repair with or without swivel joints, 125mm size, includingfixing to steel pipes or unioncomplete all as specified and directed.(upto 12 storey High of building) 74 S&F Chromium plated Soap dish, fixed to plugs with chromium plated brass screwscomplete all as specified and directed.(upto 12 storey High of building) 75 S & Fglass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. 76 S&F PTMTtubular towel rail 450mm long, with and includingCP brass screws and wooden/plastic cleats, weight not less than 170 gms complete, fixed in wallcomplete all as specified and directed.(upto 12 storey High of building) 77 S&F in repair Vitreous China wash basin (colour white), angle back, size (550X400) mm, excluding taps, waste,chain and plug and porcelain stopper but including cutting for and pinning in ends of and brackets, waste pipe & CP Brass waste coupling of 32mm diacomplete all as specified and directed. Note : Rate quoted under this item deemed included fixing ofplug and chain and connecting up to supply pipes, wastes or traps etc. complete all as specified and directed.(upto 12 storey High of building) 78 S&Fin Repairs vitreous China wash down water closet pan ( padestal pattern) incl Pvc seat cover , (excluding fixing bolts, flushing cistern and flush pipe) , including connection to drain ( or outgoing pipe) and to flushing pipe , etc., complete all as specified and directed. 79 S&F in repairs vitreous china squatting pan of “Orissa” pattern of size 580 mmx 440mm white with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete all as specified and as directed. 80 S&F (600 mm x 450 mm) bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washerscomplete all as specified and directed.(upto 12 storey High of building) 81 S&F in repair 15 mm borePillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot or ‘Cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixedcomplete all as specified and directed.(upto 12 storey High of building). 82 S&F in repair 32mm dia waste fittings, brass, chromium platedfor glazed ware sinks, basins, etc with long screwed sganks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. (upto 12 storey High of building). 83 Supply only 10 litres capacity PVC valveless, syphonic action type,flushing cistern, white colour, low level, white with inlet, ball valve, float and handle including brackets duly painted, 32mm dia PVC flush pipecomplete all as specified and directed.(upto 12 storey High of building). 84 S&F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement of 100mm dia complete all as specified and directed.(upto 12 storey High of building). 85 S&F PTMT in repair grating of 100mm dia, fixed with cement mortar (1:3). complete all as specified and directed. (upto 12 storey High of building). 86 S&F in replacement Harrison rails, mild steel, anodised aluminum alloy with fixing brackets, stops, rollers etc. complete all as specified and directed. (upto 12 storey High of building) 87 Demolition of RCC of any description and in any position not otherwise specifiy provided forin complete all as specified and directed. 88 Use and waste offormwork to sides and soffit of beams, lintels, cantilevers, shelves etc for rough finished surface complete all as specified and directed.(upto 04 storey high of building) 89 S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.(upto 04 storey High of building) 90 S&F TMT bars 8 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clipscomplete all as specified and directed.(upto 04 storey High of building) 91 M&L for RCC for M 25 (Nominal Mix) using 20 mm graded crushed stone aggregate as in parapets, balcony, chajjas and similar work complete all as specified and directed.(upto 04 storey of building). 92 M&L for 75mm thick PCC (1:3:6), type C2, using 40mm graded stone aggte as in plinth protection surfae finished even & smooth without using extra cement as complete as specified and directed. 93 M&L for PCC (1:5:10) Type E2 (using 40mm graded crushedstone aggregate) as in filling sunken floor complete all as specified and directed.(upto 04 storey High of building) 94 S&F for 110mm dia PVC (SWR) vent cowl any radius complete all as specified and directed. 95 Dismantling removing all unsound concrete, plastered material by chipping/chiseling gently at all effected and adjoining areas of concrete etc till sound surface is reached all various locations in building (upto 4 storied) subsequently cleaning the surfaces by hair brush and air blower and removing rubbish off the premises and disposing at the dumping site as approved by local authorities complete all as specified and directed . 96 Removing of concrete all around reinforcement bar upto 12 mm dia and over from behind the reinforcing bars average 25mm(but not less than 15mmair gap)by manual methods (using wire brushing ,chiseling etc) and applying chloride free rust removing chemicalon rusting steel reinforcement bar and removing all rust from steel reinforcement barby emery paper and cleaning the area thoroughly by water and allow it to dry andtotally rust free of reinforcement bar all as completeas per manufacturers instruction complete all as specified and directed. (upto 4 storied bldg). Make( Rust removing chemical ):- Reebaklens RR of FOSROC or equivalents solutions SIKA/STP as specified. 97 Material , labour and preparation of existing reinforcement surface by brushand application of two component epoxy zincrich primeron existing reinforcement surface ofminimum specific gravity 1.75, adhesive bond strength with steel is 1.50N/mm2and maximum coverage area 5.00 Sqm per litre. complete all as specified and directed.(upto 4 storied bldg). Make- Nitozinc primer of FOSROC or equivalents make as specified 98 Material and labourfor introducing new reinforcement bars upto 12 mm dia and over for structural connection in RCC beams, columns, lintel and slabs including power drilling holes of appropriate diameters in reinforced or plain cement concrete to a minimum depth of 150mm and upto 200mm including power drilling, fixing the reinforcement in position using epoxy, cleaning of loose dust by blowing air, sealing with epoxy cartridges etc complete all as specified and directed.(upto 4 storied bldg) 99 M&Lforsupply,mixingandplacementofmicro-concretecementbasedprepackedsingle component chloride free, sulphate free, non-shrink, free flow. elf compacting, ready to use after mixing water in specified proportion of Sika Rep Microconcrete-4 or renderoc-RG of Fosroc in required thickness as per manufactures instruction and all as directed. Compressive strength (ASTN C 109,cm cube) of 35 MPa at 28 days including application curing compound concrete WB manufactured by Fosroc of equivalent at various locations in Bldgs including necessary form work complete all as specified and directed.(upto 4 storied bldg) 100 M&L for providing and applying at two component structural grade polymer modified reinforcement mortar Fosroc Renderoc S2 or equivalent product of SIKA upto a thickness of 30 mm over a coat of epoxy resin bonding agent Nitobond EP. The cured mortar shall achieve a minimum compressive strength of 12N/mm2 in a day & 45 N/mm2 in 28 days with Flexural strength 8N/mm2 in 28 days Chloride diffusion coefficient shall be Nil after 24 hours when tested by Accelerated electrochemical chloride ion diffusion test method and the depth of carbonation shall be Nil after 24 hours when tested by Accelerated carbonation test. in addition to this percentage of water absorption should be 0.45 after 24 hours in immersion test at various locations in Bldgs complete all as specified and directed.(upto 4 storied bldg) 101 Material , labour forapplying of high efficiency polymeric resin base filmforming curing agent/compoundover concretesurfaceandmaximum coverage area 5.00 Sqm per litre as per manufacturers instruction complete all as specified and directed.(upto 4 storied bldg) Make:- Concure LP90 of FOSROC or equivalents solutions SIKA/STP/ Maruti / Choksey chemicals. 102 M&L for providing and applying a flexible expansion joint membrane of minimum 150mm wide and 1mm thick, expoband one (ExpobandH45) of FOSROC or equivalent over the prepared joint using a two part epoxy adhesive nitobond PC 40 of Fosroc or equivalent. The minimum tensile strength of the membrane should be more than 12 N/mm2 and elongation at break should be more than 400%. The installation of the membrane should be carried out complete all as specified and directed. 103 Bore packing of all the Spouts to be done with grouting admixture mixes with Cement Concrete / Mortar @225 ml per bag of Cement complete all as specified and directed. 104 S&Fshear connector of 8mm dia & requisite length on the surface to be repaired for the bonding between old and new concrete as per the locations instructed by the Engr-in-Charge. The shear connectors shall be of L shape and welded with existing reinforcement at least 100mm in length @ 200mm c/c both horizontally and vertical followed by coat of epoxy Zinc primer as per the specification mentioned complete all as specified and directed. 105 M & L for providing and inserting mild steel shear key bars/levelling gauges of required length and diameter in reinforced/plain concrete for drilling suitable holes in RCC Slab/ wall/ column/ beams toa depthas directed for anchoring steel reinforcement bars including washing with water inserting lokfix E of Fosroc or equivalent in the holes at various location in Bldgs complete all as per manufactures specification complete all as specified and directed. 106 M&L for providing grouting in RCC walls and slabs by drilling holes @300 mm c/c upto half of the wall depth in zigzag manner using a drill machine and fixing a nozzle of 20mm dia, for injecting of epoxy grout till therefusal of injected groutmaterial (grouting operation pressure shall be in between 2 to 4Kg per sq cm) followed by cutting the exposed nozzle so as to make the wall/ slab free from the grouting pipe and to seal the gap with polymer modified mortar complete all as specified and directed. 107 Material & Labour for applying Anti carbonation coating as per manufacturers specification of approved brand, manually using brushes on the hardened concrete/plastered surfaces after cleaning the surface and removing all loose particles, deposits etc complete including one coat of primer and two coats coatings complete all as specified and directed. 108 Material & Labour for Carbon Fibre Wrapping - Nitowrap CWS – 450 GSM Providing and carrying out Fosroc make carbon fibre wrapping Nitowrap CWS (450 GSM) - High Performance high strength, carbon fibre system for structural strengthening to R.C. members. Surface Preparation : Proper surface preparation to be carried out including cleaning, removal of loose material, dust etc, executing required repairing like epoxy injection grouting, polymer modified mortar, epoxy touching Putty , rounding off edges of structural members to 25mm etc . Application : Prepared substrate shall be primed with Nitowrap 30 epoxy primer supplied in pack size 4 Lit (Base-4.1 kg and Hardener -0.46 kg) at a coverage of 8-10 m2/litre/coat, allow the primer to cure for 24 hours followed by application of first coat of saturant Nitowrap 410 supplied in pack size 5kg ( Base - 3kg and hardener - 2kg) (having Tensile strength >30 MPa; Elongation > 2.1% ; Fibre strength > 4900 MPa ; Fibre E-Modulus >230 GPa & Flexural Modulus > 1700 MPa when tested as per ASTM D638 Type I and ASTM D 790 & Glass Transition Temperature > 50 °C as per ASTM E 1356) to be carried out at a coverage of 3.5 to 4 m2/lit/Coat at around 250 microns WFT, cutting of Nitowrap CWS (available in standard roll width of 500 mm and roll length of 50 mtr & 100 mtr) in required size and wrap over wet saturant keeping minimum 150 mm overlap, rolling the same using hard roller to impragnent saturant and again applying second coat of saturant using suitable bush or roller etc, completing as per specification and as directed by Engg.-in-charge. Nitowrap CW fabric used shall exhibit the following properties - fiber density of 1.8 g/cc, dry fibre thickness 0.40mm and shall have tensile strength > 4900 MPa ; tensile modulus > 230 GPa and ultimate elongation of 2.1%.The adhesion of the entire system(FRP Sheet, Saturant and primer combined) with concrete shall be > 3.5 MPa with concrete failure as per ASTM D 4541 complete as per specification and as directed. 109 Supply and applying two coats of High performance elastomeric cementitious waterproof coating sandwiched with 45 GSM glass fibre reinforcement on the entire floor and 1.0 m of all walls of all toilets as per following methodology:- Cleaning of exposed concrete surface by mechanical means or by hydro blasting to remove laitance, loose particles, contamination etc. which may hinder bonding. Coving of RCC joints with PCC (1:1.5:3) mixed with Integral Water Proofing compound. Applying one coat of Waterproofing membrane to concrete surfaces followed by application of 45GSM glass fibre on the wet surface. Applying second coat of waterproofing membrane at the right angles to the direction of first coat. Second coat shall be applied after the first coat gets dry. Sprinkling fine aggregate immediately after the application of second coat to get the mechanical key for protective plaster. Curing to Water proofing membrane to be carried out for minimum period of 3 days with ponding complete. The Water Proofing Product Should have Mixed density: 1.68g/cc (brushable consistency).Adhesion to concrete : >1N/mm2. Static crack accommodation: 1mm.( Fosroc/Elantas beck/Kunal conchem) ( Make : SIKA/FOSROC/Hindcon ) 110 S&F for pressed steel frames for doors size (125x60)mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. (upto 04 storey highbuilding)Note: Pressed steel frame shall be filled with PCC Type C0 (1:3:6, using 12.5mm graded crushed stone aggregate) and cost of same shall deemed to be included in the rate quoted by the tenderer in this item. 111 Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. 112 S&F for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed. (upto 04 storey High of building). 113 S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 MPa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. 114 Material & labour preparation of new steeland iron surfaces of any description areaexc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat ofred oxide and zinc chrome primer,complete all as specified and directed. (upto 04 storey High of building) 115 M & L for Cement concrete in saucer drains Type B1 (1:2:4) (20 mm graded stone aggregate) slope maintained as per site requirement complete all as specified and directed. 116 Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position,Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc exc 1000 ltr but not exc 2000 ltr 5 to 8 storey high of bldg complete in all respect as specified. 117 Supply and fixing of rotational moulded polythene water storage tank 1000 litre capacity ISI marked (cylindrical, vertical, double layered with closed top) hoisted and fixed in position including PVC float valve 20mm bore weight not less than 210gms complete all as specfied and directed. . 118 Supply and fixing2000 Litre capacity rotational moulded polyethylene water storage tanks (multilayer.cylindrical vertical with closed top)with and including 25 mm dia PVC float valve .hoisted and fixed in position including taking down old one and deposited to store yard 5 to 8 storey high of bldg complete all as specified and directed. 119 Dismantling of stone slabs and tiles of any description or thickness in floors,aprons etc laid, bedded & pointed in any mortar complete all as specified and directed. 120 Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.complete all as specified and directed. 121 Material and labour in repair for point wiring for Modular fitting,for one light/fan/call bell point with 1.5 sqmmPVC insulated FRLSH unsheathed copper cable multistranded conductor 1100 volts grade, concealed type, controlled by one way switchincluding 1.5 sqmm PVC FRLSH insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity earth wire connected to common earth dolly drawn through non metallic rigid PVC heavy duty concealed conduit of size 25mm dia with wall thickness not less than 1.6 mm including conduit accessories like bends, tees junction boxes, etc including 1.5 Sq mm, single core PVC insulatedunsheathed multi stranded copper conductor FRLSH cable (Green) 1100 Volts grade as earth continuity wire connected to earth dolly and including modular sunken galvanized terminal boxes of same make of switch/ socket/ regulator withsleek and curvy cover plates, for mounting ofmodularswitches, sockets, complete after and making good the distrubed surfaces as per the existing complete all as specified and as directed. 122 One light point / one fan point controlled by one, one way swtich. 123 All as per item No 121 here-in-before but for one light point controlled by two way switch complete as specified and directed. 124 All as per item No 121 here-in-before but for 3 pin 6 Amps socket modular type on the same board with 1.5 sqmm cable complete all as specified and directed. 125 All as per item No 121 here-in-before but for 3 pin 6 Amps socket modular type on the independent board with 1.5 sqmm cable complete as specified and directed. 126 All as per item No 121 here-in-before but for socket modular type 2 in 1,3 pin 5/15 Amp on independent board with 2.5 Sqmm PVCunsheathed copper cable and 2.5 sqmmcopper conductor cable as earth continuity conductor complete all as specified and directed. 127 All as per item No 121 here-in-before but for socket modular type 2 in 1,3 pin 5/15 Amp on independent board with 4.0 Sqmm PVCunsheathed copper cable and 4.0 sqmmcopper conductor cable as earth continuity conductor complete all as specified and directed. 128 Supply & Fixing in repair modular Socket, 6 Amp, 2/3 pin combined 2 module, complete all as specified and as directed. Make :- Carbtree/Legrand/Indo Asian/C&S. 129 Supply & Fixing in repair modular Socket, 6/16 Amp, 2/3 pin combined 2 module, complete all as specified and as directed.Make :- Carbtree/Legrand/Indo Asian/C&S. 130 Supply & Fixing in repair modular Switch Socket Outlet multipurpose 3 pin, 16 Amp and one pin, 6 Amp controlled by one Switch., 6/16 Amp, 2/3 pin combined 4 module, complete all as specified and as directed. Make :- Carbtree/Legrand/Indo Asian/C&S. 131 Supply & Fixing in repair modular switch single pole, one way,6 Amp, 1 module, complete all as specified and directed. Make :- Carbtree/Legrand/Indo Asian/C&S. 132 Supply & Fixing in repair modular switch single pole, one way,16 Amp, 1 module, complete all as specified and directed. Make :- Carbtree/Legrand/Indo Asian/C&S. 133 Supply & Fixing in repair modular switch single pole, two way,6 Amp, 1 module, complete all as specified and directed. Make :- Carbtree/Legrand/Indo Asian/C&S. 134 Supply & Fixing in repair modular Bell push 6 Amp, single pole, 1 module, complete all as specified and as directed. Make :- Carbtree/Legrand/Indo Asian/C&S. 135 Supply & Fixing in repair Bell multi music type, complete all as specified and as directed. 136 Supply & Fixing in repair Modular step type fan regulator,120W, 2 module, complete all as specified and directed. Make :- Carbtree/Legrand/Indo Asian/C&S. 137 Supply & Fixing in repair Modular White cover plate with frame, 2/3 modulecomplete all as specified and as directed. 138 Supply & Fixing in repair Modular White cover plate with frame, 4 modulecomplete all as specified and as directed. Make :- Carbtree/Legrand/Indo Asian/C&S. 139 Supply & Fixing in repair Modular White cover plate with frame, 6 modulecomplete all as specified and as directed. Make :- Carbtree/Legrand/Indo Asian/C&S. 140 Supply & Fixing in repair Modular White cover plate with frame, 8 modulecomplete all as specified and as directed. Make :- Carbtree/Legrand/Indo Asian/C&S. 141 Supply & Fixing in repair Modular White cover plate with frame, 12 modulecomplete all as specified and as directed. Make :- Carbtree/Legrand/Indo Asian/C&S. 142 Supply & Fixing in repair Modular Metal flush box 2 module complete all as specified and as directed. Make :- Carbtree/Legrand/Indo Asian/C&S. 143 Supply & Fixing in repair Modular Metal flush box 4 module complete all as specified and as directed. Make :- Carbtree/Legrand/Indo Asian/C&S. 144 Supply & Fixing in repair Modular Metal flush box 6 module complete all as specified and as directed. Make :- Carbtree/Legrand/Indo Asian/C&S. 145 Supply & Fixing in repair Modular Metal flush box 8 module complete all as specified and as directed. Make :- Carbtree/Legrand/Indo Asian/C&S. 146 Supply & Fixing in repair Modular Metal flush box 12 module complete all as specified and as directed. Make :- Carbtree/Legrand/Indo Asian/C&S. 147 Supply and fixing of Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings, complete all as specified and directed. 148 Supply and fixing ceiling rose surface bakelite three terminal(65 x 50)mm, PVC/Polycarbonate,isolated bodycomplete all as specified and directed. 149 Supply & fixing main stream battens fitting LED 20/22 watttube 4 feet long fixingon PVC/wooden round block complete with all accessories, prewired and flexible wire twin core from ceiling rose to terminal block complete all as specified and directed.Make: Havells cat part No LUMILINEPLUSBS20WLED865SPCS/ Century Jaquar /Crompton /Surya /Philips. 150 Supply & fixing main stream battens fitting LED 10 watttube 2 feet long fixingon PVC/wooden round block complete with all accessories, prewired and flexible wire twin core from ceiling rose to terminal block complete all as specified and directed.Make: CenturyJaquar/Crompton/Surya /Philips. 151 Supply & fixing LED bulb, B22 base, 9/10 watt, lumen output> 90Lum/W, CRI> 70, 5700-6500K Color temp, PF>0.9, THD< 20% suitable for lamp holder complete all asspecified and directedMake: Crompton/Havells/Surya. 152 Supply & fixing Surface mounted LED bulk head light fitting 9/10W, IP66, Iumen output >65 lum/watt, color temp 5700- 6500K,CRI>70, THD<20%, PF>0.9, operating voltage 220-240 V in high pressure die cast aluminum housing in polycarbonate cover with clear prismatic diffuser and lamp holders etc complete making connections, complete all as specified & directed.Make: Havells/Crompton/Bajaj 153 Supply & fixing bldg securitylighting ofLED 35watts high efficennt lighting solutionanodisedwith heat resistance with accessoriesprovidedincluding necessary electric connection with all accessories required for fixing/mounting with nut bolt washer & clamp support on GI pipe1.5 meters of suitable diametercomplete all as specified and as directed.Make: Crompton Cat Part no : TRP-400-35-57-SL-LM-NSR/Philips/Wipro. 154 Taking down geyser, any type and Refixing complete all as specified and directed. 155 Supply laying and testing of cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electic power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 50.0 Sqmm 3.5 core complete after taking down old XLPE cable of any size all as specified and directed. Make :- Havells/Polycab/KEI. 156 Supply laying and testing of cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electic power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16.0 Sqmm 4.0 core complete after taking down old XLPE cable of any size complete all as specified and directed.Make :- Havells/Polycab/KEI. 157 Material and labour for sub-main wiring (concealed type) for main DBs to sub DBs withPVC (FR-LSH) insulated & unsheathed two runs of 6.0 sq mm single core multi stranded copper conductor cable, 1100 Volt grade alongwith one run of6.0 sq mm PVC (FRLSH) insulated & unsheathed copper conductor cable, 1100 Volt grade, connected to common earth dolly asearth continuity conductor, including drawn through sutaible size of casing caping/PVC rigid conduit 25mm dia and having thickness 1.6 mm including accessories carefully and taken down old existing aluminium/copper sub main wiringwith accessories complete all as specified and directed.Make :- RR Kable/Havells/Polycab. Note :Three runs of 6.0 sqmm cable and one RM of PVC Conduit shall constitute one unit. 158 All as per Item No 151 here in before but of size 4.0 Sqmm complete all as per specified and as directed. 159 All as per Item No 151 here in before but of size 2.5 Sqmm complete all as per specified and as directed. 160 Supply and Fixing MCB, single pole, 240 Volts, of capacity (6-32 Amps) C series breaking capacity 10 KA complete all as specified and directed.Make :- Havells/L&T/Legrand. 161 Supply and fixing MCB SPN, 16 to40 Amps,240 Volts , breaking capacity 10KA complete all as specified and directed.Make :- Havells/L&T/Legrand. 162 Supply and fixing as MCB DB SPN (double door) 12 Ways including copper bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and directed. Make :- Havells/L&T/Legrand. 163 Supply and fixing MCB DB SPN (double door) 8 Ways including copper bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and directed.Make :- Havells/L&T/Legrand. 164 Supply and fixing MCB DB SPN (double door) 4 Ways including copper bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and directed.Make :- Havells/L&T/Legrand. 165 M&L for taking out unserviceable DBs of any type / capacity incl MCBs for fixing of new or old complete all as specified and directed. 166 Taking down Ceiling/Exhaust fan, sealing cable end, dismantling blades and removing fan and blades deposit to store for safe custody and refixing at the same position after repairing, greasing, changing of bearing/capacitor if required, complete all as specified and directed. 167 Material & Labour for Painting of exhaust fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. complete all as specified and directed. 168 Supply and fix power unit 32 Amps includingsocket 25AMp ,06 modulemetal box box for mounting of power unitcomplete as specified and directed. Make : Legrand Cat Part No.6755 58 /Havells/ ABB/ L&T. for Power unit , 6772 32 for socket 25 Amp and 6890 10 for metal box 6 Module 169 Earthing complete withgalvanised earth plate electrode 600x600x6.0mm thick, buried directly in ground (Earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.50 mtr below normal ground level connected with galvanised iron earth strip 32x6mm by means of bolts, nuts, check nuts and washer of galvanised iron or steel complete with 40 mm dia GI light grade protection pipe, 20mm dia GI medium grade watering pipe with funnel including charcoal, dust, salt, PCC M-15 type B1 in pit with angle iron (25x25x3)mm frame work with precast RCC 1:2:4 type B-1 cover reinforced with 8mm dia TMT bars @ 150mm C/C both ways and 12mm dia MS fabricated handle, test piont etc. in and including light frade GI protection pipe 40mm bore up to 5m lenght for drawing in earth lead wire , all as shown in electrical plate No.3of SSR Part-1 complete with necessary earth work in any type of soil, removal to a distance not exc. 50m, testing on completion complete all as specified & directed.

BRR:8645844 Bids Are invited for Electrical Dryer , Thin Slivering Machine , Bamboo Coil Making Machine , Bamboo Coil Finishing Machine , Treatment Tank Made By Ss And Dyeing Tank , Compressor 3 Hp With Spry Gun And Horse Pipe , Spray Booth , Wood Turning Lathe Machine With Chuk , Disc Belt Sander Machine , Bamboo Charcoal Vinegar Making Machine , Laser Engraving Machine Rotary Attachment , Hand Drill Mc , Hand Drill Mc Heavy Duty , Cordless Drill And Driver , Drill Stand , Table Vice , Clamps Or Carpentry Vice , Hand Splitter , Mitre Saw Bosch Gcm10 , Hole Saw 25Mm , Hole Saw 29Mm , Hole Saw 35Mm , Hole Saw 44Mm , Tools Box , Angle Grinding Machine , Random Orbit Sander , Portable Jig Saw , Portable Circular Saw , Marble Saw With Circular Saw , Poratble Planner , Table Saw , Table Grinding Machine , Spray Gun Pilot , Vertical Sander , Pneaumatic Pin Gun Plier , Router , Router Blade , Plam Router , Portable Band Saw , Racipsaw , Scroll Saw Total Quantity : 143

BRR:8645606 Bids Are invited for 1. SHAFT,SDC125/150 MATERIAL: EN8, FOR PUMP, TYPE: HORIZONTAL SPLIT CASING, CAPACITY: 152 M3/HR, HEAD: 55 M, SPEED: 1470 RPM, INPUT PO WER RATING: 30 KW TYPE/MODEL :SDC 125/150, 2. SHAFT SLEEVE,SDC125/150 MATERIAL: EN8, FOR PUMP, TYPE: HORIZONTAL SPLIT CASING, CAPACITY: 152 M3/HR, HEAD: 55 M, SPEED: 1470 RPM, I NPUT POWER RATING: 30 KW TYPE/MODEL :SDC 125/150, 3. WATER THROWER,SDC125/150 MATERIAL: CAST IRON, FOR PUMP, TYPE: HORIZONTAL SPLIT CASING, CAPACITY: 152 M3/HR, HEAD: 55 M, SPEED: 1470 RPM, INPUT POWER RATING: 30 KW TYPE/MODEL :SDC 125/150, 4. GLAND,SDC125/150 MATERIAL: CAST IRON, FOR PUMP, TYPE: HORIZONTAL SPLIT CASING, CAPACITY: 152 M3/HR, HEAD: 55 M, SPEED: 1470 RPM, IN PUT POWER RATING: 30 KW TYPE/MODEL :SDC 125/150, 5. LANTERN RING,SDC125/150 MATERIAL: PLASTIC, FOR PUMP, TYPE: HORIZONTAL SPLIT CASING, CAPACITY: 152 M3/HR, HEAD: 55 M, SPEED: 1470 RP M, INPUT POWER RATING: 30 KW TYPE/MODEL :SDC 125/150, 6. WATER THROWER ORING, SDC125/150 MATERIAL: RUBBER, FOR PUMP, TYPE: HORIZONTAL SPLIT CASING, CAPACITY: 152 M3/HR, HEAD: 55 M, SPEED: 1470 RPM, INPUT POWER RATING: 30 KW TYPE/MODEL :SDC 125/150, 7. SHAFT,SDB125/150 MATERIAL: EN8, FOR PUMP, TYPE: HORIZONTAL SPLIT CASING, CAPACITY: 220 M3/HR, HEAD: 29 M, SPEED: 1450 RPM, INPUT PO WER RATING: 20 KW TYPE/MODEL :SDB 125/150, 8. SHAFT SLEEVE,SDB125/150 MATERIAL: EN8, FOR PUMP, TYPE: HORIZONTAL SPLIT CASING, CAPACITY: 220 M3/HR, HEAD: 29 M, SPEED: 1450 RPM, I NPUT POWER RATING: 20 KW TYPE/MODEL :SDB 125/150, 9. WATER THROWER,SDB125/150 MATERIAL: CAST IRON, FOR PUMP, TYPE: HORIZONTAL SPLIT CASING, CAPACITY: 220 M3/HR, HEAD: 29 M, SPEED: 1450 RPM, INPUT POWER RATING: 20 KW TYPE/MODEL :SDB 125/150, 10. GLAND,SDB125/150 MATERIAL: CAST IRON, FOR PUMP, TYPE: HORIZONTAL SPLIT CASING, CAPACITY: 220 M3/HR, HEAD: 29 M, SPEED: 1450 RPM, IN PUT POWER RATING: 20 KW TYPE/MODEL :SDB 125/150, 11. LANTERN RING,SDB125/150 MATERIAL: PLASTIC, FOR PUMP, TYPE: HORIZONTAL SPLIT CASING, CAPACITY: 220 M3/HR, HEAD: 29 M, SPEED: 1450 RP M, INPUT POWER RATING: 20 KW TYPE/MODEL :SDB 125/150, 12. WATER THROWER O-RING,SDB125/150 MATERIAL: RUBBER, FOR PUMP, TYPE: HORIZONTAL SPLIT CASING, CAPACITY: 220 M3/HR, HEAD: 29 M, SPEED: 1450 RPM, INPUT POWER RATING: 20 KW TYPE/MODEL :SDB 125/150 Total Quantity : 124

BRR:8645488 Bids Are Invited For Repair, Maintenance, And Installation Of Plant/ Systems/Equipments (Version 2) - Industry Unit; Service Contract For Services Of Co2 Booster Compressor Plc Systems, In Ammonia Plant, At Rcf Thal, On Proprietary Basis, For Two Years; Buyer

BRR:8645370 Tender For Sinking Of Machine Boring Deep Tubewell With Platform And Soakpit Near The House Of Ranjit Biswas At Part No 10 237 - 1 Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I).(A) PVC Pipes.80 mm dia 2 Supplying PVC strainer of approved make with adapter conforming to I.S.12818 specifications.(iii) 80 mm dia. 3 Supply of G. I. pipes of TATA make including necessary sockets.(e) 40 mm dia.(ii) Medium quality 4 Supply of G.I. reducing socket with I.S.I. mark.(vii) 80 mm 5 Supply of G.I. plain tee of approved brand and make.(v) 40 mm 6 Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I).(J) Threaded End Cap.40 mm 7 Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I).(J) Threaded End Cap.80 mm 8 Supplying, fitting and fixing popular Maya pump no-6 or similar.(i) For 40 mm dia. tube well 9 Supplying,fitting and fixing check valve (horizontal) G.M. tested to 21 kg per sq. cm.(v) 40 mm 10 Labour for boring through any type of soil for sinking tube well of required dia. with top enlargement by rig boring system (either by reserve circulation or by direct rotary method) including hire charges and labour for rig machine, tools and plants, staging, force pumping set and making arrangement for water required for boring etc. complete and lowering of pipes, strainers, blind pipes etc. complete.(a) For depth upto 250 metre for 100 mm dia. Tube well with top enlargement of 200 mm dia.(upto 50 metre).(ii) Next 50 metre 11 Labour for boring through any type of soil for sinking tube well of required dia. with top enlargement by rig boring system (either by reserve circulation or by direct rotary method) including hire charges and labour for rig machine, tools and plants, staging, force pumping set and making arrangement for water required for boring etc. complete and lowering of pipes, strainers, blind pipes etc. complete.(a) For depth upto 250 metre for 100 mm dia. Tube well with top enlargement of 200 mm dia.(upto 50 metre).(i) First 50 metre 12 Washing and developing tube well with air compressor pump and engine for 8 (eight) hours continuous pumping per day with necessary arrangements for testing the yield in gallons per hour with V notch including hire and labour charges for all tools and plants and scaffolding as required. 13 Sinking precast RC well ring made with cement concrete 1:2:4 with stone chips of 0.90 mm dia and 1.80m depth with RCC cover and making 1.25m X 1.25 m size Tube well platform with 1m spill water masonary surface drain with 100mm thick cement concrete(1:2:4) with 20mm graded stone chips over 150mm boulder soling including 125mmX75mm parapet wall with cement concrete(1:2:4) in all sides of the platform and drain also in base of tube well including 15mm thick(1:6) cement plaster with 1.5mm neat cement punning on all surfaces complete. 14 Collecting sample of water for bacteriological and chemical test from any depth at any time during execution of work including hire and labour charges for tools and plants and sterilising the equipments, paying all charges and fees, testing etc. complete in all respect as per direction. 15 Providing & fixing Concrete Sign Board as per IRC specification of size 900 x 750 x 37 mm. thick made with RCC 1:1½:3 with pakur variety stone chips reinforced with double layer IRC febric (75 x 75 mm. mesh) and fixed with necessary nuts & bolts on two RC precast posts 100 mm. x 150 mm. of height 2.65 m. of which top 750 mm. is of section 100 x 13 mm.and 1.90 metre above GL & 0.75 metre below GL including digging hole, repacking the same with cement concrete 1:3:6 with jhama khoa or with local stone chips etc. complete including painting two coats on both faces lettering sign marks etc. as per direction of the Engineer-in-Charge. (The rate is inclusive of cost of reinforcement, concrete, shuttering, nuts & bolts, washer etc. complete.) 16 GST @18% 17 Labour Cess @1%