Search all local Tender for Alloy. Download Alloy Tender Documents. Till date 204 Alloy tenders are published by various Tendering Authorities & Private companies. 204 live Tender Notices for Alloy are available in Alloy Tender section. Filter tenders to view Alloy Tenders in Maharashtra, Gujarat, Delhi etc.
supply of alloy steel plate to specn. sa387 gr.12 cl.2 and as per tdc 202 rev 09 for non ibr application., supply of alloy steel plate to the specification sa387gr12cl2
corrigendum - supply of alloy steel plate to specn. sa387 gr.12 cl.2 and as per tdc 202 rev 09 for non ibr application., supply of alloy steel plate to the specification sa387gr12cl2
supply of 270 mt of corrosion resistant low alloy steel sheet of thickness 3.15 mm to specn jisg 3125 astm588 gr a., suppliers wanted for corrosion resistant low alloy steel sheets to specn jisg 3125 / astm588 gr a.
supply of stores:-1 15/9540-000091 aluminium alloy special shaped sec 200 x 330 mm (specn no.ind/eng/prov/ 1231/ e & drg no.impd-1923/a) 2 15/9540-000090 aluminium alloy special shaped sec 200 x 1000 mm (plank) (specn no.ind/eng/ prov/ 1231/ e & drg no.impd-1927) 3 15/5680-000038 clamp and link assembly (specn no.ind/eng/prov/ 1231/ e & drg no.imsa-0313/c and connected drgs) 4 15/5306-007359 bolt machine m12 special tee head, 50 mm sq 45 mm long steel (specn no.ind/eng/ prov/ 1231/ e & drg no.impd-1928/c) 5 g1/5305-001906 screw metric slotted csk hd m8x20mm long (is:1365) 6 15/3540-000013 modified reel strapping coil 580 x 1000mm long (specn no.ind/eng/prov/ 1231/ e & drg no.im-0637/1/c, im-0638/1/c, impd-1928/a) 7 15/9540-000072 aluminum alloy special shaped section full plank end 203x3350mm (specn no.ind/eng/prov/ 1304/ e & drg no.impd-1118/b) 8 im-638-18 bolt hex head m12 (specn no.ind/eng/prov/ 1231/ e & item no.18 of drg no.im-0638/1/a) 9 15/5120-004746 tommy bar ms 50 nb x 2000mm (specn no.ind/eng/prov/ 1231/ e & item no.17 of drg no.impd-1928/c) 10 im-0638-17 trapezoidal nut (specn no.ind/eng/prov/ 1231/ e & item no.17 of drg no.im-0638/1/a) 11 im-0638-16 washer trough (specn no.ind/eng/prov/ 1231/ e & item no.16 of drg no.im-0638/1/a) 12 15/5310-001664 nut, plain wing steel zinc plated type m12 (is:2636) 13 15/5315-004155 pin, cotter, split, steel 25mm long 3.2mm dia (is:549) 14 15/5210-010241 nut plain sq m8x10mm long steel (drg no.impd-1925/a) 15 15/5310-008488 nut plain hex m8 nyloc self locking type ‘p’ (item no.7 of drg no.imsa-0184/b) 16 f1-5120-004234 crow bar round chisel and hammer ends 25mmx1525mm (is:704) 17 15/5320-000550 nut plain hex black steel m10 (is:1363) 18 15/3940-000403 sling (i) multiple legs having two chains with shackles (specn no.ind/eng/prov/ 1304/ e & drg no.impd-1029/a)
tender for electro - chemical analysisitem list :- (1) electro - chemical analysis apparatus required for speedy and accurate analysis of metal and alloys of non ferrous material. detail as per technical specification attached
disposal of m s scrap cast iron scrap cupronickel tube scrap deal wood scrap auto scrap s s scrap ni hard scrap rubber scrap aluminum scrap alloy scrap etc
supply of store for augmentation of water supply scheme:-87 gi nipple 50 mm with check nut for tank 88 gi nipple 40 mm with check nut for tank 89 gi nipple 32 mm with check nut for tank 90 gi nipple 25 mm with check nut for tank 91 nrv 65 mm make : bir/ bvi/leader isi marked 92 nrv 50 mm make : bir/ bvi/leader isi marked 93 nrv 40 mm make : bir/ bvi/leader isi marked 94 arv 50 mm make : bir/ bvi/leader isi marked 95 ci end plug 65 mm 96 nut bolt incl washer suitable for flange 80mm, 65mm, 50mm and 32mm 97 ci foot valve 65mm 98 ci foot valve 50mm 99 ci foot valve 40mm 100 stop cock cp 15mm 101 stop cock cast copper alloy 20 mm dia isi marked 102 stop cock cast copper alloy cp 25 mm dia isi marked 103 stop cock cast copper alloy cp 40 mm dia isi marked 104 stop cock cast copper alloy cp 50 mm dia isi marked 105 stop cock cast copper alloy cp 65 mm dia isi marked 106 stop cock cast copper alloy cp 80 mm dia isi marked 107 gi end plug 50mm 108 gi end plug 40mm 109 foot valve 40mm 110 teflon tape 111 anti adhesive paint 112 pipe wrench 18" ( rigid type) 113 pipe wrench 24" ( rigid type) 114 pipe cutter with two roller a d one cutting wheel ( rigid type) 1/2 to 4 inch 115 spare wheel for pipe cutter rigid type high speed steel,1/2 to 4 inch 116 spare wheel for pipe cutter rigid type ,1/2 to 4 inch 117 die set complete (1/2" to 4 inch) 118 pipe vice round piller type 100 mm 119 hexa frame fixed type pin with blade 120 hexa blade single cut painted 300 mm 121 measuring tape 3m 122 measuring tape 15m 123 rotary hammer drill machine 26 mm 124 drill bit set 19 pcs 125 pick axe 10" x 12" 126 shovel round with wooden handle and plastic grip 127 crowbar 6 feet long ,25 mm dia 128 hammer 129 adjustable wrench 12 inch 130 double ended open jaw spanner 12 pcs 131 chain pipe wrench jaw casted 14 inch 132 cutting plier 175 mm 133 bolt cutter 30 inch 134 steel wire cutter 10"
tender for indication boarditem list :- (1) indication board as per drg material alluminium alloy alphabate & number write to rerto brand-3m
tender for contact flat silver gold alloy item list :- (1) contact flat (silver gold alloy) to drg.no.wm30/86 for polarised relay.
tender for contact silver gold alloyitem list :- (1) contact [silver gold alloy] to drg. no. wm 202/83
tender for crow baritem list :- (1) crow bar made up of low carbon alloyed steel (weight approx. 7 to 7.5 kg. technical specification for crow bar: length 1552 mm (approx) length of crow:80 mm.
procurement of aluminum alloy pipes, sheets and plates.
tender for provision of ration store and clothing store at patri gali and sabri gali including addn/ alt to building no.p-11 and barbed wire fencing at 37 rr bn under the aor of age b/r-i of ge 881 ews. :-13.21 s &f aluminium alloy, anodised, sliding door bolt 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or castaluminium alloy and fixed 13.22 s&f stainless steel butt hinges medium wt of size 100 mm cold rolled isi marked.. 13.23 s&f aluminium, anodised, handles 150 mm of extruded section and fixed 13.24 s & f cp towel rail 20mm dia, 60 cm long d typefixed with wooden gutty and steel screws . 13.25 s & f gi wire cloth 0.56mm nominal dia of wire and 1.18 mm average width of aperture complete with beads etc. for door shutter/window shutter of any size/ type/thickness. 13.26 s&f for butt hinges 100 mm long, heavy weight, cold rolled mild steel, and fixed complete all as specified. 13.27 extra for forming fair finished drain or drain channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitred stopped ends etc complete all as spd. 13.28 m&l cement concrete 1:3:6 type c-1, using 20 mm graded crushed stone aggregates as in surface channel and drains, complete all as spd. 13.29 50 mm thick pcc 1:3:6 type c2 using 20 mm graded crushed stone aggregate as in plinth protection fair finished. 13.30 cement concrete type d-2 ,75mm thick,1:4:8 in subbase to floor (40mm aggregate). 13.31 25 mm thick pcc 1:2:4 type b1 (using 20 mm graded stone aggregate) in floorings . 13.32 100 mm thick pcc 1:2:4 type b1 (using 20 mm graded stone aggregate) in path . 13.33 glazed ceramic coloured tiles 13.34 "material & labour for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectagular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floor etc.
tender for provision of ration store and clothing store at patri gali and sabri gali including addn/ alt to building no.p-11 and barbed wire fencing at 37 rr bn under the aor of age b/r-i of ge 881 ews. :-13.34 "material & labour for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectagular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floor etc, set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including cement screed bed 15 mm thick in cement mortar 1:4 base complete all as specified. " 13.35 sheet glass pane ordinary quality & glazing with oil putty 4.00mm thick not exceeding 0.50 sqm in each pane fixed to wooden door /window or steel/aluminium doors, windows complete all as specified. 13.36 "gi tubing medium grade 15mm dia with all fittings, cutting, threading and fixing to walls,ceiling or in floors make : tata/jindal. " 13.37 "gi tubing medium grade 20mm dia with all fittings, cutting, threading and fixing to walls,ceiling or in floors. " 13.38 "gi tubing medium grade 50mm dia with all fittings, cutting, threading and fixing to walls,ceiling or in floors. " 13.39 pillar tap cast copper alloy with capstan head, fancy type, chromium plated screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe & fixed, complete 15 mm dia suitable for whb. 13.40 bib tap cp fancy type screwed down, screwed for iron pipe fixed to gi sockets complete 15 mm dia all as directed 13.41 s & f stop cock cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed down both ends for iron pipes or for unions and fixed 15 mm dia with butter fly handle. 13.42 concealed stop valve (isi marked), brass cp (fancy type long shank) screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore and fixed complete all as specified.
tender for proposed construction of c.c. gutter from nh. 8 sagar hotel to miragoan cast alloy company ward no 15 in mbmc area
for echs and serving patients, procurement of expendable interventional cardiology dept of cardiology - 1.01 steerable guide wire 0.018" 1.02 terumo angiography guide wire 0.032x150cm 1.03 terumo angiography guide wire 0.032x260cm 1.04 peripheral angioplasty balloon - assorted sizes 1.05 rapidexchangecutting balloon ( microsurgical dilatation device ) - assorted sizes 1.06 peripheral cutting balloon ( microsurgical dilatation device ) - assorted sizes 1.07 cobalt alloy balloon mounted coronary stent system - assorted sizes 1.08 covered stents ( various sizes ) 1.09 biodegradable 3- layer polymer coated cobalt chromium everolimus drugs eluting stent with open cell design- assorted sizes ( dcgi approved ) 1.1 drug eluting balloon mounted coronary stent system ( sirolimus analogue coated ) - assorted sizes 1.11 drug eluting balloon mounted coronary stent system ( evorolinus eluting stent ) everolimus 1.12 drug eluting balloon mounted coronary stent system ( zotaralimune eluting stent ) zotarolimus 1.13 drug eluting balloon mounted coronary stent system ( paclitaxel eluting stent ) 1.14 drug eluting balloon mounted coronary stent system ( sivorilimus eluting stent ) siirolimus 1.15 drug eluting balloon mounted coronary stent system ( sirolimus coated ) - assorted sizes 1.16 peripheral balloon expandable stent system- assorted sizes 1.17 ptfe covered balloon mounted coronary stent system - assorted sizes 1.18 ptfe covered self expanding nitinol stent graft system - assorted sizes 1.19 self expanding nitinol stents for carotid angioplasty - assorted sizes 1.2 self expanding nitinol stents for peripheral angioplasty - assorted sizes 1.21 stainless steel balloon mounted coronary stent system -assorted sizes 1.22 angioplasty kit ( insertion tool, y adaptor and torque device ) 1.23 goose neck microsnare kit 1.24 high pressure 3 port manifold 1.25 inflation device ( indeflator ) kit for angioplasty 1.26 polycarbonate luer lock syringe - 12cc
supply of suture and pledgets items:-28 suture non absorbable braided silk 3/8 circle micro point spatulated 29 suture non absorbable monofilament eptfe 1/2 circle 30 suture non absorbable monofilament eptfe 3/8 circle 31 suture non absorbable monofilament polypropylene 3/8 circle taper multipass double needle 32 suture non absorbable polypropylene blu usp dble arm bv 175-8 tungsten rhenium alloy needle 3/8 circle round body 33 suture non absorbable polypropylene blu usp dble arm cc-175-8 tungsten rhenium alloy needle 3/8 circle round body 34 suture non absorbable polyster braided coated 1/2 circle taper trocar point ptfe pledget 3x3x1.5mm 35 suture pledgets (square) 6mmx6mm 36 suture pledget 4.8 x 6mm
supply of petty tools & equipments for giti chhachhrauli :- 203 dowel pin ( straight ) 204 standard tap screws 205 lapping plate 206 medium carbon heat treated alloy steel metric studs and bolts along with nuts ( for display ) of standard length ( may be manufactured in-house ) 207 caps screws 208 drill gauges 209 cast iron globe valve ( flanged type ) 210 c.i. sluice / gate valve ( flanged type ) 211 stop cock 212 m.s. pipe 213 g.i. pipe 214 slip-on forged steel flange 215 pipe threading die with handle 216 hollow punch 217 lifting sling 218 bearing extractor 219 pulley extractor 220 trammel 221 pocker. 222 prick punch 223 mallet. 224 aviation snips straight cut 225 flat headed hammers with handle. 226 planishing hammer. 227 snip bent left cut 228 stake hatchet with leg. 229 stake grooving. 230 slip gauge as johnson metric set. 231 gauge snap go and not go 232 gauge plug 233 gauge telescopic set. 234 dial test indicator on stand 235 sine bar 236 dial vernier caliper. ( universal type ) 237 screw thread micrometer with interchangeable. pitch anvils for checking metric threads 60. 238 depth micrometer. 0-25 mm 239 vernier caliper. 240 digital micrometer outside. 241 comparators gauge - dial indication with stand and bracket. 242 engineer''s try square ( knife-edge ) 243 surface roughness comparison plates 244 digital vernier caliper 245 vernier bevel protector 246 carbide wear block. 247 arm strong type tool bit holder. 248 arm strong type tool bit holder. 249 arm strong type tool bit holder. 250 stillson wrenches 251 pipe cutter wheel type. 252 pipe bender machine spool type with stand manually operated.
supply of petty tools & equipments for giti chhachhrauli :- 341 electric automatic steam press 342 sewing machine – single needle lock stitch industrial model 343 over lock machine 3 thread 344 zig zag multi purpose machine 345 double needle machine 346 button hole machine 347 button sewing machine 348 bar tack machine 349 feed off the arm double needle 350 machine attachments 351 chairs with low back rest or stools for the machines 352 drafting table 353 display board covered with glass or acrylic sheet 120 x 90 cm 354 instructor table 355 instructor chair 356 steel almirah 195 x 90 x 60 cm 357 pigeon hole almirah 10 lockers & separate locking arrangements for trainees 358 locks for above pigeon hole 359 wall clock 360 calculator desk type 361 white board with accessories ( size as per requirement ) 362 dummy lady , men , kid ( different size ) 363 revolving chairs without arms 364 faculty table & chair set 365 computer set with ups & multimedia projector 366 storage almirah 367 book shelf368 a / c unit split type 2 tr capacity with stabilizer 369 measuring steel tape 370 combination plier insulated 371 screw driver insulated 372 screw driver insulated 373 electrician screw driver thin stem insulated handle 374 heavy duty screw driver insulated 375 electrician screw driver thin stem insulated handle 376 punch centre 377 knife double bladed electrician 378 neon tester 379 steel rule graduated both in metric and english unit 380 hammer, cross peen with handle 381 hammer, ball peen with handle 382 pincer 383 c- clamp 384 spanner adjustable drop forged, ss 385 blow lamp brass 386 chisel cold 387 chisel firmer with wooden handle 388 allen key alloy steel 389 grease gun 390 bradawl 391 pully puller with 3 legs 392 bearing puller ( inside and outside ) 393 pipe vice cast iron with hardened jaw open type 394 scissors blade, ss 395 scissors blade, ss
tender for different of two items of (1).polyster web sling and (2). heavy duty d.item list :- (1) polyster web sling, make:-samson or puma or krafts, specification as following- (1). polyster web sling 2 ton, length 03 meter, qty.-02no. (2). polyster web sling 5 ton, length 03 meter, qty.- 02no. (3). polyster web sling 3 ton, length 03 meter, qty.-02no. sse/mech/maintenance/ bihar 1.00 set (2) heavy duty d-shackle, specification as following:- [1].heavy duty d-shackle alloy steel grade-80, capacity-5 ton, 10no. [2].heavy duty d-shackle alloy steel grade-80, capacity-6.5 ton, 10no. [3].heavy duty d-shackle alloy steel grade-80, capacity-8.5 ton, 10no.. sse/mech/maintenance/ bihar 1.00 set
supply of material at 132 kv sub station gajraulla under etd amroha 1 bolted type single tension fitting for twin moose conductor with turn buckle for 33 kv main bus suitable for each disc string for 70 kn disc insulator with hardware fitting d shackle, d socket, yoke plate, tension clamp etc as per technical specification duly type tested. 2 suspension fitting for twin moose conductor with turn buckle for 33 kv main bus suitable for 70 kn disc insulator with 02 nos. suspension clamps made of aluminium alloy lm-6 & yoke plate, ball hook, d socket etc made from forged steel as per technical specification duly type tested. 3 33 kv circuit breaker clamp made of aluminum alloy lm-6 one side connecting plate of size 100x100x15 mm another side connecting twin panther conductor & complete with hot dip galvanized nut, bolt & washer as per technical specification confirming duly type tested. 4 33 kv isolator clamp made of aluminiun alloy lm-6 one side connecting plate of size 80x80x15 mm another side connecting twin panther conductor complete with hot dip galvanized nut, bolt & washer as per technical specification duly type tested. 5 33 kv bi-metalic ct clamp made of aluminium alloy lm-6 one side connecting the ct rod, another side connecting twin panther conductor complete with hot dip galvanished nut bolt & washer as per technical specification duly type tested. 6 04 bolted type p.g. clamp made of aluminium alloy lm-6 suitable for moose to panther conductor complete with hot dip galvanized nut, bolt, spring & plain washer as per technical specification duly type tested 7 03 bolted type p.g. clamp made of aluminium alloy lm-6 suitable for panther to panther conductor complete with hot dip galvanized nut, bolt, spring & plain washer as per technical specification duly type tested..
supply of material at 132 kv sub station gajraulla under etd amroha 8 04 bolted type p.g. clamp made of aluminium alloy lm-6 suitable for moose to moose conductor complete with hot dip galvanized nut, bolt, spring & plain washer as per technical specification duly type tested. 9 spacer for moose conductor 02 bolts, 250mm spacing complete with hot dip galvanized nut bolt , spring & plain washer as per technical specification duly type tested. 10 spacer for panther conductor 02 bolts, 100 mm spacing complete with hot dip galvanized nut, bolt, spring & plain washer as per technical specification duly type tested. 11 33 kv la clamp made of aluminiun alloy lm-6 one side connecting plate of size 80x80x15 mm another side connecting twin moose conductor & complete with hot dip galvanized nut, bolt & washer as per technical specification duly type tested. 12 spacer for moose conductor 02 bolts, 100 mm spacing complete with hot dip galvanized nut, bolt, spring & plain washer as per technical specification duly type tested. 13 33 kv bi-mettalic circuit breaker clamp made of aluminum alloy lm-6 one side connecting plate of size 100x100x15 mm another side connecting twin moose conductor & complete with hot dip galvanized nut, bolt & washer as per technical specification duly type tested. 14 33 kv bi-metallic isolator clamp made of aluminiun alloy lm-6 one side connecting plate of size 80x80x15 mm another side connecting twin moose conductor & complete with hot dip galvanized nut, bolt & washer as per technical specification duly type tested.
supply of material at 132 kv sub station gajraulla under etd amroha 15 33 kv bi-metalic ct clamp made of aluminium alloy lm-6 one side connecting the ct rod, another side connecting twin moose conductor & complete with hot dip galvanished nut bolt & washer as per technical specification duly type tested. 16 bi-metalic terminal connector for 63 mva t / f lv side bushing terminal plate made of aluminium alloy lm-6 one side connecting plate of size 100x100x20 mm & other side suitable for twin moose conductor complete with hot dip galvanized nut bolt & washer as per technical specification duly type tested. 17 bi – metallic terminal connector for 40 mva t / f lv side bushing terminal plate made of aluminum alloy lm-6 one side connecting rod of size 30 mm dia and other side suitable for twin moose conductor complete with hot dip galvanized nut bolt & washer as per technical specification duly type tested. 18 33 kv post insulator clamp made of aluminium alloy lm-6 for supporting twin moose conductor & complete with hot dip galvanized nut, bolt & washer as per technical specification duly type tested.
tender for supply of cat b / expendable stores:-1.01 racker iron 12 prong 1.02 hacksaw blade 12"x1" ( both side ) make miaranda / ambica 1.03 hss tool 3 / 4"x 6'' 1.04 hss tool 1 / 2"x 6" 1.05 hss tool 5 / 8" x 6" carbide tipped tool lh 12x12x100 mm make miaranda / sandvik 1.06 12x12x100 mm make miaranda / sandvik 1.07 carbide tipped tool rh 12x12x100 mm make miaranda / sandvik 1.08 carbide tipped tool rh 16x16x150 mm make miaranda / sandvik 1.09 carbide tipped tool lh 16x16x150 mm make miaranda / sandvik 1.1 carbide tipped tool rh 20x20x150 mm make miaranda / sandvik 1.11 carbide tipped tool lh 20x20x150 mm make miaranda / sandvik 1.12 carbide tipped tool ''v'' 16x16x100 mm make miaranda / sandvik 1.13 carbide tipped tool ''v'' 20x20x150 mm make miaranda / sandvik 1.14 carbide tipped tool 12x12x150 mmm make miaranda / sandvik 1.15 grinding disc 6"x 22 mmx 6 mm ( green ) make grind well 1.16 grinding disc cutter 4"x16 mmx1.5mm make grind well 1.17 grinding wheel green ( tip tool grinding ) make grind well 1.18 grinding wheel dresser ( dimond ) make grind well 1.19 revolving center for lath machine mt3-mt4 ( heavy duty ) make ambica / jtc / bassco 1.2 revolving center for lath machine mt2-mt3 ( light duty ) make ambica / jtc / bassco 1.21 fire ply joining sheet 6''x3''x1 / 32" 1.22 fire ply joining sheet 3 mm 1.23 fire ply joining sheet 4 mm 1.24 adbestor sheet for packing 1.25 thread tape ( taflon type ) size 12mmx0.075mmx10mtr 1.26 hose clamp 1 / 2" 1.27 hose clamp 1" 1.28 hose clamp 1 1 / 2" 1.29 hose clamp 2" 1.3 hose clamp 3" 1.31 hose clamp 4" 1.32 plastic pipe 1 / 2" dia 1.33 m seal 100 gms 1.34 ms welding electrode hard facing citemngam size 4mmx450mm make esab / advaniterro weld ( for rebuilding of jaw plates ) code zed alloy 550 1.35 tap & die set 6 mm to 24 mm make totam / stom 1.36 tap & die set unf 1 / 4" to 1" make totam / stom 1.37 tap & die set bsp 1 / 4" to 1" make totam / stom 1.38 drill bit 4.5 mm ( straight shank ) , jk / miranda / addison / it
tender for provision of general equipment store at naval radar detachment and provision of partition in ops room at neil det at neil island under ge ( p ) central:-material and labour for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed. , material and labour for pre-painted galvalume aluminium zinc coating gi based corrugated steel sheet 0.50mm of any colour, material and labour for anodised (minimum 15 micron thick anodising) aluminium door shutters, aluminium section weighing 0.55 kg/m incl necessary joining cleats, glazing clips, rubber neoprene packing handles 2 nos in each door, hinges, anodised aluminium snap beading screws etc, complete all as specified. , supply and fixing solid pvc door frame , supply and fixing factory made solid panel pvc door shutter 30mm thick (style) , supply and fixing butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed type b-21 100mm size , supply and fixing 150 mm long extruded aluminium alloy handles, fabricated type, anodised. , supply and fixing aluminium anodised barrel tower bolts of extruded section and fixed of size 150 mm , material and labour for 12mm thick prelaminated particle board both side with decorative laminated for doors, both sides decorative choice laminated cut to size and fix in door panel as directed. , material and labour for 3.0 mm thick sheet glass, ordinary quality in squares not exceeding 0.5 sqm in each pane and glazing with pvc rubber gasket suitable for aluminium framing complete all as directed , material and labour for aluminium alloy wire mesh 0.45 nominal dia of wire and average width of aperture 1.40mm fixed with aluminium wire staples complete all as directed. ,
tender for provision of general equipment store at naval radar detachment and provision of partition in ops room at neil det at neil island under ge ( p ) central:-supply and fixing bib taps cast copper alloy, chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule fixed to 15 mm bore dia pipes complete all as specified and directed , supply and fixing pillar taps, chromium plated fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'hot' or 'cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed to 15 mm bore dia pipes complete all as specified and directed , supply and fixing stop valve cast copper alloy, fancy type, secrewed down , high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions , chromium plated and fixed fixed to 15 mm bore dia pipes complete all as specified and directed , supply and fixing ball brass valves, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed fixed to 15 mm bore dia pipes complete all as specified and directed , supply and fixing 32 mm dia waste fittings, brass chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly-nuts, flange end, bedded in red lead cement and other end fixed complete all as specified and directed , supply and fixing grating doom 100 mm dia of ptmt (min weight 25 gms) complete all as specified and directed , material and labour for towel rail 600 mm long, ptmt fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 190 grams) complete all as specified and directed , material and labour for pvc connections 15 mm size with ptmt nuts of length 600 mm complete all as specified and directed ,
supply, fabrication and replacement of protection cover of rope drum hoist of surge tank gates and hoist of radial gates of tattihalla dam.- 1. dismantaling of old corrodded protection cover and chequered plates of hoist mechanism of surge tank gates and tattihalla radial gates including scaffolding. 2. supply of ms sheets of 3 mm thick , ms chequered plates of 6mm thick, ms pipes of 152.4 mm and 6 mm thick class "h" pipe. and 65 mm and 3.2mm of class "l" pipe. 3. supply of angles 65x65x6mm and 50x50x6mm. 4. fabrication of new cover from ms sheets, angles and chequered plates including welding, drilling, cutting of sheet straightning etc 5. providing and installing pre painted galvalume sheet. sheet shall be 0.47 mm + / - 0.02 tolerance mm zinc-alu alloy coating az 150 gsm as per astm 1397 / 755 - 550 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 20-22 microns using self drilling / self tapping screws of 25 mm length. ( width upto 500-600 mm only ) 6. providing coal tar two coat epoxy paint including painting. 7. supply of 20 kg ss 16mm dia 40 mm length bolt and nut for fastening. 8. shifting of removed sheets from site to ambikanagar store.
tender for femur hi flex ( 90213100 ).item list :- (1) 1) femur hi flex ( 90213100 ). 2) articulating insert ( 90213100). 3) tibial cobalt chromium alloy ( 90213100). 4) bone cement. ( qty. sr. no. 1 to 4 = one set ). note:- firm* firms to provide gst no. and hsn code in their offer. medical director j r maharashtra 6.00 set
tender for local purchase of expendable medical stores- 61 bleaching kit ( syringe type ) 62 outfit matrix retainer ss band pkt of 12 ( siquvland ) 63 inter dental brush ( ns ) pkt of 5 64 denture cleansing tablet bott of 100 65 stainless steel wire 19 gauge 66 mouth mirror top 67 latex gloves disposable size 6 ½ pkt of 25 pair 68 latex gloves disposable size 7 ½ pkt of 25 pair 69 examination gloves pkt of 100 70 disposable syringe 5ml pkt of 100 71 disposable syringe 2ml pkt of 100 72 disposable face mask elastic type pkt of 50 73 suction tips pkt of 100 74 developer for x-ray bottle of 250ml 75 fixer for x-ray bottle of 250 ml 76 dental x-ray film iopa pkt of 100 77 antiseptic pain relieving gel 78 dologel mouth paint 79 triamcinolone acetonide mouth paint 80 mucopain gel 81 betadine mouth wash 82 chlorhexidine mouthwash bottle of 100ml 83 antiseptic hand wash 84 sterillium 85 sodium hypochlorite 2% 86 hydrogen peroxide 87 povidine-iodine bottle of 100ml 88 sensor sheaths for rvg 89 doctor’s spirit bottle of 500 ml 90 sterilization sealing pouch 9cmx26cm pkt of 50 91 desensitize tooth paste 92 dental floss 93 glass slab 94 glass bead 95 vaseline 96 facial paper tissue pkt of 100 97 disposable glass 98 cotton roll for dental use 99 non absorbable surgical suture 3 / 0 76cm & needle 26mm 3 / 8 circle reverse cutting pkt of 12 100 bone graft 101 gtr membrane 102 mercury for dental use bott of 225gm 103 silver alloy fine grain 104 impression paste pkt of 2 tubes 105 base plate u / l 106 gel foam ( oxidized methyl cellulose ) 107 ointment zytee / orasore 108 bp blade no. 11 109 bp blade no. 12 110 bp blade no. 15 111 hemostat syringe of 2ml 112 tab ketorol 10mg 113 tab zordol 114 tab metronidazole 400mg
request for proposal for supply of dental material:-1.01 calcim hydroxide containing two tubes base and catlyst self cure 1.02 chlorhexidine gluconate 0.5% oral gel 1.03 bur surgical shp for oral surgery various size 1.04 crown cutting & finishing bur various size 1.05 dental floss 1.06 gic fuji type- ii for synthetic restoration bottle of 15g pdrwith liquid 1.07 gic tupe -i pkt of 10g 1.08 elastomeric impression material putty of 1kg & light body pkt of 2 cartridges 1.09 z250 xt assorated shades nano hybrid universial restorative 1.1 irm ( intermediate restorative material ) 1.11 light cure gic pkt of 2 syr 1.12 miracle mix restorative material ( silver reinforced glass ionomer ) 1.13 dual cure resin cement 11gm catalyst / base paste ( u-200 ) 1.14 silver alloy 1.15 single bond bonding agent 1.16 ultarsonic scaler tips ( ems ) 1.17 x ray film iopa pkt of 150 film 1.18 012” niti wire upper / lower pkt of 10 1.19 014” niti wire upper / lower pkt of 10 1.2 016” niti wire upper / lower pkt of 10 1.21 16 x 22 niti wire upper / lower pkt of 10 1.22 16 x 22 ss wire upper / lower pkt of 10 1.23 ss wire .016 upper / lower 1.24 calcium hydroxide +idoform root canal paste pkt of two syringe 1.25 gutta percha f1, f2, f3 1.26 gutta percha points 4% 1.27 gutta percha points 6% 1.28 hand niti manual operated assorted 21mm / 25mm pkt of 06 1.29 k- file 15-40 ( 21mm / 25mm ) set of 6 1.3 k files 21mm / 25 mm size - 06 pkt of 06 1.31 k files 21mm / 25 mm size - 08 pkt of 06 1.32 k files pack of 21mm, 25mm 6 size-10 1.33 flexible rotary files 21mm / 25mm set of 6 1.34 protaper paper points f1, f2, f3 1.35 rotary file niti 21mm / 25mm pkt of 6 1.36 niti rotary retreatment file pkt of 06 1.37 osteoplant cancellous bone sheet 1.38 edta syr of 2ml 1.39 face mask disposable pkt of 50 1.4 bio plast 1.5mm, 2mm pkt of 10 circular for biostar machine 1.41 nova bone putty 0.5ml pkt of 2 syringes 1.42 titanium bone screw 2.0mm x 06mm pkt of 05
procurement of 05 types of ycl items:-1 n9515-000438 steel sheets mild black 2500x1200x2mm 2 n9515-000435 steel sheet mild black tt 2500x1200x1.60m 3 n9515-000489 sheet steel mild gal 2500x900x0- 80mm 4 n9515-000433 steel sheet carbon hot rolled galvanised 3600mmx900mm 5 n9535-000420 aluminium alloy sheet 2400x1200x1.60mm
tender for supply of material at different sub station under etc, muzaffarnagar :- 1. bolted type single tension fitting for single panther conductor with turn buckle for 33 kv suitable for each disc stringing 1x3 nos. 70 kn disc insulator with hardwar fitting d-shcakle, ball hook, yoke plate, d-clip it tension clamp etc as per techncial specification. ( in nos. ) 54 2 bolted type single tension fitting for single panther conductor without turn buckle for 33 kv suitable for each disc stringing 1x3 nos. 70 kn disc insulator with hardwar fitting d-shcakle, ball hook, yoke plate, d-clip it tension clamp etc as per techncial specification. ( in nos. ) 57 3 bimetallic 33 kv bus post clamp made of aluminum alloy lm-6 suitable for single panther conductor complete with hot dip galvanized nut and bolt and washer as per techncial specification. ( in nos. ) 39 4 4 bolted type pg clamp made of aluminum alloy lm-6 suitable for tarantulla to panther conductor complete with hot dip galvanized nut bolt and washer as per techncial specification. ( in nos. ) 312 5 3 bolted type pg clamp made of aluminum alloy lm-6 suitable for panther to panther conductor complete with hot dip galvanized nut bolt and washer as per techncial specification. ( in nos. ) 156 6 cable perforated tray made of gi sheet 75 mm. ( in rmt ) 325 7 copper bond of size 10 mm dia & 450 mm longh complete with both side lugs as per techncial specification.
procurement of hardware items:-1.01 screw brass for wood csk hd 3 / 8"x6g 1.02 screw brass csk hd 1 1 / 4x 1.03 self tapping screw plain hd 3 / 4" x 8 g 1.04 self tapping screw 3 / 4x10g 1.05 shackle bow to screw for rigging 10mm wth 52.4 inside114.4 1.06 shackles rigging bow to screw ms 13 mm 1.07 screw wood slotted csk hd ms brass no 5 x 12mm long 1.08 screw wood counter sonk head slot drive material brass 1.09 screw wood counter sunk, slot drive brass gauge-8 length 20mm 1.1 screw brass 1", 10g csk head for wood 1.11 screw wood slotted csk hd brass10x65mmlong 1.12 screw wood slotted csk hd brass no 12 65mm long 1.13 button head gi self tapping screw 1 / 2" x 08g 1.14 button head gi self tapping screw 3 / 4"x08g 1.15 button head gi self tapping screw 1"x08g 1.16 self tapping screw 1 / 2"x7g 1.17 pin panel steel 1.60mmx25mm 1.18 chilled iron grit fine grade g-c60 1.19 flexible flux coated special brass brazing alloy rod 3.15mm 1.2 cupronickel filler rod 4mm x 100mm length 1.21 rod 1601, 3.2mm silver 1.22 hacksaw blade 3 / 4" x 12" ( 200mm width 1.8mm pitch 0.8mm th. ) 1.23 cup wire brush 70 mm hss 1.24 reinforced cutting wheel 350 mm odx25 mm id x 3 mm thick 1.25 abrasive wheel for grinding, 100 mm odx16 mm idx4 mm thk 1.26 abrasive wheel for cutting, 100 mm odx16 mm idx3.2 mm thk 1.27 gland packing hollow core size 45mm 1.28 hinge steel butt 75 mm 1.29 hinge brass butt 100mm 1.30 hinge steel 50mm 1.31 hinge steel butt 100 mm 1.32 hinge steel 60mm 1.33 oil cutting zx-1 ( used as water emulsion )
tender for rail dolly item list :- (1) rail dolly with chain hook assembly for carrying rails/concrete sleepers with the following technical specification. 1) tubular frame : made of mild steel heavy duty pipe of nominal bore 40mm & 25mm as per required tolerance. 2) chain hook assembly attachment : chain made of alloy steel, hook bolt made of high carbon steel & rail clamp made from md flat or ms plate. 3) gusset plate : made from 4mm thick ms plate. 4) wheel assembly : assembly made of two double flanged wheels with cast steel duly insulated the hubs to accommodate the shaft and bearing.
supply of rowing boat spare parts:-1 bow ball ( epdm rubber ) 2 seat wheel ( nylon wheel with inox ball bearing ) 3 rudder with assembly set 4 seat frp scull 5 frp seat sweep ( coxless pair 10+coxless four 10 ) 6 oar lock with ss pin nult bolt washer sculls 7 oar lock with ss pin nult bolt washer sweep 8 steering cable ( rudder ) with out nylon coated 9 nylon washers for overlock pin 10 aluminium alloy track for sweep & scull 11 sleeves for scull & sweep 12 concept 2 handle scull grip 13 concept 2 handle sweep grip 14 oars lock gate nut scull 15 oars lock gate nut sweep 16 wing nut with washers ss 17 cut washer for oar lock pin 18 shoes ( sizes 7, 8, 9, 10 ) 19 foot stretcher teeth 20 foot stretcher lower clamp ( ''l'' patti ) 21 shoes screw ss 22 boat display stand 23 rowing pitch gauge, digital 24 level rod ( empacher ) 25 rigger scull & sweep single scull double scull coxless pair coxless four coxed four coxed eight 26 rowing tools with box ( spanner ) 27 concepts 2 oars sweep buttons 28 concepts 2 oars scull buttons 29 megaphone with rechargeable battery ( neilson, kellerman )
supply of tools equipment - steel tape, 15 m length, plier insulated, 200 mm, plier side cutting, 150 mm, screw driver, 100 mm, screw driver, 150 mm, electrician connector, screw driver insulated handle thin stem, 100 mm, heavy duty screw driver , 200 mm, electrician screw driver thin stem insulated handle, 250 mm, punch centre , 150 mm x 9 mm, knife double bladed electrician, neon tester, steel rule 300 mm, hammer, cross with handle, hammer, ball peen with handle 500, electrician helmet, hand gloves, gum boot, safety belt, pincer 150 mm, allen key alloy steel set of 9, bradawl, grease gun make any repuated / isi / iso certified co, pipe vice 100mm, c- clamp 200 mm, 150 mm and 100 mm, spanner adjustable 150 mm, 300mm make any repuated / isi / iso certified co, blow lamp 0.5 ltr made of brass metal make any repuated / isi / iso certified co, hand vice 50 mm jaw make any repuated / isi / iso certified co, table vice 100 mm jaw, scissors blade ss 200 mm, scissors blade ss 150 mm, crimping tools 1.5 sq to 16 mm, crimping tools 16 sq to 95 mm, wire cutter 150 mm, out side micrometer 0 to 25 mm, thermometer digital o to 150 c., series test lamp 230v 60w, mallet hard wood 0.50kg, hammer extractor type 0.40 kg, hacksaw frame adjestable 300 mm, try square 150 mm, pliers flat nose 200mm, pliers round nose 100 mm, tweezers 150mm, snip sraight and bent 250 mm, d.e metric spanner double ended 6-32, drill hand brace 0-100mm, drill ss twist block 2, 5, and 6mm set of 3, plane cutter 50 x 200 mm, smoothing cutter 50 x 200 mm, gauge wire imperial sheet, file flat 200 mm 2nd cut, file half round 200mm 2nd cut, filr round 200 mm 2nd cut, file flat rough 150mm, file flate bastared 250 mm, file flat smooth 250 mm, file rasp half round 200 mm, copper bit soldering iron 0.25 kg, de soldering gun, ohm meter series type shunt type portable box type 50 / 2000, digital multi meter, a.c voltmeter mi 75v 150 v 300v 600v, milli voltmeter center zero 100-0-100,
supply of petty tool and equipment :- 188 file half round second cut. 250 mm 189 file half round bastard. 250 mm 190 file round bastard. 250 mm 191 file hand second cut. 150 mm 192 hand reamer set ( taper pin straight flute ) nominal dia 6, 8, 10, 12, 16mm 193 machine reamer parallel ( helical flute ) 12 - 16mm set of 5. 194 pipe vice 100 mm 195 adjustable pipe die set bsp cover pipe size 1" or 3 / 4" 196 wheel dresser ( one for 4 units ) star / dresser with holder length 150 mm, diamond point 197 machine vice - swivel base 100 mm 198 machine vice - swivel base 125 mm 199 vice bench 150 mm 200 fire extinguisher ( for 4 units ) co2 type, 3 kg capacity 201 power tools for fastening capacity 10-18mm 202 different profile gauges ( plate type ) - for demonstration metric standard 203 knurling tool ( diamond, straight & diagonal ) 204 index able boring bar with inserts 1" shank 205 machine maintenance manual for lathe, pedestal grinder, drill machine, power saw 206 temperature gauge range 0 - 150°c 207 dowel pin ( straight ) dia. -1" length -4" ( mat: stainless steel ) 208 standard tap screws m3, m4, m5, m6, m8, m10, m12, m14, m16 209 lapping plate dia. -6" 210 medium carbon heat treated alloy steel metric studs and bolts along with nuts ( for display ) of standard length ( may be manufactured in-house ) m6, m8, m10, m12, m14, m16 ( standard ) 211 caps screws m6, m8, m10, m12 212 drill gauges letter drill gauge ( a to z ) , number drill gauge ( 1 to 60 ) , metric drill gauge ( 1.5mm ) 213 cast iron globe valve ( flanged type ) 150nb, class# 150 flange:ansi125-b16.1
procurement of electrodes.-1 low hydrogen welding electrode 7018 or equivalent size 4mmx450 for welding work in hemm 2 welding electrode lomelt-210 / weld alloy 980 cp or equivalent, size 4 mmx350 for welding work in hemm 3 welding electrode lomelt-210 / weld alloy 980 cp or equivalent, size 3.15 mmx350 for welding work in hemm 4 welding electrode lomelt-210 / weld alloy 980 cp or equivalent, size 2.5 mmx350 for welding work in hemm 5 electrode weld alloy 886s / prima 18 / 8 / mn26 or equivalent size 4 mmx350 for welding work in hemm.
supply of material for 220 kv sub-station chhata under etc mathura 1 33kv botted type single tension fitting for twin zebra conductor of 250 mm spacing with turn buckle, d-shackle, d-socket, yoke plate tension clamp 02 nos. confirming to bis:2485 part-i 2 33kv botted type single tension fitting for twin zebra conductor of 250 mm spacing with turn buckle, d-shackle, d-socket, yoke plate tension clamp 02 nos. confirming to bis:2486 part-i 3 33kv isolator clamp suitable for twin panther conductor as per sample confirming to bis:5561 4 33kv isolator clamp suitable for twin zebra conductor as per sample confirming to bis:5561 5 pg clamp 04 bolted type made of alluminum alloy lm-6 suitable for acsr zebra to panther complete with hot dip galvanized nuts, bolts, spring & plain washer confirming to bis:5561 6 pg clamp 04 bolted type made of alluminum alloy lm-6 suitable for acsr zebra to zebra complete with hot dip galvanized nuts, bolts, spring & plain washer confirming to bis:5561 7 pg clamp 03 bolted type made of alluminum alloy lm-6 suitable for acsr panther to panther complete with hot dip galvanized nuts, bolts, spring & plain washer confirming to bis:5561 8 spacer made of alluminum alloy for twin zebra conductor with 250mm spacing confirming to bis:5561 9 spacer made of alluminum alloy for twin panther conductor with 100mm spacing confirming to bis:5561
corrigendum - quotation for local purchase of store;-24 led street light fitting driver for ip-65 street light fitting suitable for 48-70 watt, single phase, viltage ac 85-265 volts make:havells / bajaj / cg / surya roshini 25 led fitting driver 18-22 watt, single phase, voltage ac 85-265 volts. make:havells / bajaj / philips 26 lt line separator. as per sample 27 pvc armoured cable 3.5x120sqmm make:havells / finolex / rr cable / polycab 28 lugs copper alloy 400 sqmm make:dowells or equivalent 29 pvc armoured cable 3.5x50 sqmm make:havells / finolex / rr cable / polycab 30 copper lugs 70 sqmm make:dowells or equivalant 31 ms clamp for street light fittings. as per sample 32 ht fuse element suitable for 11000 volts 20 amps capacity make :rmco or equivalent 33 ht fuse element suitable for 11000 volts 10 amps capacity make:rmco or equivalent
procurement of tension fitting, pg clamps, copper bond, perforated tray at 132 kv sub station jawaharpuram, under 220 kv sub station panki, kanpur-1. five bolted type tension fitting for panther conductor complete with galvanized ball eye, socket eye, dshackle with 05 nos. u-bolts. 2. four bolted type p.g. clamps suitable for tarantula to panther conductor. made of lm-6 alloy with galvanized nut & bolts. 3. four bolted type p.g. clamps suitable for tarantula to panther conductor. made of lm-6 alloy with galvanized nut & bolts. 4. copper bond 15 mm. dia. and 500 mm. long made by flexible copper wire rope with both side lug fitted/punched. 5. g.i. perforated cable tray of size 100 mm. wide and 2.50 mtr. long. 6. g.i. perforated cable tray of size 150 mm. wide and 2.50 mtr. long.
supply of hardware fittings 1 spacers 25o mm size suitable for moose conductor isolator connectors for twin moose, zebra — conductor pg clamp made of aluminum alloy lm-6 suitable for moose to panther conductor
procurement of jaw and terminal connectors of isolator at 220 kv sub station panki, kanpur-supply of jaw for 220 kv hivellum make isolator made of electrolyte copper strips with housing, spring and nuts & bolts as per sample , supply of jaw for 132 kv hivellum make isolator made of electrolyte copper strips with housing, spring and nuts & bolts as per sample , supply of terminal connector for 220 kv hivellum make isolator jaw plate and other end moose conductor made of lm-6 aluminum alloy with galvanized nuts & bolts as per sample , supply of terminal connector for 132 kv hivellum make isolator jaw plate and other end moose conductor made of lm-6 aluminum alloy with galvanized nuts & bolts as per sample
procurement of medicine:-37 012475 salbutamol aerosol inhalation pack of 200 metered dose ( each metered dose supplies 100mcg of salbutamol ) 38 050602 vaccum blood collection tubes sterile tube with gel 39 050604 vaccum blood collection tubes sodium citrate 40 050605 vaccum blood collection tubes sodium fluoride 41 10277 syp paracetamol 42 170206 kits for estimation of sgpt ( ast ) 43 012206 cefixime syp 50mg / 5ml bott of 30 ml 44 012210 cetrizine syp 5mg / 5ml bott of 60 ml 45 012245 roxythromycin 50mg / 5ml syp in bott of 30 ml 46 11251 febuxostate 40 mg tab 47 11340 ketokonazole lotion 2% bott / 75ml 48 12238 ondansetron syp 2 mg / 5ml in bott of 30 ml 49 011100 atorvastatin 10 mg tab 50 11637 pantoprazole 40 mg tab 51 502 lumber belt large 52 niv / 12 knee cap ( medium size ) 53 niv / 12 heel cap silicon ( cushion ) 54 niv / 12 corn caps 55 10123 inj lignocaine with adrenaline cartridge 56 11251 paste desensitizing 57 11246 chlorihexidine mouth wash 58 100108 antiseptic pain relieving gel 59 100958 instruments , hand , dental toot canal treatment set of ''6'' head stroerm file size 15 to 40 -21 mm length 60 100902 alloy fine grain bott of 30 gms ( silver 88% , tin 26.8 %, copper 4.4%, zinoin traces ) 61 100954 lining cavity composite cal hyd.acsed photocure 62 niv / 10 disposable pmt set 63 niv / 10 interdental brush colgate 64 niv / 10 katac molar glass ionomer cement 65 niv / 10 calicum hydroxide powder 66 niv / 10 k- files size''8'' of 21 mm length set of ''6'' 67 niv / 10 k -files niti size ''10'' of 21 mm length set of ''6'' 68 niv / 10 k-files niti size ''15'' of 21 mm length set of ''6'' 69 niv / 10 k-files niti size ''20'' of 21 mm length set of ''6'' 70 niv / 10 k-files niti size ''25'' of 21 mm length set of ''6'' 71 niv / 10 dental younifloss pkt
rate of dental materials out of regt fund :-1 alloy high speed grinder with suction 2 apex locator ( voice free touch screen )
auction sale of property:-property belongs to ms sudhan foundry alloys
supply of petty tools and equipments-43 electrician screw driver insulated 44 electrician electrician screw driver thin stem insulated handle 45 electrician heavy duty screw driver insulated 46 electrician electrician screw driver thin stem insulated handle 47 electrician punch centre 48 electrician knife double bladed electrician 49 electrician neon tester 50 electrician steel rule graduated both in metric and english unit 51 electrician hammer, cross peen with handle 52 electrician hammer, ball peen with handle 53 electrician pincer 54 electrician allen key alloy steel 55 electrician file flat 56 electrician file half round 57 electrician file round 58 electrician hand vice 59 electrician copper bit soldering iron. 60 electrician table vice 61 electrician hand drill machine 62 electrician portable electric drill machine 63 electrician series test lamp 64 electrician out side micrometer 65 copa screw driver set 66 copa white board 67 copa crimping tool 68 copa punching tool 69 copa ms office 70 copa pigeon hole cabinet 71 copa printer table 72 copa computer table 73 sewing technology measuring tape 74 sewing technology seam ripper 75 sewing technology thimble 76 sewing technology tailor’s card scale triangular 77 sewing technology tailors square – plastic 78 sewing technology french curve set of three 79 sewing technology thread cutter 80 sewing technology scale plastic 81 sewing technology scissors 82 sewing technology leg shaper 83 sewing technology garment hangers 84 sewing technology screw driver set 85 sewing technology table sharpener 86 sewing technology pressing table 87 sewing technology blanket for padding of pressing table 88 sewing technology rubber mat (size as per requirement) 89 90 sewing technology sewing technology sprayer stand for hanging dresses 91 sewing technology electric automatic steam press
supply of anderson make psv spares :-o ring for main vlv , guide , nozzle ring , adj.bolt, set screw, adj.bolt, set screw , gasket, soft ss316, spindle , disc insert, nozzle ring, disc holder, disc insert w retention clip, bellow gasket, spindle single piece , gasket set, soft ss316, pspindle assy, spindle, base, special metal alloysbell.&tailpiece assy, bell.&tailpieceassy;spring with washers, alloy steel, spring with washers, alloy steel, inconel x750 spring, spring with washers, spring x09746 , 17-7 phss spring, , chrome steel spring, chrome steel spring, spring with washers, nozzle ,
disposal of scrap items at mtps-i e-auction through m/s mstc ltd/ chennaidisposal of m.s.scrap cast iron scrap cupronickel tube scrap deal wood scrap auto parts scrap rubber scrap s.s. scrap aluminum alloy scrap aluminum scrap etc.,
corrosion resistant low alloy steel of thickness 3.15 mm to specn jisg 3125 / astm588 gr a.
Copyright © 2019 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
