Tender For Equipment Required In Pediatrics Department: Transport Incubator, Pediatrics Intubating Mannequin: For 1. It Should Be Designed With A Unique Hygienic System. 2. It Should Have Protection From Cross Contamination. 3. It Should Be Maintenance Free. 4. It Should Be Made Of High Quality Material That Ensure Long Life. 5. The Head Should Be Rotatable And Extendable 6. Airway Should Open In The Correct (Sniff) Position. 7. Stomach Ventilation Should Be Visual. 8. Realistic Anatomy Should Allow The Trainee To Find Correct Compression Point, Making The Chest/ Abdomen Rise Realistically. 9. Brachial Pulse Should Provide Correct Realistic Training. 10. Obstruction Of The Airway By An On/ Off Slider Can Be Stimulated By The Instructor. 11. It Should Have Provision Of Comfort And Safety Through Look Listen-Feel Concept. 12. Intubation Trainer For Teaching Intubation Techniques With Laryngoscopes, Airways, Endotracheal Tubes, Lma(Laryngeal Mask Airway) And Other Auxiliary Aids For Airway Management Should Have Following Features: 13. Accurate Simulation Of Mouth, Nostrils, Teeth Tongue, Pharynx, Larynx, Epiglottis, Vocal Cords, Trachea, Oesophagus And Lungs. 14. Realistic Lifting And Tiling Of Head. 15. Realistic Movement Of The Head, Cervical Spine And Jaw To Stimulate Relevant Anatomical Changes During Intubation. 16. The Left Side Of The Head Should Be Open To Permit Supervision Of The Student’S Performance. 17. Training Should Be Possible With Endotracheal Tube, Nasotracheal Tubes, Fibre Optic Intubation, Lma, Oropharyngeal Airway, Nasopharyngeal Tubes Etc. 18. Should Have Sensitivity Adjustable Acoustic Audio Alarm Triggered By Excess Pressure On The Upper Teeth. 19. The Model Should Provide Thoracic Movement By Positive Pressure Ventilation With The Help Of Bag Valve Mask. 20. The Following Training Should Be Practised In The Model: One-Side Lung Intubation Nasal And Oral Suction Chest Compression 21. The Model Should Be Made Of Silicon Rubber And Should Have Similar Appearance Like Human Body. 22. The Main Body Should Be Supplied With Silicon Spray And Storage. 23. The Equipment Should Be Usfire Detection And Alarm Or European Ce Approved. 24. Rates Of Consumables And Accessories Should Be Quoted Separately In The Financial Bi Heated Humidified High Flow Nasal Cannula: For 1. Delivers Servo Controlled, Humidified, Heated, Air Oxygen Blended Gas. 2. It Should Have Integrated Motor/Turbine To Deliver Air Flows With Flow Settings Of 2 To 25 L/Min (In Increments Of 1L/Min). 3. Inbuilt O2 Sensor To Deliver The Fio2 From 21Perc. To 100Perc. 4. It Should Have Inspiratory Tubing With Inbuilt Spiral Heater Wire For Superior Condensate Control In Varying Environments. 5. The Tubing Should Light Weight And Flexible. 6. Graphical/Numerical Display Menu For Settings Of Fio2 & Temperature. 7. Visual Alarm Of Malfunctioning Of Temperature And Fio2. 8. Should Be Supplied With Pole/Trolley To Install The Machine 9. The System Should Have Inbuilt Disinfection Mode To Disinfection The Internal Blower Of The Machine To Prevent Cross Infection. 10. Should Be Supplied With A Suitable Voltage Stabilizer With The Machine. 11. Accessories To Be Supplied: Nasal Cannula For Premature Neonates: 20, Nasal Cannula For Neonates: 20, Nasal Cannula For Infants And Pediatric Patients: 20; Circuit: 30 12. Electrical Rating: 50-60 Hz 100-220V ~ 2.2 A (2.4 A Max). 13. Original Literature, And Not The Photocopy, To Be Supplied With The Quotation. 14. List Of Essential Spares, Accessories, Expendables And Consumables Expected To Be Used In One Year Should Be Provided And Quoted Separately. Prices So Quoted To Be Frozen For 7 Years Including Warranty. Frozen Rate Should Not Be More Than Price Of The Quoted Rate At The Time Of Purchase. 15. All Items Should Comply With The International Safety Regulation And Certification And Should Be Us Fire Detection And Alarm Approved Fibreoptic Bronchoscope: For A) Adult Fibre Optic Bronchoscope -2.8 Mm 1. Field Of View Should Be 120 Degree Or More 2. Depth Of Field Should Be 3 – 50 Mm Or Better 3. Distal End Diameter Should Be 6 Mm Or Less 4. Insertion Tube Diameter Should Be 6 Mm Or Less 5. Channel Diameter Should Be 2.8 Mm Or More 6. Should Be Light Weight And Easy To Use 7. Working Length Should Be 600 Mm Or More 8. Total Length Should Be 890 Mm Or Better 9. Up And Down Angulation Should Be 180 Degree And 130 Degree Or Better 10. Should Have Telescopic Eye Piece 11. Can Be Fully Immersed In Disinfectant Solution And Water 12. Should Have Autoclavable Suction Valve To Avoid Cross-Contamination Risk. 13. Should Have Facility To Check Leakage By Automatic Pressure Regulated Leak Tester. 14. Should Be Compatible With 150 Watt Halogen Light Source. B) Pediatric Fibre Optic Bronchoscope- 4.4 Mm 1. Large Field Of View Should Be 120 Degree Or More 2. Depth Of Field Should Be 3 – 50 Mm Or Better 3. Distal End Diameter Should Be 3.4 Mm Or Less 4. Insertion Tube Diameter Should Be 3.6 Mm Or Less 5. Channel Diameter Should Be 1.2 Mm Or More 6. Should Be Light Weight And Easy To Use 7. Working Length Should Be 550 Mm Or More 8. Total Length Should Be 840 Mm Or Better 9. Up And Down Angulation Should Be 180 Degree And 130 Degree Or Better 10. Can Be Fully Immersed In Disinfectant Solution And Water 11. Should Have Autoclavable Suction Valve To Avoid Cross-Contamination Risk. 12. Should Have Facility To Check Leakage By Automatic Pressure Regulated Leak Tester. 13. Should Be Compatible With 150 Watt Halogen Light Source. C) Ultra Slim Bronchoscope -6Mm 1. Field Of View : 90 Degree Or More 2. Direction Of View : 0 Degree, Forward Viewing 3. Depth Of Field : 2 To 50 Mm Or Better 4. Distal End Outer Diameter : 2.8 Mm Or Less 5. Insertion Tube Outer Diameter : 2.8 Mm Or Less 6. Tip Bending Range : Up 180 Deg Or More, Down 130 Deg Or More 7. Working Length : 550 Mm Or More 8. Channel Inner Diameter : 1.2 Mm Or More 9. Minimum Visible Distance Of : 1.5 Mm Or Closer From Distal End. 10. Leakage Tester Should Be Provided Along With The System. 11. 4 Halogen Bulbs Should Be Supplied With The Bronchoscope. 12. 4 Biopsy Forceps Should Be Supplied With Bronchoscope. 13. All Standard Accessories Must Be Quoted Separately And Should Be Usfire Detection And Alarm And European Ce Approved. Standard Accessories Should Contain Eyepiece Cap, Eto Cap And Carrying Case, Cleaning Brush, Cylinder Cleaning Brush, Rubber Inlet Seals Eta) Adult Fibre Optic Bronchoscope -2.8 Mm 1. Field Of View Should Be 120 Degree Or More 2. Depth Of Field Should Be 3 – 50 Mm Or Better 3. Distal End Diameter Should Be 6 Mm Or Less 4. Insertion Tube Diameter Should Be 6 Mm Or Less 5. Channel Diameter Should Be 2.8 Mm Or More 6. Should Be Light Weight And Easy To Use 7. Working Length Should Be 600 Mm Or More 8. Total Length Should Be 890 Mm Or Better 9. Up And Down Angulation Should Be 180 Degree And 130 Degree Or Better 10. Should Have Telescopic Eye Piece 11. Can Be Fully Immersed In Disinfectant Solution And Water 12. Should Have Autoclavable Suction Valve To Avoid Cross-Contamination Risk. 13. Should Have Facility To Check Leakage By Automatic Pressure Regulated Leak Tester. 14. Should Be Compatible With 150 Watt Halogen Light Source. B) Pediatric Fibre Optic Bronchoscope- 4.4 Mm 1. Large Field Of View Should Be 120 Degree Or More 2. Depth Of Field Should Be 3 – 50 Mm Or Better 3. Distal End Diameter Should Be 3.4 Mm Or Less 4. Insertion Tube Diameter Should Be 3.6 Mm Or Less 5. Channel Diameter Should Be 1.2 Mm Or More 6. Should Be Light Weight And Easy To Use 7. Working Length Should Be 550 Mm Or More 8. Total Length Should Be 840 Mm Or Better 9. Up And Down Angulation Should Be 180 Degree And 130 Degree Or Better 10. Can Be Fully Immersed In Disinfectant Solution And Water 11. Should Have Autoclavable Suction Valve To Avoid Cross-Contamination Risk. 12. Should Have Facility To Check Leakage By Automatic Pressure Regulated Leak Tester. 13. Should Be Compatible With 150 Watt Halogen Light Source. C) Ultra Slim Bronchoscope -6Mm 1. Field Of View : 90 Degree Or More 2. Direction Of View : 0 Degree, Forward Viewing 3. Depth Of Field : 2 To 50 Mm Or Better 4. Distal End Outer Diameter : 2.8 Mm Or Less 5. Insertion Tube Outer Diameter : 2.8 Mm Or Less 6. Tip Bending Range : Up 180 Deg Or More, Down 130 Deg Or More 7. Working Length : 550 Mm Or More 8. Channel Inner Diameter : 1.2 Mm Or More 9. Minimum Visible Distance Of : 1.5 Mm Or Closer From Distal End. 10. Leakage Tester Should Be Provided Along With The System. 11. 4 Halogen Bulbs Should Be Supplied With The Bronchoscope. 12. 4 Biopsy Forceps Should Be Supplied With Bronchoscope. 13. All Standard Accessories Must Be Quoted Separately And Should Be Usfire Detection And Alarm And European Ce Approved. Standard Accessories Should Contain Eyepiece Cap, Eto Cap And Carrying Case, Cleaning Brush, Cylinder Cleaning Brush, Rubber Inlet Seals Etc Halogen Light Source, Patient Warming System
