Machinery and Tools, Tools and General Machinery, Spare Part-Uttarakhand

Tender For High Speed Pneumatic Drill System Of Neurosurgery. (C. System Configuration Accessories, Spares And Consumables Quote All Accessories Including: C1 Handpieces (For Micro Neuro Surgery): 1. Straight Hand Piece Short-1 No 2. Straight Hand Piece Medium-1 No 3. Straight Hand Piece Long -1 No 4. Minimal Access Attachment Long -1 5. Angled Hand Piece Short-1 No 6. Angled Hand Piece Medium-1 No 7. Angled Handpiece Long -1 No 8. Attachment For Trans Oral/ Transsphenoidal Surgery -1 No C2. Oscillating Saw Attachment-1 C3. Reciprocating Saw Attachment -1 C4. Saggital Saw Attachment-1 C5. Craniotomy Attachment: 1. Craniotome Handpiece 02 2. Fixed Duraguard Adult 02 3. Fixed Duraguard Pediatrics 02 C6 . Craniotome Cutter (Bits): 1. Craniotome Cutter (Bits) Pediatrics 20 2. Craniotome Cutter (Bits) Adult -20 C7. Perforator: 1. Perforator Driver With Speed Reduction- 01 2. Cranial Perforator, 9X12mm, Hudson Type- 02 3. Cranial Perforator, 6/9Mm, Hudson Type -02 4. Hudson Chuck- 01 C8. Adjustable Drill Guide-1 C9. Burrs: 1. Rosen Burr For Medium Hand Piece 10 2. Diamond Burr For Medium Hand Piece 10 3. Diamond Burr For Large Hand Piece 5 4. Barrel Burr For Medium Hand Piece 10 5. Barrel Burr For Large Hand Piece 5 6. Acorn Burr For Small Hand Piece 10 7. Pin Point Burr For Medium Hand Piece 25 8. Twist Drill For Small Hand Piece 10 9. Burrs (Fluted And Diamond) For Trans Oral/ Trans Sphenoidal Hand Piece- 5 Each 10. Saw Blade For Reciprocating Saw, For Neurosurgical Use-1 Set 11. Saw Blades For Oscillating Saw For Neurosurgical Use-1 Set 12. Saw Blade For Saggital Saw-1 Set For Neurosurgical Use D. Storage And Maintenance: 1. Oil Spray For High Speed Motor And Hand Pieces - 6 Nos. 2. Oil Spray For Perforator - 5 Nos. 3. Adapter For Oiling 4. Seal Nipple For Air Drive 5. Autoclavable Perforated Container With Covering Lid With Holders For Motors, All Hand Pieces, Hose, Tools And All Other Accessories. Container Should Be From The Same Manufacteurer. E. Environmental Factors 1. Shall Meet Iec-60601-1-2:2001(Or Equivalent Bis) General Requirements Of Safety For Electromagnetic Compatibility Or Should Comply With 89/366/Eec; Emc-Directive. 2. The Unit Shall Be Capable Of Being Stored Continuously In Ambient Temperature Of 0 - 50Deg C And Relative Humidity Of 15-90% 3. The Unit Shall Be Capable Of Operating Continuously In Ambient Temperature Of 10 -40 Deg C And Relative Humidity Of 15-90% F. Power Supply 1. Power Input To Be 220-240Vac, 50Hz Fitted With Indian Plug. G. Standards, Safety And Training )

INR 1135 /-

INR 111000.0 /-

Refer document