Supply Of Phase Noise Test SystemFrequency Range : 10 Mhz To 7 GhzMinimum Input Level : -20 DbmOffset Frequency : 1 Hz To 100 MhzMeasurement Parameters: Ssb Phase Noise [Dbc/Hz], Spurious Noise [Dbc], Integrated RmsPhase Deviation [Deg, Rad] Or Time Jitter [S], Residual Fm [Hz Rms]C) 20 Ghz Local Oscillator1. Frequency Range : 9Khz To 20 Ghz2. Resolution : 0.01 Db3. Max Standard Output Power :+18 Dbm4. Ssb Phase Noise : -129Dbc/Hz @ 250 Mhz5. Operating Temperature Range : 0 To 55 C6. Calibration Cycle : 36 MonthsFrequency Transient Capture Range: Up To 80 Mhz In Narrow Band, Up To 4.8 Ghz In WideBandAm Noise Measurement And Phase Noise Measurement Without Changing Rf ConnectionSpectrum Monitoring Up To 15 Mhz Span In A Real-Time ModeSimultaneous Transient Measurements For Frequency, Phase And Power Over TimeClock Jitter Measurement With Femto-Second ResolutionFrequency Resolution: 10Hz, 1 Khz, 64KhzSweep Measurement Time: 10Us To 10 SPhase Noise Sensitivity @ 1 GhzA. @ 100 Hz Offset : -116 Dbc/HzB. @ 1Khz Offset : -135Dbc/HzShould Support Two External Frequency Ref For Cross-CorrelationFrequency Transient Bandwidth (Narrow Band) : 80 Mhz MaxShould Be Able Measure The Following At The Same Time : Frequency (Narrow Band,Wideband), Power (Narrow Band ) And Phase (Narrow Band)Capability To Upgrade The Frequency Range To 26.5GhzSpecifications For Signal AnalyzerFrequency Range : 3 Hz To 26.5 GhzMaximum Input Level : +30 DbmAnalysis Bandwidth Of 10Mhz And Upgradable Upto 160MhzBuilt In Preamp Upto 26.5GhzInput Attenuator Range : 0 To 70 Db In 2 Db StepsFrequency Response : ±0.46 Db @ 10 MhzPreamplifier : Upto 26.5 GhzDanl : -172 Dbm @ 5.95 GhzPhase Noise Accuracy Upto : ± 0.20 DbFrequency Span: Zero Span, 10 Hz To 26.5GhzMin Sweep Time: 1Us At Zero Span And 1 Ms At Non Zero SpanBuilt In Noise Floor EnhancementTrace Detectors: Normal, Peak, Sample, Negative Peak, Average (Log-Power, Rms, Voltage)Built In Persistence Spectrum And SpectrogramShould Have Phase Noise Measurement Application With One Button Measurement ForAnalyzing Phase Noise In Frequency Domain (Log Plot) And Time Domain (Spot Frequency)Modulation Analysis: Am,Fm, Bpsk, Qpsk, 16Qam, 64Qam, Gsm, Bluetooth,Capability To Upgrade For Baseband Inputs And For Real Time Spectrum Analysis15 Licenses Of Vector Signal Analysis Software Required (Should Support As Many SignalStandards And Modulation Types As Possible)The Demodulation Software Should Support The Below Modulation Techniques• Cellular Communications: Lte- Advanced, Lte, W-Cdma Hspa+, Gsm/EdgecEvolution, Cdma2000®, Td-Scdma• Wireless Connectivity: 802.11A/B/G/Ac,, 802.11N, 802.16 ,Ofdma, Wimax™,Bluetooth®, Zigbee, Uwb, Rfid• Aerospace, Defense And Satellite Applications: Custom Apsk, Fsk, Bpsk, Qpsk,Qam, Starqam, Apsk, Vsb• Custom Ofdm:• Mimo And Multi- Channel TestSoftware Should Have The Below Capabilities• 20 Traces, Each With Unlimited Markers• Create And Run Multiple Independent Measurements, Simultaneously• Analysis Of Multiple Component Carriers Simultaneously
