Machinery and Tools, Tools and General Machinery, Forming Tools, Hyderabad-Andhra Pradesh

Bam Fall Hammer Impact Sensitivity Test Equipment1 Bam Fall Hammer Main Unit Consisting Cast Steel Stand, Anvil, Column With Graduated Scale, Guiders, Pneumatic Releasing Device, Protective Box With Polycarbonate Protective Window Dropping Height -100 Cm (Min) Comprehensive Instrument Manual 2 Drop Weight (Including Calibrations Certificate) Drop Weight 0.5 Kg Drop Weight 1.0 Kg Drop Weight 2.0 Kg Drop Weight 5.0 Kg 3 Explosion Proof Suction Device -Radial Fan (230V/50Hz, Ip 54) With Airflow 550 M3/Hr 4 Standard Metric Ruler Drop Height From 0-1Cm (Graduation Of 0.5 Cm) 5 Set Of Metric Socket Screws 6 File Plate Holder (For Locating The File Plate On The Main Anvil)7 Distance Calibrator For Liquid Samples 8 Fine Drawn Pipette For Liquid Substances 9 Steel Cylinder ∅ X L 10 X 10 Mm; Set Of 200 Pieces 10 Steel Cylinder ∅ X L 16 X 13 Mm; Set Of 100 Pieces 11 File Plate 20 X 20 X 5 Mm; Set Of 100 Pieces 12 Rubber ‘O’ Ring For Liquid Samples; Set Of 100 Pieces 13 Spare Cylindrical Striking Head For A Drop Weight (Hardness 60 Hrc) Fit For 1 Kg Drop Weigh) 14 Spare Cylindrical Striking Head For A Drop Weight (Hardness 60 Hrc) Fit For 2 Kg And 5 Kg Drop Weigh) 15 Spare Steel Anvil 26 X 26 Mm (60 Hrc) 16 Conductive Brush, Width 25 Mm (Comply With En 61340-5-1) (To Sweep Up Waste Dust From Explosives) 17 Small Air Compressor (Working Pressure 6 Bar) Bam Friction Sensitivity Test Equipment 1 Set Of Standard Bam Weights With Hook Load Force On The Peg: From 0.5 To 360 N Set Of 9 Bam Weights/1 Pc Of Hook; 0.28-10.08 Kg (5-360 N) Set Of 4 Light Weights; 0.5-5 N 2 Working Table (60 X 120 X 80 Cm), Covered Electrostatic - Conductive Rubber 3 Velocity Of Moment 140 Rpm As Standard, Velocity Adjustable From 20 To 300 Rpm4 Motor: Step Drive Type. It Shall Ensure Precise Positioning And Movement Needs To Be Independent On Loading, Ie., Speed Of Movement Is Not Influenced By Loading. It Shall Work On Low Power Supply Of 36 V. It Shall Have Protection As Per Minimum Ip 54. 5 Porcelain Pegs, ∅ X L 10 X 15 Mm; Set Of 400 Pieces 6 Porcelain Plates - Double Sided, W X L X H-25 X 25 X 5 Mm; Set Of 100 Pieces 7 Protective Shield (Protect The Personnel Against The Fragments Arise Out Of Plate Of Peg) 8 Conductive Brush (Comply With En 61340-5-1)

Refer document

Refer document

Refer document