Tender For Repair Maintenance Of Mes Installation Under Age Br-Ll Under Ge (Nw) Nofra.
Tender Value
48 Lakhs
Estimated cost
Bid Submission
10 Dec 2026
19 days left
EMD
96000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Maintenance Of Mes Installation Under Age Br-Ll Under Ge (Nw) Nofra.
BOQ
| Sl. No. | Item Description |
| 1 | Material & Labour for Preparation old plastered / decorated surface of wall, including filling of nail holes, cracks and minor undulations on surface with suitable putty etc by brooming down and applying two coat of oil bound distemper with smooth roller finish ,complete all as specified and directed by Engineer in Charge. |
| 2 | Material & Labour for Preparation of old/New decorated surfaces of walls and applying two coats of 100% acrylic exterior weather proof emulsion paint of approved make,on Old surfaces with anti-algae and anti-fungal properties, over one coat of primer, including surface preparation, scaffolding, curing, etc. complete as per manufacturer’s specification and direction of engineer in charge. |
| 3 | Material & Labour Preparation of old painted steel based surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint with smooth roller finish etc complete all as specified and directed by Engeer- in charge. |
| 4 | Demolition brick work or stone/boulder masonary built in cement mortar and removing the rubbish outside MD land complete all as specified & directed. |
| 5 | M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete as specified & directed. |
| 6 | Taking down cement plaster on brick or stone wall including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified |
| 7 | M&L for rendering 15mm thick CM 1:6 on fair face of brick work or concrete surfaces of walls and finished surfaces even and smooth without using extra cement, complete all as specified |
| 8 | M&L for 15mm thick plastering in cement & sand mortar 1:4 in on fair faces of brick work or stone masonary surfaces, finished even and smooth (without using extra cement) all as specified and directed including all necessary scaffolding etc complete. |
| 9 | M&L for rendering 10 mm thick cement plastering on brick or concrete surfaces of ceiling in CM (1:4) finished even and smooth without using extra cement all as specified and directed, complete all as specified and directed. |
| 10 | M&L for preparation of newly plastered surfaces of wall and applying two coats of oil emlusion distemper white or tinted over a coat alkali resistant priming paint over 2mm thick wall care putty on wall complete all as specified and as directed . |
| 11 | M&L for preparation of newly plastered surfaces and of ceiling applying two coats of oil emlusion distemper white or tinted over a coat alkali resistant priming paint over 2mm thick wall care putty on wall complete all as specified and as directed . |
| 12 | Taking down chowkats or frames but n exc 1.5 Sqm Each but with shutters (without taking off shutters from the frame) |
| 13 | Taking down chowkats or frames exc 1.5 Sqm but n exc 4 Sqm Each but with shutters (without taking off shutters from the frame) |
| 14 | Taking down shutters of any description exc 1 Sqm and n exc 2 sq.m Each |
| 15 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. |
| 16 | M&L factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screwsand as per specification & drawing complete all as specified and directed. |
| 17 | S&F 2nd class hard wood (sal) plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints all as specified. |
| 18 | S&F 35mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides, one face covered with decorative face veneer with lipping/ frame to match complete all as specified and directed. |
| 19 | Providing and fixing factory made uPVC white colour Sliding window (Area not exceeding 2.00Sqm Each) Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), 2 sliding Glass sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. including Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) |
| 20 | M&L for preparation of newly wooden surfaes of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer incl preparation of surfaces. |
| 21 | S&F powder coated (colour of coating as directed) aluminium (minimum 25 micron thickness of coating) of various section as required/suitable for doors, window & partion/Ventilator (sliding /or openable type)etc including fixing and making the frames hinges to receive glass/wire gauge etc. Complete incl all fittings like jointing cleats, glazing clips, rubber neoprene packing. anodised aluminium snap beading screws etc. rubber beading, clips locking arrangement, handle, sealant etc all as specified and as directed. |
| 22 | M&L 18 mm thick commercial plywood (IS), Grade BWR, Type BB, fixed with screws to timber framework, including 1st class hardwood lipping all around the shutter/edges, for wardrobe and cupboard shelves, including cutting, sizing, shaping and arranging/fixing in the required shape and dimensions, complete as directed. |
| 23 | M&L 0.9mm thick decorative laminate type 1, of surface finish, colcur and pattern as approved, fixed with approved adhesive as per maker's instructions. |
| 24 | Supply and Fix 4.0mm thick glass sheet ordinary quality and glazing with oil putty fixed with beads in Each pane complete all as specified and as directed. |
| 25 | S&F Aluminum alloy anodized sliding door bolt 300mm long with hasp and staple (bolt type) and fixing bolts and sliding bolts of extruded such or cast aluminum alloy complete all as specified and as directed. |
| 26 | S&F 100mm stainless steel butt hinges medium weight fixed with Stainless Steel Screws |
| 27 | S&F Aluminium alloy anodised barrel tower bolt 200 mm long complete all as specified and as directed |
| 28 | S&F extruded aluminium alloy handle fabricated type anodized 150mm long complete all as specified and as directed |
| 29 | S&F 150 mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed with stainless steel screws complete all as specified and directed. |
| 30 | S&F in repairs aluminium grill with and including suitable aluminium anodised frame F/H section as requird manufactured by M/S Decogrill as per design No DG- 104, 7.5 mm thick all as specified and as directed by Engr- in- charge. |
| 31 | Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and disposing the rubbish to the out side of MD land |
| 32 | M&L for Non skid coloured ceramic tiles 9 to 10 mm thick (square/Rectanglar) area of Each tiles exc 0.18 Sqm but n exc 0.38 Sqm in floor including 15mm thick screed bed or bedding layer for laying floor finishes in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match. |
| 33 | M&L for coloured glazed ceramic tiles 450x300x7 / 350x250 x7 mm mm thick but as on vertical surfaces such as skirting/dado including 15mm thick backing coat in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed. |
| 34 | Dismantling stone slabs and tiles of any description or thickness in floors laid bedded and pointed in any mortar, complete all as specified. |
| 35 | M&L 20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like over and including 20 mm thick screed bed or backing coat in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including moulding and rounding all as directed. |
| 36 | M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed bed in CM (1:4) 15mm thick, & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete. |
| 37 | Supply & fix in repair false ceiling at all heights with semi perforated 12mm thick micro tegular edged GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRCO.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to. be laid in true horizontal level suspended on inter- locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15. x 32 mm of length 3000mm, cross-T of. size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto required length and L- shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specification Drawing and as per directions of the Eng-in- Charge. |
| 38 | Dismantling wrought iron or mild steel work of any description not otherwise provided for. |
| 39 | S&F Framed work such as grills, gratings, angle iron, posts, pipe sections, railings, frame work for fencings etc. with ends of bars shouldered and/or riveted, or forged into spikes; door shutters with gusset plates, braces, frame work for roof shed etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and similar work conforming to Fe.290.Gde-E-165 at any height including necessary scaffolding complete all as specified and as directed. |
| 40 | S&F mild steel gates, fabricated from various M.S. sections, including cutting, welding, grinding, buffing, polishing and forming curves wherever required, and fixing the same with necessary mild steel nuts and bolts, complete. The gates shall be properly framed and hung with necessary hinges, stops, locking arrangements and all other required accessories, complete in all respects, conforming to Fe-290, Grade E-165, and as specified by Engineer in Charge. |
| 41 | Supply only Chain link MS galvanisd fencing, any size or type, complete all as specified. |
| 42 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire, complete all as specified. |
| 43 | M&L for preparation of new steel surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified incl all necessary scaffolding etc. |
| 44 | M&L for preparation of old steel surfaces of any description and applying one coat of synthetic enamel paint complete all as specified incl all necessary scaffolding etc. |
| 45 | S&F in repair for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 46 | Excavating over areas not exc 1.5 mtr in depth and n exc 1.5 mtr in width for foundation etc and getting out in hard/ dense soil complete all as specified and directed. |
| 47 | Returning, filling in including spreading, levelling, watering and well ramming in layers not exceedingeeding 25 cm |
| 48 | Removing excavation material exceeding 1.50 km but n exceeding 15 km and depositing where directed |
| 49 | Demolition of Reinforced cement concrete of any description and any position complete all as specified and directed. |
| 50 | M&L for cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) in foundation filling and mass concreting complete all as specified and directed. |
| 51 | M&L for RCC (design mix) M-30 (using 20mm graded stone aggregate) as in footing, foundation beams, plinth beams, bases for columns, etc, basement slabs, under reamed piles and mass concrete complete all as specified and directed. |
| 52 | M&L for RCC (design mix) M-30 (using 20mm graded stone aggregate) as in Columns, pillars, piers, posts and struts complete all as specified and directed. |
| 53 | Use & Waste of flat Formwork to sides of pillars, posts, struts, piers, columns and stanchions fair finished surfaces. |
| 54 | M&L Mild steel TMT bars 5mm dia and over upto and including 10mm dia as in stirrups cut to length bent to shape required including cranking ,bending , binding with MS wire not less than 0.9 mm dia (annealed) confirming to Fe-410 (Gde E-165) complete all as specified and directed. |
| 55 | M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips confirming to Fe-410 (Gde E-165) complete all as specified and directed. |
| 56 | Taking down eaves gutters and rainwater pipes of any dia (any size or pattern ) including all fittings, heads, shoes, bends, swan necks etc (Measured overall as fixed along the centre line over fittings and accessories) & ht. upto 16th floor of bldg., complete all as specified. |
| 57 | S&F 160 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including fixing clips, elbows, shoes etc & ht. upto 16th floor of bldg., complete all as specified. |
| 58 | S&F PVC (SWR) bends of 160 mm bore & ht. upto 16th floor of bldg., complete all as specified. |
| 59 | S&F in repairs white vitreous china wash down water closet pan (pedestal pattern) including fixing bolt with and including plastic water closet seat cover closed pattern with flat bottom and cover and MSCP aluminum hinges device complete connecting to P or S trap all as specified and directed. |
| 60 | S&F in repair vitrous china squatting pan 'Orrisa Pattern' size 580x440mm white with integral foot rest including connecting and necessary provision of cement concrete and making good complete all as specified and directed by Engr-in-Charge |
| 61 | S&F in repair wash hand basin vitreous china white flat back or angle type of size 580mmx450mm including waste chain and plug and porcelain stopper, a pair of brackets or errecting stand and etc. complete all as specified and directed. |
| 62 | S&F in repair PVC low level flushing cistern including brackets 10 litre capacity ,Dual flush type with inlet ball valve float, handle,flush pipe etc. |
| 63 | S&F in repairs 15mm pillar taps, cast copper alloy with Flat type handle chromium plated, fancy type screw down high pressure with long screwed for iron pipe all as directed. |
| 64 | S&F in repairs CP stop cock/ angular stop cock 15 mm bore all as specified and directed. |
| 65 | S&F in repairs bib tap 15 mm dia , One way/ two way CP cast copper alloy chromium plated with Flat type handle screwed down for iron pipe or for brass ferrule all as directed |
| 66 | S&F in repairs stainless steel grating cover 100mm dia complete all as specified and directed. |
| 67 | S&F in repair decorative glass corner shelf round 10mm thick, 300mm size with stainless steel railing, fixed with D type stainless steel bracket on wall of approved design and pattern all as specified. |
| 68 | S&F in repair of 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings , concealed/opened on walls/ceiling or laying in floors. Complete all as specified. |
| 69 | Supply and fix in repairs 2000 Litres, Triple layer rotational moulded PVC tank in position at any location on top of the building including removing existing tank disconnecting all incoming and out going connections, provision of new fittings suitable up to 80mm bore GI pipe all as per existing requirements all as specified and directed. |
| 70 | Supply and fix in repairs 1000 Litres, Triple layer rotational moulded PVC tank in position at any location on top of the building including removing existing tank disconnecting all incoming and out going connections, provision of new fittings suitable up to 80mm bore GI pipe all as per existing requirements all as specified and directed. |
| 71 | S&F in repairs steel rolling shutters of 1.25mm thickness of laths, including ball bearing as specified including top cover, anchoring rod, hasp and staple, erected in position as indicated, complete but gear operated type with bevel gear box and crank handle including painting of rolling shutter with two coats of synthetic enamel paint over one coat of red oxide complete all as specified. |
| 72 | Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) ,Including existing roof treatment of any type, complete all as specified. |
| 73 | M&L for cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in roof padding complete all as specified and directed. |
| 74 | M&L for water proofing treatment to RCC roof slab all as specified below and as directed:-(a) Apply one coat of bitumous primer @ 0.25 Kg/Sqm. (b) Apply a coat of blown type bitumen grade 85/25 heated to working temperature of 180 degree centigrade and applied at 1.20 Kg/Sqm of the surface area. (c) Laying APP polymer modified membrane 4mm thick with non woven polyster reinforcement weighing not less than 4.00 Kg/ Sqm applied by torch application method. (d) Apply a coat of blown type bitumen grade 85/25 heated to working temperature of 180 degree centigrade and applied at 1.20 Kg/sqm of the surface area. (e) Apply a coat of solar reflective bituminous aluminium paint @ 0.10 Kg/Sqm. |
| 75 | M&L for Machine pressed precast concrete interlocking paver block having glossy finish shape,size and color as approved by GE confirming to IS 15658-2006 of 60mm thickness, M-35 Grade of with grey cement and pigments laid over and including 50 mm thick dry sand cushioning and voids filled with dry and surface compact, including compaction by means of surface vibrator, including dismantling of old paver block complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 21, 2026
11:30 IST
Tender Published
Tender notice published.
TodayDec 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysDec 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender