Tender For Special Repairs To Bldg No. Wl-01 (Old Main Office) At Dsc Centre Kannur Under Ge (Army) Trivandrum
Tender Value
45.24 Lakhs
Estimated cost
Bid Submission
08 Dec 2026
17 days left
EMD
90500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kannur → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Bldg No. Wl-01 (Old Main Office) At Dsc Centre Kannur Under Ge (Army) Trivandrum
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of Mangalore pattern roofing tiles with ceiling tiles or slate roofing complete all as specified and directed. |
| 2 | M&L for roof tiles, Mangalore pattern, interlocking at side joints, laid dry complete all as specified and directed. |
| 3 | M&L for ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in lime mortar 1:3 or cement mortar 1:6 complete all as specified and directed. |
| 4 | Laying only roof tiles, Mangalore pattern, interlocking at side joints, laid dry including ceiling tiles complete all as specified and directed.Note: Dismantled tiles obtained under item No. 1 above shall be reused. |
| 5 | Dismantling of Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings including ridge complete all as specified and directed. |
| 6 | Dismantling of battens for tiles, shingles etc. of any size including tilting fillets exceeding 15 cm spacing complete all as specified and directed. |
| 7 | Dismantling of timber scantlings 40 sqcm and over in section, in unframed work, in any position complete all as specified and directed. |
| 8 | M&L for second class hardwood scantling, clean sawn, framed and fixed, as in rafters, purlins etc. complete all as specified and directed. |
| 9 | M&L for preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with two coats of creosote oil complete all as specified and directed. |
| 10 | S&F rolled mild steel roof trusses, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. confirming to IS 1161:1979 Grade St-240/ Fe-410-W (Gde-E-250) quality-B complete all as specified and directed. |
| 11 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated/ profiled steel sheet 0.50 mm thick colour coated having tensile strength of 550 Mpa as in roofing/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 12 | S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick colour coated having tensile strength of 550 Mpa as in roofing, ridges, valley gutters, fixed with self tapping screws complete all as specified and directed. |
| 13 | M&L for preparation of new or previously untreated steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and directed. |
| 14 | S&F MS flat iron 50 x 6 mm as in wind ties including necessary drilling etc. complete all as specified and directed. |
| 15 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including grid work/ wooden or aluminium frame work, cover fillets etc. complete all as specified and directed. |
| 16 | S&F anodised aluminium snap grid frame work (size of grid 605 x 605 mm) including hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long for false ceiling complete all as specified and directed. |
| 17 | M&L for 4 mm thick non-asbestos fibre cement building boards fixed or laid/ inserted to timber/ GI/ aluminium framework with screws in ceiling, flat or sloping complete all as specified and directed. |
| 18 | M&L for preparation of new surfaces of ceiling and applying two coats of oil bound distemper; over a coat of chalk whiting complete all as specified and as directed. |
| 19 | M&L for complete removal of existing treatment on surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying 2mm thick wall care putty for making the surface smooth and two coats of distemper oil emulsion (to be applied by approved applicator of manufacturer of paint) over a coat of wall primer (water thinnable/ solvent thinnable) complete all as specified and directed. |
| 20 | M&L for complete removal of existing treatment on surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying 1mm thick external wall care putty and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali and fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied at the rate of 0.90 litre/ 10 sqm complete all as specified and directed. |
| 21 | Taking down cement or cement lime plaster any description, on brick/ concrete/ stone walls/ jambs/ cills etc. including raking out joints, hacking for key, scrubbing down with water etc. and removing rubbish outside MD land complete all as specified and as directed. |
| 22 | M&L for 15 mm thick rendering in two layers (10mm + 5mm) in cement mortar (1:4) on fair faces of brick work or concrete surfaces of wall and finishing the surface even and smooth without using extra cement complete all as specified and directed. . |
| 23 | M&L for rendering 10 mm thick in cement mortar 1:6 on fair faces of brick work/ concrete wall surfaces, finished even and smooth without using extra cement complete all as specified and directed. |
| 24 | M&L for preparation of newly plastered surfaces and applying two coats of superior quality anti-algae weather proof acrylic paint exterior grade on external surfaces over a coat of primer complete all as specified and directed. |
| 25 | M&L for preparation of newly plastered surfaces of wall and providing and applying wall care putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and applying two coats of distemper oil emulsion white or coloured by auto roller over a coat of chalk whiting on plastered surfaces preparatory to distempering complete all as specified and directed complete all as specified and directed. |
| 26 | Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 27 | M&L for cement concrete 75 mm thick, type C-2, 1:3:6, using 40 mm graded stone aggregate, as in plinth protection and pavings, finished even and smooth without using extra cement including necessary formwork to edges complete all as specified and directed. |
| 28 | Taking down and refixing in the same opening, shutters of any description not exceeding 1 sqm each after carrying out necessary repairs, easing and adjusting including refixing builders hardware as required including renewal of unserviceable screws, etc. complete all as specified and directed. |
| 29 | Taking down and refixing in the same opening, door shutters of any description exceeding 1 sqm but not exceeding 2 sqm each after carrying out necessary repairs, easing and adjusting including refixing builders hardware as required including renewal of unserviceable screws, etc. complete all as specified and directed. |
| 30 | S&F in repairs aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and directed. |
| 31 | M&L for preparing old surfaces of wood and wood based materials, of any description and exceeding 10 cm in width or girth, and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 32 | Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. and making good disturbed surfaces of walls, floors, etc. complete all specified and directed. |
| 33 | Taking down old and unserviceable distribution board any type including sheet metal enclosures, after removing all connections and making good the disturbed surface complete all specified and directed. Please Enable Macros to View BoQ information |
| 34 | Taking down old and unserviceable distribution board any type including sheet metal enclosures, after removing all connections and making good the disturbed surface complete all specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 21, 2026
11:30 IST
Tender Published
Tender notice published.
TodayDec 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysDec 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender