Tender For special Repair Of Perimeter Road At Fcab, Nams
Tender Value
44.70 Lakhs
Estimated cost
Bid Submission
12 Dec 2026
21 days left
EMD
89400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Amritsar → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair Of Perimeter Road At Fcab, Nams
BOQ
| Sl. No. | Item Description |
| 1 | Scarifying or picking gravelled macadam or bituminous macadam surfaces in area exc 400 Sqm depth complete, all as specified and directed.Note: Scarification depth may extend upto 200mm in areas where WBM is to be redone. |
| 2 | Material and labour for Repair to pot holes any depth, n.exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc cutting around edges at least 30 mm in depth and making good by applying tack coat with bituminous primer @ 5Kg per 10 Sqm, putting in premixed bituminous macadam using bitumen @4%of weight of road metal, well rammed and sealed with binder @9.8kg/Sqm, binded with 0.09 cum of stone chipping 6.3mm size and again well rammed to uniform surfaces, depth of pot hole exc 30mm complete all as specified and directed. |
| 3 | Material and labour for preparing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with air compressor to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer @ 5kg per 10 Sqm (VG-10) and laying bituminous Premixed semi dense asphaltic concrete 30mm thick (minimum consolidated thickness) with 5.5% (paving bitumen VG-30) binder content by weight of total mix, rolled and compacted with 8 to 10 Tonne power road roller to required gradient and camber complete, all as specified and directed.NOTE:1. Job mix formula shall be carried out by IIT/NIT/Govt College or any other institute as approved by the accepting officer.2. Final approval of design mix shall rest with accepting officer. GE shall submit case for approval after examining all reports.3. Gradation of aggregate shall be strictly as per SSR Pt-I,4. Binder content is indicative only. Difference in same shall be dealt as per SSR Pt-I specifications.5. The SDAC shall be laid by sensor paver. |
| 4 | Material and labour Premixed bituminous, macadam laid/rolled and compacted to required gradient and camber paving bitumen (VG-30) @ 4% by the weight of total mix (consolidated thickness 75mm thick or less or as required) with 10 to 12 ton power roller complete, all as specified and directed.NOTE:1. Job mix formula shall be carried out by IIT/NIT/Govt College or any other institute as approved by the accepting officer.2. Final approval of design mix shall rest with accepting officer. GE shall submit case for approval after examining all reports.3. Gradation of aggregate shall be strictly as per SSR Pt-I.4. Binder content is indicative only. Difference in same shall be dealt as per SSR Pt-I specifications. |
| 5 | Material and labour Premixed bituminous, macadam laid/rolled and compacted to required gradient and camber paving bitumen (VG-30) @ 4% by the weight of total mix (consolidated more than thickness 75mm or as required) with 10 to 12 ton power roller complete, all as specified and directed.NOTE:1. Job mix formula shall be carried out by IIT/NIT/Govt College or any other institute as approved by the accepting officer.2. Final approval of design mix shall rest with accepting officer. GE shall submit case for approval after examining all reports.3. Gradation of aggregate shall be strictly as per SSR Pt-I.4. Binder content is indicative only. Difference in same shall be dealt as per SSR Pt-I specifications. |
| 6 | Material and labour for 7.50 cm thick (Compacted thickness) WBM with coarse aggregate of (Granite, trap or basalt stone) of grading-2 (63 to 40mm) or of grading 3 (50 to 20mm size) spread, rolled and consolidated to gradient and camber with 8 to 10 Tonne power road roller complete, all as specified and directed. |
| 7 | Supply and fixing solar reflective cat eyes of alloy metal body, size 100mm x 100mm x 20mm, with PMMA strip lens reflector of model No. DA 972.0, fixed with and including MS stud of suitable size as per manufacturer's instructions. complete, all as specified and directed. |
| 8 | Supply and fix solar cat eye aluminum alloy shell (100% water proofing design according to IP65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Monocrystalline solar panel 2.4V/0.3 watt one Ni-MH rechargeable battery (1.2V/1600mAh) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufacturer's instructions etc. complete, all as specified and directed.Make: DA-110 of Darkeye or equivalent from list of makes |
| 9 | Material and Labour for preparation of bituminous surfaces of roads and marking 2.5mm thick centre line, stop lines dashes, arrows etc and the like n exc 10cm wide on roads pavements, with hot applied thermo plastic road marking paint of approved colour conforming to BS 3262-1989 with special applicator machine all as per manufacturer's instruction complete, all as specified and directed. |
| 10 | Material and labour continuous brick edging using Subclass 'B' Bricks with width equal to the length of the brick; laid dry on edge vertically complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 21, 2026
11:30 IST
Tender Published
Tender notice published.
TodayDec 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysDec 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 28 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender