Defence Statutory Bodies & Commissions/Committees Closing in 19 days TDR #58655563

Tender For Day To Day Complaints And Welcome Maintenance And Certain B/R Repairs In Sasoon Complex, Harbour Height, Talwar Camp And Certain Other Locations Under Age B/R Ll Of Ge (Nw) Nofra.

Issued by Statutory Bodies & Commissions/Committees · Mumbai, Maharashtra
Tender Value
49.50 Lakhs
Estimated cost
Bid Submission
10 Dec 2026
19 days left
EMD
99000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai → Maharashtra
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Day To Day Complaints And Welcome Maintenance And Certain B/R Repairs In Sasoon Complex, Harbour Height, Talwar Camp And Certain Other Locations Under Age B/R Ll Of Ge (Nw) Nofra.

BOQ

Name of Work:- DAY TO DAY COMPLAINTS AND WELCOME MAINT AND CERTAIN B/R REPAIRS IN SASOON COMPLEX, HARBOUR HEIGHT, TALWAR CAMP AND CERTAIN OTHER LOCATIONS UNDER AGE B/R ll OF GE (NW) NOFRA.
Sl. No. Item Description
1M&L complete removal of existing treatment, preparation of old plastered surfaces of wall and applying two coats of oil emlusion distemper over a coat alkali primer over 2mm thick white cement based wall care putty on the existing surface and including necessary scaffolding upto any height, complete all as specified and as directed by Engineer-in-Charge. (Note: Rates deemed to be inclusive of necessary cleaning of floors, glass & furniture affected during painting)
2Material & Labour for preparing old plastered / decorated surface of wall including cornices etc by brooming down and applying two coat of oil bound distemper with smooth roller finish ,complete all as specified and directed by Engineer in Charge. (Note: Rates deemed to be inclusive of necessary cleaning of floors, glass & furniture affected during painting)
3Material & Labour for preparing old plastered / decorated surface of wall including cornices etc by brooming down and applying one coat of oil bound distemper with smooth roller finish ,complete all as specified and directed by Engineer in Charge. (Note: Rates deemed to be inclusive of necessary cleaning of floors, glass & furniture affected during painting)
4Material & Labour for preparing old plastered / decorated surface of ceiling including cornices etc by brooming down and applying two coat of oil bound distemper with smooth roller finish ,complete all as specified and directed by Engineer in Charge. (Note: Rates deemed to be inclusive of necessary cleaning of floors, glass & furniture affected during painting)
5Material & Labour for preparing old plastered / decorated surface of Ceiling including cornices etc by brooming down and applying one coat of oil bound distemper with smooth roller finish ,complete all as specified and directed by Engineer in Charge. (Note: Rates deemed to be inclusive of necessary cleaning of floors, glass & furniture affected during painting )
6M&L Preparation of old painted wood or wood based surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint with smooth roller finish etc complete all as specified and directed by Engeer- in charge.
7M&L Preparation of old painted steel based surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint with smooth roller finish etc complete all as specified and directed by Engeer- in charge.
8Taking down cement plaster on brick wall including raking out joints, hacking for key, scrubbing down with water, etc.
9M&L for rendering 15mm thick CM 1:6 on fair face of brick work or concrete surfaces of walls and finised surfaces even and smooth without using extra cement.
10M&L rendering 10 mm thick cement plastering on brick or concrete surfaces in CM (1:4) finished even and smooth without using extra cement all as specified and directed, as in ceiling.
11M&L for preparation of newly plastered surfaces of wall and applying two coats of oil emlusion distemper white or tinted over a coat alkali resistant priming paint over 3mm thick wall care putty on wall complete all as specified and as directed .
12M&L for preparation of newly plastered surfaces of ceiling and applying two coats of oil emlusion distemper white or tinted over a coat alkali resistant priming paint over 3mm thick wall care putty on wall complete all as specified and as directed .
13M&L for Preparation of existing mosaic cement tiles flooring and polishing with machine/hand to surface and pointing of joints to match the colour complete all as specified.
14Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
15M&L for non-skid coloured ceramic tiles 7-8mm thick (square/rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11Sqm in floors etc , set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed (1:6), complete all as specified and directed.
16M&L for Coloured glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick , set and jointed in neat cement paste and pointed in coloured cement to match the shade of the tiles including 10 mm thick backing coat in CM 1:3 complete all as specified and directed.
17M&L for vitrified ceramic tiles 10 mm thick (square /rectangular ) polished dark shade, area of each tiles not exceeding 0.36 sqm, in floor etc. set and jointed in neat cement slurry and pointed white or coloured cement to match the dark shade of the tiles including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.
18Ditto- as per item No. 17 here-in-before but as in skirting including 10mm thick rendering in CM. 1:4 as backing coat etc complete all as specified and directed.
19Dismantling of stone slabs and tiles of any descriptionn or thickness kin floors, aprons etc.
20M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, including nosing, polishing and rounding at edges etc, complete all as specified and directed by engineer in charge.
21M&L for mirror polished machine cut kota stone slab flooring 20-25mm thick over cement screed bed in CM (1:6) 15mm thick, & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed.
22Dismantling wrought iron or mild steel works of any description.
23S&F rolled mild steel sections Joist, channel, angle, or tee sections Fe 410 -W (Gde-E- 250) quality-A, fixed independently,for loft tank support, without connecting plates, etc (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified and as directed.
24S&F mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290, Gde-E-165.
25M&L for Preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of primer complete all as specified and directed by Engeer- in charge.
26Hacking out old broken glass (any thickness, size) from wooden/aluminium frames glazed with putty or fixed with beads.
27S&F 4.00 mm thick sheet glass ordinary quality and glazing with oil putty fixed with beads in each pane complete all as specified and as directed.
28S&F 3mm thick one side ground or obscured or frosted glass sheet ordinary quality and glazing with oil putty/ wooden beading n.exc 0.5Sqm in each pane complete all as specified and directed.
29Resecuring or easing & adjusting without taking down shutters of any description exc 1 sqm and n.exc 2 sqm each.
30S&F in repair stainless steel butt hinges medium weight of size 100mm complete all as specified and directed.
31S&F in repair Aluminium alloy anodised barrel tower bolt 200mm long complete all as specified and directed.
32S&F in repair extruded aluminium alloy handle fabricated type anodized 150mm long complete all as specified and directed.
33S&F in repair 300mm size aluminum sliding door bolt with hasp and staple complete all as specified and directed.
34S&F in repair 150 mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring complete all as specified and directed.
35S&F in repair aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples all as specified and directed.
36S&F in repair Brass mortice night latch 4 levers, vertical type, 100mm size include for escutcheon plates and two keys suitable for doors complete all as specified and directed.
37S&F in repair 18/19 mm thick prelaminated partical boad interior grade prelaminated both side with decorative choice lamination & fixed with screws to timber frame work including 6 mm thick teak wood beading all around complete all as specified and directed.
38S&F in repair 12 mm thick prelaminated partical boad interior grade prelaminated both side with decorative choice lamination & fixed with screws to timber frame work including 6 mm thick teak wood beading all around complete all as specified and directed.
39Taking down shutters of any description exc 1 sqm and n exc 2 sqm each.
40S&F 35mm thick IInd class hard wood factory made glazed and skelton shutters open rebated and prepared to receive gauge/glass cut and metered beads and divided into square with plain chamfered or rounded metered and rebated sash bars any numbers size of members of shutters for doors, windows and ventilator as specified.
41S&F 35mm thick second class hard wood factory made plain framed panelled shutters (two panels) with 12mm thick commercial ply wood. The size of rail shall be as per IS 1003 (Part-I) kiln seasoned and chemically pressure treated all as specified and directed.
42S&F aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples all as specified and directed.
43S&F Aluminum alloy anodized sliding door bolt 250mm long with hasp and staple (bolt type) and fixing bolts and sliding bolts of extruded such or cast aluminum alloy complete all as specified and as directed
44S&F 100mm stainless steel butt hinges medium weight fixed with Stainless Steel Screws.
45S&F Aluminium alloy anodised barrel tower bolt 150mm long complete all as specified and as directed
46S&F extruded aluminium alloy handle fabricated type anodized 150mm long complete all as specified and as directed
47Taking down chowkhat or frame exc 1.5 Sqm but not exc 4 Sqm each without taking off shutter of any discription complete all as specified and as directed.
48S&F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints.
49S&F mild steel hold fasts, wall ties and similar small articles conforming to Fe 410-0 or Fe310-0.
50M&L for plain cement concrete 1:3:6 type C1, (using 20mm graded stone aggregate) for fixing hold fasts complete all as specified and directed.
51M&L for preparation of new wooden surfaces of any description exc 10cm in width or girth and applying two coat of synthetic enamel paint over one coat of primer.
52S&F in repair 20mm dia aluminium decorative type powder coated curtain rod or similar articles complete all as specified and as directed.
53S&F in repair aluminium decorative type powder coated brackets suitable for 20mm dia curtain rod or similar articles complete all as specified and as directed.
54S&F in repair Telescopic channels,power coated with ball bearings,suitable for sliding SS kitchen bracket 60 cm long standard width,fixed over 2nd class hard Wood rectangular fillet sectional area exc 3 & n exc 6 sqcm, clean swan secured with screws and the fillets fixed on cuddapah stone with screws ,all as specified and directed.
55S&F in repair wash hand basin vitreous china white flat back or angle type of size 580mmx450mm including waste chain and plug and porcelain stopper, a pair of brackets or errecting stand and etc. complete all as specified and directed.
56S&F in repair white vitreous china wash down water closet pan (pedestal pattern) including fixing bolt and plastic water closet seat cover closed pattern with flat bottom and cover and MSCP aluminum hinges device complete connecting to P or S trap all as specified and directed.
57S&F in repair vitrous china squatting pan 'Orrisa Pattern' size 580x440mm white with integral foot rest including connecting and necessary provision of lime concret complete all as specified and directed by Engr-in-Charge
58S&F in repair PVC low level flushing cistern including brackets 10 litre capacity , with inlet ball valve float, handle,flush pipe etc. complete.
59S&F in repair plastic water closet seat covers standered closed pattern with flat bottom and cover and MS chromium plated or aluminised hinging device complete all as specified and directed.
60S&F in repair 15mm pillar taps, cast copper alloy with captain heads chromium plated, fancy type screw down high pressure with long screwed for iron pipe all as directed.
61S&F in repair Toilet paper holder along with cover of stainless steel suitable for 120mm width and 100mm depth long paper fixed to walls sample as per approved by GE
62S&F in repair Stainless Steel Soap Dish of approved Make fancy type fixed with two Steel/ CP Screws complete all as specified and directed
63S&F in repair Kitchen sink with drainage board made of stainless steel 1mm thick with plugs washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe etc Complete all as specified and as directed.
64S&F in repair stainless steel grating cover 100mm dia complete all as specified and directed.
65S&F in repair PVC cabinet with openable shutter and mirror with size of 450mm x 350mm x 120mm with thickness of mirror not less than 2mm, fixed to wall complete al as directed.
66S&F in repair decorative glass corner shelf round 10mm thick, 300mm size with stainless steel railing, fixed with D type stainless steel bracket on wall of approved design and pattern all as specified.
67S&F in repair tubular towel rail brass chromium plated 20mm dia D type 60cm long between flanges including a pair of brackets complete all as specified and directed.
68S&F in repair 32/38 mm dia WHB/urinal /Sink flexible waste pipe all as specified and directed.
69S&F in repair 32mm bore of dia discharge pipe Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms) for wash hand basins complete all as specified and as directed.
70S&F in repair 40mm bore of dia discharge pipe Waste coupling of PTMT (half or full threaded) (Minimum weight 40mm-60gms) for kitechen sink complete all as specified and as directed.
71S&F in repair (600mm x 450mm) 6mm thick selected quality mirror in decorative form fixed with 4 Nos stainless steel screws all as specified and directed.
72Taking up or down steel tubing and connections and removal to store of 20mm bore, complete all as directed.
73Taking up or down steel tubing and connections and removal to store of 15mm bore, complete all as directed.
74Supply and fix Steel water tubing 20mm bore galvanised medium grade (ISI marked) , with all fittings fixed complete to walls and ceiling or laid in floor/wall/ ceiling opened or concealed (including scaffolding) complete all as specified and directed.
75Supply and fix Steel water tubing 15mm bore galvanised medium grade (ISI marked), with all fittings fixed complete to walls and ceiling or laid in floor/wall/ ceiling opened or concealed (including scaffolding) complete all as specified and directed.
76S&F 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings , concealed/opened on walls/ceiling or laying in floors, including taking down existing water tubing complete all as specified.
77S&F in repair hot water extension pipe made out of copper chromium plated 450 mm long with brass adaptor and fixing in position complete all as directed.
78S&F in repair PVC connections 15 mm size with PTMT nuts of length 600mm with brass adapters, washers etc complete all as directed.
79S&F in repair white rectangular PVC water storage tanks (Loft tank) of capacity 300 Ltrs with complete fitting including fixing 03 Nos tank nipples of GI with washer for outlet and inlet all as per manufacturers instructions including disconnecting service connections/over flow pipes and removing old tank complete all as specified and directed.
80S&F in repair white rectangular PVC water storage tanks (Loft tank) of capacity 150 Ltrs with complete fitting including fixing 03 Nos tank nipples of GI with washer for outlet and inlet all as per manufacturers instructions including disconnecting service connections/over flow pipes and removing old tank complete all as specified and directed.
81S&F in repair PVC modular 20mm thick as in proflie including 'C' channels, aluminium U clip all around the profile suitable for 300 ltr/150 ltr capacity loft tank ,complete all as specified and directed.
82S&F in repair 15 mm bore brass float valve, high pressure with polythene float & fly nut complete, screwed for GI pipe of following sizes including necessary GI fittings complete all as specified.
83S&F in repair 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed with suitable fittings fixed new line and in position complete all as specified .
84S&F in repair bib tap 15 mm dia ,CP cast copper alloy chromium plated with crutch or butterfly handle screwed down for iron pipe or for brass ferrule all as directed
85S&F in repair Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe all as per approved by GE.
86S&F in repair Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed
87S&F in repair fancy type chromium plated brass angular stop cock suitable for 15mm bore GI tubing, with necessary fittings complete all as specified and directed
88S&F in repair open Stop valves 15mm bore dia of pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.
89S&F in repair in fancy concealed type stop valve with long shark and adjustable wall flange including union suitable for 15mm bore GI/upvc pipe complete all as specified and directed.
90S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all as specified.
91S&F in repair stainless steel plate rack of size 900 x 580 x210 mm fixed to wall with screws complete all as specified and directed.
92Cleaning of loft tank of upto 300 ltrs capacity (in existing position or disconnecting existing tanks for cleaing and refix in same position incl fixing of all attached fittings) by removing out the residual water from the tank, removing dirt, cleaning the internal surfaces of the tank with high pressure controlled water jet pump by using different nozzles as per requirement. After sucking out entire moss and algae by wet vaccume pump, wash the tank with clean drinking water tank cleaning solution on all internal surfaces, then cleaning the bottom surface of the tank with vaccume pump to make it dry and providing sticker showing the date of cleaning, complete all as specified and directed.
93Repairing of minor complaints of joinery such as wooden/steel/aluminium of any description including pelmet box, cupboard ,drawers, door springs, rolling shutters etc requiring carpentry work like adjusting easing, wrought, cutting, pinning, wedging and finally making good etc and functioning to seating over with each other with tightening of screws/nails , door, springs etc and fixing of tower bolt, sliding door bolt, plate rack, handles of any size incl rawl plug & screws,and including petty repairs material like screws/nails, plug, grease etc to make it functional as in day to day maintenance work, complete all as specified.
94Repairing of minor complaints of plumbing and sanitary fittings including water leakage from taps, EWC”s, flushing cistern, urinals, wash basins, bottle traps etc and any obstruction to water supply in rooms/Qtrs, requiring plumber work with minor stores such as replacement of Brass spindle, M seal, Screws ,nail , washers, check nuts, tightening of fittings of flushing cistern, cleaning of bottle traps etc to make it functional and stop leakage of any type of plumbing and sanitary items as in day to day maintenance work and fixing of new sanitary fittings (as bib taps, pillar taps, stop cockes, Seat cover, jet spray, cistern, mirror cabinet etc), complete all as specified. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58655563
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 49.50 Lakhs
LAST DATE 10-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Day To Day Complaints And Welcome Maintenance And Certain B/R Repairs In Sasoon Complex, Harbour Height, Talwar Camp And Certain Other Locations Under Age B/R Ll Of Ge (Nw) Nofra.
Basic Detail
Tender No GE (NW) NOFRA 8609
Bidding Type Tender
Location
City Mumbai
State Maharashtra
Key Dates
Publish Date 21 Nov 2026
Submission Date 10 Dec 2026
Open Date 12 Dec 2026
Finance
Tender Value 49.50 Lakhs
Tender Fee 500
EMD 99000
Exemption Available
Document List
43a1de67-3e14-452a-916d-f041b2830780.html
BOQ_897387.xls
Tendernotice_1.pdf
tenderpages8609.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 21, 2026
11:30 IST

Tender Published

Tender notice published.

Today
Dec 10, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 19 days
Dec 12, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 21 days

Tender Documents

Download All (ZIP) ↓
html

43a1de67-3e14-452a-916d-f041b2830780.html

xls

BOQ_897387.xls

pdf

Tendernotice_1.pdf

pdf

tenderpages8609.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender