Public Administrative Department Local Bodies Closing in 8 days TDR #58653335

Tender For Supply, Installation, Testing & Commissioning Of Fire Fighting Wet Riser, Pumping Unit, Fire Alarm System, Pa System, Fire Extinguishers & Evacuation Sinages Of Manorama Market Complex (S + 3 Floors) At Dhenkanal, Odisha.

Issued by Local Bodies · Dhenkanal, Odisha
Tender Value
Ref. Documents
Estimated cost
Bid Submission
30 Nov 2026
8 days left
EMD
23962
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Dhenkanal → Odisha
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Supply, Installation, Testing & Commissioning Of Fire Fighting Wet Riser, Pumping Unit, Fire Alarm System, Pa System, Fire Extinguishers & Evacuation Sinages Of Manorama Market Complex (S + 3 Floors) At Dhenkanal, Odisha.

BOQ

Name of Work:- Supply, Installation, Testing & Commissioning of Fire Fighting Wet Riser, Pumping Unit, Fire Alarm System, PA System, Fire Extinguishers & Evacuation Sinages of Manorama Market Complex (S + 3 Floors) at Dhenkanal, Odisha.
Sl. No. Item Description
1Supply , Erection, Testing & commissioning of Electrical Motor Driven Pump centrifugal end suction type pump complete with bronze impler mechanical seal capable of delivering 1620 leters/minute against a total head of 56 meters, 50 HP induction motor suitable for 415V 50 Hz AC supply with speed 2900 RPM TEFC type confrming to IP 55 above coupling coupling guard common bedplate fabricated from mild steel channel vibration pads isolation arrangement & RCC foundation.
2Supply ,Erection, Testing & commissioning of Diesel Engine Driven Pump Horiozontal end section centnfugal type pump complete with bronze impller mechanical seal capable of delivering 1620 liters/minute against a total head of 56 meters, 56 HP. Diesel Engine Min Cap of suitable BHP with speed of 2100 RPM fiexble coupling coupling guard Common bed plate fabricated from mild steel channel starter motor , batteries , battery charger & cabling fuel piping instrumental panel, exhaust piping with residential type silencer. cooling arrangements including 100 Liters Diesel Tank Complete. vibration pads isolation arragement heat exchanger & RCC foundation.
3Supply ,Erection, Testing & commissioning of Jockey Pump Horizontal end section single state cetrifugal type pump complete with bronze impller, mechanical seal capable of delivering 180 liters/minute against a total head 56 metres. induction motor suitable for 415 V 50Hz with 2900 RPM, TEFC type conforming to IP 55. flexible coupling , coupling guard Common bedplate fabricated from mild steel channel, vibration pads isolation arrangement & RCC foundation.
4Fabricating & Supply, installing, testing and commissioning of compartmentalised commom control panel for Electrical motor driven pumps and Diesel engine driven pumps, All the componets shall be housed in a common cubical made of 16 SWG. M. S sheet with required stiffners ( if required). The panel shall be powder coated of approved colour both inside & out side. he panel shall have both botton & to cable entry provision and panel shall be mounted on Pedestal of 300 mm height
5Supply, Installation, Testing and commissioning of monoblock pump of capacity 450 LPM / Min and 35 Mtr head with required KW motor arranged on MS baseframe. The pump should be supplied along with the start/stop DOL switch. Necessary fittings / fixturers required to make the system in auto operation should be considered with this MAKE-LUBI
6Control Panel for Fire pumps.Providing and fixing dust and vermin proof motor control panel fabricated from 14 SWG MS Sheet with stove enamel paint and comprising of (for Fire Booster pump automatic operated.)
71100 V GRADE POWER / CONTROL CABLES Supply, Laying testing & commissioning of FRLS PVC outer sheateh steel armoured aluminium / copper conductor 1100 V grade power cables with glands etc. The cables shall be laid in tray / Hume pipe / in treanchs / on walls floor etc. as required for cables laid out door the rate shall include earth escavation providing brick and sand protection. refilluing and compacting the eath , the rate shall excluding tray & hume pipes the minimum size to the cables shall as mentioned below.
83.5C X 50 sq mm for main pumps
93.5 C X 16 Sqmm Jockey pumps
1012 C X 2.5 Sqmm Diesel engines
112 C X 1.5 Sqmm for instrumentation
123 C x 6 Sqmm For start / stop push bottons
13CABLE TRAYSupplying and fixing of perforated G.I. sheet cable tray with necessory angle iron suspension supports. Anchor fastners etc. complete maximum height of suspension shall not exceed 500 mm size of the tray shall be suitable for laying the above mentioned cables.
14G.I Earthing strip of 50 mm x 6mm thick. Strip shall be run on floor / celing / walls, from the equipment to the nearst Earth pit with necessory accessories as required (This shall be executed by other agencies)
15Supply, installation, testing & commissioning of of 100 mm dia, dial type, Pressure Gauge of range 0 - 16 Kg with gi fittings etc. Make- H-GURU
16Supply, installation, testing & Commissioning of Pressure Switches diffrential type for automation of fire pumps. Pressure Switches Make- INDIFOSS / DANFOSS
17Supplying, installing, testing and commissioning of C. I. waffer type DP Non-return valves ( PN-16) swing check type with required flanges, nuts, bolts and gaskets etc. complete,
18100mm nominal dia
1980mm nominal dia
20KARTAR / DRP / SANTSupplying, installing, testing & commissioning of C.I. BUTTERFLY VALVE as per BS 5155 slim seal standard lever operated type with required flanges,nuts, bolts etc. complete
21150mm nominal dia
22100mm nominal dia
2380mm nominal dia
2450mm nominal dia
25Supplying, Installing, and commissioning C. I. flanged Y TYPE STAINER with SS mesh, suitable flanges, nuts, bolts, gaskets etc. complete
26150mm dia
27100 MM Dia
28KARTAR / DRP / SANTSupplyig, installing, testing and commissioning of Gun metal chrome finished Ball valve with fittings of screwd end type
2925mm nominal dia
3015mm nominal dia
31Supply, fixing, testing and commissioning of air vessel tank shall be fabricated out of 200 mm dia MS pipe to 2000 mm long complete with 25 mm inlet, 25mm drain, 25 mm dia connection for air release valve including legs, painting with red oxide primer and finished with fire red enamel panint shall be inclusive of all relevent pipes, valves , specials upto pump header and other acessories etc.
32B. Wet Riser SystemProviding all materials, labour, T&P for laying of following dia M.S. heavy grade class C pipes conforming to IS:1239/IS:3589 with ISI mark & required sizes of fitting like off set, bend, tee, reducer, flange & flange joints etc. as per site condition including gas cutting by oxygen and acetelene gas flame, fitting and setting as per required size wherever necessary, jointing the pipes by electric welding confirming to( IS specification and electrodes confirming to IS specification after 'V' grove cutting. supporting/fixing the pipe on floor / wall /ceiling with clamps, hangers (using anchor fasteners) or angle iron, G.I. pipe sleeve of suitable higher size shall be provided including cutting holes and chases in brick/RCC wall/roof/chajja and making good the same to original condition. All hangers, clamps, brackets etc. shall be of galvanized iron unless specified otherwise and then supply of the same shall also be included. Painting 2 (two) or more coats with synthetic enamel paint of Signal red shade over a coat of zinc primer for above ground level. Prior to application of primer the surface should be cleaned for any dirt, rusts, rough substance etc. Including painting of legends both direction arrow as per the approved specification including testing & commissioning the system.The cost inclusive of hire and running charges of welding generator set transportation, hire & running charges of machineries, POL, to & fro charges with all consumables for all floors etc. allcomplete as per specification & direction of EIC. Make:-JINDAL,TATA,APOLLO4
33100 mm dia (Heavy class) as per IS- 1239 (Part-I) 2004
3480 mm dia (Heavy class) as per IS- 1239 (Part-I) 2004
3525 mm dia (Heavy class) as per IS- 1239 (Part-I) 2004
36Supply, installation, testing and Commissioning of 63mm Dia. Oblique type single headed SS Hydrant valve with female type instantaneous coupling including rubber gasket, nuts, bolts,washers etc. with matching flanges as per IS 5290 and as per specifications. MAKE-:ARMOR/SAFEX/KARTAR Single Landing Valve (oblique type)
37Supplying and Fixing 63 mm dia instantaneous pattern branch short SS 304,20 mm dia nozzle conforming to IS 903, suitable for inter connection to hose pipe coupling complete as required. MAKE-:ARMOR/SAFEX/KARTAR
38Providing and fixing lockable cabinet of size not less than 0.8 x 0.6 x 0.25 mtr made out of FIBRE GLASS MATERIAL and ISO-TALLIC RESINS of min 2mm thickness having central opening and with glass in doors embedded in EPDM (Two nos.) suitably marked on the outside with the letters \\"FIRE HOSE\\" including necessary locking arrangement and shall be red in colour. MAKE-: ARMOR/SAFEX/KARTAR
39Supplying & fixing non-percolating RRL fire hose pipe of Type B(as per IS : 636) of 63 mm dia and length as described below. The hose shall be rated for brust pressure of 42 Kg/sqcm. Hose shall be complete with ISI marked SS 304 male & female coupling (IS:903) bound & rivetted to hose pipe with copper rivets & 1.06 mm copper wire. MAKE-: ARMOR/SAFEX/KARTAR
40Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. MAKE-: ARMOR/SAFEX/KARTAR
41Providing, fitting & fixing of following size Ductile Iron double flanged slim seal wafer type Butterfly valves with EPDM rubber lined with lever operated as per IS-13095 with ISI mark of pressure ratting PN-1.60 including fixing the same with supply of required jointing materials like rubber insertion, MS nuts & bolts, paint etc. and testing the joints with required water pressure for all floors etc. all complete as per specification & direction of E.I.C. Make-KIRLOSKAR/ VAG/ AUDCO/KARTAR
42150 mm dia
43100 mm dia
4480 mm dia
45Provinding fixing testing and commissioning of 25 mm CI Single Air Relief Valve with stop cocok confirming to IS: 14845/2000 with ISI mark for water works purpose including fixing the same with hydrant riser including testing * commissioning the system etc. all complete as per approved specification & direction of EIC Make-ZOLOTO/KARTAR / DRP
46Supplying, installing and commissioning of Fire brigade inlet inlet connection of 4 WAY with 4 nos 63 mm dia built-in SS Non-return valves instaneous coipling type arranged on 150 mm dia pipe complete in all respect, Make- KARTAR
47C. CONVENTIONAL FIRE DETECTION AND ALARM SYSTEMSupplying installation testing and commissioning of Six zone Conventional type display digital panel suitable for wall / floor mounted microprocessor based incorporating visual indication for each zone fitted with 24V Sm battery with battery charger including testing & commissioning the system etc.all complete as per approved specification & direction of EIC. Make- HONEYWELL/ RAVEL
48Supplying installation testing and commissioning of stylish low profile design conventional Photo electric Smoke Detector, including testing & commissioning the system etc. all completed as per approved specification & direction of EIC Make- HONEYWELL/ RAVEL.
49Supplying installation testing and commissioning of Conventional Call Point mounted on wall/ceiling, including testing & commissioning the system etc. all completed as per approved specification & direction of EIC Make- RAVEL / QTAC
50Supplying installation testing and commissioning of Conventional Hooter of capacity 90 DB as per IS specification mounted on wall/ceiling, including testing & commissioning the system etc. all completed as per approved specification & direction of EIC Make- RAVEL / HONEY WELL / SYSTEM SENSOR
51Providing and laying of a pair of 1.5 sq.mm single core flexible copper cable (2X 1.5) to be laid within Existing PVC conduit of suitable size to be erected above the wall or concealed, as the case may be, with all accessories for all floors etc. as per direction of Engineer-in-charge. Make- POLYCAB/ HAVELLS/ RR KABLE
52FIRE EXTINGUISHERSSupplying installation testing and commissioning of ABC type fire Extinguishers of 6 kg capacity confirming to IS:14609 including cost of all material & labour for all floors & service building etc. all complete. Make-MINIMAX/ CEASEFIRE/ SAFEX/ SAFEPRO / SAIEX
53Supplying, installation, testing and commissioning of CO2 type Fire Extinguisher 4.5 kg capacity confirming to IS: 2878 made from ISI marked seamless cylinder confirming to IS: 7285, fitted with ISI marked controlled valve confirming to IS: 3224, high pressure 1mtr discharge hose & horn complete with initial gas charged with carrying handle & wall mounting bracket for all floors & service building etc. as per direction of Engineer-in-charge. Make-MINIMAX/ CEASEFIRE/ SAFEX/ SAFEPRO/ OMEX
54Supply & Installation Fire Bucket 9 Ltr Capacity ( 4 nos Bucket with one MS Stand)
55PA SystemSupply & Installaton of S 400T High Fidelity sound for music. Speaker System consists of woofer & dome tweeter. Elegant plastic cabinet in white colour. Ideal for background music in offices, banks, restaurants, showrooms etc. High fidelity 2-Way, 100V multi purpose PA speaker system. 100V Power taps of 16W, . Power taps can be selected through rotary switch. Facility to use as 8 ohms Low Impedance Speaker available. Weather Resistant Speaker. Movable mounting bracket supplied, can be mounted in vertical or horizontal positions. Make-AHUJA
56Supply & Installation of High Power PA Amplifier,his is a rugged and highly reliable product, ideally suited for a wide variety of music and public address applications.6 Mic & 2 Aux Inputs. Built-in MP3 player with LCD display, remote control, for USB, SD/MMC cards.Preamplifier and Line Output for connecting to a Booster Amplifier and for recording the programme. Line Input for connecting the output from any external mixer or permitting SSA-250DP to be used as a Booster Power Amplifier Resettable circuit breaker for protection against overload and short circuit.Instant transfer to DC power (2Ã- 12C Car Battery) if AC power fails. Box Speaker/Driver Unit selector switch. Bass boost defeated at Driver Unit position for safer operation of driver units. if AC power fails. with booster amplifier. Make-AHUJA
57Supply & Installation of Mouthpiece with stand make-AHUJA
58Providing and laying of a pair of 1 sq.mm single core flexible copper cable (2X 1) to be laid within Existing PVC conduit of suitable size to be erected above the wall or concealed, as the case may be, with all accessories for all floors etc. as per direction of Engineer-in-charge. Make- POLYCAB/ HAVELLS/ RR KABLE
59SignageSupply, Installation, Testing & Commissioning of Illumination Glow light for Exit Indication with Battery Back-up,Make-Agni / Prolite/ Any ISI
60TERACE TANKProviding, fitting fixting including testing & commissioning of following capacity polyethlyene moulded water storage cylindrical tank with lid locking arrangement as per IS: 12701/1996 with ISI mark including cutting holes of required size & shape. Providing fitting and fixing of UPVC water tank connector / Adaptor with jam nut etc. for filling , delivery , overflow & wash out srrangments, including hoisting upto a height of 10 mtr above the ground level & placing the tank of required position. Make-SINTEX 5000 Ltr capacity water tank
61Supplying & Fixing of CPVC or UPVC 40 mm dia Pipe complete as per direction of Enginer in Charge Make-Astral / Supreem / any ISI or EQV Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58653335
AUTHORITY Local Bodies
TENDER VALUE Ref. Documents
LAST DATE 30-11-2026
Authority
Authority Name Municipal Bodies
Work Description Tender for Supply, Installation, Testing & Commissioning Of Fire Fighting Wet Riser, Pumping Unit, Fire Alarm System, Pa System, Fire Extinguishers & Evacuation Sinages Of Manorama Market Complex (S + 3 Floors) At Dhenkanal, Odisha.
Basic Detail
Tender No DKL MPLTY/09/2026-27
Bidding Type Tender
Location
City Dhenkanal
State Odisha
Key Dates
Publish Date 21 Nov 2026
Submission Date 30 Nov 2026
Open Date 01 Dec 2026
Finance
Tender Value Ref. Documents
Tender Fee 6000
EMD 23962
Exemption Available
Document List
59e13851-f4ef-4a00-a79b-eff3f60c334e.html
BOQ_622672.xls
Tendernotice_1.pdf
Tendernotice_2.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 21, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 30, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 8 days
Dec 01, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 9 days

Tender Documents

Download All (ZIP) ↓
html

59e13851-f4ef-4a00-a79b-eff3f60c334e.html

xls

BOQ_622672.xls

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender