Tender For Provision Of Street Light From Hi-Tech Square To Pandra Village Square In Ward No. 18
Tender Value
44.42 Lakhs
Estimated cost
Bid Submission
02 Dec 2026
10 days left
EMD
44500
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Street Light From Hi-Tech Square To Pandra Village Square In Ward No. 18
BOQ
| Sl. No. | Item Description |
| 1 | Supply & installation of 7mtr long hot dip Galvanized swaged type steel tubular pole with MS base plate 300X300X6 mm and having pole dimensions: -Bottom: -114.3 OD X 5.40mm X 4mtr long,Middle:88.9 OD X4.85 mm thickness X 1.5mtr long, Top: -76.1 OD X 3.25 mm thickness X 1.5mtr long.(Make- Utkal Galvanizers, Utkarsh, Bajaj/ Crompton/RR Ispat) |
| 2 | Supply & fixing of 50mm dia Detachable Single arm (1mtr long) bracket for Tubular Pole. (Make- Utkal Galvanizers, Utkarsh, Bajaj/ Crompton/RR Ispat) |
| 3 | Labour charges towards installation of steel tubular pole including concreting of 3Ft 3 inch below ground level and couping of 2 Ft above ground level of the pole. |
| 4 | Supply & Installation of 120 Watt ratings Streetlight with batwing spread in grey corrosion free powder coated aluminium pressure die-cast housing (ADC 12). The IP 66 (ingress protection) and IK10 (impact resistance) heat resistance polycarbonate with potted non-dimmable electronic driver should deliver an operating input voltage range of driver (volts) 140-275 VAC , Operating input frequency range of driver ( Hz) 50 Hz-60 Hz, Operating Temperature-10°C to 55°C, Driver Power Factor ≥ 0.90, Driver THD ≤10%, Driver efficiency≥90% and an inbuilt surge protection of 5KV and additional surge protection of 20 KV/10KA with working humidity range should be 0-95%. The streetlight should come with LEDs of CREE/Osram/Lumiled make with a LED Chip level efficacy of at least ≥190 lumens per watt and a system efficacy ≥ 150 lumens per watt with a CRI ≥70(±2) and CCT of 5700K -6500K (IESNA tolerance). The UV resistant polycarbonate 120° lens should provide a focused photometry to provide uniform lighting. The LED life span should be ≥50,000 Hours, Higher voltage Auto Cut- off ≥320 VAC with Phase-to-Phase sustainability of 8 Hours with short Circuit Protection and Reverse Polarity Protection. LED streetlight must have BS Certification. The fittings should be connecting through a 3 C Cup. Cable i.e, R Y E Connection Options. Minimum Warranty of the fitting should be 5 year. (Make-Havells/ Cromption/ wipro/ Philips) (As per direction of E-I-C) |
| 5 | Supply & laying of following Copper unarmoured XLPE cables insulated ISI marked. (Make- Havells/ Polycab/ KEI / V-Guard/ Gloster)(a) 3cx1.5sqmm |
| 6 | Supply & laying of following PVC Aluminium armoured XLPE cables insulated ISI marked .(Make- Havells/ Polycab/ KEI / V-Guard/ Gloster)(a) 2cx10sqmm |
| 7 | Supply & laying of 40 mm HDPE pipe for insert of cable laying. |
| 8 | Laying of one number of PVC insulated and PVC sheathed / XLPE power cable of 1.1KV grade of size not exceeding 25 sq.mm direct in ground including excavation, sand cushing, protective covering and refilling the trench etc. as required. |
| 9 | Supply & installation of 70 A electronic Timer ON/OFF switch for automatic street light control with box (Make-L&T, Crompton, GIC) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysDec 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender