Tender For Certain B/R Repairs And Day To Day Maintenance At Nt Pool, Boat Pool Under Age B/R Ii Of Ge Nw Nofra.
Tender Value
49 Lakhs
Estimated cost
Bid Submission
10 Dec 2026
19 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Certain B/R Repairs And Day To Day Maintenance At Nt Pool, Boat Pool Under Age B/R Ii Of Ge Nw Nofra.
BOQ
| Sl. No. | Item Description |
| 1 | Note : The tenderer shall note that before quoting his unit rate, all items of works shall be executed in high rise building & necessary scaffolding & safety measurement.After painting ,cleaning of all floors, glass & furniture by the contractor on his own arrangement. |
| 2 | Preparation of old plastered surfaces of walls and apply two coat distemper oil emulsion over a coat of 2 mm thick wall care putty over a coat of primer complete all as specified. |
| 3 | M&L for preparation of old wall surfaces and applying two coats of oil emulsion distemper complete all as specified and directed. |
| 4 | M&L for preparation of old distempered surfaces of walls and applying one coat of oil emulsion distemper on walls etc all as specified. |
| 5 | Material & Labour for complete removal of existing treatment of walls by washing down and smoothing old surface of walls/ ceiling, prerparation of surface by a thin layer putty and applying two coats of interior emulsion over a coat of primer over a layer of smooth Putty finish punning 3mm thick strictly as per manufacture instruction with smooth roller finish ,complete all as specified and directed. |
| 6 | M&L for cleaning of PCC paver block, chequred tiles and any type of PCC flooring by water spray and apply one coat of acrylic emulsion paint of any shade suitable for floor by using brush, complete all as specified. |
| 7 | M&L for preparation of old surfaces of walls and applying two coat of white wash on walls etc all as specified. |
| 8 | M&L for preparation of old plastered surfaces of ceiling and applying one coat of oil emulsion distemper on ceiling . |
| 9 | M&L for preparation of old plastered surfaces on ceiling and applying two coats of white wash on ceiling. |
| 10 | M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint & ht. upto 7th floor of bldg., complete all as specified. |
| 11 | M&L for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint & ht. upto 7th floor of bldg., complete all as specified. |
| 12 | M&L for preparation of old surface of wooden of any description including cleaning and applying one or more coat french polish till achiving desired finish all as specified and directed by Engeer- in charge. |
| 13 | M&L for preparation of old decorated surfaces of walls by scrapping old paint by steel wire brush, wash the surface throughly and applying one coat of acrylic emulsion exterior grade (100%) including necessary steel scaffolding all round the work side for any posititon/height, complete all as specified and directed.(For bldg upto GF to max of 7th Floor + upto height of mummty top ).Note :-Necessary safety precautions need to taken before applying paint. |
| 14 | M&L for preparation of old decorated surfaces of walls by scrapping old paint by steel wire brush, wash the surface throughly and applying two coat of acrylic emulsion exterior grade (100%) including necessary steel scaffolding all round the work side for any posititon/height, complete all as specified and directed.(For bldg upto GF to max of 7th Floor + upto height of mummty top ).Note :-Necessary safety precautions need to taken before applying paint. |
| 15 | Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and disposing the rubbish to the out side of MOD land. |
| 16 | M&L for Non skid coloured ceramic tiles 7 to 8 mm thick(square/Rectanglar) area of each tiles exc 0.11 Sqm but n exc 0.18 Sqm in floor including 20mm thick screed bed or bedding layer for laying floor finishes in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified. |
| 17 | M&L for coloured glazed ceramic tiles 600x300 x7 mm mm thick but as on vertical surfaces such as skirting/dado including 15 to 20mm thick backing coat in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match. |
| 18 | M&L for light shade coloured vitrified ceramic tiles 10 mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 Sqm in floors and wall etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm thick screed bed in CM 1:6, complete all as specified and directed. |
| 19 | Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified. |
| 20 | M&L for 40 mm thick cement concrete type B-1 , 1:2:4 (20 mm graded stone agg) as in floor and fisnishing cement concrete surface even and smoothby using extra cement all as directed. |
| 21 | M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundations, filling ad mass concrete, complete all as specified. |
| 22 | M&L for cement concrete interlocking paver tiles 60 mm thick having glossy finish (colour and pattern approved by GE) (tested as per IS 1237-1980) laid over and including 50 mm thick dry sand cushioning and voids filled with dry and surface compact, including compaction by means of surface vibrator & removing of old broken tiles, complete all as manifacture instructions specified and directed. |
| 23 | M & L for Cement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less |
| 24 | Grinding and polishing existing floor of any type (kota stone/mossaic/cuddpah stone floor) complete all as specified. |
| 25 | Dismantling of ceiling boards any thickness etc including aluminium grid frame work complete all as specified and as directed. |
| 26 | M&L for false ceiling made out of 600x600x 4 to 6 mm thick ceiliing board / tiles deep panel suspensor system made out of powder coated GI sheet main tee of size 23.50x40x0.63mm and cross tee of size 23.50x23.50x0.63mm and angle size 19x19x0.63mm including 3mm GI wire for suspending bolts necessary washers nut/clits/pin hook etc for securing frame work to ceiling to the snap grid all as directed by Engr-in-charge including provn of necessary holes / cuttings for providing light/fan as required including making necessary recesses / projected pattern complete all as specified and as directed. |
| 27 | Taking down ceiling board/tiles from aluminium snap grid frame work and refixing the same in the same position after necessary tightening the sagging portion, replacement of the Main Tees, cross Tees, angles, suspending if required, including bolts, necessary washer,nut/clits/pin hook etc for securing frame work to ceiling to the snap grid complete all as specified and as directed. |
| 28 | Demolition of brick work or stone masonary built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles. |
| 29 | Material and labour for brick work with sub class \\"B\\" bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6), complete all as specified. |
| 30 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4), complete all as specified. |
| 31 | Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water, upto 7th floor of bldg.,complete all as specified. |
| 32 | Rendering 15mm thick cement plaster in cement mortor 1:6 on brick or concrete surfaces in patches, surfaces to be finished even and smooth without using extra cement, complete all as specified. |
| 33 | M&L plastering 10mm thick in CM 1:3 in ceiling finishing even and smooth without using extra cement, complete all as specified. |
| 34 | Rendering 15mm thick on brick work or concrete surfaces in cement mortar 1:4 finished even and fair including mixing integral water proofing compound in the proportion as mentioned in manufacturer's instructions & ht. upto 7th floor of bldg., complete all as specified. |
| 35 | Supply only integral water proofing compound complete all as specified. |
| 36 | M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer on 1 to 2 mm thick wall care putty all as specified and directed. |
| 37 | M&L for preparation of newly plastered surfaces of wall and applying two coats of exterior emulsion paint over a coat of primer on wall complete all as specified and directed.(Work carried out upto 7th floor of building either from inside or from outside) |
| 38 | M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash on ceiling complete all as specified and directed. |
| 39 | S&F in repairs vitreous china wash down water closet pan white (pedestal pattern) including plastic sheet cover with nuts and bolts etc all as specified and directed. |
| 40 | S&F in repairs water closet squattin pan (Orissa pattern) 580x440mm, white with integral foot rests including connecting to trap and to flushing pipe antisyphonage pipe including making good to floor (excluding flushing cistern and flush pipe). |
| 41 | S&F vitreous china wash hand basin flat back of size 550x400mm including bracket, brass chromium plated waste coupling of 32 mm bore and pillar tap 15mm bore dia fancy type complete as fixed in repair. |
| 42 | S&F 10 ltr capacity PVC syphonic action type flushing cistern low level white with inlet, ball valve, float and handle including connetion to pipe but fixed in repair complete all as specified. |
| 43 | S&F 450mm x 600 mm bevelled edge looking mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers as in repairs all as specified and directed. |
| 44 | S&F in repairs 15mm size Bib taps, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule. complete all as specified and directed. |
| 45 | S&F in repairs fancy type Pillar taps 15mm size cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified. |
| 46 | S&F in repairs CP angular stop cock 15 mm bore all as specified and directed. |
| 47 | S&F health faucet ABS Body with 8 mm dia 1 mtr flexible tube and wall hook. |
| 48 | S&F in repairs, Plastic water closet seat, black or white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device.all as directed. |
| 49 | S&F as in repairs flush pipe of PVC 32 mm dia for low level cistern and connected to WC, complete all as specified. |
| 50 | S&F in repairs 32/38 mm dia WHB/urinal /Sink flexible waste pipe all asw specified and directed. |
| 51 | Dismantling wrought iron or mild steel work of any description not otherwise provided for. |
| 52 | Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks and similar work conforming to Fe 290 Gd E-165 all as specified. |
| 53 | S&F Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc, complete all as specified. |
| 54 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings. |
| 55 | Supply and fix Pre-painted Galvalume Aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified. |
| 56 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges/roof covering/cladding to wall, fixed with self tapping screws as specified and as directed. |
| 57 | M&L for preparation of newly steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 21, 2026
11:30 IST
Tender Published
Tender notice published.
TodayDec 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysDec 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender