Power Government Departments Closing in 4 days TDR #58652600

Tender For Tender Tender For Providing And Fixing Pvc Louvers Wall Panelling, Replacement Of Damaged Doors And Boundary Wall Of Sub Division Office Building At Kataula Under Electrical Sub Division, Hpsebl Kataula. Ch To:-Ts 59/2026-27

Issued by Government Departments · Mandi, Himachal Pradesh
Tender Value
1.78 Lakhs
Estimated cost
Bid Submission
27 Nov 2026
4 days left
EMD
1783
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Mandi → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Tender Tender For Providing And Fixing Pvc Louvers Wall Panelling, Replacement Of Damaged Doors And Boundary Wall Of Sub Division Office Building At Kataula Under Electrical Sub Division, Hpsebl Kataula. Ch To:-Ts 59/2026-27

BOQ

Name of Work:- Tender Tender for Providing and fixing PVC Louvers wall panelling, Replacement of damaged doors and Boundary wall of Sub Division Office Building at Kataula under Electrical Sub Division, HPSEBL Kataula. Ch To:-TS 59/2026-27
Sl. No. Item Description
1Civil work
2Providing and fixing PVC Lovers wall panelling of approved brand, prelaminated one side decorated lamination and other side balancing lamination with necessary fixing arrangements complete.
3Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding /laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in- Charge. 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern.
4Centering and shuttering including strutting, propping etc. and removal of form work for :Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.
5Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 Cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size)
6Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area 3 sq. metres and below
7Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) : For Fixed PortionPowder coated aluminium (minimum thickness of powder coating 50 micron)
8Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately):-Powder coated aluminium (minimum thickness of powder coating 50 micron)
9Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-chargePre-laminated particle board with decorative lamination on both sides
10Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete.
11Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :200x10 mm
12Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :300x16 mm
13Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :125 mm
14Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil.
15Brickwork with common burnt clay F.P.S. (nonmodular) bricksof class designation7.5 in super structure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:4 (1 cement : 4 coarse sand)
16Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and plying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
17Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used. With G.I. barbed wire
1812 mm cement plaster of mix 1:4 (1 cement: 4 fine sand)
19Finishing walls with Acrylic Smooth exterior paint ofnrequired shade :New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
20Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. Group B.
21P/F 18 W LED Slim Surface Mounted square LED Panel al. die cast body with premium difuser toensure glare free and even distribution of light. Philips, Crampton or Panasonic Make Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58652600
AUTHORITY Government Departments
TENDER VALUE 1.78 Lakhs
LAST DATE 27-11-2026
Authority
Authority Name Himachal Pradesh State Electricity Board
Work Description Tender for Tender Tender For Providing And Fixing Pvc Louvers Wall Panelling, Replacement Of Damaged Doors And Boundary Wall Of Sub Division Office Building At Kataula Under Electrical Sub Division, Hpsebl Kataula. Ch To:-Ts 59/2026-27
Basic Detail
Tender No MED/K-71/2026-27
Bidding Type Tender
Location
City Mandi
State Himachal Pradesh
Key Dates
Publish Date 21 Nov 2026
Submission Date 27 Nov 2026
Open Date 27 Nov 2026
Finance
Tender Value 1.78 Lakhs
Tender Fee 590
EMD 1783
Exemption Not Available
Document List
4e923bac-f075-4841-9c65-8a2c062e2d68.html
71bid.pdf
BOQ_221899.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 21, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 27, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 4 days
Nov 27, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 4 days

Tender Documents

Download All (ZIP) ↓
html

4e923bac-f075-4841-9c65-8a2c062e2d68.html

pdf

71bid.pdf

xls

BOQ_221899.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender