Tender For Renovation Of Meeting Hall At M.N. High School Pattamundai For The Year 2026-27. Civil,E.I And Ph.
Tender Value
45.49 Lakhs
Estimated cost
Bid Submission
05 Dec 2026
13 days left
EMD
45500
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kendrapara → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Meeting Hall At M.N. High School Pattamundai For The Year 2026-27. Civil,E.I And Ph.
BOQ
| Sl. No. | Item Description |
| 1 | CIVIL PORTION OF WORKEarth work in excavation hard soil with initial lead and lift including rough dressing and breaking the clods to maximum 5cm to 7cm in size and laying the layers notexceeding 0.30m in depth as per specification and approved by the department. |
| 2 | Supplying, filling in foundation and plinth with sand including watering and ramming, poking & compacting including cost, conveyance, royalties, taxes of the materials and cost of all labour, labour cess, T&P etc. required for the work complete as directed by the Engineer-in-Charge. |
| 3 | Providing and laying plain cement concrete of proportion (1:4:8) using 4 cm. size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including the cost of all materials, cost of labour, conveyance, taxes, royalties, loading, unloading, shuttering, centering, curing, labour cess, T&P, etc. all complete. |
| 4 | Cement Concrete of proportion (1:2:4) including cost centering and shuttering using 12mm size black hard crusher broken granite chips and screened and washed sharp sand for mortar of approved quality and from approved quarry including the cost of all materials, cost of labour, conveyance, taxes, royalties, loading, unloading, curing, labour cess, T&P, etc. all complete as per the direction of Engineer-in-charge. |
| 5 | Providing, lifting, hoisting and laying in Position Reinforced Cement Concrete of M-20 grade including cost of Centering and shuttering using 20mm and down grade size black hard granite (Crusher Broken) chips of approved quality from approved quary including the cost of all materials, cost of all labour, conveyance, taxes, loading, unloading, T&P, royalty, labour cess, all complete as per the direction of Engineer-in-charge but excluding the cost of steel reinforcement.Column Base |
| 6 | ii) Column & beam |
| 7 | iii) Grade Beam |
| 8 | vi) Chhaja |
| 9 | vii) Roof slab |
| 10 | Cutting, Straightening, coiled or bent up MS Road of TOR steel using SAIL/RINL/TATA/JINDAL/SHYAM Steel including bending, binding,welding and joining if necessary and tying the grills and placing in position as required for RCC work and hoisting, lowering laying icluding cost, conveyance, taxes of MS rod or TOR steel and binding wire of 18 to 20 gauge and labour required for the work for bending,binding and tying the grills etc. complete. |
| 11 | Providing Fly-Ash Brick masonry work in Superstructure using Fly-Ash Bricks of size 250mm x 120mm x80mm in cement mortar (1:6) including the cost of all materials, cost of labour, conveyance, taxes, loading, unloading, royalties, labour cess, scaffolding, curing for required period, T&P, etc. all complete as per the direction of the Engineer-in-charge. |
| 12 | Superstructure |
| 13 | Providing 12 mm thick cement plaster in cement mortar (1:4) including the cost of all materials, labour, conveyance, taxes, loading and unloading, labour cess, royalties, scaffolding, watering and curing, T&P etc. complete as per direction of the Engineer-in-charge. |
| 14 | Providing 12 mm thick cement plaster in cement mortar (1:6) including the cost of all materials, labour, conveyance, taxes, loading and unloading, labour cess, royalties, scaffolding, watering and curing, T&P etc. complete as per direction of the Engineer-in-charge. |
| 15 | Providing 16 mm thick cement plaster in cement mortar (1:6) including the cost of all materials, labour, conveyance, taxes, loading and unloading, labour cess, royalties, scaffolding, watering and curing, T&P etc. complete as per direction of the Engineer-in-charge. |
| 16 | Providing 6mm thick cement plaster in cement mortar of (1:4) to RCC surface including roughening, scraping, cleaning and finished smooth including the cost of all materials, cost of labour, conveyance, loading and unloading, all taxes and royalties, scaffolding, watering and curing , sundries, T&P etc. complete as per direction of the Engineer-in-charge. |
| 17 | Providing & laying granite stone flooring using 20 mm thick granite stone slab of approved quality, colour and size between 0.4 Sqm. to 1.0 Sqm. & above in Stair Treads and Risers over an under layer of 20 mm thick cement mortar (1:4) (1 cement: 4 coarse sand) confirming to IS-1443/1972 including cutting to size, laying and joining with white cement slurry and colouring pigment to match the shade including cost of all labour, materials, taxes, royalties, loading and unloading, conveyance, sundries, watering and curing, etc. complete as per the direction of the Engineer-in-Charge. |
| 18 | Supplying, fitting and fixing of 20mm thick granite slab in landing and floors laid on 20mm thick cement mortar (1:4) jointed white cement slurry and colouring pigment to match the shade including cost of all materials, cost of labour, conveyance, taxes, loading, unloading, T&P, etc. complete as per the direction of the Engineer-in-Charge. |
| 19 | Supplying and fitting-fixing of Un-plasticised Poly Vinyl Chloride (UPVC) (FENESTA/NCL VEKA LTD) Casement Door - 60- Series duly manufactured using UPVC reinforced profiles of 60mm x 55mm x 2.5mm for outer frames, 102mm x 60mm x 2.5mm of casement Door Sash Profice and 74mm x 60mm x 2.5mm mullion profile capable of mounting single glazing system, structually reinforced with hot dip galvanised up to 50 microns of minimum thickness of 2.0 mm prefabricated & welded through fusion welding the door sash shall be fitted with 12mm thick WPC Board of Greenply make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 No. per set of sashes and the system is to be installed at the site anchor fasteners, silicon rubber sealant, easy glazing/degiazing at site etc. including cost and conveyance of all materials, accessories, labour charges, materials ane product conforming to ASTM D 638-14, EN-477-95 and other applicable sodes and standards ..........(D and D4) |
| 20 | Supplying, fitting and fixing of Unplasticised Poly Vinyl Chloride (UPVC) (Fenesta/NCL VEKA Ltd) Sliding windows -60 Series duly manufactured using UPVC reinforced profiles of 108mmx45mmx2.5mm for outer outer frames and window sash of 39mmx58mmx2.5mm capable of mounting single glazing system, structurally reinforced with hot dip galvanised upto 50 microns of minimum thgickness of 1.5mm prefabricated and wellded through fusion welding and the window frame shall be fitted with 6mm thick clear toughened glass of saint gobain make duly fiuxed with EPDM weathering seal resistant and the system is to be installed using reinforced large coupler at the site using anchor fasteners, silicon rubber sealant, easy glazing/deglazing at site, etc. including cost and conveyance of all materials, accessories, labour charges and product confirming to ASTMD 638-14,EN-477-95 and other applicable codes and standards. |
| 21 | Supplying, fitting and fixing of Unplasticised Poly Vinyl Chloride (UPVC) (Fenesta/NCL Veka ltd) Ventilator/Top hung - 60 Series duly manufactured using UPVC reinforced profiles of 60mmx55mmx2.5mm for outer frames,75mmx60mmx2.25mm for casement window sash profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised upto 50 microns of minimum thickness of 1.5mm prefabricated and wellded through fusion welding, the window sash shall be fitted with 6mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathring seal resistant accessories like clipping, locking system made up aluminium 1 No. per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/deglazing at site, etc. including cost and conveyance of all materials, accessories, labour charges and product confirming to ASTMD 638-14,EN-477-95 and other applicable codes and standards. |
| 22 | Supplying , fitting and fixing vitrified tile in floors of size 600mm x 600mm of approved make conforming to IS : 13755 laid on 20mm thick cm (1:4) joints bed and filling joints with white cement of approved quality including cost of all materials labour (T&P) etc complete. |
| 23 | Supplying, fitting and fixing of vitrified tiles (Plain/Ivory) in dados, skirting and risers of steps over 12mm thick cement mortar (1:3) jointed with neat cement slurry mixed with colouring pigments to match the colour and shade including the cost of washing, polishing, cost of materials, cost of all labour, conveyance, taxes, loading & unloading, T&P, watering and curing etc. complete. |
| 24 | Providing and laying Precast Chequered tile (300mm x 300mm) over 20mm thick bed of cement mortar (1:4) jointed with neat cement slurry mixed with colouring pigment to match the colour and shade including rubbing and cleaning, cost of labour, materials, taxes, loading and unloading, conveyance, sundries, watering and curing, etc. complete as direction of the Engineer-in-Charge. |
| 25 | Supplying, fitting and fixing of G.I. doors/windows/grill gate made out of G.I. square bars, angle, channel, flat, plate, etc painted with red oxide primer cost of all materials, labour, conveyance, taxes, loading, unloading, T&P, etc. all complete. |
| 26 | Providing, fitting, fixing up false ceiling by using 12.5mm thick Fire Line Gypsum Board of approved design and drawing in all floors with G.I Section on 4 sides of walls to be fixed by means of steel screw and PVC plug and the G.l. grid 2x2 to be suspended from ceiling including cost of all materials, all labour, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge |
| 27 | Finishing the wall with Cement based wall Putty of approved make and finished smooth and even surface to receive the painting including the cost of all materials, cost of labour, conveyance, taxes, loading, unloading, scaffolding, cess, T&P, etc. all complete. |
| 28 | Priming with one coat of water bound cement primer of approved quality and make including the cost of all materials, labour, conveyance, taxes, loading, unloading, scaffolding, T&P, etc. all complete as per the direction of Engineer-in-charge. |
| 29 | Providing and painting with two coats of Plastic emulsion paint of approved quality, make and shade to give an even surface including the cost of all materials, labour, conveyance, taxes, loading, unloading, scaffolding, T&P, etc. all complete as per the direction of Engineer-in-charge. |
| 30 | Providing and painting with two coats of Weather Coat of approved quality, make and shade to give an even surface including the cost of all materials, labour, conveyance, taxes, loading, unloading, scaffolding, T&P, etc. all complete as per the direction of Engineer-in-charge. |
| 31 | Providing and Painting two coats of synthetic enamel paint of approved quality, make and shade on Iron / Wood Works over one coat of primer including the cost of sand papering, surface polishing, cost of all materials, cost of labour, conveyance, taxes, loading, unloading, scaffolding, T&P, etc. as per direction of Engineer-in-charge. |
| 32 | Supplying of filling good earth in ground and over areas including watering, ramming, consolidating and dressing, labours, tools, taxes etc., all complete as per the specification and direction of Engineer-In-charge. |
| 33 | EI PORTION OF WORK WirringRecessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metallic PVC flexible conduit with 5Amp, 250V Modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size, MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make of wire-Make of modular switch -Anchor Roma/Legrand/L & T/ Crabtree)Group- A L.P-25 |
| 34 | Group- B L.P- 10, FP-12, EFP-02 |
| 35 | Supply and fixing of 6 Amp plug with 6 Amp switch on existing board (Piano type/cover including connection etc. as required ) |
| 36 | Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing of 6pin 6Amp & 6Amp socket outlet and 6Amp Modular switches connection (make-Anchor Roma/ Legrand /L & T/ Crabtree) |
| 37 | Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing of 6pin 6Amp & 16Amp socket outlet and 16Amp Modular switches connection (make-Anchor Roma/ Legrand /L & T/ Crabtree) |
| 38 | Wires Recessed wiring to submain in the following sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with the following sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required.(Make of wire-Finolex/L&T/Anchor/Havells/V-Guard//HPL)2 X 1.5 sq.mm +1 X 1.5 sq.mm 20 mm dia |
| 39 | 2 X 2.5 sq.mm +1 X 1.5 sq.mm 20 mm dia |
| 40 | 2 X 4 sq.mm +1 X 1.5 sq.mm 20 mm dia |
| 41 | 4x10 sq.mm +2 X 4 sq.mm in 25 mm dia |
| 42 | S/F of 20Watt LED tube light Fitting(4ft) (Make-Havells/ Philips/Bajaj/Crompton) |
| 43 | S/F of 9 Watt LED bulb (Make-Havells/ Philips/Bajaj/Crompton) |
| 44 | Supply & Fixing of BLDC A.C Ceiling fan 48\\" size (1200 mm) having wattage not more than 28 watt and air delivery > 215 meter3 per min replacement warrenty will be 4 years . (Make- Crompton Energion/ Hacvells Efficiencia Neo/ Usha Technix) |
| 45 | S/F of 18watt(210mmX 210mm) Recess/surface square/round ceiling light with replacement warrenty two years(Make-Havells/Phillips/Bajaj/Crompton/Orient) |
| 46 | Supply Fixing of Exhaust fan 10/12\\" size(make-/ Havells/Usha/almonard) |
| 47 | MCB BOX AND MCBSupply and fixing of following way single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) make- HPL/Havells /Legrand / L & T/C & S )4 way (4+12) Way TPN DD DB MCB |
| 48 | Supply and Fixing of 100 Amp.FP MCB C series ( Make-Legrand DX3/Scnider Act 9/L&T) |
| 49 | 6-32 amp SP MCB C series( Make-Legrand DX3/Scnider Act 9/L&T) |
| 50 | Supply and fixing of 3.5 C X35 Sq mm PVC Alluminium XLPE armoured cable of make - Havells/ Polycab/ KEI / V-Guard / Glowstar |
| 51 | Earthing S/F of Copper plate Earthing complete in all respect as per specification of SR 2011 and as per Direction of Engineer-in -ChageStandard Earthing as per Govt. Spcn. |
| 52 | Salt and charcoal for G.I or copper pipe earth electrode as required |
| 53 | Supplying and laying 25mm X 5mm G.I strip on surface or in recess for connection etc as required. |
| 54 | Supply , installation , testing and commissioning of 625 Amp INDOOR pannel board with danger board with danger board. 16/18 SWG pannel box 30\\"X 18\\" X 10 size for single door made out of CR sheet of 16SWG and boarder angle frame to provide above pannel with proper space ,hinged door must be painted one coated red oxide and two coat enamel gray paint with powder coats.(main panel ) |
| 55 | Supply and fixing of internal wiring to equipment installed in the pannel board with required size of copper multistrand single core cables duly crimped with copper lugs and all connections L X B including cost of copper conductor and other fittings. |
| 56 | S/F of copper bus bar 25x 5mm with required size of insulating material and nut and bolts. |
| 57 | S/F of 63 Amp MCCB 50 KA ( Make-L&T/ Legrand/Schnider/ C&S/ Havells )for incomming Cable |
| 58 | S/F of digital ammeter for the indoor panel |
| 59 | S/F of digital voltmeter for the indoor panel |
| 60 | Supply and fixing of Indicator lamp with toggler switch and fuse |
| 61 | Istalation charge of indoor panel |
| 62 | PH PORTION OF WORKSupplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor CPVC pipes conforming to IS:15778 having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00. spacing. This includes Jointing of pipes & fittings with one step CPVC solvent cement and testing of Joints all complete as per specification and direction of the Engineer in charge. 20mm dia CPVC pipe |
| 63 | 25mm dia C-PVC pipe |
| 64 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor pvc pipes conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge.Ground floor 25mm dia PVC ASTM pipe (sch-80) |
| 65 | 32mm dia HDPE pipe |
| 66 | Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge. |
| 67 | Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing GI pipes / PVC pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4) including finishing complete so as to make it leak proof as per direction of the Engineer in charge. in first floor |
| 68 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/ PVC pipes and making good the damages as per the direction of the Engineer in charge. In ground floor |
| 69 | Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge 15mm dia CP bib cock CON-CHR-037KN(Jaquar make ) |
| 70 | 15 mm dia CP two way Bib cock CON-CHR-041KN(Jaquar make ) |
| 71 | 15mm dia CP Health foucet (Con-ALD-CHR-573 Jaquar make) |
| 72 | 15 mm dia CP Long body Bib cock( CON-CHR-107KN Jaquar make ) |
| 73 | 15mm dia CP angle stop cock(CON-CHR-053KN Jaquar ) Make |
| 74 | 25mm dia CPVC fullway valve |
| 75 | 15mm dia CP flange |
| 76 | 15mm dia CP extension piece |
| 77 | Supplying all materials, labour, T&P and fitting and fixing 12.50 litres _10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge10 litres capacity pvc low level cistern with 32mm dia CP long flush bend ( Slimline white ) |
| 78 | Supplying all materials, labour, T&P and fitting and fixing UPVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592 1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non heat application method/as per manufacturers specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge 110mm dia UPVC SWR pipe(Ori Plast Make TypeA) |
| 79 | 110mm U-PVC door cross Tee |
| 80 | 110mm U-PVC door Tee |
| 81 | 110mm U-PVC door bend |
| 82 | 110mm U-PVC plain bend |
| 83 | 110mm U-PVC Plain tee |
| 84 | 110mm dia U-PVC 'P' trap |
| 85 | 110mm U-PVC Plain shoe bend |
| 86 | 110mm U-PVC offset without ear |
| 87 | 110mm dia U-PVC Cowl |
| 88 | 125mm dia C.P. Gratings |
| 89 | 110mm dia UPVC Clamp |
| 90 | 110mm dia UPVC Socket |
| 91 | Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge250mm to 375mm thick wall |
| 92 | Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x 30mm footrest, fixing 100mm dia HCI P or S trap (with/without 50mm dia horn) for water closet squatting pan including jointing the trap with pan in cement mortar (1:1), cutting the floor and mending good the damages etc all complete as per specification and direction of the Engineer in charge 580mm size Orissa pan (Parryware / Nycer make ) |
| 93 | Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (European type W.C pan) with integral Por S trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1), fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer in charge. European water closet with S trap plain (Parryware _Nycer make ) |
| 94 | Supplying all materials, labour, T&P and fixing bowl pattern urinal conforming to IS:771-part-3-1985 of the following sizes including connecting the urinal with 32mm dia pvc waste pipe 910mm long by means of white lead mixed with chopped hemp, fixing 32mm dia CP dome waste, 15mm dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc all complete as per specification and direction of the Engineer in charge. Stall urinal (Parryware / Hindware make ) |
| 95 | 15mm dia urinal spreader |
| 96 | 32mm dia C.P. dome waste |
| 97 | Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered Hot and Cold with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the Engineer in charge550mmx400mm size wash hand basin with porcelain pedestal Parryware Hind ware Neyser make ) |
| 98 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge 600mmx450mm size B.E mirror |
| 99 | Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rails complete fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge.600x125mm plate glass shelf with CP guard rails |
| 100 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge.25mmx600mm long CP towel rail |
| 101 | CP ring towel rail |
| 102 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge.CP soap holder |
| 103 | Supplying all materials labour T&P and filling in foundation and plinth with sandwell watered and rammed including conveyance of all materials to work sitepayment of royalty taxes etc all complete as per direction of Engineer in charge In ground floor 2 x 1.50 x 3.00 x 0.30 |
| 104 | Supplying all materials, labour, T&P and providing cement concrete (1:4:8) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. In ground floor2 x 1.50 x 3.00 x 0.10 |
| 105 | Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge2 x 1.50 x 3.00 x 0.05 |
| 106 | Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge2 x 8.50 x 2.10 |
| 107 | Supplying all materials, labour, T&P and providing ceramic tiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge. size 30 x 30 cm Kajaria / Somany / Johnson to be pree approved . 2 x 1.50 x 3.00 |
| 108 | Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge . 60cm x 30cm Kajaria / Somany Ground floor 2 x 8.50 x 2.10 |
| 109 | Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finish structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter.2 x 0.75 x 2.10 |
| 110 | Factory made Solid WPC door frame of size 95mmx55mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the Engineer in charge 2 x ( 0.80+2.10+2.10) |
| 111 | EXTERNAL P.H. WORK Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985 _2000 of the following outside dia for class 3(0.60mpa) including jointing with supply of approved solvent cement by non heat application method/as per manufacturers specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C 1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge 110mm dia |
| 112 | Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, KB brickwork in cement mortar (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size CI grating etc all complete as per approved drawing, specification and direction of the Engineer in charge.Inside size 250mmx250mm |
| 113 | Supplying all materials, labour, T&P and constructing inspection chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips, 12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in (1:1.5:3) using 12mm size h.g chips with RCPC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge.Inside size 760mmx760mmx460mm |
| 114 | Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and fly ash brickwork in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size hg chips on bed, 12mm thick cement plaster (1:4) inside and outside over masonry brickwork, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge 1.20m dia x 2.00m deep soakway pit Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysDec 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender