Tender For Repair And Maintenance Of D-Type Quarters Of Permanent Colony Of Rengali Dam Division
Tender Value
6.20 Lakhs
Estimated cost
Bid Submission
01 Dec 2026
9 days left
EMD
6300
Bank guarantee accepted
Document Fee
4000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Anugul → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance Of D-Type Quarters Of Permanent Colony Of Rengali Dam Division
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling and removing old 2.5 cm thick A.S flooring including stacking the useful materials for reuse and removing the debris and disposal the same within initial lead and lift etc. complete but excluding GSTas per the direction of the Engineer-in-charge. |
| 2 | Providing and laying in position average 25mm thick A.S flooring in cement concrete (1:2:4) using 12mm & down graded crusher broken hard granite chips of approved quality from approved quarry free from weathered skin , laying, punning, watering & curing, including cost, conveyance, royalty etc complete but excluding GST as per the direction of the Engineer-in-charge. |
| 3 | Removing old lime or cement plaster from walls including racking out joints 12mm deep and removing the debris and disposal the same within initial lead and lift etc. complete but excluding GST as per the direction of the Engineer-in-charge. |
| 4 | Providing and laying 12mm thick C.P.in C.M.(1:6) finished smooth over stone/brick masonry work including curing and using good quality screened sand from approved quarry including cost, conveyance, royality, with all lead, lift and delift etc. complete but excluding GST as per the direction of the Engineer -in- charge. (measurement will be taken on finished and approved surface ) |
| 5 | Providing all materias labour T&P fitting and fixing of double leaf panelled MS Door shutters with M.S frame over all size including frame 1980mm (H) x 1070mm (W) made out of the following materials conforming to relevant I.S.S. Frame- 35X35X6mm MS angle, shutter style- top and bottom rail 25X25X3mm MS angle. Door pannel-1.0 mm C.R sheet. Panel stiffners covering width of each leaf- 19X5mm, MS flat 3 nos on each leaf, Hinges sizes- 100 mm 6 nos (3 nos on each side) bought out as per I.S.S. Hold fast- 35X35X6mm MS angle 175mm length bifurcated at the tip 3 nos on each side. Handle-19X5mm MS flat fabricated- 4 nos. Aldrop- 2 nos. bought out as per I.S.S tower bolt- 2 nos. bought out as per I.S.S. (Approximate weight-54 kg) including cost, conveyance etc complete but excluding GST as per the direction of the Engineer-in-charge. |
| 6 | Providing all materials labour T&P fitting and fixing of MS pannelled window double leaved shutter with MS frame and grill. Over all size including frame- 1220mm (H) X 910mm (W) made out of the following materials conforming to relevant I.S.S. Frame- 35X35X6mm MS angle. Shutter style- Top and bottom rail 25X25X3mm MS angle. Window pannel-1.0 mm CR sheet. Panel stiffners covering width of each leaf- 19X5mm MS flat 2 nos on each leaf. Hinges-size 100 mm 4 nos (2 nos on each side) bought out as per I.S.S. Hold fast- 35X35X6mm MS angle 100mm length bifurcated tip 2 nos (on each side). Handle-19X5mm MS flat 2 nos. fabricated (in side). Tower bolt-4 nos bought out as per I.S.S. Horizontal grills-12mm MS round at 100mm spacing. (Approximate weight 39 kg) including cost, conveyance, etc complete but excluding GST as per the direction of the Engineer-in-charge. |
| 7 | Providing all labour T&P for Priming 1 coat on wood or steel surface with approved primer after thoroughly cleaning the surface incluiding cost, conveyance,etc complete but excluding GST as per the direction of the Engineer-in-charge. |
| 8 | Providing all material Labour T&P for Painting two coats on new wood & Iron works with approved paint to give an even shade after priming thoroughly cleaning the surface including cost, conveyance etc complete but excluding GST as per the direction of the Engineer-in-charge. |
| 9 | Earth work excavation in Hard soil or gravelly soil mixed with stone and boulders not exceeding 0.014 cum in volume within initial leads, lifts including dewatering dressing and leveling the sloping bed and breaking the clods to maximum 5cm to 7cm and depositing the excavated materials at the descried location including loading and unloading at site of the work and spreading the excavated materials in layers not exceeding 0.30 in depth complete in all respect including all labour, T&P, Royalty but excluding GST etc. and as per specification and direction of the Engineer-in-charge. |
| 10 | Filling foundation and plinth with clean and coarse sand well watered and rammed etc. complete including cost, conveyance, royalty, etc. complete in all respect but excluding GST and as per the direction of the Engineer-in-charge. |
| 11 | Providing and laying in position cement concrete (1:3:6) using 40mm & down graded crusher broken hard granite metal of approved quality from approved quarry free from weathered skin , laying, watering & curing, including cost, conveyance, royalty etc complete but excluding GST as per the direction of the Engineer-in-charge. |
| 12 | Providing and laying in position cement concrete (1:2:4) using 12mm & down graded crusher broken hard granite chips of approved quality from approved quarry free from weathered skin , laying, watering & curing, including cost, conveyance, royalty etc complete but excluding GST as per the direction of the Engineer-in-charge. |
| 13 | Removing old tarfelt from roof slab, cleaning the surface lowering the debris withen 50m lead etc complete as per the direction of Engineer in Charge |
| 14 | Providing and laying water proof with polymeric bituminous membrance (Plastic felt of 2.25Kg/Sqm and 1.5mm thickness consisting of layers having center core of 20microns thermo plastic high molecular high density HM HDPE film of grade 2504 including priming the surface with bituminous primer @ 0.3Kg per sqm providing a coat of hot blown bitumen of 1.32Kg per sqm, applying and laying lastic felt membrance with 10cm over lap adhered to blown bitumen of 85/25 or 90/15 grade and covered with a layer of hot blown bitumen @ 1.2Kg/Sqm etc complete but excluding GST and as directed by the Engineer-in-Charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysDec 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender