Tender For Provision Of Street Lights Inside Of Unit-2, Market Building In Ward No. 40.
Tender Value
7.34 Lakhs
Estimated cost
Bid Submission
02 Dec 2026
11 days left
EMD
7400
Bank guarantee accepted
Document Fee
4000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Street Lights Inside Of Unit-2, Market Building In Ward No. 40.
BOQ
| Sl. No. | Item Description |
| 1 | Supply & installation of 7 Mtr long internally and externally Hot Dip Galvanized Octagonal pole made up of top dia 70 mm & bottom dia 155 mm and 3 mm thick HT Steel sheet conforming to grade S355JO, E350 with weather proof and vandal resistant pole. Base Plate Size 260X 260X 16 mm thick shall be welded (Inside & outside) with pole shaft, 4 Nos M20X700mm long J Bolt along with Temp plate, 3 Nos Nut & washer, including inbuild JB (Hinged door), containing (SP MCB, Terminal Stud, Backlite Sheet, SS hardwire Etc) (Make- Utkal Galvanizers, Utkarsh, Bajaj/ Crompton/RR Ispat) |
| 2 | Supply & fixing of Hot dip Galvanized 1 Mtr. Long Double arm 50mm bracket suitable for carrying different wattage Street light for Octagonal pole. (Make- Utkal Galvanizers, Utkarsh, Bajaj/ Crompton/RR Ispat). (Arm design given by E-I-C) |
| 3 | Construction of R.C.C foundation for errection of 7 Mtr/ 8 Mtr / 9 Mtr Street light pole |
| 4 | Supply & Fixing of Coil earthing for existing pole. |
| 5 | Supply & laying of following PVC Aluminium armoured XLPE cables insulated ISI marked .(Make- Havells/ Polycab/ KEI / V-Guard/ Gloster)(a) 2cx6sqmm |
| 6 | Supply & laying of 40 mm HDPE pipe for insert of cable laying. |
| 7 | Laying of one number of PVC insulated and PVC sheathed / XLPE power cable of 1.1KV grade of size not exceeding 25 sq.mm direct in ground including excavation, sand cushing, protective covering and refilling the trench etc. as required. |
| 8 | Supply & Installation of 60 Watt ratings Streetlight with batwing spread in grey corrosion free powder coated aluminium pressure die-cast housing (ADC 12). The IP 66 (ingress protection) and IK10 (impact resistance) heat resistance polycarbonate with potted non-dimmable electronic driver should deliver an operating input voltage range of driver (volts) 140-275 VAC , Operating input frequency range of driver ( Hz) 50 Hz-60 Hz, Operating Temperature-10°C to 55°C, Driver Power Factor ≥ 0.90, Driver THD ≤10%, Driver efficiency≥90% and an inbuilt surge protection of 5KV and additional surge protection of 20 KV/10KA with working humidity range should be 0-95%. The streetlight should come with LEDs of CREE/Osram/Lumiled make with a LED Chip level efficacy of at least ≥190 lumens per watt and a system efficacy ≥ 150 lumens per watt with a CRI ≥70(±2) and CCT of 5700K -6500K (IESNA tolerance). The UV resistant polycarbonate 120° lens should provide a focused photometry to provide uniform lighting. The LED life span should be ≥50,000 Hours, Higher voltage Auto Cut- off ≥320 VAC with Phase-to-Phase sustainability of 8 Hours with short Circuit Protection and Reverse Polarity Protection. LED streetlight must have BS Certification. The fittings should be connecting through a 3 C Cup. Cable i.e, R Y E Connection Options. Minimum Warranty of the fitting should be 5 year & the company should be maintain 7 year spare in Bhubaneswar service centre. (Make-Havells/ Cromption/ wipro/ Philips) (As per direction of E-I-C) |
| 9 | Supply & laying of following Copper unarmoured XLPE cables insulated ISI marked. (Make- Havells/ Polycab/ KEI / V-Guard/ Gloster). (a) 3cx1.5sqmm |
| 10 | Supply & installation of 40 A electronic Timer ON/OFF switch for automatic street light control with box (Make-L&T, Crompton, GIC) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 21, 2026
11:30 IST
Tender Published
Tender notice published.
TodayDec 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysDec 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender