Public Administrative Department Local Bodies Closing in 10 days TDR #58652278

Tender For Provision Of Street Light On Median Of Road From Jagannath Ashram To Badagada High School.

Issued by Local Bodies · Khordha, Odisha
Tender Value
37.55 Lakhs
Estimated cost
Bid Submission
02 Dec 2026
10 days left
EMD
37600
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Provision Of Street Light On Median Of Road From Jagannath Ashram To Badagada High School.

BOQ

Name of Work:- Provision of Street Light on median of road from Jagannath Ashram to Badagada High School.
Sl. No. Item Description
1Supply & installation of 8 Mtr long internally and externally Hot Dip Galvanized Octagonal pole made up of top dia 90 mm & bottom dia 190 mm and 3 mm thick HT Steel sheet conforming to grade S355JO, E350 with weather proof and vandal resistant pole. Base Plate Size 300X300X20 mm thick shall be welded (Inside & outside) with pole shaft, 4 Nos M24X850mm long J Bolt along with Temp plate, 3 Nos Nut & washer, including inbuild JB (Hinged door), containing (SP MCB, Terminal Stud, Backlite Sheet, SS hardwire Etc) (Make- Utkal Galvanizers, Utkarsh, Bajaj/ Crompton/RR Ispat)
2Supply & fixing of 48.4MM OD HDG Double Arm bracket (1.5 Mtr Long) suitable for carrying different wattage Street light for Octagonal Pole/ Tubular Pole. (Make- Utkal Galvanizers, Utkarsh, Bajaj/ Crompton/RR Ispat)
3Foundation for 8 Mtr Octagonal poleSpecification:-(a) Earth work in excavation of foundation in hard soil within 50m initial lead & 1.5 M initial lift including rough dressing and levelling the bed and depositing the excavated materials away from the working areas as directed by the Engineer-in-Charge. (b) Quarrying, collecting, supplying, filling sand from local area with all leads, lifts and delifts or by mechanical means including cost and conveyance of all materials etc. and spreading the same in layers not exceeding 0.30 mtr. depth for compaction as per direction of Engineer-in-Charge (c) P.C.C of (1:3:6 ) with 40 cm down H.G.C.B metal including hoisting, laying, compacting, curing and watering etc. with all T & P required for the work including cost conveyance royalty and all other taxes of materials complete in all respect as per Engineer-in-charge. (d) R.C.C. M-25 with 20 mm. downgraded black hand granite crushed broken stone chips including cost and conveyance of all materials with all taxes, royalty, labour and T&P required for the work etc. complete as directed by the Engineer-in-Charge. (e) Supply M.S reinforcement for R.C.C.work including cutting, bending, binding and straightening with cost conveyance, labour, T &P, all taxes of M.S. rod including cost of binding wire 18 to 20 gauge. (f) Rigid and smooth cantering and shuttering for R.C.C. work including false works and dismantling them after casting including cost of materials complete in ground floors.R.C.C. foundation, plinth band footing base of column. (g) 16 mm thick cement plaster in cement mortor (1:6) over brick masonry including cost and conveyance of all materials with all the taxes, royalty, labour, T & P required for the work materials etc. complete as directed by the Engineer-in-charge. (h) Priming one coat with approved Water bound cement primer including cost of Primer. (i) Finishing walls with water proofing cement paint of approved shade in new work two coats to give an even shade including cost of paint.
4Supply & fixing of coil earthing for existing pole.
5Supply & Installation of 120 Watt ratings Streetlight with batwing spread in grey corrosion free powder coated aluminium pressure die-cast housing (ADC 12). The IP 66 (ingress protection) and IK10 (impact resistance) heat resistance polycarbonate with potted non-dimmable electronic driver should deliver an operating input voltage range of driver (volts) 140-275 VAC , Operating input frequency range of driver ( Hz) 50 Hz-60 Hz, Operating Temperature-10°C to 55°C, Driver Power Factor ≥ 0.90, Driver THD ≤10%, Driver efficiency≥90% and an inbuilt surge protection of 5KV and additional surge protection of 20 KV/10KA with working humidity range should be 0-95%. The streetlight should come with LEDs of CREE/Osram/Lumiled make with a LED Chip level efficacy of at least ≥190 lumens per watt and a system efficacy ≥ 150 lumens per watt with a CRI ≥70(±2) and CCT of 5700K -6500K (IESNA tolerance). The UV resistant polycarbonate 120° lens should provide a focused photometry to provide uniform lighting. The LED life span should be ≥50,000 Hours, Higher voltage Auto Cut- off ≥320 VAC with Phase-to-Phase sustainability of 8 Hours with short Circuit Protection and Reverse Polarity Protection. LED streetlight must have BS Certification. The fittings should be connecting through a 3 C Cup. Cable i.e, R Y E Connection Options. Minimum Warranty of the fitting should be 5 year. (Make-Havells/ Cromption/ wipro/ Philips) (As per direction of E-I-C)
6Supply and fixing of 6Amp to 32A rating 240 V/415 V \\"C\\" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. (Make- Havells/ L&T/ C&S)(a) 6 to 32 SP MCB
7Supply & laying of following Copper unarmoured XLPE cables insulated ISI marked. (Make- Havells/ Polycab/ KEI / V-Guard/ Gloster)(a) 3cx1.5sqmm
8Supply & laying of following PVC Aluminium armoured XLPE cables insulated ISI marked .(Make- Havells/ Polycab/ KEI / V-Guard/ Gloster)(a) 4cx16sqmm
9Supply & laying of 40 mm HDPE pipe for insert of cable laying.
10Laying of one number of PVC insulated and PVC sheathed / XLPE power cable of 1.1KV grade of size not exceeding 25 sq.mm direct in ground including excavation, sand cushing, protective covering and refilling the trench etc. as required.
11Supply & installation of 70 A electronic Timer ON/OFF switch for automatic street light control with box (Make-L&T, Crompton, GIC) Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58652278
AUTHORITY Local Bodies
TENDER VALUE 37.55 Lakhs
LAST DATE 02-12-2026
Authority
Authority Name Municipal Bodies
Work Description Tender for Provision Of Street Light On Median Of Road From Jagannath Ashram To Badagada High School.
Basic Detail
Tender No BMC-EE-Tender Cell-96/2026-27 dt. 18.11.2026
Bidding Type Tender
Location
City Khordha
State Odisha
Key Dates
Publish Date 21 Nov 2026
Submission Date 02 Dec 2026
Open Date 02 Dec 2026
Finance
Tender Value 37.55 Lakhs
Tender Fee 6000
EMD 37600
Exemption Available
Document List
29847f4d-cf7e-4266-9963-c1f45fa5d772.html
BOQ_622364.xls
DTCN_96.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 21, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 02, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 10 days
Dec 02, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 10 days

Tender Documents

Download All (ZIP) ↓
html

29847f4d-cf7e-4266-9963-c1f45fa5d772.html

xls

BOQ_622364.xls

pdf

DTCN_96.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender