Agriculture Government Departments Closing in 10 days TDR #58651349

Tender For Construction Of Confrence Hall Of Cooperative Sugarcane Development Society Limited Fardhan Distt- Lakhimpur (U.P)

Issued by Government Departments · Kheri, Uttar Pradesh
Tender Value
26.61 Lakhs
Estimated cost
Bid Submission
01 Dec 2026
10 days left
EMD
2.67 Lakhs
Bank guarantee accepted
Document Fee
2270
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Kheri → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Construction Of Confrence Hall Of Cooperative Sugarcane Development Society Limited Fardhan Distt- Lakhimpur (U.P)

BOQ

Name of Work:- CONSTRUCTION OF CONFRENCE HALL OF COOPERATIVE SUGARCANE DEVELOPMENT SOCIETY LIMITED FARDHAN DISTT- LAKHIMPUR (U.P)
Sl. No. Item Description
1Earth work in exacavation in foundations in ordinary soil (loam clay or sand) including lift upto 1.5 m and lead upto 30 mt. & including filling, watering and ramming of excavated earth into the trenches or into the space between building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the E/I upto a distance of 30 mt. from the foundation trenches.
2Filling of earth in plinth in 20cm layer including leveling, dressing and watering and also including of supply of earth including carted loading & unloading as per direction of Engineer incharge..
3Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8.00Kms. From the site of work including watering, dressing etc. labour & T &P etc. required for proper completion of work .
4Cement Concrete with 4 cm gauge approved stone ballast approved coarse sand cement in the proportion of 8:4:1 including supply of all material T&P etc. required for proper completion of work
5Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and alround the coloumn pitswall tench basement excavation top surface if plinth filling junction of wall and floor along the external perimer of binding expansion joints,surrounding of pipes and conduits etc.complete(plinth area of the building at ground floor only shall be measured as per I.S.6313(Part ll 1981) aldrine emulsifiable concrete or any other approved material such as hepthachlor or chlordance will be used. The rate of application of chemical emulsion shall be as follows:- (1) treatment for masonary & foundation 5 litres per sq.m. (2) back fill in immediate contract with foundation 7.5 litre per sq.m (3)treatment of top surface of plinth filling 5 liters per sq.m. (4) treatment of soil along external parameter of building 7.50 lire per sq.m.
6R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in Plinth Beam / Lintel supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour, T & P etc. required for proper completion of the works. strength of the concrete shall not beless than M-20.
7R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in Slab supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour, T & P etc. required for proper completion of the works. strength of the concrete shall not beless than M-20.
8R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in Lintel Beam supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour, T & P etc. required for proper completion of the works. strength of the concrete shall not beless than M-20.
9R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in Footing supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour, T & P etc. required for proper completion of the works. strength of the concrete shall not beless than M-20.
10R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in Column supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour, T & P etc. required for proper completion of the works. strength of the concrete shall not beless than M-20.
11TMT Fe-500 Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.
12M-150 brick work in 1:6 cement and coarse sand of 2.25 fineness modulus) mortar in foundation & plinth including supply of all materials, labour, T & P etc required for proper completion of the work.
13M-150 brick work in 1:6 cement and coarse sand of 2.25 fineness modulus above but in super-structure above plinth level up to floor two level ( up to two storeys ) including necessary cutting and moulding of brick work as required and also including honeycombed brick work in thickness of wall more than 12cms.
14Class- 150 (Non Modular brick work tn 1:4 cement and coarse sand in foundation and plinth including supply of N materials, labour and T&P etc. required fo proper completion of the work. (Coarse Sand not less than 2.25 FM) in superstructure, 115 mm wide
15Providing & applying a coat of residual petroleum bitumen of grade ofVG-10 of approved quality using 1.7kg per square metre on damp proofcourse after cleaning the surface with brushes and finally with apieceof cloth lightly soaked in kerosene oil
1615 mm thick plaster with cement mortar in proportion of 1:4 cement & coarse sand.
1712 mm cement plaster in single coat on fair side of single or half brick wall for interior plastering up to floor two level including brick wall for interior plastering upto floor two level including internal rounded angles chamfers, and / or rounded angles not exceeding 80 mm in girth and finished even and smooth No. extra for mixing any additive. 1 cement : 6 Course sand
1815 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. 1 cement : 6 Course sand
19Making grooves 10 to 12 mm wide x am deep in plaster of the walls or in ceiling vertically or horizontally as required.
20Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm
2115 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with afloating coat Providing and laying vitrified floor tiles withou lean concrete in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.of neat cement on the rough side of single or half brickwall.
22Supply and fixing 6mm thick china white glazed tiles in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials, labour and tool sand plants etc.
23Door / windows & Staircase grill.
24Z-Section windows ( Openable)
25Providing wood work in frames of doors, windows, clerestory windowsand other frames, wrought framed and fixed in position with hold fastlugs or with dash fasteners of required dia & length (hold fast lugs ordash fastener shall be paid for separately
26Hold fast
27(a) Door chaukhats
28(b) Window chaukhats
29(c) Ventilator chaukhats
3035 mm thick Single leaf
31Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete.
32(i) stainless steel
33(i) 300 mm long
34screws 100 mm long.
35Providing and fixing unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter
36110 mm
37110 mm bend
38110 mm Shoe
39110 mm
40Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
41Painting two coat over priming coat (but including cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as LUXOL3,Hi-gloss apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work.
42Same as item no. 16 above but for wooden painting.
43Ground floor
44Ground floor
45Ground floor
46Ground floor
47Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying after surface preparation, first layer of slurry of cement @0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm
48Providing & fixing glass panes with putty and glazing clipsin steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes.
49Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).Ordinary cement without any pigment
50Suspended floors, roofs, landings, balconies and access platform. with water proof ply 12 mm thick.
51Lintels, beams, plinth beams, girders, bressumers and cantilevers. with water proof ply 12 mm thick
52COST FOR ELECTRICAL WORKS
53COST OF PLUMBING WORKS
54COST OF BORING
55COST OF SEPTIC TANK
56COST OF SITE DOVELOPMENT along with paerapets to allow unhindered longitudinal (as per sheer attached Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58651349
AUTHORITY Government Departments
TENDER VALUE 26.61 Lakhs
LAST DATE 01-12-2026
Authority
Authority Name Cane Development And Sugar Industry
Work Description Tender for Construction Of Confrence Hall Of Cooperative Sugarcane Development Society Limited Fardhan Distt- Lakhimpur (U.P)
Basic Detail
Tender No 334/c/nirman/date 18-11-2026
Bidding Type Tender
Location
City Kheri
State Uttar Pradesh
Key Dates
Publish Date 21 Nov 2026
Submission Date 01 Dec 2026
Open Date 02 Dec 2026
Finance
Tender Value 26.61 Lakhs
Tender Fee 2270
EMD 2.67 Lakhs
Exemption Not Available
Document List
BOQ_2300915.xls
f742fb17-d7fc-4599-9522-23692a6cfb51.html
Tendernotice_1.pdf
Tendernotice_2.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 21, 2026
11:30 IST

Tender Published

Tender notice published.

Today
Dec 01, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 10 days
Dec 02, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 11 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_2300915.xls

html

f742fb17-d7fc-4599-9522-23692a6cfb51.html

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender