Tender For Construction Of New Office Building Of Assistant Labour Office (Alo) At Nilgiri Under The Labour & Esi Department For The Year 2026-27.
Tender Value
1.55 Crore
Estimated cost
Bid Submission
05 Dec 2026
13 days left
EMD
1.56 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baleshwar → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of New Office Building Of Assistant Labour Office (Alo) At Nilgiri Under The Labour & Esi Department For The Year 2026-27.
BOQ
| Sl. No. | Item Description |
| 1 | CIVIL PORTION OF THE WORK:- Earth work in excavation of fondation in hard soil within the initial lead & lift including dressing & levelling the bed & depositiong the excavated earth away from the site etc. all complete as per the direction of Engineer in Charge. |
| 2 | Supplying all materials, Labour and T&P for filling in foundation and plinth with sand watered and rammed etc. all complete as per the direction of the Engineer-in-charge. |
| 3 | Providing Plain Cement concrete of proportion (1:3:6) in foundation and floors using 4cm (1 ½”) size clean hard black crusher broken granite stone metal of approved quality and from approved quarry including hoisting, ramming, watering, curing etc. complete including cost, conveyance, royalties and taxes of all materials with all labour, cess and T&P required for the work etc. complete in all respect. |
| 4 | Fly ash brick masonry in cement mortar (1:6) in foundation and plinth using K.B. bricks of 25cm x 12cm x 8 cm size having a crushing strength of not less than 75 kg/cm2 with dimensional tolerance + 8% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing including cost, conveyance, royalties and taxes of all materials with all labour, cess and T&P required for the work complete in all respect in all floors. |
| 5 | Building (G.F) & Compound Wall |
| 6 | Building (F.F & S.F) |
| 7 | R.C.C. work of M-20 grade with 20mm and down graded Black hard granite crusher broken stone chips of approved quality from approved quarry including hoisting, lowering and laying concrete in layers, watering, curing etc. complete including cost, conveyance, royalties and taxes of all materials with labour, cess and T&P etc. required for the work complete. |
| 8 | R.C.C. work of M-20 grade with 20mm and down graded Black hard granite crusher broken stone chips of approved quality from approved quarry including hoisting, lowering and laying concrete in layers, watering, curing etc. complete including cost, conveyance, royalties and taxes of all materials with labour, cess and T&P etc. required for the work complete. |
| 9 | Ground Floor |
| 10 | Colum up to foundation |
| 11 | Plinth Beam/Plinth Bend &Window Sill Bend |
| 12 | Column in Superstructure |
| 13 | Lintel |
| 14 | Chajja |
| 15 | Staircase |
| 16 | Roof Slab |
| 17 | Building (First Floor & Second Floor ) |
| 18 | Column in Superstructure |
| 19 | Window Sill Bend |
| 20 | Roof Beam |
| 21 | Lintel |
| 22 | Chajja |
| 23 | Staircase |
| 24 | Roof Slab |
| 25 | Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary steel producers such as SAIL / Tiscon / RINL / JINDAL STEEL / SHYAM STEEL (grade Fe-500D) etc. including bending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge. |
| 26 | Ground Floor,First floor,Second Floor,Compound Wall |
| 27 | Fly ash brick masonry in cement mortar (1:6) in Super Structure using K.B. bricks of 25cm x 12cm x 8 cm size having a crushing strength of not less than 75 kg/cm2 with dimensional tolerance + 8% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing including cost, conveyance, royalties and taxes of all materials with all labour, cess and T&P required for the work complete in all respect in all floors. |
| 28 | Ground Floor |
| 29 | 12mm (½”) thick cement plaster (1:6) finished smooth to outside smooth surface of brick walls after raking out the joint including watering and curing with cost, conveyance, royalties and taxes of all materials with all labour and T&P required for the work etc. complete in all respect. |
| 30 | Out Side Wall Surface (Long Wall) |
| 31 | Inside Wall |
| 32 | First Floor and Second Floor |
| 33 | Out Side Wall Surface (Long Wall) |
| 34 | Inside Wall |
| 35 | Providing 6 mm thick cement plaster to the RCC surface in ceilings in cement mortar (1:4) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc. complete as per direction of the Engineer-in-charge. |
| 36 | Ground Floor |
| 37 | First Floor and Second Floor |
| 38 | Supplying, Fitting & fixing of MS Grill in windows & door & Collapsable Gate of approved design including cost of materials, transportation, Fabrication, Labour T&P etc. all complete. |
| 39 | Ground Floor |
| 40 | First Floor |
| 41 | Second Floor |
| 42 | Compound Wall |
| 43 | Supplying ,fitting and fixing of UPVC Sliding Windows with UPVC section including cost of all charges e.t.c all complete. |
| 44 | Ground Floor |
| 45 | & First Floor |
| 46 | Supplying ,fitting and fixing of UPVC Door with UPVC section including cost of all charges e.t.c all complete. |
| 47 | Ground Floor |
| 48 | First Floor |
| 49 | Supplying ,fitting and fixing of FRP Doors with Plastic section including cost of all charges e.t.c all complete. |
| 50 | Ground Floor |
| 51 | First floor |
| 52 | Supplying ,fitting and fixing of Dressed Seasoned sal wood Choukath for Door & Windows including cost of all charges e.t.c all complete. |
| 53 | Supplying ,fitting and fixing of Factory made 30mm/32mm flush door shutter (nonsal hard wood framefixed with 4mm BWR ply on both side of frame) with all labour, iron fittings, and wooden hinged cleats etc fitted and fixed complete in all respect |
| 54 | Supplying ,fitting and fixing of Alluminium Doors with Alluminium section including cost of all charges e.t.c all complete. |
| 55 | Ground Floor And Security Room |
| 56 | Supplying ,fitting and fixing of Vetrified tiles in floor & tread of steps over 25mm thick cement mortar including cost of all charges e.t.c all complete. |
| 57 | Ground Floor |
| 58 | First floor |
| 59 | Supplying ,fitting and fixing of Ceramic tiles in floor over 25mm thick cement mortar including cost of all charges e.t.c all complete. |
| 60 | Ground Floor |
| 61 | First floor |
| 62 | Supplying ,fitting and fixing of Chequered tiles in floor over 20mm thick cement mortar including cost of all charges e.t.c all complete. |
| 63 | Supplying ,fitting and fixing of Industrial tiles in floor over 20mm thick cement mortar including cost of all charges e.t.c all complete. |
| 64 | Finishing wall surface of walls with cement based wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffodling staging charges with cost of all materials, taxes, labour, T&P etc. complete. |
| 65 | Ground Floor |
| 66 | First Floor |
| 67 | Second Floor |
| 68 | Wall painting one coats with wall cement primer (water bound) etc complete with all cost. |
| 69 | Ground Floor |
| 70 | First Floor |
| 71 | Second Floor |
| 72 | Compound Wall |
| 73 | Painting two coats with any approved quality & shade of Plastic emulsion painrt over a coat of primer including cost of all charges e.t.c. all complete. |
| 74 | Ground Floor |
| 75 | First Floor |
| 76 | Second Floor |
| 77 | Compound Wall |
| 78 | Painting two coats to iron work with Enamel paint over a coat of red oxide primer including all labour T & P all complete. |
| 79 | Ground Floor |
| 80 | First Floor |
| 81 | Second Floor |
| 82 | Compound Wall |
| 83 | Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @0.90mtr. C/C and stainless square pipe barracking of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect. |
| 84 | Ground Floor |
| 85 | First Floor |
| 86 | PH PORTION OF THE WORK:- Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor pvc pipes confirming to C-PVC / ASTM-D- 1785/89 (Sch-80) and pipe fittings of the following nominal borewith clamps including making good the wall , ceiling and floor, testing all complete as per specification and direction of the Engineer in charge. In Ground Floor 20 mm dia C-PVC Pipe |
| 87 | 25 mm dia C-PVC Pipe |
| 88 | 32 mm dia C-PVC Pipe |
| 89 | First Floor |
| 90 | 20 mm dia C-PVC Pipe |
| 91 | 25 mm dia C-PVC Pipe |
| 92 | 32 mm dia C-PVC Pipe |
| 93 | 40 mm dia PVC(Sch-80) Pipe |
| 94 | Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar ( 1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge. In ground Floor - 250mm thick wall |
| 95 | First Floor - 250mm thick wall |
| 96 | Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge |
| 97 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per the direction of the Engineer in charge. In Ground Floor |
| 98 | First Floor - |
| 99 | Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge |
| 100 | Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 101 | Supplying all materials,labour,T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 1st class Fly ash brickwork in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 2.60m average length in cement concrete(1:2:4) using 12mm size h.g chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge. Fixing 2000 Ltr Roto-moulded water storage tank (Syntax Make) 3 layer on the roof of G floor |
| 102 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer in charge. (Fixtures make of Brass / G.M / C.P fittings are to be pre-approved by the E.I.C) .15mm dia CP Long body bib cock (Jaguar-ARI-CHR-39021) |
| 103 | 15mm dia CP angle stop cock (Jaguar-KKUP-CHR-35053PM |
| 104 | 20mm dia CP Concealed stop cock (Jaguar-FLR-MCH-5089N) |
| 105 | 15mm dia CP two Way bib cock (Jaguar-FUS-CHR-29041) |
| 106 | 15mm dia Jaguar (Health Faucet) with 8mm Dia,1.2 Meter Long Flexible CP Tube & Wall Hook ALD CHR -573 |
| 107 | 32mm dia C.P. Coat Hook (Double) (As per Cat. No. ACN-CHR-1161N of Jaquar) |
| 108 | 25mm dia Brass or G.M. Full way Valve |
| 109 | 32mm dia Brass or G.M. Full way Valve |
| 110 | 40mm dia Brass or G.M. Full way Valve |
| 111 | 15mm dia Extension Piece |
| 112 | 15mm dia CP Flange |
| 113 | 125mm dia. CP grating |
| 114 | 15mm dia C.P Pillar cock(CON-CHR-021KN) |
| 115 | 32mm dia PVC waste pipe with brass coupling nut |
| 116 | Sink cock -jaguar cat no. FLR-CHR-5347N |
| 117 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method /as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge. |
| 118 | 110mm diameter U-PVC SWR pipes (Asirvad / Supreme Make) |
| 119 | 75mm diameter U-PVC SWR pipes (Asirvad / Supreme Make) |
| 120 | 110mm dia U-PVC plain Bend |
| 121 | 110mm dia U-PVC Door bend |
| 122 | 110mm dia U-PVC Door Tee |
| 123 | 110mm dia U-PVC Door cross Tee |
| 124 | 110mm dia U-PVC plain Tee |
| 125 | 110mm dia socket plain |
| 126 | 75mm dia socket plain |
| 127 | 110mm dia plain shoe bend |
| 128 | 75mm dia plain shoe bend |
| 129 | 110mm dia U-PVC Offset without ear |
| 130 | 110mm dia U-PVC Cowl |
| 131 | 110mm dia P-trap |
| 132 | Supplying all materials, labour, T&P and fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification and direction of the Engineer in charge.Cascade dual flushset EWC (Hindware)No.92099 |
| 133 | European water closet with ‘S’ trap plain (Parryware/Hind ware/Cera) |
| 134 | Matrix Set -1 (WB 65 x 35 with one pair mounting brackets, EWC & Cistern complete with fittings & seat cover, one no hinged rail 76 cm and five nos of grab rails 60 cm) |
| 135 | supplying all materials, labour, T&P and fitting and fixing 10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge. 10 litres capacity PVC LL cistern (Slimline-Deluxe-white-Parryware make) |
| 136 | Supplying all materials ,labour ,T&P and fixing Wash basin with hole for pillar taps with cast iron or MS brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. fixing pedestral for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin , fixing 12mm dia CP brass waste etc.all complete as per specification and direction of Engineer-in-charge.I.530x460x400mm size Wall Hung Integrated Basin with all Accessories (Jaguar Cat No. OPS-WHT-15803) |
| 137 | Supplying all materials ,labour ,T&P and fixing wash kitchen sink with outlet at end and weir overflow including fitting and fixing a pair of cast iron or MS brackets painted white, fixing 50mm/40mm dia CP brass waste , fixing 50mm/40mm dia PVC waste pipe 910mm long with supply of wooden plugs, screws and cement etc. including cutting holes in walls and making good the damages etc.all complete as per specification and direction of Engineer-in-charge.600x450x250 mm stainless steel kitchen sink with drain board-glossy-IS:13983 - 1994 (Jayna make) |
| 138 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted minimum 5m thick on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the Engineer in charge.Design Mirror(Parryware make) |
| 139 | Supplying all materials ,labour ,T&P and fitting and fixing CP shower with 15mm or 20mm inlet including polishing etc.all complete as per specification and direction of Engineer-in-charge. OVERHEAD SHOWER 240 x 240MM SQUARE SHAPE SI (Cat no. OHS-ABR-1629GB of Jaguar) with Shower Armm 600x25x25mm square flange (Cat no. SHA-CHR-455l600 of Jaguar)MAZE OVERHEAD SHOWER 240X240mm SQUARE SH |
| 140 | Supplying all materials,labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge.CP TOWEL RING SQUARE (Jaguar, Cat no- ACN-CHR-1121N) |
| 141 | GLASS SHELF 600X120MM LONG with CP/NP guard rails (Jaguar, Cat no- ACN-CHR-1171NW120) |
| 142 | TOWEL RAIL 600MM LONG, STAINLESS STEEL(Jaguar, Cat no- ACN-CHR-1111NM) |
| 143 | Supplying all materials ,labour ,T&P and fixing CP Soap Holder complete with CP brass brackets fixed to wooden plugs with chromium plated brass screws etc.all complete as per specification and direction of Engineer-in-charge. |
| 144 | CP soap holder(Jaguar, Cat no-ACN-CHR-1131N) |
| 145 | Supplying all materials,labour ,T&P and filling in foundation and plinth with sand well watered and rammed including cost, conveyance of all materials to work site ,payment of royalty,taxes etc. all complete as per direction of the Engineer-in -chargeIn ground floor |
| 146 | Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. G.F |
| 147 | Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size crusher broken hard black granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.(a) Ground floor |
| 148 | First floor |
| 149 | Providing vitrified tile flooring using Matt vitrified tiles having thickness of 8mm to 10mm conforming to IS 13756 of 600mm x 600mm / 600mm x 300mm Colour & Printed Series (homogeneous) of approved quality of Somany / Kajaria / Asian / Johnson or equivalent in all floors at all height on 25mm thick bed of cement mortar of mix (1:1) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with epoxy grout with required quantities of pigments of approved marks to match the shades of the vitrified tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work, complete in all respect as per specification and direction of Engineer-in-charge.Kajaria(600x600mm) (In G.Floor) |
| 150 | First floor |
| 151 | Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. G.F |
| 152 | First floor |
| 153 | Supplying, fitting & fixing of Ceramic wall tiles of premium grade of size 600x300mm having thickness 6.5mm to 6.7mm confirming to IS 13753 in dadoes, skirting and risers of steps laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge. Kajaria(600x300mm) (GF) |
| 154 | First floor |
| 155 | Supplying all materials, labour, T&P and providing Granite Plate , treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge.Pantry room |
| 156 | Finishing wall surface of walls with Acrylic wall putty (Water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete.G.Floor |
| 157 | First floor |
| 158 | Supplying all materials, labour, T&P and providing cement washing 2 coats including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. |
| 159 | First floor |
| 160 | Supplying all materials, labour, T&P and distempering two coats to walls with distemper of approved shade on new work to give an even shade etc all complete as per specification and direction of the Engineer in charge. |
| 161 | First floor |
| 162 | Supplying and fitting-fixing of Un-plasticised Poly Vinyl Chloride (UPVC) (FENESTA / NCL VEKA LTD) Casement Toilet Door – 60- Series duly manufactured using UPVC reinforced profiles of 60 mm x 55 mmx2.5 mm for outer frames, 102 mm x 60 mm x 2.25 mm for casement Door Sash Profile and 74 mm x 60 mm x 2.5mm mullion profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 2.0 mm prefabricated & welded through fusion welding.The Door sash shall be fitted with 12mm thick WPC Board of Greenply make duly fixed with EPDM weathering seal resistant accessories like Bathroom locking system made of aluminium 1 No., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges. The materials and product confirming to ASTM D 638-14, EN-477-95 and other applicable codes and standards. |
| 163 | Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) Pure Chill 80 PSS UV (Eureka Forbes) of size 750x570x1350mm height with water storage capacity 80 liters along with 2 nos of faucets 1 for cold water and 1 for normal water including a flow of 1.5 ltr per minute etc all complete as per approved drawing,specification and direction of the Engineer in charge. |
| 164 | Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, K.B brickwork in c.m (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size C.I grating etc all complete as per approved drawing, specification and direction of the Engineer in charge |
| 165 | Supplying all materials, labour, T&P and constructing inspection chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6),moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge.Inspection chamber Inside size 760mmx760mmx 460mm |
| 166 | Supplying all materials ,labour ,T&P and constructing Man Hole Chamber of inside size 910mmx910mmx910mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , Fly ash brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken black hard granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing, conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-chargeInside size : 910mmx910mmx910mm |
| 167 | Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class K.B brickwork in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size hg chips on bed, 12mm thick cement plaster (1:4) inside and outside over masonry brickwork, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge Brick masonry soakway pit 1.80m dia x 2.60m deep |
| 168 | Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge.110mm dia u-pvc pipe alround concrete |
| 169 | 50 User RCC Septic tank- 1 NosEarthwork in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to minimum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of the Engineer in charge. Initial lift |
| 170 | ……… do ………. with 1st extra lift of 1.50m |
| 171 | Supplying all materials, labour, T&P and providing shoring and shuttering foundation trenches, pits etc with close wooden planks or sheets shuttering etc all complete as per direction of the Engineer in charge. |
| 172 | Supplying all materials, labour, T&P and filling in foundaton and plinth with sand well watered and rammed including conveyeance of all materials to worksite,payment of royalty, taxes etc all complete as per direction of the Engineer in charge. |
| 173 | Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeIn ground floor |
| 174 | Supplying all materials, labour, T&P and providing cement concrete (1:1.5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.In ground floor |
| 175 | Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeIn ground floor |
| 176 | Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling then after casting including cost of materials complete in ground floor.R.C.C beams, columns, girder and bressmer etc--In G.F |
| 177 | R.C.C floor and roof slabs, landings, balconies, projecting sunshades and chajjas up to 4.30m height |
| 178 | Supplying all materials, labour, T&P and providing 6mm thick cement plaster (1:4) on RCC work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeIn ground floor (inside) |
| 179 | Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4)with cement punning and butimen painting including watering,curring and conveyance of all materials to site. |
| 180 | Supplying all materials, labour, T&P and providing cement punning including watering, curring and conveyance of all materials to site. |
| 181 | Supplying all materials, labour, T&P and futting and fixing 20mm dia MS/CI step iron including supply of necessary C.C(1:2:4) for fixing etc complete as per P.H.D. specification. |
| 182 | Supplying all materials, labour, T&P and fitting and fixing S.W.Tee of size 150mx150mx150m as per P.H.D.specification and direction of the E.I.C. |
| 183 | Supplying all materials, labour, T&P and constructing vent base as per P.H.D specification etc all complete. |
| 184 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge. 110mm diameter U-PVC SWR pipes(Supreme/Ashirvad) |
| 185 | 110mm U-PVC cowl |
| 186 | Supplying all materials, labour, T&P for removing the excavated earth by mechanical means etc . |
| 187 | Sinking of ( 200 x150)mm dia bore well - 1 Nos by DTH method . 1nos |
| 188 | Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below first level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only |
| 189 | Drilling of 200mm dia bore |
| 190 | 00 mtr to 45mtr |
| 191 | Labour for drilling of 150 mm dia bore |
| 192 | 45 mtr to 2000mtr |
| 193 | Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from first level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials. |
| 194 | Lowering of 200mm dia P.V.C casing pipes |
| 195 | 00 mtr to 30 mtrs 1x30.00mtr each=30.00mtr |
| 196 | 30 mtr to 60mtr 1x15.00mtr each=15.00mtr |
| 197 | Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber 'O' ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length. |
| 198 | 200mm dia PVC (sch-80) pipe 2x46.00mtr each=92.00mtr |
| 199 | Supplying all materials, labour, T&P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below first level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing . |
| 200 | Cost of Cement |
| 201 | Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge |
| 202 | By DTH Rig |
| 203 | Supplying all materials, equipment, labour & conducting reconnaissance survey, integrated Hydrological and Geophysical (Electrical Resistivity Method) survey & selection of potential source for exploration of first Water including selection and recommendation of site for drilling wells in selected locations in any part of Orissa under the following Geological formation: |
| 204 | qnty. |
| 205 | Supplying all materials, labour, T&P and providing, fitting and fixing vertical submersible pump to run on 3 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, etc all complete as per direction of the Engineer in charge (Texmo/ KSB/Kirloskar make) |
| 206 | Supplying all materials,labour T&P for fitting and fixing of Lubi Make 1.5 hp,220v,50hz,ac supply,2900rpm,Open well submnerssible pump Model:LHL-155CE. Having capacity of 5m3/hr @20m head.Discharge outlet 32mm etc.all complete as per direction of the Engineer-in-charge. |
| 207 | DOL Control panel |
| 208 | 40mm dia steel short piece |
| 209 | Well cap |
| 210 | 50mm size CI bracket |
| 211 | 2.50sqmm flat cable |
| 212 | 20mm dia rigid UPVC pipes |
| 213 | Torchain rope with cover 5 mm ARK |
| 214 | Labour charges for lowering including transportation |
| 215 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceiling and floor all complete as per specific 32mm HDPE pipes (Finolex/Supreme make) wih 10 kg/cm2 |
| 216 | Supplying all materials, labour, T&P and constructing Bore well protection chamber of the inside size 650x650x1000hight with cement concrete (1:3:6) using 40mm size hard granite metal on foundation, 1st class Fly ash brickwork in cement mortar (1:3), with base cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:4) inside and outside, R.C.C cover slab in (1:1.5:3) using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. |
| 217 | EI PORTION OF THE WORK:- Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH/LSZH PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/ Polycab/ HAVELLS/RR KABLE/KEI or equievalant reputed make A catagory ISI marked as approved with 20 mm dia PVC flexible non metallic conduit FRLS type ISI marked Make-AKG/Anchor/Havells or equievalant reputed make A catagory ISI marked as approved 6A modular type (anti bactorial & falme retradant type) switch ISI marked Make-Schneider (Zencelo)/ legrand( Arteor) /Panasonic (vision) or equievalant reputed make & model A catagory ISI marked as approved, and ceiling rose ISI marked Make- Anchor/Havells of modular type G.I box with metallic cover plate (both side) (anti bactorial & falme retradant type) Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision)or equievalant reputed make & model A catagory ISI marked as approved of suitable size, modular box with 1.5 sq. Mm FRLSH PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge.Group-A. L.P.- F.P.- C.B.- |
| 218 | Group-B. L.P.- F.P.- C.B.- |
| 219 | Group-C L.P.- F.P.- C.B.- |
| 220 | Recessed wiring for 5/6Amp modular Socket outlet with 2x1.5mm2 FRLS/FRLSH PVC insualted single core multistand copper conductor of ISI marked in recess 20mm dia Non-metalic PVC flexible conduit with piano type switch,phenolic laminated sheet suitable size ISI marked on modular GI box and earthing point with 1x1.5sqmm FR PVC insulated single core multistand copper conductor for loap earthing etc.as required(make of wire-Finolex/L&T/Anchor/ Havels/V-Guard/Polycab) .Group-A. |
| 221 | On Existing board. |
| 222 | Recess wiring for circuit/submain wiring with the following mentioned size PVC FRLSH/LSZH insulated, copper conductor, single core cable (Finolex/Anchor/Polycab/ HAVELLS/RR KEBLE) or equievalant reputed make A catagory ISI marked as approved, in recessed PVC conduit Heavy duty FRLS of mentioned size (AKG/Anchor/Kinjal or equievalant ISI marked as approved) as required as per direction of Engg.-in-Charge.a)1x1.5mm2(1.19.2.SOR-17) Inverter wiring |
| 223 | b)2 x 1.5 sq.mm + 1 x 1.5 sq.mm(1.19.2.SOR-17) |
| 224 | c)2x2.5mm2+1x1.5mm2(1.8.2.SOR-17) |
| 225 | d)2x4mm2+1x1.5mm2 (1.8.3.SOR-17) |
| 226 | e)4 X 6 sq.mm + 1 X 2.5 sq.mm(1.8.4.SOR-17) |
| 227 | S/F of 20W/18W LED batten light of crompton(slim LINEA /Dazzle ray)/ Havells/ Panasonic or Equivalent make. |
| 228 | S/F of 1200mm sweep energy efficient 5 star rated BLDC Ceiling fan (Make- USHA(Technix)/ Crompton( Energeon Riviera) Regulator or equivalent model of Havells/ Bajaj or other reputed make) with regulator compatible as per direction of Engineer-in-charge. |
| 229 | S/F of 300mm metal exhaust fan with wall cutting including all accessories of USHA(Aero clean)/Bajaj (Bahar) /Crompton (Drift Air) make & connection as per direction of Engineer-in-charge. |
| 230 | Supplying and fixing of stepped type modular regulator of ISI marked(ROMA/Crabtree/L&T/ Legrand)or equivalent make on Modular G.l. box of 18 SWG on surface or in recess with suitable size Modular base & cover module in front including providing and fixing connection, painting etc as required. |
| 231 | S/F of 1x15W 5700K surface /Recessceling LED light made up of pressure die cast housing with secondary optics ,IP66 protection Havells make(TRIM LED/ ENDURA NEO DL SURFACE/INTEGRA NEO SURFACE) /INTEGRA NEO/GRAND/HE/ EDGE PRO ROUND/SQUARE// Crompton( CROM ROUND/SQUARE) OR Equivalent model of Philips make as per direction of Engineer-in-Charge.(Basement-64) |
| 232 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 01 No.s of 6 pin 15/16A modular socket outlet and 15/16 A modular switch & and 01 no. of 5/6 A modular socket outlet and 5/6 A modular switch , connections etc. as required.Modular switches make-Anchor/ Legrand /Roma) (5+15 A switch socket board) |
| 233 | Supplying and fixing Modular G.l. box of 18 SWG on surface or in recess with Modular base & cover for module in front including providing and fixing 6pin 15/16Amp modular socket outlet and SP 15/16Amp oneway modular switch (Power Plug) with indicator connection, painting etc as required. |
| 234 | S/F of suitable size Modular G.l. box for surface or in recess with Modular base & cover in front including providing and fixing of 6pin 15/16Amp modular socket outlet with 20/25AMP SP MCB of (Hager/L&T/ Legrand make) connection, painting etc as required.A.C |
| 235 | Supplying and fixing of Modular G.l. box for suitable module on surface or in recess with Modular base & cover and blanking plate ( if required) in front including providing and fixing of 25AMP DOL starter (ROMA/ Crabtree/Havells make) of modular type switch, connection, painting etc as required as per the direction of Engineer-in-Charge. |
| 236 | Supplying and fixing of Modular G.l. box of 18 SWG on surface or in recess with suitable size Modular base & cover module in front including providing and fixing of Modular Bulbul Callbell of ROMA or Equivalent make with connection, painting etc as required. |
| 237 | S/F of 4 sq.mm 2 Core Alluminium, armoured LT power Cable of XLPE insulated 650/1100 grade(make-Havells/Polycab)(50mtr for street light) |
| 238 | P/F of 8 SWG Copper wire on surface or in recess for loop earthing along with existing surface/recessed conduit/ submain wiring/cable as required (to be run along with cable for earth wire)( (SOR-3.20) |
| 239 | S/F of (4+12) way Double door D. Box (Hager/ L&T/ C&S/Legrand ) with 63Amp FP MCB ,12x(6-32Amp) SP MCB of Hager/ L&T/Legrand/C&S or Equivalent make make including all accessories and connection. as per direction Engineer-in-Charge. |
| 240 | S/F of 10sq.mm 4 Core Alluminium, armoured LT power Cable of XLPE insulated 650/1100V grade ISI mark(make-Havells/Polycab or Equivalent make ) as per direction of Engineer-in-charge. (To be Connected from LDB box to 160A- floor panel ) |
| 241 | S/F of 25sq.mm 3.5 Core Alluminium, armoured LT power Cable of XLPE insulated 650/1100V grade ISI mark(make-Havells/Polycab) as per direction of Engineer-in-charge. (To be Connected from PDB box from 250Am panel of all floor) |
| 242 | S/M of end termination with brass compression gland and Al. lugs for 4 Core 10 mm2 PVC insulated and PVC sheathed/XLPE Al. cable of 1.1kV as per direction of Engineer-in-charge.(DSR2022-9.1) |
| 243 | S/M of end termination with brass compression gland and Al. lugs for 4 Core 25 mm2 PVC insulated and PVC sheathed/XLPE Al. cable of 1.1kV as per direction of Engineer-in-charge.(DSR2022-9.1) |
| 244 | Laying & fixing of one no. PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size on Cable Tray as required. |
| 245 | upto 35 Sqmm(clamped with 1mm thick saddle) |
| 246 | S/f Of 160Amp Floor Panel board size Fabrication of Panel board size 48x36\\"x12\\" with powder coat made out of SWG CR sheet with designing.-1no.,S/F of 200Amp Porcelain Kitkat fuse of ISI marked-3nos .160A , 25kA, On load change over 4pole without cover(Make- ABB/ Hager/ Simens/ schneider)-1no.63A, 4P, 25kA MCCB fixed thermal & fixed magenetic hager/make/L&T/Legrand or Equivalent make .-4.nos,63A, 4P MCB C- Series Legrand / Hager / L&T Make.-2nos.,40A, DP MCB C- Series Legrand / Hager / L&T Make.-2nos,250Amp TPN Cu. Bus bar 35mmx10mm-1set,Digital Voltmeter,Ammeter selector switches CT coil & indicator lamp RYB with toggle switch etc complete. -1Set,Internal wiring of the Panel suitable copper flat 7/20mm2 SC FR copper cable with colour,Transportation charges,Fixing charges of Panel with RCC foundation base with MS Angle nuts & bolts.-1set |
| 247 | S/f Of 64Amp VTPN Panel boardFabrication of Panel board size 36\\"x24\\"x12\\" with powder coat made out of SWG CR sheet with designing. |
| 248 | 63A, 4P, 25kA MCCB fixed thermal & fixed magenetic hager/make/L&T/Legrand or Equivalent make . |
| 249 | Busbar Chamber with copper strip 63A,4way |
| 250 | Digital Voltmeter,Ammeter selector switches CT coil & indicator lamp RYB with toggle switch etc complete. |
| 251 | Internal wiring of the Panel suitable copper flat 7/20mm2 SC FR copper cable with colour. |
| 252 | Internal wiring of the Panel suitable copper flat 7/20mm2 SC FR copper cable with colour. |
| 253 | Fixing charges of Panel with RCC foundation base with MS Angle nuts & bolts.=1 NO. EACH |
| 254 | Lightning Protection :- Supply of 8 mm Aluminum Round Conductor.Tested as per IEC 62561. as per direction of engineer in charge.Make-OBO/Dehn |
| 255 | Supply of Roof conductor holder for parapet- PolyamideConductor holder:With M8 female thread or diameter 7mm, M8Screw to connect the conductor holder.Weather andtemperature resistant from -35 to +90 degree Celsius tested.Conductor holder @ 1 meter distance.Tested as per IEC 62561. as per direction of engineer in charge.Make-OBO/Dehn |
| 256 | Supply of Polyamide roof cable holder for flat roof:DIN 48829 Form B1. Closed form with bottom. Filling weight1Kg (frost-resistant concrete). Sleeve from polyethylene, black@ 1 meter distance. Tested as per IEC 62561. Make-OBO/Dehn |
| 257 | Supply of Connector: For T cross and parallel connectors. Quickinstallation using hexagonal bolt M10X30 high-grade hot dipgalvanised. Tested as per IEC 62561.(2nos/expansion piece ).Make-OBO/Dehn |
| 258 | Supply of 1 mtr vertical air terminal with mounting accessorieson the flat surface to meet the requirements of IS/IEC 62305.Tested for Electrical , mechanical and chemical as per IEC62561. Tested for 100kA lightning current. Make-OBO/Dehn |
| 259 | Supply of Vertical air terminal with accessories:Providing of Air terminals as per IS-IEC -62305 part-3 Nominal size Ø10/16 mm aluminium rod: 3 Mtr Airterminal: semi-hard (E-AlMgSiO5 corresponds to DIN 48801) Suitable for high wind load. Tested as per IEC 62561. Make-OBO/Dehn |
| 260 | Supply for Providing of Stand for Fang Fix system 16 kg with base andclamp ,made up of frost resistant concrete and clamp testedupto 100KA lightning current . Make-OBO/Dehn |
| 261 | Supply for Providing of Stand for Fang Fix system 16 kg made up of frost resistant concrete. Make-OBO/Dehn |
| 262 | Supply of Test Joint (Folding Clamp) suitable to connect 8mmround conductor and max by 30x3 mm GI strip as specified indrawing and directed by Engineer.Tested for 100kA lightning current. Make-OBO/Dehn |
| 263 | Supply of IP 66 Poly Propylene Junction Box. Installation at 1Mtr HeightFor Test Joint .Internal dimensions: 100x100x48 mm Make-OBO/Dehn |
| 264 | Supply of Galvanised Steel Flat 30X3 mm thickness from earthelectrode directly in ground as required. Flat conductor HotDipped Galvanized. Tested as per IEC 62561. Make-OBO/Dehn |
| 265 | Supply for Providing of Cross connector for Flat: Suitable for 30mm Galvanised steel strip. Installed with 4 nos of hexagonal plate. Tested for 100kA lightning current. Make-OBO/Dehn |
| 266 | Supply of flat conductor holder- Fit: FL 30, With mounting hole6.2 x 22 mm, With 2 cylinder bolts M6 x 16 and over-piece fromhot-dip galvanised steel, Bottom section from polyamide, black.Tested as per IEC 62561. Make-OBO/Dehn |
| 267 | Supply for Providing of Plastic Corrosion Protection strip: Approx 1.1 mm thick. Width 50mm. Made of petrolatum- coated chemical fibre fabric. Make-OBO/Dehn |
| 268 | Supply of UL Listed maintenance free ,Low carbon coppercoated earth rod of 3 metre electrode having diameter of 17.2mm with copper coating thickness of 250micron tested as perIEC 62561-2 Make-OBO/Dehn |
| 269 | Supply of universal clamp made of SS to connect rod with flatconductor Make-OBO/Dehn |
| 270 | Supply of Earth conductivity enhancing mineral compound shall be of 25kg/pit tested as per IEC 62561-7,TCLP tested Make-OBO/Dehn |
| 271 | Supply of The above arrangements shall be provided with Heavy dutyearth champer of 5000kg load bearing capacity to ensure thesafety of earthing system Make-OBO/Dehn |
| 272 | S/F of Street light- 90W,120 lm/w efficacy , new generation energy saving & environmental friendly long life versatile pressure die-cast alluminium IP66 roadway luminaire with high power LED as light source with acrylic cover(Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) (5Years Warranty) |
| 273 | Supplying, Erection, Fixing, connection & testing of 40W LED GATE Light of (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) maintenance free having 2 years warranty G.I P ipe with braket including MCB box & including with foundation as per the Drawing for inspection as required & as per direction of Engg.-in-Charge. |
| 274 | Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metallic PVC flexible conduit with 5Amp, 250V Modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular cover of suitable size, MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make of wire-Finolex/Anchor/Havells/V-Guard) Group-A |
| 275 | Group-B |
| 276 | Recessed wiring to submain in the following sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with the following sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required.(Make of wire-Finolex/L&T/Anchor/Havells/V-Guard//HPL) 2 X 1.5 sq.mm +1 X 1.5 sq.mm -do- |
| 277 | 2 X 2.5 sq.mm +1 X 1.5 sq.mm -do- |
| 278 | Wiring to sub main with 1 x 2.5 sqmm single core multistrand copper wire for inverter wiring (1.19.11A) |
| 279 | Supply and fixing of 6Amp plug with 6Amp switch on existing board (Modular type) |
| 280 | Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type)((anti bactorial & flame retradant type)) with suitable size modular box & cover(anti bactorial & falme retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge. |
| 281 | S/F of 5 step type Modular electronic Fan Regulator ISI Marked with all connection complete in all respect as per direction of Engineer in charge (Make: legrand Myrius /Schneider(Zencelo)/Panasonic(Vision)) |
| 282 | S/F of A.C point consisting of 32Amp DP MCB and stator with all connection complete in all respect as per direction of Engineer in charge (Roma/Legrand ) |
| 283 | Supplying and installation of 25A AC starter Modular type, Schneider/Siemens/Legrand coil voltage-230 Volt A.C. on mod Box of suitable size including modular coveras required as per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 284 | Supply and fixing of superior type Ding Dong call bell / buzzer of ISI marked, on 6\\" X 4\\" conforming to IS-2268/1994 and bell push of ISI marked , conforming to IS-1293/ 1988 (make-Cona/ Anchor) |
| 285 | S/F of Exhaust fan 10\\"/12\\" size. (Make-Havells/Usha/Almonard/Orient) |
| 286 | Providing and fixing of following capacity TP & N MCB switch unit inside the existing mcb distribution box including drilling holes in the box making connections, etc as required .( MAKE-Legrand/Seimens/schneider/L & T) 63 Amp TP & N MCB |
| 287 | Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour ceiling fan with aluminium blades having wattage not more than 28W and air delivery ≥215m3/min Make-Crompton Energion Groove /Havells Efficiencia Neo/Usha Technix ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor ( With Regulator and Down Rod) |
| 288 | SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2200 lumen complete with electronic driver and all other accessories withdiffuser having 5 years warranty i/c connection etc as required as per direction of Engg.-in-Charge |
| 289 | Supply and fixing of copper plate earthing 600 X 600 X 3.15mm 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having locking arrangement and watering pipe etc with charcoal and salt as required. |
| 290 | Supply and laying of 25mm X 6 mm CU earth strip ISI marked at 0.5 meter below ground level as strip earth electrode including soldering etc. as required. |
| 291 | Construction of Lift Room(L.S) |
| 292 | Design, Supply, Installation, Testing & Commissioning and putting into operation with Comprehensive Maintenance including spare parts for a period of 5 years.Inspection by concerned electrical inspector, Director Factory and Boilers, Odisha with proper testing certificate and final testing of Automatic Lift complete with all standard equipments accessories and control equipments as per Manufacturer's Design with lift control panel as per BIS and fulfilling following requirements.It includes supply,laying of power cable and fixing of glands,lugs etc.( Machine room type, Gear Type).Design and as per CPWD /OPWD specification (Part - III Lifts) 1981 with valid lisence for installation and fulfilling following requirements on turnkey basis as per direction of Engg.-in-Charge. LIFT OF machine room type(Make-Kone/Johnson/OTIS/Schindler/Thyssenkrrup or equievalant Govt. Of Odisha Approved reputed make & model A catogory, ISI marked as approved ).Warrentee period of accessories & system must be 5 years & compelete test certificate must be submitted along with Lift component list . Type: PASSENGER LIFT, Load: 10 PASSENGER(680 KG),Speed: 1.0 Meter Per Second.Control: Variable voltage with variable frequency,Operation: Microsprocessor based simplex collective selective with / without Lift Attendant.Total Rise: About 9 Meters. ,Machine type & location: Gearless machine in machine room located directly above the lift well. |
| 293 | Supply,Installation,Testing & Commissioning of Electric Motor Driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) 450LPM at 35Mtr head. |
| 294 | Supply, Erection,Commisioning & Testing of Weather Proof control auto start panel for pump. |
| 295 | Supply, Installation,Testing & Commissioning of Stainless Steel Hydrant Valve/Landing valve of 63mm NB size, Type-A single headed oblique type, as per IS-5290/93 and as per direction of Engineer-in-charge. |
| 296 | Supply, Installation,Testing & Commissioning of SS short branch pipe with 63mm male inlet and 19mm outlet nozzle, as per IS-903 and as per direction of Engineer-in-charge. |
| 297 | Supply, Installation,Testing & Commissioning of 63mm NB and 2nos of 15/1 no of 30mtr long RRL Fire Hose fitted with 2nos 63mm instantaneous stainless steel male & female SS coupling complete by GI wire binding for internal Hydrant as per direction Engineer-in-Charge. |
| 298 | Providing Supply & installation of MS Hose Box for suitable size (750X600X250mm) to accommodate 2nos of 15/1 no of 30mtr long fire hose and a branch pipe, all mounted type as per Engineer-In-Charge. |
| 299 | Supply, Installation,Testing & Commissioning of Swinging Pattern wall fixing first Aid hose reel made from MS sheet and Waterways and moving parts with robber hose of 20mm dia amd 30mtrs long with ABS(Plastic) shut-off nozzle as per IS-444/IS-12585 Type-I, complete with all accessories as per direction of Engineer-in-Charge. |
| 300 | Providing,Fitting &Fixing of C.I. 25MM single air relief valve with stop cock confirming to IS-14845/2000 with ISI mark for water works purpose including fixing the same with hydrant riser including testing & commissioning the system etc. all complete as per approved specification & direction of Engineer-In-Charge. |
| 301 | Providing,fitting & fixing of 4-Way GM fire brigade connection consisting of 63mm dia instastaneous type male coupling with built-incheck valves, 150mm dia flanged outlet complete with bolts,nuts & rubber insertons confirming to IS:904 with ISI mark including testing & commissioning the system etc. all complete as per approved specification & direction of EIC. |
| 302 | Supply, Installation,Testing & Commissioning of C class heavy duty MS pipe (as per IS-1239 upto 150mm NB and IS-3589 for above 150mm 6mm thick)with flanges and fitting such as bends, tees, reducers, robber insertion and Galvanized Nuts & Bolts of followng size on surface along wall/Shaft with MS bracket, Suspended from ceiling/beam with suspenders du;y painted with two coates of primer and finished with enemal paint of approve colour laid through pipe or in trech after wrapping with hassem cloth after applying coaltar primer as required as per direction of Engineer-In-Charge. |
| 303 | 100MM NB |
| 304 | Providing,Fitting & Fixing of following size cast iron double flanged type dual plate Non-return valve as per IS-5312(Part-I) : 2004 with ISI mark of pressure rating PN-1.60 including fixing the same with supply of required jointing materials like flanges,robber inserten, MS Nuts & Bolts, Paint etc. and testing the joints with required water pressure etc. all complete as per specification and direction of Engineer-In-Charge. |
| 305 | Providing, Fixing,testing & Commissioning of following size manually operated hand lever type cast iron double flanged slim seal wafer type butterfly valves with EPDM iron disc as per IS-13095 having pressure rating PN-1.60 including fixing the same with supply of required jointing materials like rubber insertion, MS Nuts & Bolts, Paint etc. and testing the joints with required water pressure etc. all complete as per specification and direction of Engineer-In-Charge. |
| 306 | 100MM NB |
| 307 | Supply, Installation,Testing & Commissioning of Pressure Gauge of 0-16 KGF/Sqcm range with cutoff bronge ball valves of suitable size with all assessories and direction of Engineer-In-Charge. |
| 308 | Supply, Installation,Testing & Commissioning of Pressure Switch of with cutoff bronge ball valves with integral strainer & flare nut (Mixed Ends) of suitable size with all assessories and direction of Engineer-In-Charge. |
| 309 | Fire Extinguishers |
| 310 | Portable Fire Extinguisher System Supplying, Installation, testing & commissioning of CO2 type Fire Extinguisher 4.5KG Capacity confirming to IS- 2878 made from ISI marked seamless cylinder confirming to IS- 7285 made from ISI marked controlled valve confirming to IS- 3224 high pressure 1mtr discharge hose & iron complete with initial gas charges with carrying handle & wall mounting bracket as per direction of EIC. |
| 311 | Supply,installation,testing & commissioning of ABC type file extinguisher 6kg capacity including cost of all material & labour etc complete. |
| 312 | Illuminated Signage |
| 313 | Construction of Storage tank of 10000 Ltr( 02 no. Of 5000 Ltr/ 05 no.s of 2000 Ltrs) Above top roof slab Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysDec 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender