Housing Urban and Rular Development Government Departments Closing in 13 days TDR #58648278

Tender For Improvement Of Boulagadia-Oupada-Fatepur Road From 10/000 Km To 19/750 Km, 23/000 Km To 23/500 Km & 30/000 Km & 30/246 In The District Of Balasore Under State Plan For The Year 2025-26.

Issued by Government Departments · Baleshwar, Odisha
Tender Value
4.75 Crore
Estimated cost
Bid Submission
05 Dec 2026
13 days left
EMD
4.76 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Baleshwar → Odisha
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Improvement Of Boulagadia-Oupada-Fatepur Road From 10/000 Km To 19/750 Km, 23/000 Km To 23/500 Km & 30/000 Km & 30/246 In The District Of Balasore Under State Plan For The Year 2025-26.

BOQ

Name of Work:- Improvement of Boulagadia-Oupada-Fatepur road from 10/000 km to 19/750 km, 23/000 km to 23/500 km & 30/000 km & 30/246 in the District of Balasore under State plan for the year 2025-26.
Sl. No. Item Description
1Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness.
2Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m.
3Construction of embankment with approved materials deposited at site from roadway cutting and compacted to meet requirement of table 300-2.
4Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density.
5Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2.
6Scarifying the existing bituminous road surface to a depth of 50mm and disposal of scarified material with in all lifts and leads upto 1000 metres as per clause 501.8.3.2 MOSRT&H specification for Road& Bridge works (4th revision).
7Construction of Granular Sub-Base by providing Grading-VI material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401
8Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.
9Providing and applying Primer Coat with emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.60 kg/sqm. using mechanical means as per clause 502 of MORT&H specifications for road & bridge works (4th revision).
10Providing and applying tack coat with emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom.
11Providing 50mm compacted thick Bituminous Macadam of grading -2 using crushed stone Gr.-2 materials & 60/70 penetration grade of bitumen preparing preemixed materials with bituminous binder with hot mix plant, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per clauses 501 and 504 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, royality & other taxes of materials, cost of labour, machinery, T&P etc complete.
12Providing & laying Bituminous Concrete of grading -2 using crushed stone Gr.-2 materials & CRMB-55/VG-30 grade of bitumen preparing preemixed materials with bituminous binder with hot mix plant, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per clauses 501 and 507 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, royality & other taxes of materials, cost of labour, machinery, T&P etc complete.
13Providing 25mm compacted thick S.D.B.C. of grading -2 using crushed stone Gr.-2 materials & 60/70 penetration grade of bitumen preparing preemixed materials with bituminous binder with hot mix plant, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per clauses 501 and 508 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, royality & other taxes of materials, cost of labour, machinery, T&P etc complete.
14Providing and laying mastic asphalt concrete of 25mm thick premixed with bituminous binder, transported to site, laid over a previously prepared surface as per clause 504 of MoSRT&H Specification for Road and Bridge works (5th revision)
15Providing compacted granular materials in shoulder by using moorum having required P.I. value with sand admixture if required, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC and compacting with vibratory roller to achieve the desired density, as per approved Drawing & Technical Specifications and as per Clause - 407 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, royality & other taxes of materials, cost of labour, machinery, T&P etc complete..
16Providing dry lean cement concrete sub-base for concrete pavement using concrete mixer placing and levelling with fully mechanism method and finished as per approved Drawing & Technical Specifications in accordance with section - 601 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, royality & other taxes of materials, cost of labour, machinery, T&P etc complete.
17Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with 43 grade cement @ 400 kg per cum, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing and as per Clause 602 of MoSRT&H Specifications for Road & Bridge works (4th Revision)
18Turfing the slopes of embankment with compact turf grass as per approved Drawing & Technical Specifications and as per Clause - 307 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, royality & other taxes of materials, cost of labour, T&P etc complete.
19Road marking with Hot applied thermoplastic compound with Reflectorising Glass beads on bituminous surface by providing and laying of hot applied thermoplastic compound 2.5mm thick including Reflectorising glass beads @ 250gms per sqm area thickness of 2.5mm.is exclusive of surface applied glass beads The finished surface to be level uniform and free from streaks and holes as per IRC: 35
20Providing and fixing of road stud 100x 100 mm, die-cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling hole 30 mm upto a depth of 60 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS 873 part 4:1973.
21Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 7.
22a) 80cm x 60cm size Rectangular (Informatory)
23b) Route Marker Sign(45cm x 60cm)
24c) 90cm size Equilateral Tringle
25d) 60cm size Circular
26e) 90cm high octagon
27f) Hazard Marker(30cm x 90cm)
28g) Single Chevron(60cm x 60cm) in curves
29Reinforcement cement concrete M 15 using 10mm to 12mm size chips for Km Stone of standard design as per IRC-25-1967 fixed in position including finishing and lettering including painting
30c) 200m stone
31Providing & erecting a \\"W\\" metal beam crash barrier comprising of 3mm thick corrugated steel metal beam rail, 70cm above road/ ground level fixed ISMC series channel vertical post 150mm x 75mm x 5mm spaced 2m centre to centre, 1.8m high, 1.1m below ground / road level, all steel part & filments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixedon the vertical post with a spacer of channel section 150mm x 75mm x 5mm, 330mm long complete as per clause-811 of MoRT&H Specifications for Road & Bridge works (5th Revision).
32Providing and filling foundation trenches with sand in layers not exceeding 150mm thick including watering and compacting including all leads and lifts for finish item of work as per clause 1500 of MORT&H specification.
33P.C.C.M-15 Grade in foundation bed as levelling course using 40mm to 10mm size crushed stone aggregates mixed by concrete mixer, laying in layers and compacting by vibrator & all leads and lifts as per approved Drawing & Technical Specifications and as per Section - 1700 & 2100 of MoSRT&H Specifications for Road & Bridge works (Latest Revision).
34Re-inforced Cement Concrete M-20 mix with stone aggregate 20mm nominal size mechanicaly mixed & vibrated in foundation upto a depth of 1.5m below ground level and 1.5M above ground/bed level for finished item work as per clause No. 1000/1500/1700/2200 of MORT&H specification.
35a)Wall
36b)Bed
37c)Cover Slab
38Providing HYSD reinforcement for RCC works in substructure including bending, binding and placing in position for finished item work as per drawing and as per clauses 1000/1600 of MORT&H specification.
39Providing weep holes in brick masonary / plain or reinforced concrete abutment with 100mm dia AC pipe Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58648278
AUTHORITY Government Departments
TENDER VALUE 4.75 Crore
LAST DATE 05-12-2026
Authority
Authority Name Road And Building Department
Work Description Tender for Improvement Of Boulagadia-Oupada-Fatepur Road From 10/000 Km To 19/750 Km, 23/000 Km To 23/500 Km & 30/000 Km & 30/246 In The District Of Balasore Under State Plan For The Year 2025-26.
Basic Detail
Tender No CCEEC-21-2026-27
Bidding Type Tender
Location
City Baleshwar
State Odisha
Key Dates
Publish Date 21 Nov 2026
Submission Date 05 Dec 2026
Open Date 07 Dec 2026
Finance
Tender Value 4.75 Crore
Tender Fee 10000
EMD 4.76 Lakhs
Exemption Available
Document List
bbf9fb53-67d3-4b7d-9304-a4b23c1cb243.html
BOQ_622730.xls
Tendernotice_1.pdf
Tendernotice_2.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 21, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 05, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 13 days
Dec 07, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 15 days

Tender Documents

Download All (ZIP) ↓
html

bbf9fb53-67d3-4b7d-9304-a4b23c1cb243.html

xls

BOQ_622730.xls

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender