Housing Urban and Rular Development Government Departments Closing in 12 days TDR #58648260

Tender For Stmc Works For 01 No. Of Road For A Length Of 42.358 Km Under Bhadrak (R & B) Division, (Package-5).

Issued by Government Departments · Bhadrak, Odisha
Tender Value
3.15 Crore
Estimated cost
Bid Submission
04 Dec 2026
12 days left
EMD
3.16 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Bhadrak → Odisha
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Stmc Works For 01 No. Of Road For A Length Of 42.358 Km Under Bhadrak (R & B) Division, (Package-5).

BOQ

Name of Work:- STMC works for 01 No. of Road for a length of 42.358 km under Bhadrak (R & B) Division, (Package-5).
Sl. No. Item Description
1Restoration of rain cuts with soil, moorum, gravel or a mixture of these, clearing the loose soil, benching for 300 mm width, laying fresh material in layers not exceeding 250 mm and compacting with plate compactor or power rammers to restore the original alignment, levels and slopes as per MORT&H specification cluse no 3002 and as per direction of the Engineer-in-charge
2Removal of rank vegetation/weeds and undesirable vegetation from shoulders,embankment slopes up to ROW(bothsides) complete in all respects including breaking of clods,rough dressing and disposal of waste material and vegetation at a place outside ROW as per direction of Engineer-In-Charge and as per maintenance standards Clause no 3.1.(Frequency of cleaning will be one time in a quarter)
3Stripping excess soil from the shoulder surface to achieve the approved level and compacting with plate compactor etc complete.
4Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.
5Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of class-B Type IV retro reflective sheeting fixed cover 2 mm thick aluminium sheeting vide clause 801.3, 3mm/4mm thick aluminium composite material sheet depending on the size of the sign fixed over back support frame of min 25 x 25 x 3 mm Angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67 a)90 cm equilateral triangle
6b)90 cm circular
7c)80cmx60cm Rectangular
8d)90 cm high octagon
9Providing for scraping cleaning the road surface applying tack coat using 3 Kg of Bitumen for 10 Sqm and laying 75mm thick BUSG in two layer 37.5mm thick each layer using 0.50 Cum of 25mm to 40mm size H.G (H.B) metal and 15.00 Kg of Bitumen for 10 sqm in each layer with 0.13 Cum of 12mm size H.g (C.H) chips as key stone for 10 Sqm spreading over and laying including heating pourring and spreading over and spreading bitumen, metal and chips
10Providing, laying, spreading & compacting graded stone aggregae to Wet Mix Macadam speciication including premixing the materials with water at OMC in mechanical Mix Plant carriage by tipper and laying uniform layers with paver etc, complete.
11Providing and applying Primer coat with bitumen emulsion on prepared surface of granualr base including clearing of road surface and spraying priemr at th rate of 0.60 Kg/Sqm using mechanical means as per clause 502 of MoSRT&H Specification for Road & Bridge works (4th Revision)
12Providing and applying Tack coat with bitumen emulsion using emulsion pressure distributor at the rat oe 0.20 Kg per sqm on the prepared bituminous / granular surface cleaned with mechanical broom as epr clasue 503 of MoSRT&H Specification for Road & Bridge works (4th Revision)
13Providing and laying 20mm thick premix carpet using 0.27 Cum of 12mm size crusher stone chips and 14.60kg penetration grade of bitumen for 10 Sqm including hand pakcing to proper camebr consolidation with P.R.R etc, complete.
14Providing & laying 6mm thick precoated seal coat using 0.06 cum of 6mm size chips and down graded as per sieve analysis and 6.80 Kg of bitumen for 10 Sqm including hire and running charges of P.R.R, -Page-149
15Providing & laying dense graded Bituminus Macadam with batch type Hot Mix Plant using crushed aggregae of specified grading Premix with bituminous binder of 60/70 penetration grade of bitumen transporting Hot Mix to work site laying with a Mechanical Paver finisher to the required grade level and alignment, rolling with smooth wheel vibratoryand tondom roller to achieve the desire compaction as per clause No.504 of MORT&H specification for Road & Bridge works (4th Revision)
16Providing & laying Bituminous Concrete with 100 to 120 TPH batch type HMP producting and average out put of 75 tonne per hour using crushed aggregates of specified grading premix with penetration grade of bituminous binder of mix and filler transporting the hox mix to work site laying with a Mechanical paver finisher to the required grade level and alignment rolling with smooth wheeled vibratory and tandam roller to achieve the desired compaction as per clause No.508 of MORT&H Specification for Road & Bridge works (4th revision)
17Filling Pot-holes and Patch Repairs with Bituminous concrete, 40mm. Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 504, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2
18Earth work in excavation offoundation in hard soil with dressing and levelling the bedand etc. complete.all leads and lifts including
19Providing and filling sand in foundation watering and ramming etc. complete.
20Providing cement concrete (1:3:6) in foundation and plinth including cost, conveyance, royalties and taxes of all materials etc, complete.
21Reinforced cement concrete M-20 nominal mix in sub-structures as per drawing and Technical specifications of clause No.1500,1700 & 2100 of MORT&H specification for Roads & Bridges (4th revision)
22Reinforced cement concrete M-20 nominal mix in sub-structures as per drawing and Technical specifications of clause No.1500,1700 & 2100 of MORT&H specification for Roads & Bridges (4th revision)
23Reinforced cement concrete M-20 nominal mix in sub-structures as per drawing and Technical specifications of clause No.1500,1700 & 2100 of MORT&H specification for Roads & Bridges (4th revision)
24Steel reinforcement work using HYSD steel as per Section 1600 of MORT&H Specifications for Road & Bridge works (4th Revision)
25Providing compacted granular materials in shoulder by usuing moorum having required P.I value or sand admixture if required in sub-base including watering and rolling with P.R.R etc, complete.
26Providing and painting 2 coat enamel paint over one coat primer etc completed. including all cost of materials and labour T&P etc.complete as per direction of Engineer-in-charge. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58648260
AUTHORITY Government Departments
TENDER VALUE 3.15 Crore
LAST DATE 04-12-2026
Authority
Authority Name Road And Building Department
Work Description Tender for Stmc Works For 01 No. Of Road For A Length Of 42.358 Km Under Bhadrak (R & B) Division, (Package-5).
Basic Detail
Tender No CCEEC-20-2026-27
Bidding Type Tender
Location
City Bhadrak
State Odisha
Key Dates
Publish Date 21 Nov 2026
Submission Date 04 Dec 2026
Open Date 05 Dec 2026
Finance
Tender Value 3.15 Crore
Tender Fee 10000
EMD 3.16 Lakhs
Exemption Available
Document List
37c5a532-a998-4f76-9930-b0622f6f03d7.html
BOQ_622752.xls
Tendernotice_1.pdf
Tendernotice_2.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 21, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 04, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 12 days
Dec 05, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 13 days

Tender Documents

Download All (ZIP) ↓
html

37c5a532-a998-4f76-9930-b0622f6f03d7.html

xls

BOQ_622752.xls

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender