Rural Development Government Departments Closing in 14 days TDR #58648258

Tender For Construction Of Govt.Homoeopathic Dispansary Building At Gandabahali Under Sinapali Block In The Dist. Of Nuapada

Issued by Government Departments · Nuapada, Odisha
Tender Value
62.38 Lakhs
Estimated cost
Bid Submission
07 Dec 2026
14 days left
EMD
62381
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Nuapada → Odisha
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Construction Of Govt.Homoeopathic Dispansary Building At Gandabahali Under Sinapali Block In The Dist. Of Nuapada

BOQ

Name of Work:- Construction of Govt.Homoeopathic Dispansary Building at Gandabahali under Sinapali Block in the Dist. of Nuapada
Sl. No. Item Description
1Dismantling brick or stone masonry in lime or cement mortar under 3m.height including stacking the useful materials for reuse and removing the debris within 50m.lead
2Dismantling and removing R.C.C.columns beams, slab, staircase landing lintels including stacking the useful materials for reuse and removing the debris within 50m lead
3Excavation of foundation in laterite rock or any hard rock ( other than granite or distinguished rock ) removed by chiesselling including dressing and levelling the bed not exceeding 1.50 mtr in depth and depositing the soil within initial lift 50 mtr. as per specification and direction of the Engineering in chsarge.
4Earthwork in hard soil with initial lead and lift including rough dressing and breaking clods upto 5cm to 7cm size and laying in layers each layer not exceeding 0.3m in depth etc. complete.
5Supplying filling in foundation and plinth with sand including watering ramming, cost, conveyance, royalties and all taxes of materials and cost of labour with T&P required for the work etc. complete (measurement will be taken on finished section only etc.complete as directed by the Engineer-in-charge.GHD
6Boundry Wall
7Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement as per MORD technical Specification Clause 301 and direction of the Engineer in Charge (excluding cost of excavation and transportation to site).
8Cement concrete (1:3:6 ) in foundation and plinth below the base course of terrazzo flooring using 4cm (1 1/2\\") size black hard hand broken granite stone metals of approved quality from approved quarry including lowering laying concrete watering and curing etc. complete to required levels laid in layers not exceeding 0'-6\\" thick inlcuding cost, conveyance, royalties and all taxes of all materials and cost of all labour with T & P required for the work complete. GHD
9Boundry Wall
10Brick masonary in cement mortar (1:6) using K.B.Bricks / Cement flyash of size 10\\" x 5\\" x 3\\" having crushing strength not lessthan 75 Kg/Cm2 after immersing the bricks for six hours in water before use in Foundation and plinth in all florrs with all necessary projection, cutting mlulding, corbelling, champering, watering and curing including cost conveyance, royalties and taxes of all materials and labour T&P required for the work etc.complete as per the direction of Engineer in Charge. GHD
11Boundry Wall
12R.C.C.work of M-25 having a minimum comprresive strength (in work test) 250 kg/Cm2 in 15 cm cubes at 28 days after mixing and test conducted in accordance with IS 456 and IS 516 using 12mm size black hard crusher broken granite chips including hoisting,lowering laying and compacting concrete by using vibrator with watering and curing for 28 days centering and shuttering and finishing the exposed surface smooth providing grooves or beds whereever necessay including cost conveyance,royalties and all taxes of all materials and cost of all labour with T&P required for the work etc.complete in all respect but excluding cost of M.S.Rods or Tor Steel and binding wires and labour charge for bending binding and tying the grills etc.complete in all respect as per direction of Engineer-in-charge.Column Base and Footing GHD
13Boundry Wall
14Plinth Bend/Grade Beam GHD
15Boundry Wall
16Bed Block Gound Floor
17First Floor
18Lintel Band Ground Floor
19First Floor
20Second Floor
21Column in Super structure Ground Floor
22First Floor
23Second Floor
24Boundry Wall
25Wall Beam & T-Beams (Ground Floor)
26First Floor
27Second Floor
28Stair Case Ground Floor
29First Floor
30Chajja & Fin Ground Floor
31First Floor
32Second Floor
33Shelves Ground Floor
34First Floor
35Roof Slab Ground Floor
36First Floor
37Second Floor
38Providing HYSD bar reinforcement for R.C.C. work including Straightening, cutting, bending, binding, welding, tying the grills, laying and placing in proper position as per approved design and drawing including cost, conveyance of 18 to 20 gauge binding wire cost and conveyance of HYSD bars complete in all respect as per specification for road & Bridge and direction of Eng - in Charge. Ground Floor
39First Floor
40Second Floor
41Boundry Wall
42Brick masonary in cement mortar (1:6) using /Cement flyash Bricks of size 10\\" x 5\\" x 3\\" having crushing strength not lessthan 75 Kg/Cm2 after immersing the bricks for six hours in water before use in superstructure in all florrs with all necessary projection, cutting mlulding, corbelling, champering, watering and curing including cost conveyance, royalties and taxes of all materials and labour T&P required for the work etc.complete as per the direction of Engineer in Charge. Ground Floor
43First Floor
44Second Floor
45Boundry Wall
4612mm(1/2\\") thick cement plaster (1:6) in finished smooth to outside smooth surface of brick walls afrer racking out joints including watering and curing etc.complete with cost,conveyance royalties,all taxes and cost of all materials and cost of all labour with T&P requred for the work complete. as per the direction of Engineer in Charge. Ground Floor
47First Floor
48Second Floor
49Boundry Wall
5016mm(5/8\\") thick cement plaster (1:6)in finished smooth to inside smooth surface of brick walls afrer racking out joints including watering and curing etc.complete with cost,conveyance royalties,all taxes and cost of all materials and cost of all labour with T&P requred for the work complete. as per the direction of Engineer in Charge. Ground Floor
51First Floor
52Second Floor
53Boundry Wall
5420mm thick cement plaster (1:6)in surface of brick walls afrer racking out joints including watering and curing etc.complete with cost,conveyance royalties,all taxes and cost of all materials and cost of all labour with T&P requred for the work in Foundation and plinth etc complete. as per the direction of Engineer in Charge. Boundry Wall
55Ground Floor
56Supplying fitting and fixing of UPVC door of approved make with 6 mm thick glass of approved qualiy complete with frame shutters and all fitting and fixtures.Rate as per lt No 16100 dt-08.05.18 of EIC Civil Nirman Soudha. First Floor
57Supplying fitting and fixing of Two track UPVC sliding window of approved make with 6 mm thick glass of approved qualiy complete with frame shutters and all fitting and fixtures.Rate as per lt No 16100 dt-08.05.18 of EIC Civil Nirman Soudha. Ground Floor
58First Floor
59Second Floor
60Supplying,fitting and fixing of M.S. doors, windows and iron grill gate made out of (45x45x60)mm size angular frame with square bar M.S. flat for grills of approved design icluding all cost conveyance taxes etc. complete. ( Prevaling lowest local market rate and excluding labour for fixing ) Ground Floor
61First Floor
62Second Floor
63Boundry Wall
64Fixing vetrified tiles in floors,treads and landings on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile. Ground Floor
65First Floor
66Fixing Vetrified tiles in dados,skirting and in rises of steps on 12mm thick bed of cement plaster (1:3) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile. Ground Floor
67First Floor
68Supplying, fitting afixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost conveyance, taxes of all materials labour, T&P etc. required for the complete in all respect.Ground Floor
69First Floor
70Finishing two coat wall surface with acrylic wall putty finished smooth to exposed new plastered surface including cost of all materials etc.complete.Ground Floor
71First Floor
72Second Floor
73Finishing wall surface with two coats of approved quality of weather seal coat of approved shade over a coat of primer including cost of all materials etc.complete.Ground Floor
74First Floor
75Second Floor
76Boundry Wall
77Providing and Applying two coat of Plastic emulsion paint of approved shade including cost of Plastic emulsion paint including all etc complete.Ground Floor
78First Floor
79Painting two coats with approved paint over a coat of primer Including cost of all materials etc. complete.Ground Floor
80First Floor
81Second Floor
82Cement Concrete (1:2:4) with 12mm size hard granite chips including hoisting and laying etc.complete.Ground Floor
83Earthwork in hard soil with initial lead and lift including rough dressing and breaking clods upto 5cm to 7cm size and laying in layers each layer not exceeding 0.3m in depth etc. complete. ( By Mechanical means )Land Development
84Labour for fixing GCI sheets in roof including fixing of ridges and wind ties etc. complete but excluding cost of fittingCycle Stand
85Providing and laying 80mm thick factory made cement concrete vibratory compaction and approved size and design/shape laid in bed of coarse sand filling the joints with coarse sand etc all complete as per direction of the Engineer-in-Charge.Cycle Stand
86Fitting and Fixing Glass Louvers in position in wooden,stell,Window frames inclding cutting grooves etc complete
87PH WORKSupplying all materials,labour,T&P and fitting & fixing of 4.0 kgf/cm2 U-PVC soil waste ventilating pipes and fitting of the following O.D conforming to ISI No.13592/1992 to walls with nails bobbins and wooden plugs or earth work in excavation in all kinds of soil for laying in trenche including jointing with supply of approved rubber lubricant by non-heat application method/as per manufactures specification including tasting and refilling and trenches as per direction of E.I.C.(a)110mm dia.U-PVC SWR pipes
88(b)110mm dia.U-PVC P-trap
89(d)110mm dia.U-PVC SWR Double junction door
90(e)110mm dia.U-PVC SWR door bend
91(f)110mm dia.U-PVC SWR Offset
92(g)110mm dia.U-PVC SWR plain bend
93(i)110mm dia.U-PVC SWR vent cowl
94(j)125mm dia CP greatings
95(k)75mm dia.U-PVC SWR pipes
96(l)75mm dia.PVC SWR plain bend
97(m)75mm dia.PVC SWR door bend
98Supplying all materials,labour,T&P cutting holes through brick/stone masonry works including making good the damages in cm(1:4)for taking HCI/PVC pipe & fitting etc. all complete as per PH specification and direction of E.I.C.(a)250mm thick wall
99(b)Roof cutting
100Supplying all materials,labour,T&P and fixing wash down water closet(E.W.C)with integral S or P trap to the floor with wooden plug and CP screw including jointing the trap with soil waste pipe in cm(1:1)etc all complete as per specification and direction of the E.I.C.(a)EWC with P & S trap plain (Nycer/Cera/Hindware/Parryware)
101Supplying all materials,labour,T&P and fixing of plastic seat cover for EWC with chromium plated brass hinges and rubber buffer etc all complete as per specification and direction of the E.I.C.
102Supplying all materials,labour,T&P and fixing wash basin with hole for pillar taps with cast iron or M.S. brackets painted white including cutting holes in walls and good the damages etc. all complete as per specification and direction E.I.C.(a)550mmx400mm size WHB(Neycer/Parrywear/Cerra/Hindware)
103supplying all labour,T&P materials & fixing wash Kitcken Sink with CI/MS Brackets painted white including holes in walls and making good the damages etc. all complete as per PH specification and direction of E.I.C(a)600mmx450mmx200mm Steel sink with 40mm dia c.p. west,west pipe and brackets..
104Supplying all materials,labour,T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specifications and direction of E.I.C.Soap holder
105Supplying all materials,labour,T&P and fixing mirror of superior glass mounted on 6mm thick A.C.sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the E.I.C. (a)600mmx450mm Mirror
106Supplying all materials,labour T&P and fixing standard size glass shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per PH specification and direction of E.I.C.a)(125x600)mm size glass-shelf
107Supplying all materials,labour,T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of E.I.C.(a)CP towel rail
108(a)CP Towel Ring
109Supplying all materials,labour T&P and fitting and fixing 10 Ltrs capacity PVC LL flushing cistern with a pair of CI/MS brackets complete with fittings such as syphonic arrangement,15mm nominal size brass/PVC ball valve with polythene float,CP/Brass handle,unions and couplings for connection with inlet,outlet,over flow pipes,32mm dia PVC flushbend,15mm dia PVC connection pipes including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main with etc all complete as per specification and direction of the E.I.C.(a)10 lit PVC L/L Cistern(Parry ware)
110Providing fitting fixing Al door with anodized Al door section of 9202 as vertical member, 9201 as top, 9200 as bottom and middle member with frame section as 9221 with tapered clip no 4660 and frame to be completed by means of jointing angle no 1855 including cost of labour T&P hire charges of drilling machine labour charges etc complete with cost of laminated board. and as per direction of the Engineer in charge.
111Supplying all materials,labour,T&P and fixing porcelain glazed tiles in floors, on 25mm thick bed of cm(1:1) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. all complete as per specification and direction of the E.I.C.
112Supplying all materials,labour,T&P and fixing porcelain glazed tiles in dados/skirtings on 12mm thick CP(1:3)joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing etc. all complete as per direction of the E.I.C.
113Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the E.I.C.Initial lift up to 1.50m
114From 1.5m to 3.00m depth
115Supplying all materials labour T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to work sitepayment of royalty taxes etc all complete as per direction of E.I.C.
116Supplying all materials,labour,T&P and providing cc(1:3:6) with 4cm size hard granite metal including watering,curing,conveyance of all materials to worksite,payment of royalty,taxes etc all complete as per specification and direction of the E.I.C
117Supplying all materials,labour,T&P and providing cc(1:1.5:3)with 12mm size HG chips including watering,curing and conveyance of all materials to work site,payment of royalty,taxes etc all complete as per P.H specification and direction of the E.I.C.
118Supplying all materials labour T&P and providing brickwork with KB bricks having crushing strength not less than 75kg/cm2 with dimensional tolerance +/-8% including watering,curing conveyance all materials to worksite payment of royality taxes etc. all complete as per specification direction of E.I.C. KB Brickwork in cm(1:4) F&P
119Supplying all materials,labour,T&P and providing cement plaster on brick/stone work including watering, curring and conveyance of all materials to work site,payment of royalty,taxes etc all complete as per P.H specification and direction of the E.I.C.12mm thick CP in cm(1:3)
120Supplying all materials labour T&P and providing cement punning for skirting including watering,curing, conveyance of all materials to worksite,payment of royality,taxes etc. all complete as per specification and direction of E.I.C.
121Supplying all materials labour T&P and providing rigid and smooth centering & shuttering for RCC works including falsework and dismantling them after casting including conveyance of all materials to worksite, payment of royality,taxes etc. all complete as per specification and direction of E.I.C.
122Supplying all materials labour T&P and providing MS reinforcement for RCC works including cutting, bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge,conveyance of all materials to worksite,payment of royality,taxes etc. all complete as per specification and direction of E.I.C.
123Supplying all materials labour T&P and providing RCC(1:1.5:3)using 12mm hg chips for RCC works including hoisting,laying,watering,curing,conveyance of all materials to work site,payment of royality, taxes etc. all complete as per specification and direction of E.I.C.
124Supplying all materials,labour,T&P and providing 110mm dia PVC Tee inside the septic tank including cutting holes and duly embeded in cc(1:1.5:3)using 12mm size HG chips fitted and fixed in position and mending good the damages etc all complete as per P.H specification and direction of the E.I.C.
125Supplying all materials labour T&P and Providing cement flush pointing(1:3) to brick masonary including watering,curing,conveyance of all materials to work site etc. all complete as per specification and direction of E.I.C.
126Supplying all materials,labour,T&P and filling Foundation and Plinth with excavated earth including watering, ramming etc all complete as per direction of the E.I.C.
127Supplying all materials,labour,T&P and constructing inspection chamber of the following sizes with cc(1:3:6)using 40mm size hg metal on bed,1st class KB Brickwork in cm(1:6)moulding and shaping the channel inside and benching with cc(1:1.5:3)using 12mm size hg chips,12mm thick CP(1:3)with punning to inside,cement flushpointing(1:3)to outside,RCC cover slab in cc(1:1.5:3)using 12mm size h.g. chips with RCC man hole cover,e.w. in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,conveyance of all materials to site,payment of royality,taxes etc. all complete as per approved specification and direction of E.I.C.(a)Inside size500mm x500mm x 460mm
128Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C. precast cover slab in c.c(1:1.5:3) using 12mm size h.g. chips, foundation concrete (1:3:6) using 40mm size thick h.g.metal on bed and arround trap, K.B. brick in c.m.(1:6) in foundation and plinth and inside 12mm thick c.p. (1:3) finished with a floating coat of neat cement including fixing 100mm size H.C.I. gully trap and grating etc. all complete as per approved drawing specification and direction of EIC. Inside size ( 250 x 250 )mm
129Supplying all materials, labour, T&P and laying in trenches PVC SWR soil waste ventilating pipes for sewer line of following dia in trenches (to slope or level)and jointing with supply of approved solvent cement by non-heat application method C.C (1:3:6) using 40mm size hard granite metal on bed of the trenches and all round concrete encashing with C:C (1:4:8) using 40 mm size H.G. metal, earthwork in excavation in trenches in all kinds of soil, refilling the same in a layer of 0.30mtr with watering, ramming and removing of surplus earth, testing the S.W. pipeline etc. all complete as per approved drawing, specification and direction of the E.I.C(a)110mm dia PVC pipe Line Haunch top .
130Supplying all materials,labour,T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class KB brick work in cm(1:6)for the remaining height at top,12mm thick CP(1:4)inside and outside over masonry brick work gravel packing in the rear of well steining,RCC cover slab in cc(1:1.5:3)using 12mm HG chips,fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works,watering,curing,conveyance of all materials to work site,payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C.(a)Soak way Pit 1.00m dia x 2.00m Deep
131Supplying all materials, labour, T&P and construction of masonry staging with providing 1st class K.B. Brick work in C.M.(1:6) of 0.46mtr height in staging, 12 mm cement plaster in C.M (1:6), R.C.C. Beam of 0.25mx0.30mx2.60m in C.C (1:1.5:3) using 12mm size H.G.Chips including centering, shuttering, bending and binding of rod etc watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.(a)1000 lits capacity on the roof of 1st floor
132Supplying all material,labour,T&P and Fitting and Fixing of Rotational moulded polythene cylindrical vertical water storage tank conforming to IS:15701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jamnuts,including hoisting upto a height of 5mtr above GL & placing the tank in required position including conveyance of all materials to worksite,payment of royalty,taxes etc all complete as per PH specification and direction of the E.I.C.(a)1000 lits capacity on the roof of 1st floor
133Supplying all materials,labour,T&P and providing&fixing to wall or ceiling and floor pvc pipes confirming to ASTM-D-1785/89(sch-80)and pipe fittings of the nominal bore with clamps including making good the wall,ceiling and floor all complete as per specification and direction of E.I.C.(a)25mm Outer dia C-PVC Pipe(Internal)
134(b)25mm dia U-PVC Pipe(External)
135Supplying all materials,labour,T&P and cutting holes for taking G.I/PVC pipes and making good the damages as per the direction of E.I.C.a)In Ground Floor
136Supplying all materials,labour,T&P and cutting holes in RCC,floors,roof,etc.upto 19cm thick for passing GI/PVC pipes and fitting etc. and repairing the holes after insertion of pipes etc. with cc(1:2:4)including finishing complete so as to make it leak proof as per direction of E.I.C.(a)In Ground Floor
137Supplying all materials,labour,T&P and cutting grooves in pucca floor and walls for taking G.I/PVC pipes and making good the damages as per the direction of E.I.C.a)In Ground Floor
138Supplying all materials,labour,T&P and fixing brass/CP fittings of thefollowing nominal bore with supply of all jointing materials complete as per specification and direction of E.I.C.(Jaguar/hindware/parrywareequivalent )(b)15mm dia CP(LB) Bib cock ( Out Side 1 Num)
139(c)15mm dia CP Two way Bib cock
140(d)15mm dia CP bib cock with Elbow action(Plaza/ Amber)
141(e)15mm dia CP Angle stop cock
142(e)15mm dia CP Pillar stop cock
143(h)15mm dia Health Faucet & 1.0m long Flexible pipe
144(i)25mm dia PVC F.W.V.
145(j)15mm dia CP Flange
1461.00HP Single Phase Submersible Pump SetSupplying all materials,labour,T&P and fitting and fixing of ISI mark 1.0HP single phase vertical water cool submersible pump set with discharge 1800/2200Lit/Hour & a head-55/70mtr.of reputed make(CRI/ KSB/Texmoor Equivelent) Including cost conveyance and taxes etc. all completes as per P.H. Specification and direction of E.I.C.
147Supplying all materials,labour,T&P and fitting&fixing of 1.0HP single phase vertical submersible pump set with commissioning and testing etc. all completes as per P.H. Specification and direction of E.I.C.
148Supplying all materials,labour,T&P and fitting & fixing of ISI mark DOL starter of reputed make like BCH or equivalent for 1.0HP single phase vertical submersible pump set including all cost conveyance & taxes etc. all completes as per P.H. Specification and direction of E.I.C.
149Supplying all materials,labour,T&P and fitting & fixing of (2.5mm)2 3core copper flat suitable cable having ISI mark of reputed company like BCH/Finolex or equivalent & connecting the pump starter including cost conveyance & taxes etc. all completes as per P.H. Specification and direction of E.I.C.
150Supplying fitting and fixing of plastic rope MS well cover,MS clamp,stainless steel short piece,bend & socket including all cost,taxes etc all complete as perdirection of the E.I.C.
151Supplying fitting and fixing of HDPE Pipes & pipe fittings with making connection to pump set including all cost conveyance and taxes etc all complete as per direction of the E.I.C.
152Earthwork in all kinds of soil in excavation of foundation trenches within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth etc all complete as per direction of the E.I.C.
153Supplying all materials, labour ,T&P and laying in trenches HDPE of the following nominal bore and pipe fittings including testing etc all complete as per direction of the E.I.C.
154150mmx125mm Size Bore Well Through DTH Method:-Labour for drilling a perfectly vertical bore hole of specified dia for a specifieddepth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rigs or combination drilling rigs (650 cfm/200 psi) as required to suit the site condition as per the direction of Engineer-in-Charge including use of own rigs with its accessories, tools and plant and consumables etc for lowering of 150 mm dia PVC/GI pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and houlder formation(GI/PVC casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of the tube well). Withdrawing after completion of the tube well(a)Drilling of 150mm. dia. Bore-0.00mtr to 30.00mtr
155(b)Drilling 125mm dia. Bore-30.00mtr to 60.00mtr And Above
156Lowering the following size G.I/ PVC pipes with or without slotted pipes as per the necessity from ground level and fitted and fixed up in perfectly vertical position, including cutting and threading pipe and slotted pipe and supplying and fixing all jointing materials, tools and plant etc. complete and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above.(a)Lowring of 125mm dia pipes-0.00mtr to 29.40mtr
157(b)Cost of 125mm dia PVC casing pipes-0.00m to 30.00m
158Cleaning and developing the tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per the direction of Engineer-in-Charge.
159Supplying all materials and labour, tools and plant and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5 mtrs below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied by the Department)
160Supplying all materials , labour , T&P and providing , fitting and fixing of I. M. - II hand pump complete with accessories and along with 8nos of riser pipes of 32mm dia nominal bore hot dip galvanised screwed and socked, fitted with socked made of seamless or machine from solid bar socked fitted at one end and thread protector at the other end with 8nos of 12mm dia connecting rod made of bright bar electrogalvanised fitted with coupler and fitted with stand assembly suitable for use in bore well etc all complete as per direction of EIC.
161Supplying all materials, labour, T&P and construction of circular Tube well platform(1.80m dia) with c.c. (1:3:6) using 40mm size h.g. metal on bed and providing c.c. (1:2:4) using 12mm size around the casing pipe with circular parapet of platform with foot rest with earth work excavation in all kinds of soil as per UNICEF drawing and design etc all complete as per specification and direction of EIC.
162Supplying all materials, labour, T&P and construction of drain as per UNICEF etc all complete as per specification and direction of EIC.
163EI WORKSRecessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels /HPL/ V Guard ) -do- Group A
164-do- Group B
165-do- Group C
166Recessed wiring to Fan Point indo- Group B
167Recessed wiring to Call Bell Point in -do- Group C
168Recessed wiring to Exhaust Fan Point in -do- Group B
169S/F of Angle holder replacing Ceilling Rose
170S/F of 5A. Modular Switch & 5A. Modular Socket outlet of ISI marked on existing board
171S/F of extension board of 6 modular Metal box with modular base & cover in recess including providing and fixing of 2 nos of 3pin 5/6amp modular socket out let & 2 nos of 5/6 amp piano type modular switch, connection, painting etc as required.
172S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 6 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required
173S/F of Power point with 4 modular & 2 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type Modular switch & Socket & Mini DP MCB, connection, painting etc as required for AC
174S/F of 1 no of 5 pin 15/16 amp. Socket , 1 no of switch & 1 no of 15/16A top with modular mini MCB, in 6 modular box with cover with connection, painting etc as required for Inverter connection
175S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required. 2 Modular box with base & cover
1764 Modular box with base & cover
17712 Modular box with base & cover
178Wiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire - Finolex/L&T/Anchor/Havels/V-guard) 2x1.5+1x1.5 (1.8.1)
1792x2.5+1x1.5 (1.8.2)
1802x4+1x1.5 (1.8.3)
1812x6+1x2.5 (1.8.4)
182Inverter wiring (1x1.5smm) Copper wire (1.19.1)
183S/F of 'B/C/D' series SP MCB of 5 - 32A amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP) (2.6.1)
184S/F of 'B/C/D' series DP MCB of 5 - 32A amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads in the 2 Way double door MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required (2.6.2a)+(2.3.1b)
185Supply, Installation testing & commissioning of Main Switches (IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/HPL/Anchor/L&T /Havels/C&S/R. K.) S/F of MCB 12 way Single door (1.3.3)
186Supply, Installation testing & commissioning of Main Switches (IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/HPL/Anchor/L&T /Havels/C&S/R. K.) S/F of 63A ICDP main switch with MS box of 250mmx300mmx60mm deep ( (2.15A)+(1.24.16 )
187S/F of 63A. DP MCB Changeover on 2way single door DB
188Earthing with G.I. Earth pipe 3 mtr Long 40mm dia ISI marked including accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal & salt as required (3.2)
189Supply & laying 6 SWG G.I. wire in recess for loop earthing as required (3.17)
190Supply, Installation, Testing & Commissioning of exhaust fan upto 300 mm sweep in the exising opening, including making the hole to suit the size of the above fan making good the damaged complete, connection, etc as required. (1.43)
191S/F of Call bell/Buzzer(Ding dong type) ISI marked suitable for DC/AC single phase 230 volts complete as required. (1.30)
192S/F of computer board consisting of 3 nos of 5amp modular plug and modular switch & 1 no of Mini MCB complete with wiring on 12 modular M.S. box with modular cover.
193S/F of 18-25Watt L.E.D Tube light fitting with all accessories and connections (Make:HPL-Neptune Havells-Elite LED Pride Plus/PAC/Crompton-RetroPLL
194Supply of 1200mm A.C. Ceiling fan with all accessories and connections with out fan regulator (Make:Usha-Striker Millenium/Crompton-Jura /Anchor-XL/Havels-Velocity/Spark/Orient-Summer pride )
195S/F step type fan regulator
196S/F of 15mm dia down rod with all accessories (1.35+1.40)
197Supply & fixing of superior type C.I bulk head fitting with 9W Led Bulb for general domestic use ISI marked square / oval type with premetallic glass cover provided with galvanized steel wire guard including necessary connections. ( M-5 )
198Supply & Fixing of 60 Watt single L.E.D street light fitting with LED & Electrinic driver including all accessories and connections (Make:Crompton/Phillips/HPL/Polycab/Havells)
199S/F of fan hook 'S' type made of 16 mm MS rod for fixing in the Existing RCC Roof.
200S/F of 6 sqmm twin core unbonded aluminium service connection wire with no.10 G.I. Guard wire to support the aluminium wire
201S/F of 12w Watt LED Bulb
202S/F of 900VA/12V Invertor machine with Trolly(Make- Microtek(Super power new 1100)/V-Guard(SMART 1100)/Luminous(ZELIO SMART 1100) and 180Ah tall tubular BatteryMake-Luminous and 16A Delux plug Top with Luminous single Trolley for Invertor Battery,
203Area lightingsSupply & Installation of 30 W AIO Solar street lights having 75 Wp or more highly efficient Monocrystalline PV module & 12.8 V 30 Ah or more ) Lithium Ferrophosphate (LiFePo4) Battery (BIS approved) which shall beinside the extruded aluminium luminaire housing (Theft retardant type), MPPT charge controller having > 92% efficiency & PIR Sensor. The initial lumen output of AIO street light shall be 4800 lumen or more in CCT 6000K (+/-500K) (Lumen efficacy of 160 lm/w ) as per LM 79 report ofNABL lab . The LED chip will be of OSRAM/NISCHIA/CREE/SEOUL Semiconductor only and should be with lenses for effective lighting distribution. The complete system & BMS should be designed to provide 2 days (24 Hrs) back up in dimming mode by activating PIR sensor and battery should be kept inside the luminaire and Mono Crystalline Panel (Made in India ) to be mounted on the top of the luminaire housing. The luminaire must be having IP 66 protection for critical component like (LED compartment, Driver compartment & Battery) . The AIO street light is having IK 08 .The luminaire should have the provision the tiltable/ adjustable mounting bracket to mount it on the top of the pole directly. Warranty on the AIO street lights must be 5 years . The following test reports/certifications must be submitted for the technical acceptance of the products .1. LM 79 REPORT NABL lab ) , 2. IK 08 (Report of NABL lab ), 3. IP 66 Report of NABL lab (Make-Panasonic Havels/Crompton/Philips/Wipro)
204Supply & Installation of 6 mtr long hot dip galvanized Octagonal pole having base dia of 155 mm and top dia of 70 mm and plate thick ness of 4 mm or more complete with base plate 250x250x16mm and 4 nos. Jtype En 8 grade foundation bolts M24X750mm to withstand 180 KM / HR wind speed considering the weight & dimension of One no. Solar lights fixed on the top of the bracket . The Pole must be suiable to withstand 180 KM/Hr wind speed by considering the weight and wind expose area of one no Semi Integrated Solar lights at a height of 6 mtr above ground .Both the Octagonal Pole and EN8 grade fdn bolts must be manufactuered by Octagonal pole manufacturing company. Brackets & EN8 fdn bolts manufactured in third party Supplier/manufacturer shall not be acceptable. Make : - Utkarsh/RR Ispat/Vakrangee) Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58648258
AUTHORITY Government Departments
TENDER VALUE 62.38 Lakhs
LAST DATE 07-12-2026
Authority
Authority Name Rural Works Department
Work Description Tender for Construction Of Govt.Homoeopathic Dispansary Building At Gandabahali Under Sinapali Block In The Dist. Of Nuapada
Basic Detail
Tender No RWKHR-08/2026-27
Bidding Type Tender
Location
City Nuapada
State Odisha
Key Dates
Publish Date 21 Nov 2026
Submission Date 07 Dec 2026
Open Date 08 Dec 2026
Finance
Tender Value 62.38 Lakhs
Tender Fee 10000
EMD 62381
Exemption Available
Document List
1eff667f-051c-4a4b-b1d1-97a49fa29076.html
BOQ_622813.xls
Tendernotice_1.pdf
Tendernotice_2.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 21, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 07, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 14 days
Dec 08, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 15 days

Tender Documents

Download All (ZIP) ↓
html

1eff667f-051c-4a4b-b1d1-97a49fa29076.html

xls

BOQ_622813.xls

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender