Educational and Research Institute Boards / Undertakings / PSU Closing in 20 days TDR #58647637

Tender For Electrical Works For Engine Installation In The New Laboratory Space At Ched

Issued by Boards / Undertakings / PSU · Kozhikode, Kerala
Tender Value
2.55 Lakhs
Estimated cost
Bid Submission
11 Dec 2026
20 days left
EMD
5100
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Kozhikode → Kerala
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Electrical Works For Engine Installation In The New Laboratory Space At Ched

BOQ

Name of Work:- Engg/EMU/EMU JE 3/Engg/EMU/JEIII/0040/ CHED ENGINE LAB
Sl. No. Item Description
1Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required.
2Group C
3Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required.
4Group A
5Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
620 mm
725 mm
8Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required.
91 or 2 Module (75mmX75mm)
10Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
113 pin 5/6 A socket outlet
12Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.
133 x 2.5 sq. mm
143 x 1.5 sq. mm
153 x 4 sq. mm
16Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
174 X 10 sq. mm + 2 X 6 sq. mm earth wire
18Supply and fixing of 18/20 watt 4 feet T8 LED tube with efficacy 100lm/W. (T8 LED-Crompton LGT8-20-865-2 or compatible)
19Supply and fixing of box type tube fittings (Batten ), complete with side holders etc, as required.(Batten- Crompton ECO DIJB12LT8-20 1XT8 or compatible)
20Supply and fixing of 450 mm sweep wall mount fan with Aluminium blades, 1350RPM, minimum 100 CCM air delivery Wall mount Fan with necessory arrangement (Crompton Sstorm2 Wall mount or equivalent )
21Supplying and fixing of heavy duty 450mm sweep exhaust fan speed>1400rpm including connection cutting the wall , fixing on metal frame etc. as required in site condition. Make:crompton/almonard or Equivalent
22Supplying and fixing Four way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
23Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
24Triple pole and neutral
25Double pole
26Triple pole
27Single pole
28Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
298 way , Double door
30Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
31Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 Meter long etc. (but without charcoal/ coke and salt) as required.
32Supply and fixing 25 mm X 3 mm Copper strip on surface or in recess for connections etc. as required.
33Supplying and filling Earthing compound in the earth pit, not including excavation, but including mixing with excavated earth and water. Complying with IEC 62561-7:2018.(Excel earthing compund or its equivalent)
34Supply of 4C X 25 Sq.mm PVC/ XLPE Aluminium Armoured Cable, 650/1100V. Grade confirming to IS:7098 (Pt-1)1988
35Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required.
36Upto 35 sq. mm
37Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.
38Upto 35 sq. mm (clamped with 1mm thick saddle)
39Supply and laying one number of the 8 SWG good quality bare copper wire along the cable with connections etc. as required.
40Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
414 X 25 sq. mm (28mm)
42Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)
438 way (4 + 24), Double door
44Supplying and fixing 40 A to 63 A rating, 415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of four poles in the existing MCB DB complete with connections, testing and commissioning etc. as required..
45Supplying and fixing 40-63A , Triple pole, 430 V, C curve Miniature circuit breaker (MCB) in the existing MCB DB complete with connections, testing and commissioning etc. as required.
46Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
47Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
48Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
49Electrical Schematic drawing in Autocad and pdf format along with physical copy of the same for Electrical inspectorate approval (along with seal,signature and license details of A class contractor), ensuring that all compliance requirements and procedures are properly followed etc as required. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58647637
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE 2.55 Lakhs
LAST DATE 11-12-2026
Authority
Authority Name National Institute Of Technology
Work Description Tender For Electrical Works For Engine Installation In The New Laboratory Space At Ched
Basic Detail
Tender No Engg/EMU/JEIII/0040/ CHED ENGINE LAB
Bidding Type Tender
Location
City Kozhikode
State Kerala
Key Dates
Publish Date 20 Nov 2026
Submission Date 11 Dec 2026
Open Date 14 Dec 2026
Finance
Tender Value 2.55 Lakhs
Tender Fee Ref. Documents
EMD 5100
Exemption Available
Document List
BOQ_982796.xls
d25a023c-f9f3-4bc2-a97e-43dba6e695f9.html
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 20, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 11, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 20 days
Dec 14, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 23 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_982796.xls

html

d25a023c-f9f3-4bc2-a97e-43dba6e695f9.html

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender