Agriculture Government Departments Closing in 10 days TDR #58647539

Tender For Repairing And Painting Of Godown No 3 (Farm Machinery Bank) In Samiti Campus Bhira, Lakhimpur

Issued by Government Departments · Kheri, Uttar Pradesh
Tender Value
10.92 Lakhs
Estimated cost
Bid Submission
01 Dec 2026
10 days left
EMD
1.01 Lakhs
Bank guarantee accepted
Document Fee
1430
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Kheri → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Repairing And Painting Of Godown No 3 (Farm Machinery Bank) In Samiti Campus Bhira, Lakhimpur

BOQ

Name of Work:- Repairing and Painting of Godown No 3 (Farm Machinery bank) in Samiti Campus Bhira, Lakhimpur
Sl. No. Item Description
1Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :
2Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.
3Asbestos cement sheet
4Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
5Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in-charge.
6Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x55 mm) with EPDM seal, complete upto any pitch in horizontal / vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required
7Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in: Cement mortar 1:6 (1 cement : 6 coarse sand) Ground Floor
8R.C.C. work in beam, suspended floor, roofs having slope up to 15* landing, balconies, shelves, chhajja, lintel, bands,plain window sills, staircase and spiral stair cases above plinth level up to 5th floor level excluding cost of centering & shuttering, finishing and reinforcement with 1:1.5:3 ground floor
9P/F TMT Bar -Fe 500 in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. Ground Floor
1012mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm in girth and finished even and smooth. 1 cement : 6 Course sand Ground Floor
11Providing and laying Cement Conc. with 4 Cm gauge Stone ballast Coarse sand of 2.20 FM and cement in proportion of (1:5:10) in foundation and under floors including supply of all material etc all Complete .
1262 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.
13Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement (40 mm thick floor).
14Providing and fixing 1 mm thick M.S.sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces (a) Single leaf
15Providing and fixing on wall face unplasticised - PVC moulded fittings /accessories for unplasticised Rigid PVC rain water pipes conformingto IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion
16Centering and shuttering including strutting, propping etc. and removal of form forLintels, beams, plinth beams, girders, bressumers and cantilevers, slab Beam / Lintel
17Providing and Laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) After surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) Laying second layer of fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) Third layer of 1.5 mm thickness consisting of slurry of cement @1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) Fourth and final layer of brick tiling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured.
18Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS: 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
19Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS: 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
2013.88 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth I/C necessary repaire to scraches etc comp. PWD 708
21Finishing Wall with premium acryllic smooth exterior paint with Silicone additives of require shade 13.112.1 Old work ( two or more coat applied 1.43tr/10 sqm) Overexisting cement paint surface.
22DSR-Item-13.471- Finishing wall with acryllic smooth exterior paint of required shade. new work (Two or more coat applied @1.43 ltr/10sqm) over i/c priming coat of exterior priming applied @ 2.20 kg / 10sqm.
2313.108 Distempering with ist quality acrylic distemper( ready made ) having VOC content less than 50 grams per ltr. Of approved manufacturer of and required shade and colour complete as per manufacturer\\"s spacification 13.108.1 one or more coat on old work.
24Distempering with oil bound washeble distemper of approved brand and manufacturer to given and even shade distemper on 13.41.1 new work ( two ar more coats) over and i/c water thinnable priming coat with cement primer .
25DSR-Item-13.61- Painting with synthetic enamel paint of approved brand and manufacture of required colourto give an even shade : Two or more coats.
26Electrification Work
27Plumbing Work along with paerapets to allow unhindered longitudinal (as per sheer attached Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58647539
AUTHORITY Government Departments
TENDER VALUE 10.92 Lakhs
LAST DATE 01-12-2026
Authority
Authority Name Cane Development And Sugar Industry
Work Description Tender for Repairing And Painting Of Godown No 3 (Farm Machinery Bank) In Samiti Campus Bhira, Lakhimpur
Basic Detail
Tender No 787/c/nirman/date18-11-2026
Bidding Type Tender
Location
City Kheri
State Uttar Pradesh
Key Dates
Publish Date 21 Nov 2026
Submission Date 01 Dec 2026
Open Date 02 Dec 2026
Finance
Tender Value 10.92 Lakhs
Tender Fee 1430
EMD 1.01 Lakhs
Exemption Not Available
Document List
7c3829ef-d9cf-4a9d-94e5-51c95a26b5bb.html
BOQ_2300883.xls
Tendernotice_1.pdf
Tendernotice_2.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 21, 2026
11:30 IST

Tender Published

Tender notice published.

Today
Dec 01, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 10 days
Dec 02, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 11 days

Tender Documents

Download All (ZIP) ↓
html

7c3829ef-d9cf-4a9d-94e5-51c95a26b5bb.html

xls

BOQ_2300883.xls

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender