Tender For Renovation Of Kitchen Shed Near Community Hall At Ward No. 01 Under Gram Panchayat, Urmilapur.
Tender Value
1.80 Lakhs
Estimated cost
Bid Submission
27 Nov 2026
5 days left
EMD
3601
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
North and Middle Andaman → Andaman And Nicobar Islands
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Kitchen Shed Near Community Hall At Ward No. 01 Under Gram Panchayat, Urmilapur.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead |
| 2 | Of area 3 sq. metres and below |
| 3 | Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead |
| 4 | Of sectional area below 40 square centimetres |
| 5 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge |
| 6 | Nominal concrete 1:3:6 or richer mix (including equivalent design) |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering – all work up to plinth level |
| 8 | 1:3:6 (1 cement : 3 pulverised sand : 6 graded stone aggregate 40 mm nominal size) |
| 9 | Centring and shuttering including strutting, propping etc. and removal of form for |
| 10 | Foundation, footings, bases of columns, etc. for mass concrete |
| 11 | 12 mm cement plaster of mix |
| 12 | 1:4 (1 cement : 4 fine sand) |
| 13 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. metres and under including cutting patch in proper shape, raking out joints and preparing and plastering surface of walls complete including disposal of rubbish to dumping ground within 50 metres lead |
| 14 | With cement mortar 1:4 (1 cement : 4 fine sand) |
| 15 | Chequered precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) |
| 16 | Dark shade pigment using ordinary cement |
| 17 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). |
| 18 | Superiour Hard wood Cat-II (B) |
| 19 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge (Note: Butt hinges and necessary screws shall be paid separately) |
| 20 | Superiour Hard wood Cat-II B – 35 mm thick shutters |
| 21 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : |
| 22 | Superiour Hard wood Cat-II B |
| 23 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete |
| 24 | Fixed to steel windows by welding (Size 25x5 mm) |
| 25 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer, of required shade and colour all old work (two or more coats) over and including water |
| 26 | Old work (one or more coats) |
| 27 | Finishing walls with Acrylic Smooth exterior paint of required shade |
| 28 | Old work (two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer) |
| 29 | Removing dry or oil bound distemper, water proofing cement paint and the like by scraping, sand papering and |
| 30 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade |
| 31 | Two or more coats on new work |
| 32 | Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade |
| 33 | One or more coats on old work |
| 34 | Applying priming coat |
| 35 | With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work (second coat) |
| 36 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with nuts and screws etc. complete |
| 37 | 250x16 mm |
| 38 | Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade |
| 39 | 125 mm |
| 40 | 100 mm |
| 41 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS |
| 42 | 200x10 mm |
| 43 | 150x10 mm |
| 44 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour and shade, with necessary screws etc. complete |
| 45 | Twin rubber stopper |
| 46 | Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 gram per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : |
| 47 | Barge board (Upto 300 mm) |
| 48 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender