Defence Statutory Bodies & Commissions/Committees Closing in 12 days TDR #58646826

Tender For Provn Of Toilet With Bathroom For Or Line At 189 Mh And Provn Of Connection Of Existing Sewage Line To Main Sewage System At Brig Enclave Under Ge Panagarh

Issued by Statutory Bodies & Commissions/Committees · Purba Bardhaman, West Bengal
Tender Value
47.55 Lakhs
Estimated cost
Bid Submission
04 Dec 2026
12 days left
EMD
95200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Purba Bardhaman → West Bengal
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Provn Of Toilet With Bathroom For Or Line At 189 Mh And Provn Of Connection Of Existing Sewage Line To Main Sewage System At Brig Enclave Under Ge Panagarh

BOQ

Name of Work:- PROVN OF TOILET WITH BATHROOM FOR OR LINE AT 189 MH AND PROVN OF CONNECTION OF EXISTING SEWAGE LINE TO MAIN SEWAGE SYSTEM AT BRIG ENCLAVE UNDER GE PANAGARH
Sl. No. Item Description
1Excavating in trenches , n.exc 1.5 m wide and n.exc 1.5 m depth for foundation etc or for shafts, wells, cesspits ,manhole pier hole, laying of cables, pipes etc n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in any kind of soil complete all as specified and directed.Note : Manual excavation to be done. During excavation if any damage occured to existing cable any type/ water pipe line, it will be contractor responsibilty to get it repair and make functional by providing jointing kit etc without any extra cost. Contractor has to repair it within 24 hrs so that essential service can not be effected due to such damage.If contractor fails to repair it within 24 hrs penalty @ Rs 500/- will be charged to contractor. In this GE decision will be final, conclusive and binding.
2All as per item No 1.00 here-in-above but depth exc 1.50 m but n.exc 3.00 mtr complete all as specified and directed.
3Excavation over area ,not exc 1.5 mtr deep and gatting out in loose/soft soil complete all as specified and directed.
4All as per item No 3.00 here-in-above but depth exc 1.50 m but n.exc 3.00 mtr complete all as specified and directed.
5M & L for sand filling under floors or in foundation including watering and consolidation. complete all as specified and directed.
6M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregates) as in bed concrete for foundation filling & mass concrete. complete all as specified and directed.
7M&L for brickwork with old size fly ash bricks straight or curved on plan to any radius built in old size bricks in CM 1:6 complete all as specified and directed.
8M&L for brickwork with old size fly ash bricks straight or curved on plan to any radius in half brick thick walls built in old size bricks in CM 1:4 complete all as specified and directed.
9Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil.complete all as specified and directed.
10Removing surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point. complete all as specified and directed.
11M&L for Steel Centering and shuttering including strutting, propping etc. and removal of form to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.
12M&L for Steel Centering and shuttering including strutting, propping etc. and removal of form to sides of pillars, posts, struts, piers, columns, and stanchions complete all as specified.
13M&L for Steel Centering and shuttering including strutting, propping etc. and removal of form to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. for fair finished surfaces of concrete complete all as specified.
14M&L for Steel Centering and shuttering including strutting, propping etc. and removal of form to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work for fair finished surface, not exceeding 200m thick (Horizontal or sloping) complete all as specified.
15M & L for reinforced cement concrete (Design Mix) M-25 (20mm graded stone aggregate) foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc. and mass concrete etc complete all as directed.
16M & L for reinforced cement concrete (Design Mix) M-25 (20mm graded stone aggregate) in columns, pillars, piers, etc. complete all as specified and directed.
17M & L for reinforced cement concrete (Design Mix) M-25 (20mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like. complete all as specified and directed.
18M & L for reinforced cement concrete (Design Mix) M-25 (20mm graded stone aggregate) in beams, cantilevers, bressummers, lintels over 1.5m span. complete all as specified and directed.
19M & L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. complete all as specified and directed.
20S&F TMT reinforcement bar, conforming to Fe-500, 5mm dia and upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends as binding with and including mild steel wire (Annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
21M&L for damp proof course 40mm thkM-20 (Nominal Mix) using 12.5mm graded crushed stone aggregate with water proofing compound conforming to IS-2645 liquid grade as per manufacturer’s instructions with and including polythene film 200 micron over and including 85/25 grade Industrial bitumen (IS-702 : 1988) @ 1.5 kg/sqm blended with the dry sand @ 0.05 cubic meter/ sqm. complete all as specified and directed.
22M&L for Rendering 15 mm thick cement plaster in CM 1:4 on fair faces of brick/concrete surfaces finished fair and even, mixed wth water proofing compound admixture (if directed) as per manufacturer's instruction, complete all as specified and directed.Note :- WPC will measuered and paid separatly under relevant item of schedule.
23Supply only liquid Integral Water proofing compound. complete all as specified and directed.
24M&L rendering 15 mm thick cement plaster in CM 1:6 on external fair faces of brick/concrete work surfaces finished fair and even complete all as specified and directed.
25M&L for 5 mm thick cement plaster in cement mortar (1:3) as on ceiling, finished fair and even complete all as specified and directed.
26Material & Labour for preparation of new surfaces of plastered walls and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm ) over plastered surfaces of walls to prepare the surface even and smooth complete all as specified . .
27M&L for preparation new plastered surfaces and applying three coat of white washing on ceiling complete all as specified and directed.
28Material & Labour for preparation of new surfaces of plastered walls and applying Two coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. over and including a coat of primer over plastered surfaces of walls complete all as specified.
29M&L for Moorum/clinker filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified.
30M&L for broken stones or boulders of hard core gauge n.exc 63mm deposited, spred and levelled in layers n.exc 15cm thick, watered and rammed to a true surfaces. complete all as specified and directed.
31M&L for 75 mm thick cement concrete M10 (Nominal Mix) with 40mm graded crushed aggregate finished even and fair laid to a slope of 1 in 12, laid in alternate bays, each bay not exceeding 3 m length with joint filled with bituminous mastic filling comprising a mixture of 1 part of heated Industrial bitumen 85/25 grade and two parts of heated sand as in plinth protection complete all as specified
32M & L for PCC (1:4:8) 100 mm thick Type D2 using 40 mm graded aggregate used as in sub base floor/pavings and finishing complete all as specified and as directed.
33M&L cement concrete type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) 25 mm thick as in floor for receiving screed bed for floor finishes. complete all as specified and directed.
34M&L for Non Skid coloured ceramic tiles 7 to 8 mm thick square/rectangular) area of each tile exceeding 0.18 Sqm but not exc. 0.38 Sqm, in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match and including over screed bed or bedding layer of mortar 15 mm thick laying floor finished in CM 1:6 complete all as specified and directed.
35M & L for vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, as in vertical walls, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including back coat of 15 mm thick cement plaster in CM 1:6 on brick or concrete surfaces complete all as specified.
36M&L for Granite (of any type) 16-18mm thick work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over screed bed or bedding layer of mortar 20mm thick in CM 1:6 complete all as specified and directed
37Rounding to edges of stone slabs exposed edge, such as in steps, cooking platform and other similar situation complete all as spd and directed.
38S&F Bib tap long body with CP nipple cast copper alloy with crutch or butterfly handle, chromium plated fancy type screwed for iron pipe, suitable for 15 mm bore complete all as specified.
39S & F 600x450 mm bavellled edge mirror of selected quility glass, mounted on 6mm thick AC building board of commercial plywood and fixed to wooden plugs with chromium plated bress screw and cup washer complete all as specified and directed.
40S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long with aluminium alloy brackets and guard rail all completed as specified.
41S&F in tubular towel rail /towel ring 20mm dia D type and 60cm long between flanges of brass chromium plated. complete all as specified and directed.
42S&F in stop valve cast copper chromium plated concealed with long shank type screwed down, high pressure with capstan head suitable for 15 mm bore complete all as specified.
43S&F 15 mm dia galvanized pipes medium grade with all fittings and fixed complete wall and ceiling or laid in floors. complete all as specified and directed.
44S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be convered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvant cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert of top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitabale PVC sheet beading, and jointed together with solvant cement, and S&F in the frame at side as per specification and drawing. complete all as specified and directed.
45S & F solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.
46M & L for Anodised powder coated aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.
47M & L for Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified.
48Sheet glass 5.5 mm thick , ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane. complete all as specified and directed.
49S & F 100 mm size butt hinges extruded aluminium alloy with galavanised mild steel hing pin anodised and fixed type C-21 complete all as specified.
50S&F 200 mm long Aluminium, anodised, barrel tower bolt of extruded section. complete all as specified and directed.
51S&F extruded aluminium handles, cast type, anodised 150 mm long complete all as specified.
52S & F 300 mm long Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy and fixed. complete all as specified and directed.
53S & F vitreous china wash down water closet (pedestal pattern), white including thermoplastic seats and covers of grade 2 type, flat with hinging device of bronze or brass with nickel chromium plating, fixing bolt, connector to flush pipe and making connections to flush pipe, connector to branch soil pipe and anti syphonage pipes etc. including sealing the joints and making leak proof using sealant complete all as specified and as directed by Engineer-in-Charge.
54S & F vitreous china squatting pan, 'Orissa\\" pattern, size 580 mm X 440 mm white with ‘P’ or ‘S” trap, front or back inlet and integral foot rests, any pattern and including fixing , connector to flush pipe, lime concrete bedding and making connections to flush pipe, connector to branch pipe and anti syphonage pipes etc. including sealing the joints and making leak proof using sealant complete all as specified and as directed by Engineer-in-Charge.
55S&F 10 ltrs PVC valveless, syphonic action type, flushing cistern, low level, white, with intel, ball valve, float and handle including brackets complete all as specified
56S&F vitreous china designer table top wash basin white, flat back, with swan neck pillar taps, waste pipe, chain and plug and including exclusive of fixing of supply and waste pipe on granite platform, complete all as specified.
57S&F PVC connection 15 mm size with PTMT nuts of length 600mm. complete all as specified and directed.
58Supply and fix PVC SWR Nahani/ Floor trap, multi inlet connection, plain with grating including jointing with solvent cement, dia of outlet 75 mm, water seal minimum 50 mm, complete all as specified and directed by Engineer in charge.
59S & F PVC (SWR) bends any radius of 75 mm bore with access door. complete all as specified and directed.
60M & L for fixing PVC (SWR) pipes of 110 mm bore diameter, type B single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified.
61S&F Vitreous China Urinal, full stall type, white (excluding flushing cistern, flush pipe and waste pipe) bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified.
62S&F 15 mm bore angle valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.
63Supply flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern complete all as specified.
64S & F soap dish, vitreous china white, approximate size 160 x 160 x 90mm complete all as specified.
65S & F PVC (SWR) bends any radius of 110 mm bore with access door.complete all as specified and directed.
66S&F 125 mm Brass Chromium Plated shower rose with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified.
67S&F 75 mm PVC (SWR) pipes single socketed, type B in any length with rubber ring joints laid in trenches or in floors complete all as directed by Engg-in-charge.
68S&F Stainless steel wire cloth ,0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.
69M & L for laying Reinforced concrete pipes 150 mm in dia, class NP2, laid and jointed complete with collars . complete all as specified and directed.
70Material and labour for cement concrete bed to drain pipe for 150mm bore of pipe including forming cradles in Cement concrete 1:3:6 Type C2 complete all as specifiedand and as directed.
71S&F health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 m long flexible tube and ABS wall hook incl making connection and fixed in position complete all as specified.
72M&L for pavings, with mix of fly ash, clinker & stone dust in the proportion of 1:3:6 (ie 10% fly ash, 30% clinker and 60% stone dust ) laying in layers n. exc 10cm thick, watering, ramming and compacted with hand/power roller 8 to 12 tonn roller to required camber and gradient complete all as directed by Engineer-in-Charge.
73M&L for PCC 1:3:6 type C-2 (40 mm graded stone aggregate) in foundation filling and mass concrete, complete all as specified and directed.
74M&L 150mm bore,HDPE double wall corrugated(DWC) SN-8 PIPE (HDPE Black Pipe) WITH COUPLER Conforming to IS:16098 Part-II:2013 sewage pipes laid in trenches and jointed as per manufacturer,s instruction with and including all fitting complete all as specified and as directed.
75M&L 200mm bore,HDPE double wall corrugated(DWC) SN-8 PIPE (HDPE Black Pipe) WITH COUPLER Conforming to IS:16098 Part-II:2013 sewage pipes laid in trenches and jointed as per manufacturer,s instruction with and including all fitting complete all as specified and as directed.
76Material and labour for cement concrete bed to drain pipe for 200mm bore of pipe including forming cradles in Cement concrete 1:3:6 Type C2 complete all as specified and as directed.
77M&L for flyash brick work with old size sub class ‘B’ bricks straight curved on plan exceeding 6 meter mean radius for manholes /septic tank /soak well etc /in sewer works with old size bricks in CM 1:4. complete all as specified and directed.
78M&L 20 mm thick rendering in cement mortar 1:4 inside and outside wall of manhole,drain,bldgs, of brick work/concrete suface even and smooth without using extra cement all as per direction by Engr-in-Charge
79S&F SFRC (Steel Fibre Reinforced Concrete) Manhole Cover with Frame n. exc 1 Sqm in size, Shape round/square, (max weight 45 Kg approx ) with 2 hooks to hold, set at the top of the manhole at site complete as per manufacturer's instruction and as directed by Engineer-in-Charge.
80M&L type B-1 1:2:4 (20mm graded stone aggregate) providing RCC precast cement concrete as in cover slab for man hole and similar article with plain face set in cement mortar 1:6. complete all as specified and directed.
81S & F PVC (SWR) reducers of 110 mm bore complete all as specified and directed.
82S&F 75mm PVC (SWR) vent cowl. complete all as specified and directed.
83S&F 110mm PVC (SWR) junction single (single T) equal or unequal complete all as specified .
84S&F 75mm PVC (SWR) junction single (single T) equal or unequal complete all as specified .
85Dismantling floor/hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed.
86M&L for coloured non skid (joint free) ceramic tiles 7 to 8 mm thick (Square /rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry and including 15 mm thick screed bed in cement mortar 1:6. complete all as specified and directed.
87M&L for coloured non skid (joint free) ceramic tiles 7 to 8 mm thick (Square /rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and including 15 mm thick screed bed in cement mortar 1:6. complete all as specified and directed.
88M&L for Chequered Cement concrete tiles 30cm x 30cm x 25mm thick, set jointed and pointed in neat cement slurry in floors over 15mm thick screed bed in cement mortar 1:4, with grey cement and pigments. complete all as specified and directed.
89S&Fin repairs vitreous china wash down water closet pan, pedestal pattern Pedestal pan and trap(excluding flushing cistern and flush pipe),connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc and including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel CP or aluminised hinging device all as specified and directed.
90S & F in repairs 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete (w/o brackets). complete all as specified and directed.
91M & L for cement concrete type B-0 1:2:4 (12.5mm graded stone aggregate) in cills, steps, plinth courses, string courses, lacing courses, parapets, copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directed rounded or chamfered on edges all as specified.
92Taking up or down steel water tubings and fittings etc complete and making good disturbed surfaces of walls/ceilings etc for 15 mm bore pipe complete including stacking aside for reuse and removal of unserviceable items from site complete. complete all as specified and directed.
93Fixing only 15mm dia bore old steel tubing after necessary cleaning, with and including all new tube fittings (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions, etc.) and fixing complete with clips, wall hooks, wooden plugs, or laying in trenches, etc and necessary connections in old position (Walls, ceiling, floors, etc.) complete all as specified and as directed.
94S&F 16 mm outer dia medium grade CPVC, SDR 11 & plain CPVC SDR 11 with all fittings (brass inside the fittings) and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
95Cutting into existing manholes 200mm dia pipe for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required complete all as specified and directed.
96Cleaning of Septic Tanks/Soak pit (diffrent capacity & locations) by opening Cover, Pumping out Sewage Water and Taking out accumulated Night Soil, Sludge’s, Brick Bats or any Other Items, (both Solid and Liquid) and removing to a distance exc 50.00 METRE but not exc. 100.00 METRE, and buried under Ground (minimum 300 mm below Ground Level), Sprinkling Bleaching Powder on deposited Sludge’s at Pit including Excavation of Pits, Returning, Filling in and dress-ing of Surplus Soil/Ground to Slope as required, again Spreading Bleaching Powder on Filled Earth and upto 1.00 METRE around the Trenches/Pit not less than 500 GRAMS PER SQUARE METRE, re-fixing the Cover after complete Cleaning of Septic Tank of following capacity & Nos, complete all as specified and as directed. Please Enable Macros to View BoQ information
97Cleaning of Septic Tanks/Soak pit (diffrent capacity & locations) by opening Cover, Pumping out Sewage Water and Taking out accumulated Night Soil, Sludge’s, Brick Bats or any Other Items, (both Solid and Liquid) and removing to a distance exc 50.00 METRE but not exc. 100.00 METRE, and buried under Ground (minimum 300 mm below Ground Level), Sprinkling Bleaching Powder on deposited Sludge’s at Pit including Excavation of Pits, Returning, Filling in and dress-ing of Surplus Soil/Ground to Slope as required, again Spreading Bleaching Powder on Filled Earth and upto 1.00 METRE around the Trenches/Pit not less than 500 GRAMS PER SQUARE METRE, re-fixing the Cover after complete Cleaning of Septic Tank of following capacity & Nos, complete all as specified and as directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58646826
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 47.55 Lakhs
LAST DATE 04-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Provn Of Toilet With Bathroom For Or Line At 189 Mh And Provn Of Connection Of Existing Sewage Line To Main Sewage System At Brig Enclave Under Ge Panagarh
Basic Detail
Tender No 8500-683/E8
Bidding Type Tender
Location
City Purba Bardhaman
State West Bengal
Key Dates
Publish Date 21 Nov 2026
Submission Date 04 Dec 2026
Open Date 05 Dec 2026
Finance
Tender Value 47.55 Lakhs
Tender Fee 500
EMD 95200
Exemption Not Available
Document List
5a409e95-f89c-4a20-adf4-45ccba8326c4.html
BOQ_897325.xls
PS683.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 21, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 04, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 12 days
Dec 05, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 13 days

Tender Documents

Download All (ZIP) ↓
html

5a409e95-f89c-4a20-adf4-45ccba8326c4.html

xls

BOQ_897325.xls

pdf

PS683.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender