Tender For Repair/ Maintenance Of Certain Roof And Parapet Walls Of Rs Area At Navy Nagar Under Age B/R-Ii , Ge (Nw) Navy Nagar, Colaba, Mumbai
Tender Value
15 Lakhs
Estimated cost
Bid Submission
11 Dec 2026
19 days left
EMD
30000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Maintenance Of Certain Roof And Parapet Walls Of Rs Area At Navy Nagar Under Age B/R-Ii , Ge (Nw) Navy Nagar, Colaba, Mumbai
BOQ
| Sl. No. | Item Description |
| 1 | M & L for cement concrete M15 (Nominal Mix) using 12.5 mm nominal size coarse aggregate in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed. |
| 2 | Supply only integral water proofing compound. |
| 3 | Material and labour for plastering 10 mm thick on fair faces of brick work or concrete surfaces (on vertical surfaces) in cement mortar 1:4 finished even and fair complete all as specified and as directed. |
| 4 | Material and labour for plastering 15 mm thick on fair faces of brick work or concrete surfaces on ceilings in cement mortar 1:3 finished even and fair complete all as specified and as directed. |
| 5 | Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MD land. |
| 6 | Demolition of existing treatment of roof/sunken any type and preparing the surface by cleaning the concrete surface with wire brush and high pressure water jet and ensure that it is free of dust, oil, grease, loose particles vegetation roots etc including dismentinling Existing water tanks, unused supports, masonry structures, debris, old pipe supports and other obstructions interfering with the waterproofing work shall be carefully dismantled and refix after water proofing complete all as specified and directed by Engr-In-Charge. |
| 7 | Supply and Application of 5 Layer SHR Waterproofing Coating System as per manufacturer application procedure on leaking concrete roof surface by thorough surface preparation with high pressure water jet min. 125 bars, opening the cracks, followed by one absorption coat of nano-tech enhanced elastomeric waterproofing (NEEWP) emulsion having UV resistance and min. 50% solids, filling and sealing the cracks, then over coating with 2 Coats of NEEWP + Cement mixture as waterproofing coat having +450% Elongation. The surface is then to be tested for water tightness with ponding test for min. 2 days and then top-coated with 2 Coats of SHR Coating - pure acrylic based, UV resistant, non-yellowing, bio-organism resistant (anti-fungal, anti-bacterial) conforming to BIS STD IS 17218:2019 with Pull off Adhesion 2.8 Mpa, passes 2500 hrs accelerated durability test, SRI 102 and other tests as specified, suitable for all types of cementitious surfaces, white colour, matt, surface coverage 3.25 SQM/Ltr/2 Coats, DFT 120 +/- 20 microns using brush, roller, airless spray gun as applicable. The generic product should be GRIHA certified and tested at NABL approved lab. Note- 1)The product should have performed in similar condition in similar organization for min 5 season, warantee shall be issued from the company for the same before payment of RARs. 2) The application is to be done by company approved applicator only and documents of the same shall be kept on records. |
| 8 | M&L of 5 Layer SHR Waterproofing Coating System as per manufacturer application procedure on leaking concrete wall surface by thorough surface preparation with high pressure water jet min. 125 bars, opening the cracks, followed by one absorption coat of nano-tech enhanced elastomeric waterproofing (NEEWP) emulsion having UV resistance and min. 50% solids, filling and sealing the cracks, then over coating with 2 Coats of NEEWP + Cement mixture as waterproofing coat having +450% Elongation. The surface is then to cured for min. 1-2 days as needed and then top-coated with 2 Coats of SHR Coating - pure acrylic based, UV resistant, non-yellowing, bio-organism resistant (anti-fungal, anti-bacterial) conforming to BIS STD IS 17218:2019 with Pull off Adhesion 2.8 Mpa, passes 2500 hrs. accelerated durability test and other tests as specified, suitable for all types of cementitious surfaces, white colour, matt, surface coverage 3.25 SQM/Ltr/2 Coats, DFT 120 +/- 20 microns using brush, roller, airless spray gun as applicable. The generic product should have GRIHA/IGBC certificate and should have been tested at IIT or NABL approved lab. The product should have performed in similar condition in similar organization for min 5 season. Note- 1)The product should have performed in similar condition in similar organization for min 5 season, warantee shall be issued from the company for the same before payment of RARs. 2) The application is to be done by company approved applicator only and documents of the same shall be kept on records. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysDec 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender