Tender For Supplying Installing Testing Commissioning And Handing Over Of Air Cooled Ductable Air Conditioners (Hot & Cold) In Place Of Old Ductable Units At Go Mess And Multipurpose Hall In Police Line Sector-26, Chandigarh.
Tender Overview
Project Description
Tender for Supplying Installing Testing Commissioning And Handing Over Of Air Cooled Ductable Air Conditioners (Hot & Cold) In Place Of Old Ductable Units At Go Mess And Multipurpose Hall In Police Line Sector-26, Chandigarh.
BOQ
| Sl. No. | Item Description |
| 1 | EQUIPMENT . |
| 2 | INVERTER DUCTABLE ACS (Hot & Cold) .NSR |
| 3 | Supply, Installation, Testing and Commissioning of Air Cooled Inverter Ductable Split units with scroll/Rotary Compressor working on R410a/R32 refrigerant.factory fitted electronic expansion valve , Inbuilt Drain Pump Provision,The prices should include any lifting, shifting and positioning of outdoor units including painted MS Stands. The unit shall be charged or any top-up gas/oil required should be included in the individual price quoted below. This shall include the nitrogen leak testing, oil charging, vaccumisation, TF quality Canvass Connection b/w Indoor & duct.The outdoor unit shall be a factory assembled and unit housed in a sturdy weather proof casing constructed form rust-proofed mild steel panels with powder coated finish. . |
| 4 | Preferably The heat exchanger for Outdoor shall be constructed with Copper tubes mechanically bonded to aluminium fins to form a cross fin coil. The Condenser fins must be coated with Anti-corrosive treatment. . |
| 5 | Insurance of Units ,Unloading at site, placement of Outdoor Units on the foundation,stands, co-ordination during execution, rendering necessary guidance for execution, supervision, testing, commissioning and startup of above mentioned by OEM. . |
| 6 | Note: The civil foundations reqd shall be made by the Vendor/Contractor . |
| 7 | 11 TR( Hot and Cold -3%) or better technology . |
| 8 | 5 TR( Hot and Cold -3%) or better technology . |
| 9 | 3.5 TR( Hot and Cold -3%) or better technology . |
| 10 | Make: Daikin,Voltas, Blue Star, Carrier,LG or any approved make as per approved make list. . |
| 11 | PIPING . |
| 12 | Refrigerant Piping . |
| 13 | Supply and Installation of Interconnecting Refrigerant Piping of various sizes as required for the full functionality of the ductable system including refnet joints etc. complete in all respects duly insulated with closed cell nitrile rubber class 'O' of K-Flex,Armacell,A-Flex with UV barrier film as per specifications of the manufacturer. the contractor shall submit a detailed drawing approved by the manufacturer showing the piping sizes & layout to be followed at the site after the allotment of work the contractor shall also get the drawings showing outdoor units in connection with indoor units approved from the department in original from and then the head office of the manufacturer with a certificate stating that the piping layout is as per company specifications for full functioning of the system. all piping shall be run in cable trays in interior and for .NSR |
| 14 | exterior there shall be a cable tray both at the bottom and the top. all support system required for the installation of cable trays in interior or exterior shall be in the scope of the HVAC contarctor and nothing extra shall be paid for it. All HVAC piping , drainage and Cabling etc shall run at a height of 6 inches below RCC slab or as per site requirment on continuous cable tray of appropriate sizes. all R.C.C structure shall be core cut to allow for passage of pipes etc & filled back with expanded polyurethene foam or any cement or plaster. rates quoted are inclusive of core cutting etc complate in all all respects including painting in desired colour. on exterior side the cable tray shall be mounted on top & bottom side for added protection. Refrigerant Copper Pipe Make : Totaline,Mandav,Rajco,Maxflow or any approved make as per approved make list. . |
| 15 | 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 13 mm thick insulation . |
| 16 | 28.6 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation . |
| 17 | Factory fabricated Duct-GI OVALduct . |
| 18 | SITC of Factory fabricated Powder Coated Spiral Oval Duct Pre/site Insulated from Inside with 9.0mm thick Nitrile 'O' Class Insulation (payble separately) fabricated GSS Ducting complete with hanging arrangement of fasteners, GI threaded rods of sizes:. However The duct shall be fabricated at site for to make Collors/bends/plenums/suit pieces Only .NSR |
| 19 | 0.63mm (24 gauge) GSS . |
| 20 | 0.80mm (22 gauge) GSS . |
| 21 | Sheet Make : Ductofab, Rolastar,ADS,zeco ( Sheet Make Sail /Tata ) or any approved make as per approved make list. . |
| 22 | DUCT LINE THERMAL INSULATION Class O (Inside Conditions) . |
| 23 | Duct Insulation . |
| 24 | Supplying , installation, testing & commissioning of thermal insulation closed cell antifungus, anti-microbial elastomeric nitrile rubber (CFC/HCFC FREE) and density of insulation 45-75 Kg/m3 ,ANTI MICROBIAL/ANTI FUNGAL,Class 'O' material . Make: K-Flex,Armacell, Aflex,Aerolam.The product shall have temperature range of -40oC to 105oC.as per specifications and approved shop drawings .NSR |
| 25 | 13 mm Thick Closs O . |
| 26 | MECHANICAL INSULATION . |
| 27 | DUCT LINE ACOUSTIC TREATMENT . |
| 28 | Supply, Installation, Testing and Commissioning of Acoustic lining inside ducts/plenum using open cell nitrile rubber foam having microban anti-microbial/ anti fungal product protection and of 160-180 kg / m³ density as per ASTM D3575, class 1 ratingn As per BS476,PART-7, cut to required sizes and to be stuck to the inside of duct surfaces with adhesive as approved by the manufacturer. (Rubber based solvent). as per specifications .NSR |
| 29 | 10mm thick sound board . |
| 30 | Condensate Drain Piping: . |
| 31 | Providing and Fixing of Hard PVC (10KG/CM2) pipes of various sizes for condensed water drainage from Indoor unit to nearest disposal point in toilet/ outside rain water harvesting system as approved by architect/ consultant/Client .NSR |
| 32 | All necessary ,Supports ,civil works like cutting & chasing of walls/ floor/glass etc. and make them good thereof . |
| 33 | 32 MM dia with 6mm Class O Nitrile Insulation . |
| 34 | 25 MM dia with 6mm Class O Nitrile Insulation . |
| 35 | Make : Diplast/Polypack/Astral or any approved make as per approved make list. . |
| 36 | Power & Control Works . |
| 37 | Supplying and laying of following 1100 volt grade PVC insulated sheathed copper conductor armoured cables in trenches, on walls clamped to wall with suitable clamps, saddles, and fixing bolts, or laying in ground including cost of digging brick and sand protection, and including jointing / connecting / terminating, testing and commissioning : .NSR |
| 38 | 4C x 25Sq. mm Copper (armoured) Conductor . |
| 39 | 4C x 6Sq. mm Copper (armoured) Conductor . |
| 40 | 4C x 2.5 Sq. mm Copper (armoured) Conductor . |
| 41 | Make : Havell's,Eko,Finolex,Polycab or any approved make as per approved make list. . |
| 42 | For Indoor Units, . |
| 43 | Providing & fixing of electrical supply Shielded Cabling of 2 core x 1.5 sq. mm copper in suitable conduits between IDU & Room DB/Power Plug. .NSR |
| 44 | Providing & fixing of electrical supply Shielded Cabling of 4 core x 1.5 sq. mm copper in suitable conduits between IDU & Room DB/Power Plug. . |
| 45 | Make : Havell's,Eko,Finolex,Polycab or any approved make as per approved make list. . |
| 46 | Main Electrical Panel-1 (CPRI Approved) . |
| 47 | Design,Supply,Installation,Testing and Commissioning Electrical Main Panel weather Proof outdoor Type Powder Coated Made out of TATA/ SAIL/ ESSAR/JINDAL/ Reputed make sheet having thickness 2.0 mm for load bearing surfaces & 1.6 mm Non bearing surfaces duly processsed powder coated having Siemens grey colour or as approved by client or department (Outdoor Type with weatherproof canopy design)as per following specifications complete in all respect . .NSR |
| 48 | INCOMING SUPPLY . |
| 49 | Upto 200Amps, 3Pole MCCB, 50 KA with Microprocessor release.The MCCB shall be double break & the ICS=100% ICU = 1 Nos Make : Schneider/ Siemens/ ABB . |
| 50 | Spreader Link with phase Barriers = 4 Sets Make : Schneider/ Siemens/ ABB . |
| 51 | Rotary Mechanism = 1 Nos Make : Schneider/ Siemens/ABB . |
| 52 | Metering Section . |
| 53 | Load Manager EM6400NG with RS485 Port or Equivalent (Class 1.0, with RS485 Port, with Paramenters V, Amp, PF, % THD, F,W,WH,VA,VAH,VAR,VARH, Runhrs, ON hrs, Interupts = 1No. . |
| 54 | Make : Schneider/ Secure/ Siemens/ ABB/ Elmeasure . |
| 55 | Control MCB SP C Curve= 3 Nos Make : Schneider/ Siemens/ ABB . |
| 56 | CT's 300/5 = 3 Nos Make: AE/ Essma/ Newtek/ Selec . |
| 57 | Indication Lamps LED Type RYB = 3 Nos Make : ABB/ Schneider/ Siemens/ L&T/ Reputed . |
| 58 | Outgoing Feeders for 11 TR ductable units - (7 Nos + 1 Spare ) . |
| 59 | MCB TPN 63 Amps C Curve 35 KA. The outgoing feeder of the individiual unit shall be provided with on/off indicators, start/ stop button, single phase preventer alongwith all contractor blocks required for operation of the units alongwith control system required in the panel as per OEM specifications. . |
| 60 | Outgoing Feeders for 3 TR and 5 TR - (8 Nos + 1 Spare ) . |
| 61 | MCB TPN 40 Amps 35 KA. The outgoing feeder of the individiual unit shall be provided with on/off indicators, start/ stop button, single phase preventer alongwith all contractor blocks required for operation of the units alongwith control system required in the panel as per OEM specifications. . |
| 62 | Panel . |
| 63 | Fabrication of Powder Coated Enclosure made out of TATA/SAIL/ESSAAR/JINDAL/Reputed make CRCA sheet having 2 mm for load bearing surfaces & 1.6 mm for non load bearing surfaces ,duly processsed powder coated having Siemens grey colour. (Outdoor Type with weatherproof canopy design) . |
| 64 | Assembly charges of Aluminium Bus Bar 250A TPN Electrolite grade E91 having Suitable cross section Phase & Neutral & Current carring capacity 1 A/Sq. mm2. inclusive of Insulators, colour coded Heat shrinkable Insulation sleeve (RYBN) . |
| 65 | Assembly of Hardware (PVC Channels/MCB Channels/Fibre-Glass/Gaskits/nuts/Bolts/washers/ Terminal blocks, etc) . |
| 66 | Complete Wiring inclusive of control wiring, power wiring, Aluminium Solid connections/ interconnections including insulators, thimbles,etc . |
| 67 | Unloading at site, placement of Panel on the foundation, co-ordination during execution, rendering necessary guidance for execution, supervision, testing, commissioning and startup of above mentioned Panel. . |
| 68 | Panel Make : ABB/Adlec/Siemens/Tricolite/Unitech Power System/ Electricals/KEPL/International Switch Gears Pvt. Ltd/Vrindavan Electricals or any approved make as per approved make list. . |
| 69 | Supplying, laying (saddling on slabs walls/ columns and connecting the following continuous earth conductors. Note: Any joint in the GI earth conductor shall be made by the process of brazing. .NSR |
| 70 | GI 8 SWG wire earthing complete with thimbles etc . |
| 71 | Supplying & installing following sizes of perforated Hot Dipped Galavanised Iron cable tray (Galavnisation thickness not less than 50 microns) with perfoaration more than 17.5 % in convenient sections, joined with connectors, suspended from ceiling with GI suspenderes including GI Bolts & nuts etc. as required (U Shaped Tray) .4.6 |
| 72 | 300mm(W) x 50 mm(D) and 1.5 mm Thickness .4.6.4 |
| 73 | 150mm(W) x 50 mm.(D) and 1.5 mm Thickness .4.6.2 |
| 74 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. .5.6 |
| 75 | Providing and fixing earth bus of 50 mm X 5 mm copper strip on surface for connections etc. as required .5.2 |
| 76 | Hot dipped Galavnised Iron Cable Tray . |
| 77 | DUCTING, GRILLS,DIFFUSER AND INSULATION .30.12 |
| 78 | Supplying, installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular/ round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports, bends, transitions, reducers, end caps, collars etc as required complete in all respect in confirmation with IS : 655 and approved drawings and specifications of following sheet thickness complete as required .30.12.2 |
| 79 | Thickness 0.63 mm sheet .30.12.2.1 |
| 80 | Thickness 0.80 mm sheet .30.12.2.2 |
| 81 | Sheet Make: Tata, Sail, Jindal . |
| 82 | Grilles/Diffusers/Dampers . |
| 83 | Supply, installation, testing and commissioning of GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications .30.13 |
| 84 | Supplying & fixing of powder coated extruded aluminium Supply Air Grills(curved/Flat) with aluminium volume control dampers as per specifications .30.15 |
| 85 | Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but without volume control dampers complete as required .30.16 |
| 86 | Supplying, Fixing,testing and commissioning of fire dampers in supply air duct/main branch and return air path as and where required of required sizes i/c control wiring,the damper shall be motorized and spring return so as to close the damper in the event of power failure automatically and open the same in case of power being restored. The spring return action shall be inbuilt mechanism and not externally mounted. The damper shall also be closed in the event of fire signal complete as required and as per specifications. .30.2 |
| 87 | Fire damper .30.20.1 |
| 88 | Actuator .30.20.2 |
| 89 | Make:SystemAir/Caryaire/Swirlair/Pinair . |
| 90 | Providing and fixing 25mm thick pre-laminated medium density fibre board exterior grade (Grade-I) IS:14587:1998 marked with one side decorative and other side balancing lamination for cupboard shutters edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand including ISI marked nickel plated bright finishing M.S. piano hinges conforming to IS:3818 marked with necessary screw etc all complete. .Civil DSR 2023 9.159 |
| 91 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : .12.45 |
| 92 | 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) .12.45.1 |
| 93 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/ making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. .12.52 |
| 94 | GI Metal Ceiling Lay in plain Tegular edge Global white colour tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. .12.52.1 |
| 95 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. .13.26 |
| 96 | AMC FOR 05 YEARS AFTER DEFECT LIABILITY PERIOD OF 24 MONTHS (02 YEARS) FROM THE DATE OF HANDING OVER THE SYSTEM. . |
| 97 | Comprehesive Maintenance charges for Air Conditioning system including (routine and preventive maintenance with parts including consumables such as gas, oil, filters) and break down maintenance of high & low side of the air conditioning system comprising of all the machinery during THREE years after expiry of Two year defect liablity period. . |
| 98 | Maintainence . |
| 99 | 3rd year (1.5 % of Capital Cost) . |
| 100 | 4th year (1.5 % of Capital Cost) . |
| 101 | 5th year (1.5 % of Capital Cost) . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender