Defence Statutory Bodies & Commissions/Committees Closing in 19 days TDR #58646539

Tender For Providing Of 03 X Jco Single Living Accn At 2 Garh Rif In Mil Stn Bhuj Under Ge (A) Bhuj.

Issued by Statutory Bodies & Commissions/Committees · Kachchh, Gujarat
Tender Value
37.21 Lakhs
Estimated cost
Bid Submission
11 Dec 2026
19 days left
EMD
74420
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Kachchh → Gujarat
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Providing Of 03 X Jco Single Living Accn At 2 Garh Rif In Mil Stn Bhuj Under Ge (A) Bhuj.

BOQ

Name of Work:- PROVN OF 03 X JCO SINGLE LIVING ACCN AT 2 GARH RIF IN MIL STN BHUJ UNDER GE (A) BHUJ.
Sl. No. Item Description
1Excavation in trenches n.exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in any type of soil complete all as specified and as directed.
2Excavation in trenches exceeding 1.5m but not exceeding 3.00 m in depth for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in any type of soil complete all as specified and as directed.
3M&L PCC 1:4:8 type D2 (40 mm graded aggregate) in foundation filling and mass concreteetc complete etc complete all as specified and as directed.
4M&L for precast cement concrete block masonry with solid blocks of PCC (1:3:6) (using 20mm and 12.5 mm graded stone aggregate in the proportion as directed) exc 10cm in width and set and jointed in Cement Mortar (1:6) complete all as specified and directed.
5M&L for Form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides of soffits (if any) of foundations and plinth beams and similar work etc; rough finish surfaces complete all as specified and as directed.
6M&L for Form work to sides of concrete pillars, posts, struts, piers, columns and stanchion etc; rough finish surfaces complete all as specified and as directed.
7M&L for Form work to sides and soffits of floor or roof RCC beam sides of lintel beam flat rough finish surfaces to receive the plaster, complete all as specified and as directed.
8M&L for Formwork for chullah hoods, chajjas through and similar items including edges, surface rough finish surfaces to receive the plaster, complete all as specified and as directed.
9M&L for Form work to soffits of suspended slabs such as roof slabs, landings and similar work; not exceeding 200mm thick (horizontal or sloping), rough finish surfaces complete all as specified and as directed.
10M&L for Form work to edges of concrete flats, floor and roofs not exceeding 20cm wide (horizontal or sloping), rough finish surfaces complete all as specified and as directed.
11M&L for providing RCC design Mix M-30 (using 20mm graded stone aggregate) as in foundations, including raft footings, foundations beams, plinth beams, bases of columns etc; complete all as specified and as directed.
12M&L for providing RCC design Mix M-30(using 20mm graded stone aggregate) as in columns, pillars, piers, posts and struts etc; complete all as specified and as directed.
13M&L for providing RCC design Mix M-30(using 20mm graded stone aggregate) as in beams, lintel up to 1.5m clear span, lintel bands etc; complete all as specified and as directed.
14M&L for providing RCC design Mix M-30 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in roof, landings, balconies, canopies and in shelves etc; complete all as specified and as directed.
15M&L for providing RCC design Mix M-30 (using 20mm graded stone aggregate) as in chajjas etc; complete all as specified and as directed.
16M&L for Reinforcement 10mm dia and over TMT bars cut to length, bent to shape required and binding with MS wire not less than 0.9mm dia or securing with clips complete all as specified and as directed.
17M&L for Reinforcement 8 to 10mm dia TMT bars cut to length, bent to shape required and binding with MS wire not less than 0.9mm dia in stirrups complete all as specified and as directed.
18M&L for carrying out water proofing treatment for roofs in the following stages -(i) Rendering 10mm thick in 1:4 mixed with integral water proofing liquid all as per manufacturer's instructions over concrete surfaces finished even and smooth with out using extra cement. (ii) First coat of bitumen primer confirming to IS 3384 @0.300 Kg/ Sqm over plastered surafces(iii) Second layer of 3.0 mm thick APP modified polymeric membrane with centre core of Single non woven polyster reinforcement and having weight 3 Kg/ Sqm with mineral gravel finish on top complete laid with blown type bitumen grade 85/25 @ 1.20 Kg/ Sqm complete all as specified and as directed. (iv) Applying two coats of aluminium paint on roof or vertical surfaces complete all as specified and directed.
19Supply only integral water proofing liquid ISI marked complete all as specified and as directed.
20Returning,filling in,including spreading,levelling,watering and well ramming in layers not exc 25 cm each layer in hard/dense soil all as specified and directed.
21Removing excavated soil n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point all as specified and directed.
22M&L for 15 mm thick rendering on fair faces of brick/block work or concrete wall surfaces in CM 1:4 finished fair and even all as specified and as directed.
23M&L for rendering 10 mm thick in CM 1:6 finished even without using extra cement over fair faces of brick/block work or concrete wall surfaces all as specified and as directed.
24M&L for 10mm thick rendering in CM 1:3 on ceiling surfaces finished surfaces even and smooth without using extra cement complete all as specified and as directed.
25M&L for 75mm thick PCC 1:3:6 type C-2, (40mm graded stone aggregate) as in sub floor, sub bases, floor and paving etc; complete all as specified and as directed.
26M&L for PCC 1:2:4 type B0 25 mm thick using 12.5mm graded stone aggregates as in sub floors/base floors under tiles as in levelling course etc complete all as specified and as directed.
27M&L for Virified Ceramic tiles light shade 8 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement tomatch over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed.
28M&L for Virified Ceramic tiles light shade 8 mm thick (square/ rectangular) as in skirting / dado, cut out of ceramic tiles of size exceeding 0.42 sqm but not exceeding 1.0 sqm, (Matching with floor tile of the same room) set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and as directed.
29M&L for non skid ceramic coloured tiles of approved shade and pattern, 7 to 8 mm thick , area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm laid in floor, set and jointe (square/ rectangular) in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed.
30M&L for glazed ceramic coloured tiles of approved shade and pattern of size 350x 250x7mm/ 450X350X7mm/ 300X450X7 to 8mm thick or any other nearer size as approved by Engineer incharge in vertical surface set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in CM 1:4 as in backing coat of tiles complete all as specified and as directed.
31M&L for mirror polished machine cut Kota stone slab 20 mm thick in riser of steps, skirting, dado and pillar laid over and including 10mm thick rendering in CM 1:4 and jointed complete all as specified and as directed.
32M&L for 16 -18mm thick granite (colour as approved) work (table rubbed and polished) in steps, shelves, jambs, pillars, window-cills,chowkhats, cooking platforms (vertical/ horizontal) and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 10mm thick screed bed or bedding layer in CM 1:4 complete all as specified and as directed.
33M&L for cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in plinth protection, 50 mm thick, surfaces finished even and fair without using extra cement including provision of construction joints complete all as specified and as directed.
34S & F Powder coated Aluminium alloy sections sliding windows with frames Series-C (20mm) and , 3 track sliding shutters duly fitted with neoprene beading, glazing clips, shutters with tinted glass 5mm thick and stainless steel wire cloth 0.36mm dia and average width of aperture 1.4mm , aluminium alloy handles etc. complete all as specified and directed.
35M & L powder coated aluminium deco grill medium grade of mesh size 75mmx75mm with 6mm square anodised aluminium bars fixed with aluminium frame of size 9x9x1 mm complete all as specified and as directed.
36S&F powder coated aluminium anodised ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm incl necessary channel frame work, including rubber gasket and aluminium beading complete all as specified and as directed.
37S&F of framed work as in doors chowkats of MS angle iron or MS hollow square/ rectangular any type/ size with gusset plates, rails, braces,cooler stand, Guard bars , grills ,railings, chajja framed complete drilled for fixing of door etc; to be prepared for hanging with and including hold fasts and locking arrangements confirming to FE- 290 (Gde-E- 165) complete all as specified and directed .
38S&F of factory made 30 mm thick flush door shutters with solid core construction particle board core, both face is covered with deco rative face veneer with lipping/frame to match, kiln seasoned and chemically pressure treated complete all as specified and as directed.
39S&F of factory made 30 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) kiln seasoned and chemically pressure treated complete all as specified and as directed.
40S&F of galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified & as directed.
41S&F of 100 mm size Butt hinges, heavy weight, cold rolled mild steel, and fixed (as approved by Engineer incharge), complete all as specified and as directed.
42S&F of factory made solid panel PVC door shutters 30 mm thick (style) single side prelaminated SPD consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing S&F. Make : Rajshree Doors or equivalent as approved by GE.
43S&F of solid PVC door frame of single side prelam size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing. Make : Rajshree Doors or equivalent as approved by GE.
44S&F 100 mm long butt hinges stainless steel medium weight and fixed to wooden or PVC frame fixed in repairs by stainless steel screw complete all as specified and as directed.
45S&F of alluminium anodised handles 150 mm long fixed to doors, complete all as specified and as directed.
46S&F Aluminium anodised, barrel tower bolts 150 mm long of extruded section and fixed , complete all as specified and as directed.
47S&F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.
48M & L applying two coats of synthetic enamel paint on steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of surfaces complete all as specified & directed.
49M & L applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified & directed.
50M & L for preparation of newly plastered surfaces of wall and applying two coat of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and directed.
51Material & Labour for preparation of old/new wall surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.
52M&L for preparation of new plastered surfaces of ceiling etc. & applying three coats of lime white wash on ceiling complete all as specified and as directed.
53M&L for preparation of new plastered surfaces of wall etc. & applying three coats of lime white wash on walls complete all as specified and as directed.
54Material and labour for treating the soil under plinth protection at the rate of 5 liter of emulsion per square meter of surface area complete all as specified and as directed.
55Material and labour for anti termite treatment along top surface of filled earth at rate of 5 litr per sqm complete all as specified and as directed.
56M&L Treating the back fill in contact with foundation at the rate of 7.5 liter of emulsion per square meter of vertical surface (Area of the sub structure in contact with back fill to be measured) complete all as specified and as directed.
57M&L Treating at Junctions of the Wall and the Floor with foundation at the rate of 7.5 liter of emulsion per square meter of vertical surface complete all as specified and as directed.
58M&L Treating the soil along with external perimeter of building at a rate of 2.25 litr of emulsion per meter of perimeter of wall complete all as specified and as directed.
59Supply and fixing decorative type curtain rod stainless steel finish of pipe 22 to 25 mm dia as per sample approved by GE complete all as specified & directed.
60Supply and fixing of purpose made brackets trade pattern for decorative type curtain rods suitable for holding 22 to 25 mm dia as per sample approved by GE complete all as specified & directed by Engineer-in-charge.
61Supply and fixing decorative fincals (round type with mirror optic finish) trade pattern for decorative type curtain rods suitable for 22 to 25 mm dia curtain rods as per sample approved by GE's complete all as specified & directed.
62S&F 500 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl fixing arrangment for inlet/outlet/overflow & vent pipe of standard size complete all as specified & directed.
63S&F Ball brass valves , high pressure , with polythene float and fly nut complete & high-density plastic ball , suitable for 20 mm bore pipe, screwed for iron pipe and fixed complete all as specified and as directed.
64S&F vitreous China wash down water closet pan (Pedestal Pattern), white including white plastic seat cover with mild steel CP hinging device, suitable brass CP wash jet with 1.00 to 1.50m long tube incl making connection to inlet flush pipe, & to 'P' or 'S' drain trap, incl supply of long special 'P' or 'S' trap fixed complete all as specified and directed.
65S&F PVC valve-less, syphonic action type, flushing cistern, low level, 10 litre capacity (ISI marked) white with inlet, ball valve, float and handle, flush pipe of polyethylene pvc 32mm dia high or low density including brackets complete all as specified and directed.
66S&F PVC connections 15 mm dia and 450 mm long with brass nuts complete all as specified and as directed.
67S & F Vitreous china under/over counter wash basin, white colour, oval shape, size 550x400mm including CP waste fittings coupling , 32mm bore size, bottle trap 32mm of suitable size/ bore and fixed over marble/granite or RCC plateform including necessery cutting accourding wash basin shape/ size etc; and making good disturbed surfaces to match with the existing complete all as specified and as directed.
68S&F Bib taps , cast copper alloy screwed down high pressure with crutch or butter fly handle fancy type long body CP for 15mm dia bore GI Pipe or for brass ferrule and fixed complete all as specified and as directed.
69S&F Stop valves, fancy type chromium plated ISI marked , cast copper alloy, screwed down high pressure for 15 mm bore dia GI tubing pipe, high pressure, with crutch butter fly handle complete all as specified and as directed.
70S &F 25 mm dia stop valves, cast copper alloy with screw down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union & fixed of 25mm dia complete all as specified & directed.
71S&F pillar taps of cast copper alloy with capstan heads chromium plated fancy type screwed down high pressure with long swan shanks and fly nuts screwed for iron pipe, 15mm bore fancy type complete all as specified & directed.
72S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified complete all as specified and directed.
73S & F CP wall mixer 3 in 1 system including 1.5 m long teleshower and overhead shower of size 150 x 150 mm with wall flange ISI mark complete all as specified and directed.
74S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified & directed.
75S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified & directed.
76S&F PVC (SWR) floor trap 75 mm bore, plain with grating including jointing with solvent cement complete all as specified and directed.
77S&F PVC (SWR) bends, 110 mm bore, any radius with access door complete all as specified and directed.
78S&F PVC (SWR) bends, 75 mm bore, any radius with access door complete all as specified and directed.
79S&F PVC (SWR) Junction, single, (single T) equal or unequal with access door, 110mm bore, complete all as specified and directed.
80S&F PVC (SWR) Junction, single, (single T) equal or unequal with access door, 75 mm bore, complete all as specified and directed.
81M&L for PVC (SWR) vent cowl, 110 mm bore complete all as specified and directed.
82M&L for PVC (SWR) vent cowl, 75 mm bore complete all as specified and directed.
83S&F (concealed / open) 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified complete with fitting including taking down existing GI tubing 20mm bore. complete all as specified and as directed.
84S&F (concealed / open) 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified complete with fitting including taking down existing GI tubing 25mm bore complete all as specified and as directed.
85S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed.
86S&F PVC cabinet size 650 x 400mm, comprising of looking glass, space for bath soap, shampoo, tooth brush and paste, handle towel rail complete allas specified and as approved of any fo floowing Makes :- HINDWARE / CERA / NEYCER / PARRYWARE/CLASSIC complete all as specified and directed.
87S&F tubular towel rail 20mm dia brass chromium plated `D' type 60cm long with bracket and fixed complete all as specified and as directed.
88S&F MS chromium plated peg set of 05 fixing with wall complete all as specified and as directed.
89S&F as in Corner Glass shelf 250mm superior quality with CP tubular framing & brackets complete all as per sample complete all as specified and as directed.
90S&F Soap dish any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed.
91S&F 18 mm thick prelaminated PVC Cheluka ply prelaminated one side with decorative choice lamination and other side plain fixed with screws to PVC celuka ply works all as directed and as per manufacture instructions Make : Rajshree plasticwood
92S&F 18 mm thick prelaminated PVC Cheluka ply prelaminated both side plain fixed with screws to PVC celuka ply works all as directed and as per manufacture instructions Make : Rajshree plasticwood
93Surface dressing n.exc 15cm deep including clearance of bushes & shrubs etc in soft/loose soil complete all as specified and as directed.
94Removing excavated soil to a distance exc 250metre and nexc 500 metre and depositing where as directed at a level n.exc 1.5 metre above the starting point complete all as specified and as directed.
95Surface Excavtion n exc 30 cm deep and average 15 cm deep and getting out soft/loose soil complete all as specified and directed
96M & L for hardcore of gauge not exceeding 63 mm of broken stones and boulders deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface all as specified and directed.
97M & L 100 mm thick plain cement concrete type D 2 1;4:8 (Using 40 mm grade stone aggregate ) as in sub base complete all as specified and as directed.
98M & L Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete.complete all as specified and as directed.
99S&F providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line,level and curvature,jointed with cement mortar 1:3,including making joints with or without grooves(thickness of joints except at sharp curve shall not to more than 5 mm),including making drainage opening wherever required complete all as specified and as directed.
100M&L for preparation of new or previously untreated surfaces of concrete over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed.
101Earth work in excavation in soil by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m complete all as specified and as directed.
102M&L brickwork with old size flyash bricks straight or curved on plan exc 6 m mean radius built in CM 1:4 complete all as specified and directed.
103M&L for PCC (1:2:4) Type B-1 using 20 graded stone aggregate as in surface channel and benching of manhole complete all apecified and directed.
104M&L for rendering cement plaster 15 mm thick in double layer (First layer shall be 10 mm thick in cement : sand (1:6) and second layer shall be 5 mm thick CM (1:4) with liquid water proofing compound on brick work or concrete surfaces, complete all as specified and directed. Note: WPC shall be measured and paid separately.
105Extra for forming fair finished drain or channel 30 CM inner girth in cement concrete,using ex-tra cement,including forms,moulds,mi-tred/stopped ends etc. Complete all as specified and as directed.
106M&L precast RCC 1:2:4 type B1 using 20mm graded stone aggregate as in landings, cover slab,chajjas etc.and similar articles with plain faces set in CM 1:4 complete all as specified and directed.
107M & L form work to edges of roughed finished surfaces of concrete flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide complete all as specified & directed.
108Supplying, fixing, jointing and testing reinforced concrete drain pipes 150 mm bore, class NP3, laid and jointed with collar in CM 1:1 complete all as specified and directed.
109M & L for concrete bed to drain pipes in PCC 1:4:8 type D-2 (using 40 mm graded stone aggregates) including packing under and hauching against the side of the pipes after they are laid tested for pipes of 150 mm dia complete all as specified and directed.
110Returning filling in including spreeding, leveling, watering and well ramming in layers n. exc 25 cm thick in soft /loose soil complete all as specified and as directed.
111M&L for Point wiring complete with FRLSH PVC insulated unsheathed , 1100 V grade conforming to IS 694 , 1.5 Sqmm (Norminal area) multistranded ,copper conductor cable drawn through in non metallic rigid PVC conceled/surface conduit medium grade ,minimum 20 mm dia, ISI Marked, with sutaible size of 1 to 8 module metal flush boxes and back plate for mounting of modular switches/socket and regulators and including modular fornt plate with all acessories complete all as specified and as directed.
112(a) One light point controlled by one way one switch SP 5 Amps ,240 V.
113(b) One ceiling/exhaust fan point controlled by one way one switch SP 5 Amps, 240 V.
114(c) One switch socket outlet 3 Pin, 5 Amps, SP on independent board.
115(d) One switch socket outlet 3 Pin, 5 Amps, SP on same board.
116All as per the above item No 1 herein before but with 2.5 Sqmm cable for 3 Pin 5/15 Amps switch socket outlet complete all as specified and as directed.
117S&F modular switch one way 6 Amps , 1 module type complete all as specified and as directed.
118S& f modular socket , 6 Amps , 2/3 pin combined 2 module complete all as specified and as directed.
119S& f modular switch socket combination, 6 Amps / 16 Amps , 2/3 pin combined 3 module complete all as specified and as directed.
120S&F ceiling rose surface backlite 65 x 20mm size three terminal ISI marked complete all as specified and as directed.
121Supply and fixing LED lights fitting 1x 20 W, 220V,AC decorative box type with driver, holder including LED tube light connecting upto PVC insulated 3 core flexible cable from ceiling rose to fitting drawn through in PVC flexible conduit including as per site requirement and 2 Nos of round or square PVC bolck for fixing of FTL fitting complete all as specified and as directed.
122Supply redundant & fixing modular fan regulator step type , 1 module complete all as specified and as directed.
123M&L for sub main wiring with two runs of 6 Sqmm (2x6 sqmm )1100 volts grade single core FR PVC insulated unsheathed multistranded copper conductorcable confirming to IS-694 drawn through and including non-metalic PVC rigid conduit 25 mm dia ISI marked with all conduit accessories concealed in walls/roofs/floors etc with one run of 6 Sqmm (1x6 sqmm ) single core FR PVC insulated unsheathed copper conductor cable as earth wire complete all as specified and directed. Note:- 2 runs of 6 Sqmm ,one run of 6 Sqmm ( 2x6 sqmm + 1x6 sqmm ) cable and one meter of conduit will be measured as one unit again.
124S&F sheet metal enclosures for distribution board when MCB to be used SPN ( Single pole and neutral ) 4 way, 240 Volts, sheet metal powder coated, IP 42 protection with 200 Amps rated bus bar, double door type complete all as specified and directed.
125S&F MCB SPN,40 Amps, 240 Volts, rupturing capacity 10 KA.\\"C\\" Series complete all as specified and as directed.
126S&F MCB SP, 5 to 32 Amps, 240 Volts, rupturing capacity 10 KA \\"C\\" Series complete all as specified and as directed.
127M&L , earthing complete for machinary / Equipment installed at power house / sub station with galavanised steel earth plate electrode of size 60 cmx 60 cmx 6 mm thick buried directly in ground ( earth pit not less then 2.25 m deep below the normal ground level ) with top edge of the earth plate not less then 1.5m below normal Ground level connected galvanised earth lead wire 4.0mm dia by means of bolts, nuts, washerws and check nuts all shown in electrical plate No.3 of SSR Part- I connected to main board / disribution board complete .Earthing GI lead and GI protection pipe 15 mm dia light grade upto 7.5 m from earth pit connecting to machinary/ equipment, testing point, all as specified and testing on completion all as per directed.
128Note :- (i) The unit rate shall also included for earth work in hard /dense soil , PCC type C-I (1:3:6) chamber , PCC 1:2:4 type B-I cover 50 mm thick reinforced with 8 mm dia TMT bars,150 mm c/c both ways, funnel with watering pipe 20 mm dia medium graded , GI protection pipe light grade 15 mm dia and wire mesh complete in addition to items No. 1(a) to (e) of preamble (notes) under sub heading earthing specified on SI page No. 389 of SSR Part - II.(ii) Earthing lead and GI protection pipe beyond 7.5 mtrs will be measured and paid separatelly if required under appropriate Schedule.
129Note :- (i) Earthing shall be tested as specified in casul 19.137 of SSP PART - I 2009 , to the entire satisfication of Engr-in-Charge. (ii) On teting after complataion of earthing , if the desired earth resistance is not obatined the earthing wiil be re done by the contractor at his on risk and cost to the entire satisfaction of the Engr - in - charge.
130Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with blades and frame including necessary opening in the wall as required according to size of exhaust fan complete all as specified and as directed.
131Supply and fixing electric water heater, storage type steel body with inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.complete all as specified and directed.
132Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed.
133S&f angle holder backlite with 1x10 Watt LED Bulb and making of connection with twin core flexible copper conductor from ceiling rose to fitting complete all as specified and directed.
134S&F in replecement bell Multi music type , 240 Volt , Single Pole ISI marked complete all as specified and as directed.
135Supply and fixing in any length UPVC pipe manufacture as per ASTM-D-1785 as per IS-559, Sch-40 complete with fittings, laid in treanches in required length complete all as specified and directed by Engr-in-charge of following size of 50 mm dia complete all as specified and as directed.
136All as per item no 129 here in before but of 25 mm dia complete all as specified and as directed.
137M & L for cutting the existing GI / PVC pipe 100 mm / 50 mm dia in position for insertion of new Gate valva chamber Tee for branch connection complete all as specified and directed.
138S & F UPVC ball valve with operating handle (stop valve) of size (25 mm dia) both ends threaded complete suitable for fitting with ASTMD-1785, Sch 40 UPVC pipes complete all as specified and as directed.
139Supply and fix XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of cross sectional area 35 sqmm 3.5 core complete all as specified and directed
140Supply and fix XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of cross sectional area 10 sqmm 2 core complete all as specified and directed
141Supply and fix sheet metal enclosure powder painted MCCB DB VTPN 415 Volts 4 way double door vertical type with 200 Amps rated bus bar din rail neutral link with including suitable for MCCB as incomer and concealed in wall complete all as specified and as directed. Make : Havells cat part No-DHDLVDRWAOFO04 or equilant Legtand,Schnider.
142S & F GI pipe, light grade, of size 50 mm dia including necessary fittings laid in trenches/fixed on wall/pole for LT cable protection and taking down the old GI pipe, for cable protection complete all as speicifed and directed.
143Excavation in trenches in soft/loose soil , not.exc 1.5 mtr wide and not.exc 1.5 mtr deep and getting out in soft/loose soil for laying of cable/foundation of pole and stay etc in complete all as speicifed and directed.
144M&L for sand cushioning in trenches for protection of LT under ground cable including watering and consolidation complete all as specified and directed.
145Supplying and laying un-reinforced precast concrete cable cover class LV Type 1, flat, size 250mm x 150mm x 40mm complete all as specified and directed.
146NOTE APPLICABLE FOR ALL ITEMS :- If rate quoted for similar/identical items in same part of Sch ‘A’ is at variance, the lowest rate quoted shall only be considered for payment to the contractor. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58646539
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 37.21 Lakhs
LAST DATE 11-12-2026
Authority
Authority Name military engineer services
Work Description Tender For Providing Of 03 X Jco Single Living Accn At 2 Garh Rif In Mil Stn Bhuj Under Ge (A) Bhuj.
Basic Detail
Tender No 8530
Bidding Type Tender
Location
City Kachchh
State Gujarat
Key Dates
Publish Date 20 Nov 2026
Submission Date 11 Dec 2026
Open Date 14 Dec 2026
Finance
Tender Value 37.21 Lakhs
Tender Fee 500
EMD 74420
Exemption Available
Document List
3a4d51cd-1b1d-4ee4-aa75-ec23d4ce1db0.html
BOQ_897283.xls
LISTOFMAKE.pdf
PS8530.pdf
TENDER8530.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 20, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 11, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 19 days
Dec 14, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 22 days

Tender Documents

Download All (ZIP) ↓
html

3a4d51cd-1b1d-4ee4-aa75-ec23d4ce1db0.html

xls

BOQ_897283.xls

pdf

LISTOFMAKE.pdf

pdf

PS8530.pdf

pdf

TENDER8530.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender