Defence Statutory Bodies & Commissions/Committees Closing in 20 days TDR #58646533

Tender For Providing Of Hard Standing Plinth With Retaining Wall At Smqs At Af Stn Samana Under Ge (Af) Jamnagar No 1

Issued by Statutory Bodies & Commissions/Committees · Jamnagar, Gujarat
Tender Value
29.13 Lakhs
Estimated cost
Bid Submission
12 Dec 2026
20 days left
EMD
58500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Jamnagar → Gujarat
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Providing Of Hard Standing Plinth With Retaining Wall At Smqs At Af Stn Samana Under Ge (Af) Jamnagar No 1

BOQ

Name of Work:- PROVN OF HARD STANDING PLINTH WITH RETAINING WALL AT SMQs AT AF STN SAMANA UNDER GE (AF) JAMNAGAR NO 1
Sl. No. Item Description
1Excavation in trenches not exceeding 1.50 mtr wide and not exceeding 1.50 mtr in depth for foundation etc., or shafts, wells cesspits, manholes, pier holes etc., not exceeding 10 sqm on plan and getting out in Hard/dense soil, complete all as specified and directed by Engineer-in-Charge.
2Excavating over areas in any type of soil, not exceeding 1.5 Metre deep and getting out, complete all as specified and directed by Engineer-in-Charge.
3Surface dressing not exceeding 15 cm deep in Hard/dense soil, complete all as specified and directed by Engineer-in-Charge.
4Excavating in post holes (or similar holes) in Hard/dense soil each not exceeding 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed by Engineer-in-Charge.
5Returning filling in including spreading, levelling, watering and well ramming in layer not exceeding 25cm in layer, complete all as specified and directed by Engineer-in-Charge.
6Removing excavated soil to a distance exceeding 1 Km & n.exc 1.50 km and depositing where directed at a level n.exc 1.50 mtr above the starting point, complete all as specified and directed by Engineer-in-Charge.
7Material & Labour for providing pre-cast cement concrete type C-1 (1:3:6) (using 20mm graded stone aggregate) solid building blocks exe 10 cm thick, in width (with plain or inter locking joints as directed) setting in Cement Mortar 1:6, complete in wall or pillars, complete all as specified and directed by Engineer-in-Charge.
8Material & Labour for rendering 15mm thick on stone masonary / brick / concrete surface of walls in cement mortar 1:4, complete all as specified and directed by Engineer-in-Charge.
9Material & Labour for preperation of new decorated surfaces of wall by brooming down or steel wire brushes scrapping down smoke, Dust, moulds efflorescent salts etc and applying two coat of Cement base paint in camouflage paint, complete all as specified and directed by Engineer-in-Charge.
10Supply & Fixing Low density polyethylene pipes (LDPE) 50mm of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc., complete all as specified and directed by Engineer-in-Charge.
11Material & Labour for Hardcore broken stone or boulders of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface, complete all as specified and directed by Engineer-in-Charge.
12Material & Labour for providing 75mm cement concrete type D-2, 1:4:8 (using 40mm graded aggregate) as in sub base etc., complete all as specified and directed by Engineer-in-Charge.
13Material & Labour for providing precast cement concrete type B-1, 1:2:4 (using 20mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges, coping and the like bands etc including weathering, sightly rounded or chamfered angles and thoating, form work (Straight or curved), complete all as specified and directed by Engineer-in-Charge.
14Material & Labour for 75mm thick Cement concrete type B- 2, 1:2:4 (40mm graded aggregate) as in floor / hard standing/Path, etc., complete all as specified and directed by Engineer-in-Charge.
15Material & Labour for 100mm thick Cement concrete type C- 2, 1:3:6 (40mm graded aggregate) as in plinth protection etc., complete all as specified and directed by Engineer-in-Charge.
16Material & Labour for Forming construction joints 30mm deep x 10mm wide filled with sealing compound Grade B etc., complete all as specified and directed by Engineer-in-Charge.
17Material & Labour for 100mm thick cement concrete type D-2, 1:4:8 (using 40mm graded aggregate) as in sub base etc., complete all as specified and directed by Engineer-in-Charge.
18Material & Labour for cement concrete type D-2, 1:4:8 (using 40mm graded aggregate) as in fdn filling and mass concrete etc., complete all as specified and directed by Engineer-in-Charge.
19Material & Labour for Rubber moulded chequered cement concrete tile with white cement and pigment (of approved tint) of size 30cm x 30cm x 25mm thick over and including 15mm thick screed bed in cement Mortar 1:6, set, jointed and pointed in neat cement slurry, complete all as specified and directed by Engineer-in-Charge.
20Material & Labour for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 Grade with grey cement and pigment including laying over 25mm thick sand cushning, complete all as specified and directed by Engineer-in-Charge.
21Supply & Fixing Rolled mild steel sections as in framing (Beam, tee, angle, channel or flat sections) for cladding, glazing and the like fixed with angle cleats and connecting plates, etc conforming to FE-290 Gde-E-165), complete all as specified and directed by Engineer-in-Charge.
22Supply & Fixing Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240, complete all as specified and directed by Engineer-in-Charge.
23Supply & Fixing Plates (Plain or chequered) channels, squarecut or notched (ordinary and counter sunk) forming holes, w/o any attachment conforming to FE-290 (Gde-E-165), complete all as specified and directed by Engineer-in-Charge.
24Material & Labour for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide, complete all as specified and directed by Engineer-in-Charge.
25Supply & Fixing Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58646533
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 29.13 Lakhs
LAST DATE 12-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender For Providing Of Hard Standing Plinth With Retaining Wall At Smqs At Af Stn Samana Under Ge (Af) Jamnagar No 1
Basic Detail
Tender No 8466/E8
Bidding Type Tender
Location
City Jamnagar
State Gujarat
Key Dates
Publish Date 20 Nov 2026
Submission Date 12 Dec 2026
Open Date 14 Dec 2026
Finance
Tender Value 29.13 Lakhs
Tender Fee 500
EMD 58500
Exemption Available
Document List
3cea3a62-2b23-4a9e-bc9f-e3fca80b7a95.html
BOQ_897295.xls
PS.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 20, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 12, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 20 days
Dec 14, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 22 days

Tender Documents

Download All (ZIP) ↓
html

3cea3a62-2b23-4a9e-bc9f-e3fca80b7a95.html

xls

BOQ_897295.xls

pdf

PS.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender