Defence Statutory Bodies & Commissions/Committees Closing in 12 days TDR #58646513

Tender For Addition/Alteration To Drainage System And Covers/ Lids For Drainages At Various Locations At 5 Afh Under Ge (Af) Jorhat

Issued by Statutory Bodies & Commissions/Committees · Jorhat, Assam
Tender Value
Ref. Documents
Estimated cost
Bid Submission
04 Dec 2026
12 days left
EMD
77660
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Jorhat → Assam
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Addition/Alteration To Drainage System And Covers/ Lids For Drainages At Various Locations At 5 Afh Under Ge (Af) Jorhat

BOQ

Name of Work:- ADDN/ALTN TO DRAINAGE SYSTEM AND COVERS/ LIDS FOR DRAINAGES AT VARIOUS LOCATIONS AT 5 AFH UNDER GE (AF) JORHAT
Sl. No. Item Description
1Demolition of brick work, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and as directed.
2Demolition of cement concrete (unreinforced) in ground floors or pavings not exc. 15cm thickness (below or above ground level) complete all as specified and as directed.
3Demolition of cement concrete of any description and in any position as in roofs, floors (other than ground floors), beams, landings, chajjas and similar suspended work complete all as specified and as directed.
4Taking down cement or cement lime plaster on brick or stone walls, ceilings, etc. including raking out joints, hacking for key scrubbing down with water, etc, complete all as specified and as directed.
5Dismantling of 300mm bore cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified and as directed.
6Excavation in trenches not exc. 1.5m wide and 1.5m in depth for foundation, etc. or for drains, manholes, etc. not exc 10 Sqm on plan and not exc.1.5m in depth and getting out as in soft/loose soil complete all as specified and as directed.
7Material and labour for removing excavated materials (soft/loose soils) not exc. 50m and depositing where directed at a level not exc. 1.50m above the starting point complete all as specified and as directed.
8Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm as in soft/loose soil complete all as specified and as directed.
9Material and labour for hardcore of gauge not exc. 63mm of broken stone boulders, deposited, spread and levelled in layers not exc. 15cm thick, watered and rammed to a true surface complete all as specified and as directed.
10Material and labour for plain cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.
11Material and labour for brick work with sub-class 'B' bricks (old size), one brick thick walls, straight or curved on plan exc. 6m mean radius, built in cement mortar (1:4) complete all as specified and as directed.
12Material and labour for PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in benching, surface channel and copping including necessary formwork complete all as specified and as directed.
13Material and labour for plain cement concrete (1:3:6) type C-1 (using 20mm graded stone aggregate) as in plinth protection complete all as specified and as directed.
14Material and labour for Forming Construction joint 30mm deep x 10mm wide filled with sealing compound of grade 'A' complete all as specified and as directed.
15Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces, finished even and smooth with using extra cement complete all as specified and as directed.
16Material and labour for precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in cover slab of drain/manhole/septic tank, etc., set in cement mortar (1:6) including necessary formwork complete all as specified and as directed.
17Supply and fix for mild steel TMT bar of size 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends, binding with and including mild steel wire (annealed) not less then 0.9mm dia or securing with clips quality conforming complete all as specified and as directed.
18Material and labour for 300mm bore reinforced concrete pipes, class NP2, laid in trenches and jointed collars complete all as specified and as directed.
19Material and labour for cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) as in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in trenches for 300mm bore of pipe complete all as specified and as directed.
20Dismantling wrought iron or mild steel work of any description not otherwise specifically provided for complete all as specified and as directed.
21Supply and fix for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290, Gde-E-165 complete all as specified and as directed.
22Material and labour for preparation of new steel surfaces of any description over 10cm girth or width and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and as directed.
23M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed.
24Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and as directed.NOTE:- The contract sum shall be derived by deducting the amount shown in Schedule of Credit attached to this tender from total amount of Schedule 'A'/BOQ. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58646513
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE Ref. Documents
LAST DATE 04-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender For Addition/Alteration To Drainage System And Covers/ Lids For Drainages At Various Locations At 5 Afh Under Ge (Af) Jorhat
Basic Detail
Tender No 8829/E8
Bidding Type Tender
Location
City Jorhat
State Assam
Key Dates
Publish Date 20 Nov 2026
Submission Date 04 Dec 2026
Open Date 05 Dec 2026
Finance
Tender Value Ref. Documents
Tender Fee 500
EMD 77660
Exemption Available
Document List
8829tender.pdf
BOQ_897231.xls
fac72d02-76bb-4305-88f9-40b69e735a35.html
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 20, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 04, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 12 days
Dec 05, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 13 days

Tender Documents

Download All (ZIP) ↓
pdf

8829tender.pdf

xls

BOQ_897231.xls

html

fac72d02-76bb-4305-88f9-40b69e735a35.html

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender