Tender For Providing Of Certain Sanction Works In The Area Of Age B/R-I And Age E/M Under Ge (Central) Delhi Cantt-10
Tender Value
48.66 Lakhs
Estimated cost
Bid Submission
11 Dec 2026
20 days left
EMD
97320
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Providing Of Certain Sanction Works In The Area Of Age B/R-I And Age E/M Under Ge (Central) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (un-reinforced) in any floor n.exc 15cm thickness ( below or above ground level ) not otherwise specially provided including removal of rubbish out side complex (MOD land), complete all as specified. |
| 2 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) by using diamond saw blade cutting machine without damaging adjacent RCC structures not otherwise including removal of rubbish outside complex ( MOD land), complete all as specified. |
| 3 | M & L for 75 mm thick cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in floor finish, surface even and smooth without using extra cement, complete all as specified. |
| 4 | M&L for 75 mm thick cement concrete 1:3:6 type C2 (using 20mm graded stone aggregate). Plinth protection laid to a slope of 1 in 24 in alternate basis system.Surfaces even and smooth without using extra cement Each bay shall not exceed 3m in length, 12mm wide & 75mm deep joint shall be formed between the bays which shall be filled with Mastic filling to full depth comprising a mixture of 1 part of heator hot blow bitumen 85/25 portion and two parts of heated badrapur sand (by volume) complete all as specified and directed. |
| 5 | M&L RCC(NOMINAL MIX) M-20 (Type B1 1:2:4 Using 20mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies,canopies, deck slabs and in shelves and the like.(as per drawing attached) |
| 6 | Supply and fix TMT bars, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) but not less than 0.9 mm dia conforming to Fe-410 - 0, complete all as specified. |
| 7 | Demolition of brick work built in cement mortar in any description and position, complete all as specified. |
| 8 | M&L for brick work with sub class 'B' brick straight or curved on plan exc 6 metre mean radius with old size bricks, built in cement mortar 1:6, complete all as specified. |
| 9 | All as per item no 8 here in before but except bricks |
| 10 | M&L for cement concrete 1:2:4 type B1(using 20mm graded stone aggregate) as in blocks for hold fast, coping, benching etc. including weathering, slightly rounded or chamfered angles or throating including form work to concrete surfaces, complete all as specified upto six storey height. |
| 11 | Taking down cement plaster of any description and in any position of brick or stone wall/concrete surfaces on walls ,ceiling etc including raking out joints ,hacking for key scrubbing down with water etc & prepared to receive new plaster complete all as specified and directed. |
| 12 | M&L for 15 mm thick rendering in cement mortar on fair faces of brick work or concrete surfaces , applied in two layers ie. Ist layer of 10 mm thick rendering in cement mortar (1:6 ) and 2nd ( top ) layer of 5 mm thick rendering in cement mortar (1:4 ) mixed with WPC finished even and fair etc complete all as specified and directed.(Note:- WPC shall be measured and paid seperately.) |
| 13 | M&L rendering 10 mm thick in CM 1:6 on internal brick/concrete wall surfaces of any description, and finishing the surfaces even and fair without using extra cement complete all as specified and directed . |
| 14 | Supply only waterproofing admixture of Dr Fixit Plaster Master or equivalent with 200ml per 50 kg of cement or as per the description as specified by the manufacturer |
| 15 | M&L for rendering 5 mm thick in Cement Mortar (1:3) on ceiling finished even and fair without using extra cement complete all as specified and directed. |
| 16 | M&L for Preparation of old decorated surfaces(Plastered or unplastered) of wall including cornices, pillasters etc by complete removal of existing treatment and applying two coats of white lime washing, complete all as specified. |
| 17 | M&L for preparation of the newly plastered surfaces of walls applying wall care putty of 1 mm thickness over plastered surface to prepare the surface even and smooth to receive primer and applying one coat primer & two or more coats Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. |
| 18 | S&F Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers( wood powder/ rice husk/ wheat husk) and nontoxic additives ( max toxicityindex of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr-in- charge. Note: -For WPC solid door/windows frames, minus 5mm tolerance in dimension i.e., depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made. Note:- Contractor will provide manufacturer test certificate alognwith screw out test certificate. |
| 19 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-in-Charge.(Note: stainless steel butt hinges shall be paid separately under relevant item).Note:- Contractor will provide manufacturer test certificate alongwith screw out test certificate. |
| 20 | Providing 30mm thick FACTORY-MADE WIRE MESH SOLID WPC DOOR SHUTTER consisting of Density 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company, Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (Confirming as per IS:4020). The door should be water proof, termite proof,fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. SS butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through Other hardwares shouldbe fixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in-charge, manufacturer's specification & drawings.” Note: Fixture/fittings shall be measured & paid under relevant item |
| 21 | Taking down chowkats or frames n.exc 1.5 sqm each with shutters (without taking off shutters from frames), complete all as specified. |
| 22 | Taking down chowkats or frames exc. 1.5 Sqm and n.exc 4 Sqm each with shutters (without taking off shutters from frames ), complete all as specified. |
| 23 | Taking down chowkats or frames exc. 4 Sqm and n.exc 6 Sqm each with shutters (without taking off shutters from frames ), complete all as specified. |
| 24 | S&F Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/chowkhat of size 50x 100 mm comprising of virgin PVC polymer of K value 50-60 (Suspension Grade), calcium carbonate and natural fibers( wood powder/ rice husk/ wheat husk) and non toxic additives ( max toxicityindex of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr-in-charge.Note: For WPC solid door/windows frames,minus 5mm tolerance in dimension i.e depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made.Note:- Contractor will provide manufacturer test certificate alognwith screw out test certificate. |
| 25 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-in-Charge. (Note: stainless steel butt hinges shall be paid separately under relevant item).Note:- Contractor will provide manufacturer test certificate alognwith screw out test certificate. |
| 26 | S&F Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkat of size 65x 125 mm comprising of virgin PVC polymer of K value 50-60 (Suspension Grade), calcium carbonate and natural fibers( wood powder/ rice husk/ wheat husk) and non toxic additives ( max toxicityindex of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr in charge.Note: For WPC solid door/windows frames,minus 5mm tolerance in dimension i.e depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made. |
| 27 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type Skelton door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-in-Charge. (Note: stainless steel butt hinges shall be paid separately under relevant item).Note:- Contractor will provide manufacturer test certificate alognwith screw out test certificate. |
| 28 | S&F 100 mm long (size) butt hinges, medium weight, stainless steel, complete all as specified. |
| 29 | S&F 75 mm long L Bihari concealed type hinges incl stainless screw complete all as specified.Make :-Hettich,Godrej,Ozone,Kich |
| 30 | S&F 300mm long, stainless steel of AISI 304 grade, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and fixed, complete all as specified and directed. |
| 31 | S&F 150mm long stainless steel barrel tower bolt of extruded section, complete all as specified. |
| 32 | S&F 200mm long stainless steel barrel tower bolt of extruded section, complete all as specified. |
| 33 | S&F 150mm size stainless steel AISI 304 grade fancy type handle complete all as specified and directed. |
| 34 | S&F stainless steel AISI 304 grade floor door stopper with hard drawn steel spring 140mm long complete all as specified and directed. |
| 35 | S&F stainless steel Hasp and staple, 100mm size, safety type, brass with stainless steel hinge pin including bolt to hinge plate & fixed with screws, complete all as specified. |
| 36 | S&F continuous (Piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps (when open) 30 mm, complete all as specified. |
| 37 | S&F mild steel 150mm ordinary rat tail , rod pattern springs including roller and roller plate complete all as specified |
| 38 | S&F Stainless steel drapery curtain rods gold or antique silver 25 mm nominal dia and minimum thickness 1.2mm of SS-304 Grade of approved quality with two number decorative brackets design as approved fixed in brick/concrete wall with same finished knobs/latto on each end of curtain rod incl taking down old pelmet complete all as required and directed. |
| 39 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar, all as specified. |
| 40 | M&L for coloured ceramic tiles of size 7-8 mm Thick area of each tile exceeding 0.18 sqm and not exceeding 0.38 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement over 15mm thick screed bed in CM 1:6 complete all as directed. Note : Vitrified tiles can be used in lieu of ceramic tiles at no cost basis. |
| 41 | S & F for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 all as specified and as directed. |
| 42 | All as per item No 42 above but as skirting over and including 10mm thick rendering in CM 1:4. |
| 43 | M&L for Glazed ceramic tiles in vertical surface 600x 300x 7-8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar (1:4) complete all as specified and as directed. |
| 44 | M&L for Vitrified Ceramic tiles light shade 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm of size (600mm X 1200mm), in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchcomplete including 10mm thick rendering in cement mortar (1:6) complete all as specified and as directed. |
| 45 | All as per item No 44 above but as skirting over and including 10mm thick rendering in CM 1:4. |
| 46 | M&L for 16-18mm thick granite ‘Jade black’ table rubbed and polished in Step, Jambs, Pillar, Window Cill, Cooking Platform (insingle piece).In cooking platform additional 75mm width of same granite patti stick with araldite or equivalent adhesive full moulding of edges to match the Coln our of granite, fixed with 15mm thick cement mortar in 1:4 complete all as specified and directedNote :- (a) Additional 75mm width patti shall be measured separately.(b) Minimum market rate of granite should not be less than150 Sqft including GST” |
| 47 | M&L for 12-15 mm thick Full body vitrified tiles of size n exc 0.24 sqm in single piece of approved shade including 15 mm thick in cement mortar 1:4 and joints shall be filled by using tile grout or equivalent of pigment to match with the shade of tile as in treads/risers of steps in one piece including jointing or step grooving if required and full molding complete all as specified and directed.Note: Step grooving should be factory made and factory molded |
| 48 | Taking up or down 15 mm dia GI tubing and connections complete all as specified. |
| 49 | Taking up or down 20 mm dia GI tubing and connections complete all as specified. |
| 50 | Supplying and laying of CPVC 20mm OD pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified complete with fitting as required. |
| 51 | Supplying and laying of CPVC 25 mm OD pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified complete with fitting as required. |
| 52 | S&F in pair of soft closing ball bearing telescopic channel of size 22 inch long fixed with screws in cupboards incl all fittings complete all as spd and directed by Engr in charge.Note : Runner/ Channel should be SS 304 grade and load capacity should not be less than 45 kgs |
| 53 | S & F 50 mm dia Galvanised Iron steel tubing, medium grade as in spout in short length, complete all as specified. |
| 54 | Dismantling of cast iron pipe of any dia (soil/waste/vent) with fittings etc fixed to walls,ceiling, on floors & from trenches if required including taking out any type of joints complete all as specified. |
| 55 | S & F 75 mm dia (bore of pipe) cast iron (sand cast) soil, waste, vent pipe in any length with or without ears with cement joint fixed to walls, complete all as specified. |
| 56 | S&F sinks made of stainless steel 1mm thick kitchen with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm all as specified and directed. |
| 57 | S & F in repair Brass CP health faucet hand shower type with 8mm dia 1.2 Meter long Flexible Tube and Wall Hook screwed for iron pipe fancy type long body all as specified and directed. Make-Jaquar Cat No : ALD 573, Cera Cat No : F8030107AB, Hindware : F160023 & Kohler Cat No K-98100IN-CP |
| 58 | Supply & fix in repair PVC connection pipe of 15mm x 600mm long with 2 Nos brass check nuts with washers, complete all as specified. |
| 59 | S&F in repair vitreous china squatting pan of orissa pattern long pan size 580 x 440 mm white with \\"p\\"or \\"S\\" trap front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe) including provn of lime concrete bedding complete all as specified. |
| 60 | S & F 10 ltrs PVC valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, fixing with gitties embeded in wall with drilling machine etc complete all as specified. Makes : Jaquar : WHT-184 ANL, Hindware : 516366, Cera : B1020106. |
| 61 | S&F fancy type brass chromium plated toilet paper holder, complete all as specified.Make: : Cera Cat No: F5004110, Jaquar Cat No CPA-CHR-1153, Hindware Cat No. F-880003CP, Kohler Cat No K-5633IN-CP |
| 62 | S&F in repair fancy type brass chromium plated soap dish, complete all as specified.Make:Jaquar Cat No: ACN-CHR-1131N, Cera Cat No: F5007106, Hindware : 880011GRT |
| 63 | S&F in repair SS Cockroach Trap with jali 125mm dia, complete all as specified. |
| 64 | S&F in repair fancy type 15mm dia brass chromium plated quarter turn basin mixer with braided hose for mixing hot and cold water screwed down for iron pipe and fixed to WHB complete all as specified.Make:-Jaquar Cat No: FLR-CHR-5167NB, Cera Cat No: F-2008461, Hindware : F570014 & Kohler Cat No K-29928IN-4ND-CP |
| 65 | S&F in repair 15mm dia chromium plated quarter turn wall mixer hot & cold L bend 3 in 1 pattern fixing and connection to pipes, complete all as specified and directed. Make Jaquar FLR5281N, CERA F2008401, Hindware F570022. |
| 66 | S&F in repair fancy type 900mmx600mm bevelled edge mirror of selected quality glass mounted on 4mm thick PVC sheet and rectangular shape and fixed to wooden plugs with chromium plated brass screw and cupwashers, all as specified. |
| 67 | S&F in repair fancy type chromium plated quarter turn brass angle valve concealed type type suitable for 15mm bore pipe complete all as specified Make: Jaquar FLR 15053PM, CERA F1001201, Hindware F570043” |
| 68 | S & F in repair Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union all as specified.Make:-Cera Cat No F-7010609AB & F-7040207, Jaquar Cat No OHS-CHR-1663 & SHA-CHR-479L600, Hindware Cat No F-160219CP & F-160024CP, Kohler Cat No K-23657IN-CP & K-16346-IN-CP |
| 69 | S&Fin repair CP tublor towel rail 20mm dia ISI marked 60cm long between flanges incl a pair of CP brasss bracketscomplete all as specifed |
| 70 | S&F stainless steel of AE - SI 316 grade tubular towel ring including apair of CP brass bracket complete all as specified . |
| 71 | S&F in repairs bib tap with crutch or butterfly handle, quarter turn screwed down, screwed for iron pipe, 15mm dia, fancy type, cast copper alloy, chromium plated long body with flange complete all as specified Make: Jaquar Cat No: FLRCHR-5047N, Cera Cat No : F-2008152, Hindware : F460003 & Kohler Cat No K-16093IN-4-CP |
| 72 | S&F in repair stainless steel sink with drainage board made out of 1.00mm thick sheet for kitchen with plug, washers, waste pipe including connecting union overall size 910 mm x 460 mm with bowl size 410mm x 330mm x 160 mm including taking out existing sink with waste fittings complete all as specified.Makes :Cera Cat No :B4711507SF,Nirali Ng item : MONTY NG(MAGNUS ELITE RANGE (size Big)), Diamond cat part : SKU U2022 or equivalent. |
| 73 | S&F in repair 1000 ltr capacity rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position with 20mm Ball brass valves,high pressure,with polythene float and flynut complete, screwed for iron pipe or brass ferrule Minimum wt 20mm-210grm and s&f in repair 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed incl Dismantling of PVC water tanks of exc 500 litres and n.exc 1000 litres capacity of any condition or type incl complete all as specified and directed. |
| 74 | S&F in repairs of 25mm dia CPVC OD gate valves SDR 11, screwed both ends for CPVC pipes and fixed complete all as specified and directed. |
| 75 | Dismantling of brick tiles or terracing tiles single layer on roof and removing the rubbish outside complex (MOD land),incl removal of vagitation if any complete all as specified. |
| 76 | Demolition of mud in roof, any thickness, including mud plastering and mud phuska under brick tiles at any situation and height, complete all as specified. |
| 77 | Roughening surfaces of old concretefloor by picking, sweeping clean andwashing down with water to removedust, etc |
| 78 | M &L for Brushing neat cement slurry with 3 Kg of cement per square metre complete all as specified and directed . |
| 79 | M&L for cement concrete 1:2:4 type B1 (using 12.5mm graded stone aggregate) on roof padding surface finished even and smooth without using extra cement complete all as spd & directed. |
| 80 | M&L for rendering 10mm thick on top of roof concrete in cement mortar 1:4 with water proofing compound at the rate of 3% by weight of cement to have a smooth surface for laying of water proofing membrane. Note: Water proofing compound will be measured and paid seprately. |
| 81 | M&L for APP based polymeric membrane plain finish minimum weighting 3 kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt not less than 150 gms/sqm) over one coat of 85/25 bitumen @1.2 kg/sqm and paste the membrane with torching method and again apply a coat of 85/25 bitumen @ 1.2 kg/sqm at overlapping joints |
| 82 | S & F for Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface up to 3 cuts complete, including providing skirting up to 150 mm height along the parapet walls in the same manner incl screed bed or bedding layer of mortar 15 mm thick 1:6 for laying floor finishes. |
| 83 | M & L Cement concrete 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in roof kerbs or mud stops etc including weathering slightly rounded or chamfered edges, finished even and smooth without using extra cement complete all as specified. |
| 84 | M&L for Providing & injecting chemical for post construction ATT along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc in a portion with cement mortar 1:2 to match the existing apron complete all as specified and directed. |
| 85 | M & L for Post Construction anti termiteTreatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same. |
| 86 | M & L for Post Construction anti termiteTreatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor sall as specified and directed. |
| 87 | Dismantling wrought iron or mild steel work of any description not otherwise provided for parapet railing, balconies, metre rooms shaft area any description complete as specified and directed upto six storey height.. |
| 88 | S&F stainless steel grill(Grade-304) using 10mm thick square bars (100mm C/C) of weight not less than 0.62 kg/Rm including necessary frame and accessories for window and ventilator grill complete all as specified and directed. |
| 89 | S&F Mild steel rolled section as in main and cross beam, hip and jack rafter, purlins, where connected to common rafter and running rails fixed with cleat or other connecting plates etc.(Fe-410-W(Gde E-250)Quality-A) |
| 90 | M&L for Preparation of new steel and iron surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of redoxide primer, complete all as specified. |
| 91 | M&L for Preparation of old painted surfaces of steel and iron surfaces of any description over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint, complete all as specified. |
| 92 | S&F of 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed complete to walls, ceilings or in floors with suitable clamps/bracket including taking down old PVC/CI pipes and necessary cutting through RCC roof and brick work etc (above six storey height) and making good all as specified. |
| 93 | S&F of 110 mm dia PVC (SWR) bends any radius with solvent joints, complete all as specified. |
| 94 | S&F in repairs PVC (SWR) pipes double socket in any length with rubber ring joints, fixed to walls 75mm dia ,in four storey building complete all as specified Make prince |
| 95 | S&F in repairs PVC (SWR) bends of any radius ( 110mm bore) including jointing with solvent cement complete all as specified Make prince |
| 96 | S&F in repairs PVC (SWR) junction double,(double T, 110 mm bore), equal or unequal , including jointing with solvent cement complete |
| 97 | S&F in repairs PVC (SWR) junction double,(double T , 75 mm bore ), equal or unequal complete, including jointing with solvent cement. |
| 98 | S&F in repairs PVC (SWR) bends of any radius ( 75mm bore) including jointing with solvent cement complete all as specified Make prince |
| 99 | S&F in repair pvc floor trap square type with Cockroch Proofing CP grating with or without hole including provision of jointing to waste pipes in run lead joint dia of outlet 75 mm, complete all as specified. Please Enable Macros to View BoQ information |
| 100 | S&F in repair pvc floor trap square type with Cockroch Proofing CP grating with or without hole including provision of jointing to waste pipes in run lead joint dia of outlet 75 mm, complete all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysDec 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender