Tender For Service Assistance And Other Miscellaneous Mechanical Maintenance Works At Nrpl, Panipat
Tender Value
66.90 Lakhs
Estimated cost
Bid Submission
04 Dec 2026
13 days left
EMD
17000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Panipat → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Service Assistance And Other Miscellaneous Mechanical Maintenance Works At Nrpl, Panipat
BOQ
| Sl. No. | Item Description |
| 1 | Schedule-I: Variable part |
| 2 | Supply and Erection of Structural Steel: Supplying at site, steel structural items such as steel plates, bars, MS gratings, chequered plates, angles, beams channels, commercial quality heavy pipes, C.I. Rollers, bolts & nuts, washers, grouting bolts, padding plates etc., fabrication and erection of saddle supports and other type of supports for pipes manifolds and valves, fabrication and erection of platforms walkways, crossovers, stairways etc., sand blast/power brush cleaning, priming and painting the finished structures including supply of all other inputs such as labour, materials, consumable etc. necessary to perform and complete the work in all respect, in accordance with drawings, specifications and instructions of the Site Engineer / EIC. |
| 3 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. [Notes: (1) Dismantling shall be allowed during day shift only & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be done prior to dismantling operations. (3) Cutting of steel shall be done using hack saw or chisel or any other method as approved by the Engineer-in-Charge.] |
| 4 | Dismantling of Above-ground piping and equipments: Dismantling of existing over ground piping works including manifolds of all types and sizes by opening flange joints or by gas cutting/ cold cutting or any other approved suitable means without damaging other portions of work. The job includes cutting the pipes to required sizes as directed, taking out valves, flanges, tees, bends, gaskets nuts, bolts etc. attached supports along with any instruments such as pressure gauge, temperature gauge etc. handling, transporting and storing at owner's designated store in safe manner to avoid damage including supply of all labour, materials, equipments, consumables etc. necessary to perform and complete the work in all respects as per drawings, instructions of the Site Engineer / EIC (payment shall be made on linear measurement of dismantled piping including bends tees etc.). Note: The contractor shall indicate the piping system to be dismantled and shall take specific approval from the Site engineer before dismantling of pipe. Certain redundant pipes which in the opinion of the Owner need not be retrieved, those items shall not be dismantled |
| 5 | Letter writing-Lettering with black Japan paint of approved brand and manufacture. [Note: Unit \\"EA\\" shall mean \\"PER LETTER PER CM HEIGHT\\"]. |
| 6 | STEEL SCAFFLODING (MATERIALS IN CONTRACTOR'S SCOPE): The job includes supply of all scaffolding materials, transportation to work site, erection of scaffolding at site covering the areas specified as per ISMS-1007 safety standards and dismantling scaffolding after completion of job and taking away the scaffolding material including supply of all tools, tackles, consumables, labours and contractor's supervision as directed by the Engineer-in-Charge Note: 1. For measurement in SQM: 2 (length + width) X height area covered by the scaffolding is to be taken. 2. Scaffolding measurement to be done by breaking the height into parts as per height slab mentioned below and adopting respective rates against mentioned height slabs. |
| 7 | Up to 6m height |
| 8 | Piping Modification: Carrying out modification in already fabricated and/ or erected pipe due to change in drawing or as required by site condition, taking delivery of pipe, pipe fittings, steel flanges, spiral wound metallic gaskets & fasteners from designated location within station premises, transporting the same to site, cutting of pipe and / or weld joint , edge preparation, bending, lining up, welding and installing pipes and pipe fittings, flanges, elbows, equal and reducing outlet tees, concentric/eccentric reducers, y-type strainers, drain funnels, vent pipes and tapping for instruments such as pressure gauges, thermal relief valves, thermowells etc., installing above ground at all elevations connecting with equipment nozzles, valves, vessels, in line instruments etc., welded and threaded pipe line of different pressure ratings, flushing pipes by water after cleaning by compressed air, hydrostatic testing of each section to the specified pressure, draining the water, tie-in, final cleaning-up and disposal of wastes and surpluses including providing all inputs such as labour, material, equipments and consumables necessary to perform the work (other than those specifically under taken by the owner in this contract) and completing the work in all respects in accordance with the drawings, specifications and instructions of Site Engineer / EIC. (Item is to be operated upon approval of Site Engineer; Item covers only modification / rework jobs.) Note: ID unit indicates Inch-diameter of the respective pipe. As a reference, for 1 joint of 2\\" NB pipe, quantity to be paid to the vendor shall be 2 ID and for 2 nos of joint of 2\\"NB pipe, quantity to be paid to the vendor shall be 4 ID |
| 9 | Pipe size up to 2 inch NB |
| 10 | Pipe size 3 inch NB to 6 Inch NB |
| 11 | Pipe size 8 inch NB and above |
| 12 | RADIOGRAPHY OF PIPING WORKS-Performance of radiographic inspection on all type and sizing of piping/ pipe fittings in position at all heights inclusive of providing sources, film, chemicals, and all necessary equipment, consumables etc. complete in all respect as per specification and instruction of the Engineer-in-Charge |
| 13 | For pipes (per inch dia) |
| 14 | Strainer wire mesh replacement including dismantling, wire mesh replacement, assembly, welding, machining works including all material and labour cost as per direction of EIC. Note- Unit FT2 indicates square feet |
| 15 | Strainer wire mesh size of 10 |
| 16 | Strainer wire mesh size of 20 |
| 17 | Strainer wire mesh size of 40 |
| 18 | Refilling of Nitrogen cylinders including taking delivery of empty Nitrogen cylinders from site, cleaning, refilling, testing and delivery back to site including all labour and material cost complete as per the directions of Engineer-in-Charge/Site-Engineer |
| 19 | Calibration of measuring instruments |
| 20 | Calibration and Certification of Dial Gauge Indicator |
| 21 | Calibration and Certification of Vernier (0-300mm), with analogy dial gauge |
| 22 | Calibration and Certification of Vernier (0-300mm), with Digital dial gauge |
| 23 | Calibration and Certification of Outside Micrometre (25-50mm) |
| 24 | Calibration and Certification of Outside Micrometre (50-75mm) |
| 25 | Outside Micrometer (75-100mm) |
| 26 | Calibration and Certification of Depth Gauge (0-150mm) |
| 27 | Calibration and Certification of Depth Gauge (0-300mm) |
| 28 | Calibration and Certification of Thickness meter (digital) |
| 29 | Calibration and Certification of Bore Gauge (50-150mm) |
| 30 | Performing statutory testing of lifting equipments and pressure vessels as per factories act |
| 31 | Ultrasonic Thickness Testing of Compressed Air Receiver Vertical - Shell dia-1000mm Capacity-1.5 M3 (Half Yearly) |
| 32 | Ultrasonic Thickness Testing of Compressed Air Receiver Vertical - Shell dia-320mm Capacity-0.05 M3 (Half Yearly) |
| 33 | Ultrasonic Thickness Testing of Pressure Vessels of Hydro Testing Pump -Shell dia-260mm Capacity-0.3 M3 (Half Yearly) |
| 34 | Ultrasonic Thickness Testing of Pressure Vessels of DPPL Deluge Valve Air Vessel -Shell dia-260mm Capacity-0.3 M3 (Half Yearly) |
| 35 | Ultrasonic Thickness Testing of Pressure Vessels of SRT bladder Tank -Shell dia-260mm Capacity-0.02 M3 (Half Yearly) |
| 36 | Hydrotesting of pressure vessels |
| 37 | Testing & Certification of Chain Pulley Block Capacity-1 tonne |
| 38 | Testing & Certification of Chain Pulley Block Capacity-1.5 tonne |
| 39 | Testing & Certification of Chain Pulley Block Capacity-3 tonne |
| 40 | Testing & Certification of Chain Pulley Block Capacity-5 tonne |
| 41 | Testing & Certification of Chain Pulley Block Capacity-7.5 tonne |
| 42 | Testing & Certification of Chain Pulley Block Capacity-8 tonne |
| 43 | Testing & Certification of Chain Pulley Block Capacity-10 tonne |
| 44 | Testing & Certification of HOT Crane Capacity -7.5 Tonne |
| 45 | Testing & Certification of HOT Crane Capacity -5 Tonne |
| 46 | Testing & Certification of HOT Crane Capacity -3 Tonne |
| 47 | Testing & Certification of Jib Crane Capacity-5Tonne |
| 48 | Contractor's Service charges on Service Assistance for Mechanical Maintenance Work |
| 49 | Contractor's Service charges on Unskilled Labour provided as per requirement |
| 50 | Supply of Consumables for day to day mai |
| 51 | Mill cloth Rag Cleaning (White Kadha) - |
| 52 | PTFE Rolls (Tefflon tape 10 Pieces Roll) |
| 53 | Anabond 666 Rtv Silicone Sealent-100gm |
| 54 | Loctite Thread locker 243-50ml |
| 55 | HACK SAW BLADES HSS 12mm |
| 56 | EMERY PAPER 80 NO (COARSE)-4 inch |
| 57 | EMERY PAPER 220 NO (FINE)-4 inch |
| 58 | Neoprene rubber sheets 3mm (3mm thick x |
| 59 | 0.5 mm THK. CHAMPION MAKE GASKET(1m x 1m |
| 60 | 1 mm THK. CHAMPION MAKE GASKET(1m x 1m)- |
| 61 | 2 mm THK. CHAMPION MAKE GASKET(1m x 1m)- |
| 62 | 3 mm THK. CHAMPION MAKE GASKET(1m x 1m)- |
| 63 | VITON O-RING CHORD- 2mm dia |
| 64 | VITON O-RING CHORD- 4mm dia |
| 65 | VITON O-RING CHORD- 5mm dia |
| 66 | VITON O-RING CHORD- 6 mm dia |
| 67 | VITON O-RING CHORD- 7 mm dia |
| 68 | for pipes (per inch dia) |
| 69 | WD 40-420ml |
| 70 | Belezona 1111 (1kg) |
| 71 | SS Shim plate packing (1m x 1m)-0.1mm |
| 72 | SS Shim plate packing (1m x 1m)-0.2mm |
| 73 | SS Shim plate packing (1m x 1m)-0.3mm |
| 74 | SS Shim plate packing (1m x 1m)-0.4mm |
| 75 | SS Shim plate packing (1m x 1m)-0.5mm |
| 76 | Paint remover- 1 litre |
| 77 | M-seal-1kg |
| 78 | Schedule-II: Fixed Part |
| 79 | Service Assistance for Mechanical Maintenance Work |
| 80 | Extra hour Charges for Service Assistance for Mechanical Maintenance Work |
| 81 | Wage enhancement charges for Service Assistance for Mechanical Maintenance Work |
| 82 | Lump Sum reimbursement against the providing required PPEs Un-Skilled Labours and production of bill of respective PPEs. |
| 83 | Providing un-skilled labours as per requirement |
| 84 | Lump Sum Wage enhancement for Un-skilled Labour provided as per requirement Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysDec 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender