Tender For Provision Of Temporary Living Accn Alongwith Toilet And Bathroom Blocks (Pre Fabricated Living Accommodation) At Bhalu-Ii Post In Hill Sect Of 15 Repair Renovation (14 Gr) At Bb Cantt, Srinagar.
Tender Value
25.02 Lakhs
Estimated cost
Bid Submission
11 Dec 2026
19 days left
EMD
50040
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
srinagar → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Provision Of Temporary Living Accn Alongwith Toilet And Bathroom Blocks (Pre Fabricated Living Accommodation) At Bhalu-Ii Post In Hill Sect Of 15 Repair Renovation (14 Gr) At Bb Cantt, Srinagar.
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out soft soil, complete all as specified and directed. |
| 2 | Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, for laying of cable/pipe etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil, complete all as specified and directed. |
| 3 | M & L for Plain Cement concrete 1:4:8 type D-2 (using 40 MM graded crushed stone aggregate) in foundation, filling and masss concreate, complete all as specified and directed. |
| 4 | Formwork to sides of pillars, posts, struts, piers, plinth beam columns and stanchions in rough Sqr finished surface of concreate at square, complete all as specified and directed. |
| 5 | M&L for plainn cement concrete 1:2:4 (Type B-2) using 40 mm graded crushed stone aggregate for foundation, including rafts, footings, foundation beams, plinth beams, bases for columns ect, basement slabs under reamed piles and mass concrete, complete all as specified and directed. |
| 6 | M & L for brick work with sub class 'B' bricks straight or curved on plan to any radius built in CM 1 : 6 in brick walls, foundation wall etc., complete all as specified and directed. |
| 7 | M&L for rendering 15 mm thick in cement and sand mortar 1:4 on other than fair faces of brick work or cement concreate surfaces including finishing the surface even and smooth without using extra cement, complete all as specified and directed. |
| 8 | M & L. for preparation of new plastered surface of walls and applying two coats of cement base paint, complete all as specified and directed. |
| 9 | M & L for hardcore of gauge not exceeding 63 mm deposited spread and levelled in layers not exceeding 15 cm thick watered and rammed to true surface, complete all as specified and directed. |
| 10 | M & L for plain cement concrete type B-1, 1:2:4 (using 20 mm graded crushed stone aggregate, 25 mm thick as in floors finished the surface even and fair without using extra cement, complete all as specified and directed. |
| 11 | M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, anti skid, area of each tiles not exceeding 0.36 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15 mm thick screed bed or bedding layer in cement mortor 1:4, complete all as specified and directed. |
| 12 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles laid over and including 15 mm thick screed bed or bedding layer in cement mortor 1:4, complete all as specified and directed. |
| 13 | Returning filling in incl spreading leveling, watering and well ramming in layers not exc 25 cm, complete all as specified and directed. |
| 14 | Removing of excavated soil not exceeding 50 M and depositing where directed at a level not exc 1.5 M above the starting point, complete all as specified and directed. |
| 15 | S & F 50 mm thick wall panel made of 0.5 mm thick not dipped galvanized steel sheet on both side with 50 mm thick, layer of rigid etc free closed cell polyurethane foam with tongue and groove joint including cam lock system for interlocking fixed on base channel 30x36x1.25 mm thick density of form shall be 40 kg/cum (+- kg/cum) the panel shall be precoated as approved by GE, complete all as specified and directed. |
| 16 | S&F 40 mm thick puff insulated panel made of 0.5 mm thick on both side with 40 mm thick rigid polyurethane with tongue and groove joint interlocking for ceiling to be fixed with and both including inverted CRCA Tee secion 50x50x5 mm thick and L section of 50x50x5 mm thick to roof trusses incliding handing aggargments, complete all as specified and directed |
| 17 | S&F sliding type three track alluminium window provided with top and side member 92x317x1.5 mm thick (1.06 kg/Rmminimum weight) bottom three track rail shall be 90x31.75x1.5 mm (1.248 kg/RM) shuttter shall of 40x31.75x1.5 mm section (0.547 kg/RM weight) shutter shall be provided with handle and self locking arrangement intericking style shall of 40x18x1045 mm(0.607 kg/RM) pannel shall be of 6 mm thick clrae grade 6/2 Rs. 1.3 mm polycarbonate shall the wince shall be fixed to wall panel as per standrad practice two shutter shall glazed and one shutter shall be wire gauged of aperture 1.40 mm, complete all as specified and directed. |
| 18 | S&F anodised aluminium powder coated (minimum 50 micron thickness) door shutter with frame, glazed with 10mm thick venered decorative plyboard including rubber bead, joining cleat for fixing, aluminium door handle 150mm size and tower bolt 200mm size 2 Nos of each door, mortice lock vertical type of mild steel 4 levers of size 100mm etc as mentioned here in below, complete all as specified and directed. |
| 19 | S&F aluminium window/ventilator openable/ fix type with aluminium anodized frame of section 62.30 x 44.50 x 1.5 mm with shutter stiles rail of aluminum section of size 47.62 x 44.45 x 1.5 mm thick includiing jointing cleat for fixing binder hardware glazing clips rubber packing for air lock purpose anodized aluminum strip bearing screw etc for fixing glass pans in frame shutter covered with fully selected quality tinted glass 5.5 mm thick tinted glass with rubber packing complete including fixing of required 125mm tower bolt & handles etc, complete all as specified and directed. |
| 20 | S&F solid PVC door frames of size 50mm X 47mm made out of 5mm plain color PVC sheet reinforced with MS square tube, complete all as specified and directed. |
| 21 | S&F factory made solid panel PVC door shutter, 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded, plain colour PVC \\"C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as per specification and drawing, complete all as specified and directed. |
| 22 | S & F 100mm long butt hings cold rolled mild steel & fixed to chowkats, complete all as specified and directed. |
| 23 | S & F aluminium anodised barrel tower bolts of size 125 mm extruded section and fixed, complete all as specified and directed. |
| 24 | S & F 125mm long aluminium handle cast type anodised, complete all as specified and directed. |
| 25 | S&F for steel work in tubular trusses, posts including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.11611979 grade, complete all as specified and directed. |
| 26 | S&F pre-painted galvalume aluminum zinc coating Gl based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tanning screws, complete all as specified and directed. |
| 27 | S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 28 | M&L for preparation of new previously untreated steel surface of any description (new galvanized steel surfaces) over 10 cmm in width or girth not otherwise described to receive painting, by coating with mordant solution including washing and cleaning and applying two coats of synthetic enamel paint over a coat of red pxide primer, complete all as specified and directed. |
| 29 | S&F mild steel plates, Fe-410 W (Gde-E250) quality B plain or chequerd, with riveted, bolted or welded attachment, complete all as specified and directed. |
| 30 | S & F Mild steel screw bolts (machine made) diameter of neck in 5-10mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long, complete all as specified and directed. |
| 31 | S&F of mild steel rag or lewis bolts, screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised, bolt exc 30cm long and dia 12-16mm, complete all as specified and directed. |
| 32 | M&L for plain cement concrete type C-1 1:3:6 (using 20mm graded crushed stone aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair without using extra cement incl making joints every 2.5m and corner filled with bitumen 85/25, complete all as specified and directed. |
| 33 | S& F vitreous china wash basin, white, flat back, size 550x400mm including waste chain & plug and porcelean stopper and including brackets, coupling 32mm, waste pipe, complete all as specified and directed. |
| 34 | S & F Stop/Angle valve 15mm bore, cast copper alloy screwed down, high kpressure, with crutch jor butter fly handlel, screwed bosth ends for iron pipe or for unions, complete all as specified and directed. |
| 35 | S&F CP fancy type mixer tap 15mm bore of standard quality for mixing hot & cold water (WHB) as approved by Engr-in-Charge with centre hole mixer with fittings, complete all as specified and directed. |
| 36 | S&F Pillar taps, cast copper alloy, 15 mm dia, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed. |
| 37 | S&F 600x450 mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 38 | S&F Vitreous China squatting pan \\"Orissa Pattern\\" size 580 x 440mm white with integral foot rests, complete all as specified and directed. |
| 39 | S&F PVC valveless syphonic action type flushing cistern,low level white with inlet ball valve float and handle of capacity 10 litres including brackets , with flush pipe etc fixed, complete all as specified and directed. |
| 40 | S&F Bib tap cast copper alloy chromium plated fancy type with crutch of butterfly handle, screwed down, screwed for iron pipe of for brass ferrule of 15mm bore (ISI marked) ,complete all as specified and directed. |
| 41 | S&F brass CP Wall mixer 2 in 1, 15 mm bore, for mixing hot and cold water, screwed down for iron pipe and fixed , complete all as specified and directed. |
| 42 | S&F 125mm Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union, complete all as specified and directed. |
| 43 | S & F tubular towel rail 60cm long, aluminium anodised fixed with and including CP brass screws and wooden/plastic cleats, complete all as specified and directed. |
| 44 | S&F Soap dish chromium plated,any type, fixed to wall with chromium plated brass screw, complete all as specified and directed. |
| 45 | S&F PVC (SWR) floor trap 75mm dia outlet, plain with grating including jointing with solvent cement, complete all as specified and directed. |
| 46 | S&F PVC connection 15mm dia and 600mm long with PTMT nuts and washer, complete all as specified and directed. |
| 47 | S&F PVC connection 15mm dia and 450mm long with PTMT nuts and washer, complete all as specified and directed. |
| 48 | S&F 110mm bore PVC (SWR) pipe single socket in any length with rubber ring jointed, fixed to wall /floor /laid in trenches etc., complete all as specified and directed. |
| 49 | S&F 110mm bore PVC (SWR) bend or tee or radius with access door, complete all as specified and directed. |
| 50 | S&F 110mm PVC (SWR) vent cowl, complete all as specified and directed. |
| 51 | S&F PVC(SWR) pipes of 75mm bore single socketed in any length with rubber ring joint fixed with wall, complete all as specified and directed. |
| 52 | S&F PVC (SWR) bends 75 mm dia any radius, complete all as specified and directed. |
| 53 | S&F PVC (SWR) junction single, (Single T) equal or unequal of 75mm dia, complete all as specified and directed. |
| 54 | S&F 16mm outer dia pipe of 3-layer PP-R Polypropylen e random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylen random fittings fixed complete to walls, ceilings or in floors etc including taking down old u/s 15 mm steel tubes and connections, complete all as specified and directed. |
| 55 | S&F 20mm outer dia pipe of 3-layer PP-R Polypropylen e random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylen random fittings fixed complete to walls, ceilings or in floors etc including taking down old u/s 20 mm steel tubes and connections, complete all as specified and directed. |
| 56 | S & F 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed. |
| 57 | Excavation in post holes (or similar holes ) in any type of soil each n exe 0.5 cu.m , gettting out and removing surplus soil to a distance n exe 50 m and making good surface, complete all as specified and directed. |
| 58 | S & F Compound girders & stanchions, lattice griders, aerial masts, staging for water tanks & the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates etc. of Gde Fe 410-W (Gde- E-250) Qty-B, complete all as specified and directed. |
| 59 | M&L for Plain Cement Concrete (1:2:4) type C2 (using 40mm graded crushed stone aggregate) as in foundation bed concrete etc., complete all as specified and directed. |
| 60 | S&F rotational moulded polyethylene water storage tank (cylindrical, vertical with closed top) hoisted and fixed in position incl all accessories of capacity 1000 litres, complete all as specified and directed. |
| 61 | S&F 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms), complete all as specified and directed. |
| 62 | M&L for plain Cement concrete type D- 2, 1:4:8 (using 40mm graded crushed stone aggregate) 75mm thick as in sub base of floors, complete all as specified and directed. |
| 63 | M&L Chequered cement concrete tiles 20cm x 20cm x 25mm thick with grey cement and no pigment laid over and including 15 mm thick screed bed or bedding layer of mortar for laying floor finishes in cement mortor 1:6 , complete all specified and as directed. |
| 64 | M&L for plain cement concrete type B0 1:2:4 (12.5mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete as specified and directed. |
| 65 | M&L for brick work with old size full brick th in Honey comb wall, brick subclass ‘B’ burnt clay bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4), complete all as specified and directed. |
| 66 | M&L for loose filling with brick bats of size 80 to 150mm in soakage wells, complete all as specified and as directed. |
| 67 | M&L for rendering15mm thick on fair faces of brick work or concrete surfaces in CM 1:4, complete all as specified and directed |
| 68 | M&L for Providing plain cement concrete type B2, 1:2:4 (using12.50 mm graded crushed stone aggregate) as in surface channels of manholes and drains, complete all as specified and directed. |
| 69 | M&L for Concrete bed to drain pipes including forming cradles in plain cement concrete1:4:8 type D2 using 40 mm graded crushed stone aggregate for PVC (SWR)/RCC, Soil pipes after they are laid and tested for 150 mm dia bore pipe, complete all as specified and directed. |
| 70 | S&F double wall corrurated, HDPE pipe, BIS marked amended upto date suitable for sewage/waste etc of size DN/ID 150mm, all as per IS 16098(Part-2), 2013 including jointing rings and necessary machionary to joint the sewers in-situ in trenches, trench prepares, complete all as specified and directed. |
| 71 | M & L for Precast reinforced cement concrete 1 : 2 : 4 Type B1 ( using 20 mm graded crushed stone aggregate) as in cover slab (for manholes etc), chajjas, mangers, shelves etc. set in cm 1 : 6 complete with joints to math., complete all as specified and directed. |
| 72 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) Flat including fair fininsh., complete all as specified and directed. |
| 73 | S&F TMT MS bar 10mm dia & over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia , complete all as specified and directed. |
| 74 | Supply of package type septic tank, polyethylene tank with capacity of 2000 ltr per day, with a diameter of 1830mm and height of 1830mm. Tank has three zones: septic zone , sedimentation zone and third zone is filling ring media zone having surface area of 140Sqmt and retain micro-organism long enough to digest the organic waste which results in 70% of BOD reduction from final outlet. It is provided with inlet and outlet pipe of 100mm dia, vent pipe of 50mm dia, internal piping, manhole cover of 400mm dia. Effective value : 30 Cum , Septic Tank Volume : 20 Cum , HRT : 32.0 hrs , Fixed-Film Tank Volume:1.0Cum, HRT ; 16.0Hrs, Total HRT (Hr) : 48.0Hrs, Pipe fitting in MM : inlet-100mm, Outlet-100mm, Vent- 50mm, Air – 20mm., complete all as specified and directed. |
| 75 | M&L for making single phasing point wiring system used as copper conductor wire for phase and neutral wiring system the wire made out of PVC insulated FRLS of 1100 volt grade with having multistranded copper conductor wire of size 1.5 Sq.mm (Nominal area) ISI marked drawn through wiring system surface on wall or concealed in wall with the help of heavy duty ISI mark PVC casing capping strip / PVC conduit pipe ISI mark in any lengthy wiring system and along with its all connected fittings accessories including providing of pressed steel terminal sunken boxes 1.2 mm thick or heavy duty PVC box and duly fixed it concealed in wall and overed to top with electro plated 3 mm thick plastic laminated sheet for housing/mounting of switches sockets, regulators etc and including using /drawing of one run of single wire 1.5 sqmm PVC insulated FRLS wire 1100 volt grade ISI marked with multistranded copper conductor wire used as a continuous earth wire for point wiring complete system and including making the good to all disturbed surfaces of wall/ceiling area of new wiring system and to match to it as per the existing surface of wall/ceiling etc complete all as specified and directed for the following :- |
| 76 | One light point / fan point /Exhaust fan controlled by one switch of one way point wiring system, complete all as specified and directed. |
| 77 | One 3/5 pin type 5 Amp socket outlet point fixed on same board and controlled by one switch of one way point wiring system, complete all as specified and directed. |
| 78 | One 3/5 pin type 5 Amp socket outlet point fixed on independent board and controlled by one switch of one way point wiring system, complete all as specified and directed. |
| 79 | Description all as per serial item No 75 here-in-before, but using single runs of PVC insulated FRLS wire ,1100 volt grade with multistranded copper conductor wire of size 2.5 Sq. mm (Nominal area) (ISI Marked) for15 Amp socket outlet point wiring system with controlled by one way switch and also providing of 2.5 sqmm PVC insulated FRLS wire , 1100 Volt grade (ISI Marked) with multistranded copper conductor wire used as continuous earth wire, complete all as specified and directed. |
| 80 | Supply and fixing of switch paino flush type single pole one way 5/6 Amps, complete all as specified and directed. |
| 81 | Supply and fixing of socket outlet two in one 3/5 pin multi pin type 5/6 Amps , complete all as specified and directed. |
| 82 | Supply and fixing of switch flush type single pole one way 15/16 Amps, complete all as specified and directed. |
| 83 | Supply and fixing of socket outlet two in one 5/6 pin multi pin type 15/16 Amps, complete as specified and directed. |
| 84 | Supply and fixing ceiling rose 03 terminals type made out of polycarbonate , isolated body complete all as specified and directed. |
| 85 | Supply and fixing of LED tube light fitting of 1x 20W/22W 220V AC batten type with driver, holder including LED tube light with having energy efficient type complete including providing of suitable type flate fexible cable for electric connection from ceiling rose to fitting, comlplete all as specified and directed . |
| 86 | Supply and fixing of angular/batten type shape lamp holder with PVC/ Polycarbonate insulated body, alongwith brass adhapor and back plate for housing of bulb, complete all as specified and directed . |
| 87 | Supply and fixing of LED bulb 9 watt, complete all as specified and directed. |
| 88 | S&F star rated electric wall mounted fan 400 mm sweep of single phase 230 volt AC with having pull cord oscillating type single piece AS blade, three speed pull cord control complete with blade and guard framing support & connecting accessories and fixed/grouting on wall/roof with MS fastner, nut & bolt including providig flate flexible copper wire and making all electrical connection, complete all as specified and directed. |
| 89 | Supply and fixing of LED street light fitting of rated capacity 35 Watt 230 volt AC with having LED driver,lamp bracket with impact and corrosion resistant including thermal management in multiple optices complete with IP 65/66 protectiuon suitable for out door type made out of high pressure die cast hosing with heat resistant glass complete light fitting set including providing of suitable dia of GI bracket and it to as per match/setting thefitting fixture base hole attechment system and including providing of suitable type of flate fexible two/three core cable and makong electric connection, complete all as specified and directed. |
| 90 | S&F star rated ventilating exhaust fan made out of sturdy engineering plastic body complete with louvers and shutter, 250 mm sweep, 230 Volts AC single phase, 50Hz, 1200 RPM, coper winding including making of suitable type /size of hole on any type of wall and fixing compete with nut, bolt etc and making good distrubed surface of wall/ceiling & finishes to match and providig flate flexible copper wire & making all electrical connection complete, all as specified and directed. |
| 91 | Supply and fixing of sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrengment system suitable of size/type of distribution board of rating SPN 8 way type 220 volt AC supply system with IP protection rating with ISI marked and having neutral and earth link bus bar and mounting base chanel suitable for holding MCBs incommer and s outgoing system complete set and including dully fixed surface on wall or concealed in wall and making all necessary electrical and also refixing the all electric meter and making its wiring connection including taking down of existing meter and DBs, complete all as specified and directed |
| 92 | Supply and fixing of sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrengment system suitable of size/type of distribution board of rating SPN 4 way type 220 volt AC supply system with IP protection rating with ISI marked and having neutral and earth link bus bar and mounting base chanel suitable for holding MCBs incommer and s outgoing system complete set and including dully fixed surface on wall or concealed in wall and making all necessary electrical and also refixing the all electric meter and making its wiring connection including taking down of existing meter and DBs complete all as specified and directed |
| 93 | S&F MCB SP 6 to 32 Amps, 240 Volts, 50 Hz AC supply suitable for 'C' series, 10 KA breaking capacity, complete all as specified and directed. |
| 94 | Supply and fixing of MCB SPN 40 to 63 Amps, 230 Volts, 50 Hz AC supply suitable for 'C' series, 10 KA breaking capacity, complete all as specified and directed. |
| 95 | Supply , laying and testing of LT cable XLPE insulated screened,PVC bedded galvanized steel strip or wire armoured electric power cable ( heavy duty ) with aluminium conductor 1100 volt grade cross section area of size 16 sqmm 2 core including laid in trenches or fixing on poles or passing through pipes complete including taking out of old unserviceable cable any type any size, complete all as specified and directed. |
| 96 | M&L for locally available river sand in trenches 15 cm below cable and 8cm above / around UG cable for cable protection, in duct under and above the cables including punning around cable, complete all as specified and directed.Note: - Punned thickness shall only be measured and paid. |
| 97 | M&L for brick covering width equal to length of brick for mechanical protection to cable with well burnt sub class 'B' bricks laid dry flat, complete all as specified and directed. |
| 98 | S & F Storage type Water heater (Geyser) 5 STAR of Cap 50 Ltrs working on 230 volts AC supply with in and out going water connection pipe (Hot & Cold) fixing arrangement with nut bolts and making good the disturbed surface, complete all as specified and as directed. |
| 99 | Supply & Fixing of GI Water Tubing 25mm bore light grade, galvanised with all fitting like socket, union, elbow , band etc jointed and laid in trenches, complete all as specified and directed. |
| 100 | Material and labour for earthing, complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (Earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.5 mtr below normal ground level connecting to the galvanised iron earth lead wire of 4 mm dia by means of bolts, nuts, check nuts and washers of galavanised iron and earth strip protected by provision of GI light grade pipe 20 mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded of stone aggregate with XPM (weight not less than 4 Kg/Sqm) and frame of angle iron 25x25x6mm with lugs 02 Nos and with 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate common salt and charcoal filling test point made out of 40mm/6mm flat iron with fixing arrangement funnel wire mesh and earth work in hard dense soil returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs all as per electrical plate No 03 of SSR-2009 Part-I and connecting to earth test point complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysDec 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender