Power Boards / Undertakings / PSU Closing in 17 days TDR #58646139

Tender For Construction Of 66 Kv Double Bus Bar System, Replacement Of Defunct 100 Mva, 220/132 Kv Auto Transformer T-3 To 100 Mva 220/132 Kv Auto Transformer, Additional 3Rd 20 Mva 66/11 Kv Transformer Plinth And Allied Civil Works At 220 Kv S/S Ver

Issued by Boards / Undertakings / PSU · Amritsar, Punjab
Tender Value
96.08 Lakhs
Estimated cost
Bid Submission
08 Dec 2026
17 days left
EMD
1.92 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Amritsar → Punjab
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Construction Of 66 Kv Double Bus Bar System, Replacement Of Defunct 100 Mva, 220/132 Kv Auto Transformer T-3 To 100 Mva 220/132 Kv Auto Transformer, Additional 3Rd 20 Mva 66/11 Kv Transformer Plinth And Allied Civil Works At 220 Kv S/S Verpal

BOQ

Name of Work:- Construction of 66 kV Double Bus Bar System, Replacement of defunct 100 MVA, 220/132 kV Auto Transformer T-3 to 100 MVA 220/132 kV Auto Transformer, Additional 3rd 20 MVA 66/11 kV Transformer Plinth and allied civil Works at 220 kV S/S Verpal
Sl. No. Item Description
1Earth work in excavation in foundations, trenches etc. In all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches , stacking the excavated soil clear from the edge of excavation and subsequent filling around masonary in 15 cm layers with compaction including diposal of all surplus soil as directed within a lead of 30 metres.
2Shuttering for faces of concrete foundations and foundationbeam & plinth beam (vertical or battering)
3Centering and shuttering for faces of walls, partitions, retaining walls and the like (vertical or battering including attached pilasters buttresses etc.
4Centering and shuttering for columns (Square or rectangularor poly gonal in plain)
5Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.
6Cement Concrete 1:6:12 with stone aggregate 40mm gauge(mixing by mechanical means using concrete mixer volumetric type)
7Cement concrete 1:5:10 with stone aggregate 40mm gauge mixing by mechanical means using concrete mixer volumetric type
8Cement concrete 1:4:8 With stone aggregate 40mm gauge mixing by mechanical means using concrete mixer volumetric type
9Cement concrete 1:2:4 With stone ballast or shingle mixing by mechanical means using concrete mixer volumetric type
10Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth.
11Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS : 1791 and vibrated by needle vibrator but excluding steel reinforcement centering and shuttering in superstructure .
12Supplying & laying dry brick bats
13Extra for using needle vibrator where not included in the rates .
14First class burnt work laid in cement sand mortar 1:7 in foundation and plinth
15First class burnt brick laid in cement sand mortar 1:6 in foundation and plinth
16First class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level.
17First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth
18115mm thick brick wall in cement sand mortar 1:4 without reinforcement in foundations and plinth
19Extra labour for First class burnt brick masonry in well steining of circular well.
20Conglomerate floor 25mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material
21Conglomerate floor 50mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material
2212.5 mm thick cement plaster 1:3
2312.5 mm thick cement plaster 1:4
2412.5 mm thick cement plaster 1:5
2520 mm thick cement plaster 1:4 in two coat work
26Painting two or more coats with anticorrosive bitumastic Paint to give an even shade
27Finishing with epoxy paint two or more coat at all locations prepared and applied as per manufacturer specifications complete.
28Steel work fixed independently without connecting plates including cutting hoisting and fixing in position R S Joists
29Steel work fixed independently without connecting plates including cutting hoisting and fixing in position FLATS (Labour Rate)
30Nuts & Bolts of all sizes and length required
31Mild steel requirement for RCC work where not including the complete rate of RCC including bending, binding and placing in position complete in all respects. Above 20mm dia bars (Labour Rate)
32Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete. (Labour Rate)
33Welding by gas or by electric plant, including carriage to and from workshop etc.
34Wet Mix Macadam Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density complete as per technical clause 406 of MORT&H specifications
35Brick on end edging Providing and laying of Brick on end edging 6.83cm wide, 11.11cm long and 22.86cm high half brick deep including excavation, refilling and disposal of surplus earth up to 50mtr complete as per Punjab PWD specifications
36Joint Sealing Compound Providing and filling joint sealing compound with coarse sand and 6 percent bitumen by weight complete as per drawings and technical clause 2605 of MORT&H specifications
37Boring for hand-pump in clay fitting strainer and pipe. Above 75mm dia bore but not exceeding 100mm. From 0 to 15 m.
38Boring for hand-pump in clay fitting strainer and pipe. Above 75mm dia bore but not exceeding 100mm. Exceeding 15 m but upto 30 m.
39Boring for hand-pump in clay fitting strainer and pipe. Above 75mm dia bore but not exceeding 100mm. Above 30m.
40Hand pumps Lowering pipe in the hole up to 40mm dia.
41Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. 110mm o/d pipe of 10 Kgf. / sqcm
42Foot Rest for Manhole. Providing orange colour safety footrest of minimum 6mm thick plastic encapsulated as per IS:10910 on 12mm dia steel bar confirming to IS: 1786 having minimun cross section as 23mm x 25mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protruted legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specification and having manufacturer's permanent identification mark to be visible even after fixing, including fixing in manholes with 230x150x75cm cement concrete block 1:2:4 (1 cement: 2 sand: 4 stone aggragate) complete as per design.
43Providing and fixing in position gratings 150mm x 150mm for gully trap. H.C.I. grating including painting with black bitumastic superior paint of approved manufacture three coats.
44P & F of MS Tappered washers/Cleats 65X65X19mm to 6 mm for T/F Plinth.
45P & F MS Base Plate 235X220X12 MM for T/F Plinth
46P&F of MS Angle Nosing made out of 50x50x6mm angle iron for T/F Plinth.
47Providing & Fixing Cable Racks of various sizes
48P&F MS Angle iron Nozzing made out of 50x50x3 mm angle iron for cable trenches
49Suppling and Hoisting of Ferro Cement Trench Covers of size 2'8\\" x 1'6\\"R Type, T-1 & T-2 Type
50Suppling and Hoisting of Ferro Cement Trench Covers of size 1'9\\" x 2'6\\" T-4 Type
51Suppling and Hoisting of Ferro Cement Trench Covers of size 3'4\\"x1'6\\" T-p Type
52Cement Slurry of cement to sand ratio 1:6 with cement content not less than 150kg/100 sqm
53Suppling and Spreading of Gravel in yard area as per AOR
54Laying PCC Flooring Cement Concrete 1:5:10 with crushed stone and Stone Aggregate as per AOR
55P&F Template along with foundation bolts as per drawing
56Disposal of debries as per AOR
57Extra Carriage of material- Cement
58Extra Carriage of material- Steel
59Extra Carriage of material- Fine sand
60Extra Carriage of materials & diff. of rates of material- Coarse Aggregate 12/13.2 mm
61Extra Carriage of materials & diff. of rates of material- Bricks
62Extra Carriage of materials & diff. of rates of material- Coarse Aggregate 10/11.2 mm
63Extra Carriage of materials & diff. of rates of material- Coarse Sand
64Extra Carriage of materials & diff. of rates of material- Stone metal 40mm
65Extra Carriage of materials & diff. of rates of material- Stone metal 63 -45 mm Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58646139
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE 96.08 Lakhs
LAST DATE 08-12-2026
Authority
Authority Name Punjab State Transmission Corporation Limited
Work Description Tender for Construction Of 66 Kv Double Bus Bar System, Replacement Of Defunct 100 Mva, 220/132 Kv Auto Transformer T-3 To 100 Mva 220/132 Kv Auto Transformer, Additional 3Rd 20 Mva 66/11 Kv Transformer Plinth And Allied Civil Works At 220 Kv S/S Verpal
Basic Detail
Tender No CWJ/T-28/2026-27
Bidding Type Tender
Location
City Amritsar
State Punjab
Key Dates
Publish Date 20 Nov 2026
Submission Date 08 Dec 2026
Open Date 09 Dec 2026
Finance
Tender Value 96.08 Lakhs
Tender Fee Ref. Documents
EMD 1.92 Lakhs
Exemption Available
Document List
BOQ_367131.xls
cf592653-6298-4a45-bf62-5b639c58e7cd.html
DNIT28.pdf
TC28.pdf
TCAR28.pdf
TECHSPEC1.pdf
TECHSPEC2.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 20, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 08, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 17 days
Dec 09, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 18 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_367131.xls

html

cf592653-6298-4a45-bf62-5b639c58e7cd.html

pdf

DNIT28.pdf

pdf

TC28.pdf

pdf

TCAR28.pdf

pdf

TECHSPEC1.pdf

pdf

TECHSPEC2.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender