Tender For Development Of Gou-Seva Kendra At Remja.
Tender Value
19.90 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
3 days left
EMD
19900
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jharsuguda → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Development Of Gou-Seva Kendra At Remja.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in hard soil or gravelly soil within 50m. Initial lead and 1.5m. Initial lift icluding rough dressing and bracking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m. in depth and as per the direction of the engineer-in-charge. |
| 2 | Filling in foundation & plinth with sand watered & rammed including cost, conveyance royalty etc., Complete. |
| 3 | C:C: (1:4:8) using 4 cm. size H.G. C.B metal including the cost of all materials, labour carriage, royalty etc complete. |
| 4 | Brick work with Flyash bricks 23cm x 11cm x 8cm size having crushing strength not less than 75 Kg/cm2 with dimensional tolerance ±8 percent in cement mortar (1:6) in foundation and plinth. |
| 5 | Brick work with Flyash bricks 23cm x 11cm x 8cm size having crushing strength not less than 75 Kg/cm2 with dimensional tolerance ±8 percent in cement mortar (1:6) in Add for superstructure extra labour for scaffolding |
| 6 | RCC work of M20 Grade with 20 mm sizeand down graded black hard granite chips including cost, conveyance and royalty of all materials, cost of all labour,T&P etc. complete |
| 7 | Rigid and smooth centering and shuttering for CC works including false work and dismentalling then after casting including cost of materials complete in ground floor. A) Foundation and Plinth Band |
| 8 | Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification. |
| 9 | 12 mm. thick C.P (1:6) with all cost, conveyance and royalty etc. all complete. |
| 10 | 16 mm. thick cement plaster (1:6) over brick or stone masonry. per 1 Sqm |
| 11 | 2.5cm artificial stone flooring with cement concrete (1:2:4) including punning using 12 mm size hand broken granites chips. (See Page no-84,Item no 2 of AoR-06) |
| 12 | 4 cm thick grading concrete (1:2:4) on roof slab with 12mm & down grade size black hard granite chips for old work .Per 1 Sqm (See Page no-48,Item no 18 of AoR-06) |
| 13 | Fixing Vitrified tiles (AGL wooden (Mat Finish) 600x600mm)in floors treads of steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete. Data for 10 Sqm |
| 14 | Priming 1 coat with any appproved Primer (wood) including cost of primer etc. complete |
| 15 | Wall painting 2 coats with plastic emulsion paint of approved shade on new work to give an even shade inculding cost of paint (For 10 Sqm.) |
| 16 | Finishing walls with Weather Coat of approved shade on new work two coat to give an even shade inculding cost of paint. Per 1 Sqm. |
| 17 | Supplying all materials, labour, T&P for providing Mild Steel tubular, Post or rectangular purlins with runners bracing for tubular trusses made out of ERW tubes of O.D.76.1 mm and 3.15 mm thick Grade YST 210 conforming to ISS no.1161/79 (3rd Revision) duly painted with red oxide primer etc. complete. |
| 18 | Supplying fitting & fixing of Precoated Galvanized iron Profile sheet semi gloss of 1000mm width & total coated thickness 0.50mm in roof drilling hole in wind ties including fixing of ridges valleys, wind ties etc. complete including cost of sheet & all fitting (per 1 Sq. Mtr.) |
| 19 | Supplying fitting & fixing of Colour coated ridges at Middle of the Roof etc. all complete. |
| 20 | Supplying, fitting and fixing of M.S Iron Door & window etc. all complete. |
| 21 | Painting two coats with approved paint on new wood work (labour only) |
| 22 | Electrification |
| 23 | Sanitation |
| 24 | Earth work in hard soil or gravelly soil within 50m. Initial lead and 1.5m. Initial lift icluding rough dressing and bracking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m. in depth and as per the direction of the engineer-in-charge. |
| 25 | Filling in foundation & plinth with sand watered & rammed including cost, conveyance royalty etc., Complete. |
| 26 | C:C: (1:4:8) using 4 cm. size H.G. C.B metal including the cost of all materials, labour carriage, royalty etc complete. |
| 27 | Labour for laying sub-base in layers not exceeding 100 mm watering and compacting to the required density in O.M.C with Power Road Roller including cost and conveyance of sub base materials,hire and running charges of PRR . (See Page no-142,Item no 8 of AoR-6) |
| 28 | CC work of M20 Grade with 20 mm sizeand down graded black hard granite chips including cost, conveyance and royalty of all materials, cost of all labour,T&P etc. complete |
| 29 | Rigid smooth centering and shuttering for CC works including false works and dismantling them after casting including cost of materials complete in G.F. (A)Foundation & Plinth |
| 30 | Providing and Laying Factory made Chamfered edge Cement Concrete Paver Blocks of required strength, thickness & size/shape made by table Vibratory method to attain superior smooth finish using PU or Equivalent moulds, Laid in required gray colour and Pattern over 50mm thick Compacted bed of coarse sand, compacting and proper embedding / laying of interlocking Paver Blocks into the sand bedding layer through vibratory compaction by using plate vibrator, Filling joints with Fine sand and cutting of Paver blocks as per required size/ Pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways, or light traffic parking and Lanes/Road etc, all complete as per Manufactures Specifications and Direction of Engg -ln- Charge. 80mm thick C.C. Paver Blocks of M-40 grade with approved colour design Pattern etc. complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysNov 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender