Tender For Improvement Of Dhenkanal Korian Chhak To Bhojdeipur Sasan Siva Mandir Via Ranapasi Road From0/00 Km To 10/620 Km In The District Of Dhenkanal Under State Plan For The Year 2025-26 For Utility Shifting.
Tender Value
89.48 Lakhs
Estimated cost
Bid Submission
05 Dec 2026
13 days left
EMD
89485
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dhenkanal → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvement Of Dhenkanal Korian Chhak To Bhojdeipur Sasan Siva Mandir Via Ranapasi Road From0/00 Km To 10/620 Km In The District Of Dhenkanal Under State Plan For The Year 2025-26 For Utility Shifting.
BOQ
| Sl. No. | Item Description |
| 1 | PART NN-A: Construction of 3Ph LT line using 4Cx95 (P)+1Cx95 (M)+1Cx16 (street light) AB cable - 0.7 Km (Part A)1. Supply of materials9 Mtr. long PSC Pole PART NN-A |
| 2 | GI flat for danger plate and anticlimbing device PART NN-A |
| 3 | LT Stay set Complete PART NN-A |
| 4 | 7/12 SWG GI stay wire, Grade -2 PART NN-A |
| 5 | LT stay Clamp PART NN-A |
| 6 | LT Stay insulator PART NN-A |
| 7 | Pole clamp for EYE hook for (XLPE Aerial bunched Cable) PART NN-A |
| 8 | EYE hook for XLPE Aerial bunched Cable PART NN-A |
| 9 | Dead End Clamp suitable for messenger XLPE Aerial bunched Cable PART NN-A |
| 10 | Suspension Clamp with EYE hook for ABC PART NN-A |
| 11 | 4C×95 mm² (P)+1C×95 mm²(M)+1CX16 mm²(Street Light) (LT AB Cable) PART NN-A |
| 12 | Insulated piercing connector.Type-A-main 50 to 150 sq.mm & Tap-50 to 150 sq.mm PART NN-A |
| 13 | GI Pipe Earthing (each 5th pole to earth) PART NN-A |
| 14 | Coil Earthing PART NN-A |
| 15 | Danger plate (LT) PART NN-A |
| 16 | GI barbed wire anticlimbing device PART NN-A |
| 17 | GI Nut , Bolt & Washer of different sizes PART NN-A |
| 18 | 2. Civil, erection & survey worksFixing of complete Stay Set with all accessories and civil works PART NN-A |
| 19 | Concreting of Pole @ 1:1.5:3(M-20 Grade) PART NN-A |
| 20 | Construction of Earthing chamber incuding earthing pipe and civil works PART NN-A |
| 21 | Painting of Pole in Black & Yellow strips/Zebra PART NN-A |
| 22 | GIS Mapping, indexing/numbering of Poles PART NN-A |
| 23 | GIS coordinate mapping, drawing preparation and submission of the same for New/Existing line PART NN-A |
| 24 | PART NN-B: Dismantling of materials against shifting (Part B)1. Dismantling worksDismantling of 9/8 Mtr. PCC/Joist Pole PART NN-B |
| 25 | Dismantling of various size of LT AB Cable PART NN-B |
| 26 | PART A: Construction of 11/0.4 KV, 25 KVA DP mounted DSS using 11 Mtr WPB (GI) pole 160x152 without transformer - 1 No (Part A)1. Supply of materialsWPB (GI) Pole 160x152 11 Mtr. Long for DP PART A |
| 27 | GI Channel, angle & flat of different size PART A |
| 28 | LT Distribution Box for 25 KVA S/S PART A |
| 29 | 55 SQ.MM. AAAC XLPE Covered Conductor PART A |
| 30 | 4 Cx 50 mm2 LT XLPE Cable(Armoured) - FOR 25 KVA Trf. PART A |
| 31 | 4 Cx 50 mm2 LT XLPE Cable(Armoured) - From LTDB to PSC Pole PART A |
| 32 | HDPE pipe of 110 mm diameter, PE 80- PN8 PART A |
| 33 | AB Switch(11KV,200A.3pole,50Hz) PART A |
| 34 | DO.Fuse( 11KV.200A.3Pole) PART A |
| 35 | 2.5 AMP Fuse Link PART A |
| 36 | WEDGE CONNECTOR FOR 55 SQMM.CONDUCTOR PART A |
| 37 | POLYCARBONATE BIRD GUARD PART A |
| 38 | Disc insulator (B&S)70 KN polymer PART A |
| 39 | H W fitting (B&S)70KN(3bolted) PART A |
| 40 | Lightning Arrester(12KV,10KA) Station Class 2 PART A |
| 41 | DMC Insulator for LA (70/10) PART A |
| 42 | HT stay set complete PART A |
| 43 | HT stay Clamp PART A |
| 44 | HT stay insulator TYPE-C PART A |
| 45 | 7/10 SWG GI stay wire, Grade -2 PART A |
| 46 | Gi Pipe Earthing 40mm. 3 Mtr. Long PART A |
| 47 | GI Nuts & Bolts of Assorted size PART A |
| 48 | GI Barbed wire/Anticlimbing device PART A |
| 49 | Danger plate 11kv PART A |
| 50 | 2. Civil, erection & survey worksConcreting of Pole @ 1:1.5:3(M-20 Grade) PART A |
| 51 | Couping of Pole @ 1:1.5:3(M-20 Grade) PART A |
| 52 | PCC ratio 1:3:6(M-10 Grade) For DSS Area PART A |
| 53 | Supplying, Laying, spreading and compacting with hand roller stone aggregate of PART A |
| 54 | Fixing of HT complete Stay Set with all accessories and civil works PART A |
| 55 | Construction of Earthing chamber incuding earthing pipe and civil works PART A |
| 56 | LTDB Plinth PART A |
| 57 | Laying of 110mm dia PE 80-PN8, HDPE pipe inside open trench. PART A |
| 58 | Laying of 4 Cx 50 mm2 LT XLPE Cable PART A |
| 59 | SITC of Aluminium Lugs suitable for 50 sq mm cable/conductor PART A |
| 60 | SITC of termination kit of 1.1kV 3.5C/4C 35-120 sqmm PART A |
| 61 | SITC of double Compression Flameproof Type Glanding for armored Cable 3.5/4C 16-35sqmm PART A |
| 62 | Earth work excavation of soil PART A |
| 63 | Earth work excavation of hard rock PART A |
| 64 | Back filling with excavated soil outside and above the trench PART A |
| 65 | Painting of Pole in Black & Yellow strips/Zebra PART A |
| 66 | GIS coordinate mapping, drawing preparation and submission of the same for DSS. PART A |
| 67 | SITC of DCP Extinguisher (6KG) PART A |
| 68 | SITC Display Board/Sign Board PART A |
| 69 | GI chain link fencing for DSS PART A |
| 70 | PART B: Construction of 11/0.4 KV, 63 KVA DP mounted DSS using 11 Mtr WPB (GI) pole 160x152 without transformer - 2 Nos (Part B)1. Supply of materialsWPB (GI) Pole 160x152 11 Mtr. Long for DP PART B |
| 71 | GI Channel, angle & flat of different size PART B |
| 72 | LT Distribution Box for 63 KVA S/S PART B |
| 73 | 55 SQ.MM. AAAC XLPE Covered Conductor PART B |
| 74 | 4 Cx 95 mm2 LT XLPE Cable(Armoured) - FOR 63 KVA Trf. PART B |
| 75 | 1.1kV, 4Core, 95sqmm, XLPE insulation armoured -Aluminium UG cable from LTDB to Pole PART B |
| 76 | HDPE pipe of 110 mm diameter, PE 80- PN8 PART B |
| 77 | AB Switch(11KV,200A.3pole,50Hz) PART B |
| 78 | DO.Fuse( 11KV.200A.3Pole) PART B |
| 79 | 10 AMP Fuse Link PART B |
| 80 | WEDGE CONNECTOR FOR 55 SQMM.CONDUCTOR PART B |
| 81 | POLYCARBONATE BIRD GUARD PART B |
| 82 | Disc insulator (B&S)70 KN polymer PART B |
| 83 | H W fitting (B&S)70KN(3bolted) PART B |
| 84 | Lightning Arrester(12KV,10KA) Station Class 2 PART B |
| 85 | DMC Insulator for LA (70/10) PART B |
| 86 | HT stay set complete PART B |
| 87 | HT stay Clamp PART B |
| 88 | HT stay insulator TYPE-C PART B |
| 89 | 7/10 SWG GI stay wire, Grade -2 PART B |
| 90 | Gi Pipe Earthing 40mm. 3 Mtr. Long PART B |
| 91 | GI Nuts & Bolts of Assorted size PART B |
| 92 | GI Barbed wire/Anticlimbing device PART B |
| 93 | Danger plate 11kv PART B |
| 94 | 2. Civil, erection & survey worksConcreting of Pole @ 1:1.5:3(M-20 Grade) PART B |
| 95 | Couping of Pole @ 1:1.5:3(M-20 Grade) PART B |
| 96 | PCC ratio 1:3:6(M-10 Grade) For DSS Area PART B |
| 97 | Supplying, Laying, spreading and compacting with hand roller stone aggregate of PART B |
| 98 | Fixing of HT complete Stay Set with all accessories and civil works PART B |
| 99 | Construction of Earthing chamber incuding earthing pipe and civil works PART B |
| 100 | LTDB Plinth PART B |
| 101 | Laying of 110mm dia PE 80-PN8, HDPE pipe inside open trench. PART B |
| 102 | Laying of 4 Cx 95 mm2 LT XLPE Cable PART B |
| 103 | SITC of Aluminium Lugs suitable for 95 sq mm cable/conductor PART B |
| 104 | SITC of termination kit of 1.1kV 3.5C/4C 35-120 sqmm PART B |
| 105 | SITC of double Compression Flameproof Type Glanding for armored Cable 3.5/4C 50-95sqmm PART B |
| 106 | Earth work excavation of soil PART B |
| 107 | Earth work excavation of hard rock PART B |
| 108 | Back filling with excavated soil outside and above the trench PART B |
| 109 | Painting of Pole in Black & Yellow strips/Zebra PART B |
| 110 | GIS coordinate mapping, drawing preparation and submission of the same for DSS. PART B |
| 111 | SITC of DCP Extinguisher (6KG) PART B |
| 112 | SITC Display Board/Sign Board PART B |
| 113 | GI chain link fencing for DSS PART B |
| 114 | PART C: Construction of 11/0.4 KV, 100 KVA DP mounted DSS using 11 Mtr WPB (GI) pole 160x152 without transformer - 1 No (Part C)1. Supply of materialsWPB (GI) Pole 160x152 11 Mtr. Long for DP PART C |
| 115 | GI Channel, angle & flat of different size PART C |
| 116 | LT Distribution Box for 100 KVA S/S PART C |
| 117 | 55 SQ.MM. AAAC XLPE Covered Conductor PART C |
| 118 | 4 Cx 150 mm2 LT XLPE Cable(Armoured) - FOR 100 KVA Trf. PART C |
| 119 | 1.1kV, 4Core, 150 sqmm, XLPE insulation armoured -Aluminium UG cable from LTDB to Pole PART C |
| 120 | HDPE pipe of 110 mm diameter, PE 80- PN8 PART C |
| 121 | AB Switch(11KV,200A.3pole,50Hz) PART C |
| 122 | DO.Fuse( 11KV.200A.3Pole) PART C |
| 123 | 10 AMP Fuse Link PART C |
| 124 | WEDGE CONNECTOR FOR 55 SQMM.CONDUCTOR PART C |
| 125 | POLYCARBONATE BIRD GUARD PART C |
| 126 | Disc insulator (B&S)70 KN polymer PART C |
| 127 | H W fitting (B&S)70KN(3bolted) PART C |
| 128 | Lightning Arrester(12KV,10KA) Station Class 2 PART C |
| 129 | DMC Insulator for LA (70/10) PART C |
| 130 | HT stay set complete PART C |
| 131 | HT stay Clamp PART C |
| 132 | HT stay insulator TYPE-C PART C |
| 133 | 7/10 SWG GI stay wire, Grade -2 PART C |
| 134 | Gi Pipe Earthing 40mm. 3 Mtr. Long PART C |
| 135 | GI Nuts & Bolts of Assorted size PART C |
| 136 | GI Barbed wire/Anticlimbing device PART C |
| 137 | Danger plate 11kv PART C |
| 138 | 2. Civil, erection & survey worksConcreting of Pole @ 1:1.5:3(M-20 Grade) PART C |
| 139 | Couping of Pole @ 1:1.5:3(M-20 Grade) PART C |
| 140 | PCC ratio 1:3:6(M-10 Grade) For DSS Area PART C |
| 141 | Supplying, Laying, spreading and compacting with hand roller stone aggregate of PART C |
| 142 | Fixing of HT complete Stay Set with all accessories and civil works PART C |
| 143 | Construction of Earthing chamber incuding earthing pipe and civil works PART C |
| 144 | LTDB Plinth PART C |
| 145 | Laying of 110mm dia PE 80-PN8, HDPE pipe inside open trench. PART C |
| 146 | Laying of 4 Cx 150 mm2 LT XLPE Cable PART C |
| 147 | SITC of Aluminium Lugs suitable for 150 sq mm cable/conductor PART C |
| 148 | SITC of termination kit of 1.1kV 3.5C/4C 150-240 sqmm PART C |
| 149 | SITC of double Compression Flameproof Type Glanding for armored Cable 3.5/4C 120-185sqmm PART C |
| 150 | Earth work excavation of soil PART C |
| 151 | Earth work excavation of hard rock PART C |
| 152 | Back filling with excavated soil outside and above the trench PART C |
| 153 | Painting of Pole in Black & Yellow strips/Zebra PART C |
| 154 | GIS coordinate mapping, drawing preparation and submission of the same for DSS. PART C |
| 155 | SITC of DCP Extinguisher (6KG) PART C |
| 156 | SITC Display Board/Sign Board PART C |
| 157 | GI chain link fencing for DSS PART C |
| 158 | PART D1: 11 KV line with 55 sq.mm XLPE AAA covered conductor 2 Ckm - 2 Nos DP without AB switch (Part D-1)1. Supply of materialsWPB (GI) Pole 160x152 11 Mtr. Long for DP PART D1 |
| 159 | GI Channel, angle & flat of different size PART D1 |
| 160 | Danger Plate PART D1 |
| 161 | H.T. Stay clamp PART D1 |
| 162 | H.T. Stay set (Complete ) PART D1 |
| 163 | H.T. Stay Insulator Type-C PART D1 |
| 164 | 7/10 SWG Stay Wire PART D1 |
| 165 | Gi Pipe Earthing 40mm. 3 Mtr. Long PART D1 |
| 166 | GI barbed wire anticlimbing device PART D1 |
| 167 | 11 KV pin insulator polymer PART D1 |
| 168 | NON METALLIC TIES-11KV 55 SQMM CVRD AAAC PART D1 |
| 169 | IPC for 55 sq.mm AAA conductor (For covered conductor)-11 kV PART D1 |
| 170 | Spike (GI ) ( 2 Nos of spike per Set in each Pole ) PART D1 |
| 171 | Dead end assembly with accessories for 55 Sq.mm. AAAC PART D1 |
| 172 | Disc insulator (B&S) 70 KN polymer PART D1 |
| 173 | GI Nut , Bolt & Washer of different sizes PART D1 |
| 174 | 2. Civil, erection & survey worksFixing of complete Stay Set with all accessories and civil works PART D1 |
| 175 | Concreting of Pole @ 1:1.5:3(M-20 Grade) PART D1 |
| 176 | Couping of Pole @ 1:1.5:3(M-20 Grade) PART D1 |
| 177 | Construction of Earthing chamber incuding earthing pipe and civil works PART D1 |
| 178 | GIS Mapping, indexing/numbering of Poles PART D1 |
| 179 | Painting of Pole in Black & Yellow strips/Zebra PART D1 |
| 180 | PART D2: 11 KV cut points with 180 degree angle, 2 Nos (Part D-2)1. Supply of materialsWPB (GI) Pole 160x152 11 Mtr. Long for SP PART D2 |
| 181 | GI Channel, angle & flat of different size PART D2 |
| 182 | Danger Plate PART D2 |
| 183 | H.T. Stay clamp PART D2 |
| 184 | H.T. Stay set (Complete ) PART D2 |
| 185 | H.T. Stay Insulator Type-C PART D2 |
| 186 | 7/10 SWG Stay Wire PART D2 |
| 187 | GI barbed wire anticlimbing device PART D2 |
| 188 | 11 KV pin insulator polymer PART D2 |
| 189 | NON METALLIC TIES-11KV 55 SQMM CVRD AAAC PART D2 |
| 190 | IPC for 55 sq.mm AAA conductor (For covered conductor)-11 kV PART D2 |
| 191 | Spike (GI ) ( 2 Nos of spike per Set in each Pole ) PART D2 |
| 192 | Dead end assembly with accessories for 55 Sq.mm. AAAC PART D2 |
| 193 | Disc insulator (B&S) 70 KN polymer PART D2 |
| 194 | Earthing of Support ( Coil Type ) PART D2 |
| 195 | GI Nut , Bolt & Washer of different sizes PART D2 |
| 196 | 2. Civil, erection & survey worksConcreting of Pole @ 1:1.5:3(M-20 Grade) PART D2 |
| 197 | Couping of Pole @ 1:1.5:3(M-20 Grade) PART D2 |
| 198 | Fixing of complete Stay Set with all accessories and civil works PART D2 |
| 199 | GIS Mapping, indexing/numbering of Poles PART D2 |
| 200 | Painting of Pole in Black & Yellow strips/Zebra PART D2 |
| 201 | PART D3: 11 KV cut points with 90 degree angle, 8 Nos (Part D-3)1. Supply of materialsWPB (GI) Pole 160x152 11 Mtr. Long for SP PART D3 |
| 202 | GI Channel, angle & flat of different size PART D3 |
| 203 | Danger Plate PART D3 |
| 204 | GI barbed wire anticlimbing device PART D3 |
| 205 | 11 KV pin insulator polymer PART D3 |
| 206 | NON METALLIC TIES-11KV 55 SQMM CVRD AAAC PART D3 |
| 207 | IPC for 55 sq.mm AAA conductor (For covered conductor)-11 kV PART D3 |
| 208 | Spike (GI ) ( 2 Nos of spike per Set in each Pole ) PART D3 |
| 209 | Dead end assembly with accessories for 55 Sq.mm. AAAC PART D3 |
| 210 | Disc insulator (B&S) 70 KN polymer PART D3 |
| 211 | Earthing of Support ( Coil Type ) PART D3 |
| 212 | H.T. Stay clamp PART D3 |
| 213 | H.T. Stay set (Complete ) PART D3 |
| 214 | H.T. Stay Insulator Type-C PART D3 |
| 215 | 7/10 SWG Stay Wire PART D3 |
| 216 | GI Nut , Bolt & Washer of different sizes PART D3 |
| 217 | 2. Civil, erection & survey worksFixing of complete Stay Set with all accessories and civil works PART D3 |
| 218 | Concreting of Pole @ 1:1.5:3(M-20 Grade) PART D3 |
| 219 | Couping of Pole @ 1:1.5:3(M-20 Grade) PART D3 |
| 220 | GIS Mapping, indexing/numbering of Poles PART D3 |
| 221 | Painting of Pole in Black & Yellow strips/Zebra PART D3 |
| 222 | PART D4: 11 KV pin points with WPB, 2 Km 55 sq.mm covered conductor, 40 Mtr span, 38 poles (Part D-4)1. Supply of materialsWPB (GI) Pole 160x152 11 Mtr. Long for SP PART D4 |
| 223 | 11 KV V cross Arm(GI) PART D4 |
| 224 | Top bracket 100x50X6 mm GI Channel(GI) PART D4 |
| 225 | Danger Plate PART D4 |
| 226 | Back Clamp for danger Plate and barbed wire PART D4 |
| 227 | GI barbed wire anticlimbing device PART D4 |
| 228 | 11 KV pin insulator polymer PART D4 |
| 229 | NON METALLIC TIES-11KV 55 SQMM CVRD AAAC PART D4 |
| 230 | Spike (GI ) ( 2 Nos of spike per Set in each Pole ) PART D4 |
| 231 | Earthing of Support ( Coil Type ) PART D4 |
| 232 | GI Nut , Bolt & Washer of different sizes PART D4 |
| 233 | 55 SQ.MM. AAAC XLPE Covered Conductor PART D4 |
| 234 | Midspan Joint for 55 sq.mm AAAC XLPE Covered Conductor-11 kV PART D4 |
| 235 | 2. Civil, erection & survey worksConcreting of Pole @ 1:1.5:3(M-20 Grade) PART D4 |
| 236 | Couping of Pole @ 1:1.5:3(M-20 Grade) PART D4 |
| 237 | GIS Mapping, indexing/numbering of Poles PART D4 |
| 238 | Painting of Pole in Black & Yellow strips/Zebra PART D4 |
| 239 | GIS coordinate mapping, drawing preparation and submission of the same for New/Existing line PART D4 |
| 240 | PART E: Construction of 3Ph 6W LT line using 9 Mtr 300 Kg PSC poles with 4Cx35 (P)+1Cx35 (M)+1x16 (street light) AB cable - 4.21 Km (Part E)1. Supply of materials9 Mtr. long PSC Pole PART E |
| 241 | GI flat for danger plate and anticlimbing device PART E |
| 242 | LT Stay set Complete PART E |
| 243 | 7/12 SWG GI stay wire, Grade -2 PART E |
| 244 | LT stay Clamp PART E |
| 245 | LT Stay insulator PART E |
| 246 | Pole clamp for EYE hook for (XLPE Aerial bunched Cable) PART E |
| 247 | EYE hook for XLPE Aerial bunched Cable PART E |
| 248 | Dead End Clamp suitable for messenger XLPE Aerial bunched Cable PART E |
| 249 | Suspension Clamp with EYE hook for ABC PART E |
| 250 | 4C×35 mm² (P)+1C×35 mm²(M)+1CX16 mm²(Street Light) (LT AB Cable) PART E |
| 251 | Insulated piercing connector.Type-B-main 25 to 150 sq.mm & Tap-6 to 35 sq.mm PART E |
| 252 | GI Pipe Earthing (each 5th pole to earth) PART E |
| 253 | Coil Earthing PART E |
| 254 | Danger plate (LT) PART E |
| 255 | GI barbed wire anticlimbing device PART E |
| 256 | GI Nut , Bolt & Washer of different sizes PART E |
| 257 | 2. Civil, erection & survey worksFixing of complete Stay Set with all accessories and civil works PART E |
| 258 | Concreting of Pole @ 1:1.5:3(M-20 Grade) PART E |
| 259 | Construction of Earthing chamber incuding earthing pipe and civil works PART E |
| 260 | Painting of Pole in Black & Yellow strips/Zebra PART E |
| 261 | GIS Mapping, indexing/numbering of Poles PART E |
| 262 | GIS coordinate mapping, drawing preparation and submission of the same for New/Existing line PART E |
| 263 | PART F: Construction of protecting guarding on double pole for road crossing - 1 No (Part F)1. Supply of materialsGI Channel, angle & flat of different size PART F |
| 264 | No-10 GI wire for lacing PART F |
| 265 | No-8 GI wire for guard wire PART F |
| 266 | Gi Pipe Earthing 40mm. 3 Mtr. Long PART F |
| 267 | Construction of Earthing chamber incuding earthing pipe and civil works PART F |
| 268 | PART G: Construction of protecting guarding on single pole for road crossing - 8 Nos (Part G)1. Supply of materialsGI Channel, angle & flat of different size PART G |
| 269 | No-10 GI wire for lacing PART G |
| 270 | No-8 GI wire for guard wire PART G |
| 271 | Gi Pipe Earthing 40mm. 3 Mtr. Long PART G |
| 272 | 2. Civil, erection & survey worksConstruction of Earthing chamber incuding earthing pipe and civil works PART G |
| 273 | PART H: Dismantling of materials (Part H)1. Dismantling worksDismantling of 09/11 Mtr. Joist/WPB Pole-116X100mm PART H |
| 274 | Dismantling of 9mtr PSC Pole PART H |
| 275 | Dismantling of existing 11/0.4kV, 33/0.4KV, Three Phase Distribution Transformer 25KVA including removal of HT/LT leads, earth connections and unloading by crane if required PART H |
| 276 | Dismantling of existing 11/0.4kV, 33/0.4KV, Three Phase Distribution Transformer 63KVA including removal of HT/LT leads, earth connections and unloading by crane if required PART H |
| 277 | Dismantling of existing 11/0.4kV, 33/0.4KV, Three Phase Distribution Transformer below 100KVA including removal of HT/LT leads, earth connections and unloading by crane if required PART H |
| 278 | Dismantling of ACSR/AAAC 34/55mm2 from overhead line PART H |
| 279 | Dismantling of various size of LT AB Cable PART H |
| 280 | PART I: Installation of 10 Mtr PSC pole for LT road crossing (Part I)1. Supply of materialsPSC POLE 10 METER LONG 330 KG. for DP PART I |
| 281 | GI flat for danger plate and anticlimbing device PART I |
| 282 | LT Stay set Complete PART I |
| 283 | 7/12 SWG GI stay wire, Grade -2 PART I |
| 284 | LT stay Clamp PART I |
| 285 | LT Stay insulator PART I |
| 286 | Pole clamp for EYE hook for (XLPE Aerial bunched Cable) PART I |
| 287 | EYE hook for XLPE Aerial bunched Cable PART I |
| 288 | Dead End Clamp suitable for messenger XLPE Aerial bunched Cable PART I |
| 289 | Suspension Clamp with EYE hook for ABC PART I |
| 290 | Insulated piercing connector.Type-B-main 25 to 150 sq.mm & Tap-6 to 35 sq.mm PART I |
| 291 | GI Pipe Earthing (each 5th pole to earth) PART I |
| 292 | Coil Earthing PART I |
| 293 | Danger plate (LT) PART I |
| 294 | GI barbed wire anticlimbing device PART I |
| 295 | GI Nut , Bolt & Washer of different sizes PART I |
| 296 | 2. Civil, erection & survey worksFixing of complete Stay Set with all accessories and civil works PART I |
| 297 | Concreting of Pole @ 1:1.5:3(M-20 Grade) PART I |
| 298 | Construction of Earthing chamber incuding earthing pipe and civil works PART I |
| 299 | Painting of Pole in Black & Yellow strips/Zebra PART I |
| 300 | GIS Mapping, indexing/numbering of Poles PART I |
| 301 | GIS coordinate mapping, drawing preparation and submission of the same for New/Existing line PART I. N:B: Salvage value to be deducted from the contractor's bill. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysDec 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender