Tender For Provn Of Shed At Arm Proving Area At Dsa, Ladies Toilet In Unit At Various Lacations, Flame Proof Light And Exhaust Fan With Complete Electrical Wiring With Connection At Various Pol Store And Addn/Altn To Iron Tower Posts In Tech Area At
Tender Overview
Project Description
Tender for Provn Of Shed At Arm Proving Area At Dsa, Ladies Toilet In Unit At Various Lacations, Flame Proof Light And Exhaust Fan With Complete Electrical Wiring With Connection At Various Pol Store And Addn/Altn To Iron Tower Posts In Tech Area At Af Stn Utarlai
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of Brickwork of stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles |
| 2 | Excavating over area , n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out hard/dense soil complete all directed |
| 3 | Excavation in trenches n.exc 1.50 mtr wide and n.exc 1.5 mtr depth for foundation as for manholes, pier holes etc. and getting out in hard/dense soil complete. |
| 4 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm |
| 5 | Removing excavated material soil to a distance n.exc 50 m and deposited where directed at a level not exceeding 1.5 m above the starting point |
| 6 | M&L PCC 1:4:8 type D-2(40mm graded aggregate) in foundation , sub base, filling and mass concrete and post holes complete all as specified. |
| 7 | M & L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter complete all as specified and directed. |
| 8 | M & L for RCC M-25 DESIGN MIX (20mm graded stone aggregate) as in foundations, including beams, plinth beams, bases for columns etc, basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 9 | M & L for RCC M-30 DESIGN MIX (20mm graded stone aggregate) as in foundations, including beams, plinth beams, bases for columns etc, basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 10 | M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as soecified and directed |
| 11 | M&L for RCC M-25 DESIGN MIX (20 mm graded stone aggregate) as in Columns, pillars, piers, posts and struts complete all as soecified and directed |
| 12 | M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete alll as specifed & directed . |
| 13 | M&L for RCC M-25 DESIGN MIX (20 mm graded stone aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete alll as specifed & directed . |
| 14 | M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specifed & directed . |
| 15 | M&L for RCC M-25 DESIGN MIX (20 mm graded stone aggregate) as in slab, complete alll as specifed & directed . |
| 16 | M & L TMT bars 10mm dia and over, cut to length bent to shape required incl crancking , bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conf to TMT bar complete all as specified. |
| 17 | M & L TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length bent to shape required incl crancking , bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified. |
| 18 | M&L sand filling under floor on in foundation in layers not exceeding 25cm each layer including watering and well ramming complete all as specified. |
| 19 | M&L for broken stone or boulder of Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified. |
| 20 | M&L for 40 mm thick Cement concrete type B- 2, 1:2:4 (40mm graded aggregate) as in floor finished even and smooth complete all as specified and directed. |
| 21 | M & L for block masonry with solid pre-cast cement concrete blocks made out of cement concrete 1: 3: 6 type C-1, using 20 mm graded crushed stone aggregate, exc. 10 cm in width and setting in cement mortar 1 : 6 complete all as specified and directed |
| 22 | M&L for Screed bed or bedding layer of mortar 15 mm thick CM 1:6 for laying floor finishes complete all as specified and directed |
| 23 | M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed |
| 24 | M&L for Screed bed or bedding layer of mortar 10 mm thick CM 1:4 for wall surface complete all as specified and directed |
| 25 | M&L for Glazed ceramic tiles (300x450mm) x 7mm thick, as in skirting /dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed |
| 26 | M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete |
| 27 | M&L for rendering 10mm thick in CM 1:4 on stone concrete including finish even and smooth surfaces without using extra cement complete all as specified. |
| 28 | M&L for rendering 5 mm thick in CM 1:3 on stone concrete including finish even and smooth surfaces without using extra cement complete all as specified. |
| 29 | M & L Rendering 15mm thick on fair faces brick surfaces in cement mortar 1 : 4 finished even and smooth without using extra cement complete all as specified. |
| 30 | M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of all weather coat paint , over a coat of primer complete all as specified and as directed. |
| 31 | M&L for preparation of new plastered or unplastered surfaces of ceilings and applying three coats of white wash, over a coat of chalk whiting complete all as specified and as directed. |
| 32 | M&L for preparation of new treated steel surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer in camouflage pattern complete all as specified and directed |
| 33 | M&L for preparation of old treated steel surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint in camouflage pattern complete all as specified and directed |
| 34 | M&L for applying roof treatment on top of roof with APP modified membrane with non woven polyester reinforcement (centre core) shall be laid by torch application method with overlap 100mm on length side and 100mm on width side including a coat of bituminious oil based primer ( IS : 3884) @ 250gm / Sqm weight not less than 3 kg/Sqm complete all as specified and directed |
| 35 | M&L for rendering 10mm thick in cement mortar (1:4) on concrete surface as on roof slab, finished even and smooth without using extra cement mix with water proofing compound as per manufacturer instruction complete all as specified and directed |
| 36 | S&F Steel ventilators with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded |
| 37 | S&F Steel ventilators with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded |
| 38 | S & F 30 mm thick (style thickness) factory made solid panel PVC door shutter consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall be covered with heat moulded single side prelam PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and single side prelam PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, paneling of both side prelam PVC sheet to be fitted in the mild steel frame welded / sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement as per specification and drawing given on MES schedule Part – II (2010) complete all as specified and directed. |
| 39 | S & F factory made solid PVC door frame of size 50 mm X 47 mm made out of 5 mm thick single side prelam PVC sheet reinforced with mild steel square tube and edges will be painted to match with prelam sheet as per specification and drawing given on MES schedule Part – II (2010) complete all as specified and directed. |
| 40 | S&F 200mm long Aluminium anodised, barrel tower bolts of extruded section , complete all as specified |
| 41 | S&F 100 mm long Butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed. |
| 42 | S&F 150 mm long Aluminium handles, cast type, anodised , complete all as specified and directed. |
| 43 | S&F 4 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane, complete all as specified and directed. |
| 44 | S &F Vitreous China wash down water closet pan western)pattern), white (excluding fixing bolts, flushing cistern and flush pipe), complete all as specified and directed. |
| 45 | S & F polymer white (polypropylene Delrin and ABS) low level flushing cistern 10 litre capacity valve less, syphonic action type, complete with inlet, ball valve, float valve, bends, brackets, flush pipe, brass screws, handle etc complete having BIS description mark with IS: 7231 including taking down of existing low or high level flushing cistern any capacity and S & F of 32 mm dia PVC flush pipe suitable length and making all connection and making good disturbed surface complete all as specified and directed. |
| 46 | S & F brass chromium plated standard quality jet system suitable forsemi-pedestal pattern (Anglo-Indian Type) water closet, complete complete all as specified and directed |
| 47 | S & F vitreous china wash hand basins white counter top ,to be fixed over granite by suitable fixtures and fittings complete all as specified |
| 48 | M*L for Granite (of any type) use in WHB counter top and similar work 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete |
| 49 | S & F 600mm x 450mm beveled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed to wall with wooden plugs with chromium plated brass screw and cap washers complete all as specified and directed. |
| 50 | S & F chromium plated fancy type15 mm bore dia bib tap , screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 51 | S & F 15 mm bore dia fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated ,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified and directed. |
| 52 | S & F 15 mm bore dia fancy type cromium plated Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed |
| 53 | S & F 15 mm bore dia fancy type cromium plated health faucet , cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed |
| 54 | S & F urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms), complete all as specified and directed. |
| 55 | S & F 450 mm long PVC connection with two brass nuts chromium plated internally threaded and PVC washer suitable for 15 mm bore pipe line complete all as specified and directed. |
| 56 | S&F stain less grating 100 mm dia , complete all as specified and as directed. |
| 57 | S & F in paper rol holder satainless steel of standard size complete all as specified and directed. |
| 58 | S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position with lid cover all as specified in SSR Part I capacity 500 ltr |
| 59 | S&F 25 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm - 690 gms) complete all as specified |
| 60 | S & F 20 mm bore steel water tubing medium grade galvanised with and including all fittings and fixed to walls and ceilings or laid under floors complete all as specified and directed. |
| 61 | S & F 15 mm bore steel water tubing medium grade galvanised with and including all fittings and fixed to walls and ceilings or laid under floors complete all as specified and directed. |
| 62 | S & F 25 mm bore steel water tubing medium grade galvanised with and including all fittings and fixed to walls and ceilings or laid under floors /trencs complete all as specified and directed. |
| 63 | S&F 110 mm bore UPVC pipe including all fittings laid down on floors by proper sealing and connecting to traps/ bends/tee etc complete all as specified and directed . |
| 64 | S&F 75 mm bore UPVC floor trap etc complete all as specified and directed . |
| 65 | S&F 75 mm bore UPVC bend/tee etc complete all as specified and directed . |
| 66 | S&F 100 mm bore UPVC S trap etc complete all as specified and directed . |
| 67 | S & F RCC NP-III 200 mm pipes single soaketed , in any length with required joints, laid in trenches or in floors. |
| 68 | Plain cement concrete 1:3:6 Type C-2 (using 40mm graded crushed stone aggregate) as in bed to drain pipes including packing under and hunching against the sides of pipes after they are laid and tested for 200 mm bore RCC NP-III pipe complete all as specified. |
| 69 | M & L for block masonry with solid pre-cast cement concrete blocks made out of cement concrete 1: 3: 6 type C-1, using 20 mm graded crushed stone aggregate, exc. 10 cm in width and setting in cement mortar 1 : 4 complete all as specified and directed |
| 70 | M&L for 15 mm thick rendering on fare faces of stone masonry surface in cement mortor 1:4 including finishing the surface even and smooth without using extra cement including mixing of liquid water proofing compound as per manufacturer instructions (WPC shall be measured and paid separately) complete all as specified. |
| 71 | M&L for plain cement concrete (1:2:4) type B-O (using 12.5 mm graded crushed stone aggregates) as in benching, copings, bed plates and the like including necessary form work and finishing all exposed surfaces of concrete all as specified and shown on drawing. |
| 72 | M&L for pre- cast reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregates) as in manholes cover slab etc, set in cement mortar 1:6 all as specified and shown on drawing. |
| 73 | M&L for Mild steel deformed or twisted bars 8 mm dia, cut to length, bent to shape required including cranking, bending spirally for hoping for columns, hooking ends and binding with and including mild steel wir (annealed) not less than 0.90 mm dia complete. |
| 74 | Supply only internal water proofing compound |
| 75 | M&L for Excavating in post holes (or similar holes) soft/loose soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed. |
| 76 | Surface excavation in soft/loose soil n.exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting out completer all as specified and a sdirected by Engineer-in-Charge |
| 77 | M&L Cement concrete type D-2 1:4:8 (40mm grade aggregate) 100mm thick as in sub base |
| 78 | M&L Machine pressed precast concrete interlocking paver block any shape and with grey ciment no pigment and 60 mm thick & ends to be closed with PCC 1:2:4 type B-2 (Using 40mm graded stone aggregate) as site reqd to filling the gaps between tiles and road edgs complete all specified and directed. Confirning to IS 15658-2006 of 60 mm thickness, M-35 Grade. |
| 79 | M&L for Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 10.16.1 Hot finished welded type tubes |
| 80 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and MS sheets and similar work conforming to Fe.290.Gde-E-16 complete all as specified and directed by Eng -in-charge |
| 81 | Dismantling of old wooden planks by removing screws/nails along with old rusted MS sheet over wooden planks and removing out from MOD land |
| 82 | S&F wooden planks 50 mm thick made of seasum wood , properly kiln seasoned to be fitted with screws and fasteners and to be prepared with one coat of primer and two coats of synethtic enamel paints complete all as specified and directed. |
| 83 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 12.1.1 0.63 mm thick with zinc coating not less than 275 gm/m². complete all as directed and specified . |
| 84 | M&L for preparation of old treated steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint in camouflage pattern complete all as specified and directed |
| 85 | M&L for Point wiring concealed type with PVC insulated and unsheathed multistranded FRLSH copper conductor single core 1.5 Sqmm (nominal area) cable using approved colour code as per IS drawing in and incl concealed PVC conduit (ISI Mark) of required size with all accessories including providing modular steel terminal boxes off size made out of 1.5mm thick MS sheet providing suitable size mounting plates complete accessories for mounting of modular switch/sockets alongwith copper earth wire PVC insulated & unsheathed multistranded (FRLSH) copper conductor cable of size 1.5 Sqmm as continous earth wire connected to common earth and earth dolly complete all as specified. |
| 86 | One light point controlled by one way switch 6/5 Amp . |
| 87 | One Ceiling Fan / Exhaust point controlled by one way switch 6/5 Amp . |
| 88 | One 3 pin socket outlet 6/5 Amps on the same board with other switches. |
| 89 | One 3 pin 6/5 Amp socket outlet controlled by one switch on independent board. |
| 90 | S&F switch piano flush modular type, single pole, one way 6/5 Amp, 240 Volts complete all as specified & directed. |
| 91 | S&F modular socket multipurpose 5 pin, 6/5 Amp piano flush type, 240 Volts complete all as specified & directed. |
| 92 | S&F modular switch piano flush type,single pole, one way 16/15 Amp, 240 Volts complete all as specified & directed. |
| 93 | S&F modular socket 2 in 1, 3 pin, 16/15 Amp flush type, 240 Volts complete all as specified & directed. |
| 94 | S&F ceiling rose, surface bakelite, three terminals complete all as specified & directed. |
| 95 | M&L Point wiring of Power point concealed type contolled by one 15 Amp switch independent with PVC insulated and unsheathed multistranded FRLSH copper conductor single core 2.5 Sqmm (nominal area) cable using approved colour code as per IS drawing in and incl concealed PVC conduit (ISI Mark) of required size with all accessories including providing modular steel terminal boxes off size made out of 1.5mm thick MS sheet duly painted with black bitumen paint over a coat of red oxide primer and providing suitable size mounting plates complete accessories for mounting of modular switch/sockets alongwith copper earth wire PVC insulated & unsheathed multistranded (FRLSH) copper conductor cable of size 2.5 Sqmm as continous earth wire connected to common earth and erth dolly complete all as specified and as directed. |
| 96 | S&F LED tube light fitting 4' long, 18/20 Watt single phase 230 V with illumination efficiency more than 120 Lumen/Watt, 3000K/6000K, decorative tuneable white browse slim ultra bright LED polycarbonate tube fixture with extruded heat shrink, environmental friendly energy efficientwith very high efficiency to give glare free light at light source incl integrated electronic driver complete all as specified and directed. |
| 97 | S&F mirror light fitting 2' long, 8/10 Watt single phase 230 V with illumination efficiency more than 120 Lumen/Watt, 3000K/6000K, decorative tuneable white browse through slim ultra bright LED polycarbonate tube fixture with extruded heat shrink, environmental friendly energy efficientwith very high efficiency to give glare free light at light source incl integrated electronic driver complete all as specified and directed. |
| 98 | S&F LED building security light 25 Watt, 230 V new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 with high power LEDs as light source with electronic driver and connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable including brackets complete all as specified and directed. |
| 99 | M&L for sub main wiring with 2x4 sqmm PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 4.0 sqmm (Nominal area) drawn through in and including PVC Conduit concealed type of suitable size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 4.0 sqmm as earth lead and connected to earth dolly including cutting chases in brick/block/stone wall wherever necessary, replastering and making good to match with existing surfaces complete all as specified and directed.NOTE: (a)Two run of cable with one run of earth wire and one run of conduit ISI Marked will be measured as one length. (b) Unit rate includes for cutting chases for cunduits and sunken boxes and making good. |
| 100 | Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables(Heavy Duty) 1100 volts grade with stranded aluminium conductor of size 6 sqmm 2 core |
| 101 | Supply,laying and testing cable XLPE Insulated, screened, PVC bedded,Galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 sqmm 2 core. |
| 102 | Supply and laying Double wall corrugated HDPE duct pipe 45mm outer dia confirming to IS: 16205 of approved colour with fittings for strip protection laid in trenches etc complete all as specified and directed. |
| 103 | Material and labour for clean dry tibba sand in trenches/ducts for cushoning to cable complete all as specified. (Punned thickness shall be measured & paid) |
| 104 | M&L for sub main wiring with 2x1.5 sqmm PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn through in and including PVC surface Conduit type of suitable size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly complete all as specified and directed.NOTE: (a)Two run of cable with one run of earth wire and one run of conduit ISI Marked will be measured as one length. |
| 105 | S&F MCB DB CRCA sheet powder coated SPN 4 way double door factory made suitable for incorporating MCB as out going connecting incoming and outgoing cables and flush to wall by making the hole in the wall and fixing the DB with cement work and plastering to match with existing surfaces complete all as specified and as directed. |
| 106 | S&F MCB SPN having braking capacity 10 KA, 35 to 60 Amp, 240 volts 'C' curve complete all as specified and as directed. |
| 107 | S&F MCB single pole having braking capacity 10 KA, 6 to 32 Amps 240 volts 'C' curve complete all as specified and as directed. |
| 108 | S&F Exhaust fan of size 380mm sweep ventilator square/ round , iron/steel body heavy duty with louver single phase suitable for 230 volts 50 Hz and connecting up complete including provision of 3 core flexible cord cable of size 0.5 from ceiling rose to connector of fan including cutting hole in existing brick/block/stone wall for providing suitable opening on wall and fixing on existing wall with fixing arrangements and making good disturbed surfaces complete all as specified and directed. |
| 109 | S&F for Water Heater storage type (Geyser) vertical/horizontal type as per site requirement with inner container of capacity 50 ltrs glass line tank, Electrically operated AC 230 Volts BEE 5 Star rated ISI marked including 4 Nos of hold fashner nuts required suitable size fixed in bric wall, all necessary electrical and water supply connections with PVC connection pipe hot & cold complete all as specified and as directed. |
| 110 | S&F Single pole and neutral enclosure with 2 pin earth industrial plug and socket with one MCB SPN 20 AMPs including cutting chases in brick/block/stone wall wherever necessary, replastering and making good to match with existing surfaces & fixing the same complete all as specified and directed. |
| 111 | S&F Bronze gate valve for 25mm bore pipe, with iron wheel head, screwed both ends for iron pipe and fixed, ISI marked conforming to IS 778 : 1984, complete all as specified and directed. |
| 112 | M&L for taping of 25mm water pipeline from existing pipeline 50/80mm including fitting & fixture complete all as specified and directed. |
| 113 | Earthing complete with galvanised steel earth electrode plate of size 600x600x6mm thick, buried directly in ground (earth pit nbot less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50m below notmal ground level, connected to galvanised earth lead wire 4.0mm dia by means of suitable GI nuts/bolts and brazing/welding properly up to main board including earth pit in cement concrete 1:2:4 type B-1, MS sheet pit cover of checked plate 6mm having angle iron frame 25x25x3 with suitable handle, excavation and earth work in any type of soil and including medium grade GI watering pipe 25mm bore with funnel wire mesh and medium grade GI wire protection pipe 25mm bore up to main board complete as shown in electrical plate No 3 of MES schedule Part-I 2009, connected to earthing testing pointcomplete all as specified and testing on completion complete all as specified and as directed. Note:- The units rate including the cost of excavation & earth work in any type of soil, charcoal & salt in alternate layers, 25mm GI pipe (light grade) for watering 25mm GI protection pipe (light grade) funnel wire mesh PCC chamber in PCC 1:3:6 type C-1 cast iron frame and MS cover made out of 6mm thick checkered plate hinged both end for open & close for pit etc & no extra payment will be made. |
| 114 | M&L Point wiring for flame proof light point controlled by one switch with 1100 volts grade 1.5 sqmm PVC insulated unsheathed FRLS multistranded copper conductor cable as per IE colour code for phase /neutral /earthing wire drawn into and including rigid in stove enamelled mild steel ERW conduit medium grade minimum 20mm dia and accessories concealed/surface in walls/roof/floors with continuous 1.5 sqmm PVC insulated unsheathed FRLS multistranded copper conductor cable as earth continuity conductor and connecting to common earth dolly complete including cutting chases in brick/ block/stone masonry wall , replastering and making good to match the existing surfaces complete all as directed. |
| 115 | Supply and fixing FLP/WP switch 16 Amp, 250V single pole ON/OFF rotary type with termination box in LM6 all as specified and directed by Engr-in-Charge. |
| 116 | Supply and fixing LED light fitting 1x16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size. |
| 117 | S&F flame proof Exhaust 12'' 0.25 HP, single phase recommended for gas/vapour group of IIA &IIB and zone 1&2, die cast aluminium housing with heat resistant toughened glass IP 65 protection, constant current LED driver, prewired with all accessories complete fitting including making holes. |
| 118 | S&F flameproof SPN DB 4 way enclosure size :420 x 480 x 250 mm, lightining distribution panel , incoming :-MCB SPN,40 Amp-1 No, Outgoing ;-MCB,1P,5 to 32 Amp-2 Noswith complete internal bus bar & wiring up to terminals All as specified and directed by Engineer -In-Charge. Please Enable Macros to View BoQ information |
| 119 | S&F flameproof SPN DB 4 way enclosure size :420 x 480 x 250 mm, lightining distribution panel , incoming :-MCB SPN,40 Amp-1 No, Outgoing ;-MCB,1P,5 to 32 Amp-2 Noswith complete internal bus bar & wiring up to terminals All as specified and directed by Engineer -In-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 22 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender