Tender For Repair/ Maintenance Of Misc E/M Nature Work In Navy Area Under Ge New Delhi
Tender Value
39.99 Lakhs
Estimated cost
Bid Submission
09 Dec 2026
18 days left
EMD
79980
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Maintenance Of Misc E/M Nature Work In Navy Area Under Ge New Delhi
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : GE NEW DELHI Name of Work: REPAIR/ MAINT OF MISC E/M NATURE WORK IN NAVY AREA UNDER GE NEW DELHI Contract No: GE/ND-74/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Rates only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sch. itemNo. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | S&F in replacement of LED ceiling decorative light, surface COB LED Ceiling lights with round head & double diffuser combination for creating beautiful pattern from light, combination of aluminium housing and Borosil Glass cover in Shinny copper finish. Fixture must comply with IEC-60598 Fixture should have min as per existed at site. fixture should be suitable for 1 x 3W max. E27 lamp with CCT 3000K complete all as specified and directed by Engineer in charge.Make : Lusture cat part No LI-30031-3 or equivalent in Philips/ Trilux /Jaquar |
| 3 | S&F in replacement of Bed side lamp having classic Striker range of wall light in Chrome with fabric white shade suitable for 1x40W Striker Lamp complete all as specified and directed.Make : Phillips Cat Part No. 581876, Lustre Cat Part No LI-3604/1W or equivalent in Havells/Jaquar/Lusture |
| 4 | S&F in replacment of Table lamp having E27 lamp Base, and size 1x20W Max complete all as specified and directed.Make : Phillips Cat Part No: 581877 or equivalent in Havells/Jaquar |
| 5 | S&F in replacment 1200 mm sweep Decorative BLDC Ceiling fan with premium wood finish, with remote, BLDC motor, 230 volts having full copper motor & ribbed aluminium or High grade ABS blade for higher air delivery, having min CMM >240, 5 star energy rating, powder coating providing longer life complete with accessories including making arragement to hanging of fan to ceiling with proper hook nut bolts complete all as specified and directed.Make : Havells Cat Part No Stealth Air BLDC wood, Orient Cat Part No Aeroquiet Neu BLDC Pro, Atomberg Cat Part No Aris Starlight Smart. Note. (i) Colour will be approved by the competent authority.Note: Old unsv ceiling fan will be deposited in MES store yard in safe custody of Engr in charge. |
| 6 | S&F in replacement of Chandelier fixture in Elegant titanium gold and matt black finish with premium crystals offering sparkling illumination of size Dia. 600 x H 1850 (E14 lamp base with 7x 40W Max) complete all as specified and directed.Make : Phillips Cat Part No: 581965 Naica Pendant MSS Titanium Gold Black, Lusture cat part No LI-3605/6LP or equivalent in Orient/ Wipro/ Crompton/ Jaquar |
| 7 | Supply, installation, testing and commissioning in replacement of 150mm dia ductable ventilation/exhaust fan incuding louvers, suitable for washroom/toilet, with hight performance motor, air delivery minimum 240 CMH, low noise operation, back-draft shutter, complete with PVC flexible /rigid duct, fasteners, electrical connection and all accessories. The rate includes making proper arrangement for fixing i.e. cutting bricks/ stone boulders of appropriate size and finishing the surface with cement work and matching paint finishes complete all as specified and directed.Make : Orient Ventro 150mm, Cromption Brisk Air Neo, Havells Ventil Air DX Neo.Note: Cost of flexible PVC duct of length upto 5 meter and its connection are deemed to be included in this rate. Noting extra to be paid on this account.Note: Old unsv exhaust fan will be deposited in MES store yard in safe custody of Engr in charge. |
| 8 | S&F in replacement of submain wiring with PVC insulated unsheathed copper conductor multi stranded FRLS type 1100V grade 2 x 4 sqmm complete drawn in new PVC concealed conduit and its accessories along with 1x 4 sqmm PVC insulated unsheathed copper conductor multi stranded FRLS type cable for continuous earth wire and duly connected to common earth dolly complete all as specified and directed.Make: RR KABEL/ Polycab/ Havells |
| 9 | S&F in replacement of flexible LED Strip light fixures of length 5mtr roll. Strip must have PCB of suitable size, DC 12 Volt, 13.8W/meter, having minimum 26 Lm/LED, IP 20 rating, having colour WW+W function with remore controlled . Luminous efficacy /mtr should be min 100lm/W. Color consistency ≤3 & Lifetime (ta 25 C) @L70 to be 30,000hrs, & IK03 protection complete all as specified and directed. Make: Philips/ Lumos Vision/ Havells/Lustre Note : Cost of M&L including T&P required for Cutting of ceiling, inserting of profile/fixing of profile and other necessary work required to make LED strip light fully funcitonal are deemed to be included in this rate. Nothing extra shall be paid on this account. |
| 10 | S&F in replacement of Aluminium profile of approximate size is 23mm x 15mm or as desired by Engineer-in-Charge including diffuser of required length complete all as specifed and directed. |
| 11 | S&F in replacement of LED Driver suitable for LED strip light of sizes mentioned above including other required fixures materials deemed to be included in this item rate. The Driver includes constant voltage LED strip controller, type RGB, operated at DC 12/24V, output 10 Ampere maximum, power 120W, suitable to working in temperature between 45 degree C to 90 degree C complete all as specified and directed.Make : Philips/ Lumos Vision/ Havells/ Lustre |
| 12 | S&F in replacement of 10-12 Watt LED bollard light warm white made of premium quality material in IP -65 Protection, fully weather proof, LED integrated, anti rust anti dust, perfectly suitable for ambiance creation and beautiful light pattern light, input voltage 220-240 Volt, 50 HZ, low power warm white LED including suitable nut bolt, foundation of size 300mmX300mmX450mm cement concrete (1:2:4) type B1 (20mm stone aggregate) to fix the light including excavation and earth work complete all as specified and directed by Engr-In-Charge.Make: Philips Cat part No 582091/ Lustre Cat Part No Li-80016-10(LIBLF-10)/ Homdec Cat Pat No HL-2345A |
| 13 | Supply, laying and testing cable XLPE insulated, screened,PVC bedded, galvanized steel strip or wire armoured electric power cable 1100 Volts grade with stranded aluminium conductor of size 10 Sqmm X 2 core including taking down old unsv cable complete all as specified and directed.Make : Havells /Polycab /KEI /RR Kabel |
| 14 | S&F in replacement of high-quality LED recessed uplighter with inbuilt DMX decoder having system wattage not exceeding 36W (±2W). The product shall have RGBW (≤4 SDCM) light output & must be DMX 512 controlled, The housing should be made of Piece pressure die-cast aluminum & Frame should be of Stainless Steel Ring with High quality temper glass cover min 12mm with PC lens secondry optics. The luminaire shall have declared Lifetime of 50K hours@L70. The Ingress protection should be minimum IP67 & impact resistance shall be IK10. The Luminaire should have a minimum AC: L to N: 1kV, L to ground &N to ground: 2kV surge protection. The driver shall have operating voltage of 110V to 240V, PF≥0.90 @full load, Working Temperature Range -40℃ to +50℃ & product beam angle shall be 20°. The luminaire Working Temp. range should be from 0⁰ to 50⁰C. Power Connection single flying cable 30cm+/-5cm and single IP68 connector, PG13.5 gland, H05RN-F 3*1mm2. fixture must be CB/EMC/CE/CCC certified including necessary connection with electric supply complete all as specified and directed.Make : Philips/ Regent/ Osram |
| 15 | Supply, installation, testing and commissioning in replacement of 1000mm long rigid architectural RGBW (W=4000K) LED Linear light having housing of Extruded aluminium alloy 6063 grade & die-cast aluminium end caps. The luminaire shall have electrostatically applied polyester powder coating finish. The luminaire width shall be 38mm & height of 47mm without brackets. The luminaire’s integrated brackets shall be made of extruded aluminium & the same shall be so designed that the luminaire can be tilted ±95°. The luminaire shall have silicon glue between optical cover & LED chamber to ensure proper IP66 protection. The nominal weight of the luminaire shall be 1.55KG (±10%). The luminaire shall be equipped with high-power Cree, osram, lumiled or equivalent. The fixture shall have 25°X40° beam angle & the lens shall be made of anti-aging & anti UV-PMMA material. The optical cover shall be made of IK06 rated clear tempered glass. The LEDs shall have minimum CRI ≥80 & shall have SDCM≤4. The fixture shall come with power & DMX cable of minimum 100mm length. The fixtures shall be installed with have IP67 connectors. The luminaire shall have system wattage not exceeding 24W and system lumen output of not less than 800 lumens. Fixture shall operating temperature range of -40°C to 50°C. The fixture shall have a non-integral driver with input voltage of 24V DC. The luminaire shall have declared life of 50,000 burning hours at L70 @ 35deg. The luminaire shall have class I insulation. The luminaire shall be compatible with DMX512 controller. The luminaire shall automatically addressable using hand-held addressing device. The luminaire shall be capable of 8-bit control of RED, Green, Blue & White (W=4000K) to produce 16.7million colours. The luminaire shall be capable of digital dimming of 65536 steps complete all as specified and directed by Engr in charge.Make: Signify (Philips) or equivalent in iGuzzini/ Linealite/ Martin/ Lusture |
| 16 | Supply, installation, testing and commissioning in replacement of Supply of architectural RGBW (W=4000K) LED flood light with integral driver & housing made ofextruded Al with Die-cast aluminium end caps. The luminaire shall be have min dimension 155 X 140X149 (±10%) with bracket. The luminaire shall have electrostatically applied polyester powder coating finish. The luminaire bracket shall be made of cold-rolled steel & shall be so designed that the luminaire can be tilted to ±90°. The bracket shall have locking mechanism to fix & secure the desired tilt angle. The luminaire shall have silicon gasket between optical cover & LED chamber to ensure proper IP66 protection. The luminaire must have a breather gland. The luminaire shall be equipped with high-power LED's from Cree, osram, lumiled makes only. The fixture shall have 10° beam angle (±10%) & the lens shall be made of anti-aging & anti UV-PMMA material. The optical cover shall be made of IK06 rated clear tempered glass. The LEDs shall have minimum CRI ≥80 for white light & shall have SDCM≤4. The fixture shall come with power & DMX cable of minimum 100mm length. The fixtures shall be installed with have IP67 connectors. The luminaire shall have system wattage not exceeding 24W and system lumen output of not less than 1200 lumens. Fixture shall operating temperature range of -10°C to 50°C. The fixture shall have an integral driver with input voltage for 220-240 VAC, 50/60Hz. The luminaire shall have declared life of 50,000 burning hours at L70 @ 35deg. The luminaire shall have class I insulation. The luminaire shall be compatible with DMX512 controller. The luminaire shall automatically addressable using hand-held addressing device. The luminaire shall give feedback on luminaire address & status (ON & Off). The luminaire shall be capable of 8-bit control of RED, Green, Blue & White (W=4000K) to produce 16.7million colours. The luminaire shall be capable of digital dimming of 65536 steps complete all as specified and directed.Make: Signify (Philips) or equivalent in iGuzzini/ Linealite/ Martin/ We-ef |
| 17 | S&F in replacement of DMX decoder complete all as specified and directed by Engr in charge.Make : Signify (Philips) or equivalent in Linealite/ Martin/ Lustre |
| 18 | S&F in replacement of ZGC 301 IP connector (10Bags) complete all as specified and directed.Make : Signify (Philips) or equivalent in Linealite/Martin/Lustre |
| 19 | Supply, installation, testing and commissioning in replacement of RDM-6Wall Splitter & Booster, should be able to provide 6-output DMX/RDM splitter with DMX/RDM pass-through supporting bi-directional communications for discovery, addressing and DMX control of Ethernet/DMX products. This unit takes the incoming DMX/RDM signal and splits the signal into six separate output channels allowing for expanding the number of devices controlled from 32 to 6x32. The output terminals are electronically isolated from the input & RDM-through port and share a common ground reference. All six output ports have an independent output driver to boost the DMX/RDM signal. Surface or DIN-rail mountable,Isolated DMX/RDM Input/Outputs, Automatic switching between DMX and RDM mode for auto-discovery, Environment-IP20, Interior applications, Finish/Color-Polycarbonate complete all as specified and directed.Make: Signify (Philips) or equivalent in iGuzzini/ Linealite/ Martin/ We-ef |
| 20 | S&F in replacement of 4P DMX leader cable for connecting luminaire with power supply having length min 2m length (min 10 nos in 1 packet) complete all as specified and directed.Make : Signify (Philips) or equivalent in Linealite/Martin/Lustre |
| 21 | S&F in replacement of endcap male connector (pack of 20 pcs) complete all as specified and directed.Make : Signify (Philips) or equivalent in Linealite/Martin/Lustre |
| 22 | S&F in replacement of endcap female connector (pack of 20 pcs) complete all as specified and directed.Make : Signify (Philips) or equivalent in Linealite/Martin/Lustre |
| 23 | S&F in replacement of 5P DC/DMX leader cable for connecting luminaire with power supply having length min 2m length (min 10 nos in 1 packet) complete all as specified and directed.Make: Signify (Philips)/ iGuzzini/ Linealite/ Martin/ We -ef. |
| 24 | S&F in replacement of 5P DC/DMX jumper cable for interconnecting the façade luminaires having length min 2m length (min 10 nos in 1 packet) complete all as specified and directed.Make : Signify (Philips) or equivalent in Linealite/Martin/Lustre |
| 25 | Supplying, installation, testing and commissioning in replacement of LT panel 3.15 mm thick cubical outdoor type weather proof, totally enclosed with IP 65 protection made out of CRCA sheet angle iron of size 50 mm x 50 mm x 6 mm suitable for 3 phase, 4 wire ,440 volts, 50 Hz including cable glands, phase indicators, internal wiring,CT of suitable Ratio, voltmeter, ammeter, air passing holes with proper spacing to accommodate to all control switches and other accessories, cable connections with suitable size of lugs/thimble etc and locking arrangement with two locks godown type welded inside of the shutter with duplicate keys, spray painting with two coats of light gray paint over a coat of red oxide primer and mounted on two No bricks pillars including excavation and earth work complete PCC (1:2:4) brick work (1:4) and plastering complete all as specified and directed.Incoming:-(a) MCB TPN 40 Amps Pole,- 01 No(b) Power contactor- 32 Amps- 03 Nos(c) Surge protection device- 01 No(d) RYB Indicating lamp(e) Digital Voltmeter and ammeter of suitable rating(f) Start/stop Push Button-1 No(g) Over voltage/under voltage relay-01 NoOutgoing:-(a) MCB SP 06-32 Amps - 10 Nos |
| 26 | Supply, installation, testing and commissioning in replacement of single phase voltager stabilizer of capacity 05 KVA,Minimum input voltage 90-130V, minimum output voltage 130V, maximum output voltage 290-300 Volts including digital display, digital indicators, over volt protection and overload protection complete all as specified and directed by Engr-in-Charge.Make : V Guard/ Bluebird /Microtek /Servotech /Luminous power |
| 27 | M&L for Earthing complete with galvanized steel earth plate 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate n.less than 1.5 m below normal ground level, connected to galvanized iron wire 4 mm as earthing lead by means of bolts, nuts, check nuts & washers of galvanized iron or steel besides building at all joints as shown in drgs and including excavation and earth work, GI pipe light grade 25mm bore of protection of GI wire from earth electrode, supply and laying charcoal dust, common salt, PCC (1:2:4) type B-1 Chamber and MS angle iron frame 40x40x3mm and RCC cover 40 mm thick (1:2:4) type B-1using 20 mm graded stone aggregate Reinforced with 6 mm dia round bars @ 75 mm C/C both ways with MS handle 12 mm dia , PGI funnel and wire mesh , 20 mm dia GI Pipe light grade for watering including taking out old earthing materials complete all as specified and directed by Engr-in-Charge. |
| 28 | S&F in replacement Recessed mounting 36 Watt 2'x2' full glow essential LED panel fitting luminaire with high transmitive diffuser suitable for indoor space and fix in existing POP including cutting/grouting of existing POP and get electrically connected the fitting with switch board for suitable size of PVC copper wire complete all as specified and directed.Make : Crompton/Bajaj/Havells/Wipro/Philips/Osram/Usha/Orient |
| 29 | S&F in replacement of 1x4 fullglow recess mounted LED panel light of 36 W luminaire with high transmitive diffuser suitable for indoor space complete all as specified and directed.Make : Crompton/Bajaj/Havells/Wipro/Philips/Osram/Usha/Orient |
| 30 | S&F in replacement of ARCHNER LED type post top light 45 watts, pressure cast aluminium PU painted housing with casted aluminium heat sink with optical grade PC diffuser, IP- 65 protection, input voltage 140-270 Volt, 50 HZ , low power white LEDs with 50000 Burning hours, better heat dissipation,high efficient constant current electronic driver provided with high high voltage,open and short circuit protection,external surge protection 10 KV etc complete suitable for 76 mm outer dia pole including flexible 3 core 1.5 sqmm copper connecting cable from box to fitting etc complete all as specified and directed by Engr-In-Charge.Make: Bajaj Cat pt No BGCPNP 45 W LED WW or equivalent in Havells/Philips/Lustre. |
| 31 | M&L for supply, erection, testing & commissioning of 3.0 metre hight, top dia 76mm,bottom dia 114mm made out of 3 mm thick galvanized steel sheet hot dip octagonal post top light pole with one ERW welding joint including window/door opening at 600mm above ground level with one MCB SP 6 Amps & TPN connector block 32 Amps (door size 300mm X 80 mm) having flash cover including necessary earth work (excavation, returning filling & removal) in soft/loose soil, RCC (grade M20) in foundation as per recommended design of manufacturer considering safe soil bearing capacity at site including suitable size & minimum 04 Nos foundation bolts of minimum dia 16 mm & 450 mm long \\"J\\"-type alongwith nuts, washers, anchor plates and templates, 50 mm dia PVC pipe in foundation for entering cable and taking down of old U/S post top pole any height/type complete all as specified and directed. The foundation details shall be as under:-(a) RCC foundation size below GL will be 300 mm x 300 mm x 600 mm (depth) (minimum) and above GL shall be 300 mm high of same section.(b) Main reinforcement in RCC shall be 20 mm dia 8 Nos TMT steel bars in vertical and stirrups of 8 mm dia @ 190 mm c/c.(c) Base plate and anchoring plate shall be of minimum size 200 x 200 x 10 mm thick.(d) RCC (grade M20) in foundation.Make: Bajaj Cat Part No. BJPL-03 or equivalent in Havells/Philips/Lustre. |
| 32 | Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured electric power cable 1100 Volts grade with stranded aluminium conductor of size 16 Sqmm X 4 core including taking down old unsv cable complete all as specified and directed.Make : Havells /Polycab /KEI /RR Kabel |
| 33 | S&F in replacement of LED 4ft Functional Batten with 20W with a nominal system lumen output of 4100 lumens and a minimum system efficacy of 120 lm/W. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70. The luminaire should have a color temperature of 6500K and CRI>80. The luminaire shall meet IP20 rating with THD < 10% and PF > 0.95. The luminaire housing should made of Extrusion alu with high efficieny Diffuser complete all as specified and directed.Make: Crompton Cat Part No TCS-111-40-65-HL2-DP-NWH or equivalent in Havells / Philips /Orient |
| 34 | S&F in replacement of 20W Track mounted light suitable for general lighting with Adjustment angle of pane angle: 0 -320; tilt angle : 0- 90. Luminaire should have die cast heat sink with polycarbonate lense optics. The luminaire should have CRI > 90/SDCM ≤3 and CCT of 3000K/4000K. The luminaire shall be compliant with IP20 classification.The fixture should have a minimum system efficacy of 87 lumen/Watt and a minimum system lumen output of 1930lm lumens. The luminaire shall be designed so as to ensure lumen depreciation of up to 30% over 50k burning hours @ design ambient temp 45 deg C. The electronic driver used shall have a power factor >0.95 , THD <10%. Luminare Operating Temp should be -15 Degrees to 45 Degrees & Input Voltage Range to be 140-270V with Driver Efficiency min 85% & Surge protection of 2.5 KV. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters along with technical data sheets of product complete all as specified and directed by Engr in charge.Make: Philips Cat Part No True Fashion Projector ST700T LED20 930PC PSU or equivalent of Trilux/ Endo |
| 35 | S&F in replacement of decorative wall mounted light with elongated round head & fixed arm, metalic housing in Bronze finish with Premium glass for reduced glare white shade. Fixture should have min Dimensions (mm) 200x140x380. fixture should be suitable for 1 x 20W max. E27 lamp with CCT 3000K complete all as specified and directed.Make: Philips Cat Part No 31434 Wall Light or equivalent of Trilux/ Endo |
| 36 | S&F in replacement of wall mounted light Mirror/picture Light, metalic housing in Metal & Aluminum Housing in bronze finish with Flexible neck for adjusting beam & Superior bronze finish. Fixture should have min Dimensions (mm) L= 500 mm W= 80mm H= 95mm. fixture should be integral type suitable for 1 x12W LED in lamp with CCT 3000K. Fixure must comply to IEC 60598-1, IS 10322 (Part5/Sec1). System delivered lumen 420lm & surge protection of Min. 2.5KV with WIDE VOLTAGE PROTECTION Range of : 160V-360V complete all as specified and directed.Make: Philips Cat Part No 31403 Muziris 12W Picture Light or equivalent of Trilux/ Endo |
| 37 | S&F in replacement of decorative wall mounted light with 2X round head, metalic housing in White & Black finish in glass & glossy finish. Fixture should have min Dimensions (mm) 286x166x180mm. fixture should be suitable for 2x20W max. E27 lamp with CCT 3000K complete all as specified and directed.Make: Philips Cat Part No 31458 or equivalent of Trilux/ Endo |
| 38 | S&F in replacement of 13.5 W recessed mounted downlighter suitable for general lighting. Luminaire should have die cast heat sink with deep inset polycarbonate diffuser. The luminaire should have CRI > 80 and CCT of 3000K/4000K. The luminaire shall be compliant with IP20 classification.The fixture should have a minimum system efficacy of 110 lumen/Watt and a minimum system lumen output of 2000 lumens. The luminaire shall be designed so as to ensure lumen depreciation of up to 30% over 50k burning hours @ design ambient temp 45 deg C. The electronic driver used shall have a power factor >0.95 , THD <10%. Luminare Operating Temp should be 0 Degrees to 45 Degrees & Input Voltage Range to be 140-270V with Driver Efficiency min 85% & Surge protection of 2.5 KV. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters along with technical data sheets of product complete all as specified and directed.Make: Philips Cat Part No Green perform Sleek DN296C LED20S or equivalent of Trilux/ Endo |
| 39 | S&F in replacement of surface/suspended type slim linear LED light fitting 35-40 watt ,140-270 Volt, 50HZ, made of CRCA with high transmitivity diffuser of PC, THD<=10% and PF >= 0.95 and surge protection of 4 KV, fixture must have LV/HV protection including necessary wire for its connection complete all as specified and directed.Make: Philips Cat Part No SP095V LED40S or equivalent of make as specified in PS. |
| 40 | S&F in replacement of aesthetically designed ceiling/surface circular shaped decorative LED downlighter round shape of 15 W PDC housing for enhanced life and continuous operation complete all as specified and directed.Make : Philips/Havells/Crompton/Orient |
| 41 | S&F in replacement of aesthetically designed ceiling/surface circular shaped decorative LED downlighter square shape of 15 W PDC housing for enhanced life and continuous operation complete all as specified and directed.Make : Philips/Havells/Crompton/Orient |
| 42 | S&F in replacement of aesthetically designed ceiling/surface circular shaped decorative LED downlighter round shape of 12 W PDC housing for enhanced life and continuous operation complete all as specified and directed.Make : Philips/Havells/Crompton/Orient |
| 43 | S&F in replacement of aesthetically designed ceiling/surface circular shaped decorative LED downlighter round shape of 09 W PDC housing for enhanced life and continuous operation complete all as specified and directed.Make : Philips/Havells/Crompton/Orient |
| 44 | S&F in replacement Recessed mounting 30 Watt 2'x2' full glow essential LED panel fitting luminaire with high transmitive diffuser suitable for indoor space and fix in existing POP including cutting/grouting of existing POP and get electrically connected the fitting with switch board for suitable size of PVC copper wire complete all as specified and directed.Make : Crompton/Bajaj/Havells/Wipro/Philips/Osram/Usha/Orient |
| 45 | Supply, installation, testing & commissioning in replacement of remote controlled BEE 5 star rated BLDC Ceiling Fan of 1400 mm sweep, with remote, having minimum air delivery of 260 CMM, operating at 230 volts, 50 Hz, power factor not less than 0.9, insulation resistance greater than 1.5 mega ohm, having full copper motor & powder coated ribbed aluminium blades for higher air delivery, longer life complete with all the accessories including making arrangement to hanging of fan to ceiling with proper hook, nut, bolts, safety pin & remote stand, complete all as specified and directed by Engineer-in-Charge.Make: Atomberg Efficio model No EFC21435RM or equivalent in Havells, Crompton, Bajaj, Orient, Polycab, Superfan, Anchor having minimum CMM 260.Note: Old unsv ceiling fan will be submitted in MES store yard in safe custody of Engr in charge. |
| 46 | S&F in replacement of LED flood light luminaires 90 watts, 230 volts AC, outdoor type with pressure diecast housing resistant to impact and corrosion, glare free complete with lamp, driver complete all as specified and directed.Make : Crompton/Bajaj/Havells/Wipro/Philips/Lustre |
| 47 | S&F in replacement of LED flood light luminaires 50 watts, 230 volts AC, outdoor type with pressure diecast housing resistant to impact and corrosion, glare free complete with lamp, driver complete all as specified and directed.Make : Crompton/Bajaj/Havells/Wipro/Philips/Lustre |
| 48 | S&F in replacement Recessed mounting 60 Watt 2'x2' LED panel fitting suitable for grid ceiling with 100% indirect lighting,delivering soft and uniform light for excellent visual comfort fix in existing POP including cutting/grouting of existing POP and get electrically connected the fitting with switch board for suitable size of PVC copper wire complete all as specified and directed.Make :Crompton/Bajaj/Havells/Wipro/Philips/Osram/Orient/UshaNote: (a) Srl Item No 01.00, 04.00, 06.00, 08.00, 11.00 to 15.00, 18.00, 24.00 to 31.00, 33.00 to 36.00, 38.00 & 43.00 to 47.00 of BOQ are major items for the subject tender and material in respect of these items shall be procured within one month after placing of work order and produced before Engg in Charge alongwith original purchase vouchers as per direction of Garrison Engineer and shall obtain a certificate from Engg in charge that material in respect of above mentioned items have been submitted in the office of Engg in charge in their safe custody. Purchase vouchers of subject items shall be produce during technical check of payment.(b) Materials in respect of Freakishly low declared items if any at the time of acceptance of contract shall be procured within one month after placing of work order and submit the same in the office of Engg in charge alongwith original purchase vouchers in their safe custody and shall obtain a certificate from Engg in charge. Purchase vouchers of subject items shall be produce during technical check of payment. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysDec 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender