Defence Statutory Bodies & Commissions/Committees Closing in 27 days TDR #58645709

Tender For Provn Of Modern Storage Sheds And Allied Works For Coy Asc (Sup) At Barrackpore Under Ge Barrackpore

Issued by Statutory Bodies & Commissions/Committees · 24 Paraganas North, West Bengal
Tender Value
7.45 Crore
Estimated cost
Bid Submission
19 Dec 2026
27 days left
EMD
6.97 Lakhs
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
24 Paraganas North → West Bengal
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Provn Of Modern Storage Sheds And Allied Works For Coy Asc (Sup) At Barrackpore Under Ge Barrackpore

BOQ

Name of Work:- PROVN OF MODERN STORAGE SHEDS AND ALLIED WORKS FOR COY ASC (SUP) AT BARRACKPORE UNDER GE BARRACKPORE
Sl. No. Item Description
1Note:-1. The bidders/contractors are advised to read tender document & all Corrigendum /ammendments and General Condition of Contracts before entry/quoting the rates. 2. It is highlighted that the certain condition of General Condition of Contracts (IAFW-2249) has been modified as per direction of MoD i.e. inclusssion of Performance Security, deletion of Risk & Cost Provisions and increase in defect liability period all as per tender documents. The tenderers should keep in mind while quoting their offer. NOTE (Applicable for all items/parts):- The bidders/contractors are advised to refer Notes on BOQ/SCH'A' before entry/quoting the rates. Lumpsum price workedout by the tenderer for BUILDINGS WORKS as listed in Schedule ‘A’ Part-I. (A) [Design and Construction of Building]
2Design and Construction of PEB structure storage shed of external size of 37.850m X 30.00m for 400 MT capacity with prefabricated, painted steel structure, GI purlins, GI side runner, Foundation bolts and other items related to shed along with 0.53mm thick galvalume sheet with aluminium zinc 150gm/Sqm for roof and wall. Polycarbonate sheet and accessories including Erection of PEB steel structure, fixing of roof and wall sheets along with accessorieswith following are included:- (a) Height of shed 6.00m at side and 7.50m at centre. (b) Plinth height of shed is 1.00m above MUGL. Earth filling to be carried out and flooring of the shed to be PQC. The design/ thickness of PQC, DLC, GSB WMM, etc. whichever required to be laid / carried out as per load calculation & 'K' value obtained to be submitted and get approval from HQ CEKZ. (c) 02 Nos Motorized Rolling shutter of size 5.50m X 4.00m. (d) Roofing - Colour coated galvalume sheet of thickness 0.53mm. (e) Turbo ventilator as per requirement. (f) Wall cladding- Using pre-painted metal profiled sheet 0.53mm thick.
3(g) Inside Bldg- Oil hydrogenated room of size 5.00m X 4.00m X 3.00m with 0.90m high glazed wall tiles. (RCC framed structure & Brick wall). (h) Inside Bldg.- Fumigation chamber of size 5.00m X 4.00m X 3.00m. (Roof & wall PEB structure). (RCC framed structure & Brick wall). (j) Wall- 0.90m height brick wall all around including inside 02 Nos room oil hydrogenated & Fumigation chamber. (k) Door - 03 Nos Wooden door double shutter with fly proof shutter of size 1.50m X 2.10m. (l) Window- Powder coated AI three way track sliding window with 5.50mm thick ordinary sheet glaas for two shutter and SS wire mesh for one shutter with MS grill. Location of windows as per drg. (m) 2.0m wide platform of bldg length 37.85m for loading of Ration. (n) Load on floor- Approx 50 Tonne vehicle to be entered inside bldg. (o) Point wiring for light, fan, exhaust fan and security lights with switch socket combination, etc. complete all as specified and all as directed.
4Design and Construction of PEB structure storage shed of external size of 30.00m X 19.00m for 200 MT capacity with prefabricated, painted steel structure, GI purlins, GI side runner, Foundation bolts and other items related to shed along with 0.53mm thick galvalume sheet with aluminium zinc 150gm/Sqm for roof and wall. Polycarbonate sheet and accessories including Erection of PEB steel structure, fixing of roof and wall sheets along with accessorieswith following are included:- (a) Height of shed 6.00m at side and 7.50m at centre. (b) Plinth height of shed is 1.00m above MUGL. Earth filling to be carried out and flooring of the shed to be PQC. The design/ thickness of PQC, DLC, GSB, WMM, etc. whichever required to be laid / carried out as per load calculation & 'K' value obtained to be submitted and get approval from HQ CEKZ. (c) 02 Nos Motorized Rolling shutter of size 5.50m X 4.00m. (d) Roofing - Colour coated galvalume sheet of thickness 0.53mm. (e) False Ceiling. (f) Wall cladding- Using pre-painted metal profiled sheet 0.53mm thick. (g) Inside Bldg- Oil hydrogenated room of size 5.00m X 4.00m X 3.00m with 0.90m high glazed wall tiles. (RCC framed structure & Brick wall).
5(h) Inside Bldg.- Fumigation chamber of size 5.00m X 4.00m X 3.00m. (RCC framed structure & Brick wall). (j) Wall- 0.90m height brick wall all around including inside 02 Nos room oil hydrogenated & Fumigation chamber.(RCC framed structure & Brick wall) (k) Door - 03 Nos Wooden door double shutter with fly proof shutter of size 1.50m X 2.10m. (l) Window- Powder coated AI three way track sliding window with 5.50mm thick ordinary sheet glaas for two shutter and SS wire mesh for one shutter with MS grill. Location of windows as per drg. (m) 2.0m wide platform of bldg length 19.00m for loading of Ration. (n) Load on floor- Approx 50 Tonne vehicle to be entered inside bldg. Point wiring for light, fan, exhaust fan and security lights with switch socket combination, etc. complete all as specified and all as directed. (Note for Item No. 1.01 & 1.03:- Rate quoted shall deemed to be included the cost of Designing and vetting of design of PEB structure by IITs/ NITs. The design (Showing the full calculation and details) vetted by IITs/ NITs to be submitted to the department as per time schedule.)
6Construction of RCC foundation for storage shed of size 37.85m x 30.00m for 400 MT capacity and size 30.00m x 19.00mm for 200 MT capacity excavation in soft loose soil, PCC 1:4:8 in fdn, pile foundation in RCC M-25, Built brick work all around 0.90m height in CM 1:6 seismic Zone IV, External plaster in CM 1:4 with weather coat paint and internal plaster in CM 1:6 with oil bound distemper (height of wall 0.90m aabove finish floor level) Complete all as specified and all as shown on drawing.
7Lumpsum price workedout by the tenderer for SITE CLEARENCE, AREA DEVELOPMENT, EARTH WORK & EXCAVATION as listed in Schedule ‘A’ Part-II.
8Lumpsum price workedout by the tenderer for INTERNAL ELECTRIFICATION as listed in Schedule ‘A’ Part-III.
9Lumpsum price workedout by the tenderer for HARD STANDING as listed in Schedule ‘A’ Part-IV.
10Lumpsum price workedout by the tenderer for COVERED SHED as listed in Schedule ‘A’ Part-V.
11Lumpsum price workedout by the tenderer for AREA DRAINAGE as listed in Schedule ‘A’ Part-VI.
12Lumpsum price workedout by the tenderer for EXTERNAL ELECTRIC SUPPLY as listed in Schedule ‘A’ Part-VII.
13Lumpsum price workedout by the tenderer for DEMOLITION/ DISMANTLING as listed in Schedule ‘A’ Part-VIII.
14Sch 'A' Part-IX (MISC ITEMS) Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as \\"Rs 0.00\\" under Col. 5 siginifies this fact only.COMMON ITEM FOR ALL SCHEDULE
15Supply and fixing of octagonal steel pole of 6.00m height, taper type with top dia 70mm and bottom dia 130mm factory made with 3mm thick sheet including base plate of size 200mm x 200mm x 12mm and 4 Nos bolts of size 20mm dia and 600mm length complete with single armed bracket of length 1.00m complete all as specified and as directed.
16Supply, installation and testing of analog type time line distribution board of 16 Amps, 3 pole, 230 volts with analog time switch having 100 hours batter backup 1 module type complete all as specified and as directed.
17Supply, fabricated and fixing of street light bracket made out of GI pipe 32mm dia medium grade bent to shape of 2.40 mtr long suitable for street light fittings as directed including clamps made out of 30 mm x 6 mm thick -02 Nos flat iron for fixing bracket suitable for PCC/steel poles/on wall surfaces including nuts and bolts, washers and other connected items of required size including painting with two coats of aluminium paint over a coat of red oxide primer complete all as specified and directed.
18Supply, fabricated and fixing of flood light bracket made out of GI pipe 25mm dia medium grade bent to shape of 1.50 mtr long suitable for street light fittings as directed including clamps made out of 25 mm x 6 mm thick -02 Nos flat iron for fixing bracket suitable for PCC/steel poles/on wall surfaces including nuts and bolts, washers and other connected items of required size including painting with two coats of aluminium paint over a coat of red oxide primer complete all as specified and directed.
19Supply, installation, testing and commissioning LT Feeder panel of size 1200mm x 1200mm x 500mm, 3 phase, 4 wire, 415 volts, AC, 50 Hz indoor type floor mounted, free standing, dust and vermin, proof, air ventilation made out of 3.5mm thick CRCA sheet and suitable sized angle iron and flat duly powder coated and any manufacturer shall be followed CPRI norms and as approved by GE. Panel shall have front opening, locking arrangements, cable alleys, bus bar chamber and switch gear compartment, hinged door with rubber gasket, bottom cable entry holes for incomming and out going cables, earthing terminals, including civil work/ PCC foundation (PCC 1:2:4 type B1) as per site requirement complete all as specified and directed including comprising of following:-Incoming:-(a) MCCB 200Amps, 4 pole, 36KA,415 volts,50Hz- 01 No.Outcoming:- (a) MCCB 100Amps, 4 pole, 25KA, 415 volts,50Hz- 01 No.(b) MCCB 63Amps, 4 pole, 25KA, 415 volts,50Hz- 03 Nos.(c) 1 Spare compartment for future expansion metering & indicating instruments. (d) Volt meter digital type 0-415 volts with Selector Swtich - 01 Set. (e) Ammeter digital type 0-400 Amp with CTs 200/5 - 03 Nos and Selector Swtich - 01 Set. (f) Current transformer (CT) 200/5A (Set of 3 Pcs) (g) Insulators, wiring, bus bar sleeves, lugs, glantd, sheet metal enclosure etc. including complete wiring with suitable size of copper wire. (Note:- The contractor shall be submit the drawings (General& circuit lay out drawings ) for approval by the Garrison Engineer before procurement) Please Enable Macros to View BoQ information
20Supply, installation, testing and commissioning LT Feeder panel of size 1200mm x 1200mm x 500mm, 3 phase, 4 wire, 415 volts, AC, 50 Hz indoor type floor mounted, free standing, dust and vermin, proof, air ventilation made out of 3.5mm thick CRCA sheet and suitable sized angle iron and flat duly powder coated and any manufacturer shall be followed CPRI norms and as approved by GE. Panel shall have front opening, locking arrangements, cable alleys, bus bar chamber and switch gear compartment, hinged door with rubber gasket, bottom cable entry holes for incomming and out going cables, earthing terminals, including civil work/ PCC foundation (PCC 1:2:4 type B1) as per site requirement complete all as specified and directed including comprising of following:-Incoming:-(a) MCCB 200Amps, 4 pole, 36KA,415 volts,50Hz- 01 No.Outcoming:- (a) MCCB 100Amps, 4 pole, 25KA, 415 volts,50Hz- 01 No.(b) MCCB 63Amps, 4 pole, 25KA, 415 volts,50Hz- 03 Nos.(c) 1 Spare compartment for future expansion metering & indicating instruments. (d) Volt meter digital type 0-415 volts with Selector Swtich - 01 Set. (e) Ammeter digital type 0-400 Amp with CTs 200/5 - 03 Nos and Selector Swtich - 01 Set. (f) Current transformer (CT) 200/5A (Set of 3 Pcs) (g) Insulators, wiring, bus bar sleeves, lugs, glantd, sheet metal enclosure etc. including complete wiring with suitable size of copper wire. (Note:- The contractor shall be submit the drawings (General& circuit lay out drawings ) for approval by the Garrison Engineer before procurement) Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58645709
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 7.45 Crore
LAST DATE 19-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Provn Of Modern Storage Sheds And Allied Works For Coy Asc (Sup) At Barrackpore Under Ge Barrackpore
Basic Detail
Tender No 89135/E8
Bidding Type Tender
Location
City 24 Paraganas North
State West Bengal
Key Dates
Publish Date 20 Nov 2026
Submission Date 19 Dec 2026
Open Date 26 Dec 2026
Finance
Tender Value 7.45 Crore
Tender Fee 3000
EMD 6.97 Lakhs
Exemption Available
Document List
BOQ_897284.xls
DRAWING_FOR_MODERN_STORAG_1.rar
fb4b2e09-f15c-4fed-b369-25886617bf71.html
Tenderdocuments89135.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 20, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 19, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 27 days
Dec 26, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 34 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_897284.xls

rar

DRAWING_FOR_MODERN_STORAG_1.rar

html

fb4b2e09-f15c-4fed-b369-25886617bf71.html

pdf

Tenderdocuments89135.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender