Defence Statutory Bodies & Commissions/Committees Closing in 17 days TDR #58645707

Tender For Addn/ Altn To Ladies And Gents Toilet Of Swimming Pool And Provn Of Parking Shed For Pilot Vehicle At Chanakyabagh Under Ge New Delhi

Issued by Statutory Bodies & Commissions/Committees · New Delhi, Delhi
Tender Value
38.47 Lakhs
Estimated cost
Bid Submission
09 Dec 2026
17 days left
EMD
76945
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Addn/ Altn To Ladies And Gents Toilet Of Swimming Pool And Provn Of Parking Shed For Pilot Vehicle At Chanakyabagh Under Ge New Delhi

BOQ

Name of Work:- ADDN/ ALTN TO LADIES AND GENTS TOILET OF SWIMMING POOL AND PROVN OF PARKING SHED FOR PILOT VEHICLE AT CHANAKYABAGH UNDER GE NEW DELHI
Sl. No. Item Description
1Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : GE NEW DELHI Name of Work: ADDN/ ALTN TO LADIES AND GENTS TOILET OF SWIMMING POOL AND PROVN OF PARKING SHED FOR PILOT VEHICLE AT CHANAKYABAGH UNDER GE NEW DELHI Contract No: GE/ND-75/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Rates only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sch. itemNo. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words
2B&R PORTION:Dismantlling floor, hearth or wall tiling including cement mortar aany thickness bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
3S&F Dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone as required shape and size fixed with three nos SS clamps (grade-202) of flat-30mm X 3mm , making C or U groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment over 20mm thick cement screed in CM 1:4,set and jointed in cement mortar 1:3 and pointed in cement mixed with approved pigment to match the colour of the stone complete all as specified and directed.Note- Rates are included Before fixing of stone polished grainding and after
4M&L for 25mm thick cement concrete type B-0,1:2:4 (12.5mm graded aggregate) as in sub bsae floor/roof complete all as specified and directed.
5M&L for 12mm thick toughned glass door end seal and fixed with stainless steel floor springs, 2nos of stainless steel handle 600mm long fancy type in each shutter fixed to glass door, heatching/flim of approved design on the glass complete all as specified and directed.Note: Floor spring and handles measured and paid separately as supply only here in after
6Supply only 32 mm dia 600 mm long handle suitable for glass door complete all as specified and directed.
7Supply only Stainless steel body and internal machanism heavy duty concealed floor spring suitable for 12mm thick glass door 1.1 mtr span fixed on tiles or granite surface complete all as specified and directed.
8S&F stainless steel body centre locking arragement suitable for glass door complete all as specified and directed.
9M&L for Non skid joint less coloured tiles 10mm thick area of each tile exceeding 0.36 sqm but not exceeding 0.74 sqm(1200X600mm) in floors set and pointed in white or coloured type 2T adhesive to match over incl Master bond OBL-315 Powerfix polymer modified adhesive with enhanced high bond polymers for fixing floor tiles Having classification C2TE accod to European norms as per IS 15477-2019 Type 2T adhesive of Orient or equivelent complete all as specified and directed by Engr in charge.Note: Size,Colour and pattern of tile as approved by EICMake: Kajaria, Somany, Johnsion
10M&L for Supper Glazed vitrified coloured tiles of 10 mm thick in glossy finish of size 2 x 4 feet (600 x 1200 mm) fixed in vertical surface with 10 mm thick backing layer of good quality tile adhesive (MYK Laticrete 325+ / Roff) (qty of water should be mix as per manufacturere's instruction) fix to wall incl cleaning work complete all as specified and directed.note: Colour and pattern of tile as approved by EIC and work to be execute through skilled labour using spacer Make :- Kajaria or equivalent in Somany /Johnson
11Taking up or down 15mm dia bore of galvanised Iron steel tubing and connections including cleaning for refixing or removing to store complete all as specified and directed.
12Taking up or down 20 mm dia bore of galvanised Iron steel tubing and connections including cleaning for refixing or removing to store complete all as specified and directed.
13Taking up or down 25 mm dia bore of galvanised Iron steel tubing and connections including cleaning for refixing or removing to store complete all as specified and directed.
14Supply and laying of 20mm dia CPVC pipes SDR 11 Fittings on walls /celings or laying in floors including cement solvent and all fittings complete all as specified and directed.
15Supply and laying of 25 mm dia CPVC pipes SDR 11 Fittings on walls /celings or laying in floors including cement solvent and all fittings complete all as specified and directed.
16Supply and laying of 32 mm dia CPVC pipes SDR 11 Fittings on walls /celings or laying in floors including cement solvent and all fittings complete all as specified and directed.
17S&F 20mm dia brass elbow complete all as specified and directed.
18S&F union 16/20mm complete all as specified and directed.
19S&F 20MM dia brass Tee complete all as specified and directed.
20S&F in repairs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 1000 Ltrs Incl making connection for inlet & outlet including 20mm/25mm Gun metal gate valve & Float valve complete all as specified and directed.Make : Sintex/Rotex/Polywell
21S&F in repair 15mm bore dia of Black Matt colour anglular stop cock with wall flange quarter turn full Antique including cover plate complete in all respect complete all as specified and directed by Engr-in-Charge. Make : Jaquar Cat Part No KUP-BLM-35053PM or equivalent inKohler/ Hans Grohe/ Villeroy and boch
22S&F in repair 15mm bore dia 2 way bib cock with wall flange with colour Black Matt Finish including cover plate complete in all respect complete all as specified and directed by Engr-in-Charge. Make :Jaquar Cat Part No KUP-BLM-35041PM or equivalent in Kohler/Hans Grohe/ Villeroy and boch
23S&F in repair 15mm bore dia Exposed part kit of single lever basin mixer wall mounted consisting of operating lever, cartridge sleeve, nipple & spout, with colour Black Matt finish (Jaguar Cat Part No KUP-BLM-35233NKPM) with concealed body for single lever basin mixer wall mounted Colour : Black Matt finish (Jaguar Cat Part No ALD-CHR-233N) incl all required accessories/ fixture to make operation complete in all respect complete all as specified and directed by Engr-in-Charge. Make : Jaquar Cat Part Nos mentioned above or equivalent in Kohler/Hans Grohe/ Villeroy and boch
24S&F in repair 32mm bore dia Bottle Trap Colour Black Matt Size with 300 mm & 190 mm Long wall connection pipes & wall flange with colour : Black Matt incl required concealed pipe upto trap with required accessories complete in all respect complete all as specified and directed. Make : Jaquar Cat Part No ALD-BLM-769L300X190 or equivalent in Kohler/Hans Grohe/ Villeroy and boch
25S&F 15mm bore dia Exposed part kit concealed stop cock & flush cock (Jaguar Cat Part No KUP-BLM-35083KPM) with fitting sleeve, Operating lever & Adjustable wall flange with seal, with colour Black Matt incl regular body of concealed stop cock Colour : Chrome (Jaguar Cat Part No ALD-CHR-083) suitable for 15 mm pipe line with protection cap complete in all respect complete all as specified and directed by Engr-in-Charge. Make : Jaquar Cat Part No as mentioned aboveor equivalent in Kohler/Hans Grohe/ Villeroy and boch
26S&F Antique Copper Robe Hook in Black Matt finish complete in all respect complete all as specified and directed by Engr-in-Charge. Make : Jaquar Cat Part No AQN-BLM-7791 or equivalent in Kohler/Hans Grohe/ Villeroy and boch
27S&F in repair Hand Shower (Health Faucet) with 8 mm dia, 1 meter long easy Flex Tube & wall hook with Colour : Black Matt with check nut and washers complete all as specified and directed.Make : Jaquar Cat Part No ALD-BLM-565 or equivalent in Kohler/Hans Grohe/ Villeroy and boch
28S&F in repair Toilet roll holder with stainless steel flap with Black Matt paper holder complete in all respect complete all as specified and directed by Engr-in-Charge. Make :Jaquar Cat Part No AKP-BLM-35753PS or equivalent in Kohler/Hans Grohe/ Villeroy and boch
29S&F Towel rack 600 mm long with Lower Hangers, Stainless Steel of Colour : Black Matt complete in all respect complete all as specified and directed by Engr-in-Charge.Make : Jaquar Cat Part No AKP-BLM-35781PS or equivalent in Kohler/Hans Grohe/ Villeroy and boch
30S&F in repairs floor mounted Rimless single piecse WC with UF soft close slim seat cover,hinges,dual flush,cistern fittings,fixing accessories set including tornado system size 360x690x750mm S trap-220mm connection to drain or (outgoing pipe) & to flushing pipe anti siphonage pipe etc complete in all respect complete all as specified and directed.Make: Jaquar- CAT Part No CNS-WHT-853S220UFSMN, or Equivalent in Kohler/ Hindware/ Cera
31S&F in repair Towel Towel ring Square of Colour : Black Matt complete in all respect complete all as specified and directed by Engr-in-Charge.Make : Jaquar Cat Part No AKP-BLM-35721P or equivalent in Kohler/Hans Grohe/ Villeroy and boch
32S&F in repair Under counter Basin with Fixing accessories,shape square size: 450x450x170mm Colour Black Matt modern design with Square shape, slim edges, with tap hole, anti bacterial glaze on ceramic, smooth glaze surface incl fixing on plateform with all required accessories/ fixtures complete in all respect complete all as specified and directed.Make: Jaquar Cat Part No LAS-BLM-91701or equivalent in Kohler/Hans Grohe/ Villeroy and boch
33S&F Soap Dispenser with glass bottle with Black Matt colour complete in all respect complete all as specified and directed by Engr-in-Charge. Make : Jaquar Cat Part No AKP-BLM-35735P or equivalent in Kohler/Hans Grohe/ Villeroy and boch
34S&F in repair Soap Dish Holder with Colour : Black Matt Finish complete in all respect complete all as specified and directed by Engr-in-Charge. Make : Jaquar Cat Part No AKP-BLM-35731PPD or equivalent in Kohler/Hans Grohe/ Villeroy and boch
35S&F in repair PVC connections 15mm size with PTMT steel nuts of length 450 mm complete all as specified and directed.Make : Jaquar / Kohler/ hindware/ Cera
36S&F in repair 6 mm thick looking mirror bevelled edge of selected quality glass of required shape and size with Black Matt Finish 1st class hard wood desiner beading frame made around, mounted on 6 mm thick commercial ply or AC building board fitted to wooden plug with Gold finish brass screws complete all as specified and directed.Make of glass :- Atul /Modi Float/ Saint Goabain.
37S&F in repair Aquamax Exposed part kit of Thermostatic shower mixer with 3-way diverter (Jaguar Cat Part No KUP-BLM-35683PM) with Colour : Black Matt, incl Kubix prime bath Spout with wall flange (Jaguar Cat Part No SPJ-BLM-35429PM), with Aquamax concealed body of thermostatic shower mixer with 3 way diverter (Jaguar Cat Part No ALD-CHR-683), Maze overhead Shower 200x200mm Square Shape Single Flow (Body & Face Plate Sttainless steel ) with rubit Cleaning Syatem (Jaguar Cat Part No OHS-BLM-1619) of colour : Black Matt, incl Maze Metal hand shower 90x90mm Square Shape single flow with rubit cleaning (Jaguar Cat Part No HSH-BLM-1655M) Colour : Black Matt, Over head Shower arm 400x25x25 mm Square Shape for wall mounted Showers with Flange (Jaguar Cat Part No SHA-BLM-455L400) Colour : Black Matt, Flexible tube for hand shower 8 mm dia & 1.5 M long with nuts (Jaguar Cat Part No SHA-BLM-549D8), wall outlet with shower hook in square shape (Jaguar Cat Part No SHA-BLM-566S) Colour: Black Matt, incl cover plate, adjusting leg, concealed diverter and all required accessories/ fixture complete in all respect complete all as specified and directed by EIC Make : Jaquar Cat Part Nos as mentioned above or equivalent in Kohler/Hans Grohe/ Villeroy and boch
38S&F in repairs corner shelf 304 x 304 mm size with 5mm thick toughened glass complete all as specified and directed.Make :Jaquar / Kohler/ Hindware
39Taking down chowkats or frames not exceeding 1.5 Sqm each with shutters (without taking off the shutter from the frame) complete all as specified and directed.
40Taking down chowkats or frames exc 1.5 sq. m but n exc 4 sqm but with shutters (without taking off shutters from the frame) complete all as specified and directed.
41S&F for factory made single extruded WPC (wood polymer composite) solid door/window/Ceosetory windows and other frames/chowkat of size 100mmx50 mm comprising of virgin PVC polymer of K value 50-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame dencity of 750kg/cum, screw withdrawl strength of 200N (Face and 1100N edge), minimum compressive strength of 58N/Sqmm and resistance to flame of class A category and property of being termite/borer proof, water/moiture proof and fire retardant and fixed with MS hold fasts/lugs/SS Dash fastener of required dia and length of complete all as specified and directed by Engr in charge.Note : For WPC solid door /windows frames, minus5mm tolerance in dimension ie depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made. Make- Rajshree/ Yashpoly/ Century
42S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws,complete all as specified and directed by Engineer In- Charge. Note: Hardware fittings fixtures shall be paid separatelyMake- Alstone/ Yashpoly/ Century
43S&F 200 mm Stainless Steel, barrel tower bolts of extruded section complete all as specified and directed.
44S&F 150 mm SS handles, fabricated type complete all as specified and directed.
45S&F Butt hinges in 100 mm Size, medium weight, Stainless steel, and fixed complete all as specified and directed..
46S&F Floor door stopper 140mm long of Stainless steel body and tongue, anodised with hard drawn steel spring complete all as specified and directed..
47S&F 300 mm long Stainless Steel, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.
48S&F in repair stainless steel drapery rod (curtain rod) of 25mm dia, wall thickness 1.00mm minimum, fancy type, complete all as specified and directed.
49S&F stainless steel decorative type bracket and side cups for curtain rods 25mm dia fixed with screws complete all as specified and directed.
50Dismantling loose concrete cover by chiselling from RCC columns, beams, slabs, chajjas, parapets, railing and the like as directed without disturbing the core of RCC member, roughening and cleaning concrete surfaces with steel wire brushes, washed with and allowed to dry, including application of rust removal cum passivator painted with brush to the rusted reinforcement (and removing rust with flex after 24hours of application of rust remover with the help of wire brush, sand paper) and steel scaffolding is provided and also applying zinc anti-rust agent as per manufactures method of application to re bar corrosion protection system to reinforcement surface of steel reinforcement with existing reinforcement as directed (Note- Including Rebar reinforcement of any dia as per requirement incl drilling, holing and welding to existing bars as directed) wherever required binding RCC 100mmx100mm (10 gauge welded mesh) & tack welding after that applying polymer modified cementious bonding coat, prepared and applied on the concrete surface with 1 part of sika latex or equivalent in Forsoc/BASF/Dr Sunanda with 4 part of water and 6 part of cement by weight, coverage of sika latex shall not be more than 0.25 Kg/Sqm for one coat. Adhesive bond strength not less that 2.5 mpa, After this, providing 40mm (average thickness) guiniting mix @ pressure 2.2 to 2.5 kg per sqcm with anti corrosion admixture (using 1 part of ordinary potland cement 43 grade and 2 part of Ghagger sand mixed with adhesive /admixture at the rate as per manufacturer instruction and as directed) including stripping floting with wooden strippers for proper dimension control necessary, formwork and scaffolding, complete surface of guiniting to be finished fair with 10mm thick plaster in cement 1:4 with water proofing compound @ 3% by weight of cement cleaning and removing of waste material etc complete all as specified and directed.Note: Welded mesh & addl reinforcement if required measured and paid separetlyNote :- Only steel scaffolding is allowed and rate included in above item. The work shall be carried out by enclosing affected area by green cloth
51S&F 18 mm thick 100 % Solid premium quality Action Tesa HDHMR base board pre laminated both side (of approved colour) having density more than 850 kg/cum, fixed with screws as in wall panel, storage cabinet/Vanities/ Cub board and built in modular tables etc, for hold of shelf / partation and shall provide 3 edges in sizes 18 mm x 18 mm as per required length. the edges of shelf / partation / wall side to be lipped with including 18 mm x 1 mm thick laminated sheet of density 850 kg/cum manufactured by as ISO -9000 certified company , lipping portion should be match with laminated colour, using solvent cement etc. (including all necessary brass hardware fitting i.e Soft closing hinges, Make : Atlantic / Lapo/ Hettich), handle, ball catchers including mortice locking arrangement, Make: Doorset / Godrej / Yale), hole cap including lipping etc, and Channel siliding rail in each Cup board/ Vanities complete all as specified and directed by Engr in charge.
52Dismantling of upto 100mm dia cast iron or reinforced concrete drain pipes, jointed in cement mortar complete all as specified and directed.
53S&F PVC (SWR) pipes 110mm bore single socketed, pressure rating 6 kg/cm2 in any length with rubber ring joints fixed to walls/floor complete all as specified and directed.
54S&F PVC (SWR) pipes 75mm bore single socketed, pressure rating 6 kg/cm2 in any length with rubber ring joints laid in trenches/wall complete all as specified and directed.
55S&F PVC (SWR) 110 mm tee bore junction single (door Single T) equal or unequal with access door any radius complete all as specified and directed.
56S&F PVC (SWR) 110mm bore bends any radius complete all as specified and directed.
57S&F PVC (SWR) 100 to 75 mm tee bore junction single (door Single T) equal or unequal with access door any radius complete all as specified and directed.
58S&F PVC (SWR) 75mm bore bends any radius complete all as specified and directed.
59S&F PVC (SWR) 150mm bore Door bends/Tee/bent any radius complete all as specified and directed.
60S&F PVC (SWR) 110mm bore vent cowl complete all as specified and directed.
61S&F uPVC ventilator with provision for exhaust fan, for ventilation in toilet with (openable type window / Fixed glass as per requirement) of frosted glass with uPVC frame of approved colour, thickness 60 mm, Length 750mm and height 600 mm complete all as specified and directed.
62S&F factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi- chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and incl provn of guard bars of 10 mm square MS bar as safety grill, necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, incl all required hardware fitments complete all as specified and directed by Engineer-in-Charge. Rate of 4.8mm Glass or wiremesh shall not be paid separately rate is included in the quoted rate and no seperate payment will be given for glass and wiremesh) (Rate of 10 mm square MS bar will be included in the quoted rate and no seperate payment will be given for guard bar) Make : Rajshri / Fenesta / EcocellNote: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
63Demolition of stone slabs and tiles of any description or thickness in floors/walls, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.
64M&L for 18 to 20 mm thick granite (of any type) (approved colour) machine cut as in vertical surfaces/ skirting, dado,riser of steps and like, jointed with grey cement slurry and pointed with white cement with admixture of of pigment to match the shade of granite stone incl grinding and polishing laid over and including 15 mm thick rendering in CM 1:4 complete all as specified and directed.
65M&L for 18 to 20mm thick granite (approved colour) machine cut in steps, jambs, pillars, window-cills, cooking plat-forms and like, bedded with 20mm screed bed in cement mortar 1:4 and jointed with grey cement slurry including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite stone including grinding, and polishing complete complete all as specified.
66M&L for Rounding to edges of stone slabs one edge, such as in steps, coking plateform and other similar situations complete all as specified and directed by Engr in charge.
67Taking down cement plaster on brick walls, raking out joints locking for key, scrubbing down with water etc complete all as specified and directed.
68M&L for ready mix plaster 10 mm thick cement plaster self-curing on internal surfaces fair face of brick or concrete surfaces of walls,,beams,column, etc and similar work finished even and smooth without using extra cement and including necessary scaffolding, formwork,safety precautions for multistoreys of buildings complete all as specified and directed. Note :- Safety equipment and Only steel scaffolding is allowed and rate included in above item. The work shall be carried out by enclosing affected area by green hessian cloth
69M&L for readymix plaster 15 mm thick cement plaster self curing on concrete surfaces (External surface) and similar work finished even and smooth without using extra cement and including necessary scaffolding, formwork,safety precautions for multistoreys of buildings complete all as specified and directed.Note :- Safety equipment and Only steel scaffolding is allowed and rate included in above item. The work shall be carried out by enclosing affected area by green hessian cloth .
70M&L for readymix plaster 5 mm thick cement plaster self curing on concrete surfaces of ceiling, and similar work finished even and smooth without using extra cement and including necessary scaffolding, formwork, safety precautions for multistoreys of buildings complete all as specified and directed.Note :- Safety equipment and Only steel scaffolding is allowed and rate included in above item. The work shall be carried out by enclosing affected area by green hessian cloth up to Four storey building.
71M&L for Preparation of new plastered or un-plastered surface of walls and applying two coats of oil bound distemper using mechanical/smart periodical by authorised applicator on walls over a coat of primer and over incl one coat of 1.50mm thick Birla putty complete all as specified and directed.
72M&L for Preparation of new plastered surfaces of ceiling and applying two coats of oil bound distemper using mechanical/smart periodical by authorised applicator, over a coat of primer and over incl one coat of 1.00 mm thick putty complete all as specified and directed.
73M&L for complete removal of existing treatment from old surfaces of wall scrapping by machanical means and applying two coats of oil bound distemper using mechanical/smart periodical by authorised applicator over a coat of primer and over incl 1.50mm thick of Birla putty complete all as specified and directed.
74M&L for Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) over a coat of 1.50mm thick putty complete all as specified and directed.
75M&L for complete removal of existing treatment from old surfaces of ceiling scrapping by machanical means and applying two coats of oil bound distemper using mechanical/smart periodical by authorised applicator, over a coat of primer and over incl 1.50 mm thick putty complete all as specified and directed.
76M&L for preparation of old steel and iron surfacesof any description, not otherwise descri-bed, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
77Demolition/ Dismantling of Mud in roofs/ PCC layer in any thickness/ unserviceable RCC/Sunken concrete etc removed from out of defence land complete all as specified and directed.
78M&L for cleaning the surface, remove dust and loose particle and unsound substructure and providing 30 mm thick cement screed (1:4) mixed with Dr fixit STP or equivalent tonic liquid 200ml/Bag of cement over Dr Fixit bonding coat MPB applying primer coat with solvent based bitumen primer @ 0.35ltr/Sqm align Dr Fixit/STP torch shield or equivalent APP Waterproofing membrane 3 mm thick with one side rough finish weight not less 3.0 KG per SQM. using gas burner to heat substance, pressing firmly from lower end to upper end with 100 mm over lap excess compound smoothened pressed in to seam using hot trovel sea edges well into grooves and protuct with CM 1:2 complete all as specified and directed.
79M&L for Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement: 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface up to 3 cuts complete, including providing skirting up to 150 mm height along the parapet walls in the same manner including 15 mmthick screed bed or bedding in CM 1:6 complete all as specified and directed.
80S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.
81M&L for Providing and fixing Gypsum Board 12mm thick designer/decorative any pattern in ceiling fixed with screw as per manufacturers instructions including enterior emulsion paint as approved complete all as specified and directed by EIC.
82S&F in repair Urinal (Back inlet) with fixing accessories, (Jaguar Cat Part No URS-WHT-13253N) Size : 385x325x635 mm in white Colour with Sensor mini concealed type flushing valve for urinal complete set with installation box (Battery Operated) (Jaguar Cat Part No SNR-STR-51083) complete including providing and fixing plugs, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; incl S&F of Battery operated urinal sensor flushing and incl required accessories for making connection with urinal, brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed.MAKE : Jaquar (Code : URS-WHT-13253N, Part Code : SNR-STR-51083 ) or equivalent in Kohler/CERA
83S&F in repair Urinal with sensor Kit,Spreader and Fixing Accessories Set Size 360x350x710mm Complete all as required for fixing of urinal complete all as specified and directed.Make: Jaquar Cat Part No URS-WHT-13267S or equivalent in Kohler/ Cera
84S&F PVC (SWR) floor trap /110/75 mm, setting and jointing with solvent cement complete all as specified and directed.
85S&F Glass Bricks as per required shape& Size approved by E-in-Charge and necessory fixing arrangement up to 3m hight complete all as specified and directed.
86M&L for 18 - 20 mm thick Italian marble (approved colour & Pattern & Size) machine cut fixed on floor with 10 mm thick backing layer of premium quality adhesive paste (Hardner + Resin) for marble (MYK Laticrete / Roff / Tenax etc) with help of 10mm depth groove trowl over incl 20 mm thick screed bed of cement mortar 1:6 and joint filling with epoxy including with admixture of pigment to match with shade of marble stone including cutting, polishing and cleaning work complete complete all as specified and directed. Note:- (i) 50 mm thick foam sheet to be used for cutting of marble (ii) Vibrator and 10 mm depth groove trowl and other required tools to be used (iii) work to be execute through highly skilled labour (iv) Marble Adhesive will be approved by Engr-in-Charge before use
87M&L for 18 - 20mm thick Italian marble (approved colour & Pattern & Size) machine cut fix as in skirting with 10 mm thick backing layer of premium quality adhesive paste (Hardner + Resin) for marble (MYK Laticrete / Roff / Tenax etc) with help of 10mm depth groove trowl over incl 15 mm thick layer of cement mortar 1:4 and joint filling with epoxy including with admixture of pigment to match with shade of marble stone including cutting, polishing and cleaning work complete complete all as specified and directed. NOTE:- (i) 50 mm thick foam sheet to be used for cutting of marble (ii) Vibrator and 10 mm depth groove trowl and other required tools to be used (iii) work to be execute through highly skilled labour (iv) Marble Adhesive will be approved by Engr-in-Charge before use
88M&L for 12 to 18mm HPL compact panels, these robust pilaster provide unbeatable support for restroom door and dividerrs/partition and mount on the top rail, rest on the floor using legs or eleantry box up, whichever option for choose for appear stunning, including necessary stainless steel accessories, top rail, U-channel, door stopper,thumb turn,occupancy indicator,spring loaded butt hinges,adjustable,door knob, coat hook,noise deafeing,screw & wall plug all rate are included in this item complete all as specified and directed.
89M&L for non skid full body Vitrified coloured Granalt tiles 15 mm thick (rectangular size 800x2400mm), area of each tiles not exceeding 1.92 sqm, in floors etc. machine cut fixed on floor with 10 mm thick backing layer of premium quality adhesive paste (Hardner + Resin) for marble (MYK Laticrete / Roff / Tenax etc) with help of 10mm depth groove trowl over incl 20 mm thick screed bed of cement mortar 1:6 and joint filling with epoxy including with admixture of pigment to match with shade complete all as specified and directed.Make: Kajaria/ Somany/ Johnson
90M&L for Damp proof (water proof paint) paint coating over new or old roof tiles/concrete suface 3 layer coating including preperation of old or new surface complete all as specified and directed by Engr-in-charge.
91Demolition of Brickwork or stone/boulder masonry, built in Cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
92Demolition cement concrete (reinforced) in ground floors and upto 4 storey of any description and in any position (reinforcement cut as required to facilitate demolition) complete all as specified and directed.
93M&L for reinforced cement concrete type B-1 1:2:4 using 20 mm graded aggregates (Nominal Mix) as in slab supported on walls, beams and columns in floors, roofs, landings,balconies, canopies, deck slab and in shelves and the like complete all as specified and directed.
94M&L for RCC type B-1 1:2:4 nominal mix (using 20 mm graded stone aggregate) in roof beams & lintel beam etc complete all as specified and directed.
95Formwork to sides and soffits of beam, lintel rough finished surfaces etc complete all as specified and directed.
96Form work to soffits of suspended slabs as roof slabs, floor slabs, landings and similar work n.exc 200mm thick for fair finished surfaces (Horizontal or sloping) complete all as specified and directed.
97M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with with mild steel wire (annealed) not less than 0.9mm dia or securing with clipscomplete all as specified and directed by Engr-in-Charge.
98M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:4. complete all as specified and directed.
99M&L for stainless steel Railing, post /SS grating over drain and other similar wk with necessary running welding, rubbing and polishing including fixing arrangement with bolts others complete all as specified and directed by Engr-in-Charge.
100Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5m in depth etc not exceeding 10 Sqm on plan for shafts, cesspits, manholes pier holes, foundation etc and getting out in soft/loose soil complete all as specified and directed.
101Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm on soft/loose soil complete all as specified and directed.
102Removing excavated material exc. 1.50 km but n exc. 5 km and depositing out side the MOD land complete all as specified and directed.
103M&L for cement concrete 1:4:8 type D2 (using 40 mm graded aggregate) as in foundation filling and mass concrete and the likecomplete all as specified and directed.
104M&L for reinforced cement concrete (Nominal Mix) type B-1 1:2:4 using 20 mm graded aggregates as in Foundations, including rafts, footings, foundation beams, Plinth beam, Bases for columns, etc basement slabs, under reamed piles and mass concrete complete all as specified and directed.
105Form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work : vertical or to batter complete all as specified and directed.
106Form work for rough finished surfaces of concrete Square, Rectangular or polygonal to sides of pillar, struts, posts, piers, columns and stanchions etc complete all as specified and directed.
107M&L for MS TMT bars 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge.
108S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed.
109S&F Steel work in tubular tru-sses of required shape including special shaped washer etc, complete using ERW or induction butt welded tubes complete all as specified and directed.Note : The rate of scaffolding arrangements during work of trusses and purlins is included
110S&F Plates (Plain or chequered) (Fe-410 -W Gde E-250 quality-A) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment including all required accessories complete all as specified and directed.
111M&L for fabricating, assembling and erection of Tensile Mesh Membrane with Multi- composed PVDF- lacquer system on both sides, wieldable without grinding, HT polyester yarns 2200 Dtex, minimum weight should be 1050g/sqm (EN ISO 2286-2), minimum tensile strength should be 6000 N/ 5cm in warp and 5500 N/5cm in weft directions (EN ISO 1421), minimum Tear strength should be 1800 N in warp and 1800 N in weft (DIN 53363). Flame Retradency DIN 4102: B1, Quality in conformity with ISO 9001 with minimum 10 years' warranty from the manufacturer. over steel frames with all fittings and fixtures such as Galvanized MS Membrane/ End Plate, Shackles, Rigging Screws, Turnbuckles, swedge, fork, keder rods & galvanized MS strands/ cables with stainless steel end terminals complete as per Drawing/ Detail & as per specifications and as per the instructions of Engineer-in- charge complete all as specified and directed.Note: Rate includes cost of fabric, shop drawings, forming, cutting, fabrication, hot weld stich of fabric, Transport to the site, assembling and installation with GI cables, hardware, Aluminum flat, EPDM gasket and required accessories wherever required complete including lifts up to all heights, tools and plants, and necessary scaffolding etc. required for all operations in all respect complete all as specified and directed.
112M&L for Granite (of any type) 20mm thick machine cut, bedded with 20mm screed bed in cement mortar 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, moulding and polishing complete all as specified and directed.
113M&L for Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.
114M&L for 22-25 mm thick Red Agra sand stone as in wall cladding, steps, footpath gang saw machine cut edges , polished, over 20mm thick cement screed in CM 1:4,set and jointed in cement mortar 1:3 and pointed in cement mixed with approved pigment to match the colour of the stone ( Note:- Size and colour of stone to be matched with existing stone) complete all as specified and directed.
115S&F Mild steel rag or lewis bolts, screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised but length of bolt exc 30 cm long as required and dia of neck is 20 mmincl removing all treatment upto original roof making drill / hole in RCC column / roof to fix the screw/bolt with a suitable adhesive complete all as specified and directed.
116M&L for \\"Deco Paint\\" (high-gloss automotive grade nitrocellulose lacquer or polyurethane lacquer) application on new or existing steel surfaces (of any type, e.g., mild steel, galvanized steel), including one coat primer and all necessary tools and plants, and incidentals required for all operations in all respects complete as specified and directed by the Engineer-in-Charge.
117M&L for 100mm thick PCC 1:4:8 type D-2 using (40mm graded aggregate) as in sub base of floor complete all as specified and directed.
118M&L for Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar (1:6) complete all as specified and directed.
119M&L for Providing cement concrete type B-I,1:2:4(20mm graded agg) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028 , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed.Note: Rates are included for removal of debries/ malba obtained from demolition/ dismantling from the site to out side of the MOD land up to 50 KM on daily basis and no extra payment will paid.
120E&M PORTION:Taking down carefully old point wiring with aluminium/ copper conductor (Light / Fan/ Socket/ power Point ) complete including fittings such as ceiling rose, pendent holders, regulators and socket point etc and making good the disturbed surface & wall/ floor complete all as specified and directed by Engr in charge.
121M&L for point wiring with PVC insulated unsheathed multi stranded FRLS type copper conductor cable of size 1.5 Sqmm 1100 V grade including one run of PVC insulated unsheathed multi stranded FRLS type copper conductor cable of size 1.5 sqmm as earth continuity conductor connected to common earth dolly in and including PVC concealed conduit 20 mm dia medium grade ISI marked and its accessories including provn of new factory made pressed steel modular switch/terminal box of suitable size and new modular front & back plates of approved colour/model of suitable size for housing the modular switches, sockets, fan regulators for one light/ fan/ exhaust fan point controlled by one no, one way 5 Amp switch complete all as specified and directed.Note: (i) Cutting chases for concealed conduit and making good in cement mortar is deemed included in unit rate.(ii) No cutting shall be done in the roof for laying PVC conduit for ceiling point wiring. In this specified portion wire shall run through the existing conduit or surface new conduit shall be provided as required.(iii) In case the wiring is encountered with any beam/column, then the wiring will run on surface to avoid any damage to the RCC portion.Make: Polycab/ RR Kabel/ KEI/ Finolex/ Havells
122All as per item No 120.00 above but for One three pin 5 Amp socket outlet point controlled by one no, one way switch on same board complete all as specified and directed.
123All as per item No 120.00 above but for One three pin 5 Amp socket outlet point controlled by one no, one way switch on independent board complete all as specified and directed.
124All as per item No 120.00 above but with 2.5 sqmm (for phase, neutral) and 2.5 sqmm (for continuous earth wire) cable for one 15/16 Amp socket outlet point on independent board complete all as specified and directed.
125S&F in replacement of modular Switch 6 amps, 230 volts, single pole, one way (ISI marked) complete all as specified and directed Make: Legrand CAT Part No.573400, Havells (Murano) CAT Part No. ACUSXXW101, Schneider cat part No -X1101WH
126S&F in replacement of 16 Amp rating modular switch one way one module complete all as specified and directed.Make: Legrand CAT Part No. 573410, Havells CAT Part No. ACUSXXW161, Schneider Cat Part No -X1101WH
127S&F in replacement of modular socket out let 230 volts grade (as catered in point wiring above) 6 Amp - 2/3 pin combined 2 module complete all as specified and directed.Make: Legrand CAT Part No. 573470, Havells CAT Part No. ACUKXXW063, Schneider Cat Part No -X2005WH
128S&F in replacement of modular socket out let 230 volts grade (as catered in point wiring above) 16 Amp - 2/3 pin combined 2 module complete all as specified and directed.Make: Legrand CAT Part No.573471, Havells CAT Part No. ACUKCXW163, Schneider Cat Part No -X2106WH
129S&F in replacement of factory made SPN DB's double door made out of CRCA mild steel sheet with insulating materials like polyester epoxy coated surface mounting 12 way SPN 220 Volts, with suitable busbar, neutral link & earth link suitable for complete all as specified and directed.Make : Legrand Cat Part No 507612, L&T Cat Part No BH112DDB, Schneider Cat Part No A9HSND12.
130S&F in replacment MCB, SP 6 to 32 Amp, 10 KA rupturing capacity, IS-8828 marked, and fixing in DBs (DBs Catered separately in this schedule) complete all as specified and directed.Note : Make of the MCB should be the same as that of DB
131All as per item No 129.00 above but MCB SP 40 Amps, B Curve complete all as specified and directed.
132All as per item No 129.00 above but MCB DP 32 Amps, C Curve complete all as specified and directed.
133S&F in repair submain wiring with PVC insulated unsheathed copper conductor multi stranded FRLSH type 1100V grade 2 x 4 sqmm complete drawn in new PVC concealed conduit of 25 mm dia and its accessories along with 1x 4 sqmm PVC insulated unsheathed copper conductor multi stranded FRLSH type cable for continuous earth wire and duly connected to common earth dolly complete all as specified and directed.Make- Polycab, Finolex, RR KABEL
134S&F in replacement of ceiling rose 3 terminal / PVC insulated body ISI Marked complete all as specified and directed.
135S&F in replacement of submain wiring with PVC insulated unsheathed copper conductor multi stranded FRLS type 1100V grade 2 x 6 sqmm complete drawn in new PVC concealed conduit and its accessories along with 1x 06 sqmm PVC insulated unsheathed copper conductor multi stranded FRLS type cable for continuous earth wire and duly connected to common earth dolly complete all as specified and directed.Make: RR KABEL/Polycab/Havells
136M&L for plate earthing complete with galvanized mild steel plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (in earth pit not less than 2.25 meter deep below ground level) with the top edge of earth plate at a depth not less than 1.5 meter below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and including GI strip 25x4 mm up to 7.50 RM bolted (with GI nuts, bolts & check nuts) and riveted to earth (Plate) electrode at one end and connected to main switch board / test point (including test point) at the other and watering GI pipe (medium grade) 20 mm bore from bottom of earth pit to top of electrode and 40 mm GI pipe light grade for earth strip protection complete with earth pit in PCC 1:2:4 type B0 using 12 mm graded crushed stone aggregate, RCC cover, funnel, wire mesh etc including necessary excavation and earth work in any type of soil, returning filling in and removal of surplus soil including dismantling of ol unsv earthing complete all as specified and directed.
137S&F in replacment earth continuity conductor or main earthing lead fixed to wall on batten or reccess or chases or buried in ground or drawn in conduit/ pipe or fixed to poles or any other indicated situation for loop earthing as required 25x4 mm galvanised iron strip complete all as specified and directed.
138S&F in replacement of LED Tube Light of 20 Watt 230Volt(size 4 ft) , box type complete with LED Tube Light 20 Watt & all accessories internally prewired including connecting up with three core sheathed flexible copper conductor cable of suitable sizecomplete all as specified and directed. Make: Bajaj cat Part No BAJAJ BCLAB 20W CW LED XT, Crompton cat Part No CCS-100-20-65-HL2-OP-NWH, Phillips Cat Part No BN308C LED20S-6500 L120 PSU WH.
139S&F in replacement of 1x4 fullglow recess mounted LED panel light of 36-40 W luminaire with high transmitive diffuser suitable for indoor space complete all as specified and as directed. Make: Havells Cat Part No PLUTONEO4X1PLR36WLED840S / Philips Cat No RC380B LED36S-6500 G5 L3W12 PSU OD / Crompton Cat Part No-LCTLRNE-40-CDL(1X4).
140S&F 10 watt K type up down LED wall light with aluminium IP -65 protection grade, water proof body,CCT-3000K complete all as specified and directed by Engr-In-Charge.Make : Philips/ Havells/ Orient
141S&F in replacement of LED Bulkhead fitting of 10 Watt 230 Volt , complete with LED Light 10 Watt & all accessories internally prewired including connecting up with three core sheathed flexible copper conductor cable of suitable size complete all as specified and directed.Make : Philips Cat Part No 929003670701CERCO, Crompton Cat Part No LCDSPLN-R-12-CDL, Panasonic Cat Part No PPAM16127
142S&F in replacement of remote controlled BLDC Ceiling fan having minimum CMM 220, complete with blades, down rods and all connected accessories operating at 230 V with 1200 mm sweep, rated 5 star with brushless direct curent (BLDC) motor, color as per site requirement. Making arrangement for hanging fans to ceiling with proper hook,nut,bolt with twin core twisted flexible copper conductor complete all as specified and directed by Engineer-In-Charge.make : Havells Cat Part No Ambrose Slim star 1200, Orient Cat Part No ECHOTECH Prime, Bajaj Cat Part No Bajaj Ethora Plus.Note: The old U/S 1200/1400mm sweep ceiling fan to be deposited to MES store yard in safe custody.
143S&F in replacement Exhaust Fan, AC Single phase, 230/240 Volt of size 300 mm, Minimum CMH-1600, metal body, high efficiency motor, dynamically balanced blade for better performancxe and corrosion resistant powder coated metallic finish including hole making (if necessary), complete with louvers frame and other connected accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size and making arrngement to fix the exhaust fan with proper nut bolt complete all as specified and directed..Make:- Havells VENTILAIR DB, Bajaj - Max Air, Crompton-TRANS AIR. Note:-The old U/S exhaust fan 450mm sweep deposited to MES store yard in safe custody.
144S&F in replacement of of plastic body fresh air fan of size 250 mm sweep with new plastic body fresh air fan 250mm AC single phase 230 V 50 HZ with blades,frame ,louvers and other connected accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size and making arrngement to fix the fresh air fan with proper nut bolt complete all as specified and directed.. Make:- Crompton Brisk Air Neo, Bajaj - Maxima DXL, Havells-Ventilair DX.Note:-The old U/S exhaust fan 450mm sweep deposited to MES store yard in safe custody.
145S&F in replacement of factory made load line DB's double door made out of CRCA mild steel sheet with insulating materials like polyester epoxy coated surface mounting 4 way VTPN 415 Volts, IP 43 with suitable busbar, neutral link & earth link suitable for MCCB TPN as incomer & MCB SP/TP as out going complete all as specified and directed.Make : Legrand Cat part No 507725, L&T (LK) Cat part No PHV304DDB, Schneider Cat Part No A9HVM04L.
146S&F in replacement MCCB, 4 pole, 415 volt of capacity 125 amp, breaking capacity not less than 36 KA , Icu=100% Ics thermal magnetic type confirming to IEC-60947-II, IS-13947-II , including thimbles, nuts, bolts ,washers etc. and connections, replacement of thimbles, minor parts like nuts bolts washer etc. complete all as specified and directed.Make : Legrand/Schneider/L&T (LK)
147S&F in replacement of LED Bldg security light fitting, outdoor type, wall mounted, integrated dusk-to-dawn energy-efficient LED Security / Street Light Luminaire of system wattage 35 Watt, 230 V, PF>0.95 AC with high pressure die cast aluminum hosing and heat resistant, integrated photo-sensor (dusk-to-dawn automatic switching), electronic control gear (driver), internal wiring, surge protection device (internal/external), suitable mounting accessories/ bracket, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.Make: Crompton/Philips/Havells.Note: (a) Srl Item No 02.00, 04.00, 08.00, 09.00, 22.00, 29.00, 36.00, 41.00, 49.00, 50.00, 78.00 to 82.00, 85.00, 87.00, 107.00 to 113.00, 115.00, 120.00, 132.00, 138.00, 140.00 to 143.00 & 146.00 of BOQ and all bathroom fittings and sanitary items are major items for the subject tender and material in respect of these items shall be procured within one month after placing of work order and produced before Engg in Charge alongwith original purchase vouchers as per direction of Garrison Engineer and shall obtain a certificate from Engg in charge that material in respect of above mentioned items have been submitted in the office of Engg in charge in their safe custody.Purchase vouchers of subject items shall be produce during technical check of payment.(b) Materials in respect of Freakishly low declared items if any at the time of acceptance of contract shall be procured within one month after placing of work order and submit the same in the office of Engg in charge alongwith original purchase vouchers in their safe custody and shall obtain a certificate from Engg in charge.Purchase vouchers of subject items shall be produce during technical check of payment. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58645707
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 38.47 Lakhs
LAST DATE 09-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Addn/ Altn To Ladies And Gents Toilet Of Swimming Pool And Provn Of Parking Shed For Pilot Vehicle At Chanakyabagh Under Ge New Delhi
Basic Detail
Tender No NIT No GE/ND-75/2026-27
Bidding Type Tender
Location
City New Delhi
State Delhi
Key Dates
Publish Date 20 Nov 2026
Submission Date 09 Dec 2026
Open Date 11 Dec 2026
Finance
Tender Value 38.47 Lakhs
Tender Fee 500
EMD 76945
Exemption Available
Document List
BOQ_897209.xls
db35d4d2-9fb4-4207-8557-649647ba609a.html
Tender75.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 20, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 09, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 17 days
Dec 11, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 19 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_897209.xls

html

db35d4d2-9fb4-4207-8557-649647ba609a.html

pdf

Tender75.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender