Tender For Periodical Services To Joginder Singh Enclave, Gurnam Singh Enclave And Manoj Pandey Enclave (Offrs Md Accn) Under Ge (North) Bathinda At Bathinda Mil Stn
Tender Value
49.50 Lakhs
Estimated cost
Bid Submission
04 Dec 2026
12 days left
EMD
99000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bathinda → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Periodical Services To Joginder Singh Enclave, Gurnam Singh Enclave And Manoj Pandey Enclave (Offrs Md Accn) Under Ge (North) Bathinda At Bathinda Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Material and Labour for providing and applying 15 mm thick ready-mix cement plaster on external surfaces of brickwork or concrete, including walls, soffits, chajjas, parapet walls and similar surfaces, using approved ready-mix cement plaster material, mixed and applied strictly in accordance with the manufacturer's instructions. The work shall include preparation of the background by removing loose material, dust, dirt and laitance, hacking/raking the existing surface wherever necessary to provide adequate bond, wetting the surface as required, applying the plaster to the specified uniform thickness, finishing the surface even, fair and true to line, level and plumb, and curing as recommended by the manufacturer. The item shall also include taking down existing cement plaster of any description and thickness, removal of dismantled material and all incidental operations required for completion of the work, complete all as specified and as directed by the Engineer-in-Charge. |
| 2 | Material and Labour for providing and applying 10–12 mm thick ready-mix cement plaster on internal surfaces of brickwork walls or concrete surfaces, using approved ready-mix cement plaster material, mixed and applied strictly in accordance with the manufacturer's instructions. The work shall include preparation of the background by removing loose material, dust, dirt and laitance, hacking/raking the existing surface wherever necessary to ensure proper bonding, wetting the surface as required, applying the plaster to the specified uniform thickness, finishing the surface even, smooth and true to line, level and plumb, and curing as recommended by the manufacturer. The item shall also include taking down existing cement plaster of any description and thickness, removal of dismantled material and all incidental operations required for completion of the work, complete all as specified and as directed by the Engineer-in-Charge. |
| 3 | Material and Labour for providing and applying 5 mm thick ready-mix cement plaster on concrete surfaces of ceilings, using approved ready-mix cement plaster material, mixed and applied strictly in accordance with the manufacturer's instructions. The work shall include preparation of the concrete surface by removing loose material, dust, dirt and laitance, hacking the surface wherever necessary to ensure proper bonding, wetting the surface as required, applying the plaster to the specified uniform thickness, finishing the surface even, smooth and true to line and level, and curing as recommended by the manufacturer. The item shall also include taking down existing cement plaster of any description and thickness, removal of dismantled material and all incidental operations required for completion of the work, complete all as specified and as directed by the Engineer-in-Charge. |
| 4 | Material and Labour for complete removal of existing surface treatment of any type or description, including paint, distemper, whitewash, putty, texture coating, plaster finish or other applied coating, in any number of layers, from internal and external wall and ceiling surfaces, soffits, chajjas, roof projections and similar surfaces, by scraping with steel patti/scraper or by using mechanical sander/grinder machine fitted with an effective dust-collection arrangement and suction vacuum bag, adopting a suitable systematic methodology to minimise dust generation and prevent damage to the underlying substrate. The work shall include removal of all loose, flaking and adhering treatment to expose a sound surface, collection and removal of scraped material and dust, cleaning of the treated surfaces and leaving them ready for subsequent application of new treatment, complete all as specified and as directed by the Engineer-in-Charge. |
| 5 | Material and Labour for preparation of newly plastered surfaces or surfaces after complete removal of existing treatment, by applying ready-mixed acrylic wall putty on internal surfaces of walls, ceilings, soffits and similar surfaces, in two or more coats, to achieve a total thickness varying from 1.5 mm to 2 mm, as required for obtaining the desired smoothness and levelling of the surface. The work shall include cleaning and preparation of the background, filling of undulations, pores, cracks and minor surface imperfections with acrylic putty, application of successive coats to achieve a uniform and even finish, sanding with mechanical wall sander after application of the first and subsequent coats, removal of sanding dust and final preparation of the surface to receive interior paint, complete all as specified and as directed by the Engineer-in-Charge.Notes:(i) After completion of wall putty application and preparation of the surface, the contractor shall inform the GE as well as the Engineer-in-Charge for inspection of the prepared surface. Further finishing work shall be commenced only after approval of the prepared surface by the GE and the Engineer-in-Charge, duly recorded through a Site Order.(ii) Make of acrylic wall putty: Berger / Asian Paints / Nerolac, or equivalent as specified and approved. |
| 6 | Material and Labour for preparation of external surfaces of walls, ceilings, soffits and similar surfaces by applying ready-mixed cement-based acrylic wall care putty in two or more coats, to achieve a total thickness varying from 1.5 mm to 2.5 mm, as required for obtaining the desired smoothness and levelling of the surfaces. The work shall include cleaning and preparation of the background, filling of surface undulations, pores and minor imperfections with putty, application of successive coats to obtain a uniform and even finish, sanding with suitable sandpaper after application of the putty coats, removal of sanding dust and final preparation of the surface to receive subsequent painting, complete all as specified and as directed by the Engineer-in-Charge.Make: Acrylic wall care putty as described in the List of Makes/Manufacturers under Appendix ‘B’ here-in-after.Notes:(i) After completion of wall putty application and preparation of the surface, the contractor shall inform the GE as well as the Engineer-in-Charge for inspection of the prepared surface before application of further finishes. Further finishing work shall commence only after approval of the prepared surface by the GE and the Engineer-in-Charge, duly recorded through a Site Order.(ii) The make of acrylic wall care putty shall be as recommended by the manufacturer of the paint proposed to be applied. |
| 7 | Material and Labour for preparation and painting of internal wall surfaces (new or old), duly prepared after complete removal of existing treatment and application of putty, with two coats of approved interior acrylic emulsion paint of approved tint/shade (Company Depot Tinted), at a coverage rate of 14.5 sq m per litre for two coats, over and including one coat of suitable interior wall primer at a coverage rate of 11 sq m per litre for one coat. The primer shall be of the same make as the acrylic emulsion paint. The work shall include cleaning and dusting of the prepared surfaces, application of primer by paint roller/brush, allowing adequate drying between coats, application of two uniform coats of acrylic emulsion paint by roller/brush to achieve an even, smooth and uniform finish, including all necessary tools, tackles, labour and incidental operations, complete all as specified and as directed by the Engineer-in-Charge.Notes:(i) Complete removal of existing surface treatment and application of putty shall be measured and paid separately under the respective items of the BOQ.(ii) Brand and Make of Interior Acrylic Emulsion Paint: Silk Glamour of Berger / Royal Aspira of Asian Paints / Impression Eco Clean of Nerolac.(iii) Brand and Make of Interior Primer: Seal-O-Primer of Berger / SmartCare Primero of Asian Paints / Excel Alkali Prime of Nerolac. |
| 8 | Material and Labour for preparation and painting of internal wall surfaces (new or old), duly prepared after complete removal of existing surface treatment and application of putty, with two coats of approved interior acrylic emulsion paint of approved tint/shade (Company Depot Tinted), at a coverage rate of 12 sq m per litre for two coats, over and including one coat of suitable interior wall primer at a coverage rate of 11 sq m per litre for one coat. The primer shall be of the same make as the acrylic emulsion paint. The work shall include cleaning and dusting of the prepared surfaces, application of primer by paint roller/brush, allowing adequate drying between coats, application of two uniform coats of acrylic emulsion paint by roller/brush to achieve an even, smooth and uniform finish, including all necessary tools, tackles, labour and incidental operations, complete all as specified and as directed by the Engineer-in-Charge.Notes:(i) Complete removal of existing surface treatment and application of putty shall be measured and paid separately under the respective items of the BOQ.(ii) Brand and Make of Interior Acrylic Emulsion Paint: Easy Clean Matt of Berger / Apcolite Advanced of Asian Paints / Impression Ultra Fresh of Nerolac.(iii) Brand and Make of Interior Primer: Seal-O-Primer of Berger / SmartCare Primero of Asian Paints / Excel Alkali Prime of Nerolac. |
| 9 | Material and Labour for preparation and painting of internal wall surfaces (new or old), duly prepared after complete removal of existing surface treatment and application of putty, with two coats of approved interior acrylic emulsion paint of approved tint/shade (Company Depot Tinted), at a coverage rate of 8 sq m per litre for two coats, over and including one coat of suitable interior wall primer at a coverage rate of 11 sq m per litre for one coat. The primer shall be of the same make as the acrylic emulsion paint. The work shall include cleaning and dusting of the prepared surfaces, application of primer by paint roller/brush, allowing adequate drying between coats, application of two uniform coats of acrylic emulsion paint by roller/brush to achieve an even, smooth and uniform finish, including all necessary tools, tackles, labour and incidental operations, complete all as specified and as directed by the Engineer-in-Charge.Notes:(i) Complete removal of existing surface treatment and application of putty shall be measured and paid separately under the respective items of the BOQ.(ii) Brand and Make of Interior Acrylic Emulsion Paint: Bison Acrylic Emulsion of Berger / Tractor Emulsion of Asian Paints / Beauty Smooth of Nerolac.(iii) Brand and Make of Interior Primer: Seal-O-Primer of Berger / SmartCare Primero of Asian Paints / Excel Alkali Prime of Nerolac. |
| 10 | Material and Labour for preparation and painting of internal ceiling surfaces (new or old), duly prepared after complete removal of existing surface treatment and application of putty, with two coats of approved interior acrylic emulsion paint in white shade (Company Depot Tinted), at a coverage rate of 7.50 sq m per litre for two coats, over and including one coat of suitable interior wall/ceiling primer at a coverage rate of 10.50 sq m per litre for one coat. The primer shall be of the same make as the acrylic emulsion paint. The work shall include cleaning and dusting of the prepared surfaces, application of primer by paint roller/brush, allowing adequate drying between coats, application of two uniform coats of acrylic emulsion paint by roller/brush to achieve an even, smooth and uniform finish, including all necessary tools, tackles, labour and incidental operations, complete all as specified and as directed by the Engineer-in-Charge.Notes:(i) Complete removal of existing surface treatment and application of putty shall be measured and paid separately under the respective items of the BOQ.(ii) Brand and Make of Interior Acrylic Emulsion Paint: Bison Acrylic Emulsion of Berger / Tractor Emulsion of Asian Paints / Beauty Smooth of Nerolac.(iii) Brand and Make of Interior Primer: Seal-O-Primer of Berger / SmartCare Primero of Asian Paints / Excel Alkali Prime of Nerolac. |
| 11 | Material and Labour for preparation and repainting of existing internally treated vertical surfaces of walls and ceilings by removing/scraping down all loose, flaking and deteriorated existing surface treatment using broom, paint brush, sandpaper or other suitable means, including sanding with mechanical wall sander wherever required to obtain a sound, smooth and suitable surface for repainting. The work shall include cleaning and dusting of the surfaces, filling nail holes, minor surface imperfections and light hairline cracks with suitable ready-mixed putty wherever required, sanding the filled portions to obtain an even finish, and applying one coat of approved interior acrylic emulsion paint of approved tint/shade matching the existing colour (Company Depot Tinted), at a coverage rate of 20 sq m per litre for one coat, over and including one coat of suitable interior wall primer at a coverage rate of 13 sq m per litre for one coat. The primer shall be of the same make as the acrylic emulsion paint. Primer and paint shall be applied uniformly by paint roller/brush, allowing adequate drying time between coats, to achieve a smooth, even and uniform finish, including all necessary materials, tools, tackles and incidental operations, complete all as specified and as directed by the Engineer-in-Charge.Notes:(i) Brand and Make of Interior Acrylic Emulsion Paint: Easy Clean Matt of Berger / Apcolite Advanced of Asian Paints / Impression Ultra Fresh of Nerolac.(ii) Brand and Make of Interior Primer: Seal-O-Primer of Berger / SmartCare Primero of Asian Paints / Excel Alkali Prime of Nerolac. |
| 12 | Material and Labour for preparation and painting of external surfaces of walls, soffits of chajjas, roof projections, cantilevers, balconies and similar surfaces (new or old), duly prepared after complete removal of existing surface treatment, with two coats of approved exterior acrylic emulsion paint of approved tint/shade (Company Depot Tinted), at a coverage rate of 6 sq m per litre for two coats, over and including one coat of suitable exterior wall primer at a coverage rate of 11 sq m per litre for one coat. The primer shall be of the same make as the exterior acrylic emulsion paint. The work shall include cleaning and dusting of the prepared surfaces, application of primer by airless spray gun, allowing adequate drying time, and application of two uniform coats of exterior acrylic emulsion paint by airless spray gun to achieve an even, smooth and uniform finish, including all necessary materials, tools, tackles, spraying equipment and incidental operations, complete all as specified and as directed by the Engineer-in-Charge.Notes:(i) Complete removal of existing surface treatment shall be measured and paid separately under the respective item of the BOQ.(ii) Brand and Make of Exterior Acrylic Emulsion Paint: Weather Anti Dust of Berger / Apex Ultima of Asian Paints / Excel Mica Marble of Nerolac.(iii) Brand and Make of Exterior Primer: Seal-O-Primer of Berger / SmartCare Primero of Asian Paints / Excel Alkali Prime of Nerolac. |
| 13 | Material and Labour for preparation and painting of external surfaces of walls, soffits of chajjas, roof projections, cantilevers, balconies and similar surfaces (new or old), duly prepared after complete removal of existing surface treatment, with two coats of approved exterior acrylic emulsion paint of approved tint/shade (Company Depot Tinted), at a coverage rate of 6 sq m per litre for two coats, over and including one coat of suitable exterior wall primer at a coverage rate of 11 sq m per litre for one coat. The primer shall be of the same make as the exterior acrylic emulsion paint. The work shall include cleaning and dusting of the prepared surfaces, application of primer by airless spray gun, allowing adequate drying time between coats, and application of two uniform coats of exterior acrylic emulsion paint by airless spray gun to achieve an even, smooth and uniform finish, including all necessary materials, tools, tackles, spraying equipment and incidental operations, complete all as specified and as directed by the Engineer-in-Charge.Notes:(i) Complete removal of existing surface treatment shall be measured and paid separately under the respective item of the BOQ.(ii) Brand and Make of Exterior Acrylic Emulsion Paint: Weather Coat Glow of Berger / Apex Weatherproof of Asian Paints / Excel of Nerolac.(iii) Brand and Make of Exterior Primer (as supplied): Seal-O-Primer of Berger / SmartCare Primero of Asian Paints / Excel Alkali Prime of Nerolac. |
| 14 | Material and Labour for preparation and repainting of existing treated external surfaces of walls, soffits of chajjas, roof projections, cantilevers, balconies and similar surfaces by removing/scraping down all loose, flaking and deteriorated existing surface treatment using broom, paint brush, sandpaper or other suitable means to obtain a sound and suitable surface for repainting. The work shall include cleaning and dusting of the surfaces, filling nail holes, minor surface imperfections and light hairline cracks with suitable wall putty wherever required, sanding the filled portions to obtain an even finish, and applying one coat of approved exterior acrylic emulsion paint of approved tint/shade matching the existing colour (Company Depot Tinted), at a coverage rate of 11.50 sq m per litre for one coat, over and including one coat of suitable exterior wall primer at a coverage rate of 15 sq m per litre for one coat. The primer shall be of the same make as the exterior acrylic emulsion paint. Primer and paint shall be applied uniformly by airless spray gun, allowing adequate drying time between coats, to achieve an even, smooth and uniform finish, including all necessary materials, tools, tackles, spraying equipment and incidental operations, complete all as specified and as directed by the Engineer-in-Charge.Notes:(i) Brand and Make of Exterior Acrylic Emulsion Paint: Weather Coat Glow of Berger / Apex Weatherproof of Asian Paints / Excel of Nerolac.(ii) Brand and Make of Exterior Primer (as supplied): Seal-O-Primer of Berger / SmartCare Primero of Asian Paints / Excel Alkali Prime of Nerolac. |
| 15 | Material and Labour for preparing newly plastered surfaces or existing wall surfaces after complete removal of the old treatment, and applying three coats of whitewash using lime slaked at site. The unslaked lime shall be mixed and stirred with approximately 5 litres of water per kg of unslaked lime to form a thin cream, allowed to stand for 24 hours and thereafter screened through clean coarse cloth. To every one cubic metre of lime cream, 1 kg of gum dissolved in hot water shall be added. Further, approximately 1.3 kg of sodium chloride dissolved in hot water shall be added for every 10 kg of lime to make the coating hard and rub-resistant. A small quantity of ultramarine blue, not exceeding 3 g per kg of lime, shall also be added to the last two coats of whitewash solution. The entire solution shall be thoroughly stirred before application. The work shall include preparation and cleaning of the surfaces, removal of loose particles and dust, preparation of the whitewash solution in the prescribed proportions, application of three uniform coats of whitewash by suitable brushes, allowing adequate drying between successive coats and finishing the surfaces evenly, complete all as specified and as directed by the Engineer-in-Charge. |
| 16 | Material and Labour for preparing newly plastered ceiling surfaces or existing ceiling surfaces after complete removal of the old treatment, and applying three coats of whitewash using lime slaked at site. The unslaked lime shall be mixed and stirred with approximately 5 litres of water per kg of unslaked lime to form a thin cream, allowed to stand for 24 hours and thereafter screened through clean coarse cloth. To every one cubic metre of lime cream, 1 kg of gum dissolved in hot water shall be added. Further, approximately 1.3 kg of sodium chloride dissolved in hot water shall be added for every 10 kg of lime to make the coating hard and rub-resistant. A small quantity of ultramarine blue, not exceeding 3 g per kg of lime, shall also be added to the last two coats of whitewash solution. The entire solution shall be thoroughly stirred before application. The work shall include preparation and cleaning of the ceiling surfaces, removal of loose particles and dust, preparation of the whitewash solution in the prescribed proportions, application of three uniform coats of whitewash by suitable brushes, allowing adequate drying between successive coats and finishing the surfaces evenly, complete all as specified and as directed by the Engineer-in-Charge. |
| 17 | Material and Labour for preparation and application of two coats of whitewash on existing treated wall surfaces, including cornices, using lime slaked at site. The unslaked lime shall be mixed and stirred with approximately 5 litres of water per kg of unslaked lime to form a thin cream, allowed to stand for 24 hours and thereafter screened through clean coarse cloth. To every one cubic metre of lime cream, 1 kg of gum dissolved in hot water shall be added. Further, approximately 1.3 kg of sodium chloride dissolved in hot water shall be added for every 10 kg of lime to make the coating hard and rub-resistant. A small quantity of ultramarine blue, not exceeding 3 g per kg of lime, shall also be added to the whitewash solution, and the entire solution shall be thoroughly stirred before application. The work shall include cleaning and preparation of existing treated wall surfaces, including cornices, removal of loose particles, dust and flaking material, preparation of the whitewash solution in the prescribed proportions, application of two uniform coats of whitewash by suitable brushes, allowing adequate drying between successive coats and finishing the surfaces evenly, complete all as specified and as directed by the Engineer-in-Charge. |
| 18 | Material and Labour for preparation and application of two coats of whitewash on newly plastered ceiling surfaces or existing ceiling surfaces after complete removal of the old treatment, using lime slaked at site. The unslaked lime shall be mixed and stirred with approximately 5 litres of water per kg of unslaked lime to form a thin cream, allowed to stand for 24 hours and thereafter screened through clean coarse cloth. To every one cubic metre of lime cream, 1 kg of gum dissolved in hot water shall be added. Further, approximately 1.3 kg of sodium chloride dissolved in hot water shall be added for every 10 kg of lime to make the coating hard and rub-resistant. A small quantity of ultramarine blue, not exceeding 3 g per kg of lime, shall also be added to the whitewash solution, and the entire solution shall be thoroughly stirred before application. The work shall include cleaning and preparation of the ceiling surfaces, removal of loose particles and dust, preparation of the whitewash solution in the prescribed proportions, application of two uniform coats of whitewash by suitable brushes, allowing adequate drying between successive coats and finishing the surfaces evenly, complete all as specified and as directed by the Engineer-in-Charge. |
| 19 | Material and Labour for complete removal of existing paint and surface treatment from steel and iron surfaces of any description or section, including trusses, purlins and similar structural members, exceeding 10 cm in width or girth, not otherwise specifically described. The work shall include scraping and removal of all existing paint, rust, loose scale and other deteriorated coatings by suitable mechanical or manual means, cleaning the surfaces thoroughly, removing dust, grease and other contaminants, and preparing the metal surfaces to receive fresh painting. The prepared surfaces shall be provided with one coat of red oxide metal primer, followed by two coats of approved synthetic enamel paint, applied uniformly to achieve a smooth, even and durable finish, allowing adequate drying time between successive coats, complete all as specified and as directed by the Engineer-in-Charge.Make: As described in the List of Makes/Manufacturers under Appendix ‘B’ here-in-after. |
| 20 | Material and Labour for preparation and repainting of existing painted steel and iron surfaces of any description, exceeding 10 cm in width or girth, not otherwise specifically described. The work shall include cleaning the existing painted surfaces by removing loose, flaking and deteriorated paint, rust, dust, grease and other foreign matter by suitable scraping, wire brushing or other approved means, rubbing down with sandpaper to obtain a smooth and sound surface, spot treatment of exposed metal portions with suitable primer wherever required, and applying one uniform coat of approved synthetic enamel paint to the prepared surfaces to achieve an even and durable finish, complete all as specified and as directed by the Engineer-in-Charge.Make: As described in the List of Makes/Manufacturers under Appendix ‘B’ here-in-after. |
| 21 | Material and Labour for preparation and repainting of existing painted wooden and wood-based surfaces of any description, exceeding 10 cm in width or girth, not otherwise specifically described. The work shall include cleaning the existing painted surfaces by removing loose, flaking and deteriorated paint, dust, dirt and other foreign matter by suitable scraping and sanding, rubbing down with sandpaper to obtain a smooth and sound surface, filling minor cracks, holes and surface imperfections with suitable wood filler wherever required, spot priming of exposed bare wooden surfaces with suitable primer, and applying one uniform coat of approved synthetic enamel paint to achieve an even, smooth and durable finish, complete all as specified and as directed by the Engineer-in-Charge.Make: As described in the List of Makes/Manufacturers under Appendix ‘B’ here-in-after. |
| 22 | Material and Labour for preparation and painting of existing external surfaces of walls, RCC surfaces, soffits of chajjas, roof projections, cantilevers, balconies and similar surfaces with two coats of approved cement-based exterior paint, including highlighter in approved colour/shade as directed by the GE, at a coverage rate of 5.00 sq m per kg for two coats, over and including one coat of exterior wall cement primer at a coverage rate of 10 sq m per litre for one coat. The primer shall be suitable for use as an undercoat and shall be as recommended by the manufacturer of the cement-based paint. The work shall include cleaning and preparation of existing surfaces by removing loose paint, dust, dirt, algae, fungus and other foreign matter, scraping and rubbing down wherever required to obtain a sound and suitable surface, application of one uniform coat of exterior wall cement primer by brush or roller, allowing adequate drying time, followed by application of two uniform coats of cement-based exterior paint by brush or roller to achieve an even, smooth and durable finish, including provision of highlighter in approved colour/shade, all necessary materials, tools, tackles and incidental operations, complete all as specified and as directed by the Engineer-in-Charge.Make: Cement-based exterior paint and exterior wall cement primer shall be of makes as described in the List of Makes/Manufacturers under Appendix ‘B’ here-in-after. |
| 23 | Material and Labour for preparation and painting of existing external surfaces of walls, RCC surfaces, soffits of chajjas, roof projections, cantilevers, balconies and similar surfaces with one coat of approved cement-based exterior paint, including highlighter in colour/shade as approved by the GE, at a coverage rate of 7.00 sq m per kg for one coat, over and including one coat of suitable exterior wall cement primer at a coverage rate of 10 sq m per litre for one coat. The primer shall be suitable for use as an undercoat and shall be as recommended by the manufacturer of the cement-based paint. The work shall include cleaning and preparation of existing surfaces by removing loose paint, dust, dirt, algae, fungus and other foreign matter, scraping and rubbing down wherever required to obtain a sound and suitable surface, application of one uniform coat of exterior wall cement primer by brush or roller, allowing adequate drying time, followed by application of one uniform coat of cement-based exterior paint by brush or roller to achieve an even and uniform finish, including provision of highlighter in approved colour/shade, all necessary materials, tools, tackles and incidental operations, complete all as specified and as directed by the Engineer-in-Charge.Make: Cement-based exterior paint and exterior wall cement primer shall be of makes as described in the List of Makes/Manufacturers under Appendix ‘B’ here-in-after. |
| 24 | Material and Labour for preparation of existing polished wooden and wood-based surfaces of any description by rubbing down with sandpaper No. 150 to remove surface imperfections and provide a suitable base for fresh treatment, including filling and repairing holes, cracks, dents and other minor surface defects with suitable putty/wood filler, allowing the filler to dry and rubbing smooth, followed by application of one coat of melamine finish (glossy or matt, as directed by the Engineer-in-Charge) to match the existing colour and finish. The work shall include thorough cleaning of the prepared surface, application of melamine finish uniformly without brush marks, runs or patches, and all necessary materials, tools, tackles and incidental operations, complete all as specified and as directed by the Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysDec 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender