Defence Statutory Bodies & Commissions/Committees Closing in 19 days TDR #58645695

Tender For Welcome Maintenance & Misc B/R Works Of Md Accn Including Internal Periodicals, Joinery, Floor, Plaster And Certain Connected B/R Works Of Old & New Aps Colony And Other Adjoining Areas Of Age B/R-Ii Under Ge(Central) Delhi Cantt

Issued by Statutory Bodies & Commissions/Committees · New Delhi, Delhi
Tender Value
50 Lakhs
Estimated cost
Bid Submission
11 Dec 2026
19 days left
EMD
1 Lakhs
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Welcome Maintenance & Misc B/R Works Of Md Accn Including Internal Periodicals, Joinery, Floor, Plaster And Certain Connected B/R Works Of Old & New Aps Colony And Other Adjoining Areas Of Age B/R-Ii Under Ge(Central) Delhi Cantt

BOQ

Name of Work:- WELCOME MAINT & MISC B/R WORKS OF MD ACCN INCLUDING INTERNAL PERIODICALS, JOINERY, FLOOR, PLASTER AND CERTAIN CONNECTED B/R WORKS OF OLD & NEW APS COLONY AND OTHER ADJOINING AREAS OF AGE B/R-II UNDER GE(CENTRAL) DELHI CANTT
Sl. No. Item Description
1Taking down cement or cement lime plaster on brick or stone walls, etc including racking out joints, hacking for key, scrbbing down with water etc, upto G+3 storey bldg complete and specified
2Demolition of brick work built in cement mortar of any description and position,upto G+3 storey bldg complete and specified.
3M&L brick work with sub class' B' bricks(except bricks) of old size, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6.upto G+3 storey bldg complete and specified
4All as per ser No 3 but except bricks all as specified (Serviceable bricks retrieved from serial item No 02 shall be used) upto G+3 storey Bldg complete all as specified.
5M&L for 15mm thick rendering in cement mortar 1:6 finished even and other than fair surface on wall complete all as specified and directed by Engineer-in-Charge
6M & L for 5 mm thick rendering in cement mortar 1:3 on concrete surfaces of ceiling, chajja and like surface finished even and fair complete all as specified.
7M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1 : 4 mixed finished even and fair including upto G+3 storey complete all as specified.
8Materials & labour for preparation of new plastered surface of walls etc and applying two coats of OBD over and including a coat of Birla/JK wall care putty to match the existing surfaces of wall as required complete all as specified & directed Note:-Application will be done with rollers through authorised applicator of complany.
9Materials and labour for preparation of new plastered surface of walls and applying two coats of exterior emulsion paint (weather proof) applying Apex (Ultima) of M/S Asian paints or equivalent over prepared surfaces of walls upto G+3 storey complete all as specified and directed.
10Material and labour for two coats of white wash on ceiling surfaces including preparation of new surfaces complete all as specified and directed
11Material & labour for preparation of of plastered or unplastered old surfaces of ceiling and applying one coat of white wash complete all as specified and directed.
12Material and labour for washing, rubbing down and stopping of distempered or painted surfaces and applying one coat of oil bound distemper on walls including a coat of Birla/JK wall care putty to match the existing surfaces complete all as specified and directed.Note:-Application will be done with rollers through authorised applicator of complany.
13Material and labour for washing, rubbing down and stopping of distempered or painted surfaces and applying two coat of oil bound distemper on walls including a coat of Birla/JK wall care putty to match the existing surfaces complete all as specified and directed.Note:-Application will be done with rollers through authorised applicator of complany.
14Materials and labour for preparation of old plastered surface of walls and applying one coats of exterior emulsion paint (weather proof) applying Apex (Ultima) of M/S Asian paints or equivalent over prepared surfaces of walls upto G+3 storey complete all as specified and directed.
15Materials and labour for preparation of old plastered surface of walls and applying two coats of exterior emulsion paint (weather proof) applying Apex (Ultima) of M/S Asian paints or equivalent over prepared surfaces of walls upto G+3 storey complete all as specified and directed.
16Material and Labour for applying one coat of synthetic enamel paint on old wooden surfaces of any description, not otherwise described over 10cm width or girth after preparation of surfaces complete all as specified and directed.
17Material and Labour for applying one coat of synthetic enamel paint over prepared old steel surfaces of any description, not otherwise described over 10cm width or girth and complete all as specified and directed.
18Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
19M&L for 595mm to 605mmx595mm to 605mm x7-8mm thick coloured ceramic tiles, joint free as approved by GE in fllors over 15mm thick screed bed in CM 1:6, G+3 storey bldg complete all as specified.
20M&L for 595mm to 605mmx595mm to 605mm x7-8mm thick coloured ceramic tiles as skirting,set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in CM 1:4 G+3 storey bldg complete all as specified.
21M&L for non skid ceramic tiles 7mm to 8mm thick(square/rectangular) area of each tile exceeding 0.11 sqm but n.exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor including 15mm thick screed bed in CM 1:6 G+3 storey bldg complete all as specified.
22M&L for coloured glazed ceramic tiles 300x450x7-8mm or (300x600mm)x8 to 10mm thick on vertical surfaces on skirting/dados and risers to steps laid and over including rendering 10mm thick cement mortor in CM 1:4, G+3 storey bldg complete all as specified
23S&F 110mm dia PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall,ceiling or in floors with suitable clamps/bracket including taking down old pipes and necessary cutting through RCC roof and brick work etc and making good all as specified
24Suply and fix in repair 110mm bore PVC (SWR) bends any redius with solvent joint complete all as specified and directed.
25Taking up or down steel tubing and connections of 15mm bore all as specified.
26Taking up or down steel tubing and connections of 20mm bore all as specified.
27Supplying and laying of CPVC 20mm OD pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl brass coupling fittings complete all as specified complete with fitting as required.
28Supplying and laying of CPVC 25 mm OD pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl brass coupling fittings complete all as specified complete with fitting as required.
29M&L cutting and chases pinning in concrete block/ Brick work making good to facings where required and pointing in cement morter 1:3 and cutting chases for concealed water tubing or conduit wiring,etc and making good cutting not exc 10 cm girth.
30S&F 500 Ltr capacity roational moulded polyethylene water storage tanks triple layer (Cylindrical vertical with closed top) in white colour hoisted and fixed in position with 20mm ball brass valves,high pressure, with polythene float and flynut complete,screwed for iron pipe or brass ferrule minimum wt 20mm-210gm and S&F in repair 20mm dia Gun-metal,globe or gate valves, with iron wheel head, screwed both ends for irons for iron pipe and fixed incl dismantling of PVC wate tanks of exc 250 litres and n.exc 500 litres capacity of any condition or type incl complete all as specified and directed.
31Supply and fixing in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs washers and wasters incl bedding in cement mortar to dwarf walls or incl fixing cantilever brackets and connecting union to pipe over all size (915mmx460mm bowl size 410x330x160mm) complete all as specified and directed by Engineer-in-Charge. Make Hindustan/JINDAL
32Supply & fix in repair PVC waste pipe 32mm dia for wash hand basin complete all as specified and directed.
33Supply & fix in repair glass self assembly made of 5 to 6 mm thick sheet glass of size 600 x 120mm fixed with CP brackets complete all as specified
34Supply & fix in repair glass corner shelf assembly fancy type made of 6 to 7 mm thick sheet glass of size 250x 250mm fixed with CP brackets complete all as specified and directed.
35Supply & fix in repair chromium plated, ABS plastic with stainless steel tube with PVC holder jet health faucet fixed in WC seats complete all as specified and directed.
36S&F in repairs vitreous china couloured European type EC with 'P' or 'S' trap and seat cover for 100 mm bore, including connection to drain and to flushing cistern with pipe 32mm dia PVC pipe and fixing bolts complete all as specified and directed by Engr-in-Charge
37Supply and fixing in repair vitreous china wash basin white flat back size 580x 450mm excluding taps but incl 32mm dia CP waste fitting and PVC waste pipe 610 mm long and brackets complete all as specified and directed by Engineer-in-Charge.
38Supply and fixing in repair vitreous china squatting pan white orissa pattern size 580x440mm with integral foot rests (excluding flushing cistern & flush pipe) with cast iron P trap including lime concrete bedding and making good the disturbed portion to match with the existing surface of floor complete all as specified and directed by Engineer-in-Charge.
39Supply and fixing in repair PVC valveless, syphonic action type, flushing cistern, 10 ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets and PVC bend including connection to IWC/EWC and fixing on wall with brackets complete all as specified and directed by Engr-in-charge.
40Supply and fixing in repair 15mm bore bib tap fancy type chromium plated long body cast copper alloy screwed down for iron pipes or for brass ferrule complete all as specified and directed by Engineer-in-Charge.
41Supply and fixing in repair 15mm bore pillar taps cast copper alloy fancy type chromium plated screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and directed by Engineer-in-Charge.
42Supply and fixing in repair 15mm bore stop valve/angle valve fancy type chromium plated with long shank and cup (concealed type) screwed down high pressure screwed both ends for iron pipe or for union complete all as specified and directed by Engineer-in-Charge.
43Supply and fixing in repair looking mirror 600x450 mm bevelled edges of selected quality glass mounted on 6mm commercial ply or AC building board with aluminium frame around and fixed to wooden plugs with CP brass screws complete all as specified and directed by Engineer-in-Charge. Make : Atul/Modi Guard/Swastik.
44Supply and fixing PVC connections 15mm bore, 450 mm length with PTMT nuts complete all as specified and directed by Engineer-in-Charge. Make : Symet/ Prayag
45Description all as per item No 37 here-in-before but length 600mm.
46Supply and fixing in repair cast copper alloy chromium plated shower rose fancy type fixed to 15mm bore pipe complete all as specified and directed by Engineer-in-Charge.
47Supply and fixing in repair brass chromium plated tubular towel rail 20mm dia ‘D’ type 60 cms long between flanges complete all as specified and directed by Engineer-in-Charge.
48Taking down chowkats or frames n.exc 1.5 sqm each with shutters (without taking off shutters from frames), complete all as specified.
49Taking down chowkats or frames exc. 1.5 Sqm and n.exc 4 Sqm each with shutters (without taking off shutters from frames ), complete all as specified.
50M&L second class hard wood plain, solid, straight, chowkhats and frames,wrought framed rebated on the solid,rounded or chamfered,put together with glue pinned at joints including treating the back of chowkhats with two coat of black japan/bituminious paint compelete all as specified and directed
51S& F 35 mm thick flush shutters solid core construction, Flush shutters shall have teak wood edging as specified in IS (Incl two Nos150mm long extruded aluminium tower bolts, three nos 100mm long medium weight MS butt hinges, two nos 150mm long extruded aluminium handles, one door stopper 140mm long extruded aluminium and one no 300mm long aluminium sliding door bolts and two coats synthetic enamel paint along with one coat of pink primer,complete all as specified and directed. Note : Rate quoted are deemed to be inclusive of fixture and fittings mentioned to each door shutter and painting.
52M&L for 35 mm thick 2nd class hard wood glazed and skelton door shutter, factory made, open rebated and prepared to receive glass/guage etc. (without sash bar) edge of frames plain, chamfered or rounded, fitted with cut & mitred beads for securing glass/guage etc size of member as specified in SSR Part I Section 8 clause 20(a) and fixed to chowkat, (Incl two Nos150mm long extruded aluminium tower bolts, three nos 100mm long medium weight MS butt hinges, two nos 150mm long extruded aluminium handles, one door stopper 140mm long extruded aluminium and one no 300mm long aluminium sliding door bolts and two coats synthetic enamel paint along with one coat of pink primer,complete all as specified and directed. Note : Rate quoted are deemed to be inclusive of fixture and fittings mentioned to each door shutter and painting.complete all as specified.
53M&L 19mm thick MDF boards, grade 1 quality, exterior grade, commercial type, shutter of cupboard/kitchen cupboard /loft board complete all as specified and directed
54S&F L Bihari hinges concealed cabinet hinges in L shape and hydrolic mechanism for soft closing complete all as specified
55Dismantling boarding any description (board/plywood) fixed in any position with screw, complete all as specified
56S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with steel wire staples,complete all as specified and directed
57S&F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement. The door frame shall be fixed to wall using 8/100mm long M.S Screwsthrough the frame by using PVC fasteners. A minimum of 4 nos. of screws to provided for each vertical member & minimum 2 nos. for horizontal member etc.
58S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube,
59S&F single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkhat of size 45x 70 mm comprising of virgin PVC polymer of K value 50-60 (Suspension Grade), calcium carbonate and natural fibers( wood powder/ rice husk/ wheat husk) and non toxic additives ( max toxicity index of 12 for 100 gms) fabricated with meter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr in charge. Note: For WPC solid door/windows frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable variation in profile dimension on plus side shall be acceptable but no extra payment on this account shall be made.
60Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headedcounter sunk S.S screws, all as per direction of Engineering- Charge.(Note: stainless steel butt hinges shall be paid separately under relevant item).
61S&F butt hinges medium weight,cold rolled SS and fixed size of hinge 100mm complete all as specified.
62S&F aluminium alloy handles extruded fabricated type, anodised of 125mm size complete all as specified
63S&F for drappery curtain rode decorative type stainless steel 25mm nominal dia of approved quality (Make-VISTA) (3mm wall thickness) including fixing of two number decorative brackets fixed in brick/concrete wall, two numbers of latto on both ends of curtain rods,complete all as specified and directed by Engr-in-Charge.
64S&F in repairs GI fittings such as union,socket,Tee,Elbow,Nipple, 4\\",6\\", Reducer,Plug,Tank connection of 1/2\\" in existing pipe of 15mm mm dia without taking down of pipe line in any position/situation complete all as specified and directed by Engr-in-Chage.
65Supply & fixing in repair PVC ball valves, high pressure with polyethylene float and fly nut complete screwed for iron pipe 20mm bore complete all as specified & directed. (Make : Prayag / Pearl)
66S&F in repairs GI fittings such as union,socket,Tee,Elbow,Nipple, 4\\",6\\", Reducer,Plug,Tank connection of 3/4\\" in existing pipe of 20mm mm dia without taking down of pipe line in any position/situation complete all as specified and directed by Engr-in-Chage.
67M&L for 8.5mm thick prelam PVC coloured profile panelling with all thicknes of 1.25mm each pannel 250mm wide with interlocking joints,coloured,shade,pattern/design approved fixed to walls or ceiling with solvent/screw including similar pattern moulding at all around at all around of opening,junctions complete all as per manufacturer instruction and all as per specified and directed.
68S&F 4.00mm thick plain sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 sq,m in each pane complete all as specified
69Schedule of Credit Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58645695
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 50 Lakhs
LAST DATE 11-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Welcome Maintenance & Misc B/R Works Of Md Accn Including Internal Periodicals, Joinery, Floor, Plaster And Certain Connected B/R Works Of Old & New Aps Colony And Other Adjoining Areas Of Age B/R-Ii Under Ge(Central) Delhi Cantt
Basic Detail
Tender No GE/TOKEN-137/2026-27
Bidding Type Tender
Location
City New Delhi
State Delhi
Key Dates
Publish Date 20 Nov 2026
Submission Date 11 Dec 2026
Open Date 14 Dec 2026
Finance
Tender Value 50 Lakhs
Tender Fee 500
EMD 1 Lakhs
Exemption Available
Document List
BOQ_897273.xls
d17954b0-039f-4ee0-a277-ff7b6fca7c13.html
Tendernotice_1.pdf
tenderpage.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 20, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 11, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 19 days
Dec 14, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 22 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_897273.xls

html

d17954b0-039f-4ee0-a277-ff7b6fca7c13.html

pdf

Tendernotice_1.pdf

pdf

tenderpage.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender