Defence Statutory Bodies & Commissions/Committees Closing in 20 days TDR #58645681

Tender For Repair/Maint Of Ceiling Fans, Exhaust Fan, Wall Mounted Fan, Air Circulating Fan, Ro And Summer And Cooling Appliances At Bairagarh Under Ge Bhopal

Issued by Statutory Bodies & Commissions/Committees · Bhopal, Madhya Pradesh
Tender Value
35 Lakhs
Estimated cost
Bid Submission
11 Dec 2026
20 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Bhopal → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Repair/Maint Of Ceiling Fans, Exhaust Fan, Wall Mounted Fan, Air Circulating Fan, Ro And Summer And Cooling Appliances At Bairagarh Under Ge Bhopal

BOQ

Name of Work:- REPAIR/MAINT OF CEILING FANS, EXHAUST FAN, WALL MOUNTED FAN, AIR CIRCULATING FAN, RO AND SUMMER AND COOLING APPLIANCES AT BAIRAGARH UNDER GE BHOPAL
Sl. No. Item Description
1Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below.(ii) Amount of Schedule of credit shall be deducted offline
2Attending complaint of fan by deploying electrician for repairing/servicing on site all as specified and directed. Note : 1 Complaint slip will be collected from concerned JE/EM by Supervisor/electrician employed by contractor on every working day and complaints will be attended same day. 2. Room for repair will be provided to contractor in E/M yard for repair of fans. 3. Penalty of Rs. 300/- per day will be charged if complaint slip is not collected by contractor or his rep. 4. Fans with minor defects will be repaired and refixed same day/within 2 working days. Penalty of Rs. 100/- per fan/per day will be charged for delay beyond specified time.5. Fans with major defects will be repaired within 7 working days. Penalty of Rs. 100/- per fan/per day will be charged for delay beyond specified time 6. Repair /Servicing/rewinding and spares will be measured and paid seprately.
3M&L for Repair of ceiling fan any sweep any type, wall fan, exhaust fan any size/ type at site without taking down from wall complete all as specified and directed. Note : spares repair/replaced will be measured and paid separately.
4M & L for taking down and transporting to workshop at E/M yard and re fixing after repair complete all as specified and directed.
5Dismantling ( taken down under item No. 3) ceiling fan AC single phase 230 volts of sizes 1200mm/1400mm any make / model,(BLDC)/Non BLDC dismantling its stator, rotor, servicing , cleaning, including greasing of bearing housing and shaft, reassembling and testing complete all as specified and directed.
6All as per ser item No.4.00 here-in-before but exhaust fan, 380/400/450 mm sweep, AC single phase, 230/240 volts.
7All as per ser item No.4.00 here-in-before but exhaust fan, 250/300 mm sweep, AC single phase, 230/240 volts.
8All as per ser item No.4.00 here-in-before but wall / pedestal fan, of any sweep and capacity
9Dismantling ( taken down under item No. 3) ceiling fan 1200/1400 mm sweep ( any type : BLDC/Non BLDC) repairing, including replacement of spares , reassembling and making the fan fuctional and testing complete all as specified and directed. Note: - Parts replaced will be measured separately
10All as per ser item No.8.00 here-in-before but exhaust fan, 380/400/450 mm sweep, AC single phase, 230/240 volts.
11All as per ser item No.8.00 here-in-before but exhaust fan, 230/ 250/300 mm sweep, AC single phase, 230/240 volts.
12All as per ser item No.8.00 here-in-before but wall / pedestal fan, of any sweep and capacity
13Supply only condenser carrier clip (PVC) in build connector two way fixed with screw on down rod or housing complete all as specified and directed.
14Supply only upper set of clips for down rod with rubber Bush including set of nut bolts and washer, split pin complete all as specified and directed.
15Supply only lower set of clips for down rod with rubber Bush including set of nut bolts and washer, split pin complete all as specified and directed.
16Supply only gun metal bush self lubricated, any size, suitable for ceiling and wall fans complete all as specified and directed
17Supply only Fan condenser 2.5 mfd, 230 volts complete all as specified and directed.
18Supply only Fan condenser 3.15/4.0 mfd, 230 volts complete all as specified and directed.
19Supply only bearing any type for any type of ceiling fan,wall fan, exhaust fan as existing for fixing complete all as specified and directed.
20Supply only body of ceiling fan 1200 mm sweep made of die cast aluminium painted in white colour complete all as specified and directed.
21Supply only set of Canopy(lower and upper) for ceiling fan as per existing complete all as specified and directed.
22Supply only PCB for BLDC ceiling fan as per existing make and model complete all as specified and directed.
23Supply only remote control for BLDC ceiling fan as per existing make and model complete all as specified and directed.
24Supply only pvc insulated multistranded copper conductor cable 1100 Volts three core 23/0.0076 size complete all as specified and directed.
25Supply only plastic body with louvers suitable for 250/300 mm sweep exhaust fan complete all as specified and directed
26Supply only down rod for ceiling fans duly painted with synthetic enameled paint 300 mm long 19 mm outer dia with holes on both ends of the rod for connection wire complete all as specified and directed.
27Supply only down rod for ceiling fans duly painted with synthetic enameled paint 600 mm long19 mm outer dia with holes on both ends of the rod for connection wire replacement complete all as specified and directed.
28Supply only Rotor complete with winding with super enameled copper wire for ceiling fan 1200 mm sweep complete all as specified and directed.
29Supply only metal blade assembly for Exhaust fan duly powder coated suitable for 450 mm/380mm sweep as per existing complete all as directed .
30Supply only Fan blade set of three made MS painted/powder coated in white colour for ceiling fan 1200/1400 mm sweep complete all as specified and directed.
31Supply only Louver assembly for Exhaust fan suitable for 450/380 mm sweep as per existing complete all as directed .
32Supply only fan motor copper wound single phase AC 230 V 50 Hz 1200- 1400 RPM , upto 75 W 250-300 mm sweep exhaust fan complete all as specified and directed.
33Supply only fan motor copper wound single phase AC 230 V, 50 Hz, 1350 to 1400 RPM , 350 to 400 W 380/450 mm sweep exhaust fan complete all as specified and directed.
34Supply only outer frame complete with clamps, rubber packing, nut bolts etc & all accessories duly painted suitable for 450 mm /380 mm sweep exhaust fans complete all as specified and directed.
35Supply only Stator for ceiling fan 1200 mm sweep complete all as specified and directed.
36M&L for resizing by machining/grinding of shaft of any type of fan complete all as specified and directed.
37Dismantling ( taken down under item No. 3) ceiling fan AC single phase 230 volts of sizes 1200mm/1400mm any make / model, dismantling its stator, rotor, cutting out burnt copper winding and providing new winding with super enamelled copper winding wire of existing size including cleaning of slots providing oil impregnated insulation paper or minimax, fibre, insulation in slots and well wraping with cotton tape, binding with cotton thread and varnishing over all with winding varnish, cleaning of bearing housing and shaft, and reassembling and depositing the repaired fan to MES fan store after testing complete all as specified and directed.
38All as per ser item No.36.00 here-in-before but for exhaust fan of 250/300 mm sweep
39All as per ser item No.36.00 here-in-before but for exhaust fan of 380/400/450 mm sweep
40All as per ser item No.36.00 here-in-before but wall / pedestal fan, of any sweep and capacity
41All as per ser item No.36.00 here-in-before but ceiling Fan BLDC type 1200/1400 mm sweep
42M&L for painting of Ceiling fan upto 1200/1400 mm sweep any type with two coats of DUCO paint white colour using spray machine.Spray painting including cleaning, washing and preparation of old painted surfaces including writing MES Nos in all ceiling and Exhaust fan complete all as specified and directed.
43M&L for painting of Exhaust fan upto 280/300/380/450 mm any type with smoke grey paint with two coats of DUCO paint white colour using spray machine.Spray painting including cleaning, washing and preparation of old painted surfaces including writing MES Nos in all ceiling and Exhaust fan complete all as specified and directed.
44S&F ceiling fan regulator 5 step type 240 V, AC 50 Hz single pole, 100 watts complete all as specified and as directed.
45Supply electric insulation tape of size 6M X18MM with good insulation property for insulating open electric connection complete all as specified and directed.
46Material and labour for taking down window type Air Conditioner of 1.5 TR / 2.0 TR, servicing including cleaning completely of cooling coil with hand blower, spraying with soap water solution and finally clean with clear water and refixing at same location with complete testing all as directed by the Engr-in-Charge.
47M&L for dismantling covers of out-door and in-door units of split type Air Conditioner of capacity 1.0TR/1.5TR/2.0TR, servicing including cleaning completely the condenser coil and cooling coil with hand blower, spraying with soap water solution and finally clean with clear water, re-fixing the covers in same position complete as directed by the Engineer-in-Charge.
48M&L for Window type AC of capacity up to 2.0 TR, carrying out pressure leak test by Nitrogen gas pressure for detecting leak in condensing unit refrigerant pipe and repairing the leak by welding or brazing of condensing unit and refrigerant pipe, putting pressure for leak checking after repairs of leak pipe including gas charging as per existing and and transporting & carrying out T&P required at site for the following capacity of ACs, water coolers, refrigerators & deepfreezers all as specified and directed. Note :- The rate under mentioned items included for transpotation of AC to & from work shop as approved by Engr -In -Charge.
49All as per ser item No.48.00 here-in-before but for Split type AC of capacity up to 2.0 TR.
50All as per ser item No.48.00 here-in-before but for Refrigerator of capacity 175 ltrs to 300 ltr
51All as per ser item No.48.00 here-in-before but for Water cooler of capacity 40 Ltr to 80 ltrs
52M&L for taking out of condensing coil fan motor from the AC unit of Window type AC of capacity 1.0 TR/1.5TR/2.0 TR, dismantling, cutting burnt coils, cleaning and rewinding using super enameled copper wire of existing size and gauge including replacement of bush (front and rear) made out of gun metal and reassembling all accessories and testing complete all as directed for the following :-
53All as per ser item No.52.00 here-in-before but for Split type AC of capacity 1.0 TR/1.5TR/2.0 TR
54All as per ser item No.52.00 here-in-before but for Water cooler of capacity 40 Ltr to 120 ltrs
55All as per ser item No.52.00 here-in-before but forDeepfreezer of capacity upto 410 ltrs
56Labour, tools & mechinaries for collecting the complaints of various units etc pertains to split/window type ACs/Water cooler/Water dispensor/Deep Freezer/Regrigerator of any capacity/make from concern JE E/M and attendending these at site to asses the actual fault after opening of ACs including water leakage repair and fixing only spares required to make it fully functional and carry out servicing of servicing in all respect and handing over the report duly signed by the user by name to concern JE all as directed. (Spare parts shall be measured and paid separately under following items as supply only) Note :- The rate under mentioned items included for transpotation of any type of ACs to & from work shop as approved by Engr -In -Charge.
57Supply only Running capacitor 50 mfd
58Supply only Running Capacitor 4/6 mfd
59Supply only Coppr capillary Tube as per existing size.
60Supply only Filter strainer
61Supply only Air filter made of plastic frame and nylon net for Indoor Ac
62Supply only indoor unit Temparature censor for split type AC
63Supply only outdoor unit temparature censor for split type AC.
64Supply only Running capacitor 50 Mfd + 6 Mfd up to 2 ton split type AC
65Supply only Blower motor for window/Split Type AC upto 2 Ton capacity as per existing
66Supply only Remote suitable for window/Split AC
67Supply only Front grill for window AC as per existing
68Supply only PCB Board for Window/split type AC
69Supply only PCB Board for inverter type split AC
70Supply only Rubber bushing for blower motor
71Supply only Swing motor for split type AC of capacity 1.0 TR/1.5TR/2.0TR.
72Supply only Display assembly for spilit type AC
73Supply only Tempertaure sensor for window AC.
74Supply only Copper tube cooling/condensor coil 5/8 inch with proper insulation
75Supply only Copper tube cooling/condensor coil 1/2 inch with proper insulation
76Supply only Copper tube cooling/condensor coil 1/4 inch with proper insulation
77Supply only Fan blade set as per existing
78Supply only Fan motor 1/5 HP, single phase, 240 volts (as per existing)
79Supply only Fan capacitor of capacity 3/4/5 mfd, 230 volt, ISI marked .
80Supply only Pencil battery for ACs remotes of size AAA, 1.5 V (Set of two)
81Suuply only Overload Protector for ACs/Refrigerator/Deep freezer/Water cooler suitable to existing one etc complete all as specified and directed
82S & F in replacement hermitically sealed / Rotary type compressor of Capacity 1.5/2.0 TR as per requirement at site for Window/Split Air conditioner complete all as specified and directed by Engr-in-Charge.
83S&F of new compressor for deep freezer of capacity 300 ltrs to 400Ltrs including jointing capillary tubes and testing the compressor complete all as specified and directed.
84Charging of refrigerant gas R-22/R-32/R-134a for deep freezer /refrigerator/water cooler through refrigerant pipe line, copper pipe, etc and testing complete all as specified and directed.
85Removing the unserviceable compressor sealed unit of any make from water cooler capacity 40/80 liters after cutting copper tubing without any damage to existing parts and S & F for replacing new compressor of same make or suitable to existing one with erection of compressor on base with suitable capillary, filter, etc jointing of copper refrigerant pipe line, charging gas to required level, complete including cleaning of fins, leakage testing, etc including testing for smooth functioning complete all as specified and as directed..
86M&L for removing the condenser fan motor from water cooler of 40/80 ltrs capacity, rewinding the same with super enameled copper wire as per existing gauge and varnishing complete with “E” class varnish, including replacement of gun metal bush, side rubber packing and re-fixing of motor in original position with washer nuts and bolts complete all as specified and directed
87S&F in repairs fan blade suitable for water cooler of capacity 40/80 Litres complete all as specified and as directed.
88S&F in repairs thermostate suitable for water cooler of any capacity complete all as specified and as directed. [Make: Danfoss / Indfoss or equivalent as approved by GE]
89M&L for servicing of Deep freezer of capacity upto 410 ltrs of any make, checking / testing all parts for its serviceability, oiling / greasing of condenser motor including replacing bushes / rubber packing / gasket and insulating material and including repairing door and replacing handle, hinges, nut, bolts, washers etc, checking of refrigerant standing pressure and tapping of refrigerant up to the required level complete including testing for smooth functioning complete all as specified and as directed.
90S&F in repairs condensing coil suitable for Deep freezer of capacity upto 410 ltrs complete all as specified and as directed.
91M & L for shifting of air conditioner split type of any make from its original position to another position with and including making good of existing surface/wall etc and making new drilling in walls and fixing factory made outdoor unit stand etc and and required electric work after disconencting the same if required , locking of gas and vacumming of coil while installation complete all as specified and directed.Note:- Copper tube and Outdoor unit stand shall be paid and meausred seperately
92S & F Starting relay suitable for 1.0 /1.5 /2.0 TR compressor. Make: HI-tech/Classic or as per recommended by manufacturer or equivalent as approved by GE.
93Transporting refrigerator of any make and capacity from MES Store Yard/site to contactor’s workshop for carrying out necessary repair as mentioned in respective item including replacement of un-serviceable spares parts and re-fixing at various locations/MES store yard after repairing complete all as specified and directed. NOTE:- All spares such as compressor, fan motor, relay, capacitor, over load, etc shall be measured and paid separately as supply only.
94M&L for cutting and removing unserviceable freezer unit of refrigerator capacity 165 to 310 litres of any make, and S&F new freezer unit with door and chiller tray including jointing, brazing, recharging of refrigerant gas and testing for smooth functioning complete all as specified and as directed.
95S&F in repairs thermostat suitable for refrigerator 165 to 310 liters capacity complete all as specified and as directed.[Make: Danfoss / Indfoss or equivalent as approved by GE]
96Removing the unserviceable compressor sealed unit of refrigerator of capacity 165 to 310 liters of any make and M&L for replacing the compressor with new compressor of same make & model complete, installing in original position with all accessories like relay with Over Load Protector, filter & recharging of refrigerant complete including testing for smooth functioning complete all as specified and as directed.
97Labour, tools & machinaries for collecting the complaints of various units etc pertains to Desert Cooler of any capacity/make from concern JE E/M and attendending these at site to asses the actual fault after opening of Coolers including water leakage repair and fixing only spares required to make it fully functional in all respect and handing over the report duly signed by the user by name to concern JE all as directed. Note :- (i) The rate under mentioned items included for transpotation of any type of Coolers to & from work shop as approved by Engr -In -Charge. (ii) Spare parts shall be measured and paid separately under following items as supply only.
98M&L for taking out fan motor single phase 230 Volts, 1400 RPM, 3 speed 1/8 HP from desert cooler and rewinding the same with supper enamelled copper wire as per existing gauge and varnishing complete with “E” class varnish, including replacement of gun metal bushes and reassembling and fixing in position complete all as specified and as directed.
99S&F in repairs desert cooler motor of three speed, ISI marked, 1400 RPM, single phase,copper wounded motor with ring, side legs, necessary bolts and nuts of capacity 1/8 HP complete all as specified and as directed. [Make : Usha/ C&G/ Khaithan or equivalent as approved by GE]
100S&F in replacement complete body of desert cooler alongwith water tank of 22 gauge suitable for coolers(except side shutters ) of any capacity suitable to existing one complete all as specified and as directed.
101S&F in repairs side shutter (Set of three) made out from 0.80 mm thick galvanised iron sheet suitable for 4000 Cum / hrs capacity desert cooler complete all as specified and as directed.
102S&F in repairs front grill / louvers to desert cooler made out from 0.8 mm thick GI sheet suitable for 5000 /4000 Cum / hrs capacity desert cooler of any make complete all as specified and as directed..
103S&F in repairs PVC flexible pipe 16 mm outer dia with bends for desert cooler complete with PVC elbow complete all as specified and as directed.
104S&F in repairs selector switches three way, 230 Volts single phase of standard quality fixed in desert coolers complete all as specified and as directed.
105S&F in repairs wood pad (Set of three), minimum weight 0.8 Kg, fixed in side panels of desert coolers complete all as specified and as directed.
106S&F in repairs sumbersible pump 230 Volts, 1/60 HP, ISI Marked for desert cooler including pump support plate fabricated with 0.4 mm thick GI sheet with fixing screws, nuts and bolts complete all as specified and as directed. [Make : Khaitan/Polar/GEC or equivalent as approved by GE]
107S&F in repairs capacitor 4 MFD for fan motor of desert cooler complete all as specified and as directed.[Make:-EPCOS / SYSCAP / ASIAN or equivalent as approved by GE]
108S&F in repairs MS fan blade powder coated for fan motor of desert cooler 380/450mm sweep complete all as specified and as directed.
109S&F in replacement new supporting legs as per existing size of fan motor and fixed with screws complete all as specified and directed
110S & fix outdoor stand made of MS and fixing on wall with MS fastners for Split AC 1.5/2 TR including taking down existing one complete all as specified and directed
111S&F in replacement complete water tank of 22 gauge suitable for coolers of any capacity suitable to existing one complete all as specified and as directed.
112M&L for servicing/ maintenance of reverse osmosis (RO) upto 25ltr per hour capapcity with and including repair work as required, renewal/ replacement of all filters (except membrane) , repalcement of primary filter and defective spare parts if required for its smooth functional complete all as specified and directed.
113S&F membrane of RO suitable to existing one complete all as specified and directed
114Labour, tools & machinaries for cleaning of the water Cooler of any capacity/make from concern JE E/M and attendending these at site to by opening of Coolers including water leakage repair and replacement of float valves and rubber gasket if required in all respect and handing over the report duly signed by the user by name to concern JE all as directed. Note : (Float valves and rubber gaskit included in the item rate)
115S & Fix stainless steel tap of water cooler as per existing one complete all as specifed and directed
116M&L for MS Square Pipes /mild steel framed work for made of angle iron with and including mild steel sheet as required/Nut bolt washers etc including necessary welding, cutting, hinges, locking arrangments including painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
117S&F of freezer door/Trays etc for refrigerator of capacity upto 310 ltrs suitable to existing make complete all as specified and directed.
118S & F copper condensing coil of refrigeraor of capacity upto 310 Ltrs suitable to existine make complete all as specified and directed.
119S & F copper condensing coil of water dispensor of upto 30 Ltr capacity suitable to existing make complete all as specified and directed.
120S & fix compressor for water dispnensor of upto 30 Ltr capacity suiatble to existing make complete all as specified and directed.
121S & fix refrigetaor evapotrator freezer coil upto 310 Ltr capaicity suitable to existing one and make complete all as specified asnd directed
122Deduct Schedule of credit (calculation will be done off line) Rs. 227390.00 Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58645681
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 35 Lakhs
LAST DATE 11-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Repair/Maint Of Ceiling Fans, Exhaust Fan, Wall Mounted Fan, Air Circulating Fan, Ro And Summer And Cooling Appliances At Bairagarh Under Ge Bhopal
Basic Detail
Tender No 8714/E8
Bidding Type Tender
Location
City Bhopal
State Madhya Pradesh
Key Dates
Publish Date 20 Nov 2026
Submission Date 11 Dec 2026
Open Date 14 Dec 2026
Finance
Tender Value 35 Lakhs
Tender Fee 500
EMD 70000
Exemption Available
Document List
84eb6578-a0e9-42dd-87bf-68f3eef8c8f3.html
BOQ_897150.xls
credit8714.pdf
Tendernotice_1.pdf
TENDER_DOCU_8714.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 20, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 11, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 20 days
Dec 14, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 23 days

Tender Documents

Download All (ZIP) ↓
html

84eb6578-a0e9-42dd-87bf-68f3eef8c8f3.html

xls

BOQ_897150.xls

pdf

credit8714.pdf

pdf

Tendernotice_1.pdf

pdf

TENDER_DOCU_8714.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender