Tender For special Repair To Or Govt Md Accn (Block No P-123) At Dbn Vihar In repair of 181 & 203 Pet Pl Asc And Roof Of Building No T-10 Gym Of Army Hockey Node And Unit Run Canteen At 7011 Eme Bn Under Ge (East) Jalandhar Cantt (Tender Id No 2026_M
Tender Overview
Project Description
Tender for special Repair To Or Govt Md Accn (Block No P-123) At Dbn Vihar In repair of 181 & 203 Pet Pl Asc And Roof Of Building No T-10 Gym Of Army Hockey Node And Unit Run Canteen At 7011 Eme Bn Under Ge (East) Jalandhar Cantt (Tender Id No 2026_Mes_799570 _1)
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of brick tiles single layer as in roof covering, complete all as directed by Engr-in-charge. |
| 2 | Demolition of mud in roofs any thickness including plastering and leeping(whether full thickness removed or only a part thereof), complete all as directed by Engr-in-charge. |
| 3 | M&L for PCC (1:2:4) type B-0 (using 12.5 mm graded crushed stone aggregate) as in benching, roof padding, roof kerbs or mud stops, coping etc rounded or chamfered on edges, complete all as specified and as directed. |
| 4 | M&L Cutting out cracks to V-section in existing RCC roof slabs or terracing , cleaning out & filling solidly with a hot mixture of bitumen and clean dry sand 1:1 ( by weight), complete all as specified and as directed. |
| 5 | M&L 10mm thick cement plaster in cement mortar (1:3) on concrete roof surfaces finished even and fair, including cleaning the roof top by water etc, complete all as specified and as directed. |
| 6 | Cleaning the surface and made free of dirt, foreign particle, laitance followed by grinding all all protrusion to make surface modulated. Thereafter, inspection for cracks on the surface caused by thermal expiation contraction. Cutting the grooves with suitable cutter machine in V groove filled with repairs mortar/ microconcrate / general purpose grout as recommended proportionally as per recommendation of manufacture. Making of Gollas at all the corners with polymer modified mortar (1:4) cement sand with 3.5% acylic of cement weight, complete all as directed by Engr-in-charge. |
| 7 | Supply and applying high build elastomeric waterproofing coating based on pure hydrophobic polyurethane cold appliId of spray/brush applied, membrane with an elongation of 280% and tensile strength of 2.7N/mm2 as per ASTM D 2370, crack bridging ability of 3mm, no leakage upto 5 bars of water pressure as per DIN 1048, min 88% solid content. The system includes final base preparation, epoxy primer 1:1 (Resin; harder) application with 100% water dilution and Pure polyurethane application in 2 coats with a total min consumption of 1.25 kg per Sqm incl fiber mesh Application should be done with Graco sprayer by a company authorised applicator ”, complete all as specified and as directed. |
| 8 | M&L Galvanised iron water tubing 15 mm bore, medium grade with & including all fittings fixed to wall, ceilings and or laid in floors etc including taking down the existing tubing, complete all as specified and as directed. |
| 9 | M&L Galvanised iron water tubing 20 mm bore, medium grade with & including all fittings fixed to wall, ceilings and or laid in floors etc including taking down the existing tubing, complete all as specified and as directed. |
| 10 | S&F for 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed. |
| 11 | S&F 500 ltr rotational moulded polythylene water storage tank (Cylindrical vertical with closed top) hosted and fixed in position incl dismantling of existing tank of any description, complete all as specified and as directed.ISI marked. |
| 12 | S&F 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight-210gms.), complete all as specified and as directed. |
| 13 | Demolition of brick work built in cement mortar incl all quions, arches pillars etc but excludding precast concrete articles, complete all as directed by Engr-in-charge. |
| 14 | M&L for brick work with sub class 'B' old size bricks straight or curved on plan exc 6 M mean radius built in CM (1:6), complete all as specified and as directed. |
| 15 | M&L for half Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in in CM 1:4 |
| 16 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc and removing surplus spoil out of Defence Land where directed at a level not exc 1.5 m above the starting point all, complete all as specified and as directed. |
| 17 | M&L for 15 mm thick cement mortar 1:6 on brick or concrete surface finished even and smooth without using extra cement all, complete all as specified and as directed. |
| 18 | M&L 15mm thick cement plaster in cement mortar 1:4 on external surface brick or concrete surface finished even and fair all, complete all as specified and as directed. |
| 19 | M&L Plastering 5mm thick in cement mortar (1:3) finished even and smooth without using extra cement as on ceiling, complete all as specified and as directed. |
| 20 | M&L for prepration of new surfaces of walls including cornices, plasters etc (Plastered or unplastered surfaces) and applying two coats of cement base paint over a coat of primer. |
| 21 | M&L for three coats of white wash on newly plastered surfaces of ceiling including preparation of surfaces all, complete all as specified and as directed. |
| 22 | M&L for two coat of OBD on new plastered surfaces over chalk whitening incl preparation of wall surfaces |
| 23 | M&L complete removal of the existing tratement on walls for Preparation of wall surfaces by scrapping (any No of layers), rubbing down, washing, etc as directed and apply two coats of cement base paint all as directed and specified. |
| 24 | M&L complete removal of the existing tratement on walls for Preparation of wall surfaces by scrapping (any No of layers), rubbing down, washing, etc as directed and apply a uniform layer of wall care putty as approved after that let the surface dry then apply two coats of oil bound distemper white or tinted all as directed and specified. |
| 25 | M&L for prepration of old surfaces of walls including scraping down smoke soots, moulds, moss and trading oil and greasy spots etc including cornices, pilasters etc( Plastered or un plastered surfaces) and applying two coat of white (lime) wash on ceiling, complete all as specified and as directed. and directed by Engr -in-charge. |
| 26 | Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing) and disposal of rubbish outside MD land, complete all as directed by Engr-in-charge. |
| 27 | M&L for coloured glazed tiles (premium quality) of size 300x450x6 - 7 mm thick fixed with neat cement slurry in vertical surface to wall pointing in white/coloured cement to match over and including 10mm thick rendering in CM 1:4, complete all as specified and as directed. |
| 28 | M&L for non-skid ceramic coloured tiles(premium quality) 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors set and jointed in neat cement slurry and pointed in while or colored cement to match over and incl 15mm thick bedding layer CM 1:6 in roughening of old concrete floor surfaces by picking, sweeping clean and washing down with water to remove dust inc brushing neat cement slurry with 3 kg/sqm, complete all as specified and as directed. |
| 29 | Ditto all as per item No 28.00 above, but in skirting and 10mm thick rendering as backing coat of CM 1:4, complete all as specified and as directed. |
| 30 | M&L for Non-skid ceramic coloured tiles (premium quality) 7 to 8mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors set and jointed in neat cement slurry and pointed in while or colored cement to match over and incl 15mm thick bedding layer CM 1:6 in roughening of old concrete floor surfaces by picking, sweeping clean and washing down with water to remove dust inc brushing neat cement slurry with 3 kg/sqm, complete all as specified and as directed. |
| 31 | Ditto all as per item No 30.00 above, but in skirting and 10mm thick rendering as backing coat of CM 1:4 |
| 32 | M&L for 20 to 25mm thick machine cut kota stone slab in single peice size in treader & landings of stair cases including rounding to edge,over including brushing neat cement slurry with 3 kg/sqm with pigments to match the shade of slab including cutting, rubbing and mirror/granite finish polished, complete all as specified and as directed. |
| 33 | Ditto all as per item No 32 above but on vertical surfaces such as riser, skirting, dudo, etc over and incl 10mm thick cement plaster in CM 1:4 rough finisher surface to receive tiles |
| 34 | S&F 18 to 20mm thick granite (of any type) tiles machine cut , in skirting/dado laid over cement screed 15 mm thick in CM 1:6 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete |
| 35 | Dismantling of cast iron/PVC or reinforced concrete drain pipes, jointed in cement mortor anf taking out of trenches if required 100/75/40 mm internal dia pipe, complete all as specified and as directed. |
| 36 | S&F PVC (SWR) pipes of dia 110mm bore single socketed in any length with rubber ring joints fixed to walls/in trenches, complete all as specified and as directed. |
| 37 | S&F PVC (SWR) pipe of 75 mm bore in single socketed in any length with rubber ring joints fixed to walls, complete all as specified and as directed. |
| 38 | S&F PVC (SWR) bends of 110 mm dia bore, complete all as specified and as directed. |
| 39 | S&F PVC(SWR) vent cowl of 75mm dia bore, complete all as specified and as directed. |
| 40 | M&L PVC Nahani trap 75mm size with grating including jointing to waste pipe fixed in cement concrete type type B1 (1:2:4), complete all as specified and as directed. |
| 41 | S&F in repairs Wash basin wall hung with half pedestal 550x400 mm as per CERA -CAT No. S2040105 wash basin and Cat No S2090102 Half pedestal including waste pipe connections and pillar tap, complete all as specified and as directed. |
| 42 | S&F 600X450mm approved quality ready made cabinet mirror of selected quality glass, fixed in PVC frame alround and 02 No's hanging clips and fixed to wooden plugs with CP brass screws and cup washers, complete all as specified and as directed. |
| 43 | S&F in repairs Vitreous china wash down water closet pan (padestal pattern), white (excluding fixing bolts,flushing cistern) incl seat cover and flushung pipe for pedestal pipe etc., complete all as specified and as directed. and directed . |
| 44 | S&F in repair seat cover for water closet pedestal pattern all, complete all as specified and as directed. |
| 45 | S&F PVC valveless, syphonic action type flushing cistern low level white with inlet ball valve float and handle, 10 ltr capacity including brakets fixed in repairs, complete all as specified and as directed. |
| 46 | PVC connection fiber, reinforced 45cm long with brass check nut and PVC washers at both ends complete fixed in repair, complete all as specified and as directed. |
| 47 | S&F in repair for Chromium plated jet for EWC 600mm long tube superior quality all, complete all as specified and as directed. |
| 48 | S&F in repair Bib taps 15 mm dia, fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed for 15 mm dia pipe. |
| 49 | S&F in repair Stop valves 15 mm dia, fancy type chromium plated, screwed down, high pressure, screwed both ends for 15mm dia pipe or for unions fixed in repairs |
| 50 | S&F in Fancy Wall Mixer 3-in-1 with provision for both Over Head Shower and Hand Shower complete with 115mm long bend Pipe, connecting legs & wall flange of makes of Make Jaquar Cat No FLR-5281N or Kohler suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed. |
| 51 | S&F for corner glass shelf 300mm (with brass brackets) and fixed to wooden plug with chromium plated brass screw and cup washers, sample approved by Engr -in-charge, complete all as specified and as directed. |
| 52 | S&F Brass chromium plated overhead shower rose 120 mm dia with 3 flow with swivel joint, including shower arm, fixing to steel pipe or union including taking down old shower rose complete all as directed and specified by Engr- in- Charge. Make Cera shower rose F7020305 shower arm F7040104 or equivalent in Hindware/ Parryware, complete all as specified and as directed. |
| 53 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect, complete all as specified and as directed. |
| 54 | S&F PVC flexible waste pipe of length n exc 1m and dia 32/40mm fixed to wash basins. |
| 55 | S&F Stainless steel soap dish, white of size 160X160X90 mm as approved fixed with brass screws or embedded in wall . Make : Cera Cat No. F5003106 or equivalent in other makes, complete all as specified and as directed. |
| 56 | Towel rail brass chromium plated fancy type 60cm long including bracket fixed between flanges complete Make: Cera Cat No. F5007103 or equivalent in Hindware/ Parryware, complete all as specified and as directed. |
| 57 | S&F Aluminium (extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed in repair, complete all as specified and as directed. |
| 58 | S&F HDF board, 18/19mm th exterior grade, prelaminated both side decorative face lamination fixed with screws, brackets to timber frame work with and including 2nd class hard wood, 6mm th all around edging, complete all as specified and as directed. |
| 59 | S&F 125mm Aluminium haps and staples safety type with mild steel hinge pin including bolt to hinge plate and fixed with screw, complete all as specified and as directed. |
| 60 | S&F Mild steel bright finish continuous (piano) hinges width of flaps (when open) in 30mm complete all as specifed and directed |
| 61 | S&F 75 mm length extruded aluminium alloy handles,fabricated type, anodised, complete all as specified and as directed. |
| 62 | S&F aluminium Hat and coat hooks, solid body, 175mm to 250 mm, complete all as specified and as directed. |
| 63 | S&F Harrison rails, aluminum anodised, chromium plated with fixing brackets, stops, rollers etc, complete all as specified and as directed. |
| 64 | S&F Powder coated aluminium alloy curtain rod of any size including fancy type brakets, complete all as specified and as directed. |
| 65 | Stainless steel sink, 1.00mm thick for kitchen with drainage board with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm, complete all as specified and as directed. |
| 66 | S&F in repair Stainless steel kitchen plate rack of superior quality size 31\\" x 36\\" 10\\" and fixed to wooden plug with chromium plated brass screws and cup washers all, complete all as specified and as directed. and directed |
| 67 | S&F brass chromium plated tubular towel rail 20 mm dia , D type 60 cm long between CP flanges all, complete all as specified and as directed. |
| 68 | Taking down chowkats or frames N.exc 1.5 Sqm with shutter (without taking of shutter from the frame, complete all as directed by Engr-in-charge. |
| 69 | Taking down existing door/window/ventilators (without taking off shutters and guard bars) of exc 1.5 Sqm and n.exc 4.00m with shutter, complete all as specified and as directed. and as directed incl stacking the materials properly, complete all as directed by Engr-in-charge. |
| 70 | M&L for powder coated aluminium three track, three shutters (of equal width), sliding type windows without sash bars including necessary jointing clips, rubber packing, neoprene rubber gasket, aluminium snap beading, screws, aluminium fittings, handles, locking arrangement (star lock), bearings (two No's for each sliding shutters) with 4.00mm sheet glass for glazed including following powder coated sections as given in 'JINDAL' catalogue, complete all as specified and as directed. and as directed :- (i) Frame (Bottom) -20619 (ii) Frame (Top & Side)-20681 (iii) Shutter vertical (Handle lock)-20846. (iv) Shutter vertical (Int lock)-20845. (v) Shutter (Top)-20844. (vi) Shutter (Bottom)-20847. Note :-(i) The window opening shall be provided with four shutters of equal width.(ii) The shutters shall be placed in such a manner that at a time the entire width of window can be utilized as fully glazed window. (iii) The thickness of the powder coating shall not be less than 0.5 micron & the tint shall be as decided by GE. |
| 71 | S&F Aluminium powder coated ventilator partly fixed and partly louvered type without sash of bars, section as per designation 63400 of IS 737, frame and intermediate made out of aluminium section of size 50.80 x 25.40 x 0.95 mm (Catalogue No 14027 of M/s Jindal) including necessary heavy duty louvers (adjustable with locking arrangements), jointing clips, rubber packing, anodised snap beading, screws alongwith 4.00mm thick pin headed glass for louvers and glazing etc, complete all as specified and as directed.Note:- The thickness of the powder coating shall not be less than 0.5 micron & the tint shall be as decided by GE. |
| 72 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made, complete all as specified and as directed. |
| 73 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 74 | S&F 30mm thick \\"RAJSHRI\\" BRAND FACTORY MADE WIRE MESH SOLID WPC DOOR SHUTTER consisting of Density 500 Kg /Cum Manufactured by an ISO-9001-2015 certified Company , Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (confirming as per IS:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. M.S powder coated butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube.Other hardwares should be fixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in -charge, manufacturer's specification & drawings. |
| 75 | S&F 100 mm size Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, typeB-11, complete all as specified and as directed. |
| 76 | S&F Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed 150mm long, complete all as specified and as directed. |
| 77 | S&F 200mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed, complete all as specified and as directed. |
| 78 | S&F 100mm Extruded brass handles, fabricated type polished, complete all as specified and as directed. |
| 79 | Surface excavation n.exc(not exceeding) 30 cmdeep and averaging 15cmdeep and getting out hard dense soil, complete all as directed by Engr-in-charge. |
| 80 | Removal excavated surplus soil to a distance n.exc. 50 m and depositing where directed at level n.exc. 1.5 m above the starting point, complete all as directed by Engr-in-charge. |
| 81 | M&L for hardcore of gauge n exc 63 deposited, spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface, complete all as specified and as directed. |
| 82 | M&L cement concrete 1;4:8 type D2 (using 40mm graded curshed stone aggregate) 75 mm thick as in sub base , complete all as specified and as directed. |
| 83 | M&L for 50 mm sand cushioning under interlocking in floors including watering and consolidation, complete all as specified and as directed. |
| 84 | M&L for Machine pressed precast concrete interlocking paver block rubber moulded, vibrated coated, glossy finishe any shape & size confirming to IS 15658-2006 of 60 mm thickness, M-35 with grey cement and pigment grade all, complete all as specified and as directed. |
| 85 | M&L for filleting in any position and to any shape in cement mortar 1:4 including all mitres, stops etc section of fillet exc 25 but n.exc 50 Sqcm, complete all as specified and as directed. |
| 86 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as directed by Engr-in-charge. |
| 87 | Dismantling structural steel works as in grills, doors ,gates etc, complete all as directed by Engr-in-charge. |
| 88 | M&L Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates etc confirming to Fe-410W (Gde E-250) quality -A grade, complete all as specified and as directed. and directed |
| 89 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed. |
| 90 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed. |
| 91 | S&F MSA Flat wind ties for roof including securing bolts, posts and struts including all necessary drilling bolt or riveting etc and similar work confirming to FE-290 Gde E-165. |
| 92 | M&L preparation of new steel surfaces of any descriplain, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide chrome primer all, complete all as specified and as directed. |
| 93 | Dismantling wall and ceiling boards any type, any thickness and any shape including cover fillets and frame work., complete all as specified and as directed. and directed . |
| 94 | S&F 4mm thick Non Asbestos (E-Board) designer tiles (Electra) suitably fixed in false ceiling grid/frame with staples or screws, complete all as specified and as directed. and as directed |
| 95 | S&F Powder coated aluminium snap grid frame work of size 605x605mm for false ceiling all, complete all as specified and as directed. in repair |
| 96 | M&L for Rendering 15 mm thick on fair/unfair faces of brick work or concrete surfaces in CM 1:4 and to be finished even and smooth ( without using extra lime or cement) including WPC @ 200 ml per 50kg cement Bag or as per manufacture instructions. ;, complete all as specified and as directed. Note : WPC will be measured and paid separately under appropriate items. |
| 97 | Supply only liquid water proofing compound, ISI marked, complete all as specified and as directed. |
| 98 | M&L for preparation of newly plastered surface Finishing walls with water based anti-algal 100% acrylic smooth exterior emulsion having silicon additives in two coats @ 1.79 ltr / 10 sqm diluted with water in 5:2 ratio applied over priming coat with fully automatic airless spray machine having a minimum pressure of 3000 PSI., complete all as specified and as directed. Min Gap between two coats shall be 6-8 Hrs. |
| 99 | M&L for preparation of newly plastered surface applying two coats of acrylic washable distemper @ 1.5 kgs /10 sq mtrs diluted with water in 5:3 ratio applied over primimg coat omplete all, complete all as specified and as directed. Min Gap between two coats shall be 6-8 Hrs. |
| 100 | M&L for complete removal of existing treatment from wall Old plaster/unplaster surface., complete all as specified and as directed. |
| 101 | M&L for applying two coats of acrylic washable distemper @ 1.5 kgs /10 sq mtrs diluted with water in 5:3 ratio applied over primimg coat, complete all as specified and as directed. |
| 102 | M&L for Finishing walls with water based anti-algal 100% acrylic smooth two coats of exterior emulsion having silicon additives @ 1.79 ltr / 10 sqm diluted with water in 5:2 ratio applied over priming coat, complete all as specified and as directed. |
| 103 | M&L for preparation of old painted steel surfaces of any description, exceeding 10 CM width or grith and applying one coat of synthetic enamel paint complete all as specifed and directed. |
| 104 | M&L for repairing of RCC projection, chajjas, facia,bands, shelves, beams, RCC railing, balcony and similar works by dismantling of loose/ disintegrated portion RCC at any height and in any sitution floor (including provn of support, with chicken wire mesh and dubbing/ filling with PCC (1:2:4), type B-0, using 12.5 mm graded crushed stone aggregate,15 to 25 mm thick after applying cement slurry @ 3 kg/sqm, finished even and smooth to desired shape, complete all as specified and as directed. |
| 105 | Taking down carefully existing point wiring of any type/ any size (ie on wooden/ batten, surface conduit, casing capping or concealed conduit) complete for unsv light, socket or power point etc including removing switches, sockets, holders, ceiling rose, pendants, regulators, light fittings, switch board outlets with sheets and other materials from site for refixing of serviceable light, accessories for taking credit of unserviceable light and accessories as per Sch of credit and making good disturbed surface of walls,roof, floors etc. with any type of civil wk involved, complete all as specified and as directed. |
| 106 | M&L for point wiring with modular accessories for light point with 1.5 Sqmm (nominal area) FRLS PVC insulated unsheathed multi stranded copper conductor of size 1.5 Sqmm cable drawn in and including concealed rigid PVC conduit medium grade not less than 20mm dia with accessories including cutting chases for laying of conduit /fixing of boxes in walls/floor etc including making good to disturbed surfaces as per adjoining specification and terminated in and incl sunken pressed steel modular boxes(1.6 mm thick sheet and min 50 mm deep) with suitable modules white cover plate fixed with nickel polished screws etc including FRLS PVC insulated unsheathed multi stranded copper conductor 1.5 Sqmm single core as earth continuity conductor (green colour) connected with earth dolly with thimble, complete all as specified and as directed. and as directed by Engineer-in-Charge |
| 107 | Ditto all as per item No. 106.00 above, but for one fan point controlled by one switch, complete all as specified and as directed. |
| 108 | Ditto all as per item No. 106.00 above, but for one socket outlet 5 Amps on independent board, complete all as specified and as directed. |
| 109 | Ditto all as per item No. 106.00 above, but for one socket outlet 5 Amps on the same board controlled, complete all as specified and as directed. |
| 110 | Ditto all as per item No. 106.00 above, but for one bell point controlled by one bell push, complete all as specified and as directed. |
| 111 | Ditto all as per item No. 106.00 above, but for one light point controlled by two way switches, complete all as specified and as directed. |
| 112 | Ditto all as per item No. 106.00 above, but with 2.5 Sqmm (nominal area) FRLS PVC insulated unsheathed multistranded copper conductor cable for one 3 Pin 15 Amp socket on independent board including one 2.5 Sqmm copper conductor multi stranded green colour PVC insulated unsheathed FRLS cable 1100 volts grade as earth wire connected to common earth and earth dolly with all accessories, complete all as specified and as directed. |
| 113 | S&F Modular switch, 6 Amps, 240 Volt AC single pole, one way, complete all as specified and as directed. |
| 114 | S&F Modular switch, 16 Amps, 240 Volt AC single pole, one way, complete all as specified and as directed. |
| 115 | S&F Modular socket out let 6 Amp, 5 pin, 2-in-1 flush type, complete all as specified and as directed. |
| 116 | S&F Modular socket outlet multi purpose 2 in 1, 5/6 pin, 6 & 16 Amps, flush type, complete all as specified and as directed. |
| 117 | S&F Modular switch, 6 Amps, 240 Volt AC single pole, two way, complete all as specified and as directed. |
| 118 | S&F ceiling rose surface type PVC/ polycarbonate 65mm x 50mm three terminal, complete all as specified and as directed. |
| 119 | M&L in replacement Bell electric AC (Ding Dong) 240 volt SP, complete all as specified and as directed. |
| 120 | M&L in replacement Modular Bell push 6 Amp 1 module, 240 volts, complete all as specified and as directed. all, complete all as specified and as directed. by Engineer-in-Charge. |
| 121 | S&F 2 Module five step fan regulator, electronic type, single phase, including connection, complete all as specified and as directed. |
| 122 | S&F indoor Decorative light, wall mounting, Metal, glass Chrome ,220-240 V with B22 LED Bulb of 12 watts warm white and holder, complete all as specified and as directed. and directed by engr-in-charge. |
| 123 | S&F LED lights fitting 1x 20 Watt, 220V AC decorative box type frame with holder including LED tube rod 20 watt connecting up single/ double connections with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 124 | S&F energy saving & environmental friendly long life versatile pressure die-cast aluminium housing luminaire with heat resistant glass and suitable optics for uniform distribution of light 35 watt LED bldg security lights with high efficiency electronic driver BIS approved, having IP-66 protection, surge protection operative on AC supply 140 volts to 270 volts pre-wired complete with GI pipe of 25mm bore of suitable length and MS clamp duly painted with two coat Aloxide paint all, complete all as specified and as directed. |
| 125 | S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 amp 240 V 10 KA, complete all as specified and as directed. |
| 126 | M&L for sub main wiring with two run of single core FRLS PVC insulated unsheathed multistranded copper conductor cable of 6.0 Sqmm drawn through in and including new PVC rigid non metallic concealed conduit (medium grade) with all fittings including earth continuity single wire FRLS PVC insulated unsheathed multistranded copper conductor cable 6.0 Sqmm ( green insulation) with any type of civil work including making good to disturbed surfaces to match existing surface, complete all as specified and as directed. NOTE: Two run of 6.0 sqmm wire and one run of 6.0 sqmm wire as earth wire including PVC conduit shall be measured as one unit. |
| 127 | M&L for sub main wiring with two run of single core FRLS PVC insulated unsheathed multistranded copper conductor cable of 4.0 Sqmm drawn through in and including new PVC rigid non metallic concealed conduit (medium grade) with all fittings including earth continuity single wire FRLS PVC insulated unsheathed multistranded copper conductor cable 4.0 Sqmm ( green insulation) with any type of civil work including making good to disturbed surfaces to match existing surface, complete all as specified and as directed. NOTE: Two run of 4.0sqmm wire and one run of 4.0 sqmm wire as earth wire including PVC conduit shall be measured as one unit. |
| 128 | M&L in replacement for sheet metal DB for MCBs, SPN, 12 ways, double door,single phase, with bus bar, neutral bar/ connectors suitable copper thimbles, lugs etc, complete all as specified and as directed. |
| 129 | S&F MCB SP 6 to 32 Amps, 10 KA, B curve, complete all as specified and as directed. and directed by Engr-in-charge. |
| 130 | S&F MCB SPN 40 Amps 240 V, 10 KA, B curve, complete all as specified and as directed. and directed by Engr-in-charge. |
| 131 | M& L for XLPE insulated, PVC sheathed galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 sqmm 4 core complete laid in trenches passing through pipes/culverts/ under roades/ alon wall all, complete all as specified and as directed. |
| 132 | Excavation in trenches not exceeding 1.5m in wide and not exceeding 1.5 m in depth for laying of pipe etc and getting out in soft soil, complete all as directed by Engr-in-charge. |
| 133 | M&L for returning, filling in including spreading leveling watering and well ramming in layers not exc. 25 cm thick, complete all as specified and as directed. |
| 134 | M&L for removing surplus soil to a distance not exc. 50 M and depositing where directed at a level not exceeding 1.5 Mtr above the starting point, complete all as specified and as directed. |
| 135 | M&L for sand cushioning with clean dry sand to cables with layer of sand 8 cm before laying of cable and 15 cm thick after laying of cable, complete all as specified and as directed.Note : For payment purpose punned thickness of 18 cm shall be measured against spread thickness of 23 cm as mentioned in para 19.75 of SSR part-I. |
| 136 | Supply & laying of old size sub class 'B' bricks laid flat in trenches over the cable with the length of brick perpendicular to the direction of cable length, adjacent/abutting each other, complete all as specified and as directed. by Engineer-in-charge. |
| 137 | S&F powder coated sheet metal enclosure indoor type(size width 1200mm,height 1200mm,depth 250mm) made out of 2mm thick CRCA sheet having independent compartments suitable for single phase energy meters and MCB’s provided with front hinged shutters with locking arrangements and clear glass to visualize the meter reading without opening the compartment with sufficient working space in compartment; duly prewired with single core PVC insulated and sheathed FRLS stranded copper conductor wire of suitable size from bus bar to meter compartment 08 Nos duly crimped with copper thimbles, duly powder coated having one number cable gland for suitable size of LT XLPE/ PVC cable entry at bottom, complete all as specified and as directed. and consisting with the following:- (a) Bus bar for 3 phase 4 wire system of 4 x 100 Amps rated insulated copper strip mounted on resin cast insulators in independent compartment having front open able shutter - One Set.(b) MCCB, four pole, 415 volts, 100Amps, 25 KA with adjustable over current and short circuit, inbuilt in stantaneous protection, ICS=ICU=100% including spreader links on both sides-One No.(c) MCB SPN, 40 Amps, 10 KA C-curve-09Nos.(d) Multifunctional meter 0-500 volts with selector switch -one set.(e) Indicator lamps LED in red in red/yellow/ blue colour- One set of Three.(f) Internal wiring of meter / MCB / Cable connector, shall be carried out with 10 Sqmm multicore flexible copper wire with FRLS grade PVC insulation of 1100 volts rating including necessary lugs / nuts / bolts / washers etc.Note:- Existing meters shall be dismantled & re-fixed in panel by contractor and make cable connection properly through LT cable joint with lugs of suitable size rates are deemed to include for the same. |
| 138 | M&L for Earthing complete in replacement with galvanised steel earth plate electrode 60cmx60cmx6.0mm thick burried directly in ground (earth pit not less than 2.25 meters deep below normal ground level with the top edge of electrode not less than 1.5 meters below normal ground level connected to galvanised earth strip 25x4mm by means of bolts, nuts, check nuts and washers of galvanised iron and incl GI lead protection pipe of GI light grade 15mm dia upto 7.5 mtrs and watering pipe 20mm bore of GI medium grade with funnel and wiremesh, earth plate covered on all sides with min 150mm thick alternate layers of charcoal, salt all as shown in electrical plate No 3 of SSR Part-I 2009 connected to earthing point with PCC chamber and RCC cover in 1:2:4 complete with any type of earth work involved all, complete all as specified and as directed. and directed and testing on completion. Note:- PCC Chamber shall be constructed at least 0.50 mtr away from on the earth pit electrode and pipe for watering shall be provided in slanting manner. |
| 139 | S&F angle holder, PVC/Polycarbonate type with back plate suitable for batten fittings, complete all as specified and as directed. and as directed by Engineer-in-Charge.Make: Anchor / Legrand / L&T |
| 140 | S&F exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers (louvers made of powder coated frame having aluminium/ GI sheet flappers) complete including making/ cutting of hole in wall of any thickness and making good to disturbed surface complete incl plastering all, complete all as specified and as directed. |
| 141 | S&F exhaust fan, PVC body AC single Phase. 230V of size 250mm sweep with, blades, and frame and louvers complete including making/ cutting of hole in wall of any thickness and making good to disturbed surface complete incl plastering all, complete all as specified and as directed. |
| 142 | Taking down existing ceiling fan, M&L for preparing old surfaces of ceiling fan of any capacity or sweep, by scrapping and removing dust, new clamp, rubber reel, canopy and suitable hanging arrangement etc and filling cavities with one coat of filler and applying synthetic enamel paint by spraying, complete all as directed by Engr-in-charge. |
| 143 | M&L for cutting of existing PCC surface any type for laying cables/pipes of size 150mm width and upto 150mm depth, complete all as specified and as directed. |
| 144 | Taking down carefully storage type electric water heater (Geyser) of any capacity. carrying out servicing including replacement of various size screws and clamps, base assembly, washers, glands of all types/ valves/drain plug / thermal cut-out / safety valve/ indicator lamp and to ensure water tightness and worn out minor parts including re-fixing in the position after testing, complete all as directed by Engr-in-charge. |
| 145 | S&F in repairs recess mounted LED ceiling light fitting, 600mmx600mm, 35/36w, 230v, 50Hz with diffuser suitable for indoor units complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable fixed on the false ceiling with necessary cutting of false ceiling wherever necessary etc complete all, complete all as specified and as directed. |
| 146 | S&F in repair (concealed flush to wall) factory made DB (made out of CRCA sheet not less than 1.2mm thick, fitted with DIN channel neutral link and 200 Amp rated bus bar) SPN, 8 Way 240V, suitable for mounting MCB/Isolator etc, conforming to IS-13032, DB shall be semi glosy finished with epoxy polyster based powder paint sprayed and backed at high temperature between powder paint process to ensure smooth finish and protection against corrosion atmosphere. The DB shall be double door type with hinged door with locking arrangement, the DBs shall be same make as MCBs, DB shall be provided with level marking indicating the incoming and outgoing circuits on always, complete all as specified and as directed. The DBs shall be of IP-43 protection class, and including making good disturbed surfaces of walls as necessaty, complete all as specified and as directed.Note :- MCB/Isolator etc shall be measured and paid separately under appropriate item of BOQ. |
| 147 | S&F in repair double door, sheet metal enclosure concealed to the wall powder coated MCB DB TPN 4 way with neutral link, earth bar, din rail 415 volts , 200 amps rated bus bar confirming to IS-13032-1991 including taking down unserviceable, complete all as specified and as directed. and as directed by Engineer-in-Charge. |
| 148 | S&F MCB SPN 32 Amps 240 V, 10 KA, B curve as per, complete all as specified and as directed. by Engr-in-charge. |
| 149 | S&F in repairs MCB TPN, 100 Amps, 415 volts,10 KA including taking down old unserviceable complete all, complete all as specified and as directed. and as directed by Engineer-in-Charge. |
| 150 | M&L for electrical meter box with 1mm CRCA sheet for accomodating existing 3 phase electric meter and 4 way TPN Distribution Box concelead on walls, connecting all wires, making good the disturbed surfaces as per existing including brick work, plaster, white wash and paint as per existing, box should have seven way process powder coating to protect from rust including taking down old meter box, complete all as specified and as directed. and directed by Engr-in-Charge.Note : 4 way TPN DB will be paid seperately under relevent items of schedule. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender