Defence Statutory Bodies & Commissions/Committees Closing in 20 days TDR #58645668

Tender For Repairs And Resurfacing Of Road , Culvert, Retaining Wall Of Pocket No 5 And Its Allied Units At Jaisalmer Mil Stnunder Ge (A) Jaisalmer

Issued by Statutory Bodies & Commissions/Committees · Jaisalmer, Rajasthan
Tender Value
47.85 Lakhs
Estimated cost
Bid Submission
12 Dec 2026
20 days left
EMD
96000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Jaisalmer → Rajasthan
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Repairs And Resurfacing Of Road , Culvert, Retaining Wall Of Pocket No 5 And Its Allied Units At Jaisalmer Mil Stnunder Ge (A) Jaisalmer

BOQ

Name of Work:- REPAIRS AND RESURFACING OF ROAD , CULVERT, RETAINING WALL OF POCKET NO 5 AND ITS ALLIED UNITS AT JAISALMER MIL STNUNDER GE (A) JAISALMER
Sl. No. Item Description
1M&L for repair to pot holes of any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth and making good by filling in screened and graded road metal, watering and well ramming (including supply of road metal) complete all as specified and directed by Engineer-in-Charge.
2M & L for Applying evenly a prime coat of Cationic Bitumen Emulsion SS1 confirming to IS: 8887 at a rate of application of 0. 7-1 kg/sqm on surface WMMIVVBM as specified in Table 500-3 of MoRTHspecification for road and bridge works 2013, using mechanical sprayer complete all as specified and directed
3M & L for Premix bituminous macadam of paving bitumen of VG-30 grade with 4% binder content by weight of total mix, any penetration laid /rolled and compacted to required gradient and camber (consolidated thickness 75 mm or less) complete rolling to uniform smooth surface with 8 to 10 ton power road roller complete all as specified and directed.
4Preparing existing black top surfaces by brushing with steel wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt, etc complete all as specified and as directed by Engr - in - Charge.
5M & L for applying evenly a tack coat of Cationic Bitumen Emulsion (RS-1) conforming to IS: 8887 at a rate of application of 0.25 kg/sqm on bituminous surface as specified in Table 500-5 of MaRTH specification for road and bridge works 2013, using mechanical sprayer after cleaning of existing surface as specified and directed.
6M & L for bituminous premix semi dense asphaltic concrete (SDAC), 30 mm thick (consilidated average thickness) in single layer using paving bitumen of grade VG-30 with 5.5% binder content, mixed in hot mix plant using design mix and laid by mechanical paver and rolled and compacted with using 8 to 10 tonne cap vibratory power road roller to achive the required compactness, camber and gradient finished complete including (cutting of edges of roads straight and site clearance) etc all as specified and as directed by Engr - in- Charge.
7M & L for marking 2 mm thick center in stop line, dashes, arrows, brackets and similar work on road surfaces and like n. exc 15cm wide as per IRC pattern with thermo plastic paint of approved make and mix with 8% mica sign applicator machine, complete with traffic diversion arrangement. For example : Painting work on Zebra crossings, speed brakers etc.
8S&F in repairs cat eye reflective type metal body alloy of size 100mmx100mmx20mm with PAMA striplens reflector of model No DA 972.0 fixed with and incl MS Stud of size as per manufactures instructions etc complete all as specified and directed.
9S&F in repair, metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1, complete all as specified and directed.
10S & F in repair 750mm dia convex mirror mounted on metal sheet body and frame work suitable for road side mounted on angle iron 50x50x6mm for mirror botton each 1.20m high above GL and fixed with PCC 1:3:6 type C2 including demolition and including preparation of new steel surfaces and applying two coat synthetic enamel paint over acoat of red oxide complete all as specified.
11M&L for Plain cement concrete (1:2:4) type B-2 (using 40 mm graded stone aggregate) as in sub base of flooring/ hard standing including demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) including removing of debries out side MoD land complete all as specified and directed by Engineer-in-charge.
12M&L for stone sett flooring with stone setts of size 200 to 250mm long, 150 to 200mm wide and 150mm deep and sides dressed; bedded in cement mortar 1:3, joints 20mm thick; grouted in cement mortar 1:2 with an admixture of metallic floor hardner 5% by weight of cement and struck flush including dismantling of stone sett paving pointed in any mortar of any description or thickness complete all as specified and directed.Note:- Stone for the setts shall be of the best quality, granite, trap, basalt or quartzite. Use of sedimentary stone shall not be permitted. Stone setts shall be approximately rectangular in shape with a tolerance of plus or minus 12 mm.
13Fixing only except Stone sett flooring with stone setts of size 200 to 250mm long, 150 to 200mm wide and 150mm deep and sides dressed; bedded in cement mortar 1:3, joints 20mm thick; grouted in cement mortar 1:2 with an admixture of metallic floor hardner 5% by weight of cement and struck flush complete all as specified and directed.
14M & L for providing plain cement concrete type B-1, 1:2:4, (using 20 mm graded crushed stone aggregate), as in benching, copings, bed block for filing hollow space of steel chowkhats, including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required and including demolition of concrete in ground floor and paving n exc 15 cm thickness (below above ground level) complete all as specified and directed.complete all as specified and directed.
15Demolition of Concrete in ground floors and pavings n exc 15 cm thickness(below or above ground level) and remove the debries out side of MoD land completed all as specified and directed by Engineer-In-Chrge.
16M&L for cement concrete 1:4:8, type D-2, using 40 mm graded stone aggregate, as in Sub base for floor all as specified .
17M&L for rubber moulded supplying and laying 80mm thick factory made chamfered edge cement concrete paver block of M-25 grade with approved colour, design & pattern as in footpath,parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratorymethod using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand,compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.Note: colour and design as approved by GE
18M & L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete all as specified.
19Notes: For item No 6, Aggregate shall be obtained from Barmer only with black in colour and also Design Mix shall be prepared accordingly. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58645668
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 47.85 Lakhs
LAST DATE 12-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Repairs And Resurfacing Of Road , Culvert, Retaining Wall Of Pocket No 5 And Its Allied Units At Jaisalmer Mil Stnunder Ge (A) Jaisalmer
Basic Detail
Tender No 84510/C/E8
Bidding Type Tender
Location
City Jaisalmer
State Rajasthan
Key Dates
Publish Date 20 Nov 2026
Submission Date 12 Dec 2026
Open Date 14 Dec 2026
Finance
Tender Value 47.85 Lakhs
Tender Fee 500
EMD 96000
Exemption Available
Document List
48416eb9-de81-47c5-a9fb-2c6532a3fc3f.html
BOQ_897248.xls
TENDER1.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 20, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 12, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 20 days
Dec 14, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 22 days

Tender Documents

Download All (ZIP) ↓
html

48416eb9-de81-47c5-a9fb-2c6532a3fc3f.html

xls

BOQ_897248.xls

pdf

TENDER1.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender