Housing Urban and Rular Development Government Departments Closing in 8 days TDR #58645451

Tender For Maintenance And Repair Work At Honble Judge Bungalow F-09 (Mandovi) At Altinho- Panaji-Goa.

Issued by Government Departments · goa, Goa
Tender Value
21.50 Lakhs
Estimated cost
Bid Submission
30 Nov 2026
8 days left
EMD
43002
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
goa → Goa
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Maintenance And Repair Work At Honble Judge Bungalow F-09 (Mandovi) At Altinho- Panaji-Goa.

BOQ

Name of Work:- Maintenance and repair work at Honble Judge Bungalow F-09 (Mandovi) at Altinho- Panaji-Goa.
Sl. No. Item Description
1Removing old loose bottom or side cover of RCC slab beam columns etc. rubbing surface of concrete steel using wire brush and applying 2 coats of Alkaline rust converting primer (Feovert) after a waiting time of 6 hrs between coats and then applying another anti corrosive protective coating system ) for reinforcement bars (IPNet-RB) Conforms to IS-2770 Part-1 (Pull out Test) ASTM-3963-86 (Adhesion Test) and then applying concrete penetrating corrosion inhibitor (EPCO-KP100) and applying bonding new to old concrete (Epibond) Conforms to ASTM-C-882-87 and plastering on the fresh bond coat with Polymer Modified Mortar (Monobond) with 20mm C.M 1:3 and finishing coat of 6mm C.P 1:3 (1 Cement : 3 Sand ) incl. cost of transport etc. as per dir of EIC. All the chemicals will be of Krishna Conchem Products Pvt. Ltd. or Equivalent.
2Removing dry or oil bound distemper by scrapping sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
3Providing and applying white cement based putty of average thickness 1.00mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete.
4Applying one coat of distemper primer of approved brand and manufacture on wall surface.
5Wall painting (two or more coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade.
6Painting three or more coats with acryllic exterior paint of approved brand and manufacture (Such as Dulex/ Asian Paints/ Sherwin Willians) including applying one coat of cement primer and one coat of surface treatment etc. complete.
7Painting one or more coats with superior quality ready mixed paint of wood work of approved brand & manufacture in all shades on old work to give an even shade.
8Applying priming coat with ready mixed primer of approved brand and manufacture on wood work complete.
9Painting one or more coats with superior quality ready mixed paint of steel work of approved brand & manufacture in all shades on old work to give an even shade.
10Applying priming coat with ready mixed primer of approved brand and manufacture on steel work.
11Painting with two or more coats of floor coat emulsion of Indigo or equivalent make on interlocking pavers/chequerd tile flooring in pattern as approved by the engineer in charge, including pressure washing surface with water to remove loose dust and scrubbing with wire brush to remove algae, fungus ans moss growth, grass from joints, acid washing the floor with diluted HCL to remove oil, grease and wax including application of one coat of base primer etc complete.
12Providing and fixing fly proof galvanized M.S. wire gauge of I.S. gauge designation 140 g. with wire of dia. 0.56 mm to windows and clerestory windows including 62 x 19 mm beading of second class Indian wood .
13Providing anti – termite treatment to buildings conforming to I.S.S. 6113 part II 1971 (revised) including adopting precautions for health hazards and safety measures as required therein with the cost of all materials chemicals plants equipments required for the treatment and furnishing a guarantee for a minimum period of 10 years from the date of completion including eradicating any infestation of termite free of cost during the guaranty period complete. (The payment will be made on plinth of the building.;Post construction
14Dismantling the tile work in floors and roofs laid in cement including stacking of materials within 50 meters lead for thickness of tiles 10mm to 25mm.
15Providing and fixing 1st quality ceramic glazed wall tiles (Johnson Somany Kajaria )conforming to IS:15622 (thickness to be specified by the manufacture of approved make in all colours shades except burgundy bottle green black of any size as approved by Engineer-in-charge in skirting risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand ) and jointing with grey cement slurry @3.3kg per sq.m including pointing in white cement mixed with pigment of matching shade complete.;Wall Ceramic Glazed Tiles : 300 x 450
16Providing and and laying antiskid floor tiles 12 x 12 upto 16 x 16 in of Johnson Somany Kajaria (thickness to be specified by the manufacturer) of 1st quality conforming to IS:15622 of approved make in shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc. complete;Dark Shades
17Providing and fixing white vitereous china pedestal type (Europen type) water closet with seat as lid whth C.I. brass hinges and rubber fitings 15 lts white vitreous china low level flushing cistern with fittings as brackets 40 mm white precelain 3enameled flush bad 25 mm overflow pipe with specials and mosquito proof coupling of approved municipal design complete including cutting and making good the walls and floors where required.;W.C. pan with white plastic seat and lid
18Providing and fixing vitreous china wash basin with RS or C.I. brackets painted white 15 mm C.P. brass pillar taps C.P. brass chain with rubber plug 32 mm C.P. brass waste of pattern 32 mm diameter M.I. or C.P. brass trap and union complete including cutting and making good the walls where required.;Flat back wash basin size 630x 450mm with a single 15 mm C.P. brass pillar taps.
19Providing and fixing NICKEL chrome plated copper alloy Fancy wall mixer with 3 IN 1 SYSTEM WITH 115MM long bend pipe for connection to over head shower Jaquar make or equivalent. Confirming to IS 8931;1993
20Providing & fixing bevelled edge mirror of superior glass (5mm thk) of approved Quality shape & size complete with CP brass screws and washers Cleats CP studs etc Complete.
21Providing and fixing nahani trap of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete without door :;110 mm dia
22Providing & fixing c.p. brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C. P. brass screws;750 x 20 mm size
23Providing & fixing soap dish chromium plated with brackets fixed to wooden cleats with CP brass screw
24Providing and fixing NICKEL chrome plated copper alloy Fancy Two Way Bib Cock with single knob and wall flange conforming to IS 8931:1993 15mm nominal bore.
25Providing and fixing Hand Shower (Health Faucet) with 8mm dia ABS/brass body with double lock 1.00m long Flexible tube (Brass plated stainles steel flexible hose) and wall hook of approved quality confirming to IS standards.
26Providing and fixing NICKEL chrome plated copper alloy Fancy concealed stop cock with sheet flance 20mm Jaquar make or equivalent. Confirming to IS 8931;1993;20mm nominal bore
27Melamine polishing on wood work (one or more coat);Matt
28Providing and fixing in position 2mm thick one side embossed clear polycarbonate sheet in same profile to match the roofing sheets including self tapping screws.
29Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc.;20 mm dia nominal outer dia pipes.
30Extra for providing and fixing prince or equivalent make PVC SWR single socket elbow for socketed half round eaves gutters.;75 mm nominal size
31Providing and fixing single tee of rigid PVC (approved make) for S.W.R. pipes including lubricating etc. complete without door:;75 mm dia.
32Providing and fixing ASTM UPVC pipe conforming to ASTM 2467 with ISO 14001 including all UPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall.;SCH-80(blue)/(white);25mm outer dia.
33Providing and fixing 4 mm thick plywood plain lining with necessary screws priming coat on unexposed surface etc. complete with;Marine ply facing of approved manufacture
34Providing, fabricating and installing a wooden wardrobe.The wardrobe consist of vertical compartments with full-height shutters. Internal framework including vertical partitions, horizontal shelves, and supports shall be made from 10 mm marine plywood, while the back panel shall be of 6 mm marine plywood securely fixed. All shutters shall be finished with 1 mm thick laminate (approved shade) on the outer surface and balancing laminate on the inner side. The work includes providing and fixing all necessary hardware fittings such as stainless steel soft-close hinges (3–4 per shutter), handles (1 per shutter), and locks (1 per shutter – Godrej/Dorset/Europa or equivalent). Magnetic catchers, shelf supports, and all required accessories will be included to complete the wardrobe as per site conditions.
35Providing and fixing of kitchen counter with 10mm thick marine ply box all around and back side 10mm thick marine ply with shutter and drawer front of 10mm thick marine ply and drawer side in 10mm thick marine ply and base in 10mm thick marine ply shutter with patti outside finish with 1mm thick laminate and inside 1mm thick off-white laminate finish including all fitting accessories.
36Providing and Fixing of SS kitchen cutlery basket of size 19X20 inch.
37Providing and fixing of SS drawer channel for kitchen basket, pull out etc.
38Deep cleaning involves cleaning every room surface from top to bottom, getting into all the nooks and crannies, and getting rid of any dirt, grime or build-up. services with trained experts, specialized equipment, and considerable effort. Services include removing build-up of any kind, cleaning floors, refinishing floors, tile and grout cleaning, carpet cleaning, disinfecting all surfaces, cleaning upholstery, and more. (The payment will be made on plinth of the building.)
39Providing cup lock scaffolding material on rent installation and dismantling one time.
40(A) By tipper truck including loading unloading and stacking;(B) Sand stone metal and soling;Sand stone metal below 40 mm;1KM
41Providing and fixing bright finished brass tower bolts (barrel type) with screws etc. complete;150 x 10 mm
42Provided and fixing 150 mm chromium plated brass floor door stopper with rubber cushion screws etc. to suit shutters thickness complete. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58645451
AUTHORITY Government Departments
TENDER VALUE 21.50 Lakhs
LAST DATE 30-11-2026
Authority
Authority Name Public Works Department
Work Description Tender for Maintenance And Repair Work At Honble Judge Bungalow F-09 (Mandovi) At Altinho- Panaji-Goa.
Basic Detail
Tender No PWD/WDI/ASW-17/2026-27/41/05
Bidding Type Tender
Location
City goa
State Goa
Key Dates
Publish Date 20 Nov 2026
Submission Date 30 Nov 2026
Open Date 01 Dec 2026
Finance
Tender Value 21.50 Lakhs
Tender Fee 5000
EMD 43002
Exemption Not Available
Document List
7d746ff0-cb4f-4c04-8429-e599311f611e.html
BOQ_33814.xls
Tendernotice_1.pdf
Tendernotice_2.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 20, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 30, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 8 days
Dec 01, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 9 days

Tender Documents

Download All (ZIP) ↓
html

7d746ff0-cb4f-4c04-8429-e599311f611e.html

xls

BOQ_33814.xls

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender