Power Government Departments Closing in 11 days TDR #58645369

Tender For Under The Electricity Secondary Works Division, Gorakhpur Under The Construction Of New 33/11 Kv Sub-Station Laxmipur (2X5 Mva), Construction Of New 33 Kv Laxmipur Line From 132/33 Kv Substation Padrauna For Proposed Ss Laxmipur And The Co

Issued by Government Departments · Kushi Nagar, Uttar Pradesh
Tender Value
Ref. Documents
Estimated cost
Bid Submission
02 Dec 2026
11 days left
EMD
2.15 Lakhs
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Kushi Nagar → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Under The Electricity Secondary Works Division, Gorakhpur Under The Construction Of New 33/11 Kv Sub-Station Laxmipur (2X5 Mva), Construction Of New 33 Kv Laxmipur Line From 132/33 Kv Substation Padrauna For Proposed Ss Laxmipur And The Construction Of 11 Kv 04 No. Feeders From Proposed 33/11 Kv S/S Laxmipur, Distt. Kushinagar Under The Business Plan 2026-27 On The Basis Of Semi Turnkey.

BOQ

Name of Work:- Under the Electricity Secondary Works Division, Gorakhpur under the construction of New 33/11 KV Sub-Station Laxmipur (2x5 MVA), construction of new 33 KV Laxmipur line from 132/33 KV substation Padrauna for proposed SS Laxmipur and the construction of 11 KV 04 no. Feeders from proposed 33/11 KV S/S Laxmipur, Distt. Kushinagar under the business plan 2026-27 on the Basis of Semi Turnkey.
Sl. No. Item Description
1Part A (Materials Provided by contractor) Sub-Station work
233 KV Ploymer Pin insulators
3PG Clamp Dog to Dog Conductor
4PG Clamp Panther to Dog Conductor
5Cable Jointing Kit 3×300 mm outdoor
6Cable Jointing Kit 3×300 mm indoor
7Cable Jointing Kit 3×185 mm outdoor
8Cable Jointing Kit 3×185 mm indoor
9Extra Support Angle (MS Dropper Channel)
10G I Pipe 6'' Dia
1111 KV Disc Insulator B&S Polymeric Type
1211 KV Disc Fitting
13PG Clamp weasel to weasel
14Danger Board with clamp and Nut & Bolt
15Barbered Wire
16Nut Bolt and washer all sizes
17Stay set complete (Stay Rod 16x1800mm, Stay wire 5kg, Stay clamp, with bolt & nut)
18Earthing of Pole by M S Earthing Rod 20 x 2500 mm and 6 SWG earthing wire etc
19Holding Clamp for GI Pipe
20Holding Clamp for cable
21Holding Clamp for Top, Droper
22Lug for ACSR Dog Conductor/Weasel
23L.T.P.V.C. Cable 3½×70 mm2
24Terminal Gantry
25Bus Bar complete with structure and required all materials (acsr panther conductor, insulator and pg clamps etc)
26Cable Stand with MS Channel
27L Type Structure for Neutral Stand
2824 Volt Battery & Battery Charger/Inverter with cabinet
29Armoured Cu. Control Cable 2×2.5 mm2
30Armoured Cu. Control Cable 4×2.5 mm2
3111 KV T.P. M.O. Switch with fixing clamps
3211 KV Fuse set with fixing clamps.
33Rubber Mat
34Fire Fighting equipments including 02 no 10 kg,02 Nos. 4.5 Kg. CO2 Fire Extinguisher potable type and 02 Nos. machenical Foam type Fire Extinguisher potable type
35Fire Bucket with sand and stand
36Substation Furniture (4–fiber Chairs,2-wooden chair,1- revolving chair, 2–Table with drawer, 2–Bench, 1–Chauki, 2–Stool,1-wall clock,2-almirah,1-notice board,1-key board)
37Sundry items
38T&P of Substation switchgears(Hand Gloves-05 Set,Safety Helmets-5 Set, Safety Belts-4 Set, Tool kit Box-1,Pliers-05 Nos, Meggar-1 No, Multimeter-1 No, earth chain,ladder,Discharge Rod-3 No.)
39Part -B – WORKShifting, Loading Carriage & Unloading of following materials from store centre Kushinagar to work site
40ACSR Dog Conductor
4111 KV XLPE Cable3×300 mm2
4211 KV XLPE Cable3×185 mm2
43PCC Pole 11 M Long
4411 KV Top Channel
4533 KV line Isolator
46Structure for line Isolator
4733 KV Bus Isolator
48Structure for Bus Isolator
4933 KV post insulators
50Structure for Post Insulator
5133 KV C. T
52C.T Structure
5333 KV PT(Outdoor)
54PT Structure
5533 KV Fuse Set
56Fuse Set Structure
5733 KV Lightning Arrestors
58LA Structure
5933 KV VCB 800A, 750 MVA with Structure
6033 KV Control Panel for Single T/F
6133KV Control Pannel for single feeder
6290 Lbs. Rail pieces for T/F Wt. 44.6 Kg/Mtr.
6311 KV VCB (Incoming) 600/300/5A 350 MVA
6411 KV VCB (Out going) 200/100/5A 350 MVA
6511 KV Bus Coupler
6663 KVA 11/0.4 KV Transformer
67Erection, grouting, painting of following fabricated structures as per RESSPO Drawing.
6833 KV Bus bar Gantry
6933 KV Terminal Gantry
7033 KV Isolator structure
7133 KV L.A. structure
7233 KV Post insulator structure
7333 KV fuse set structure
7433KV C.T. Structure
7533KV P.T. Structure
7633 KV VCB Structure
77Insttalation, mounting and fitting of equipment on erected structures as per RESSPO Drawing.
7833 KV Line isolator complete
7933 KV Bus isolator complete
8033 KV L.A.
8133 KV Post insulator complete
8233 KV fuse set
8333KV C.T.
8433KV P.T.
8533 KV VCB
86Construction of power transformer plinth for 05 MVA transformer of size 3.46 x 4.46 x 1.5 mtr or as per site requirement. including cost of all material as per requirement.(As per UPPCL Drawing No-43)
87Transformer body earthing complete including cost of G.I. strip, G.I. pipe 1.5” dia 60’ long and other earthing materials. (delta type) (As per UPPCL Drawing)
88Neutral earthing of 5 MVA transformer complete including cost of G.I. strip, G.I. pipe 1.5” dia 60’ long and other earthing materials. (delta type) (As per UPPCL Drawing)
89Indoor Equipment earthing (11 kv pannels) including cost of G.I. strip, G.I. pipe 1.5” dia 60’ long and other earthing materials. (delta type) both delta earthing will be connected with 32mm round bar (As per UPPCL Drawing no-44)
90Separate earthing of Indoor Equipment (33 kv control pannel) including cost of G.I. strip, G.I. pipe 1.5” dia 40’ long and other earthing materials. (delta type)
91Special earthing of LA including cost of G.I. strip, G.I. pipe 1.5” dia 40’ long and other earthing materials. (delta type)
92Providing and Making of Outdor Earthing (Eartmat) as per UPPCL Norms.Drawing no-48
93Laying of 11 KV “XLPE” cable 3 x 185/300 mm2 including digging of pits of size 0.5 x 0.5 mtr. covering of cable with sand and 1st class bricks around and top of the cable or laying in cable trench and covering with brick and sand as per site requirement. (As per UPPCL Drawing)
94Rising of cable on DP/Cable Stand with GI Pipe 6\\" dia 3mtr long for cable safety.
95Providing and erection of Special pipe earthing for cable protection.
96Stringing of Terminal gantry and Making all Jumpers with provided all required material.complete work.
97Stringing of 33 KV Bus Bar and Making all Jumpers in Switchyard with provided all required material .complete work
98Providing & grouting of Neutral stand with all required materials.
99Providing & Grouting of cable stand and fastening cable by clamp with nuts and bolts mounting of cable at cable stand and connection of jumpers.
100Writing name on S/S Building 11 KV Switchgear panels & all equipments insatalled in control room & switchyard.
101Jointing charges of 11 KV “XLPE” C/J kit 3 x185/300 mm2 indoor/outdoor.
102Installation and connection of 63 KVA T/F with all accessories
103Fitting & Fixing of TPMO and Fuse set on erected 11 KV D/P.
104Making of control cable trench with cover and hanger by providing all required materials. as per site requirement.(as per drawing no.-46&47)
105Laying from switchyard to control room for 33 KV panel, CT, VCB, 5 MVA t/F by digging trench and making connection complete. (As per site requirement laying of cable though cable trench if available with covering brick and sand.
1062 x 2.5 mm2
1074 x 2.5 mm2
108Providing and writing of Sub-Station Name & Arrow shine Board Complete.
109Shifting of 33/11 KV switchgear to control room and placing in control room with grouting of bolts and mounting of switchgear panels properly.
110Electrical connection of 33/11 KV switchgear panel and fitting of Bus Bar.
111Construction of SSO's approached road 1.5 Mtr. wide in Switchyard by laying dry sand and interlocking bricks The work include proper plastering top & side of road and leveling & dressing of earth beneath the brick work on edge.(Drawning No-56)
112Laying of LT cable 3.5x70 sqmm
113Outdoor switch yard & approch road colony lighting with Provide 06 no. street light pole,150 watt LED light and all required materials
114Installation of 33 KV control panel for “VCB” with complete earthing and connection of battery and battery charger/inverter in control room and making all protection equipment connection.
115installation & Concreting of Stay set complete
116Filling of sand in cable trench in the Switch Gear Room.
117Installation of 24 V Battery & Battery Charge/ Inverter with cabinet
118Erection, grouting of 2 Nos. PCC Poles 11 m long for making DP Structure including fabrication & fixing of M.S. Channel, M.S. Angle, TPMO, Fuse Set, disc Insulators etc. The work includes supply and fixing of necessary clamps with nuts, bolts and washers. The work also includes grouting of Double pole support in C.C. 1:4:8 (cement, sand & brick ballast) in block of size (0.45m x 0.45 x 1/6 length of the pole) including earthing of Double pole with M.S. earthing rod complete in all respect.
119Construction of Fire Wall between Transformers with all required material. (As per UPPCL Drawing)
120Providing of Misc. Items i.e. all type register ,Single Line Diagram ,Shut Down/Breakdown Name Board, Writing name on Substation Building,name of feedar & switchgear
121Testing & commissioning charges of Substation.
122Part A (Materials Provided by contractor) 33 KV Line
123Clamp for 33 KV \\"V\\" type Cross arm with bolts and nuts
124F-bracket for 33 KV
125Polymeric 33KV Pin Insulator
126Danger Plate with clamp and Nut & Bolt
127G I Barbed Wire
128Nut Bolt and washer all sizes
129Earthing of Pole by M S Earthing Rod 20 x 2500 mm and 6 SWG earthing wire etc
13033 KV angle for side arm
131Clamps for side arm angle
132‘E’ Bracket for 33 KV
133Stay complete ( GI Stay ROD 20X1800mm , stay wire 7/8 SWG 10 kg, stay clamp, nut bolt and washer)
134Holding Clamp for Top,MS droper channel
135Disc Fitting for drop B&S type
136Disc Insulator B&S Polymeric Type
137PG Clamp Dog to Dog
138MS Angle Iron 65x65x6 mm Bracing 4300 mm long
139Holding clamp for Bracing Angle
140Extra Support Angle(M S Channel )
141clamps for side arm angle
142G I Pipe 6\\" Dia
143Holding Clamp for GI Pipe
144Holding Clamp for cable
145Lug for ACSR Dog Conductor
146MS Guarding Angle
147Guarding Angle Clamp
148GI Wire 6 SWG
149GI Wire 8 SWG
15033 KV ‘XLPE’ C/J Kit 3x300mm² Outdoor
15133 KV ‘XLPE’ C/J Kit 3x300mm² Straight Through
152Part -B – WORKShifting,loading and carriage of following materials on private truck at store centre Padrauna & Un-loading of the same with proper stacking at work site.
153PCC pole 9mtr
154PCC pole 11mtr
15533KV \\"V\\" type Cross arm 100 x 50 x 6 mm,
156Top Channel 125x65 mm, 3200 mm long
15733KV Xlpe cable 3x300sq.mm
158Acsr Dog Conductor
159Laying of 33 KV 3x300Sq.mm, XLPE Cable including cost of Sand & Bricks , As per site requirement HDD (trenchless) method can be used.
160Jointing charge of 33 KV ‘XLPE’ C/J Kit 3x300 mm² Outdoor /Straight Through
161Labour charges for inserting of G.I. Pipe, Rising of 33 KV cable in air,looping of 33KV XLPE Cable and jumpering complete work.
162Special GI Pipe earthing upto water level for 33 KV Jointing Kit with materials.
163Erection of Single pole structure on 9 Mtr PCC Pole including all works of evocation of pit, pole erection, making plinth for poles, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (‘V' type cross arm 100 x 50 x 6 mm, clamps with bolt and nut, composite polymer pin insulator, danger board with clamp, barbed wire earthing, etc. complete).
164Erection of Single pole structure on 9 Mtr PCC Pole For Housing Side arm ,including all works of evocation of pit, pole erection, making plinth for poles, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (33 KV angle for side arm, clamps with bolt and nut, composite polymer pin insulator, danger board with clamp, barbed wire earthing, etc. complete).
165Erection of Double pole structure on 9 Mtr PCC Pole including all works of evocation of pit, pole erection, making plinth for poles, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete).
166Erection of Four pole structure on 9 Mtr PCC Pole including all works of evocation of pit, pole erection, making plinth for poles, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete).
167Erection of Double pole structure on 9 mtr PCC Pole for One side O/H and One side Cable Rising including all works of evocation of pit, pole erection, making plinth for Poles, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete) .
168Erection of Double pole structure on 9 mtr PCC Pole for Cable Rising only including all works of evocation of pit, pole erection, making plinth for Poles, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete) .
169Erection of Single pole structure on 11 Mtr PCC Pole including all works of evocation of pit, pole erection, making plinth for poles, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (‘V' type cross arm 100 x 50 x 6 mm, clamps with bolt and nut, composite polymer pin insulator, danger board with clamp, barbed wire earthing, etc. complete).
170Erection of Double pole structure on 11 Mtr PCC Pole including all works of evocation of pit, pole erection, making plinth for poles, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete).
171Erection of Four pole structure on 11 Mtr PCC Pole including all works of evocation of pit, pole erection, making plinth for poles, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete).
172Erection of Single pole structure on 11 Mtr PCC Pole For Housing Side arm ,including all works of evocation of pit, pole erection, making plinth for poles, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (33 KV angle for side arm, clamps with bolt and nut, composite polymer pin insulator, danger board with clamp, barbed wire earthing, etc. complete).
173Erection of Double pole structure on 11 mtr PCC Pole for One side O/H and One side Cable Rising including all works of evocation of pit, pole erection, making plinth for Poles, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete) .
174Erection of Double pole structure on 11 mtr PCC Pole for Cable Rising only including all works of evocation of pit, pole erection, making plinth for Poles, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete) .
175Grouting of stay rods (20 x 1800) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening &nozzling of stay wire with stay rod with the poles of required tension.
176Fabrication of 11/13 mtr. Long PCC 9/11 M pole by welding 3 mtr. long 5” dia M.S. pipe and flat iron 50 x 6 mm 12” long by providing M.S. pipe.
177Guarding between two poles like single poles, double poles, four poles, etc. to guard LT, 11 KV Line telephone and river crossing, road crossing etc. with G.I. wire no. 6 SWG and G.I. wire no. 8 SWG, cutting, fabrication and fixing of guarding channel 75 x 40 x 3010 mm with clamps nut & bolts etc.
178Laying, spreading, lifting and final sagging of 3 phases of ACSR Dog conductor in accordance with profile and sag chart including binding, Jumpering and fixing of P.G. Clamp as per requirement in 03 Nos. conductor in parallel.
179Providing & Erection Cable Route Marker
180Tree Cutting Compensation
181Part A (Materials Provided by contractor) 11 KV 04 No. Feeder
182Clamp for 11 KV \\"V\\" type Cross arm with bolts and nuts
183F-bracket for 11 KV
184Polymeric 11KV Pin Insulator
185Danger Plate with clamp and Nut & Bolt
186G I Barbed Wire
187Nut Bolt and washer all sizes
188Earthing of Pole by M S Earthing Rod 20 x 2500 mm and 6 SWG earthing wire etc
18911 KV T-off Channel
190T-off Channel holding clamp with Bolts and Nuts
19111 KV Polymer Disc Insulator T&C Type
19211 KV. Disc fitting T&C Type
193P.G. Clamp for Weasel
194Stay Complete ( stay Rod 16x1800 mm, stay wire 5 Kg, stay clamp with nut and bolt.)
195Holding Clamp for Top,Ms channel
196Bracing set 4.3 x 4.3 Mtr Angle Iron 65x65x6 mm with holding clamp
19711 KV E Bracket
198MS Guarding Angle With Clamp
199GI Wire 6 SWG
200Gi Wire 8 SWG
201Extra Support Angle(M S Channel )
202G I Pipe 6\\" Dia
203Holding Clamp for GI Pipe
204Holding Clamp for cable
205Lug for ACSR Weasel Conductor
206H/S O/D 11 KV 3x185 sqmm J/kit
207Shifting, Loading Carriage & Unloading of following materials from store centre Padrauna to work site
2088.5 Mtr PCC Pole
20911 Mtr PCC Pole
210ACSR Weasel Conductor
21111 KV 3x185 XLPE Cable
21211 KV \\"V\\" tyoe cross arm 65x65x6 mm, M S Angle
213Top Channel 100x50x6 mm, 2400 mm
214Erection of Sectional T-Off ,Single pole structure on 8.5 Mtr PCC Pole including all works of evocation of pit, pole erection, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories for Single circuit ( 'V' type cross arm 100 x 50 x 6 mm, M.S. Channel (7.9 Kg./M) clamps with bolt and nut, composite polymer pin, insulator, danger board with clamp, barbed wire earthing, etc. complete).
215Erection of Single pole structure on 8.5 Mtr PCC Pole including all works of evocation of pit, pole erection, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories for Single circuit ( 'V' type cross arm 100 x 50 x 6 mm, M.S. Channel (7.9 Kg./M) clamps with bolt and nut, composite polymer pin, insulator, danger board with clamp, barbed wire earthing, etc. complete).
216Erection of Double pole structure on 8.5 Mtr PCC Pole including all works of evocation of pit, pole erection, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories ((M.S. angle iron 65 x 65 x 6 mm bracing with clamps, 100x50mmX2240 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete)) .
217Erection of Single pole structure on 11 Mtr PCC Pole including all works of evocation of pit, pole erection, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories for Single circuit ( 'V' type cross arm 100 x 50 x 6 mm, M.S. Channel (7.9 Kg./M) clamps with bolt and nut, composite polymer pin, insulator, danger board with clamp, barbed wire earthing, etc. complete).
218Erection of Double pole structure on 11 Mtr PCC Pole including all works of evocation of pit, pole erection, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories ((M.S. angle iron 65 x 65 x 6 mm bracing with clamps, 100x50mmX2240 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete)) .
219Erection of Double Pole Str. on 8.5 Mtr PCC Pole for one side O/H & one side cable rising including all works of evocation of pit, pole erection, making plinth for poles , grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories (M S Channel 100x50 mm 2400 mm Long with clamps, 100x50mmX2240 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete).
220Erection of Double Pole Str. on 11Mtr PCC Pole for one side O/H & one side cable rising including all works of evocation of pit, pole erection, making plinth for poles , grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories (M S Channel 100x50 mm 2400 mm Long with clamps, 100x50mmX2240 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete).
221Grouting of stay rods (16 x 1800) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing.
222Guarding between two poles like single poles, double poles, four poles, etc. to guard LT, 11 KV Line telephone and river crossing, road crossing etc. with G.I. wire no. 6 SWG and G.I. wire no. 8 SWG, cutting, fabrication and fixing of guarding channel 75 x 40 x 3010 mm with clamps nut & bolts etc. as per drawing.
223Laying, spreading, lifting and final sagging of 3 phases of ACSR Dog conductor in accordance with profile and sag chart including binding, Jumpering and fixing of P.G. Clamp as per requirement in 03 Nos. conductor in parallel.
224Laying of 11 KV 3x185 mm² ‘XLPE’ cable of double circuit by digging pit & making trench in Proper size(1.2M depth x1M wide) below ground level by fixing bricks(4½˝)on both side of trench wall and 9˝ brick work at the centre of the trench along the cable.Fixing brick slab on top after filling sand around both the cable including cost of bricks/ as per site requirement HDD Method by drilling machine can be used.
225Laying of 11 KV ‘XLPE’ cable in air after providing 6” dia GI pipe 3 m long & Looping work Complete.
226Cable jointing charges of 11 KV XLPE Cable Outdoor
227Special Pipe earthing up to water level for 11KV Jointing Kit
228Chopping of branches of trees of eucalyptus, Neem, Keekar and other kind of trees along the route of the line and disposal of the same at suitable place. (Including existing line) Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58645369
AUTHORITY Government Departments
TENDER VALUE Ref. Documents
LAST DATE 02-12-2026
Authority
Authority Name Purvanchal Vidyut Vitaran Nigam Limited
Work Description Tender for Under The Electricity Secondary Works Division, Gorakhpur Under The Construction Of New 33/11 Kv Sub-Station Laxmipur (2X5 Mva), Construction Of New 33 Kv Laxmipur Line From 132/33 Kv Substation Padrauna For Proposed Ss Laxmipur And The Construction Of 11 Kv 04 No. Feeders From Proposed 33/11 Kv S/S Laxmipur, Distt. Kushinagar Under The Business Plan 2026-27 On The Basis Of Semi Turnkey.
Basic Detail
Tender No 48/EWC(G)/2026-27
Bidding Type Tender
Location
City Kushi Nagar
State Uttar Pradesh
Key Dates
Publish Date 20 Nov 2026
Submission Date 02 Dec 2026
Open Date 03 Dec 2026
Finance
Tender Value Ref. Documents
Tender Fee 5900
EMD 2.15 Lakhs
Exemption Not Available
Document List
0c8023f4-76f6-4e3c-a93c-8db39c80e547.html
48tenderform.rar
BOQ_2300563.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 20, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 02, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 11 days
Dec 03, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 12 days

Tender Documents

Download All (ZIP) ↓
html

0c8023f4-76f6-4e3c-a93c-8db39c80e547.html

rar

48tenderform.rar

xls

BOQ_2300563.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender